summaryrefslogtreecommitdiff
path: root/include/configs/colibri_vf.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/configs/colibri_vf.h')
-rw-r--r--include/configs/colibri_vf.h109
1 files changed, 51 insertions, 58 deletions
diff --git a/include/configs/colibri_vf.h b/include/configs/colibri_vf.h
index 31ff8a00a6..0d57e303a1 100644
--- a/include/configs/colibri_vf.h
+++ b/include/configs/colibri_vf.h
@@ -1,6 +1,6 @@
/* SPDX-License-Identifier: GPL-2.0+ */
/*
- * Copyright 2015-2016 Toradex, Inc.
+ * Copyright 2015-2019 Toradex, Inc.
*
* Configuration settings for the Toradex VF50/VF61 modules.
*
@@ -12,15 +12,12 @@
#define __CONFIG_H
#include <asm/arch/imx-regs.h>
+#include <linux/sizes.h>
#define CONFIG_SYS_FSL_CLK
#define CONFIG_SKIP_LOWLEVEL_INIT
-#ifdef CONFIG_CMD_FUSE
-#define CONFIG_MXC_OCOTP
-#endif
-
#ifdef CONFIG_VIDEO_FSL_DCU_FB
#define CONFIG_SPLASH_SCREEN_ALIGN
#define CONFIG_VIDEO_LOGO
@@ -32,7 +29,7 @@
#endif
/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * 1024 * 1024)
+#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * SZ_1M)
/* Allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
@@ -40,17 +37,6 @@
/* NAND support */
#define CONFIG_SYS_NAND_ONFI_DETECTION
#define CONFIG_SYS_MAX_NAND_DEVICE 1
-#define CONFIG_SYS_NAND_BASE NFC_BASE_ADDR
-
-/* Dynamic MTD partition support */
-
-#define CONFIG_SYS_FSL_ESDHC_ADDR 0
-#define CONFIG_SYS_FSL_ESDHC_NUM 1
-
-#define CONFIG_FEC_MXC
-#define IMX_FEC_BASE ENET1_BASE_ADDR
-#define CONFIG_FEC_XCV_TYPE RMII
-#define CONFIG_FEC_MXC_PHYADDR 0
#define CONFIG_IPADDR 192.168.10.2
#define CONFIG_NETMASK 255.255.255.0
@@ -62,13 +48,15 @@
/* We boot from the gfxRAM area of the OCRAM. */
#define CONFIG_BOARD_SIZE_LIMIT 520192
-#define SD_BOOTCMD \
- "sdargs=root=/dev/mmcblk0p2 rw rootwait\0" \
- "sdboot=run setup; setenv bootargs ${defargs} ${sdargs} ${mtdparts} " \
- "${setupargs} ${vidargs}; echo Booting from MMC/SD card...; " \
- "load mmc 0:2 ${kernel_addr_r} /boot/${kernel_file} && " \
- "load mmc 0:2 ${fdt_addr_r} /boot/${soc}-colibri-${fdt_board}.dtb && " \
- "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
+#define MEM_LAYOUT_ENV_SETTINGS \
+ "bootm_size=0x10000000\0" \
+ "fdt_addr_r=0x82000000\0" \
+ "fdt_high=0xffffffff\0" \
+ "initrd_high=0xffffffff\0" \
+ "kernel_addr_r=0x81000000\0" \
+ "pxefile_addr_r=0x87100000\0" \
+ "ramdisk_addr_r=0x82100000\0" \
+ "scriptaddr=0x87000000\0"
#define NFS_BOOTCMD \
"nfsargs=ip=:::::eth0: root=/dev/nfs\0" \
@@ -79,7 +67,15 @@
"tftp ${fdt_addr_r} ${soc}-colibri-${fdt_board}.dtb && " \
"run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
-#define UBI_BOOTCMD \
+#define SD_BOOTCMD \
+ "sdargs=root=/dev/mmcblk0p2 ro rootwait\0" \
+ "sdboot=run setup; setenv bootargs ${defargs} ${sdargs} ${mtdparts} " \
+ "${setupargs} ${vidargs}; echo Booting from MMC/SD card...; " \
+ "load mmc 0:1 ${kernel_addr_r} ${kernel_file} && " \
+ "load mmc 0:1 ${fdt_addr_r} ${soc}-colibri-${fdt_board}.dtb && " \
+ "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
+
+#define UBI_BOOTCMD \
"ubiargs=ubi.mtd=ubi root=ubi0:rootfs rootfstype=ubifs " \
"ubi.fm_autoconvert=1\0" \
