diff options
Diffstat (limited to 'include/configs/controlcenterdc.h')
| -rw-r--r-- | include/configs/controlcenterdc.h | 228 |
1 files changed, 228 insertions, 0 deletions
diff --git a/include/configs/controlcenterdc.h b/include/configs/controlcenterdc.h new file mode 100644 index 0000000000..add5f90cc2 --- /dev/null +++ b/include/configs/controlcenterdc.h @@ -0,0 +1,228 @@ +/* + * Copyright (C) 2014 Stefan Roese <sr@denx.de> + * Copyright (C) 2016 Mario Six <mario.six@gdsys.cc> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _CONFIG_CONTROLCENTERDC_H +#define _CONFIG_CONTROLCENTERDC_H + +/* + * High Level Configuration Options (easy to change) + */ +#define CONFIG_CUSTOMER_BOARD_SUPPORT + +#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ +#define CONFIG_DISPLAY_BOARDINFO_LATE +#define CONFIG_BOARD_LATE_INIT +#define CONFIG_LAST_STAGE_INIT +#define CONFIG_SPL_BOARD_INIT + +/* + * TEXT_BASE needs to be below 16MiB, since this area is scrubbed + * for DDR ECC byte filling in the SPL before loading the main + * U-Boot into it. + */ +#define CONFIG_SYS_TEXT_BASE 0x00800000 + +#define CONFIG_SYS_TCLK 250000000 /* 250MHz */ + +#define CONFIG_LOADADDR 1000000 + +/* + * Commands configuration + */ +#define CONFIG_CMD_ENV +#define CONFIG_CMD_I2C +#define CONFIG_CMD_PCI +#define CONFIG_CMD_SCSI +#define CONFIG_CMD_SPI + +/* SPI NOR flash default params, used by sf commands */ +#define CONFIG_SF_DEFAULT_BUS 1 +#define CONFIG_SF_DEFAULT_SPEED 1000000 +#define CONFIG_SF_DEFAULT_MODE SPI_MODE_3 + +/* + * SDIO/MMC Card Configuration + */ +#define CONFIG_SYS_MMC_BASE MVEBU_SDIO_BASE + +/* + * SATA/SCSI/AHCI configuration + */ +#define CONFIG_LIBATA +#define CONFIG_SCSI +#define CONFIG_SCSI_AHCI +#define CONFIG_SCSI_AHCI_PLAT +#define CONFIG_SYS_SCSI_MAX_SCSI_ID 2 +#define CONFIG_SYS_SCSI_MAX_LUN 1 +#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ + CONFIG_SYS_SCSI_MAX_LUN) + +/* Additional FS support/configuration */ +#define CONFIG_SUPPORT_VFAT + +/* USB/EHCI configuration */ +#define CONFIG_EHCI_IS_TDI + +/* Environment in SPI NOR flash */ +#define CONFIG_ENV_IS_IN_SPI_FLASH +#define CONFIG_ENV_SPI_BUS 1 +#define CONFIG_ENV_OFFSET (1 << 20) /* 1MiB in */ +#define CONFIG_ENV_SIZE (64 << 10) /* 64KiB */ +#define CONFIG_ENV_SECT_SIZE (256 << 10) /* 256KiB sectors */ + +#define CONFIG_PHY_MARVELL /* there is a marvell phy */ +#define PHY_ANEG_TIMEOUT 8000 /* PHY needs a longer aneg time */ + +/* PCIe support */ +#ifndef CONFIG_SPL_BUILD +#define CONFIG_PCI +#define CONFIG_PCI_MVEBU +#define CONFIG_PCI_PNP +#define CONFIG_PCI_SCAN_SHOW +#endif + +#define CONFIG_SYS_ALT_MEMTEST + +/* + * Software (bit-bang) MII driver configuration + */ +#define CONFIG_BITBANGMII /* bit-bang MII PHY management */ +#define CONFIG_BITBANGMII_MULTI + +/* SPL */ +/* + * Select the boot device here + * + * Currently supported are: + * SPL_BOOT_SPI_NOR_FLASH - Booting via SPI NOR flash + * SPL_BOOT_SDIO_MMC_CARD - Booting via SDIO/MMC card (partition 1) + */ +#define SPL_BOOT_SPI_NOR_FLASH 1 +#define SPL_BOOT_SDIO_MMC_CARD 2 +#define CONFIG_SPL_BOOT_DEVICE SPL_BOOT_SPI_NOR_FLASH + +/* Defines for SPL */ +#define CONFIG_SPL_FRAMEWORK +#define CONFIG_SPL_SIZE (160 << 10) + +#if defined(CONFIG_SECURED_MODE_IMAGE) +#define CONFIG_SPL_TEXT_BASE 0x40002614 +#define CONFIG_SPL_MAX_SIZE (CONFIG_SPL_SIZE - 0x2614) +#else +#define CONFIG_SPL_TEXT_BASE 0x40000030 +#define CONFIG_SPL_MAX_SIZE (CONFIG_SPL_SIZE - 0x30) +#endif + +#define CONFIG_SPL_BSS_START_ADDR (0x40000000 + CONFIG_SPL_SIZE) +#define CONFIG_SPL_BSS_MAX_SIZE (16 << 10) + +#ifdef CONFIG_SPL_BUILD +#define CONFIG_SYS_MALLOC_SIMPLE +#endif + +#define CONFIG_SPL_STACK (0x40000000 + ((212 - 16) << 10)) +#define CONFIG_SPL_BOOTROM_SAVE (CONFIG_SPL_STACK + 4) + +#define CONFIG_SPL_LIBCOMMON_SUPPORT +#define CONFIG_SPL_LIBGENERIC_SUPPORT +#define CONFIG_SPL_SERIAL_SUPPORT +#define CONFIG_SPL_I2C_SUPPORT + +#if CONFIG_SPL_BOOT_DEVICE == SPL_BOOT_SPI_NOR_FLASH +/* SPL related SPI defines */ +#define CONFIG_SPL_SPI_LOAD +#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x30000 +#define CONFIG_SYS_U_BOOT_OFFS CONFIG_SYS_SPI_U_BOOT_OFFS +#endif + +#if CONFIG_SPL_BOOT_DEVICE == SPL_BOOT_SDIO_MMC_CARD +/* SPL related MMC defines */ +#define CONFIG_SPL_MMC_SUPPORT +#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION 1 +#define CONFIG_SYS_MMC_U_BOOT_OFFS (168 << 10) +#define CONFIG_SYS_U_BOOT_OFFS CONFIG_SYS_MMC_U_BOOT_OFFS +#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR (CONFIG_SYS_U_BOOT_OFFS / 512) +#ifdef CONFIG_SPL_BUILD +#define CONFIG_FIXED_SDHCI_ALIGNED_BUFFER 0x00180000 /* in SDRAM */ +#endif +#endif + +/* + * Environment Configuration + */ +#define CONFIG_ENV_OVERWRITE + +#define CONFIG_BAUDRATE 115200 + +#define CONFIG_HOSTNAME ccdc +#define CONFIG_ROOTPATH "/opt/nfsroot" +#define CONFIG_BOOTFILE "ccdc.img" + +#define CONFIG_PREBOOT /* enable preboot variable */ + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth1\0" \ + "consoledev=ttyS1\0" \ + "u-boot=u-boot.bin\0" \ + "bootfile_addr=1000000\0" \ + "keyprogram_addr=3000000\0" \ + "keyprogram_file=keyprogram.img\0" \ + "fdtfile=controlcenterdc.dtb\0" \ + "load=tftpboot ${loadaddr} ${u-boot}\0" \ + "mmcdev=0:2\0" \ + "update=sf probe 1:0;" \ + " sf erase 0 +${filesize};" \ + " sf write ${fileaddr} 0 ${filesize}\0" \ + "upd=run load update\0" \ + "fdt_high=0x10000000\0" \ + "initrd_high=0x10000000\0" \ + "loadkeyprogram=tpm flush_keys;" \ + " mmc rescan;" \ + " ext4load mmc ${mmcdev} ${keyprogram_addr} ${keyprogram_file};"\ + " source ${keyprogram_addr}:script@1\0" \ + "gpio1=gpio@22_25\0" \ + "gpio2=A29\0" \ + "blinkseq='0 0 0 0 2 0 2 2 3 1 3 1 0 0 2 2 3 1 3 3 2 0 2 2 3 1 1 1 " \ + "2 0 2 2 3 1 3 1 0 0 2 0 3 3 3 1 2 0 0 0 3 1 1 1 0 0 0 0'\0" \ + "bootfail=for i in ${blinkseq}; do" \ + " if test $i -eq 0; then" \ + " gpio clear ${gpio1}; gpio set ${gpio2};" \ + " elif test $i -eq 1; then" \ + " gpio clear ${gpio1}; gpio clear ${gpio2};" \ + " elif test $i -eq 2; then" \ + " gpio set ${gpio1}; gpio set ${gpio2};" \ + " else;" \ + " gpio clear ${gpio1}; gpio set ${gpio2};" \ + " fi; sleep 0.12; done\0" + +#define CONFIG_NFSBOOTCOMMAND \ + "setenv bootargs root=/dev/nfs rw " \ + "nfsroot=${serverip}:${rootpath} " \ + "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}:${netdev}:off " \ + "console=${consoledev},${baudrate} ${othbootargs}; " \ + "tftpboot ${bootfile_addr} ${bootfile}; " \ + "bootm ${bootfile_addr}" + +#define CONFIG_MMCBOOTCOMMAND \ + "setenv bootargs root=/dev/mmcblk0p3 rw rootwait " \ + "console=${consoledev},${baudrate} ${othbootargs}; " \ + "ext2load mmc 0:2 ${bootfile_addr} ${bootfile}; " \ + "bootm ${bootfile_addr}" + +#define CONFIG_BOOTCOMMAND \ + "if env exists keyprogram; then;" \ + " setenv keyprogram; run nfsboot;" \ + " fi;" \ + " run dobootfail" + +/* + * mv-common.h should be defined after CMD configs since it used them + * to enable certain macros + */ +#include "mv-common.h" + +#endif /* _CONFIG_CONTROLCENTERDC_H */ |