summaryrefslogtreecommitdiff
path: root/include/configs
diff options
context:
space:
mode:
Diffstat (limited to 'include/configs')
-rw-r--r--include/configs/bcm28155_ap.h20
-rw-r--r--include/configs/bur_am335x_common.h67
-rw-r--r--include/configs/bur_cfg_common.h64
-rw-r--r--include/configs/cm_t43.h15
-rw-r--r--include/configs/kwb.h19
-rw-r--r--include/configs/ls1021aqds.h23
-rw-r--r--include/configs/ls1043aqds.h13
-rw-r--r--include/configs/ls1043ardb.h7
-rw-r--r--include/configs/ls2080a_common.h11
-rw-r--r--include/configs/ls2080aqds.h4
-rw-r--r--include/configs/ls2080ardb.h6
-rw-r--r--include/configs/odroid_xu3.h1
-rw-r--r--include/configs/omap3_logic.h2
-rw-r--r--include/configs/rpi-common.h1
-rw-r--r--include/configs/socfpga_common.h3
-rw-r--r--include/configs/stm32f746-disco.h89
-rw-r--r--include/configs/tseries.h14
17 files changed, 236 insertions, 123 deletions
diff --git a/include/configs/bcm28155_ap.h b/include/configs/bcm28155_ap.h
index a257084a03..c9515a8cb8 100644
--- a/include/configs/bcm28155_ap.h
+++ b/include/configs/bcm28155_ap.h
@@ -130,7 +130,6 @@
#define CONFIG_CMD_BOOTZ
#define CONFIG_FAT_WRITE
-
/* Fastboot and USB OTG */
#define CONFIG_USB_FUNCTION_FASTBOOT
#define CONFIG_CMD_FASTBOOT
@@ -150,23 +149,4 @@
#define CONFIG_G_DNL_PRODUCT_NUM 0x0d02 /* nexus one */
#define CONFIG_G_DNL_MANUFACTURER "Broadcom Corporation"
-/* Fastboot and USB OTG */
-#define CONFIG_USB_FUNCTION_FASTBOOT
-#define CONFIG_CMD_FASTBOOT
-#define CONFIG_FASTBOOT_FLASH
-#define CONFIG_FASTBOOT_FLASH_MMC_DEV 0
-#define CONFIG_SYS_CACHELINE_SIZE 64
-#define CONFIG_USB_FASTBOOT_BUF_SIZE (CONFIG_SYS_SDRAM_SIZE - SZ_1M)
-#define CONFIG_USB_FASTBOOT_BUF_ADDR CONFIG_SYS_SDRAM_BASE
-#define CONFIG_USB_GADGET
-#define CONFIG_USB_GADGET_DUALSPEED
-#define CONFIG_USB_GADGET_VBUS_DRAW 0
-#define CONFIG_USB_GADGET_S3C_UDC_OTG
-#define CONFIG_USB_GADGET_BCM_UDC_OTG_PHY
-#define CONFIG_USB_GADGET_DOWNLOAD
-#define CONFIG_USBID_ADDR 0x34052c46
-#define CONFIG_G_DNL_VENDOR_NUM 0x18d1 /* google */
-#define CONFIG_G_DNL_PRODUCT_NUM 0x0d02 /* nexus one */
-#define CONFIG_G_DNL_MANUFACTURER "Broadcom Corporation"
-
#endif /* __BCM28155_AP_H */
diff --git a/include/configs/bur_am335x_common.h b/include/configs/bur_am335x_common.h
index ffc6811bb9..a94b1e2711 100644
--- a/include/configs/bur_am335x_common.h
+++ b/include/configs/bur_am335x_common.h
@@ -3,7 +3,7 @@
*
* common parts used by B&R AM335x based boards
*
- * Copyright (C) 2013 Hannes Schmelzer <oe5hpm@oevsv.at> -
+ * Copyright (C) 2016 Hannes Schmelzer <oe5hpm@oevsv.at> -
* Bernecker & Rainer Industrieelektronik GmbH - http://www.br-automation.com
*
* SPDX-License-Identifier: GPL-2.0+
@@ -12,25 +12,9 @@
