diff options
Diffstat (limited to 'include/configs/mimc200.h')
| -rw-r--r-- | include/configs/mimc200.h | 63 |
1 files changed, 33 insertions, 30 deletions
diff --git a/include/configs/mimc200.h b/include/configs/mimc200.h index 16e2ec62ee..6c5276920d 100644 --- a/include/configs/mimc200.h +++ b/include/configs/mimc200.h @@ -24,14 +24,14 @@ #ifndef __CONFIG_H #define __CONFIG_H -#include <asm/arch/memory-map.h> +#include <asm/arch/hardware.h> -#define CONFIG_AVR32 1 -#define CONFIG_AT32AP 1 -#define CONFIG_AT32AP7000 1 -#define CONFIG_MIMC200 1 +#define CONFIG_AVR32 +#define CONFIG_AT32AP +#define CONFIG_AT32AP7000 +#define CONFIG_MIMC200 -#define CONFIG_MIMC200_EXT_FLASH 1 +#define CONFIG_MIMC200_EXT_FLASH #define CONFIG_SYS_HZ 1000 @@ -40,8 +40,8 @@ * frequency, the HSB and PBB busses to run at 1/2 the PLL frequency * and the PBA bus to run at 1/4 the PLL frequency. */ -#define CONFIG_PLL 1 -#define CONFIG_SYS_POWER_MANAGER 1 +#define CONFIG_PLL +#define CONFIG_SYS_POWER_MANAGER #define CONFIG_SYS_OSC0_HZ 10000000 #define CONFIG_SYS_PLL0_DIV 1 #define CONFIG_SYS_PLL0_MUL 15 @@ -63,15 +63,17 @@ */ #define CONFIG_SYS_PLL0_OPT 0x04 -#define CONFIG_USART1 1 +#define CONFIG_USART_BASE ATMEL_BASE_USART1 +#define CONFIG_USART_ID 1 + #define CONFIG_MIMC200_DBGLINK 1 /* User serviceable stuff */ -#define CONFIG_DOS_PARTITION 1 +#define CONFIG_DOS_PARTITION -#define CONFIG_CMDLINE_TAG 1 -#define CONFIG_SETUP_MEMORY_TAGS 1 -#define CONFIG_INITRD_TAG 1 +#define CONFIG_CMDLINE_TAG +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_INITRD_TAG #define CONFIG_STACKSIZE (2048) @@ -81,9 +83,9 @@ #define CONFIG_BOOTCOMMAND \ "fsload boot/uImage; bootm" -#define CONFIG_SILENT_CONSOLE 1 /* enable silent startup */ -#define CONFIG_DISABLE_CONSOLE 1 /* disable console */ -#define CONFIG_SYS_DEVICE_NULLDEV 1 /* include nulldev device */ +#define CONFIG_SILENT_CONSOLE /* enable silent startup */ +#define CONFIG_DISABLE_CONSOLE /* disable console */ +#define CONFIG_SYS_DEVICE_NULLDEV /* include nulldev device */ #define CONFIG_LCD 1 @@ -92,16 +94,16 @@ * data on the serial line may interrupt the boot sequence. */ #define CONFIG_BOOTDELAY 0 -#define CONFIG_ZERO_BOOTDELAY_CHECK 1 -#define CONFIG_AUTOBOOT 1 +#define CONFIG_ZERO_BOOTDELAY_CHECK +#define CONFIG_AUTOBOOT /* * After booting the board for the first time, new ethernet addresses * should be generated and assigned to the environment variables * "ethaddr" and "eth1addr". This is normally done during production. */ -#define CONFIG_OVERWRITE_ETHADDR_ONCE 1 -#define CONFIG_NET_MULTI 1 +#define CONFIG_OVERWRITE_ETHADDR_ONCE +#define CONFIG_NET_MULTI /* * BOOTP/DHCP options @@ -122,13 +124,13 @@ #define CONFIG_CMD_MMC #define CONFIG_CMD_NET -#define CONFIG_ATMEL_USART 1 -#define CONFIG_MACB 1 -#define CONFIG_PORTMUX_PIO 1 +#define CONFIG_ATMEL_USART +#define CONFIG_MACB +#define CONFIG_PORTMUX_PIO #define CONFIG_SYS_NR_PIOS 5 -#define CONFIG_SYS_HSDRAMC 1 -#define CONFIG_MMC 1 -#define CONFIG_ATMEL_MCI 1 +#define CONFIG_SYS_HSDRAMC +#define CONFIG_MMC +#define CONFIG_ATMEL_MCI #if defined(CONFIG_LCD) #define CONFIG_CMD_BMP @@ -149,8 +151,8 @@ #define CONFIG_NR_DRAM_BANKS 1 -#define CONFIG_SYS_FLASH_CFI 1 -#define CONFIG_FLASH_CFI_DRIVER 1 +#define CONFIG_SYS_FLASH_CFI +#define CONFIG_FLASH_CFI_DRIVER #define CONFIG_SYS_FLASH_BASE 0x00000000 #define CONFIG_SYS_FLASH_SIZE 0x800000 @@ -158,6 +160,7 @@ #define CONFIG_SYS_MAX_FLASH_SECT 135 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE +#define CONFIG_SYS_TEXT_BASE 0x00000000 #define CONFIG_SYS_INTRAM_BASE INTERNAL_SRAM_BASE #define CONFIG_SYS_INTRAM_SIZE INTERNAL_SRAM_SIZE @@ -166,7 +169,7 @@ #define CONFIG_SYS_FRAM_BASE 0x08000000 #define CONFIG_SYS_FRAM_SIZE 0x20000 -#define CONFIG_ENV_IS_IN_FLASH 1 +#define CONFIG_ENV_IS_IN_FLASH #define CONFIG_ENV_SIZE 65536 #define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_FLASH_SIZE - CONFIG_ENV_SIZE) @@ -184,7 +187,7 @@ #define CONFIG_SYS_CBSIZE 256 #define CONFIG_SYS_MAXARGS 16 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_LONGHELP 1 +#define CONFIG_SYS_LONGHELP #define CONFIG_SYS_MEMTEST_START EBI_SDRAM_BASE #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x1f00000) |