diff options
Diffstat (limited to 'include/configs/sc520_spunk.h')
| -rw-r--r-- | include/configs/sc520_spunk.h | 92 |
1 files changed, 46 insertions, 46 deletions
diff --git a/include/configs/sc520_spunk.h b/include/configs/sc520_spunk.h index 4e5798c8a6..fbdbeddf66 100644 --- a/include/configs/sc520_spunk.h +++ b/include/configs/sc520_spunk.h @@ -36,22 +36,22 @@ #define CONFIG_X86 1 /* This is a X86 CPU */ #define CONFIG_SC520 1 /* Include support for AMD SC520 */ -#define CFG_SDRAM_PRECHARGE_DELAY 6 /* 6T */ -#define CFG_SDRAM_REFRESH_RATE 78 /* 7.8uS (choices are 7.8, 15.6, 31.2 or 62.5uS) */ -#define CFG_SDRAM_RAS_CAS_DELAY 3 /* 3T */ +#define CONFIG_SYS_SDRAM_PRECHARGE_DELAY 6 /* 6T */ +#define CONFIG_SYS_SDRAM_REFRESH_RATE 78 /* 7.8uS (choices are 7.8, 15.6, 31.2 or 62.5uS) */ +#define CONFIG_SYS_SDRAM_RAS_CAS_DELAY 3 /* 3T */ /* define at most one of these */ -#undef CFG_SDRAM_CAS_LATENCY_2T -#define CFG_SDRAM_CAS_LATENCY_3T +#undef CONFIG_SYS_SDRAM_CAS_LATENCY_2T +#define CONFIG_SYS_SDRAM_CAS_LATENCY_3T -#define CFG_SC520_HIGH_SPEED 0 /* 100 or 133MHz */ -#define CFG_RESET_GENERIC 1 /* use tripple-fault to reset cpu */ -#undef CFG_RESET_SC520 /* use SC520 MMCR's to reset cpu */ -#undef CFG_TIMER_SC520 /* use SC520 swtimers */ -#define CFG_TIMER_GENERIC 1 /* use the i8254 PIT timers */ -#undef CFG_TIMER_TSC /* use the Pentium TSC timers */ +#define CONFIG_SYS_SC520_HIGH_SPEED 0 /* 100 or 133MHz */ +#define CONFIG_SYS_RESET_GENERIC 1 /* use tripple-fault to reset cpu */ +#undef CONFIG_SYS_RESET_SC520 /* use SC520 MMCR's to reset cpu */ +#undef CONFIG_SYS_TIMER_SC520 /* use SC520 swtimers */ +#define CONFIG_SYS_TIMER_GENERIC 1 /* use the i8254 PIT timers */ +#undef CONFIG_SYS_TIMER_TSC /* use the Pentium TSC timers */ -#define CFG_STACK_SIZE 0x8000 /* Size of bootloader stack */ +#define CONFIG_SYS_STACK_SIZE 0x8000 /* Size of bootloader stack */ #define CONFIG_SHOW_BOOT_PROGRESS 1 #define CONFIG_LAST_STAGE_INIT 1 @@ -104,24 +104,24 @@ /* * Miscellaneous configurable options */ -#define CFG_LONGHELP /* undef to save memory */ -#define CFG_PROMPT "boot > " /* Monitor Command Prompt */ -#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ -#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ -#define CFG_MAXARGS 16 /* max number of command args */ -#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_PROMPT "boot > " /* Monitor Command Prompt */ +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CFG_MEMTEST_START 0x00100000 /* memtest works on */ -#define CFG_MEMTEST_END 0x01000000 /* 1 ... 16 MB in DRAM */ +#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */ +#define CONFIG_SYS_MEMTEST_END 0x01000000 /* 1 ... 16 MB in DRAM */ -#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ +#undef CONFIG_SYS_CLKS_IN_HZ /* everything, incl board info, in Hz */ -#define CFG_LOAD_ADDR 0x100000 /* default load address */ +#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ -#define CFG_HZ 1024 /* incrementer freq: 1kHz */ +#define CONFIG_SYS_HZ 1024 /* incrementer freq: 1kHz */ /* valid baudrates */ -#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } /*----------------------------------------------------------------------- @@ -134,12 +134,12 @@ */ -#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CFG_MAX_FLASH_SECT 512 /* max number of sectors on one chip */ +#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CONFIG_SYS_MAX_FLASH_SECT 512 /* max number of sectors on one chip */ /* timeout values are in ticks */ -#define CFG_FLASH_ERASE_TOUT (2*CFG_HZ) /* Timeout for Flash Erase */ -#define CFG_FLASH_WRITE_TOUT (2*CFG_HZ) /* Timeout for Flash Write */ +#define CONFIG_SYS_FLASH_ERASE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Erase */ +#define CONFIG_SYS_FLASH_WRITE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Write */ #define CONFIG_SPI_EEPROM /* SPI EEPROMs such as AT25010 or AT25640 */ @@ -192,31 +192,31 @@ */ #define CONFIG_NET_MULTI /* Multi ethernet cards support */ #define CONFIG_EEPRO100 -#define CFG_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */ +#define CONFIG_SYS_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */ /************************************************************ * IDE/ATA stuff ************************************************************/ -#define CFG_IDE_MAXBUS 2 /* max. 2 IDE busses */ -#define CFG_IDE_MAXDEVICE (CFG_IDE_MAXBUS*2) /* max. 2 drives per IDE bus */ -#define CFG_ATA_BASE_ADDR 0 -#define CFG_ATA_IDE0_OFFSET 0x01f0 /* ide0 offset */ -#define CFG_ATA_IDE1_OFFSET 0xe000 /* ide1 offset */ -#define CFG_ATA_DATA_OFFSET 0 /* data reg offset */ -#define CFG_ATA_REG_OFFSET 0 /* reg offset */ -#define CFG_ATA_ALT_OFFSET 0x200 /* alternate register offset */ +#define CONFIG_SYS_IDE_MAXBUS 2 /* max. 2 IDE busses */ +#define CONFIG_SYS_IDE_MAXDEVICE (CONFIG_SYS_IDE_MAXBUS*2) /* max. 2 drives per IDE bus */ +#define CONFIG_SYS_ATA_BASE_ADDR 0 +#define CONFIG_SYS_ATA_IDE0_OFFSET 0x01f0 /* ide0 offset */ +#define CONFIG_SYS_ATA_IDE1_OFFSET 0xe000 /* ide1 offset */ +#define CONFIG_SYS_ATA_DATA_OFFSET 0 /* data reg offset */ +#define CONFIG_SYS_ATA_REG_OFFSET 0 /* reg offset */ +#define CONFIG_SYS_ATA_ALT_OFFSET 0x200 /* alternate register offset */ -#define CFG_FIRST_PCMCIA_BUS 1 +#define CONFIG_SYS_FIRST_PCMCIA_BUS 1 #undef CONFIG_IDE_LED /* no led for ide supported */ #undef CONFIG_IDE_RESET /* reset for ide unsupported... */ #undef CONFIG_IDE_RESET_ROUTINE /* no special reset function */ #define CONFIG_IDE_TI_CARDBUS -#define CFG_PCMCIA_CIS_WIN 0x27f00000 -#define CFG_PCMCIA_CIS_WIN_SIZE 0x00100000 -#define CFG_PCMCIA_IO_WIN 0xe000 -#define CFG_PCMCIA_IO_WIN_SIZE 16 +#define CONFIG_SYS_PCMCIA_CIS_WIN 0x27f00000 +#define CONFIG_SYS_PCMCIA_CIS_WIN_SIZE 0x00100000 +#define CONFIG_SYS_PCMCIA_IO_WIN 0xe000 +#define CONFIG_SYS_PCMCIA_IO_WIN_SIZE 16 /************************************************************ * DISK Partition support @@ -239,9 +239,9 @@ #define CONFIG_PCI_PNP /* pci plug-and-play */ #define CONFIG_PCI_SCAN_SHOW -#define CFG_FIRST_PCI_IRQ 9 -#define CFG_SECOND_PCI_IRQ 10 -#define CFG_THIRD_PCI_IRQ 11 -#define CFG_FORTH_PCI_IRQ 12 +#define CONFIG_SYS_FIRST_PCI_IRQ 9 +#define CONFIG_SYS_SECOND_PCI_IRQ 10 +#define CONFIG_SYS_THIRD_PCI_IRQ 11 +#define CONFIG_SYS_FORTH_PCI_IRQ 12 #endif /* __CONFIG_H */ |