#ifndef __BUR_AM335X_COMMON_H__
#define __BUR_AM335X_COMMON_H__
/* ------------------------------------------------------------------------- */
-#define BUR_COMMON_ENV \
-"usbscript=usb start && fatload usb 0 0x80000000 usbscript.img && source\0" \
-"brdefaultip=if test -r ${ipaddr}; then; else" \
-" setenv ipaddr 192.168.60.1; setenv serverip 192.168.60.254;" \
-" setenv gatewayip 192.168.60.254; setenv netmask 255.255.255.0; fi;\0" \
-"netconsole=echo switching to network console ...; " \
-"if dhcp; then; else run brdefaultip; fi; setenv ncip ${serverip}; " \
-"setcurs 1 9; lcdputs myip; setcurs 10 9; lcdputs ${ipaddr};" \
-"setcurs 1 10;lcdputs serverip; setcurs 10 10; lcdputs ${serverip};" \
-"setenv stdout nc;setenv stdin nc;setenv stderr nc\0"
-
-#define CONFIG_PREBOOT "run brdefaultip"
-#define CONFIG_CMD_TIME
-
-
#define CONFIG_AM33XX
#define CONFIG_OMAP
#define CONFIG_OMAP_COMMON
-#define CONFIG_BOARD_LATE_INIT
#define CONFIG_SYS_CACHELINE_SIZE 64
#define CONFIG_MAX_RAM_BANK_SIZE (1024 << 20) /* 1GB */
@@ -53,24 +37,11 @@
#define CONFIG_BAUDRATE 115200
/* Network defines */
-#define CONFIG_CMD_DHCP
-#define CONFIG_BOOTP_DNS /* Configurable parts of CMD_DHCP */
-#define CONFIG_BOOTP_SEND_HOSTNAME
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_NET_RETRY_COUNT 2
-#define CONFIG_CMD_PING
#define CONFIG_DRIVER_TI_CPSW /* Driver for IP block */
#define CONFIG_MII /* Required in net/eth.c */
-#define CONFIG_SPL_ETH_SUPPORT
#define CONFIG_PHYLIB
#define CONFIG_PHY_NATSEMI
-#define CONFIG_SPL_NET_SUPPORT
-#define CONFIG_SPL_ENV_SUPPORT /* used for a fetching MAC-Address */
-#define CONFIG_SPL_NET_VCI_STRING "AM335x U-Boot SPL"
-/* Network console */
-#define CONFIG_NETCONSOLE 1
-#define CONFIG_BOOTP_MAY_FAIL /* if we don't have DHCP environment */
+
/*
* SPL related defines. The Public RAM memory map the ROM defines the
* area between 0x402F0400 and 0x4030B800 as a download area and
@@ -109,42 +80,8 @@
#define CONFIG_SYS_OMAP24_I2C_SPEED 100000
#define CONFIG_SYS_OMAP24_I2C_SLAVE 1
#define CONFIG_SYS_I2C_OMAP24XX
-#define CONFIG_CMD_I2C
/* GPIO */
#define CONFIG_OMAP_GPIO
-/*
- * ----------------------------------------------------------------------------
- * The following are general good-enough settings for U-Boot. We set a
- * large malloc pool as we generally have a lot of DDR, and we opt for
- * function over binary size in the main portion of U-Boot as this is
- * generally easily constrained later if needed. We enable the config
- * options that give us information in the environment about what board
- * we are on so we do not need to rely on the command prompt. We set a
- * console baudrate of 115200 and use the default baud rate table.
