diff options
Diffstat (limited to 'include/configs/capricorn-common.h')
| -rw-r--r-- | include/configs/capricorn-common.h | 185 |
1 files changed, 185 insertions, 0 deletions
diff --git a/include/configs/capricorn-common.h b/include/configs/capricorn-common.h new file mode 100644 index 0000000000..254b3a5a76 --- /dev/null +++ b/include/configs/capricorn-common.h @@ -0,0 +1,185 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright 2017-2018 NXP + * Copyright 2019 Siemens AG + */ + +#ifndef __IMX8X_CAPRICORN_H +#define __IMX8X_CAPRICORN_H + +#include <linux/sizes.h> +#include <asm/arch/imx-regs.h> + +#include "siemens-env-common.h" +#include "siemens-ccp-common.h" + +/* SPL config */ +#ifdef CONFIG_SPL_BUILD + +#define CONFIG_SPL_MAX_SIZE (124 * 1024) +#define CONFIG_SYS_MONITOR_LEN (1024 * 1024) +#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR +#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x800 +#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 0 + +#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv8/u-boot-spl.lds" +#define CONFIG_SPL_STACK 0x013E000 +#define CONFIG_SPL_BSS_START_ADDR 0x00128000 +#define CONFIG_SPL_BSS_MAX_SIZE 0x1000 /* 4 KB */ +#define CONFIG_SYS_SPL_MALLOC_START 0x00120000 +#define CONFIG_SYS_SPL_MALLOC_SIZE 0x3000 /* 12 KB */ +#define CONFIG_MALLOC_F_ADDR 0x00120000 + +#define CONFIG_SPL_RAW_IMAGE_ARM_TRUSTED_FIRMWARE +#define CONFIG_SPL_ABORT_ON_RAW_IMAGE + +#endif /* CONFIG_SPL_BUILD */ + +#define CONFIG_FACTORYSET + +#undef CONFIG_IDENT_STRING +#define CONFIG_IDENT_STRING GENERATE_CCP_VERSION("01", "07") + +#define CONFIG_REMAKE_ELF + +#define CONFIG_BOARD_EARLY_INIT_F + +/* Commands */ +#define CONFIG_CMD_READ + +#undef CONFIG_CMD_EXPORTENV +#undef CONFIG_CMD_IMPORTENV +#undef CONFIG_CMD_IMLS +#undef CONFIG_CMD_CRC32 +#undef CONFIG_BOOTM_NETBSD + +/* ENET Config */ +#define CONFIG_FEC_XCV_TYPE RMII +#define FEC_QUIRK_ENET_MAC + +/* ENET1 connects to base board and MUX with ESAI */ +#define CONFIG_FEC_ENET_DEV 1 +#define CONFIG_FEC_MXC_PHYADDR 0x0 +#define CONFIG_ETHPRIME "eth1" + +/* I2C Configuration */ +#ifndef CONFIG_SPL_BUILD +#define CONFIG_SYS_I2C_SPEED 400000 +/* EEPROM */ +#define EEPROM_I2C_BUS 0 /* I2C0 */ +#define EEPROM_I2C_ADDR 0x50 +/* PCA9552 */ +#define PCA9552_1_I2C_BUS 1 /* I2C1 */ +#define PCA9552_1_I2C_ADDR 0x60 +#endif /* !CONFIG_SPL_BUILD */ + +/* AHAB */ +#ifdef CONFIG_AHAB_BOOT +#define AHAB_ENV "sec_boot=yes\0" +#else +#define AHAB_ENV "sec_boot=no\0" +#endif + +#define MFG_ENV_SETTINGS_DEFAULT \ + "mfgtool_args=setenv bootargs console=${console},${baudrate} " \ + "rdinit=/linuxrc " \ + "clk_ignore_unused "\ + "\0" \ + "kboot=booti\0"\ + "bootcmd_mfg=run mfgtool_args;" \ + "if iminfo ${initrd_addr}; then " \ + "if test ${tee} = yes; then " \ + "bootm ${tee_addr} ${initrd_addr} ${fdt_addr}; " \ + "else " \ + "booti ${loadaddr} ${initrd_addr} ${fdt_addr}; " \ + "fi; " \ + "else " \ + "echo \"Run fastboot ...