diff options
Diffstat (limited to 'include/configs/sunxi-common.h')
| -rw-r--r-- | include/configs/sunxi-common.h | 104 |
1 files changed, 95 insertions, 9 deletions
diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h index cc450e02e6..e839053e2b 100644 --- a/include/configs/sunxi-common.h +++ b/include/configs/sunxi-common.h @@ -27,6 +27,14 @@ #define CONFIG_SYS_TEXT_BASE 0x4a000000 +#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_DM) +# define CONFIG_CMD_DM +# define CONFIG_DM_GPIO +# define CONFIG_DM_SERIAL +# define CONFIG_DW_SERIAL +# define CONFIG_SYS_MALLOC_F_LEN (1 << 10) +#endif + /* * Display CPU information */ @@ -36,13 +44,15 @@ #define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL /* ns16550 reg in the low bits of cpu reg */ -#define CONFIG_SYS_NS16550_REG_SIZE -4 #define CONFIG_SYS_NS16550_CLK 24000000 -#define CONFIG_SYS_NS16550_COM1 SUNXI_UART0_BASE -#define CONFIG_SYS_NS16550_COM2 SUNXI_UART1_BASE -#define CONFIG_SYS_NS16550_COM3 SUNXI_UART2_BASE -#define CONFIG_SYS_NS16550_COM4 SUNXI_UART3_BASE -#define CONFIG_SYS_NS16550_COM5 SUNXI_R_UART_BASE +#ifndef CONFIG_DM_SERIAL +# define CONFIG_SYS_NS16550_REG_SIZE -4 +# define CONFIG_SYS_NS16550_COM1 SUNXI_UART0_BASE +# define CONFIG_SYS_NS16550_COM2 SUNXI_UART1_BASE +# define CONFIG_SYS_NS16550_COM3 SUNXI_UART2_BASE +# define CONFIG_SYS_NS16550_COM4 SUNXI_UART3_BASE +# define CONFIG_SYS_NS16550_COM5 SUNXI_R_UART_BASE +#endif /* DRAM Base */ #define CONFIG_SYS_SDRAM_BASE 0x40000000 @@ -150,7 +160,10 @@ #define CONFIG_SPL_MAX_SIZE 0x5fe0 /* 24KB on sun4i/sun7i */ #define CONFIG_SPL_LIBDISK_SUPPORT + +#if !defined(CONFIG_UART0_PORT_F) #define CONFIG_SPL_MMC_SUPPORT +#endif #define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv7/sunxi/u-boot-spl.lds" @@ -187,6 +200,38 @@ #define CONFIG_SPL_GPIO_SUPPORT #define CONFIG_CMD_GPIO +#ifdef CONFIG_VIDEO +/* + * The amount of RAM that is reserved for the FB. This will not show up as + * RAM to the kernel, but will be reclaimed by a KMS driver in future. + */ +#define CONFIG_SUNXI_FB_SIZE (9 << 20) + +/* Do we want to initialize a simple FB? */ +#define CONFIG_VIDEO_DT_SIMPLEFB + +#define CONFIG_VIDEO_SUNXI + +#define CONFIG_CFB_CONSOLE +#define CONFIG_VIDEO_SW_CURSOR +#define CONFIG_VIDEO_LOGO +#define CONFIG_VIDEO_STD_TIMINGS +#define CONFIG_I2C_EDID + +/* allow both serial and cfb console. */ +#define CONFIG_CONSOLE_MUX +/* stop x86 thinking in cfbconsole from trying to init a pc keyboard */ +#define CONFIG_VGA_AS_SINGLE_DEVICE + +#define CONFIG_SYS_MEM_TOP_HIDE ((CONFIG_SUNXI_FB_SIZE + 0xFFF) & ~0xFFF) + +/* To be able to hook simplefb into dt */ +#ifdef CONFIG_VIDEO_DT_SIMPLEFB +#define CONFIG_OF_BOARD_SETUP +#endif + +#endif /* CONFIG_VIDEO */ + /* Ethernet support */ #ifdef CONFIG_SUNXI_EMAC #define CONFIG_MII /* MII PHY management */ @@ -207,6 +252,13 @@ #define CONFIG_USB_STORAGE #endif +#ifdef CONFIG_USB_KEYBOARD +#define CONFIG_CONSOLE_MUX +#define CONFIG_PREBOOT +#define CONFIG_SYS_STDIO_DEREGISTER +#define CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE +#endif + #if !defined CONFIG_ENV_IS_IN_MMC && \ !defined CONFIG_ENV_IS_IN_NAND && \ !defined CONFIG_ENV_IS_IN_FAT && \ @@ -215,14 +267,24 @@ #endif #define CONFIG_MISC_INIT_R +#define CONFIG_SYS_CONSOLE_IS_IN_ENV #ifndef CONFIG_SPL_BUILD #include <config_distro_defaults.h> -/* 256M RAM (minimum), 32M uncompressed kernel, 16M compressed kernel, 1M fdt, - * 1M script, 1M pxe and the ramdisk at the end */ +/* Enable pre-console buffer to get complete log on the VGA console */ +#define CONFIG_PRE_CONSOLE_BUFFER +#define CONFIG_PRE_CON_BUF_SZ (1024 * 1024) +/* Use the room between the end of bootm_size and the framebuffer */ +#define CONFIG_PRE_CON_BUF_ADDR 0x4f000000 + +/* + * 240M RAM (256M minimum minus space for the framebuffer), + * 32M uncompressed kernel, 16M compressed kernel, 1M fdt, + * 1M script, 1M pxe and the ramdisk at the end. + */ #define MEM_LAYOUT_ENV_SETTINGS \ - "bootm_size=0x10000000\0" \ + "bootm_size=0xf000000\0" \ "kernel_addr_r=0x42000000\0" \ "fdt_addr_r=0x43000000\0" \ "scriptaddr=0x43100000\0" \ @@ -256,7 +318,31 @@ #include <config_distro_bootcmd.h> +#ifdef CONFIG_USB_KEYBOARD +#define CONSOLE_STDIN_SETTINGS \ + "preboot=usb start\0" \ + "stdin=serial,usbkbd\0" +#else +#define CONSOLE_STDIN_SETTINGS \ + "stdin=serial\0" +#endif + +#ifdef CONFIG_VIDEO +#define CONSOLE_STDOUT_SETTINGS \ + "stdout=serial,vga\0" \ + "stderr=serial,vga\0" +#else +#define CONSOLE_STDOUT_SETTINGS \ + "stdout=serial\0" \ + "stderr=serial\0" +#endif + +#define CONSOLE_ENV_SETTINGS \ + CONSOLE_STDIN_SETTINGS \ + CONSOLE_STDOUT_SETTINGS + #define CONFIG_EXTRA_ENV_SETTINGS \ + CONSOLE_ENV_SETTINGS \ MEM_LAYOUT_ENV_SETTINGS \ "fdtfile=" CONFIG_FDTFILE "\0" \ "console=ttyS0,115200\0" \ |