- */
-#define CONFIG_SYS_MALLOC_LEN (5120 << 10)
-#define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_CONSOLE_INFO_QUIET
-#define CONFIG_ENV_OVERWRITE /* Overwrite ethaddr / serial# */
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV
-#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
-
-/* As stated above, the following choices are optional. */
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_AUTO_COMPLETE
-#define CONFIG_CMDLINE_EDITING
-#define CONFIG_VERSION_VARIABLE
-
-/* We set the max number of command args high to avoid HUSH bugs. */
-#define CONFIG_SYS_MAXARGS 64
-
-/* Console I/O Buffer Size */
-#define CONFIG_SYS_CBSIZE 512
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE +\
- sizeof(CONFIG_SYS_PROMPT) + 16)
-/* Boot Argument Buffer Size */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
/*
* Our platforms make use of SPL to initalize the hardware (primarily
diff --git a/include/configs/bur_cfg_common.h b/include/configs/bur_cfg_common.h
new file mode 100644
index 0000000000..f1837752ca
--- /dev/null
+++ b/include/configs/bur_cfg_common.h
@@ -0,0 +1,64 @@
+/*
+ * bur_cfg_common.h
+ *
+ * common parts used over all B&R boards
+ *
+ * Copyright (C) 2016 Hannes Schmelzer <oe5hpm@oevsv.at> -
+ * Bernecker & Rainer Industrieelektronik GmbH - http://www.br-automation.com
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __BUR_CFG_COMMON_H__
+#define __BUR_CFG_COMMON_H__
+/* ------------------------------------------------------------------------- */
+#define BUR_COMMON_ENV \
+"usbscript=usb start && fatload usb 0 ${scradr} usbscript.img &&" \
+" source ${scradr}\0" \
+"brdefaultip=if test -r ${ipaddr}; then; else" \
+" setenv ipaddr 192.168.60.1; setenv serverip 192.168.60.254;" \
+" setenv gatewayip 192.168.60.254; setenv netmask 255.255.255.0; fi;\0" \
+"netconsole=echo switching to network console ...; " \
+"if dhcp; then; else run brdefaultip; fi; setenv ncip ${serverip}; " \
+"setcurs 1 9; lcdputs myip; setcurs 10 9; lcdputs ${ipaddr};" \
+"setcurs 1 10;lcdputs serverip; setcurs 10 10; lcdputs ${serverip};" \
+"setenv stdout nc;setenv stdin nc;setenv stderr nc\0"
+
+#define CONFIG_PREBOOT "run cfgscr; run brdefaultip"
+
+#define CONFIG_BOARD_LATE_INIT
+
+/* Network defines */
+#define CONFIG_BOOTP_DNS /* Configurable parts of CMD_DHCP */
+#define CONFIG_BOOTP_SEND_HOSTNAME
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_NET_RETRY_COUNT 2
+
+/* Network console */
+#define CONFIG_NETCONSOLE 1
+#define CONFIG_BOOTP_MAY_FAIL /* if we don't have DHCP environment */
+
+#define CONFIG_SYS_CONSOLE_INFO_QUIET
+#define CONFIG_ENV_OVERWRITE /* Overwrite ethaddr / serial# */
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
+
+/* As stated above, the following choices are optional. */
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_AUTO_COMPLETE
+#define CONFIG_CMDLINE_EDITING
+#define CONFIG_VERSION_VARIABLE
+
+/* We set the max number of command args high to avoid HUSH bugs. */
+#define CONFIG_SYS_MAXARGS 64
+
+/* Console I/O Buffer Size */
