diff options
Diffstat (limited to 'include/configs/cl-som-imx7.h')
| -rw-r--r-- | include/configs/cl-som-imx7.h | 192 |
1 files changed, 192 insertions, 0 deletions
diff --git a/include/configs/cl-som-imx7.h b/include/configs/cl-som-imx7.h new file mode 100644 index 0000000000..14c471228f --- /dev/null +++ b/include/configs/cl-som-imx7.h @@ -0,0 +1,192 @@ +/* + * Copyright (C) 2015 CompuLab, Ltd. + * + * Configuration settings for the CompuLab CL-SOM-iMX7 System-on-Module. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __CL_SOM_IMX7_CONFIG_H +#define __CL_SOM_IMX7_CONFIG_H + +#include "mx7_common.h" + +#define CONFIG_DBG_MONITOR + +#define CONFIG_MXC_UART_BASE UART1_IPS_BASE_ADDR + +/* Size of malloc() pool */ +#define CONFIG_SYS_MALLOC_LEN (32 * SZ_1M) + +#define CONFIG_BOARD_LATE_INIT + +/* Uncomment to enable secure boot support */ +/* #define CONFIG_SECURE_BOOT */ +#define CONFIG_CSF_SIZE 0x4000 + +/* Network */ +#define CONFIG_FEC_MXC +#define CONFIG_MII +#define CONFIG_FEC_XCV_TYPE RGMII +#define CONFIG_ETHPRIME "FEC" +#define CONFIG_FEC_MXC_PHYADDR 0 + +#define CONFIG_PHYLIB +#define CONFIG_PHY_ATHEROS +/* ENET1 */ +#define IMX_FEC_BASE ENET_IPS_BASE_ADDR + +/* PMIC */ +#define CONFIG_POWER +#define CONFIG_POWER_I2C +#define CONFIG_POWER_PFUZE3000 +#define CONFIG_POWER_PFUZE3000_I2C_ADDR 0x08 + +#undef CONFIG_BOOTM_NETBSD +#undef CONFIG_BOOTM_PLAN9 +#undef CONFIG_BOOTM_RTEMS + +/* I2C configs */ +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_MXC +#define CONFIG_SYS_I2C_MXC_I2C2 /* Enable I2C bus 2 */ +#define CONFIG_SYS_I2C_SPEED 100000 +#define SYS_I2C_BUS_SOM 0 + +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 +#define CONFIG_SYS_I2C_EEPROM_BUS SYS_I2C_BUS_SOM + +#define CONFIG_PCA953X +#define CONFIG_CMD_PCA953X +#define CONFIG_SYS_I2C_PCA953X_ADDR 0x20 +#define CONFIG_SYS_I2C_PCA953X_WIDTH { {0x20, 16} } + +#undef CONFIG_SYS_AUTOLOAD +#undef CONFIG_EXTRA_ENV_SETTINGS +#undef CONFIG_BOOTCOMMAND +#undef CONFIG_BOOTDELAY + +#define CONFIG_BOOTDELAY 3 +#define CONFIG_SYS_AUTOLOAD "no" + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "autoload=off\0" \ + "script=boot.scr\0" \ + "loadscript=load ${storagetype} ${storagedev} ${loadaddr} ${script};\0" \ + "loadkernel=load ${storagetype} ${storagedev} ${loadaddr} ${kernel};\0" \ + "loadfdt=load ${storagetype} ${storagedev} ${fdtaddr} ${fdtfile};\0" \ + "bootscript=echo Running bootscript from ${storagetype} ...; source ${loadaddr};\0" \ + "storagebootcmd=echo Booting from ${storagetype} ...; run ${storagetype}args; run doboot;\0" \ + "kernel=zImage\0" \ + "console=ttymxc0\0" \ + "fdt_high=0xffffffff\0" \ + "initrd_high=0xffffffff\0" \ + "fdtfile=imx7d-sbc-imx7.dtb\0" \ + "fdtaddr=0x83000000\0" \ + "mmcdev_def="__stringify(CONFIG_SYS_MMC_DEV)"\0" \ + "usbdev_def="__stringify(CONFIG_SYS_USB_DEV)"\0" \ + "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \ + "usbpart=" __stringify(CONFIG_SYS_USB_IMG_LOAD_PART) "\0" \ + "doboot=bootz ${loadaddr} - ${fdtaddr}\0" \ + "mmc_config=mmc dev ${mmcdev}; mmc rescan\0" \ + "mmcargs=setenv bootargs console=${console},${baudrate} " \ + "root=/dev/mmcblk${mmcblk}p2 rootwait rw\0" \ + "mmcbootscript=" \ + "if run mmc_config; then " \ + "setenv storagetype mmc;" \ + "setenv storagedev ${mmcdev}:${mmcpart};" \ + "if run loadscript; then " \ + "run bootscript; " \ + "fi; " \ + "fi;\0" \ + "mmcboot=" \ + "if run mmc_config; then " \ + "setenv storagetype mmc;" \ + "setenv storagedev ${mmcdev}:${mmcpart};" \ + "if run loadkernel; then " \ + "if run loadfdt; then " \ + "run storagebootcmd;" \ + "fi; " \ + "fi; " \ + "fi;\0" \ + "sdbootscript=setenv mmcdev ${mmcdev_def}; setenv mmcblk 0; " \ + "run mmcbootscript\0" \ + "usbbootscript=setenv usbdev ${usbdev_def}; " \ + "setenv storagetype usb;" \ + "setenv storagedev ${usbdev}:${usbpart};" \ + "if run loadscript; then " \ + "run bootscript; " \ + "fi; " \ + "sdboot=setenv mmcdev ${mmcdev_def}; setenv mmcblk 0; run mmcboot\0" \ + "emmcbootscript=setenv mmcdev 1; setenv mmcblk 2; run mmcbootscript\0" \ + "emmcboot=setenv mmcdev 1; setenv mmcblk 2; run mmcboot\0" \ + +#define CONFIG_BOOTCOMMAND \ + "echo SD boot attempt ...; run sdbootscript; run sdboot; " \ + "echo eMMC boot attempt ...; run emmcbootscript; run emmcboot; " \ + "echo USB boot attempt ...; run usbbootscript; " + +#define CONFIG_SYS_MEMTEST_START 0x80000000 +#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x20000000) + +#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR +#define CONFIG_SYS_HZ 1000 + +/* Physical Memory Map */ +#define CONFIG_NR_DRAM_BANKS 1 +#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR + +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM +#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR +#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE + +#define CONFIG_SYS_INIT_SP_OFFSET \ + (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_ADDR \ + (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) + +/* SPI Flash support */ +#define CONFIG_SPI +#define CONFIG_MXC_SPI +#define CONFIG_SF_DEFAULT_BUS 0 +#define CONFIG_SF_DEFAULT_CS 0 +#define CONFIG_SF_DEFAULT_SPEED 20000000 +#define CONFIG_SF_DEFAULT_MODE (SPI_MODE_0) + +/* FLASH and environment organization */ +#define CONFIG_ENV_SIZE SZ_8K +#define CONFIG_ENV_OFFSET (768 * 1024) +#define CONFIG_ENV_SECT_SIZE (64 * 1024) +#define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS +#define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS +#define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE +#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED + +/* MMC Config*/ +#define CONFIG_FSL_USDHC +#ifdef CONFIG_FSL_USDHC +#define CONFIG_SYS_FSL_ESDHC_ADDR USDHC1_BASE_ADDR + +#define CONFIG_SYS_FSL_USDHC_NUM 2 +#define CONFIG_MMCROOT "/dev/mmcblk0p2" /* USDHC1 */ +#define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */ +#endif + +/* USB Configs */ +#define CONFIG_EHCI_HCD_INIT_AFTER_RESET +#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) +#define CONFIG_MXC_USB_FLAGS 0 +#define CONFIG_USB_MAX_CONTROLLER_COUNT 2 + +/* Uncomment to enable iMX thermal driver support */ +/*#define CONFIG_IMX_THERMAL*/ + +/* SPL */ +#include "imx7_spl.h" +#ifdef CONFIG_SPL_BUILD +#define CONFIG_SPL_SPI_LOAD +#define CONFIG_SYS_SPI_U_BOOT_OFFS (64 * 1024) +#endif /* CONFIG_SPL_BUILD */ + +#endif /* __CONFIG_H */ |