diff options
Diffstat (limited to 'include/configs/mcc200.h')
| -rw-r--r-- | include/configs/mcc200.h | 75 |
1 files changed, 48 insertions, 27 deletions
diff --git a/include/configs/mcc200.h b/include/configs/mcc200.h index df3d68e9f7..0c935bfcea 100644 --- a/include/configs/mcc200.h +++ b/include/configs/mcc200.h @@ -37,12 +37,12 @@ #define CONFIG_MISC_INIT_R -#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02 /* Software reboot */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ -#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ +#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ #if (CONFIG_COMMANDS & CFG_CMD_KGDB) -# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif /* @@ -72,12 +72,15 @@ */ #if !defined(CONFIG_PRS200) /* MCC200 configuration: */ -#undef CONFIG_PSC_CONSOLE +#define CONFIG_SERIAL_MULTI 1 +#define CONFIG_PSC_CONSOLE 1 /* PSC1 may be COM */ +#define CONFIG_PSC_CONSOLE2 2 /* PSC2 is PSoC */ #else /* PRS200 configuration: */ #define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */ #endif -#if defined(CONFIG_QUART_CONSOLE) && defined(CONFIG_PSC_CONSOLE) +#if defined(CONFIG_QUART_CONSOLE) && defined(CONFIG_PSC_CONSOLE) && \ + !defined(CONFIG_SERIAL_MULTI) #error "Select only one console device!" #endif #define CONFIG_BAUDRATE 115200 @@ -89,7 +92,7 @@ /* USB */ #define CONFIG_USB_OHCI -#define ADD_USB_CMD CFG_CMD_USB | CFG_CMD_FAT +#define ADD_USB_CMD CFG_CMD_USB | CFG_CMD_FAT #define CONFIG_USB_STORAGE /* @@ -115,15 +118,15 @@ #undef CONFIG_BOOTARGS -#define XMK_STR(x) #x -#define MK_STR(x) XMK_STR(x) +#define XMK_STR(x) #x +#define MK_STR(x) XMK_STR(x) #ifdef CONFIG_PRS200 -# define CFG__BOARDNAME "prs200" -# define LINUX_CONSOLE "ttyS0" +# define CFG__BOARDNAME "prs200" +# define CFG__LINUX_CONSOLE "ttyS0" #else -# define CFG__BOARDNAME "mcc200" -# define LINUX_CONSOLE "ttyEU7" +# define CFG__BOARDNAME "mcc200" +# define CFG__LINUX_CONSOLE "ttyEU7" #endif #define CONFIG_EXTRA_ENV_SETTINGS \ @@ -143,7 +146,7 @@ "bootm ${kernel_addr} ${ramdisk_addr}\0" \ "net_nfs=tftp 200000 ${bootfile};" \ "run nfsargs addip addcons;bootm\0" \ - "console=" MK_STR(LINUX_CONSOLE) "\0" \ + "console=" CFG__LINUX_CONSOLE "\0" \ "rootpath=/opt/eldk/ppc_6xx\0" \ "bootfile=/tftpboot/" CFG__BOARDNAME "/uImage\0" \ "load=tftp 200000 /tftpboot/" CFG__BOARDNAME "/u-boot.bin\0" \ @@ -164,7 +167,7 @@ /* * IPB Bus clocking configuration. */ -#define CFG_IPBSPEED_133 /* define for 133MHz speed */ +#define CFG_IPBSPEED_133 /* define for 133MHz speed */ /* * I2C configuration @@ -180,9 +183,9 @@ * TEXT base always at 0xFFF00000 * ENV_ADDR always at 0xFFF40000 * FLASH_BASE at 0xFC000000 for 64 MB (only 32MB are supported, not enough addr lines!!!) - * 0xFE000000 for 32 MB - * 0xFF000000 for 16 MB - * 0xFF800000 for 8 MB + * 0xFE000000 for 32 MB + * 0xFF000000 for 16 MB + * 0xFF800000 for 8 MB */ #define CFG_FLASH_BASE 0xfc000000 #define CFG_FLASH_SIZE 0x04000000 @@ -204,9 +207,9 @@ #define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ #define CFG_FLASH_QUIET_TEST 1 /* don't warn upon unknown flash */ -#define CFG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */ +#define CFG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */ -#define CFG_ENV_SECT_SIZE 0x40000 /* size of one complete sector */ +#define CFG_ENV_SECT_SIZE 0x40000 /* size of one complete sector */ #define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN) #define CFG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */ @@ -236,7 +239,7 @@ #define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) #define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET -#define CFG_MONITOR_BASE TEXT_BASE +#define CFG_MONITOR_BASE TEXT_BASE #if (CFG_MONITOR_BASE < CFG_FLASH_BASE) # define CFG_RAMBOOT 1 #endif @@ -256,27 +259,45 @@ #define CONFIG_PHY_ADDR 1 /* + * LCD Splash Screen + */ +#if !defined(CONFIG_PRS200) +#define CONFIG_LCD 1 +#endif + +#if defined(CONFIG_LCD) +#define CONFIG_SPLASH_SCREEN 1 +#define CFG_CONSOLE_IS_IN_ENV 1 +#define LCD_BPP LCD_MONOCHROME +#endif + +/* * GPIO configuration */ /* 0x10000004 = 32MB SDRAM */ /* 0x90000004 = 64MB SDRAM */ +#if defined(CONFIG_LCD) +/* set PSC2 in UART mode */ +#define CFG_GPS_PORT_CONFIG 0x00000044 +#else #define CFG_GPS_PORT_CONFIG 0x00000004 +#endif /* * Miscellaneous configurable options */ -#define CFG_LONGHELP /* undef to save memory */ -#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ #if (CONFIG_COMMANDS & CFG_CMD_KGDB) -#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else -#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ #endif -#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ #define CFG_MAXARGS 16 /* max number of command args */ #define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ -#define CFG_MEMTEST_START 0x00100000 /* memtest works on */ +#define CFG_MEMTEST_START 0x00100000 /* memtest works on */ #define CFG_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */ #define CFG_LOAD_ADDR 0x100000 /* default load address */ |