diff options
Diffstat (limited to 'include/configs/taurus.h')
| -rw-r--r-- | include/configs/taurus.h | 120 |
1 files changed, 106 insertions, 14 deletions
diff --git a/include/configs/taurus.h b/include/configs/taurus.h index 2c9f5da55a..12994c8065 100644 --- a/include/configs/taurus.h +++ b/include/configs/taurus.h @@ -20,6 +20,7 @@ * In this case SoC is defined in boards.cfg. */ #include <asm/hardware.h> +#include <linux/sizes.h> #define CONFIG_SYS_GENERIC_BOARD @@ -80,14 +81,14 @@ */ #define CONFIG_NR_DRAM_BANKS 1 #define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_CS1 -#define CONFIG_SYS_SDRAM_SIZE (128 * 1024 * 1024) +#define CONFIG_SYS_SDRAM_SIZE (128 * SZ_1M) /* * Initial stack pointer: 4k - GENERATED_GBL_DATA_SIZE in internal SRAM, * leaving the correct space for initial global data structure above * that address while providing maximum stack area below. */ -# define CONFIG_SYS_INIT_SP_ADDR \ +#define CONFIG_SYS_INIT_SP_ADDR \ (ATMEL_BASE_SRAM1 + 0x1000 - GENERATED_GBL_DATA_SIZE) /* NAND flash */ @@ -111,6 +112,7 @@ #define CONFIG_AT91_WANTS_COMMON_PHY #define CONFIG_AT91SAM9_WATCHDOG +#define CONFIG_AT91_HW_WDT_TIMEOUT 15 #if !defined(CONFIG_SPL_BUILD) /* Enable the watchdog */ #define CONFIG_HW_WATCHDOG @@ -119,12 +121,38 @@ /* USB */ #if defined(CONFIG_BOARD_TAURUS) #define CONFIG_USB_ATMEL +#define CONFIG_USB_ATMEL_CLK_SEL_PLLB #define CONFIG_USB_OHCI_NEW #define CONFIG_SYS_USB_OHCI_CPU_INIT #define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00500000 #define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9260" #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2 #define CONFIG_USB_STORAGE + +/* USB DFU support */ +#define CONFIG_CMD_MTDPARTS +#define CONFIG_MTD_DEVICE +#define CONFIG_MTD_PARTITIONS + +#define CONFIG_USB_GADGET +#define CONFIG_USB_GADGET_AT91 + +/* DFU class support */ +#define CONFIG_CMD_USB +#define CONFIG_CMD_DFU +#define CONFIG_USB_FUNCTION_DFU +#define CONFIG_DFU_NAND +#define CONFIG_USB_GADGET_DOWNLOAD +#define CONFIG_USB_GADGET_VBUS_DRAW 2 +#define CONFIG_SYS_DFU_DATA_BUF_SIZE (SZ_1M) +#define DFU_MANIFEST_POLL_TIMEOUT 25000 + +/* USB DFU IDs */ +#define CONFIG_G_DNL_VENDOR_NUM 0x0908 +#define CONFIG_G_DNL_PRODUCT_NUM 0x02d2 +#define CONFIG_G_DNL_MANUFACTURER "Siemens AG" + +#define CONFIG_SYS_CACHELINE_SIZE SZ_8K #endif /* SPI EEPROM */ @@ -145,8 +173,8 @@ #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000 #define CONFIG_SF_DEFAULT_BUS 0 -#define CONFIG_SF_DEFAULT_SPEED 10000000 -#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 +#define CONFIG_SF_DEFAULT_SPEED 1000000 +#define CONFIG_SF_DEFAULT_MODE SPI_MODE_3 #endif /* load address */ @@ -156,14 +184,77 @@ #define CONFIG_ENV_IS_IN_NAND #define CONFIG_ENV_OFFSET 0x100000 #define CONFIG_ENV_OFFSET_REDUND 0x180000 -#define CONFIG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */ +#define CONFIG_ENV_SIZE (SZ_128K) /* 1 sector = 128 kB */ #define CONFIG_BOOTCOMMAND "nand read 0x22000000 0x200000 0x300000; bootm" -#define CONFIG_BOOTARGS \ + +#if defined(CONFIG_BOARD_TAURUS) +#define CONFIG_BOOTARGS_TAURUS \ "console=ttyS0,115200 earlyprintk " \ "mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro," \ "256k(env),256k(env_redundant),256k(spare)," \ "512k(dtb),6M(kernel)ro,-(rootfs) " \ "root=/dev/mtdblock7 rw rootfstype=jffs2" +#endif + +#if defined(CONFIG_BOARD_AXM) +#define CONFIG_BOOTARGS_AXM \ + "\0" \ + "addip=setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:" \ + "${gatewayip}:${netmask}:${hostname}:${netdev}::off\0" \ + "addtest=setenv bootargs ${bootargs} loglevel=4 test\0" \ + "baudrate=115200\0" \ + "boot_file=setenv bootfile /${project_dir}/kernel/uImage\0" \ + "boot_retries=0\0" \ + "bootcmd=run flash_self\0" \ + "bootdelay=3\0" \ + "ethact=macb0\0" \ + "flash_nfs=run nand_kernel;run nfsargs;run addip;upgrade_available;"\ + "bootm ${kernel_ram};reset\0" \ + "flash_self=run nand_kernel;run setbootargs;upgrade_available;" \ + "bootm ${kernel_ram};reset\0" \ + "flash_self_test=run nand_kernel;run setbootargs addtest; " \ + "upgrade_available;bootm ${kernel_ram};reset\0" \ + "hostname=systemone\0" \ + "kernel_Off=0x00200000\0" \ + "kernel_Off_fallback=0x03800000\0" \ + "kernel_ram=0x21500000\0" \ + "kernel_size=0x00400000\0" \ + "kernel_size_fallback=0x00400000\0" \ + "loads_echo=1\0" \ + "nand_kernel=nand read.e ${kernel_ram} ${kernel_Off} " \ + "${kernel_size}\0" \ + "net_nfs=run boot_file;tftp ${kernel_ram} ${bootfile};" \ + "run nfsargs;run addip;upgrade_available;bootm " \ + "${kernel_ram};reset\0" \ + "netdev=eth0\0" \ + "nfsargs=run root_path;setenv bootargs ${bootargs} " \ + "root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \ + "at91sam9_wdt.wdt_timeout=16\0" \ + "partitionset_active=A\0" \ + "preboot=echo;echo Type 'run flash_self' to use kernel and root "\ + "filesystem on memory;echo Type 'run flash_nfs' to use kernel " \ + "from memory and root filesystem over NFS;echo Type 'run net_nfs' "\ + "to get Kernel over TFTP and mount root filesystem over NFS;echo\0"\ + "project_dir=systemone\0" \ + "root_path=setenv rootpath /home/projects/${project_dir}/rootfs\0"\ + "rootfs=/dev/mtdblock5\0" \ + "rootfs_fallback=/dev/mtdblock7\0" \ + "setbootargs=setenv bootargs ${bootargs} console=ttyMTD,mtdoops "\ + "root=${rootfs} rootfstype=jffs2 panic=7 " \ + "at91sam9_wdt.wdt_timeout=16\0" \ + "stderr=serial\0" \ + "stdin=serial\0" \ + "stdout=serial\0" \ + "upgrade_available=0\0" +#endif + +#if defined(CONFIG_BOARD_TAURUS) +#define CONFIG_BOOTARGS CONFIG_BOOTARGS_TAURUS +#endif + +#if defined(CONFIG_BOARD_AXM) +#define CONFIG_BOOTARGS CONFIG_BOOTARGS_AXM +#endif #define CONFIG_SYS_CBSIZE 256 #define CONFIG_SYS_MAXARGS 16 @@ -177,19 +268,19 @@ * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN \ - ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000) + ROUND(3 * CONFIG_ENV_SIZE + SZ_4M, 0x1000) /* Defines for SPL */ #define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_TEXT_BASE 0x0 -#define CONFIG_SPL_MAX_SIZE (14 * 1024) -#define CONFIG_SPL_STACK (16 * 1024) +#define CONFIG_SPL_MAX_SIZE (31 * SZ_512) +#define CONFIG_SPL_STACK (ATMEL_BASE_SRAM1 + SZ_16K) #define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SYS_TEXT_BASE - \ CONFIG_SYS_MALLOC_LEN) #define CONFIG_SYS_SPL_MALLOC_SIZE CONFIG_SYS_MALLOC_LEN #define CONFIG_SPL_BSS_START_ADDR CONFIG_SPL_MAX_SIZE -#define CONFIG_SPL_BSS_MAX_SIZE (3 * 1024) +#define CONFIG_SPL_BSS_MAX_SIZE (3 * SZ_512) #define CONFIG_SPL_LIBCOMMON_SUPPORT #define CONFIG_SPL_LIBGENERIC_SUPPORT @@ -206,14 +297,14 @@ #define CONFIG_SPL_NAND_RAW_ONLY #define CONFIG_SPL_NAND_SOFTECC #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x20000 -#define CONFIG_SYS_NAND_U_BOOT_SIZE 0x80000 +#define CONFIG_SYS_NAND_U_BOOT_SIZE SZ_512K #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_NAND_U_BOOT_DST CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_NAND_5_ADDR_CYCLE -#define CONFIG_SYS_NAND_SIZE (256*1024*1024) -#define CONFIG_SYS_NAND_PAGE_SIZE 2048 -#define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024) +#define CONFIG_SYS_NAND_SIZE (256 * SZ_1M) +#define CONFIG_SYS_NAND_PAGE_SIZE SZ_2K +#define CONFIG_SYS_NAND_BLOCK_SIZE (SZ_128K) #define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \ CONFIG_SYS_NAND_PAGE_SIZE) #define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS @@ -232,4 +323,5 @@ #define CONFIG_SYS_MCKR 0x1300 #define CONFIG_SYS_MCKR_CSS (0x02 | CONFIG_SYS_MCKR) #define CONFIG_SYS_AT91_PLLB 0x10193F05 + #endif |