+#define CONFIG_SYS_CBSIZE 512
+/* Print Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE +\
+ sizeof(CONFIG_SYS_PROMPT) + 16)
+/* Boot Argument Buffer Size */
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
+
+#endif /* __BUR_CFG_COMMON_H__ */
diff --git a/include/configs/cm_t43.h b/include/configs/cm_t43.h
index d3cd38d70f..1c1951c4c5 100644
--- a/include/configs/cm_t43.h
+++ b/include/configs/cm_t43.h
@@ -18,10 +18,12 @@
#include <asm/arch/omap.h>
/* Serial support */
-#define CONFIG_DM_SERIAL
#define CONFIG_SYS_NS16550_SERIAL
#define CONFIG_SYS_NS16550_CLK 48000000
#define CONFIG_SYS_NS16550_COM1 0x44e09000
+#ifdef CONFIG_SPL_BUILD
+#define CONFIG_SYS_NS16550_REG_SIZE (-4)
+#endif
/* NAND support */
#define CONFIG_NAND
@@ -68,9 +70,7 @@
#define CONFIG_AM437X_USB2PHY2_HOST
/* SPI Flash support */
-#define CONFIG_SPI_FLASH
#define CONFIG_TI_SPI_MMAP
-#define CONFIG_SPI_FLASH_BAR
#define CONFIG_SF_DEFAULT_SPEED 48000000
#define CONFIG_DEFAULT_SPI_MODE SPI_MODE_3
@@ -98,9 +98,8 @@
#undef CONFIG_SPL_OS_BOOT
#undef CONFIG_SPL_GPIO_SUPPORT
#undef CONFIG_SPL_NAND_SUPPORT
-#undef CONFIG_SPL_BOARD_INIT
-#undef CONFIG_BOOTDELAY
-#include <config_distro_defaults.h>
+#undef CONFIG_SYS_MONITOR_LEN
+#undef CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR
#define CONFIG_ZERO_BOOTDELAY_CHECK
#undef CONFIG_CMD_IMLS
@@ -165,8 +164,12 @@
#define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_SDRAM_BASE + (128 << 20))
#define CONFIG_SPL_POWER_SUPPORT
#define CONFIG_SYS_SPI_U_BOOT_OFFS (256 * 1024)
+#define CONFIG_SYS_MONITOR_LEN (512 * 1024)
+#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x480
#define CONFIG_SPL_SPI_SUPPORT
#define CONFIG_SPL_SPI_FLASH_SUPPORT
#define CONFIG_SPL_SPI_LOAD
+#define CONFIG_SPL_I2C_SUPPORT
+#define CONFIG_SPL_POWER_SUPPORT
#endif /* __CONFIG_CM_T43_H */
diff --git a/include/configs/kwb.h b/include/configs/kwb.h
index 45253b8118..60e6496fad 100644
--- a/include/configs/kwb.h
+++ b/include/configs/kwb.h
@@ -12,6 +12,7 @@
#ifndef __CONFIG_KWB_H__
#define __CONFIG_KWB_H__
+#include <configs/bur_cfg_common.h>
#include <configs/bur_am335x_common.h>
/* ------------------------------------------------------------------------- */
#define CONFIG_AM335X_LCD
@@ -27,6 +28,9 @@
#define CONFIG_BMP_24BMP
#define CONFIG_BMP_32BPP
+/* memory */
+#define CONFIG_SYS_MALLOC_LEN (5 * 1024 * 1024)
+
/* Clock Defines */
#define V_OSCK 26000000 /* Clock output from T2 */
#define V_SCLK (V_OSCK)
@@ -103,10 +107,9 @@ BUR_COMMON_ENV \
#define CONFIG_BOOTDELAY 0
/* undefine command which we not need here */
-#undef CONFIG_BOOTM_NETBSD
-#undef CONFIG_BOOTM_PLAN9
-#undef CONFIG_BOOTM_RTEMS
-#undef CONFIG_CMD_CRC32
+#undef CONFIG_BOOTM_NETBSD
+#undef CONFIG_BOOTM_PLAN9
+#undef CONFIG_BOOTM_RTEMS
/* Support both device trees and ATAGs. */
#define CONFIG_OF_LIBFDT
@@ -122,17 +125,11 @@ BUR_COMMON_ENV \
#define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT
/* attention! not only for gadget, enables also highspeed in hostmode */
#define CONFIG_USB_GADGET_DUALSPEED
