diff options
Diffstat (limited to 'include/configs/legoev3.h')
| -rw-r--r-- | include/configs/legoev3.h | 104 |
1 files changed, 37 insertions, 67 deletions
diff --git a/include/configs/legoev3.h b/include/configs/legoev3.h index 542b8f072c..7a0511f88e 100644 --- a/include/configs/legoev3.h +++ b/include/configs/legoev3.h @@ -39,61 +39,6 @@ #define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ -#define CONFIG_SYS_DA850_SYSCFG_SUSPSRC ( \ - DAVINCI_SYSCFG_SUSPSRC_TIMER0 | \ - DAVINCI_SYSCFG_SUSPSRC_SPI0 | \ - DAVINCI_SYSCFG_SUSPSRC_UART1 | \ - DAVINCI_SYSCFG_SUSPSRC_EMAC | \ - DAVINCI_SYSCFG_SUSPSRC_I2C) - -/* - * PLL configuration - */ - -#define CONFIG_SYS_DA850_PLL0_PLLM 24 -#define CONFIG_SYS_DA850_PLL1_PLLM 21 - -/* - * DDR2 memory configuration - */ -#define CONFIG_SYS_DA850_DDR2_DDRPHYCR (DV_DDR_PHY_PWRDNEN | \ - DV_DDR_PHY_EXT_STRBEN | \ - (0x4 << DV_DDR_PHY_RD_LATENCY_SHIFT)) - -#define CONFIG_SYS_DA850_DDR2_SDBCR ( \ - (1 << DV_DDR_SDCR_MSDRAMEN_SHIFT) | \ - (1 << DV_DDR_SDCR_DDREN_SHIFT) | \ - (1 << DV_DDR_SDCR_SDRAMEN_SHIFT) | \ - (1 << DV_DDR_SDCR_BUS_WIDTH_SHIFT) | \ - (0x3 << DV_DDR_SDCR_CL_SHIFT) | \ - (0x2 << DV_DDR_SDCR_IBANK_SHIFT) | \ - (0x2 << DV_DDR_SDCR_PAGESIZE_SHIFT)) - -/* SDBCR2 is only used if IBANK_POS bit in SDBCR is set */ -#define CONFIG_SYS_DA850_DDR2_SDBCR2 0 - -#define CONFIG_SYS_DA850_DDR2_SDTIMR ( \ - (14 << DV_DDR_SDTMR1_RFC_SHIFT) | \ - (2 << DV_DDR_SDTMR1_RP_SHIFT) | \ - (2 << DV_DDR_SDTMR1_RCD_SHIFT) | \ - (1 << DV_DDR_SDTMR1_WR_SHIFT) | \ - (5 << DV_DDR_SDTMR1_RAS_SHIFT) | \ - (8 << DV_DDR_SDTMR1_RC_SHIFT) | \ - (1 << DV_DDR_SDTMR1_RRD_SHIFT) | \ - (0 << DV_DDR_SDTMR1_WTR_SHIFT)) - -#define CONFIG_SYS_DA850_DDR2_SDTIMR2 ( \ - (7 << DV_DDR_SDTMR2_RASMAX_SHIFT) | \ - (0 << DV_DDR_SDTMR2_XP_SHIFT) | \ - (0 << DV_DDR_SDTMR2_ODT_SHIFT) | \ - (17 << DV_DDR_SDTMR2_XSNR_SHIFT) | \ - (199 << DV_DDR_SDTMR2_XSRD_SHIFT) | \ - (0 << DV_DDR_SDTMR2_RTP_SHIFT) | \ - (0 << DV_DDR_SDTMR2_CKE_SHIFT)) - -#define CONFIG_SYS_DA850_DDR2_SDRCR 0x00000494 -#define CONFIG_SYS_DA850_DDR2_PBBPR 0x30 - /* * Serial Driver info */ @@ -139,35 +84,60 @@ "if run loadbootscr; then " \ "run bootscript; " \ "else " \ + "if run loadbootenv; then " \ + "echo Loaded env from ${bootenvfile};" \ + "run importbootenv;" \ + "fi;" \ + "if test -n $uenvcmd; then " \ + "echo Running uenvcmd...;" \ + "run uenvcmd;" \ + "fi;" \ "if run loadimage; then " \ "run mmcargs; " \ + "if run loadfdt; then " \ + "echo Using ${fdtfile}...;" \ + "run fdtfixup; " \ + "run fdtboot; "\ + "fi; " \ "run mmcboot; " \ - "else " \ - "run flashargs; " \ - "run flashboot; " \ "fi; " \ "fi; " \ - "else " \ - "run flashargs; " \ - "run flashboot; " \ - "fi" + "fi; "\ + "run flashargs; " \ + "run flashboot" #define CONFIG_EXTRA_ENV_SETTINGS \ - "hostname=EV3\0" \ + "bootenvfile=uEnv.txt\0" \ + "fdtfile=da850-lego-ev3.dtb\0" \ "memsize=64M\0" \ "filesyssize=10M\0" \ "verify=n\0" \ "console=ttyS1,115200n8\0" \ "bootscraddr=0xC0600000\0" \ + "fdtaddr=0xC0600000\0" \ "loadaddr=0xC0007FC0\0" \ "filesysaddr=0xC1180000\0" \ "fwupdateboot=mw 0xFFFF1FFC 0x5555AAAA; reset\0" \ - "mmcargs=setenv bootargs mem=${memsize} console=${console} root=/dev/mmcblk0p2 rw rootwait lpj=747520\0" \ + "importbootenv=echo Importing environment...; " \ + "env import -t ${loadaddr} ${filesize}\0" \ + "loadbootenv=fatload mmc 0 ${loadaddr} ${bootenvfile}\0" \ + "mmcargs=setenv bootargs console=${console} root=/dev/mmcblk0p2 rw " \ + "rootwait ${optargs}\0" \ "mmcboot=bootm ${loadaddr}\0" \ - "flashargs=setenv bootargs mem=${memsize} initrd=${filesysaddr},${filesyssize} root=/dev/ram0 rw rootfstype=squashfs console=${console} lpj=747520\0" \ - "flashboot=sf probe 0; sf read ${loadaddr} 0x50000 0x300000; sf read ${filesysaddr} 0x350000 0x960000; bootm ${loadaddr}\0" \ + "flashargs=setenv bootargs initrd=${filesysaddr},${filesyssize} " \ + "root=/dev/ram0 rw rootfstype=squashfs console=${console} " \ + "${optargs}\0" \ + "flashboot=sf probe 0; " \ + "sf read ${fdtaddr} 0x40000 0x10000; " \ + "sf read ${loadaddr} 0x50000 0x400000; " \ + "sf read ${filesysaddr} 0x450000 0xA00000; " \ + "run fdtfixup; " \ + "run fdtboot\0" \ "loadimage=fatload mmc 0 ${loadaddr} uImage\0" \ + "loadfdt=fatload mmc 0 ${fdtaddr} ${fdtfile}\0" \ + "fdtfixup=fdt addr ${fdtaddr}; fdt resize; fdt chosen\0" \ + "fdtboot=bootm ${loadaddr} - ${fdtaddr}\0" \ "loadbootscr=fatload mmc 0 ${bootscraddr} boot.scr\0" \ - "bootscript=source ${bootscraddr}\0" \ + "bootscript=source ${bootscraddr}\0" #ifdef CONFIG_CMD_BDI #define CONFIG_CLOCKS |