diff options
Diffstat (limited to 'include/configs/bf548-ezkit.h')
| -rw-r--r-- | include/configs/bf548-ezkit.h | 190 |
1 files changed, 0 insertions, 190 deletions
diff --git a/include/configs/bf548-ezkit.h b/include/configs/bf548-ezkit.h deleted file mode 100644 index 35cbebdfb8..0000000000 --- a/include/configs/bf548-ezkit.h +++ /dev/null @@ -1,190 +0,0 @@ -/* - * U-Boot - Configuration file for BF548 STAMP board - */ - -#ifndef __CONFIG_BF548_EZKIT_H__ -#define __CONFIG_BF548_EZKIT_H__ - -#include <asm/config-pre.h> - -/* - * Processor Settings - */ -#define CONFIG_BFIN_CPU bf548-0.0 -#define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_PARA - -/* - * Clock Settings - * CCLK = (CLKIN * VCO_MULT) / CCLK_DIV - * SCLK = (CLKIN * VCO_MULT) / SCLK_DIV - */ -/* CONFIG_CLKIN_HZ is any value in Hz */ -#define CONFIG_CLKIN_HZ 25000000 -/* CLKIN_HALF controls the DF bit in PLL_CTL 0 = CLKIN */ -/* 1 = CLKIN / 2 */ -#define CONFIG_CLKIN_HALF 0 -/* PLL_BYPASS controls the BYPASS bit in PLL_CTL 0 = do not bypass */ -/* 1 = bypass PLL */ -#define CONFIG_PLL_BYPASS 0 -/* VCO_MULT controls the MSEL (multiplier) bits in PLL_CTL */ -/* Values can range from 0-63 (where 0 means 64) */ -#define CONFIG_VCO_MULT 21 -/* CCLK_DIV controls the core clock divider */ -/* Values can be 1, 2, 4, or 8 ONLY */ -#define CONFIG_CCLK_DIV 1 -/* SCLK_DIV controls the system clock divider */ -/* Values can range from 1-15 */ -#define CONFIG_SCLK_DIV 4 - -/* - * Memory Settings - */ -#define CONFIG_MEM_ADD_WDTH 10 -#define CONFIG_MEM_SIZE 64 - -#define CONFIG_EBIU_DDRCTL0_VAL 0x218A83FE -#define CONFIG_EBIU_DDRCTL1_VAL 0x20022222 -#define CONFIG_EBIU_DDRCTL2_VAL 0x00000021 - -/* Default EZ-Kit bank mapping: - * Async Bank 0 - 32MB Burst Flash - * Async Bank 1 - Ethernet - * Async Bank 2 - Nothing - * Async Bank 3 - Nothing - */ -#define CONFIG_EBIU_AMGCTL_VAL 0xFF -#define CONFIG_EBIU_AMBCTL0_VAL 0x7BB07BB0 -#define CONFIG_EBIU_AMBCTL1_VAL 0xFFC27BB0 -#define CONFIG_EBIU_FCTL_VAL (BCLK_4) -#define CONFIG_EBIU_MODE_VAL (B0MODE_FLASH) - -#define CONFIG_SYS_MONITOR_LEN (1024 * 1024) -#define CONFIG_SYS_MALLOC_LEN (768 * 1024) - -/* - * Network Settings - */ -#define ADI_CMDS_NETWORK 1 -#define CONFIG_SMC911X 1 -#define CONFIG_SMC911X_BASE 0x24000000 -#define CONFIG_SMC911X_16_BIT -#define CONFIG_HOSTNAME bf548-ezkit - -/* - * Flash Settings - */ -#define CONFIG_FLASH_CFI_DRIVER -#define CONFIG_SYS_FLASH_BASE 0x20000000 -#define CONFIG_SYS_FLASH_CFI -#define CONFIG_SYS_FLASH_PROTECTION -#define CONFIG_SYS_MAX_FLASH_BANKS 1 -#define CONFIG_SYS_MAX_FLASH_SECT 259 - -/* - * SPI Settings - */ -#define CONFIG_BFIN_SPI -#define CONFIG_ENV_SPI_MAX_HZ 30000000 -#define CONFIG_SF_DEFAULT_SPEED 30000000 - -/* - * Env Storage Settings - */ -#if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_SPI_MASTER) -#define CONFIG_ENV_IS_IN_SPI_FLASH -#define CONFIG_ENV_OFFSET 0x10000 -#define CONFIG_ENV_SIZE 0x2000 -#define CONFIG_ENV_SECT_SIZE 0x10000 -#define CONFIG_ENV_IS_EMBEDDED_IN_LDR -#elif (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_NAND) -#define CONFIG_ENV_IS_IN_NAND -#define CONFIG_ENV_OFFSET 0x60000 -#define CONFIG_ENV_SIZE 0x20000 -#else -/* The BF548-EZKIT uses a top boot flash */ -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET) -#define CONFIG_ENV_OFFSET (0x1000000 - CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE -#define CONFIG_ENV_SECT_SIZE 0x8000 -#endif - -/* - * NAND Settings - */ -#if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_NAND) -#define CONFIG_BFIN_NFC_CTL_VAL 0x0033 -#define CONFIG_BFIN_NFC_BOOTROM_ECC -#define CONFIG_DRIVER_NAND_BFIN -#define CONFIG_SYS_NAND_BASE 0 /* not actually used */ -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#endif - -/* - * I2C Settings - */ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_ADI - -/* - * SATA - */ -#if !defined(__ADSPBF544__) -#define CONFIG_LIBATA -#define CONFIG_SYS_SATA_MAX_DEVICE 1 -#define CONFIG_LBA48 -#define CONFIG_PATA_BFIN -#define CONFIG_BFIN_ATAPI_BASE_ADDR 0xFFC03800 -#define CONFIG_BFIN_ATA_MODE XFER_PIO_4 -#endif - -/* - * SDH Settings - */ -#if !defined(__ADSPBF544__) -#define CONFIG_BFIN_SDH -#endif - -/* - * USB Settings - */ -#if !defined(__ADSPBF544__) -#define CONFIG_USB_MUSB_HCD -#define CONFIG_USB_BLACKFIN -#define CONFIG_USB_MUSB_TIMEOUT 100000 -#endif - -/* - * Misc Settings - */ -#define CONFIG_BOARD_SIZE_LIMIT $$(( 512 * 1024 )) -#define CONFIG_RTC_BFIN -#define CONFIG_UART_CONSOLE 1 -#define CONFIG_BFIN_SPI_IMG_SIZE 0x50000 - -#define CONFIG_ADI_GPIO2 - -#ifdef CONFIG_VIDEO -#define EASYLOGO_HEADER < asm/bfin_logo_230x230_gzip.h > -#define CONFIG_DEB_DMA_URGENT -#endif - -/* Define if want to do post memory test */ -#undef CONFIG_POST -#ifdef CONFIG_POST -#define CONFIG_POST_BSPEC1_GPIO_LEDS \ - GPIO_PG6, GPIO_PG7, GPIO_PG8, GPIO_PG9, GPIO_PG10, GPIO_PG11, -#define CONFIG_POST_BSPEC2_GPIO_BUTTONS \ - GPIO_PB8, GPIO_PB9, GPIO_PB10, GPIO_PB11 -#define CONFIG_POST_BSPEC2_GPIO_NAMES \ - 13, 12, 11, 10, -#define CONFIG_SYS_POST_FLASH_START 10 -#define CONFIG_SYS_POST_FLASH_END 127 -#endif - -/* - * Pull in common ADI header for remaining command/environment setup - */ -#include <configs/bfin_adi_common.h> - -#endif |