-#define CONFIG_USB_MUSB_HOST
#define CONFIG_AM335X_USB0
#define CONFIG_AM335X_USB0_MODE MUSB_HOST
#define CONFIG_AM335X_USB1
#define CONFIG_AM335X_USB1_MODE MUSB_HOST
-#ifdef CONFIG_USB_MUSB_HOST
-#define CONFIG_CMD_USB
-#define CONFIG_USB_STORAGE
-#endif /* CONFIG_USB_MUSB_HOST */
-
#undef CONFIG_ENV_IS_NOWHERE
#define CONFIG_ENV_IS_IN_MMC
#define CONFIG_SYS_MMC_ENV_DEV 0
@@ -151,4 +148,4 @@ BUR_COMMON_ENV \
#define CONFIG_CMD_FS_GENERIC
#endif /* CONFIG_MMC, ... */
-#endif /* ! __CONFIG_TSERIES_H__ */
+#endif /* __CONFIG_KWB_H__ */
diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h
index f6efc55059..39d747f55e 100644
--- a/include/configs/ls1021aqds.h
+++ b/include/configs/ls1021aqds.h
@@ -42,7 +42,7 @@ unsigned long get_board_sys_clk(void);
unsigned long get_board_ddr_clk(void);
#endif
-#ifdef CONFIG_QSPI_BOOT
+#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
#define CONFIG_SYS_CLK_FREQ 100000000
#define CONFIG_DDR_CLK_FREQ 100000000
#define CONFIG_QIXIS_I2C_ACCESS
@@ -56,7 +56,13 @@ unsigned long get_board_ddr_clk(void);
#endif
#ifdef CONFIG_SD_BOOT
-#define CONFIG_SYS_FSL_PBL_RCW board/freescale/ls1021aqds/ls102xa_rcw_sd.cfg
+#ifdef CONFIG_SD_BOOT_QSPI
+#define CONFIG_SYS_FSL_PBL_RCW \
+ board/freescale/ls1021aqds/ls102xa_rcw_sd_qspi.cfg
+#else
+#define CONFIG_SYS_FSL_PBL_RCW \
+ board/freescale/ls1021aqds/ls102xa_rcw_sd_ifc.cfg
+#endif
#define CONFIG_SPL_FRAMEWORK
#define CONFIG_SPL_LDSCRIPT "arch/$(ARCH)/cpu/u-boot-spl.lds"
#define CONFIG_SPL_LIBCOMMON_SUPPORT
@@ -87,6 +93,9 @@ unsigned long get_board_ddr_clk(void);
#ifdef CONFIG_QSPI_BOOT
#define CONFIG_SYS_TEXT_BASE 0x40010000
+#endif
+
+#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
#define CONFIG_SYS_NO_FLASH
#endif
@@ -162,7 +171,7 @@ unsigned long get_board_ddr_clk(void);
/*
* IFC Definitions
*/
-#ifndef CONFIG_QSPI_BOOT
+#if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI)
#define CONFIG_FSL_IFC
#define CONFIG_SYS_FLASH_BASE 0x60000000
#define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE
@@ -375,7 +384,9 @@ unsigned long get_board_ddr_clk(void);
#else
#define CONFIG_CONS_INDEX 1
#define CONFIG_SYS_NS16550_SERIAL
+#ifndef CONFIG_DM_SERIAL
#define CONFIG_SYS_NS16550_REG_SIZE 1
+#endif
#define CONFIG_SYS_NS16550_CLK get_serial_clock()
#endif
@@ -410,7 +421,7 @@ unsigned long get_board_ddr_clk(void);
#define CONFIG_DOS_PARTITION
/* SPI */
-#ifdef CONFIG_QSPI_BOOT
+#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
/* QSPI */
#define QSPI0_AMBA_BASE 0x40000000
#define FSL_QSPI_FLASH_SIZE (1 << 24)
@@ -555,6 +566,10 @@ unsigned long get_board_ddr_clk(void);
#define CONFIG_CMDLINE_TAG
#define CONFIG_CMDLINE_EDITING
+#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
+#undef CONFIG_CMD_IMLS
+#endif
+
#define CONFIG_ARMV7_NONSEC
#define CONFIG_ARMV7_VIRT
#define CONFIG_PEN_ADDR_BIG_ENDIAN
diff --git a/include/configs/ls1043aqds.h b/include/configs/ls1043aqds.h
index 4ab8e13ba1..158cf02763 100644
--- a/include/configs/ls1043aqds.h
+++ b/include/configs/ls1043aqds.h
