diff options
Diffstat (limited to 'include/configs/ml401.h')
| -rw-r--r-- | include/configs/ml401.h | 50 |
1 files changed, 24 insertions, 26 deletions
diff --git a/include/configs/ml401.h b/include/configs/ml401.h index 7eeae708a7..74fe88867e 100644 --- a/include/configs/ml401.h +++ b/include/configs/ml401.h @@ -1,7 +1,7 @@ /* * (C) Copyright 2007 Czech Technical University. * - * Michal SIMEK <monstr@seznam.cz> + * Michal SIMEK <monstr@monstr.eu> * * See file CREDITS for list of people who contributed to this * project. @@ -32,6 +32,7 @@ #define CONFIG_ML401 1 /* ML401 Board */ /* uart */ +#define XILINX_UARTLITE #define CONFIG_SERIAL_BASE XILINX_UART_BASEADDR #define CONFIG_BAUDRATE XILINX_UART_BAUDRATE #define CFG_BAUDRATE_TABLE { CONFIG_BAUDRATE } @@ -86,7 +87,7 @@ * 0x11FB_F000 CFG_MONITOR_BASE * MONITOR_CODE 256kB Env * 0x13FF_F000 CFG_GBL_DATA_OFFSET - * GLOBAL_DATA 4kB bd, gd + * GLOBAL_DATA 4kB bd, gd * 0x1400_0000 CFG_SDRAM_BASE + CFG_SDRAM_SIZE */ @@ -99,7 +100,7 @@ /* global pointer */ #define CFG_GBL_DATA_SIZE 0x1000 /* size of global data */ /* start of global data */ -#define CFG_GBL_DATA_OFFSET (CFG_SDRAM_BASE + CFG_SDRAM_SIZE - CFG_GBL_DATA_SIZE) +#define CFG_GBL_DATA_OFFSET (CFG_SDRAM_BASE + CFG_SDRAM_SIZE - CFG_GBL_DATA_SIZE) /* monitor code */ #define SIZE 0x40000 @@ -145,6 +146,16 @@ #define CFG_FLASH_PROTECTION /* hardware flash protection */ #endif /* !FLASH */ +/* system ace */ +#ifdef XILINX_SYSACE_BASEADDR + #define CONFIG_SYSTEMACE + /* #define DEBUG_SYSTEMACE */ + #define SYSTEMACE_CONFIG_FPGA + #define CFG_SYSTEMACE_BASE XILINX_SYSACE_BASEADDR + #define CFG_SYSTEMACE_WIDTH XILINX_SYSACE_MEM_WIDTH + #define CONFIG_DOS_PARTITION +#endif + /* * BOOTP options */ @@ -153,28 +164,21 @@ #define CONFIG_BOOTP_GATEWAY #define CONFIG_BOOTP_HOSTNAME - /* * Command line configuration. */ #include <config_cmd_default.h> #define CONFIG_CMD_ASKENV -#define CONFIG_CMD_AUTOSCRIPT -#define CONFIG_CMD_BDI #define CONFIG_CMD_CACHE -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT -#define CONFIG_CMD_IMI #define CONFIG_CMD_IRQ -#define CONFIG_CMD_LOADB -#define CONFIG_CMD_LOADS -#define CONFIG_CMD_MEMORY -#define CONFIG_CMD_MISC #define CONFIG_CMD_MFSL -#define CONFIG_CMD_NET #define CONFIG_CMD_PING -#define CONFIG_CMD_RUN + +#if defined(CONFIG_SYSTEMACE) + #define CONFIG_CMD_EXT2 + #define CONFIG_CMD_FAT +#endif #if defined(FLASH) #define CONFIG_CMD_ECHO @@ -186,6 +190,8 @@ #define CONFIG_CMD_ENV #define CONFIG_CMD_SAVES #endif +#else + #undef CONFIG_CMD_FLASH #endif #if defined(CONFIG_CMD_JFFS2) @@ -210,24 +216,16 @@ #define CONFIG_BOOTDELAY 30 #define CONFIG_BOOTARGS "root=romfs" #define CONFIG_HOSTNAME "ml401" -#define CONFIG_BOOTCOMMAND "base 0;tftp 11000000 image.img;bootm" +#define CONFIG_BOOTCOMMAND "base 0;tftp 11000000 image.img;bootm" #define CONFIG_IPADDR 192.168.0.3 -#define CONFIG_SERVERIP 192.168.0.5 -#define CONFIG_GATEWAYIP 192.168.0.1 +#define CONFIG_SERVERIP 192.168.0.5 +#define CONFIG_GATEWAYIP 192.168.0.1 #define CONFIG_ETHADDR 00:E0:0C:00:00:FD /* architecture dependent code */ #define CFG_USR_EXCEP /* user exception */ #define CFG_HZ 1000 -/* system ace */ -#define CONFIG_SYSTEMACE -/* #define DEBUG_SYSTEMACE */ -#define SYSTEMACE_CONFIG_FPGA -#define CFG_SYSTEMACE_BASE XILINX_SYSACE_BASEADDR -#define CFG_SYSTEMACE_WIDTH XILINX_SYSACE_MEM_WIDTH -#define CONFIG_DOS_PARTITION - #define CONFIG_PREBOOT "echo U-BOOT for ML401;setenv preboot;echo" #define CONFIG_EXTRA_ENV_SETTINGS "unlock=yes\0" /* hardware flash protection */\ |