diff options
Diffstat (limited to 'include/configs')
28 files changed, 0 insertions, 7791 deletions
diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h deleted file mode 100644 index 2ba6b089cc..0000000000 --- a/include/configs/TQM5200.h +++ /dev/null @@ -1,623 +0,0 @@ -/* - * (C) Copyright 2003-2014 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * (C) Copyright 2004-2006 - * Martin Krause, TQ-Systems GmbH, martin.krause@tqs.de - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ - -#define CONFIG_MPC5200 1 /* This is an MPC5200 CPU */ -#define CONFIG_TQM5200 1 /* ... on TQM5200 module */ -#undef CONFIG_TQM5200_REV100 /* define for revision 100 modules */ - -/* - * Valid values for CONFIG_SYS_TEXT_BASE are: - * 0xFC000000 boot low (standard configuration with room for - * max 64 MByte Flash ROM) - * 0xFFF00000 boot high (for a backup copy of U-Boot) - * 0x00100000 boot from RAM (for testing only) - */ -#ifndef CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_TEXT_BASE 0xFC000000 -#endif - -/* On a Cameron or on a FO300 board or ... */ -#if !defined(CONFIG_CAM5200) && !defined(CONFIG_CHARON) \ - && !defined(CONFIG_FO300) -#define CONFIG_STK52XX 1 /* ... on a STK52XX board */ -#endif - -#define CONFIG_SYS_MPC5XXX_CLKIN 33000000 /* ... running at 33.000000MHz */ - -#define CONFIG_HIGH_BATS 1 /* High BATs supported */ - -/* - * Serial console configuration - */ -#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } -#define CONFIG_BOOTCOUNT_LIMIT 1 - -#ifdef CONFIG_FO300 -#define CONFIG_SYS_DEVICE_NULLDEV 1 /* enable null device */ -#define CONFIG_USB_BIN_FIXUP 1 /* for a buggy USB device */ -#if 0 -#define FO300_SILENT_CONSOLE_WHEN_S1_CLOSED 1 /* silent console on PSC1 when S1 */ - /* switch is closed */ -#endif - -#undef FO300_SILENT_CONSOLE_WHEN_S1_CLOSED /* silent console on PSC1 when S1 */ - /* switch is open */ -#endif /* CONFIG_FO300 */ - -#if defined(CONFIG_CHARON) || defined(CONFIG_STK52XX) -#define CONFIG_PS2KBD /* AT-PS/2 Keyboard */ -#define CONFIG_PS2MULT /* .. on PS/2 Multiplexer */ -#define CONFIG_PS2SERIAL 6 /* .. on PSC6 */ -#define CONFIG_PS2MULT_DELAY (CONFIG_SYS_HZ/2) /* Initial delay */ -#define CONFIG_BOARD_EARLY_INIT_R -#endif /* CONFIG_STK52XX */ - -/* - * PCI Mapping: - * 0x40000000 - 0x4fffffff - PCI Memory - * 0x50000000 - 0x50ffffff - PCI IO Space - */ -#if defined(CONFIG_CHARON) || defined(CONFIG_STK52XX) -/* #define CONFIG_PCI_SCAN_SHOW 1 */ - -#define CONFIG_PCI_MEM_BUS 0x40000000 -#define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS -#define CONFIG_PCI_MEM_SIZE 0x10000000 - -#define CONFIG_PCI_IO_BUS 0x50000000 -#define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS -#define CONFIG_PCI_IO_SIZE 0x01000000 - -#define CONFIG_EEPRO100 1 -#define CONFIG_SYS_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */ -#define CONFIG_NS8382X 1 -#endif /* CONFIG_STK52XX */ - -/* - * Video console - */ -#ifndef CONFIG_TQM5200S /* No graphics controller on TQM5200S */ -#define CONFIG_VIDEO_SM501 -#define CONFIG_VIDEO_SM501_32BPP -#define CONFIG_VIDEO_LOGO - -#ifndef CONFIG_FO300 -#else -#define CONFIG_VIDEO_BMP_LOGO -#endif - -#define CONFIG_SPLASH_SCREEN -#endif /* #ifndef CONFIG_TQM5200S */ - -/* Partitions */ - -/* USB */ -#if defined(CONFIG_CHARON) || defined(CONFIG_FO300) || \ - defined(CONFIG_STK52XX) -#define CONFIG_USB_OHCI_NEW -#define CONFIG_SYS_OHCI_BE_CONTROLLER - -#undef CONFIG_SYS_USB_OHCI_BOARD_INIT -#define CONFIG_SYS_USB_OHCI_CPU_INIT -#define CONFIG_SYS_USB_OHCI_REGS_BASE MPC5XXX_USB -#define CONFIG_SYS_USB_OHCI_SLOT_NAME "mpc5200" -#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 15 - -#endif - -#ifndef CONFIG_CAM5200 -/* POST support */ -#define CONFIG_POST (CONFIG_SYS_POST_MEMORY | \ - CONFIG_SYS_POST_CPU) -#endif - -#ifdef CONFIG_POST -/* preserve space for the post_word at end of on-chip SRAM */ -#define MPC5XXX_SRAM_POST_SIZE MPC5XXX_SRAM_SIZE-4 -#endif - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - -/* - * Command line configuration. - */ -#define CONFIG_CMD_REGINFO - -#ifdef CONFIG_PCI -#define CONFIG_CMD_PCI -#define CONFIG_PCIAUTO_SKIP_HOST_BRIDGE 1 -#endif - -#if defined(CONFIG_CHARON) || defined(CONFIG_FO300) || \ - defined(CONFIG_MINIFAP) || defined(CONFIG_STK52XX) -#endif - -#if defined(CONFIG_CHARON) || defined(CONFIG_FO300) || \ - defined(CONFIG_STK52XX) - #define CONFIG_CFG_USB - #define CONFIG_CFG_FAT -#endif - -#define CONFIG_TIMESTAMP /* display image timestamps */ - -#if (CONFIG_SYS_TEXT_BASE != 0xFFF00000) -# define CONFIG_SYS_LOWBOOT 1 /* Boot low */ -#endif - -/* - * Autobooting - */ - -#define CONFIG_PREBOOT "echo;" \ - "echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \ - "echo" - -#undef CONFIG_BOOTARGS - -#if defined(CONFIG_TQM5200_B) && !defined(CONFIG_SYS_LOWBOOT) -# define ENV_UPDT \ - "update=protect off FFF00000 +${filesize};" \ - "erase FFF00000 +${filesize};" \ - "cp.b 200000 FFF00000 ${filesize};" \ - "protect on FFF00000 +${filesize}\0" -#else /* default lowboot configuration */ -# define ENV_UPDT \ - "update=protect off FC000000 +${filesize};" \ - "erase FC000000 +${filesize};" \ - "cp.b 200000 FC000000 ${filesize};" \ - "protect on FC000000 +${filesize}\0" -#endif - -#if defined(CONFIG_TQM5200) -#define CUSTOM_ENV_SETTINGS \ - "hostname=tqm5200\0" \ - "bootfile=/tftpboot/tqm5200/uImage\0" \ - "fdt_file=/tftpboot/tqm5200/tqm5200.dtb\0" \ - "u-boot=/tftpboot/tqm5200/u-boot.bin\0" -#elif defined(CONFIG_CAM5200) -#define CUSTOM_ENV_SETTINGS \ - "bootfile=cam5200/uImage\0" \ - "u-boot=cam5200/u-boot.bin\0" \ - "setup=tftp 200000 cam5200/setup.img; source 200000\0" -#endif - -#if defined(CONFIG_TQM5200_B) -#define ENV_FLASH_LAYOUT \ - "fdt_addr=FC100000\0" \ - "kernel_addr=FC140000\0" \ - "ramdisk_addr=FC600000\0" -#elif defined(CONFIG_CHARON) -#define ENV_FLASH_LAYOUT \ - "fdt_addr=FDFC0000\0" \ - "kernel_addr=FC0A0000\0" \ - "ramdisk_addr=FC200000\0" -#else /* !CONFIG_TQM5200_B */ -#define ENV_FLASH_LAYOUT \ - "fdt_addr=FC0A0000\0" \ - "kernel_addr=FC0C0000\0" \ - "ramdisk_addr=FC300000\0" -#endif - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "netdev=eth0\0" \ - "console=ttyPSC0\0" \ - ENV_FLASH_LAYOUT \ - "kernel_addr_r=400000\0" \ - "fdt_addr_r=600000\0" \ - "rootpath=/opt/eldk/ppc_6xx\0" \ - "ramargs=setenv bootargs root=/dev/ram rw\0" \ - "nfsargs=setenv bootargs root=/dev/nfs rw " \ - "nfsroot=${serverip}:${rootpath}\0" \ - "addip=setenv bootargs ${bootargs} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ - ":${hostname}:${netdev}:off panic=1\0" \ - "addcons=setenv bootargs ${bootargs} " \ - "console=${console},${baudrate}\0" \ - "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \ - "flash_self_old=sete console ttyS0; " \ - "run ramargs addip addcons addmtd; " \ - "bootm ${kernel_addr} ${ramdisk_addr}\0" \ - "flash_self=run ramargs addip addcons;" \ - "bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \ - "flash_nfs_old=sete console ttyS0; run nfsargs addip addcons;" \ - "bootm ${kernel_addr}\0" \ - "flash_nfs=run nfsargs addip addcons;" \ - "bootm ${kernel_addr} - ${fdt_addr}\0" \ - "net_nfs_old=tftp ${kernel_addr_r} ${bootfile};" \ - "sete console ttyS0; run nfsargs addip addcons;bootm\0" \ - "net_nfs=tftp ${kernel_addr_r} ${bootfile}; " \ - "tftp ${fdt_addr_r} ${fdt_file}; " \ - "run nfsargs addip addcons addmtd; " \ - "bootm ${kernel_addr_r} - ${fdt_addr_r}\0" \ - CUSTOM_ENV_SETTINGS \ - "load=tftp 200000 ${u-boot}\0" \ - ENV_UPDT \ - "" - -#define CONFIG_BOOTCOMMAND "run net_nfs" - -/* - * IPB Bus clocking configuration. - */ -#define CONFIG_SYS_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */ - -#if defined(CONFIG_SYS_IPBCLK_EQUALS_XLBCLK) && !defined(CONFIG_CAM5200) -/* - * PCI Bus clocking configuration - * - * Actually a PCI Clock of 66 MHz is only set (in cpu_init.c) if - * CONFIG_SYS_IPBCLK_EQUALS_XLBCLK is defined. This is