@@ -379,6 +379,19 @@ unsigned long get_board_ddr_clk(void);
#endif
#endif
+/* USB */
+#define CONFIG_HAS_FSL_XHCI_USB
+#ifdef CONFIG_HAS_FSL_XHCI_USB
+#define CONFIG_USB_XHCI
+#define CONFIG_USB_XHCI_FSL
+#define CONFIG_USB_XHCI_DWC3
+#define CONFIG_USB_MAX_CONTROLLER_COUNT 3
+#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2
+#define CONFIG_CMD_USB
+#define CONFIG_USB_STORAGE
+#define CONFIG_CMD_EXT2
+#endif
+
/*
* Miscellaneous configurable options
*/
diff --git a/include/configs/ls1043ardb.h b/include/configs/ls1043ardb.h
index 506f50d895..bc40b06a89 100644
--- a/include/configs/ls1043ardb.h
+++ b/include/configs/ls1043ardb.h
@@ -268,6 +268,13 @@
#define CONFIG_ETHPRIME "FM1@DTSEC3"
#endif
+/* QE */
+#if !defined(CONFIG_SD_BOOT) && !defined(CONFIG_NAND_BOOT) && \
+ !defined(CONFIG_QSPI_BOOT)
+#define CONFIG_U_QE
+#endif
+#define CONFIG_SYS_QE_FW_ADDR 0x60600000
+
/* USB */
#define CONFIG_HAS_FSL_XHCI_USB
#ifdef CONFIG_HAS_FSL_XHCI_USB
diff --git a/include/configs/ls2080a_common.h b/include/configs/ls2080a_common.h
index def0a6f3f0..64b82e8388 100644
--- a/include/configs/ls2080a_common.h
+++ b/include/configs/ls2080a_common.h
@@ -264,14 +264,17 @@ unsigned long long get_qixis_addr(void);
"kernel_start=0x581200000\0" \
"kernel_load=0xa0000000\0" \
"kernel_size=0x2800000\0" \
- "console=ttyAMA0,38400n8\0"
+ "console=ttyAMA0,38400n8\0" \
+ "mcinitcmd=fsl_mc start mc 0x580300000" \
+ " 0x580800000 \0"
#define CONFIG_BOOTARGS "console=ttyS0,115200 root=/dev/ram0 " \
"earlycon=uart8250,mmio,0x21c0500" \
"ramdisk_size=0x2000000 default_hugepagesz=2m" \
- " hugepagesz=2m hugepages=16"
-#define CONFIG_BOOTCOMMAND "cp.b $kernel_start $kernel_load " \
- "$kernel_size && bootm $kernel_load"
+ " hugepagesz=2m hugepages=256"
+#define CONFIG_BOOTCOMMAND "fsl_mc apply dpl 0x580700000 &&" \
+ " cp.b $kernel_start $kernel_load" \
+ " $kernel_size && bootm $kernel_load"
#define CONFIG_BOOTDELAY 10
/* Monitor Command Prompt */
diff --git a/include/configs/ls2080aqds.h b/include/configs/ls2080aqds.h
index a402c06a3b..dab38208f5 100644
--- a/include/configs/ls2080aqds.h
+++ b/include/configs/ls2080aqds.h
@@ -346,7 +346,9 @@ unsigned long get_board_ddr_clk(void);
"initrd_high=0xffffffffffffffff\0" \
"kernel_start=0x581100000\0" \
"kernel_load=0xa0000000\0" \
- "kernel_size=0x2800000\0"
+ "kernel_size=0x2800000\0" \
+ "mcinitcmd=fsl_mc start mc 0x580300000" \
+ " 0x580800000 \0"
#ifdef CONFIG_FSL_MC_ENET
#define CONFIG_FSL_MEMAC
diff --git a/include/configs/ls2080ardb.h b/include/configs/ls2080ardb.h
index 116dbcde5b..b2c0181132 100644
--- a/include/configs/ls2080ardb.h
+++ b/include/configs/ls2080ardb.h
@@ -327,13 +327,15 @@ unsigned long get_board_sys_clk(void);
"initrd_high=0xffffffffffffffff\0" \
"kernel_start=0x581100000\0" \
"kernel_load=0xa0000000\0" \
- "kernel_size=0x2800000\0"
+ "kernel_size=0x2800000\0" \
+ "mcinitcmd=fsl_mc start mc 0x580300000" \
+ " 0x580800000 \0"
#undef CONFIG_BOOTARGS
#define CONFIG_BOOTARGS "console=ttyS1,115200 root=/dev/ram0 " \
"earlycon=uart8250,mmio,0x21c0600" \