"ubiboot=run setup; " \
@@ -90,36 +86,43 @@
"ubi read ${fdt_addr_r} dtb && " \
"run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
-#define CONFIG_BOOTCOMMAND "run ubiboot; run sdboot; run nfsboot"
+#define CONFIG_BOOTCOMMAND "run ubiboot; " \
+ "setenv fdtfile ${soc}-colibri-${fdt_board}.dtb && run distro_bootcmd;"
+
+#define BOOT_TARGET_DEVICES(func) \
+ func(MMC, mmc, 0) \
+ func(USB, usb, 0) \
+ func(DHCP, dhcp, na)
+#include <config_distro_bootcmd.h>
+#undef BOOTENV_RUN_NET_USB_START
+#define BOOTENV_RUN_NET_USB_START ""
#define DFU_ALT_NAND_INFO "vf-bcb part 0,1;u-boot part 0,2;ubi part 0,4"
#define CONFIG_EXTRA_ENV_SETTINGS \
- "kernel_addr_r=0x82000000\0" \
- "fdt_addr_r=0x84000000\0" \
- "kernel_file=zImage\0" \
- "fdt_file=${soc}-colibri-${fdt_board}.dtb\0" \
+ BOOTENV \
+ MEM_LAYOUT_ENV_SETTINGS \
+ NFS_BOOTCMD \
+ SD_BOOTCMD \
+ UBI_BOOTCMD \
+ "console=ttyLP0\0" \
+ "defargs=user_debug=30\0" \
+ "dfu_alt_info=" DFU_ALT_NAND_INFO "\0" \
"fdt_board=eval-v3\0" \
"fdt_fixup=;\0" \
- "defargs=\0" \
- "console=ttyLP0\0" \
- "setup=setenv setupargs " \
- "console=tty1 console=${console}" \
- ",${baudrate}n8 ${memargs}\0" \
+ "kernel_file=zImage\0" \
+ "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
"setsdupdate=mmc rescan && set interface mmc && " \
- "fatload ${interface} 0:1 ${loadaddr} flash_blk.img && " \
- "source ${loadaddr}\0" \
- "setusbupdate=usb start && set interface usb && " \
- "fatload ${interface} 0:1 ${loadaddr} flash_blk.img && " \
- "source ${loadaddr}\0" \
+ "fatload ${interface} 0:1 ${loadaddr} flash_blk.img && " \
+ "source ${loadaddr}\0" \
+ "setup=setenv setupargs console=tty1 console=${console}" \
+ ",${baudrate}n8 ${memargs}\0" \
"setupdate=run setsdupdate || run setusbupdate\0" \
- "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
- "dfu_alt_info=" DFU_ALT_NAND_INFO "\0" \
- "video-mode=dcufb:640x480-16@60,monitor=lcd\0" \
+ "setusbupdate=usb start && set interface usb && " \
+ "fatload ${interface} 0:1 ${loadaddr} flash_blk.img && " \
+ "source ${loadaddr}\0" \
"splashpos=m,m\0" \
- SD_BOOTCMD \
- NFS_BOOTCMD \
- UBI_BOOTCMD
+ "video-mode=dcufb:640x480-16@60,monitor=lcd\0"
/* Miscellaneous configurable options */
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
@@ -133,7 +136,7 @@
/* Physical memory map */
#define PHYS_SDRAM (0x80000000)
-#define PHYS_SDRAM_SIZE (256 * 1024 * 1024)
+#define PHYS_SDRAM_SIZE (256 * SZ_1M)
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
@@ -145,13 +148,6 @@
(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
/* Environment organization */
-
-#ifdef CONFIG_ENV_IS_IN_MMC
-#define CONFIG_SYS_MMC_ENV_DEV 0
-#define CONFIG_ENV_OFFSET (12 * 64 * 1024)
-#define CONFIG_ENV_SIZE (8 * 1024)
-#endif
-
#ifdef CONFIG_ENV_IS_IN_NAND
#define CONFIG_ENV_SIZE (64 * 2048)
#define CONFIG_ENV_RANGE (4 * 64 * 2048)
@@ -159,13 +155,10 @@
#endif
/* USB Host Support */
-#define CONFIG_USB_EHCI_VF
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
/* USB DFU */
-#define CONFIG_SYS_DFU_DATA_BUF_SIZE (1024 * 1024)
-
-/* USB Storage */
+#define CONFIG_SYS_DFU_DATA_BUF_SIZE (SZ_1M)
#endif /* __CONFIG_H */