diff options
Diffstat (limited to 'include/configs/snowball.h')
| -rw-r--r-- | include/configs/snowball.h | 266 |
1 files changed, 266 insertions, 0 deletions
diff --git a/include/configs/snowball.h b/include/configs/snowball.h new file mode 100644 index 0000000000..30f4a4eb55 --- /dev/null +++ b/include/configs/snowball.h @@ -0,0 +1,266 @@ +/* + * Copyright (C) ST-Ericsson SA 2009 + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * #define DEBUG 1 + */ + +#define CONFIG_SKIP_LOWLEVEL_INIT +#define CONFIG_SNOWBALL +#define CONFIG_SYS_ICACHE_OFF +#define CONFIG_SYS_DCACHE_OFF +#define CONFIG_ARCH_CPU_INIT +#define CONFIG_BOARD_LATE_INIT + +/* + * High Level Configuration Options + * (easy to change) + */ +#define CONFIG_U8500 +#define CONFIG_L2_OFF + +#define CONFIG_SYS_MEMTEST_START 0x00000000 +#define CONFIG_SYS_MEMTEST_END 0x1FFFFFFF +#define CONFIG_SYS_HZ 1000 /* must be 1000 */ + +/*----------------------------------------------------------------------- + * Size of environment and malloc() pool + */ +/* + * If you use U-Boot as crash kernel, make sure that it does not overwrite + * information saved by kexec during panic. Kexec expects the start + * address of the executable 32K above "crashkernel" address. + */ +/* + * Size of malloc() pool + */ +#define CONFIG_ENV_SIZE (8*1024) +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 256*1024) + +#define CONFIG_SYS_GBL_DATA_SIZE 128 /* for initial data */ + +#define CONFIG_ENV_IS_IN_MMC +#define CONFIG_CMD_ENV +#define CONFIG_CMD_SAVEENV +#define CONFIG_ENV_OFFSET 0x0118000 +#define CONFIG_SYS_MMC_ENV_DEV 0 /* SLOT2: eMMC */ + +/* + * PL011 Configuration + */ +#define CONFIG_PL011_SERIAL +#define CONFIG_PL011_SERIAL_RLCR +#define CONFIG_PL011_SERIAL_FLUSH_ON_INIT + +/* + * U8500 UART registers base for 3 serial devices + */ +#define CFG_UART0_BASE 0x80120000 +#define CFG_UART1_BASE 0x80121000 +#define CFG_UART2_BASE 0x80007000 +#define CFG_SERIAL0 CFG_UART0_BASE +#define CFG_SERIAL1 CFG_UART1_BASE +#define CFG_SERIAL2 CFG_UART2_BASE +#define CONFIG_PL011_CLOCK 38400000 +#define CONFIG_PL01x_PORTS { (void *)CFG_SERIAL0, (void *)CFG_SERIAL1, \ + (void *)CFG_SERIAL2 } +#define CONFIG_CONS_INDEX 2 +#define CONFIG_BAUDRATE 115200 + +/* + * Devices and file systems + */ +#define CONFIG_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_DOS_PARTITION + +/* + * Commands + */ +#define CONFIG_CMD_MEMORY +#define CONFIG_CMD_BOOTD +#define CONFIG_CMD_BDI +#define CONFIG_CMD_IMI +#define CONFIG_CMD_MISC +#define CONFIG_CMD_RUN +#define CONFIG_CMD_ECHO +#define CONFIG_CMD_CONSOLE +#define CONFIG_CMD_LOADS +#define CONFIG_CMD_LOADB +#define CONFIG_CMD_MMC +#define CONFIG_CMD_FAT +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_SOURCE + +#ifndef CONFIG_BOOTDELAY +#define CONFIG_BOOTDELAY 1 +#endif +#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ + +#undef CONFIG_BOOTARGS +#define CONFIG_BOOTCOMMAND \ +"mmc dev 1; " \ + "if run loadbootscript; " \ + "then run bootscript; " \ + "else " \ + "if run mmcload; " \ + "then run mmcboot; " \ + "else " \ + "mmc dev 0; " \ + "if run emmcloadbootscript; " \ + "then run bootscript; " \ + "else " \ + "if run emmcload; " \ + "then run emmcboot; " \ + "else " \ + "echo No media to boot from; " \ + "fi; " \ + "fi; " \ + "fi; " \ + "fi; " + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "verify=n\0" \ + "loadaddr=0x00100000\0" \ + "console=ttyAMA2,115200n8\0" \ + "loadbootscript=fatload mmc 1:1 ${loadaddr} boot.scr\0" \ + "emmcloadbootscript=fatload mmc 0:2 ${loadaddr} boot.scr\0" \ + "bootscript=echo Running bootscript " \ + "from mmc ...; source ${loadaddr}\0" \ + "memargs256=mem=96M@0 mem_modem=32M@96M mem=32M@128M " \ + "hwmem=22M@160M pmem_hwb=42M@182M mem_mali=32@224M\0" \ + "memargs512=mem=96M@0 mem_modem=32M@96M hwmem=32M@128M " \ + "mem=64M@160M mem_mali=32M@224M " \ + "pmem_hwb=128M@256M mem=128M@384M\0" \ + "memargs1024=mem=128M@0 mali.mali_mem=32M@128M " \ + "hwmem=168M@M160M mem=48M@328M " \ + "mem_issw=1M@383M mem=640M@384M\0" \ + "memargs=setenv bootargs ${bootargs} ${memargs1024}\0" \ + "emmcload=fatload mmc 0:2 ${loadaddr} uImage\0" \ + "mmcload=fatload mmc 1:1 ${loadaddr} uImage\0" \ + "commonargs=setenv bootargs console=${console} " \ + "vmalloc=300M\0" \ + "emmcargs=setenv bootargs ${bootargs} " \ + "root=/dev/mmcblk0p3 " \ + "rootwait\0" \ + "addcons=setenv bootargs ${bootargs} " \ + "console=${console}\0" \ + "emmcboot=echo Booting from eMMC ...; " \ + "run commonargs emmcargs memargs; " \ + "bootm ${loadaddr}\0" \ + "mmcargs=setenv bootargs ${bootargs} " \ + "root=/dev/mmcblk1p2 " \ + "rootwait earlyprintk\0" \ + "mmcboot=echo Booting from external MMC ...; " \ + "run commonargs mmcargs memargs; " \ + "bootm ${loadaddr}\0" \ + "fdt_high=0x2BC00000\0" \ + "stdout=serial,usbtty\0" \ + "stdin=serial,usbtty\0" \ + "stderr=serial,usbtty\0" + +/*----------------------------------------------------------------------- + * Miscellaneous configurable options + */ + +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_PROMPT "U8500 $ " /* Monitor Command Prompt */ +#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ + +/* Print Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \ + + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_MAXARGS 32 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Arg Buffer Size */ + +#undef CONFIG_SYS_CLKS_IN_HZ /* everything, incl board info, in Hz */ +#define CONFIG_SYS_LOAD_ADDR 0x00100000 /* default load address */ +#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 + +#define CONFIG_SYS_HUSH_PARSER 1 +#define CONFIG_CMDLINE_EDITING + +#define CONFIG_SETUP_MEMORY_TAGS 2 +#define CONFIG_INITRD_TAG 1 +#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ + +/* + * Physical Memory Map + */ +#define CONFIG_NR_DRAM_BANKS 1 +#define PHYS_SDRAM_1 0x00000000 /* DDR-SDRAM Bank #1 */ + +/* + * additions for new relocation code + */ +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 +#define CONFIG_SYS_MAX_RAM_SIZE 0x40000000 +#define CONFIG_SYS_INIT_RAM_SIZE 0x100000 +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_SDRAM_BASE + \ + CONFIG_SYS_INIT_RAM_SIZE - \ + GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_GBL_DATA_OFFSET + +/* landing address before relocation */ +#ifndef CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_TEXT_BASE 0x0 +#endif + +/* + * MMC related configs + */ +#define CONFIG_ARM_PL180_MMCI +#define MMC_BLOCK_SIZE 512 +#define CFG_EMMC_BASE 0x80114000 +#define CFG_MMC_BASE 0x80126000 + +/* + * FLASH and environment organization + */ +#define CONFIG_SYS_NO_FLASH + +/* + * base register values for U8500 + */ +#define CFG_PRCMU_BASE 0x80157000 /* Power, reset and clock */ + + +/* + * U8500 GPIO register base for 9 banks + */ +#define CONFIG_DB8500_GPIO +#define CFG_GPIO_0_BASE 0x8012E000 +#define CFG_GPIO_1_BASE 0x8012E080 +#define CFG_GPIO_2_BASE 0x8000E000 +#define CFG_GPIO_3_BASE 0x8000E080 +#define CFG_GPIO_4_BASE 0x8000E100 +#define CFG_GPIO_5_BASE 0x8000E180 +#define CFG_GPIO_6_BASE 0x8011E000 +#define CFG_GPIO_7_BASE 0x8011E080 +#define CFG_GPIO_8_BASE 0xA03FE000 + +#define CFG_FSMC_BASE 0x80000000 /* FSMC Controller */ + +#endif /* __CONFIG_H */ |