"ramdisk_size=0x2000000 default_hugepagesz=2m" \
- " hugepagesz=2m hugepages=16"
+ " hugepagesz=2m hugepages=256"
/* MAC/PHY configuration */
#ifdef CONFIG_FSL_MC_ENET
diff --git a/include/configs/odroid_xu3.h b/include/configs/odroid_xu3.h
index 648e48bcf4..500f0f9d4f 100644
--- a/include/configs/odroid_xu3.h
+++ b/include/configs/odroid_xu3.h
@@ -69,6 +69,7 @@
#define CONFIG_CMD_DFU
#define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_32M
#define DFU_DEFAULT_POLL_TIMEOUT 300
+#define DFU_MANIFEST_POLL_TIMEOUT 25000
/* THOR */
#define CONFIG_G_DNL_THOR_VENDOR_NUM CONFIG_G_DNL_VENDOR_NUM
diff --git a/include/configs/omap3_logic.h b/include/configs/omap3_logic.h
index fba2a1256b..0fc9d1c4e1 100644
--- a/include/configs/omap3_logic.h
+++ b/include/configs/omap3_logic.h
@@ -40,7 +40,7 @@
#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO
-
+#define CONFIG_BOARD_LATE_INIT
#define CONFIG_MISC_INIT_R /* misc_init_r dumps the die id */
#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
#define CONFIG_SETUP_MEMORY_TAGS
diff --git a/include/configs/rpi-common.h b/include/configs/rpi-common.h
index 97e5d2c795..e07fa6566e 100644
--- a/include/configs/rpi-common.h
+++ b/include/configs/rpi-common.h
@@ -68,6 +68,7 @@
#define CONFIG_FB_ADDR 0
#define CONFIG_VIDEO_BCM2835
#define CONFIG_SYS_WHITE_ON_BLACK
+#define CONFIG_CONSOLE_SCROLL_LINES 10
/* SD/MMC configuration */
#define CONFIG_GENERIC_MMC
diff --git a/include/configs/socfpga_common.h b/include/configs/socfpga_common.h
index 8de0ab9046..0501bd110a 100644
--- a/include/configs/socfpga_common.h
+++ b/include/configs/socfpga_common.h
@@ -30,6 +30,9 @@
#define CONFIG_TIMESTAMP /* Print image info with timestamp */
+/* add target to build it automatically upon "make" */
+#define CONFIG_BUILD_TARGET "u-boot-with-spl.sfp"
+
/*
* Memory configurations
*/
diff --git a/include/configs/stm32f746-disco.h b/include/configs/stm32f746-disco.h
new file mode 100644
index 0000000000..e1b8bcb084
--- /dev/null
+++ b/include/configs/stm32f746-disco.h
@@ -0,0 +1,89 @@
+/*
+ * (C) Copyright 2016
+ * Vikas Manocha, <vikas.manocha@st.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#define CONFIG_SYS_THUMB_BUILD
+#define CONFIG_SYS_NO_FLASH
+
+#define CONFIG_OF_LIBFDT
+#define CONFIG_BOARD_EARLY_INIT_F
+
+#define CONFIG_SYS_FLASH_BASE 0x08000000
+#define CONFIG_SYS_INIT_SP_ADDR 0x20050000
+#define CONFIG_SYS_TEXT_BASE 0x08000000
+
+#define CONFIG_SYS_ICACHE_OFF
+#define CONFIG_SYS_DCACHE_OFF
+
+/*
+ * Configuration of the external SDRAM memory
+ */
+#define CONFIG_NR_DRAM_BANKS 1
+#define CONFIG_SYS_RAM_SIZE ((64 + 192) << 10)
+#define CONFIG_SYS_RAM_CS 1
+#define CONFIG_SYS_RAM_FREQ_DIV 2
+#define CONFIG_SYS_RAM_BASE 0x20000000
+#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_RAM_BASE
+#define CONFIG_SYS_LOAD_ADDR 0x20000000
+#define CONFIG_LOADADDR 0x20000000
+
+#define CONFIG_SYS_MAX_FLASH_SECT 12
+#define CONFIG_SYS_MAX_FLASH_BANKS 2
+
+#ifndef CONFIG_SYS_NO_FLASH
+#define CONFIG_ENV_IS_IN_FLASH
+#else
+#define CONFIG_ENV_IS_NOWHERE