\"; fastboot 0; " \ + "fi;\0" + +/* Boot M4 */ +#define M4_BOOT_ENV \ + "m4_0_image=m4_0.bin\0" \ + "loadm4image_0=fatload mmc ${mmcdev}:${mmcpart} " \ + "${loadaddr} ${m4_0_image}\0" \ + "m4boot_0=run loadm4image_0; dcache flush; bootaux ${loadaddr} 0\0" \ + +#define CONFIG_MFG_ENV_SETTINGS \ + MFG_ENV_SETTINGS_DEFAULT \ + "initrd_addr=0x83100000\0" \ + "initrd_high=0xffffffffffffffff\0" \ + "emmc_dev=0\0" + +/* Initial environment variables */ +#define CONFIG_EXTRA_ENV_SETTINGS \ + CONFIG_MFG_ENV_SETTINGS \ + M4_BOOT_ENV \ + AHAB_ENV \ + ENV_COMMON \ + "script=boot.scr\0" \ + "image=Image\0" \ + "panel=NULL\0" \ + "console=ttyLP2\0" \ + "fdt_addr=0x83000000\0" \ + "fdt_high=0xffffffffffffffff\0" \ + "cntr_addr=0x88000000\0" \ + "cntr_file=os_cntr_signed.bin\0" \ + "initrd_addr=0x83800000\0" \ + "initrd_high=0xffffffffffffffff\0" \ + "netdev=eth0\0" \ + "nfsopts=vers=3,udp,rsize=4096,wsize=4096,nolock rw\0" \ + "hostname=capricorn\0" \ + ENV_EMMC \ + ENV_NET + +#define CONFIG_BOOTCOMMAND \ + "if usrbutton; then " \ + "run flash_self_test; " \ + "reset; " \ + "fi;" \ + "run flash_self;" \ + "reset;" + +/* Default location for tftp and bootm */ +#define CONFIG_LOADADDR 0x80280000 +#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR +#define CONFIG_SYS_INIT_SP_ADDR 0x80200000 + +#define CONFIG_BOOTCOUNT_LIMIT +#define CONFIG_BOOTCOUNT_ENV + +/* Environment organisation */ +#define CONFIG_ENV_OVERWRITE +#define CONFIG_SYS_MMC_ENV_DEV 0 /* USDHC1, eMMC */ +#define CONFIG_SYS_MMC_ENV_PART 2 /* 2nd boot partition */ + +/* On CCP board, USDHC1 is for eMMC */ +#define CONFIG_MMCROOT "/dev/mmcblk0p2" /* eMMC */ +#define CONFIG_SYS_MMC_IMG_LOAD_PART 1 + +/* Size of malloc() pool */ +#define CONFIG_SYS_MALLOC_LEN ((CONFIG_ENV_SIZE + (32 * 1024)) * 1024) + +#define CONFIG_SYS_SDRAM_BASE 0x80000000 +#define PHYS_SDRAM_1 0x80000000 +#define PHYS_SDRAM_2 0x880000000 +/* DDR3 board total DDR is 1 GB */ +#define PHYS_SDRAM_1_SIZE 0x40000000 /* 1 GB */ +#define PHYS_SDRAM_2_SIZE 0x00000000 /* 0 GB */ + +#define CONFIG_SYS_MEMTEST_START 0xA0000000 +#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + \ + (PHYS_SDRAM_1_SIZE >> 2)) + +/* Console buffer and boot args */ +#define CONFIG_SYS_CBSIZE 2048 +#define CONFIG_SYS_MAXARGS 64 +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE + +/* Generic Timer Definitions */ +#define COUNTER_FREQUENCY 8000000 /* 8MHz */ + +#define BOOTAUX_RESERVED_MEM_BASE 0x88000000 +#define BOOTAUX_RESERVED_MEM_SIZE SZ_128M /* Reserve from second 128MB */ + +#endif /* __IMX8X_CAPRICORN_H */ |