because a PCI Clock of - * 66 MHz yet hasn't been tested with a IPB Bus Clock of 66 MHz. - */ -#define CONFIG_SYS_PCICLK_EQUALS_IPBCLK_DIV2 /* define for 66MHz speed */ -#endif - -/* - * Flash configuration - */ -#define CONFIG_SYS_FLASH_BASE 0xFC000000 - -#if defined(CONFIG_CAM5200) && defined(CONFIG_CAM5200_NIOSFLASH) -#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max num of flash banks - (= chip selects) */ -#define CONFIG_SYS_FLASH_WORD_SIZE unsigned int /* main flash device with */ -#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ - -#define CONFIG_SYS_FLASH_ADDR0 0x555 -#define CONFIG_SYS_FLASH_ADDR1 0x2AA -#define CONFIG_SYS_FLASH_2ND_16BIT_DEV 1 /* NIOS flash is a 16bit device */ -#define CONFIG_SYS_MAX_FLASH_SECT 128 -#else -/* use CFI flash driver */ -#define CONFIG_SYS_FLASH_CFI 1 /* Flash is CFI conformant */ -#define CONFIG_FLASH_CFI_DRIVER 1 /* Use the common driver */ -#define CONFIG_FLASH_CFI_MTD /* with MTD support */ -#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_BOOTCS_START } -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of flash banks - (= chip selects) */ -#define CONFIG_SYS_MAX_FLASH_SECT 512 /* max num of sects on one chip */ -#endif - -#define CONFIG_SYS_FLASH_EMPTY_INFO -#define CONFIG_SYS_FLASH_SIZE 0x04000000 /* 64 MByte */ -#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 - -#if defined (CONFIG_CAM5200) -# define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x00040000) -#elif defined(CONFIG_TQM5200_B) -# define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x00080000) -#else -# define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x00060000) -#endif - -/* Dynamic MTD partition support */ -#define CONFIG_CMD_MTDPARTS -#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ -#define MTDIDS_DEFAULT "nor0=fc000000.flash" - -#if defined(CONFIG_STK52XX) -# if defined(CONFIG_TQM5200_B) -# if defined(CONFIG_SYS_LOWBOOT) -# define MTDPARTS_DEFAULT "mtdparts=fc000000.flash:1m(firmware)," \ - "256k(dtb)," \ - "2304k(kernel)," \ - "2560k(small-fs)," \ - "2m(initrd)," \ - "8m(misc)," \ - "16m(big-fs)" -# else /* highboot */ -# define MTDPARTS_DEFAULT "mtdparts=fc000000.flash:2560k(kernel),"\ - "3584k(small-fs)," \ - "2m(initrd)," \ - "8m(misc)," \ - "15m(big-fs)," \ - "1m(firmware)" -# endif /* CONFIG_SYS_LOWBOOT */ -# else /* !CONFIG_TQM5200_B */ -# define MTDPARTS_DEFAULT "mtdparts=fc000000.flash:640k(firmware),"\ - "128k(dtb)," \ - "2304k(kernel)," \ - "2m(initrd)," \ - "4m(small-fs)," \ - "8m(misc)," \ - "15m(big-fs)" -# endif /* CONFIG_TQM5200_B */ -#elif defined (CONFIG_CAM5200) -# define MTDPARTS_DEFAULT "mtdparts=fc000000.flash:768k(firmware),"\ - "1792k(kernel)," \ - "5632k(rootfs)," \ - "24m(home)" -#elif defined (CONFIG_CHARON) -# define MTDPARTS_DEFAULT "mtdparts=fc000000.flash:640k(firmware),"\ - "1408k(kernel)," \ - "2m(initrd)," \ - "4m(small-fs)," \ - "24320k(big-fs)," \ - "256k(dts)" -#elif defined (CONFIG_FO300) -# define MTDPARTS_DEFAULT "mtdparts=fc000000.flash:640k(firmware),"\ - "1408k(kernel)," \ - "2m(initrd)," \ - "4m(small-fs)," \ - "8m(misc)," \ - "16m(big-fs)" -#else -# error "Unknown Carrier Board" -#endif /* CONFIG_STK52XX */ - -/* - * Environment settings - */ -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_SIZE 0x4000 /* 16 k - keep small for fast booting */ -#if defined(CONFIG_TQM5200_B) || defined (CONFIG_CAM5200) -#define CONFIG_ENV_SECT_SIZE 0x40000 -#else -#define CONFIG_ENV_SECT_SIZE 0x20000 -#endif /* CONFIG_TQM5200_B */ -#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) - -/* - * Memory map - */ -#define CONFIG_SYS_MBAR 0xF0000000 -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_DEFAULT_MBAR 0x80000000 - -/* Use ON-Chip SRAM until RAM will be available */ -#define CONFIG_SYS_INIT_RAM_ADDR MPC5XXX_SRAM -#ifdef CONFIG_POST -/* preserve space for the post_word at end of on-chip SRAM */ -#define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_POST_SIZE -#else -#define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_SIZE -#endif - -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE -#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) -# define CONFIG_SYS_RAMBOOT 1 -#endif - -#if defined (CONFIG_CAM5200) -# define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ -#elif defined(CONFIG_TQM5200_B) -# define CONFIG_SYS_MONITOR_LEN (512 << 10) /* Reserve 512 kB for Monitor */ -#else -# define CONFIG_SYS_MONITOR_LEN (384 << 10) /* Reserve 384 kB for Monitor */ -#endif - -#define CONFIG_SYS_MALLOC_LEN (1024 << 10) /* Reserve 1024 kB for malloc() */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ - -/* - * Ethernet configuration - */ -#define CONFIG_MPC5xxx_FEC 1 -#define CONFIG_MPC5xxx_FEC_MII100 -/* - * Define CONFIG_MPC5xxx_FEC_MII10 to force FEC at 10Mb - */ -/* #define CONFIG_MPC5xxx_FEC_MII10 */ -#define CONFIG_PHY_ADDR 0x00 - -/* - * GPIO configuration - * - * use CS1: Bit 0 (mask: 0x80000000): - * 1 -> Pin gpio_wkup_6 as second SDRAM chip select (mem_cs1). - * use ALT CAN position: Bits 2-3 (mask: 0x30000000): - * 00 -> No Alternatives, CAN1/2 on PSC2 according to PSC2 setting. - * SPI on PSC3 according to PSC3 setting. Use for CAM5200. - * 01 -> CAN1 on I2C1, CAN2 on Tmr0/1. - * Use for REV200 STK52XX boards and FO300 boards. Do not use - * with REV100 modules (because, there I2C1 is used as I2C bus). - * use ATA: Bits 6-7 (mask 0x03000000): - * 00 -> No ATA chip selects, csb_4/5 used as normal chip selects. - * Use for CAM5200 board. - * 01 -> ATA cs0/1 on csb_4/5. Use for the remaining boards. - * use PSC6: Bits 9-11 (mask 0x00700000): - * 000 -> use PSC6_0 to PSC6_3 as GPIO, PSC6 could not be used as - * UART, CODEC or IrDA. - * GPIO on PSC6_3 is used in post_hotkeys_pressed() to - * enable extended POST tests. - * Use for MINI-FAP and TQM5200_IB boards. - * 101 -> use PSC6 as UART. Pins PSC6_0 to PSC6_3 are used. - * Extended POST test is not available. - * Use for STK52xx, FO300 and CAM5200 boards. - * WARNING: When the extended POST is enabled, these bits will - * be overridden by this code as GPIOs! - * use PCI_DIS: Bit 16 (mask 0x00008000): - * 1 -> disable PCI controller (on CAM5200 board). - * use USB: Bits 18-19 (mask 0x00003000): - * 10 -> two UARTs (on FO300 and CAM5200). - * use PSC3: Bits 20-23 (mask: 0x00000f00): - * 0000 -> All PSC3 pins are GPIOs. - * 1100 -> UART/SPI (on FO300 board). - * 0100 -> UART (on CAM5200 board). - * use PSC2: Bits 25:27 (mask: 0x00000030): - * 000 -> All PSC2 pins are GPIOs. - * 100 -> UART (on CAM5200 board). - * 001 -> CAN1/2 on PSC2 pins. - * Use for REV100 STK52xx boards - * 01x -> Use AC97 (on FO300 board). - * use PSC1: Bits 29-31 (mask: 0x00000007): - * 100 -> UART (on all boards). - */ -#if !defined(CONFIG_SYS_GPS_PORT_CONFIG) -#if defined (CONFIG_MINIFAP) -# define CONFIG_SYS_GPS_PORT_CONFIG 0x91000004 -#elif defined (CONFIG_STK52XX) -# if defined (CONFIG_STK52XX_REV100) -# define CONFIG_SYS_GPS_PORT_CONFIG 0x81500014 -# else /* STK52xx REV200 and above */ -# if defined (CONFIG_TQM5200_REV100) -# error TQM5200 REV100 not supported on STK52XX REV200 or above -# else/* TQM5200 REV200 and above */ -# define CONFIG_SYS_GPS_PORT_CONFIG 0x91500404 -# endif -# endif -#elif defined (CONFIG_FO300) -# define CONFIG_SYS_GPS_PORT_CONFIG 0x91502c24 -#elif defined (CONFIG_CAM5200) -# define CONFIG_SYS_GPS_PORT_CONFIG 0x8050A444 -#else /* TMQ5200 Inbetriebnahme-Board */ -# define CONFIG_SYS_GPS_PORT_CONFIG 0x81000004 -#endif -#endif - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ - -#define CONFIG_CMDLINE_EDITING 1 /* add command line history */ - -#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -/* Enable an alternate, more extensive memory test */ -#define CONFIG_SYS_ALT_MEMTEST - -#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ - -/* - * Various low-level settings - */ -#define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI -#define CONFIG_SYS_HID0_FINAL HID0_ICE - -#define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE -#ifdef CONFIG_SYS_PCICLK_EQUALS_IPBCLK_DIV2 -#define CONFIG_SYS_BOOTCS_CFG 0x0008DF30 /* for pci_clk = 66 MHz */ -#else -#define CONFIG_SYS_BOOTCS_CFG 0x0004DF30 /* for pci_clk = 33 MHz */ -#endif -#define CONFIG_SYS_CS0_START CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_CS0_SIZE CONFIG_SYS_FLASH_SIZE - -#define CONFIG_LAST_STAGE_INIT - -/* - * SRAM - Do not map below 2 GB in address space, because this area is used - * for SDRAM autosizing. - */ -#define CONFIG_SYS_CS2_START 0xE5000000 -#define CONFIG_SYS_CS2_SIZE 0x100000 /* 1 MByte */ -#define CONFIG_SYS_CS2_CFG 0x0004D930 - -/* - * Grafic controller - Do not map below 2 GB in address space, because this - * area is used for SDRAM autosizing. - */ -#define SM501_FB_BASE 0xE0000000 -#define CONFIG_SYS_CS1_START (SM501_FB_BASE) -#define CONFIG_SYS_CS1_SIZE 0x4000000 /* 64 MByte */ -#define CONFIG_SYS_CS1_CFG 0x8F48FF70 -#define SM501_MMIO_BASE CONFIG_SYS_CS1_START + 0x03E00000 - -#define CONFIG_SYS_CS_BURST 0x00000000 -#define CONFIG_SYS_CS_DEADCYCLE 0x33333311 /* 1 dead cycle for flash and SM501 */ - -#if defined(CONFIG_CAM5200) -#define CONFIG_SYS_CS4_START 0xB0000000 -#define CONFIG_SYS_CS4_SIZE 0x00010000 -#define CONFIG_SYS_CS4_CFG 0x01019C10 - -#define CONFIG_SYS_CS5_START 0xD0000000 -#define CONFIG_SYS_CS5_SIZE 0x01208000 -#define CONFIG_SYS_CS5_CFG 0x1414BF10 -#endif - -#define CONFIG_SYS_RESET_ADDRESS 0xff000000 - -/*----------------------------------------------------------------------- - * USB stuff - *----------------------------------------------------------------------- - */ -#define CONFIG_USB_CLOCK 0x0001BBBB -#define CONFIG_USB_CONFIG 0x00001000 - -/*----------------------------------------------------------------------- - * IDE/ATA stuff Supports IDE harddisk - *----------------------------------------------------------------------- - */ - -#undef CONFIG_IDE_LED /* LED for ide not supported */ - -#define CONFIG_IDE_RESET /* reset for ide supported */ -#define CONFIG_IDE_PREINIT - -#define CONFIG_SYS_IDE_MAXBUS 1 /* max. 1 IDE bus */ -#define CONFIG_SYS_IDE_MAXDEVICE 2 /* max. 2 drives per IDE bus */ - -#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000 - -#define CONFIG_SYS_ATA_BASE_ADDR MPC5XXX_ATA - -/* Offset for data I/O */ -#define CONFIG_SYS_ATA_DATA_OFFSET (0x0060) - -/* Offset for normal register accesses */ -#define CONFIG_SYS_ATA_REG_OFFSET (CONFIG_SYS_ATA_DATA_OFFSET) - -/* Offset for alternate registers */ -#define CONFIG_SYS_ATA_ALT_OFFSET (0x005C) - -/* Interval between registers */ -#define CONFIG_SYS_ATA_STRIDE 4 - -/* Support ATAPI devices */ -#define CONFIG_ATAPI 1 - -/*----------------------------------------------------------------------- - * Open firmware flat tree support - *----------------------------------------------------------------------- - */ -#define OF_CPU "PowerPC,5200@0" -#define OF_SOC "soc5200@f0000000" -#define OF_TBCLK (bd->bi_busfreq / 4) -#define OF_STDOUT_PATH "/soc5200@f0000000/serial@2000" - -#endif /* __CONFIG_H */ diff --git a/include/configs/a3m071.h b/include/configs/a3m071.h deleted file mode 100644 index 82b9ff471d..0000000000 --- a/include/configs/a3m071.h +++ /dev/null @@ -1,408 +0,0 @@ -/* - * Copyright 2012-2013 Stefan Roese <sr@denx.de> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ - -#define CONFIG_MPC5200 -#define CONFIG_A3M071 /* A3M071 board */ - -#define CONFIG_SYS_TEXT_BASE 0x01000000 /* boot low for 32 MiB boards */ - -#define CONFIG_SPL_TARGET "u-boot-img.bin" - -#define CONFIG_SYS_MPC5XXX_CLKIN 33000000 /* ... running at 33MHz */ - -#define CONFIG_MISC_INIT_R -#define CONFIG_SYS_LOWBOOT /* Enable lowboot */ - -#ifdef CONFIG_A4M2K -#define CONFIG_HOSTNAME a4m2k -#else -#define CONFIG_HOSTNAME a3m071 -#endif - -#define CONFIG_BOOTCOUNT_LIMIT - -/* - * Serial console configuration - */ -#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */ -#define CONFIG_SYS_BAUDRATE_TABLE \ - { 9600, 19200, 38400, 57600, 115200, 230400 } - -/* - * Command line configuration. - */ -#define CONFIG_CMD_REGINFO -#define CONFIG_BOOTP_SEND_HOSTNAME -#define CONFIG_BOOTP_SERVERIP -#define CONFIG_BOOTP_MAY_FAIL -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_SERVERIP -#define CONFIG_NET_RETRY_COUNT 3 -#define CONFIG_NETCONSOLE -#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ -#define CONFIG_MTD_PARTITIONS /* needed for UBI */ -#define CONFIG_FLASH_CFI_MTD -#define MTDIDS_DEFAULT "nor0=fc000000.flash" -#define MTDPARTS_DEFAULT "mtdparts=fc000000.flash:512k(u-boot)," \ - "128k(env1)," \ - "128k(env2)," \ - "128k(hwinfo)," \ - "1M(nvramsim)," \ - "128k(dtb)," \ - "5M(kernel)," \ - "128k(sysinfo)," \ - "7552k(root)," \ - "4M(app)," \ - "5376k(data)," \ - "8M(install)" - -#define CONFIG_LZO /* needed for UBI */ -#define CONFIG_RBTREE /* needed for UBI */ -#define CONFIG_CMD_MTDPARTS -#define CONFIG_CMD_UBIFS - -/* - * IPB Bus clocking configuration. - */ -#define CONFIG_SYS_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */ -/* define for 66MHz speed - undef for 33MHz PCI clock speed */ -#ifdef CONFIG_A4M2K -#define CONFIG_SYS_PCICLK_EQUALS_IPBCLK_DIV2 -#else -#undef CONFIG_SYS_PCICLK_EQUALS_IPBCLK_DIV2 -#endif - -/* maximum size of the flat tree (8K) */ -#define OF_FLAT_TREE_MAX_SIZE 8192 - -#define OF_CPU "PowerPC,5200@0" -#define OF_SOC "soc5200@f0000000" -#define OF_TBCLK (bd->bi_busfreq / 4) -#define OF_STDOUT_PATH "/soc5200@f0000000/serial@2000" - -/* - * NOR flash configuration - */ -#define CONFIG_SYS_FLASH_BASE 0xfc000000 -#define CONFIG_SYS_FLASH_SIZE 0x02000000 -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x80000) - -#define CONFIG_SYS_MAX_FLASH_BANKS 1 -#define CONFIG_SYS_MAX_FLASH_SECT 256 -#define CONFIG_SYS_FLASH_ERASE_TOUT 240000 -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 -#define CONFIG_SYS_FLASH_LOCK_TOUT 5 -#define CONFIG_SYS_FLASH_UNLOCK_TOUT 10000 -#define CONFIG_SYS_FLASH_PROTECTION -#define CONFIG_FLASH_CFI_DRIVER -#define CONFIG_SYS_FLASH_CFI -#define CONFIG_SYS_FLASH_EMPTY_INFO -#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE -#define CONFIG_FLASH_VERIFY - -/* - * Environment settings - */ -#define CONFIG_ENV_IS_IN_FLASH -#define CONFIG_ENV_SIZE 0x10000 -#define CONFIG_ENV_SECT_SIZE 0x20000 -#define CONFIG_ENV_OVERWRITE -#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) - -/* - * Memory map - */ -#define CONFIG_SYS_MBAR 0xf0000000 -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_DEFAULT_MBAR 0x80000000 - -/* Use SRAM until RAM will be available */ -#define CONFIG_SYS_INIT_RAM_ADDR MPC5XXX_SRAM -#define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_SIZE - -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE - -#define CONFIG_SYS_MONITOR_LEN (512 << 10) -#define CONFIG_SYS_MALLOC_LEN (4 << 20) -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) - -/* - * Ethernet configuration - */ -#define CONFIG_MPC5xxx_FEC -#define CONFIG_MPC5xxx_FEC_MII100 -#ifdef CONFIG_A4M2K -#define CONFIG_PHY_ADDR 0x01 -#else -#define CONFIG_PHY_ADDR 0x00 -#endif - -/* - * GPIO configuration - */ - -/* - * GPIO-config depends on failsave-level - * failsave 0 means just MPX-config, no digiboard, no fpga - * 1 means digiboard ok - * 2 means fpga ok - */ - -#ifdef CONFIG_A4M2K -#define CONFIG_SYS_GPS_PORT_CONFIG 0x1005C805 -#else -/* for failsave-level 0 - full failsave */ -#define CONFIG_SYS_GPS_PORT_CONFIG 0x1005C005 -/* for failsave-level 1 - only digiboard ok */ -#define CONFIG_SYS_GPS_PORT_CONFIG_1 0x1005C065 -/* for failsave-level 2 - all ok */ -#define CONFIG_SYS_GPS_PORT_CONFIG_2 0x1005C065 -#endif - -#define CONFIG_WDOG_GPIO_PIN GPIO_WKUP_7 -#if defined(CONFIG_A4M2K) && !defined(CONFIG_SPL_BUILD) -#define CONFIG_HW_WATCHDOG /* Use external HW-Watchdog */ -#endif - -/* - * Configuration matrix - * MSB LSB - * failsave 0 0x1005C005 00010000000001011100000000000101 ( full failsave ) - * failsave 1 0x1005C065 00010000000001011100000001100101 ( digib.