diff options
Diffstat (limited to 'include/configs/smartweb.h')
| -rw-r--r-- | include/configs/smartweb.h | 53 |
1 files changed, 40 insertions, 13 deletions
diff --git a/include/configs/smartweb.h b/include/configs/smartweb.h index d696d4bece..d189c3fde9 100644 --- a/include/configs/smartweb.h +++ b/include/configs/smartweb.h @@ -28,6 +28,7 @@ * In this case SoC is defined in boards.cfg. */ #include <asm/hardware.h> +#include <linux/sizes.h> /* * Warning: changing CONFIG_SYS_TEXT_BASE requires adapting the initial boot @@ -64,7 +65,7 @@ */ #define CONFIG_NR_DRAM_BANKS 1 #define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_CS1 -#define CONFIG_SYS_SDRAM_SIZE (64 << 20) +#define CONFIG_SYS_SDRAM_SIZE (64 * SZ_1M) /* * Perform a SDRAM Memtest from the start of SDRAM @@ -75,7 +76,7 @@ /* Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN \ - ROUND(3 * CONFIG_ENV_SIZE + (128 << 10), 0x1000) + ROUND(3 * CONFIG_ENV_SIZE + (4 * SZ_1M), 0x1000) /* NAND flash settings */ #define CONFIG_NAND_ATMEL @@ -140,15 +141,42 @@ #if !defined(CONFIG_SPL_BUILD) /* USB configuration */ +#define CONFIG_CMD_USB #define CONFIG_USB_ATMEL #define CONFIG_USB_ATMEL_CLK_SEL_PLLB #define CONFIG_USB_OHCI_NEW -#define CONFIG_USB_STORAGE -#define CONFIG_DOS_PARTITION #define CONFIG_SYS_USB_OHCI_CPU_INIT #define CONFIG_SYS_USB_OHCI_REGS_BASE ATMEL_UHP_BASE #define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9260" #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2 + +#define CONFIG_USB_HOST_ETHER +#define CONFIG_USB_ETHER_ASIX +#define CONFIG_USB_ETHER_MCS7830 + +/* USB DFU support */ +#define CONFIG_CMD_MTDPARTS +#define CONFIG_MTD_DEVICE +#define CONFIG_MTD_PARTITIONS + +#define CONFIG_USB_GADGET +#define CONFIG_USB_GADGET_AT91 + +/* DFU class support */ +#define CONFIG_CMD_DFU +#define CONFIG_USB_FUNCTION_DFU +#define CONFIG_DFU_NAND +#define CONFIG_USB_GADGET_DOWNLOAD +#define CONFIG_USB_GADGET_VBUS_DRAW 2 +#define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_1M +#define DFU_MANIFEST_POLL_TIMEOUT 25000 + +/* USB DFU IDs */ +#define CONFIG_G_DNL_VENDOR_NUM 0x0908 +#define CONFIG_G_DNL_PRODUCT_NUM 0x02d2 +#define CONFIG_G_DNL_MANUFACTURER "Siemens AG" + +#define CONFIG_SYS_CACHELINE_SIZE 0x2000 #endif /* General Boot Parameter */ @@ -173,8 +201,8 @@ #define CONFIG_ENV_IS_IN_NAND #define CONFIG_ENV_OFFSET (0x100000) #define CONFIG_ENV_OFFSET_REDUND (0x180000) -#define CONFIG_ENV_RANGE (0x80000) -#define CONFIG_ENV_SIZE (0x20000) +#define CONFIG_ENV_RANGE (SZ_512K) +#define CONFIG_ENV_SIZE (SZ_128K) /* * Predefined environment variables. @@ -193,7 +221,6 @@ #undef CONFIG_CMD_LOADS #define CONFIG_CMD_NAND -#define CONFIG_CMD_USB #define CONFIG_CMD_FAT #ifdef CONFIG_MACB @@ -230,10 +257,10 @@ /* Defines for SPL */ #define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_TEXT_BASE 0x0 -#define CONFIG_SPL_MAX_SIZE (4 * 1024) +#define CONFIG_SPL_MAX_SIZE (SZ_4K) #define CONFIG_SPL_BSS_START_ADDR CONFIG_SYS_SDRAM_BASE -#define CONFIG_SPL_BSS_MAX_SIZE (16 * 1024) +#define CONFIG_SPL_BSS_MAX_SIZE (SZ_16K) #define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SPL_BSS_START_ADDR + \ CONFIG_SPL_BSS_MAX_SIZE) #define CONFIG_SYS_SPL_MALLOC_SIZE CONFIG_SYS_MALLOC_LEN @@ -253,14 +280,14 @@ #define CONFIG_SPL_NAND_RAW_ONLY #define CONFIG_SPL_NAND_SOFTECC #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x20000 -#define CONFIG_SYS_NAND_U_BOOT_SIZE 0x80000 +#define CONFIG_SYS_NAND_U_BOOT_SIZE SZ_512K #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_NAND_U_BOOT_DST CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_NAND_5_ADDR_CYCLE -#define CONFIG_SYS_NAND_SIZE (256*1024*1024) -#define CONFIG_SYS_NAND_PAGE_SIZE 2048 -#define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024) +#define CONFIG_SYS_NAND_SIZE (SZ_256M) +#define CONFIG_SYS_NAND_PAGE_SIZE SZ_2K +#define CONFIG_SYS_NAND_BLOCK_SIZE (SZ_128K) #define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \ CONFIG_SYS_NAND_PAGE_SIZE) #define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS |