diff options
Diffstat (limited to 'include/configs/wireless_space.h')
| -rw-r--r-- | include/configs/wireless_space.h | 194 |
1 files changed, 194 insertions, 0 deletions
diff --git a/include/configs/wireless_space.h b/include/configs/wireless_space.h new file mode 100644 index 0000000000..eb20492896 --- /dev/null +++ b/include/configs/wireless_space.h @@ -0,0 +1,194 @@ +/* + * Copyright (C) 2011 Albert ARIBAUD <albert.u.boot@aribaud.net> + * + * Based on the netspace_v2 code which is + * Copyright (C) 2011 Simon Guinot <sguinot@lacie.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _CONFIG_WIRELESS_SPACE_H +#define _CONFIG_WIRELESS_SPACE_H + +/* + * Machine number definition + */ +#define MACH_TYPE_WIRELESS_SPACE 2500 /* is missing in mach-types.h */ +#define CONFIG_MACH_TYPE MACH_TYPE_WIRELESS_SPACE +#define CONFIG_IDENT_STRING " Wireless Space" + +/* + * High Level Configuration Options (easy to change) + */ +#define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */ +#define CONFIG_KIRKWOOD /* SoC Family Name */ +/* SoC name */ +#define CONFIG_KW88F6281 +#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ + +/* + * Commands configuration + */ +#define CONFIG_SYS_NO_FLASH /* no NOR or SPI flash */ +#include <config_cmd_default.h> +#define CONFIG_CMD_ENV +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_PING +#define CONFIG_CMD_NAND +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IDE +#define CONFIG_CMD_USB + +/* + * Core clock definition + */ +#define CONFIG_SYS_TCLK 166000000 /* 166MHz */ + +/* + * SDRAM configuration + */ +#define CONFIG_NR_DRAM_BANKS 1 + +/* + * Different SDRAM configuration and size for some of the boards derived + * from the Network Space v2 + */ + +/* + * mv-common.h should be defined after CMD configs since it used them + * to enable certain macros + */ +#include "mv-common.h" + +/* Remove or override few declarations from mv-common.h */ +#undef CONFIG_RBTREE +#undef CONFIG_SYS_IDE_MAXBUS +#undef CONFIG_SYS_IDE_MAXDEVICE +#define CONFIG_SYS_IDE_MAXBUS 1 +#define CONFIG_SYS_IDE_MAXDEVICE 1 +#undef CONFIG_SYS_PROMPT +#define CONFIG_SYS_PROMPT "ws> " + +/* + * Ethernet Driver configuration + */ +#ifdef CONFIG_CMD_NET +#define CONFIG_MISC_INIT_R /* misc_init_r() initializes MAC address */ +#define CONFIG_MVGBE_PORTS {1, 0} /* enable only egiga0... */ +#define PORT_SERIAL_CONTROL_VALUE 0x00A4260E /* ... tied to the switch... */ +#define CONFIG_PHY_BASE_ADR 0xa /* ... through a 'fake' PHY */ +#define CONFIG_MII +#undef CONFIG_SYS_FAULT_ECHO_LINK_DOWN +#define CONFIG_NETCONSOLE +#define CONFIG_MV88E61XX_SWITCH +#define CONFIG_MV88E61XX_MULTICHIP_ADRMODE +#define CONFIG_MV88E61XX_CMD +#define CONFIG_CMD_TFTPPUT +#endif /* CONFIG_CMD_NET */ + +/* + * SATA Driver configuration + */ +#ifdef CONFIG_MVSATA_IDE +#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET +#endif /* CONFIG_MVSATA_IDE */ + +/* + * Enable GPI0 support + */ +#define CONFIG_KIRKWOOD_GPIO + +/* + * Enable I2C support + */ +#ifdef CONFIG_CMD_I2C +/* I2C EEPROM HT24LC04 (512B - 32 pages of 16 Bytes) */ +#define CONFIG_CMD_EEPROM +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 +#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4 /* 16-byte page size */ +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* 8-bit device address */ +#endif /* CONFIG_CMD_I2C */ + +/* + * Partition support + */ +#define CONFIG_DOS_PARTITION +#define CONFIG_EFI_PARTITION + +/* + * File systems support + */ +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FAT + +/* + * Use the HUSH parser + */ +#define CONFIG_SYS_HUSH_PARSER + +/* + * Console configuration + */ +#define CONFIG_CONSOLE_MUX +#define CONFIG_SYS_CONSOLE_IS_IN_ENV + +/* + * Enable device tree support + */ +#define CONFIG_OF_LIBFDT + +/* + * Environment variables configurations + */ + +#define CONFIG_ENV_IS_IN_NAND +#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128KB */ +#define CONFIG_ENV_SIZE 0x20000 /* 128KB */ +#define CONFIG_ENV_OFFSET 0x80000 /* env starts here */ + +/* + * Board-specific command to make using buttons etc easier + */ + +#define CONFIG_WIRELESS_SPACE_CMD + +/* + * Default environment variables + */ +#define CONFIG_PREBOOT + +#define CONFIG_BOOTARGS "console=ttyS0,115200" + +#define CONFIG_BOOTCOMMAND \ + "if run usbload || run diskload; then bootm; fi" + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "stdin=serial\0" \ + "stdout=serial\0" \ + "stderr=serial\0" \ + "bootfile=uImage\0" \ + "loadaddr=0x800000\0" \ + "autoload=no\0" \ + "netconsole=" \ + "set stdin $stdin,nc; " \ + "set stdout $stdout,nc; " \ + "set stderr $stderr,nc;\0" \ + "diskload=ide reset && " \ + "ext2load ide 0:1 $loadaddr /boot/$bootfile\0" \ + "usbload=usb start && " \ + "fatload usb 0:1 $loadaddr /boot/$bootfile\0" \ + "preboot=" \ + "dhcp && run netconsole\0" + +#endif /* _CONFIG_WIRELESS_SPACE_H */ |