diff options
Diffstat (limited to 'include/configs/dnp1110.h')
| -rw-r--r-- | include/configs/dnp1110.h | 162 |
1 files changed, 0 insertions, 162 deletions
diff --git a/include/configs/dnp1110.h b/include/configs/dnp1110.h deleted file mode 100644 index 7d79d57faa..0000000000 --- a/include/configs/dnp1110.h +++ /dev/null @@ -1,162 +0,0 @@ -/* - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Rolf Offermanns <rof@sysgo.de> - * - * Configuation settings for the SSV DNP1110 board. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * If we are developing, we might want to start armboot from ram - * so we MUST NOT initialize critical regs like mem-timing ... - */ -#define CONFIG_SKIP_LOWLEVEL_INIT 1 - -/* - * High Level Configuration Options - * (easy to change) - */ -#define CONFIG_SA1110 1 /* This is an SA1110 CPU */ -#define CONFIG_DNP1110 1 /* on an DNP/1110 Board */ - -#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ -/* we will never enable dcache, because we have to setup MMU first */ -#define CONFIG_SYS_DCACHE_OFF - -/* - * Size of malloc() pool - */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) - -/* - * Hardware drivers - */ -#define CONFIG_NET_MULTI -#define CONFIG_SMC91111 -#define CONFIG_SMC91111_BASE 0x20000300 - - -/* - * select serial console configuration - */ -#define CONFIG_SA1100_SERIAL -#define CONFIG_SERIAL1 1 /* we use SERIAL 1 */ - -/* allow to overwrite serial and ethaddr */ -#define CONFIG_ENV_OVERWRITE - -#define CONFIG_BAUDRATE 115200 - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - - -#define CONFIG_BOOTDELAY 3 -#define CONFIG_BOOTARGS "root=ramfs devfs=mount console=ttySA0,115200" -#define CONFIG_ETHADDR 02:80:ad:20:31:b8 -#define CONFIG_NETMASK 255.255.0.0 -#define CONFIG_IPADDR 172.22.2.23 -#define CONFIG_SERVERIP 172.22.2.22 -#define CONFIG_BOOTFILE "dnp1110" -#define CONFIG_BOOTCOMMAND "tftp; bootm" - -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ -#endif - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "DNP1110 # " /* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0xc0400000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0xc0800000 /* 4 ... 8 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0xc0200000 /* default load address */ - -#define CONFIG_SYS_HZ 3686400 /* incrementer freq: 3.6864 MHz */ -#define CONFIG_SYS_CPUSPEED 0x0b /* set core clock to 220 MHz */ - - /* valid baudrates */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - -/*----------------------------------------------------------------------- - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128*1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif - -/*----------------------------------------------------------------------- - * Physical Memory Map - */ -#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 banks of DRAM */ -#define PHYS_SDRAM_1 0xc0000000 /* SDRAM Bank #1 */ -#define PHYS_SDRAM_1_SIZE 0x02000000 /* 32 MB */ - - -#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ -#define PHYS_FLASH_SIZE 0x01000000 /* 16 MB */ -#define PHYS_FLASH_BANK_SIZE 0x01000000 /* 32 MB Banks */ -#define PHYS_FLASH_SECT_SIZE 0x00020000 /* 256 KB sectors (x2) */ - -#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 - -/*----------------------------------------------------------------------- - * FLASH and environment organization - */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max number of sectors on one chip */ - -/* timeout values are in ticks */ -#define CONFIG_SYS_FLASH_ERASE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Erase */ -#define CONFIG_SYS_FLASH_WRITE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Write */ - -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 0xF80000) /* Addr of Environment Sector */ -#define CONFIG_ENV_SIZE 0x20000 /* Total Size of Environment Sector */ - -#endif /* __CONFIG_H */ |