diff options
Diffstat (limited to 'include/configs/kp_imx6q_tpc.h')
| -rw-r--r-- | include/configs/kp_imx6q_tpc.h | 52 |
1 files changed, 30 insertions, 22 deletions
diff --git a/include/configs/kp_imx6q_tpc.h b/include/configs/kp_imx6q_tpc.h index c160ad5bf6..f6746a93ca 100644 --- a/include/configs/kp_imx6q_tpc.h +++ b/include/configs/kp_imx6q_tpc.h @@ -25,30 +25,10 @@ #define CONFIG_SYS_MALLOC_LEN (4 * SZ_1M) /* FEC ethernet */ -#define IMX_FEC_BASE ENET_BASE_ADDR -#define CONFIG_FEC_XCV_TYPE RGMII -#define CONFIG_ETHPRIME "FEC" -#define CONFIG_FEC_MXC_PHYADDR 0 #define CONFIG_ARP_TIMEOUT 200UL -/* I2C Configs */ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_MXC -#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ -#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ -#define CONFIG_SYS_I2C_SPEED 100000 - -/* MMC Configs */ -#define CONFIG_SYS_FSL_ESDHC_ADDR 0 -#define CONFIG_SYS_FSL_USDHC_NUM 2 #define CONFIG_SYS_MMC_ENV_DEV 1 /* 0 = SDHC2, 1 = SDHC4 (eMMC) */ -/* UART */ -#define CONFIG_MXC_UART -#define CONFIG_MXC_UART_BASE UART1_BASE -#define CONFIG_CONS_INDEX 1 -#define CONFIG_BAUDRATE 115200 - /* USB Configs */ #ifdef CONFIG_CMD_USB #define CONFIG_EHCI_HCD_INIT_AFTER_RESET @@ -81,14 +61,42 @@ "rdinit=/sbin/init\0" \ "addinitrd=setenv bootargs ${bootargs} rdinit=${rdinit} ${debug} \0" \ "fit_config=mx6q_tpc70_conf\0" \ + "uboot_file=u-boot.img\0" \ + "SPL_file=SPL\0" \ + "wic_file=kp-image-kpimx6qtpc.wic\0" \ "upd_image=st.4k\0" \ - "updargs=setenv bootargs console=${console} ${smp}"\ - "rdinit=${rdinit} ${debug} ${displayargs}\0" \ + "updargs=setenv bootargs console=${console} ${smp} ${displayargs}\0" \ + "initrd_ram_dev=/dev/ram\0" \ + "addswupdate=setenv bootargs ${bootargs} root=${initrd_ram_dev} rw\0" \ "loadusb=usb start; " \ "fatload usb 0 ${loadaddr} ${upd_image}\0" \ + "upd_uboot_sd=" \ + "if tftp ${loadaddr} ${uboot_file}; then " \ + "setexpr blkc ${filesize} / 0x200;" \ + "setexpr blkc ${blkc} + 1;" \ + "mmc write ${loadaddr} 0x8A ${blkc};" \ + "fi;\0" \ + "upd_SPL_sd=" \ + "if tftp ${loadaddr} ${SPL_file}; then " \ + "setexpr blkc ${filesize} / 0x200;" \ + "setexpr blkc ${blkc} + 1;" \ + "mmc write ${loadaddr} 0x2 ${blkc};" \ + "fi;\0" \ + "upd_SPL_mmc=mmc dev 1; mmc partconf 1 0 1 1; run upd_SPL_sd\0" \ + "upd_uboot_mmc=mmc dev 1; mmc partconf 1 0 1 1; run upd_uboot_sd\0" \ + "up_mmc=run upd_SPL_mmc; run upd_uboot_mmc\0" \ + "up_sd=run upd_SPL_sd; run upd_uboot_sd\0" \ + "upd_wic=" \ + "if tftp ${loadaddr} ${wic_file}; then " \ + "setexpr blkc ${filesize} / 0x200;" \ + "setexpr blkc ${blkc} + 1;" \ + "mmc write ${loadaddr} 0x0 ${blkc};" \ + "fi;\0" \ "usbupd=echo Booting update from usb ...; " \ "setenv bootargs; " \ "run updargs; " \ + "run addinitrd; " \ + "run addswupdate; " \ "run loadusb; " \ "bootm ${loadaddr}#${fit_config}\0" \ BOOTENV |