diff options
Diffstat (limited to 'include/configs/mx53ppd.h')
| -rw-r--r-- | include/configs/mx53ppd.h | 76 |
1 files changed, 12 insertions, 64 deletions
diff --git a/include/configs/mx53ppd.h b/include/configs/mx53ppd.h index 9361507a55..196eab05c2 100644 --- a/include/configs/mx53ppd.h +++ b/include/configs/mx53ppd.h @@ -11,8 +11,6 @@ #include <asm/arch/imx-regs.h> -#define CONSOLE_DEV "ttymxc0" - #define CONFIG_CMDLINE_TAG #define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_INITRD_TAG @@ -25,15 +23,6 @@ #define CONFIG_BOARD_LATE_INIT #define CONFIG_REVISION_TAG -#define CONFIG_MXC_UART -#define CONFIG_MXC_UART_BASE UART1_BASE - -/* Eth Configs */ - -#define CONFIG_FEC_MXC -#define IMX_FEC_BASE FEC_BASE_ADDR -#define CONFIG_FEC_MXC_PHYADDR 0x1F - /* USB Configs */ #define CONFIG_USB_HOST_ETHER #define CONFIG_USB_ETHER_ASIX @@ -43,33 +32,12 @@ #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) #define CONFIG_MXC_USB_FLAGS 0 -#define CONFIG_SYS_RTC_BUS_NUM 2 -#define CONFIG_SYS_I2C_RTC_ADDR 0x30 - -/* I2C Configs */ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_MXC -#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ -#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ -#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */ - -/* PMIC Controller */ -#define CONFIG_POWER -#define CONFIG_POWER_I2C -#define CONFIG_DIALOG_POWER -#define CONFIG_POWER_FSL -#define CONFIG_POWER_FSL_MC13892 -#define CONFIG_SYS_DIALOG_PMIC_I2C_ADDR 0x48 -#define CONFIG_SYS_FSL_PMIC_I2C_ADDR 0x8 - /* allow to overwrite serial and ethaddr */ #define CONFIG_ENV_OVERWRITE #define CONFIG_BAUDRATE 115200 /* Command definition */ -#define CONFIG_ETHPRIME "FEC0" - #define CONFIG_LOADADDR 0x72000000 /* loadaddr env var */ #define PPD_CONFIG_NFS \ @@ -92,34 +60,26 @@ #define CONFIG_EXTRA_ENV_SETTINGS \ PPD_CONFIG_NFS \ "image=/boot/fitImage\0" \ - "fdt_high=0xffffffff\0" \ "dev=mmc\0" \ "devnum=2\0" \ "rootdev=mmcblk0p\0" \ "quiet=quiet loglevel=0\0" \ - "console=" CONSOLE_DEV "\0" \ "lvds=ldb\0" \ "setargs=setenv bootargs ${lvds} jtag=on mem=2G " \ - "vt.global_cursor_default=0 bootcause=${bootcause} ${quiet} " \ - "console=${console}\0" \ + "vt.global_cursor_default=0 bootcause=${bootcause} ${quiet}\0" \ "bootargs_emmc=setenv bootargs root=/dev/${rootdev}${partnum} ro " \ "rootwait ${bootargs}\0" \ "doquiet=if ext2load ${dev} ${devnum}:5 0x7000A000 /boot/console; " \ "then setenv quiet; fi\0" \ - "hasfirstboot=ext2load ${dev} ${devnum}:${partnum} 0x7000A000 " \ - "/boot/bootcause/firstboot\0" \ + "hasfirstboot=" \ + "test -e ${dev} ${devnum}:${partnum} /boot/bootcause/firstboot\0" \ "swappartitions=setexpr partnum 3 - ${partnum}\0" \ "failbootcmd=" \ - "ppd_lcd_enable; " \ - "msg=\"Monitor failed to start. " \ - "Try again, or contact GE Service for support.\"; " \ - "echo $msg; " \ - "setenv stdout vga; " \ - "echo \"\n\n\n\n \" $msg; " \ - "setenv stdout serial; " \ - "mw.b 0x7000A000 0xbc; " \ - "mw.b 0x7000A001 0x00; " \ - "ext4write ${dev} ${devnum}:5 0x7000A000 /boot/failures 2\0" \ + "cls; " \ + "setcurs 5 4; " \ + "lcdputs \"Monitor failed to start. " \ + "Try again, or contact GE Service for support.\"; " \ + "bootcount reset; \0" \ "altbootcmd=" \ "run doquiet; " \ "setenv partnum 1; run hasfirstboot || setenv partnum 2; " \ @@ -166,6 +126,8 @@ #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR +#define CONFIG_SYS_BOOTMAPSZ (256 << 20) /* 256M */ + /* Physical Memory Map */ #define PHYS_SDRAM_1 CSD0_BASE_ADDR #define PHYS_SDRAM_1_SIZE (gd->bd->bi_dram[0].size) @@ -188,25 +150,11 @@ #define CONFIG_CMD_FUSE #define CONFIG_FSL_IIM -#define CONFIG_SYS_I2C_SPEED 100000 - -/* I2C1 */ -#define CONFIG_SYS_NUM_I2C_BUSES 9 -#define CONFIG_SYS_I2C_MAX_HOPS 1 -#define CONFIG_SYS_I2C_BUSES { {0, {I2C_NULL_HOP} }, \ - {0, {{I2C_MUX_PCA9547, 0x70, 0} } }, \ - {0, {{I2C_MUX_PCA9547, 0x70, 1} } }, \ - {0, {{I2C_MUX_PCA9547, 0x70, 2} } }, \ - {0, {{I2C_MUX_PCA9547, 0x70, 3} } }, \ - {0, {{I2C_MUX_PCA9547, 0x70, 4} } }, \ - {0, {{I2C_MUX_PCA9547, 0x70, 5} } }, \ - {0, {{I2C_MUX_PCA9547, 0x70, 6} } }, \ - {0, {{I2C_MUX_PCA9547, 0x70, 7} } }, \ - } - #define CONFIG_BCH /* Backlight Control */ #define CONFIG_IMX6_PWM_PER_CLK 66666000 +#define CONFIG_IMX_VIDEO_SKIP + #endif /* __CONFIG_H */ |