+#endif
+#define CONFIG_ENV_SIZE (8 << 10)
+
+#define CONFIG_STM32_GPIO
+#define CONFIG_STM32X7_SERIAL
+
+#define CONFIG_SYS_CLK_FREQ 16*1000*1000 /* 180 MHz */
+#define CONFIG_SYS_HZ_CLOCK 1000000 /* Timer is clocked at 1MHz */
+
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_INITRD_TAG
+#define CONFIG_REVISION_TAG
+
+#define CONFIG_SYS_CBSIZE 1024
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \
+ + sizeof(CONFIG_SYS_PROMPT) + 16)
+
+#define CONFIG_SYS_MAXARGS 16
+#define CONFIG_SYS_MALLOC_LEN (16 * 1024)
+#define CONFIG_STACKSIZE (64 << 10)
+
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_BOOTARGS \
+ "console=ttyS0,115200 earlyprintk consoleblank=0 ignore_loglevel"
+#define CONFIG_BOOTCOMMAND \
+ "run bootcmd_romfs"
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "bootargs_romfs=uclinux.physaddr=0x08180000 root=/dev/mtdblock0\0" \
+ "bootcmd_romfs=setenv bootargs ${bootargs} ${bootargs_romfs};" \
+ "bootm 0x08044000 - 0x08042000\0"
+
+#define CONFIG_BOOTDELAY 3
+
+/*
+ * Command line configuration.
+ */
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_AUTO_COMPLETE
+#define CONFIG_CMDLINE_EDITING
+
+#define CONFIG_CMD_MEM
+#define CONFIG_CMD_TIMER
+#undef CONFIG_CMD_IMLS
+#endif /* __CONFIG_H */
diff --git a/include/configs/tseries.h b/include/configs/tseries.h
index 93e34544cb..43cf9658f3 100644
--- a/include/configs/tseries.h
+++ b/include/configs/tseries.h
@@ -12,6 +12,7 @@
#ifndef __CONFIG_TSERIES_H__
#define __CONFIG_TSERIES_H__
+#include <configs/bur_cfg_common.h>
#include <configs/bur_am335x_common.h>
/* ------------------------------------------------------------------------- */
#define CONFIG_AM335X_LCD
@@ -30,6 +31,10 @@
#define CONFIG_SYS_BOOTCOUNT_ADDR 0x44E3E000
#define CONFIG_BOOTCOUNT_LIMIT
#define CONFIG_BOOTCOUNT_AM33XX
+
+/* memory */
+#define CONFIG_SYS_MALLOC_LEN (5 * 1024 * 1024)
+
/* Clock Defines */
#define V_OSCK 26000000 /* Clock output from T2 */
#define V_SCLK (V_OSCK)
@@ -204,7 +209,6 @@ MMCARGS
#define CONFIG_SYS_MAX_NAND_DEVICE 1
#define CONFIG_SYS_NAND_BASE 0x8000000
#define CONFIG_NAND_OMAP_GPMC
-#define CONFIG_CMD_NAND
/* don't change OMAP_ELM, ECCSCHEME. ROM code only supports this */
#define CONFIG_NAND_OMAP_ELM
#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW
@@ -249,23 +253,15 @@ MMCARGS
#define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT
/* attention! not only for gadget, enables also highspeed in hostmode */
#define CONFIG_USB_GADGET_DUALSPEED
-#define CONFIG_USB_MUSB_HOST
#define CONFIG_AM335X_USB0
#define CONFIG_AM335X_USB0_MODE MUSB_HOST
#define CONFIG_AM335X_USB1
#define CONFIG_AM335X_USB1_MODE MUSB_HOST
-#ifdef CONFIG_USB_MUSB_HOST
-#define CONFIG_CMD_USB
-#define CONFIG_USB_STORAGE
-#endif /* CONFIG_USB_MUSB_HOST */
-
#if defined(CONFIG_SPI_BOOT)
/* McSPI IP block */
#define CONFIG_SPI
#define CONFIG_OMAP3_SPI
-#define CONFIG_CMD_SPI
-#define CONFIG_CMD_SF
#define CONFIG_SF_DEFAULT_SPEED 24000000
#define CONFIG_SPL_SPI_SUPPORT
generated by cgit (git 2.34.1) at 2025-01-13 21:54:12 +0000