-ver ok ) - * failsave 2 0x1005C065 00010000000001011100000001100101 ( all ok ) - * || ||| || | ||| | | | | - * || ||| || | ||| | | | | bit rev name - * ++-+++-++--+---+++-+---+---+---+- 0 31 CS1 - * +-+++-++--+---+++-+---+---+---+- 1 30 LPTZ - * ||| || | ||| | | | | 2 29 ALTs - * +++-++--+---+++-+---+---+---+- 3 28 ALTs - * ++-++--+---+++-+---+---+---+- 4 27 CS7 - * +-++--+---+++-+---+---+---+- 5 26 CS6 - * || | ||| | | | | 6 25 ATA - * ++--+---+++-+---+---+---+- 7 24 ATA - * +--+---+++-+---+---+---+- 8 23 IR_USB_CLK - * | ||| | | | | 9 22 IRDA - * | ||| | | | | 10 21 IRDA - * +---+++-+---+---+---+- 11 20 IRDA - * ||| | | | | 12 19 Ether - * ||| | | | | 13 18 Ether - * ||| | | | | 14 17 Ether - * +++-+---+---+---+- 15 16 Ether - * ++-+---+---+---+- 16 15 PCI_DIS - * +-+---+---+---+- 17 14 USB_SE - * | | | | 18 13 USB - * +---+---+---+- 19 12 USB - * | | | 20 11 PSC3 - * | | | 21 10 PSC3 - * | | | 22 9 PSC3 - * +---+---+- 23 8 PSC3 - * | | 24 7 - - * | | 25 6 PSC2 - * | | 26 5 PSC2 - * +---+- 27 4 PSC2 - * | 28 3 - - * | 29 2 PSC1 - * | 30 1 PSC1 - * +- 31 0 PSC1 - */ - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP - -#define CONFIG_CMDLINE_EDITING - -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 -#else -#define CONFIG_SYS_CBSIZE 256 -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) -#define CONFIG_SYS_MAXARGS 16 -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE - -#define CONFIG_SYS_MEMTEST_START 0x00100000 -#define CONFIG_SYS_MEMTEST_END 0x00f00000 - -#define CONFIG_SYS_LOAD_ADDR 0x00100000 - -/* - * Various low-level settings - */ -#define CONFIG_SYS_HID0_INIT (HID0_ICE | HID0_ICFI) -#define CONFIG_SYS_HID0_FINAL HID0_ICE - -#define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE -#define CONFIG_SYS_CS0_START CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_CS0_SIZE CONFIG_SYS_FLASH_SIZE - -#ifdef CONFIG_A4M2K -/* external MRAM */ -#define CONFIG_SYS_CS1_START 0xf1000000 -#define CONFIG_SYS_CS1_SIZE (512 << 10) /* 512KiB MRAM */ -#endif - -#define CONFIG_SYS_CS2_START 0xe0000000 -#define CONFIG_SYS_CS2_SIZE 0x00100000 - -/* FPGA slave io (512kiB / 1MiB) - see ticket #66 */ -#define CONFIG_SYS_CS3_START 0xE9000000 -#ifdef CONFIG_A4M2K -#define CONFIG_SYS_CS3_SIZE 0x00100000 -#else -#define CONFIG_SYS_CS3_SIZE 0x00080000 -#endif -/* 00000000 00110010 1 0 1 1 10 01 00 00 0 0 0 0 = 0x0032B900 */ -#define CONFIG_SYS_CS3_CFG 0x0032B900 - -#ifndef CONFIG_A4M2K -/* Diagnosis Interface - see ticket #63 */ -#define CONFIG_SYS_CS4_START 0xEA000000 -#define CONFIG_SYS_CS4_SIZE 0x00000001 -/* 00000000 00000010 1 0 1 1 10 01 00 00 0 0 0 0 = 0x0002B900 */ -#define CONFIG_SYS_CS4_CFG 0x0002B900 -#endif - -/* FPGA master io (64kiB / 1MiB) - see ticket #66 */ -#define CONFIG_SYS_CS5_START 0xE8000000 -#ifdef CONFIG_A4M2K -#define CONFIG_SYS_CS5_SIZE 0x00100000 -#else -#define CONFIG_SYS_CS5_SIZE 0x00010000 -#endif -/* 00000000 00110010 1 0 1 1 10 01 00 00 0 0 0 0 = 0x0032B900 */ -#define CONFIG_SYS_CS5_CFG 0x0032B900 - -#ifdef CONFIG_SYS_PCICLK_EQUALS_IPBCLK_DIV2 /* for pci_clk = 66 MHz */ -#define CONFIG_SYS_BOOTCS_CFG 0x0006F900 -#define CONFIG_SYS_CS1_CFG 0x0008FD00 -#define CONFIG_SYS_CS2_CFG 0x0006F90C -#else /* for pci_clk = 33 MHz */ -#define CONFIG_SYS_BOOTCS_CFG 0x0002F900 -#define CONFIG_SYS_CS1_CFG 0x0001FB00 -#define CONFIG_SYS_CS2_CFG 0x0002F90C -#endif - -#define CONFIG_SYS_CS_BURST 0x00000000 -/* set DC for FPGA CS5 and CS3 to 0 - see ticket #66 */ -/* R 7 R 6 R 5 R 4 R 3 R 2 R 1 R 0 */ -/* 00 11 00 11 00 00 00 11 00 00 00 00 00 00 00 00 */ -#define CONFIG_SYS_CS_DEADCYCLE 0x33030000 - -#define CONFIG_SYS_RESET_ADDRESS 0xff000000 - -/* - * Environment Configuration - */ - -#undef CONFIG_BOOTARGS - -#define CONFIG_SYS_AUTOLOAD "n" - -#define CONFIG_PREBOOT "echo;" \ - "echo Type \"run flash_mtd\" to boot from flash with mtd filesystem;" \ - "echo Type \"run net_nfs\" to boot from tftp with nfs filesystem;" \ - "echo" - -#undef CONFIG_BOOTARGS - -#define CONFIG_SYS_FDT_BASE 0xfc1e0000 -#define CONFIG_SYS_FDT_SIZE (16<<10) - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "netdev=eth0\0" \ - "verify=no\0" \ - "loadaddr=200000\0" \ - "kernel_addr=" __stringify(CONFIG_SYS_OS_BASE) "\0" \ - "kernel_addr_r=1000000\0" \ - "fdt_addr=" __stringify(CONFIG_SYS_FDT_BASE) "\0" \ - "fdt_addr_r=1800000\0" \ - "bootfile=" __stringify(CONFIG_HOSTNAME) "/uImage\0" \ - "fdtfile=" __stringify(CONFIG_HOSTNAME) "/" \ - __stringify(CONFIG_HOSTNAME) ".dtb\0" \ - "rootpath=/opt/eldk-5.2.1/powerpc/" \ - "core-image-minimal-mtdutils-dropbear-generic\0" \ - "consoledev=ttyPSC0\0" \ - "nfsargs=setenv bootargs root=/dev/nfs rw " \ - "nfsroot=${serverip}:${rootpath}\0" \ - "ramargs=setenv bootargs root=/dev/ram rw\0" \ - "mtdargs=setenv bootargs root=/dev/mtdblock8 " \ - "rootfstype=squashfs,jffs2\0" \ - "addhost=setenv bootargs ${bootargs} " \ - "hostname=${hostname}\0" \ - "addip=setenv bootargs ${bootargs} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ - ":${hostname}:${netdev}:off panic=1\0" \ - "addtty=setenv bootargs ${bootargs} " \ - "console=${consoledev},${baudrate}\0" \ - "flash_nfs=run nfsargs addip addtty addmtd addhost;" \ - "bootm ${kernel_addr} - ${fdt_addr}\0" \ - "flash_mtd=run mtdargs addip addtty addmtd addhost;" \ - "bootm ${kernel_addr} - ${fdt_addr}\0" \ - "flash_self=run ramargs addip addtty addmtd addhost;" \ - "bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \ - "net_nfs=tftp ${kernel_addr_r} ${bootfile};" \ - "tftp ${fdt_addr_r} ${fdtfile};" \ - "run nfsargs addip addtty addmtd addhost;" \ - "bootm ${kernel_addr_r} - ${fdt_addr_r}\0" \ - "load=tftp ${loadaddr} " __stringify(CONFIG_HOSTNAME) \ - "/u-boot-img.bin\0" \ - "update=protect off fc000000 fc07ffff;" \ - "era fc000000 fc07ffff;" \ - "cp.b ${loadaddr} fc000000 ${filesize}\0" \ - "upd=run load;run update\0" \ - "upd_fdt=tftp 1800000 a3m071/a3m071.dtb;" \ - "run mtdargs addip addtty addmtd addhost;" \ - "fdt addr 1800000;fdt boardsetup;fdt chosen;" \ - "erase fc1e0000 fc1fffff;cp.b 1800000 fc1e0000 20000" \ - "upd_kernel=tftp 1000000 a3m071/uImage-uncompressed;" \ - "erase fc200000 fc6fffff;" \ - "cp.b 1000000 fc200000 ${filesize}" \ - "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \ - "mtdids=" MTDIDS_DEFAULT "\0" \ - "mtdparts=" MTDPARTS_DEFAULT "\0" \ - "" - -#define CONFIG_BOOTCOMMAND "run flash_mtd" - -/* - * SPL related defines - */ -#define CONFIG_SPL_FRAMEWORK -#define CONFIG_SPL_TEXT_BASE 0xfc000000 - -/* Place BSS for SPL near end of SDRAM */ -#define CONFIG_SPL_BSS_START_ADDR ((128 - 1) << 20) -#define CONFIG_SPL_BSS_MAX_SIZE (64 << 10) - -/* Place patched DT blob (fdt) at this address */ -#define CONFIG_SYS_SPL_ARGS_ADDR 0x01800000 - -/* Settings for real U-Boot to be loaded from NOR flash */ -#ifndef __ASSEMBLY__ -extern char __spl_flash_end[]; -#endif -#define CONFIG_SYS_UBOOT_BASE __spl_flash_end -#define CONFIG_SYS_SPL_MAX_LEN (32 << 10) -#define CONFIG_SYS_UBOOT_START 0x1000100 - -#endif /* __CONFIG_H */ diff --git a/include/configs/a4m072.h b/include/configs/a4m072.h deleted file mode 100644 index 5ab063e5ce..0000000000 --- a/include/configs/a4m072.h +++ /dev/null @@ -1,320 +0,0 @@ -/* - * (C) Copyright 2003-2005 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * (C) Copyright 2010 - * Sergei Poselenov, Emcraft Systems, sposelenov@emcraft.com. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ - -#define CONFIG_MPC5200 1 /* This is a MPC5200 CPU */ -#define CONFIG_A4M072 1 /* ... on A4M072 board */ -#define CONFIG_MPC5200_DDR 1 /* ... use DDR RAM */ - -#define CONFIG_SYS_TEXT_BASE 0xFE000000 - -#define CONFIG_MISC_INIT_R - -#define CONFIG_SYS_MPC5XXX_CLKIN 33000000 /* ... running at 33.000000MHz */ - -#define CONFIG_HIGH_BATS 1 /* High BATs supported */ - -/* - * Serial console configuration - */ -#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } -/* define to enable silent console */ -#define CONFIG_SYS_DEVICE_NULLDEV 1 /* include nulldev device */ - -/* - * PCI Mapping: - * 0x40000000 - 0x4fffffff - PCI Memory - * 0x50000000 - 0x50ffffff - PCI IO Space - */ - -#if defined(CONFIG_PCI) -#define CONFIG_PCI_SCAN_SHOW 1 -#define CONFIG_PCIAUTO_SKIP_HOST_BRIDGE 1 - -#define CONFIG_PCI_MEM_BUS 0x40000000 -#define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS -#define CONFIG_PCI_MEM_SIZE 0x10000000 - -#define CONFIG_PCI_IO_BUS 0x50000000 -#define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS -#define CONFIG_PCI_IO_SIZE 0x01000000 -#endif - -#define CONFIG_SYS_XLB_PIPELINING 1 - -#undef CONFIG_EEPRO100 - -/* USB */ -#define CONFIG_USB_OHCI_NEW -#define CONFIG_SYS_OHCI_BE_CONTROLLER -#undef CONFIG_SYS_USB_OHCI_BOARD_INIT -#define CONFIG_SYS_USB_OHCI_CPU_INIT 1 -#define CONFIG_SYS_USB_OHCI_REGS_BASE MPC5XXX_USB -#define CONFIG_SYS_USB_OHCI_SLOT_NAME "mpc5200" -#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 15 - -#define CONFIG_TIMESTAMP /* Print image info with timestamp */ - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - -/* - * Command line configuration. - */ - -#if defined(CONFIG_PCI) -#define CONFIG_CMD_PCI -#endif - -#if (CONFIG_SYS_TEXT_BASE == 0xFE000000) /* Boot low with 32 MB Flash */ -#define CONFIG_SYS_LOWBOOT 1 -#define CONFIG_SYS_LOWBOOT32 1 -#endif - -/* - * Autobooting - */ - -#define CONFIG_SYS_AUTOLOAD "n" - -#undef CONFIG_BOOTARGS -#define CONFIG_PREBOOT "run try_update" - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "bk=run add_mtd ; run add_consolespec ; bootm 200000\0" \ - "cf1=diskboot 200000 0:1\0" \ - "bootcmd_cf1=run bcf1\0" \ - "bcf=setenv bootargs root=/dev/hda3\0" \ - "bootcmd_nfs=run bnfs\0" \ - "norargs=setenv bootargs root=/dev/mtdblock3 rootfstype=cramfs "\ - "panic=1\0" \ - "bootcmd_nor=cp.b ${kernel_addr} 200000 100000;" \ - "run norargs addip; run bk\0" \ - "bnfs=nfs 200000 ${rootpath}/boot/uImage;" \ - "run nfsargs addip ; run bk\0" \ - "nfsargs=setenv bootargs root=/dev/nfs rw " \ - "nfsroot=${serverip}:${rootpath}\0" \ - "try_update=usb start;sleep 2;usb start;sleep 1;" \ - "fatload usb 0 2F0000 PCPUUPDT 2FF;usb stop;" \ - "source 2F0000\0" \ - "env_addr=FE060000\0" \ - "kernel_addr=FE100000\0" \ - "rootfs_addr=FE200000\0" \ - "add_mtd=setenv bootargs ${bootargs} mtdparts=" \ - "phys_mapped_flash:384k(u),640k(e),1m(k),30m(r)\0" \ - "bcf1=run cf1; run bcf; run addip; run bk\0" \ - "add_consolespec=setenv bootargs ${bootargs} " \ - "console=/dev/null quiet\0" \ - "addip=if test -n ${ethaddr};" \ - "then if test -n ${ipaddr};" \ - "then setenv bootargs ${bootargs} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:"\ - "${netmask}:${hostname}:${netdev}:off;" \ - "fi;" \ - "else;" \ - "setenv bootargs ${bootargs} no_ethaddr;" \ - "fi\0" \ - "hostname=CPUP0\0" \ - "netdev=eth0\0" \ - "bootcmd=run bootcmd_nor\0" \ - "" -/* - * IPB Bus clocking configuration. - */ -#undef CONFIG_SYS_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */ - -/* - * Flash configuration - */ -#define CONFIG_SYS_FLASH_BASE 0xFE000000 -#define CONFIG_SYS_FLASH_SIZE 0x02000000 -#if !defined(CONFIG_SYS_LOWBOOT) -#error "CONFIG_SYS_LOWBOOT not defined?" -#else /* CONFIG_SYS_LOWBOOT */ -#if defined(CONFIG_SYS_LOWBOOT32) -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x00060000) -#endif -#endif /* CONFIG_SYS_LOWBOOT */ - -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 256 /* max num of sects on one chip */ -#define CONFIG_FLASH_CFI_DRIVER -#define CONFIG_SYS_FLASH_CFI -#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT -#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_CS0_START} -#define CONFIG_SYS_FLASH_BANKS_SIZES {CONFIG_SYS_CS0_SIZE} - -/* - * Environment settings - */ -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_SIZE 0x10000 -#define CONFIG_ENV_SECT_SIZE 0x20000 -#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE - -#define CONFIG_ENV_OVERWRITE 1 - -/* - * Memory map - */ -#define CONFIG_SYS_MBAR 0xF0000000 -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_DEFAULT_MBAR 0x80000000 - -/* Use SRAM until RAM will be available */ -#define CONFIG_SYS_INIT_RAM_ADDR MPC5XXX_SRAM -#define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_SIZE /* Size of used area in DPRAM */ - -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE -#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) -# define CONFIG_SYS_RAMBOOT 1 -#endif - -#define CONFIG_SYS_MONITOR_LEN (384 << 10) /* Reserve 384 kB for Monitor */ -#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ - -/* - * Ethernet configuration - */ -#define CONFIG_MPC5xxx_FEC 1 -#define CONFIG_MPC5xxx_FEC_MII100 -/* - * Define CONFIG_MPC5xxx_FEC_MII10 to force FEC at 10Mb - */ -/* #define CONFIG_MPC5xxx_FEC_MII10 */ -#define CONFIG_PHY_ADDR 0x1f -#define CONFIG_PHY_TYPE 0x79c874 /* AMD Phy Controller */ - -/* - * GPIO configuration - */ -#define CONFIG_SYS_GPS_PORT_CONFIG 0x18000004 - -/* - * Miscellaneous configurable options - */ -#define CONFIG_CMDLINE_EDITING 1 -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ - -#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ -#if defined(CONFIG_CMD_KGDB) -# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - -/* - * Various low-level settings - */ -#define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI -#define CONFIG_SYS_HID0_FINAL HID0_ICE -/* Flash at CSBoot, CS0 */ -#define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE -#define CONFIG_SYS_BOOTCS_CFG 0x0002DD00 -#define CONFIG_SYS_CS0_START CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_CS0_SIZE CONFIG_SYS_FLASH_SIZE -/* External SRAM at CS1 */ -#define CONFIG_SYS_CS1_START 0x62000000 -#define CONFIG_SYS_CS1_SIZE 0x00400000 -#define CONFIG_SYS_CS1_CFG 0x00009930 -#define CONFIG_SYS_SRAM_BASE CONFIG_SYS_CS1_START -#define CONFIG_SYS_SRAM_SIZE CONFIG_SYS_CS1_SIZE -/* LED display at CS7 */ -#define CONFIG_SYS_CS7_START 0x6a000000 -#define CONFIG_SYS_CS7_SIZE (64*1024) -#define CONFIG_SYS_CS7_CFG 0x0000bf30 - -#define CONFIG_SYS_CS_BURST 0x00000000 -#define CONFIG_SYS_CS_DEADCYCLE 0x33333003 - -#define CONFIG_SYS_RESET_ADDRESS 0xff000000 - -/*----------------------------------------------------------------------- - * USB stuff - *----------------------------------------------------------------------- - */ -#define CONFIG_USB_CLOCK 0x0001BBBB -#define CONFIG_USB_CONFIG 0x00001000 /* 0x4000 for SE mode */ - -/*----------------------------------------------------------------------- - * IDE/ATA stuff Supports IDE harddisk - *----------------------------------------------------------------------- - */ -#undef CONFIG_IDE_LED /* LED for ide not supported */ - -#define CONFIG_IDE_PREINIT - -#define CONFIG_SYS_IDE_MAXBUS 1 /* max. 1 IDE bus */ -#define CONFIG_SYS_IDE_MAXDEVICE 1 /* max. 2 drives per IDE bus */ - -#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000 - -#define CONFIG_SYS_ATA_BASE_ADDR MPC5XXX_ATA - -/* Offset for data I/O */ -#define CONFIG_SYS_ATA_DATA_OFFSET (0x0060) - -/* Offset for normal register accesses */ -#define CONFIG_SYS_ATA_REG_OFFSET (CONFIG_SYS_ATA_DATA_OFFSET) - -/* Offset for alternate registers */ -#define CONFIG_SYS_ATA_ALT_OFFSET (0x005C) - -/* Interval between registers */ -#define CONFIG_SYS_ATA_STRIDE 4 - -#define CONFIG_ATAPI 1 - -/*----------------------------------------------------------------------- - * Open firmware flat tree support - *----------------------------------------------------------------------- - */ -#define OF_CPU "PowerPC,5200@0" -#define OF_SOC "soc5200@f0000000" -#define OF_TBCLK (bd->bi_busfreq / 4) -#define OF_STDOUT_PATH "/soc5200@f0000000/serial@2000" - -/* Support for the 7-segment display */ -#define CONFIG_SYS_DISP_CHR_RAM CONFIG_SYS_CS7_START -#define CONFIG_SHOW_ACTIVITY /* used for display realization */ - -#define CONFIG_SHOW_BOOT_PROGRESS - -#endif /* __CONFIG_H */ diff --git a/include/configs/ac14xx.h b/include/configs/ac14xx.h deleted file mode 100644 index 4eb8f39aaf..0000000000 --- a/include/configs/ac14xx.h +++ /dev/null @@ -1,516 +0,0 @@ -/* - * (C) Copyright 2009 Wolfgang Denk <wd@denx.de> - * (C) Copyright 2010 DAVE Srl <www.dave.eu> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * ifm AC14xx (MPC5121e based) board configuration file - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#define CONFIG_AC14XX 1 - -/* - * Memory map for the ifm AC14xx board: - * - * 0x0000_0000-0x0FFF_FFFF DDR RAM (256 MB) - * 0x3000_0000-0x3001_FFFF On Chip SRAM (128 KB) - * 0x8000_0000-0x803F_FFFF IMMR (4 MB) - * 0xE000_0000-0xEFFF_FFFF several LPB attached hardware (CSx) - * 0xFC00_0000-0xFFFF_FFFF NOR Boot FLASH (64 MB) - */ - -/* - * High Level Configuration Options - */ -#define CONFIG_E300 1 /* E300 Family */ - -#define CONFIG_SYS_TEXT_BASE 0xFFF00000 - -#define CONFIG_SYS_MPC512X_CLKIN 25000000 /* in Hz */ -#define SCFR1_IPS_DIV 2 -#define SCFR1_LPC_DIV 2 -#define SCFR1_NFC_DIV 2 -#define SCFR1_DIU_DIV 240 - -#define CONFIG_MISC_INIT_R - -#define CONFIG_SYS_IMMR 0x80000000 -#define CONFIG_SYS_DIU_ADDR (CONFIG_SYS_IMMR + 0x2100) - -/* more aggressive 'mtest' over a wider address range */ -#define CONFIG_SYS_ALT_MEMTEST -#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest region */ -#define CONFIG_SYS_MEMTEST_END 0x0FE00000 - -/* - * DDR Setup - manually set all parameters as there's no SPD etc. - */ -#define CONFIG_SYS_DDR_SIZE 256 /* MB */ -#define CONFIG_SYS_DDR_BASE 0x00000000 -#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_BASE -#define CONFIG_SYS_MAX_RAM_SIZE 0x20000000 - -/* - * DDR Controller Configuration - * - * SYS_CFG: - * [31:31] MDDRC Soft Reset: Diabled - * [30:30] DRAM CKE pin: Enabled - * [29:29] DRAM CLK: Enabled - * [28:28] Command Mode: Enabled (For initialization only) - * [27:25] DRAM Row Select: dram_row[15:0] = magenta_address[25:10] - * [24:21] DRAM Bank Select: dram_bank[1:0] = magenta_address[11:10] - * [20:19] Read Test: DON'T USE - * [18:18] Self Refresh: Enabled - * [17:17] 16bit Mode: Disabled - * [16:13] Ready Delay: 2 - * [12:12] Half DQS Delay: Disabled - * [11:11] Quarter DQS Delay: Disabled - * [10:08] Write Delay: 2 - * [07:07] Early ODT: Disabled - * [06:06] On DIE Termination: Disabled - * [05:05] FIFO Overflow Clear: DON'T USE here - * [04:04] FIFO Underflow Clear: DON'T USE here - * [03:03] FIFO Overflow Pending: DON'T USE here - * [02:02] FIFO Underlfow Pending: DON'T USE here - * [01:01] FIFO Overlfow Enabled: Enabled - * [00:00] FIFO Underflow Enabled: Enabled - * TIME_CFG0 - * [31:16] DRAM Refresh Time: 0 CSB clocks - * [15:8] DRAM Command Time: 0 CSB clocks - * [07:00] DRAM Precharge Time: 0 CSB clocks - * TIME_CFG1 - * [31:26] DRAM tRFC: - * [25:21] DRAM tWR1: - * [20:17] DRAM tWRT1: - * [16:11] DRAM tDRR: - * [10:05] DRAM tRC: - * [04:00] DRAM tRAS: - * TIME_CFG2 - * [31:28] DRAM tRCD: - * [27:23] DRAM tFAW: - * [22:19] DRAM tRTW1: - * [18:15] DRAM tCCD: - * [14:10] DRAM tRTP: - * [09:05] DRAM tRP: - * [04:00] DRAM tRPA - */ - -/* - * NOTE: although this board uses DDR1 only, the common source brings defaults - * for DDR2 init sequences, that's why we have to keep those here as well - */ - -/* DDR1 -- 32bit, drive strength (pad configuration) 3 for control and data */ -#define CONFIG_SYS_IOCTRL_MUX_DDR ((0 << 6) | (3 << 3) | (3 << 0)) - -#define CONFIG_SYS_MDDRC_SYS_CFG (/* 0xEAA09100 */ 0 \ - | (1 << 31) /* RST_B */ \ - | (1 << 30) /* CKE */ \ - | (1 << 29) /* CLK_ON */ \ - | (0 << 28) /* CMD_MODE */ \ - | (5 << 25) /* DRAM_ROW_SELECT */ \ - | (5 << 21) /* DRAM_BANK_SELECT */ \ - | (0 << 18) /* SELF_REF_EN */ \ - | (0 << 17) /* 16BIT_MODE */ \ - | (4 << 13) /* RDLY */ \ - | (1 << 12) /* HALF_DQS_DLY */ \ - | (0 << 11) /* QUART_DQS_DLY */ \ - | (1 << 8) /* WDLY */ \ - | (0 << 7) /* EARLY_ODT */ \ - | (0 << 6) /* ON_DIE_TERMINATE */ \ - | (0 << 5) /* FIFO_OV_CLEAR */ \ - | (0 << 4) /* FIFO_UV_CLEAR */ \ - | (0 << 1) /* FIFO_OV_EN */ \ - | (0 << 0) /* FIFO_UV_EN */ \ - ) - -#define CONFIG_SYS_MDDRC_TIME_CFG0 0x04E03124 -#define CONFIG_SYS_MDDRC_TIME_CFG1 0x30CA1147 -#define CONFIG_SYS_MDDRC_TIME_CFG2 0x32B10864 - -/* register address only, i.e. template without values */ -#define CONFIG_SYS_MICRON_BMODE 0x01000000 -#define CONFIG_SYS_MICRON_EMODE 0x01010000 -#define CONFIG_SYS_MICRON_EMODE2 0x01020000 -#define CONFIG_SYS_MICRON_EMODE3 0x01030000 -/* - * values for mode registers (without mode register address) - */ -/* CAS 2.5 (6), burst seq (0) and length 4 (2) */ -#define CONFIG_SYS_MICRON_BMODE_PARAM 0x00000062 -#define CONFIG_SYS_MICRON_BMODE_RSTDLL 0x00000100 -/* DLL enable, reduced drive strength */ -#define CONFIG_SYS_MICRON_EMODE_PARAM 0x00000002 - -#define CONFIG_SYS_DDRCMD_NOP 0x01380000 -#define CONFIG_SYS_DDRCMD_PCHG_ALL 0x01100400 -#define CONFIG_SYS_MICRON_EMR ((1 << 24) | /* CMD_REQ */ \ - (0 << 22) | /* DRAM_CS */ \ - (0 << 21) | /* DRAM_RAS */ \ - (0 << 20) | /* DRAM_CAS */ \ - (0 << 19) | /* DRAM_WEB */ \ - (1 << 16) | /* DRAM_BS[2:0] */ \ - (0 << 15) | /* */ \ - (0 << 12) | /* A12->out */ \ - (0 << 11) | /* A11->RDQS */ \ - (0 << 10) | /* A10->DQS# */ \ - (0 << 7) | /* OCD program */ \ - (0 << 6) | /* Rtt1 */ \ - (0 << 3) | /* posted CAS# */ \ - (0 << 2) | /* Rtt0 */ \ - (1 << 1) | /* ODS */ \ - (0 << 0) /* DLL */ \ - ) -#define CONFIG_SYS_MICRON_EMR2 0x01020000 -#define CONFIG_SYS_MICRON_EMR3 0x01030000 -#define CONFIG_SYS_DDRCMD_RFSH 0x01080000 -#define CONFIG_SYS_MICRON_INIT_DEV_OP 0x01000432 -#define CONFIG_SYS_MICRON_EMR_OCD ((1 << 24) | /* CMD_REQ */ \ - (0 << 22) | /* DRAM_CS */ \ - (0 << 21) | /* DRAM_RAS */ \ - (0 << 20) | /* DRAM_CAS */ \ - (0 << 19) | /* DRAM_WEB */ \ - (1 << 16) | /* DRAM_BS[2:0] */ \ - (0 << 15) | /* */ \ - (0 << 12) | /* A12->out */ \ - (0 << 11) | /* A11->RDQS */ \ - (1 << 10) | /* A10->DQS# */ \ - (7 << 7) | /* OCD program */ \ - (0 << 6) | /* Rtt1 */ \ - (0 << 3) | /* posted CAS# */ \ - (1 << 2) | /* Rtt0 */ \ - (0 << 1) | /* ODS */ \ - (0 << 0) /* DLL */ \ - ) - -/* - * Backward compatible definitions, - * so we do not have to change arch/powerpc/cpu/mpc512x/fixed_sdram.c - */ -#define CONFIG_SYS_DDRCMD_EM2 (CONFIG_SYS_MICRON_EMR2) -#define CONFIG_SYS_DDRCMD_EM3 (CONFIG_SYS_MICRON_EMR3) -#define CONFIG_SYS_DDRCMD_EN_DLL (CONFIG_SYS_MICRON_EMR) -#define CONFIG_SYS_DDRCMD_OCD_DEFAULT (CONFIG_SYS_MICRON_EMR_OCD) - -/* DDR Priority Manager Configuration */ -#define CONFIG_SYS_MDDRCGRP_PM_CFG1 0x00077777 -#define CONFIG_SYS_MDDRCGRP_PM_CFG2 0x00000000 -#define CONFIG_SYS_MDDRCGRP_HIPRIO_CFG 0x00000001 -#define CONFIG_SYS_MDDRCGRP_LUT0_MU 0xFFEEDDCC -#define CONFIG_SYS_MDDRCGRP_LUT0_ML 0xBBAAAAAA -#define CONFIG_SYS_MDDRCGRP_LUT1_MU 0x66666666 -#define CONFIG_SYS_MDDRCGRP_LUT1_ML 0x55555555 -#define CONFIG_SYS_MDDRCGRP_LUT2_MU 0x44444444 -#define CONFIG_SYS_MDDRCGRP_LUT2_ML 0x44444444 -#define CONFIG_SYS_MDDRCGRP_LUT3_MU 0x55555555 -#define CONFIG_SYS_MDDRCGRP_LUT3_ML 0x55555558 -#define CONFIG_SYS_MDDRCGRP_LUT4_MU 0x11111111 -#define CONFIG_SYS_MDDRCGRP_LUT4_ML 0x11111122 -#define CONFIG_SYS_MDDRCGRP_LUT0_AU 0xaaaaaaaa -#define CONFIG_SYS_MDDRCGRP_LUT0_AL 0xaaaaaaaa -#define CONFIG_SYS_MDDRCGRP_LUT1_AU 0x66666666 -#define CONFIG_SYS_MDDRCGRP_LUT1_AL 0x66666666 -#define CONFIG_SYS_MDDRCGRP_LUT2_AU 0x11111111 -#define CONFIG_SYS_MDDRCGRP_LUT2_AL 0x11111111 -#define CONFIG_SYS_MDDRCGRP_LUT3_AU 0x11111111 -#define CONFIG_SYS_MDDRCGRP_LUT3_AL 0x11111111 -#define CONFIG_SYS_MDDRCGRP_LUT4_AU 0x11111111 -#define CONFIG_SYS_MDDRCGRP_LUT4_AL 0x11111111 - -/* - * NOR FLASH on the Local Bus - */ -#define CONFIG_SYS_FLASH_CFI /* use the CFI code */ -#define CONFIG_FLASH_CFI_DRIVER /* use the CFI driver */ -#define CONFIG_SYS_FLASH_BASE 0xFC000000 /* start of FLASH */ -#define CONFIG_SYS_FLASH_SIZE 0x04000000 /* max flash size */ - -#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ -#define CONFIG_SYS_FLASH_BANKS_LIST { \ - CONFIG_SYS_FLASH_BASE + 0 * CONFIG_SYS_FLASH_SIZE, \ - } -#define CONFIG_SYS_MAX_FLASH_SECT 512 /* max sectors per device */ - -#undef CONFIG_SYS_FLASH_CHECKSUM -#define CONFIG_SYS_FLASH_PROTECTION - -/* - * SRAM support - */ -#define CONFIG_SYS_SRAM_BASE 0x30000000 -#define CONFIG_SYS_SRAM_SIZE 0x00020000 /* 128 KB */ - -/* - * CS related parameters - */ -/* CS0 Flash */ -#define CONFIG_SYS_CS0_CFG 0x00031110 -#define CONFIG_SYS_CS0_START 0xFC000000 -#define CONFIG_SYS_CS0_SIZE 0x04000000 -/* CS1 FRAM */ -#define CONFIG_SYS_CS1_CFG 0x00011000 -#define CONFIG_SYS_CS1_START 0xE0000000 -#define CONFIG_SYS_CS1_SIZE 0x00010000 -/* CS2 AS-i 1 */ -#define CONFIG_SYS_CS2_CFG 0x00009100 -#define CONFIG_SYS_CS2_START 0xE0100000 -#define CONFIG_SYS_CS2_SIZE 0x00080000 -/* CS3 netX */ -#define CONFIG_SYS_CS3_CFG 0x000A1140 -#define CONFIG_SYS_CS3_START 0xE0300000 -#define CONFIG_SYS_CS3_SIZE 0x00020000 -/* CS5 safety */ -#define CONFIG_SYS_CS5_CFG 0x0011F000 -#define CONFIG_SYS_CS5_START 0xE0400000 -#define CONFIG_SYS_CS5_SIZE 0x00010000 -/* CS6 AS-i 2 */ -#define CONFIG_SYS_CS6_CFG 0x00009100 -#define CONFIG_SYS_CS6_START 0xE0200000 -#define CONFIG_SYS_CS6_SIZE 0x00080000 - -/* Don't use alternative CS timing for any CS */ -#define CONFIG_SYS_CS_ALETIMING 0x00000000 -#define CONFIG_SYS_CS_BURST 0x00000000 -#define CONFIG_SYS_CS_DEADCYCLE 0x00000020 -#define CONFIG_SYS_CS_HOLDCYCLE 0x00000020 - -/* Use SRAM for initial stack */ -#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_SRAM_BASE -#define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_SRAM_SIZE - -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_MONITOR_LEN (256 * 1024) - -#ifdef CONFIG_FSL_DIU_FB -#define CONFIG_SYS_MALLOC_LEN (6 * 1024 * 1024) -#else -#define CONFIG_SYS_MALLOC_LEN (512 * 1024) -#endif - -/* - * Serial Port - */ -#define CONFIG_CONS_INDEX 1 - -/* - * Serial console configuration - */ -#define CONFIG_PSC_CONSOLE 3 /* console on PSC3 */ -#define CONFIG_SYS_PSC3 -#if CONFIG_PSC_CONSOLE != 3 -#error CONFIG_PSC_CONSOLE must be 3 -#endif - -#define CONSOLE_FIFO_TX_SIZE FIFOC_PSC3_TX_SIZE -#define CONSOLE_FIFO_TX_ADDR FIFOC_PSC3_TX_ADDR -#define CONSOLE_FIFO_RX_SIZE FIFOC_PSC3_RX_SIZE -#define CONSOLE_FIFO_RX_ADDR FIFOC_PSC3_RX_ADDR - -/* - * Clocks in use - */ -#define SCCR1_CLOCKS_EN (CLOCK_SCCR1_CFG_EN | \ - CLOCK_SCCR1_LPC_EN | \ - CLOCK_SCCR1_PSC_EN(CONFIG_PSC_CONSOLE) | \ - CLOCK_SCCR1_PSC_EN(7) | \ - CLOCK_SCCR1_PSCFIFO_EN | \ - CLOCK_SCCR1_DDR_EN | \ - CLOCK_SCCR1_FEC_EN | \ - CLOCK_SCCR1_TPR_EN) - -#define SCCR2_CLOCKS_EN (CLOCK_SCCR2_MEM_EN | \ - CLOCK_SCCR2_SPDIF_EN | \ - CLOCK_SCCR2_DIU_EN | \ - CLOCK_SCCR2_I2C_EN) - -#define CONFIG_CMDLINE_EDITING 1 /* command line history */ - -/* - * IIM - IC Identification Module - */ -#undef CONFIG_FSL_IIM - -/* - * Ethernet configuration - */ -#define CONFIG_MPC512x_FEC 1 -#define CONFIG_PHY_ADDR 0x1F -#define CONFIG_MII 1 /* MII PHY management */ -#define CONFIG_FEC_AN_TIMEOUT 1 -#define CONFIG_HAS_ETH0 - -/* - * Environment - */ -#define CONFIG_ENV_IS_IN_FLASH 1 -/* This has to be a multiple of the flash sector size */ -#define CONFIG_ENV_ADDR 0xFFF40000 -#define CONFIG_ENV_SIZE 0x2000 -#define CONFIG_ENV_SECT_SIZE 0x20000 - -/* Address and size of Redundant Environment Sector */ -#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + \ - CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) - -#define CONFIG_LOADS_ECHO 1 -#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 - -#define CONFIG_CMD_REGINFO - -#if defined(CONFIG_PCI) -#define CONFIG_CMD_PCI -#endif - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ - -#ifdef CONFIG_CMD_KGDB -# define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -# define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif - -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) -/* max number of command args */ -#define CONFIG_SYS_MAXARGS 32 -/* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE - -/* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) - -/* Cache Configuration */ -#define CONFIG_SYS_DCACHE_SIZE 32768 -#define CONFIG_SYS_CACHELINE_SIZE 32 -#ifdef CONFIG_CMD_KGDB -#define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of 32 */ -#endif - -#define CONFIG_SYS_HID0_INIT 0x000000000 -#define CONFIG_SYS_HID0_FINAL (HID0_ENABLE_MACHINE_CHECK | \ - HID0_ICE) -#define CONFIG_SYS_HID2 HID2_HBE - -#define CONFIG_HIGH_BATS 1 /* High BATs supported */ - -#ifdef CONFIG_CMD_KGDB -#define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */ -#endif - -/* - * Environment Configuration - */ -#define CONFIG_ENV_OVERWRITE -#define CONFIG_TIMESTAMP - -/* default load addr for tftp and bootm */ -#define CONFIG_LOADADDR 400000 - - -/* the builtin environment and standard greeting */ -#define CONFIG_PREBOOT "echo;" \ - "echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \ - "echo" - -#define CONFIG_EXTRA_ENV_SETTINGS_DEVEL \ - "muster_nr=-00\0" \ - "fromram=run ramargs addip addtty; " \ - "tftp ${fdt_addr_r} ac14xx/ac14xx.dtb${muster_nr}; " \ - "tftp ${kernel_addr_r} ac14xx/uImage${muster_nr}; " \ - "tftp ${ramdisk_addr_r} ac14xx/uFS${muster_nr}; " \ - "bootm ${kernel_addr_r} ${ramdisk_addr_r} ${fdt_addr_r}\0" \ - "fromnfs=run nfsargs addip addtty; " \ - "tftp ${fdt_addr_r} ac14xx/ac14xx.dtb${muster_nr}; " \ - "tftp ${kernel_addr_r} ac14xx/uImage${muster_nr}; " \ - "bootm ${kernel_addr_r} - ${fdt_addr_r}\0" \ - "fromflash=run nfsargs addip addtty; " \ - "bootm fc020000 - fc000000\0" \ - "mtdargsrec=setenv bootargs root=/dev/mtdblock1 ro\0" \ - "recovery=run mtdargsrec addip addtty; " \ - "bootm ffd20000 - ffee0000\0" \ - "production=run ramargs addip addtty; " \ - "bootm fc020000 fc400000 fc000000\0" \ - "mtdargs=setenv bootargs root=/dev/mtdblock1 ro\0" \ - "prodmtd=run mtdargs addip addtty; " \ - "bootm fc020000 - fc000000\0" \ - "" - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "u-boot_addr_r=200000\0" \ - "kernel_addr_r=600000\0" \ - "fdt_addr_r=a00000\0" \ - "ramdisk_addr_r=b00000\0" \ - "u-boot_addr=FFF00000\0" \ - "kernel_addr=FC020000\0" \ - "fdt_addr=FC000000\0" \ - "ramdisk_addr=FC400000\0" \ - "verify=n\0" \ - "ramdiskfile=ac14xx/uRamdisk\0" \ - "u-boot=ac14xx/u-boot.bin\0" \ - "bootfile=ac14xx/uImage\0" \ - "fdtfile=ac14xx/ac14xx.dtb\0" \ - "netdev=eth0\0" \ - "consdev=ttyPSC0\0" \ - "hostname=ac14xx\0" \ - "nfsargs=setenv bootargs root=/dev/nfs rw " \ - "nfsroot=${serverip}:${rootpath}${muster_nr}\0" \ - "ramargs=setenv bootargs root=/dev/ram rw\0" \ - "addip=setenv bootargs ${bootargs} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ - ":${hostname}:${netdev}:off panic=1\0" \ - "addtty=setenv bootargs ${bootargs} " \ - "console=${consdev},${baudrate}\0" \ - "flash_nfs=run nfsargs addip addtty;" \ - "bootm ${kernel_addr} - ${fdt_addr}\0" \ - "flash_self=run ramargs addip addtty;" \ - "bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \ - "net_nfs=tftp ${kernel_addr_r} ${bootfile};" \ - "tftp ${fdt_addr_r} ${fdtfile};" \ - "run nfsargs addip addtty;" \ - "bootm ${kernel_addr_r} - ${fdt_addr_r}\0" \ - "net_self=tftp ${kernel_addr_r} ${bootfile};" \ - "tftp ${ramdisk_addr_r} ${ramdiskfile};" \ - "tftp ${fdt_addr_r} ${fdtfile};" \ - "run ramargs addip addtty;" \ - "bootm ${kernel_addr_r} ${ramdisk_addr_r} ${fdt_addr_r}\0"\ - "load=tftp ${u-boot_addr_r} ${u-boot}\0" \ - "update=protect off ${u-boot_addr} +${filesize};" \ - "era ${u-boot_addr} +${filesize};" \ - "cp.b ${u-boot_addr_r} ${u-boot_addr} ${filesize}\0" \ - CONFIG_EXTRA_ENV_SETTINGS_DEVEL \ - "upd=run load update\0" \ - "" - -#define CONFIG_BOOTCOMMAND "run production" - -#define CONFIG_ARP_TIMEOUT 200UL - -#define CONFIG_OF_SUPPORT_OLD_DEVICE_TREES 1 - -#define OF_CPU "PowerPC,5121@0" -#define OF_SOC_COMPAT "fsl,mpc5121-immr" -#define OF_TBCLK (bd->bi_busfreq / 4) -#define OF_STDOUT_PATH "/soc@80000000/serial@11300" - -#endif /* __CONFIG_H */ diff --git a/include/configs/aria.h b/include/configs/aria.h deleted file mode 100644 index 3612e037b9..0000000000 --- a/include/configs/aria.h +++ /dev/null @@ -1,589 +0,0 @@ -/* - * (C) Copyright 2009 Wolfgang Denk <wd@denx.de> - * (C) Copyright 2009, DAVE Srl <www.dave.eu> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * Aria board configuration file - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#define CONFIG_ARIA 1 - -/* - * Memory map for the ARIA board: - * - * 0x0000_0000-0x0FFF_FFFF DDR RAM (256 MB) - * 0x3000_0000-0x3001_FFFF On Chip SRAM (128 KB) - * 0x3010_0000-0x3011_FFFF On Board SRAM (128 KB) - CS6 - * 0x3020_0000-0x3021_FFFF FPGA (128 KB) - CS2 - * 0x8000_0000-0x803F_FFFF IMMR (4 MB) - * 0x8400_0000-0x82FF_FFFF PCI I/O space (16 MB) - * 0xA000_0000-0xAFFF_FFFF PCI memory space (256 MB) - * 0xB000_0000-0xBFFF_FFFF PCI memory mapped I/O space (256 MB) - * 0xFC00_0000-0xFFFF_FFFF NOR Boot FLASH (64 MB) - */ - -/* - * High Level Configuration Options - */ -#define CONFIG_E300 1 /* E300 Family */ -#define CONFIG_FSL_DIU_FB 1 /* FSL DIU */ - -#define CONFIG_SYS_TEXT_BASE 0xFFF00000 - -/* video */ - -/* CONFIG_PCI is defined at config time */ - -#define CONFIG_SYS_MPC512X_CLKIN 33000000 /* in Hz */ - -#define CONFIG_MISC_INIT_R - -#define CONFIG_SYS_IMMR 0x80000000 -#define CONFIG_SYS_DIU_ADDR (CONFIG_SYS_IMMR+0x2100) - -#define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest region */ -#define CONFIG_SYS_MEMTEST_END 0x00400000 - -/* - * DDR Setup - manually set all parameters as there's no SPD etc. - */ -#define CONFIG_SYS_DDR_SIZE 256 /* MB */ -#define CONFIG_SYS_DDR_BASE 0x00000000 -#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_BASE -#define CONFIG_SYS_MAX_RAM_SIZE 0x20000000 - -#define CONFIG_SYS_IOCTRL_MUX_DDR 0x00000036 - -/* DDR Controller Configuration - * - * SYS_CFG: - * [31:31] MDDRC Soft Reset: Diabled - * [30:30] DRAM CKE pin: Enabled - * [29:29] DRAM CLK: Enabled - * [28:28] Command Mode: Enabled (For initialization only) - * [27:25] DRAM Row Select: dram_row[15:0] = magenta_address[25:10] - * [24:21] DRAM Bank Select: dram_bank[1:0] = magenta_address[11:10] - * [20:19] Read Test: DON'T USE - * [18:18] Self Refresh: Enabled - * [17:17] 16bit Mode: Disabled - * [16:13] Ready Delay: 2 - * [12:12] Half DQS Delay: Disabled - * [11:11] Quarter DQS Delay: Disabled - * [10:08] Write Delay: 2 - * [07:07] Early ODT: Disabled - * [06:06] On DIE Termination: Disabled - * [05:05] FIFO Overflow Clear: DON'T USE here - * [04:04] FIFO Underflow Clear: DON'T USE here - * [03:03] FIFO Overflow Pending: DON'T USE here - * [02:02] FIFO Underlfow Pending: DON'T USE here - * [01:01] FIFO Overlfow Enabled: Enabled - * [00:00] FIFO Underflow Enabled: Enabled - * TIME_CFG0 - * [31:16] DRAM Refresh Time: 0 CSB clocks - * [15:8] DRAM Command Time: 0 CSB clocks - * [07:00] DRAM Precharge Time: 0 CSB clocks - * TIME_CFG1 - * [31:26] DRAM tRFC: - * [25:21] DRAM tWR1: - * [20:17] DRAM tWRT1: - * [16:11] DRAM tDRR: - * [10:05] DRAM tRC: - * [04:00] DRAM tRAS: - * TIME_CFG2 - * [31:28] DRAM tRCD: - * [27:23] DRAM tFAW: - * [22:19] DRAM tRTW1: - * [18:15] DRAM tCCD: - * [14:10] DRAM tRTP: - * [09:05] DRAM tRP: - * [04:00] DRAM tRPA - */ -#define CONFIG_SYS_MDDRC_SYS_CFG ( (1 << 31) | /* RST_B */ \ - (1 << 30) | /* CKE */ \ - (1 << 29) | /* CLK_ON */ \ - (0 << 28) | /* CMD_MODE */ \ - (4 << 25) | /* DRAM_ROW_SELECT */ \ - (3 << 21) | /* DRAM_BANK_SELECT */ \ - (0 << 18) | /* SELF_REF_EN */ \ - (0 << 17) | /* 16BIT_MODE */ \ - (2 << 13) | /* RDLY */ \ - (0 << 12) | /* HALF_DQS_DLY */ \ - (1 << 11) | /* QUART_DQS_DLY */ \ - (2 << 8) | /* WDLY */ \ - (0 << 7) | /* EARLY_ODT */ \ - (1 << 6) | /* ON_DIE_TERMINATE */ \ - (0 << 5) | /* FIFO_OV_CLEAR */ \ - (0 << 4) | /* FIFO_UV_CLEAR */ \ - (0 << 1) | /* FIFO_OV_EN */ \ - (0 << 0) /* FIFO_UV_EN */ \ - ) - -#define CONFIG_SYS_MDDRC_TIME_CFG0 0x030C3D2E -#define CONFIG_SYS_MDDRC_TIME_CFG1 0x55D81189 -#define CONFIG_SYS_MDDRC_TIME_CFG2 0x34790863 - -#define CONFIG_SYS_DDRCMD_NOP 0x01380000 -#define CONFIG_SYS_DDRCMD_PCHG_ALL 0x01100400 -#define CONFIG_SYS_MICRON_EMR ( (1 << 24) | /* CMD_REQ */ \ - (0 << 22) | /* DRAM_CS */ \ - (0 << 21) | /* DRAM_RAS */ \ - (0 << 20) | /* DRAM_CAS */ \ - (0 << 19) | /* DRAM_WEB */ \ - (1 << 16) | /* DRAM_BS[2:0] */ \ - (0 << 15) | /* */ \ - (0 << 12) | /* A12->out */ \ - (0 << 11) | /* A11->RDQS */ \ - (0 << 10) | /* A10->DQS# */ \ - (0 << 7) | /* OCD program */ \ - (0 << 6) | /* Rtt1 */ \ - (0 << 3) | /* posted CAS# */ \ - (0 << 2) | /* Rtt0 */ \ - (1 << 1) | /* ODS */ \ - (0 << 0) /* DLL */ \ - ) -#define CONFIG_SYS_MICRON_EMR2 0x01020000 -#define CONFIG_SYS_MICRON_EMR3 0x01030000 -#define CONFIG_SYS_DDRCMD_RFSH 0x01080000 -#define CONFIG_SYS_MICRON_INIT_DEV_OP 0x01000432 -#define CONFIG_SYS_MICRON_EMR_OCD ( (1 << 24) | /* CMD_REQ */ \ - (0 << 22) | /* DRAM_CS */ \ - (0 << 21) | /* DRAM_RAS */ \ - (0 << 20) | /* DRAM_CAS */ \ - (0 << 19) | /* DRAM_WEB */ \ - (1 << 16) | /* DRAM_BS[2:0] */ \ - (0 << 15) | /* */ \ - (0 << 12) | /* A12->out */ \ - (0 << 11) | /* A11->RDQS */ \ - (1 << 10) | /* A10->DQS# */ \ - (7 << 7) | /* OCD program */ \ - (0 << 6) | /* Rtt1 */ \ - (0 << 3) | /* posted CAS# */ \ - (1 << 2) | /* Rtt0 */ \ - (0 << 1) | /* ODS (Output Drive Strength) */ \ - (0 << 0) /* DLL */ \ - ) - -/* - * Backward compatible definitions, - * so we do not have to change arch/powerpc/cpu/mpc512x/fixed_sdram.c - */ -#define CONFIG_SYS_DDRCMD_EM2 (CONFIG_SYS_MICRON_EMR2) -#define CONFIG_SYS_DDRCMD_EM3 (CONFIG_SYS_MICRON_EMR3) -#define CONFIG_SYS_DDRCMD_EN_DLL (CONFIG_SYS_MICRON_EMR) -#define CONFIG_SYS_DDRCMD_OCD_DEFAULT (CONFIG_SYS_MICRON_EMR_OCD) - -/* DDR Priority Manager Configuration */ -#define CONFIG_SYS_MDDRCGRP_PM_CFG1 0x00077777 -#define CONFIG_SYS_MDDRCGRP_PM_CFG2 0x00000000 -#define CONFIG_SYS_MDDRCGRP_HIPRIO_CFG 0x00000001 -#define CONFIG_SYS_MDDRCGRP_LUT0_MU 0xFFEEDDCC -#define CONFIG_SYS_MDDRCGRP_LUT0_ML 0xBBAAAAAA -#define CONFIG_SYS_MDDRCGRP_LUT1_MU 0x66666666 -#define CONFIG_SYS_MDDRCGRP_LUT1_ML 0x55555555 -#define CONFIG_SYS_MDDRCGRP_LUT2_MU 0x44444444 -#define CONFIG_SYS_MDDRCGRP_LUT2_ML 0x44444444 -#define CONFIG_SYS_MDDRCGRP_LUT3_MU 0x55555555 -#define CONFIG_SYS_MDDRCGRP_LUT3_ML 0x55555558 -#define CONFIG_SYS_MDDRCGRP_LUT4_MU 0x11111111 -#define CONFIG_SYS_MDDRCGRP_LUT4_ML 0x11111122 -#define CONFIG_SYS_MDDRCGRP_LUT0_AU 0xaaaaaaaa -#define CONFIG_SYS_MDDRCGRP_LUT0_AL 0xaaaaaaaa -#define CONFIG_SYS_MDDRCGRP_LUT1_AU 0x66666666 -#define CONFIG_SYS_MDDRCGRP_LUT1_AL 0x66666666 -#define CONFIG_SYS_MDDRCGRP_LUT2_AU 0x11111111 -#define CONFIG_SYS_MDDRCGRP_LUT2_AL 0x11111111 -#define CONFIG_SYS_MDDRCGRP_LUT3_AU 0x11111111 -#define CONFIG_SYS_MDDRCGRP_LUT3_AL 0x11111111 -#define CONFIG_SYS_MDDRCGRP_LUT4_AU 0x11111111 -#define CONFIG_SYS_MDDRCGRP_LUT4_AL 0x11111111 - -/* - * NOR FLASH on the Local Bus - */ -#define CONFIG_SYS_FLASH_CFI /* use the CFI code */ -#define CONFIG_FLASH_CFI_DRIVER /* use the CFI driver */ -#define CONFIG_SYS_FLASH_BASE 0xF8000000 /* start of FLASH */ -#define CONFIG_SYS_FLASH_SIZE 0x08000000 /* max flash size */ - -#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ -#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE} -#define CONFIG_SYS_MAX_FLASH_SECT 1024 /* max sectors */ - -#undef CONFIG_SYS_FLASH_CHECKSUM - -/* - * NAND FLASH support - * drivers/mtd/nand/mpc5121_nfc.c (rev 2 silicon only) - */ -#define CONFIG_CMD_NAND /* enable NAND support */ -#define CONFIG_JFFS2_NAND /* with JFFS2 on it */ -#define CONFIG_NAND_MPC5121_NFC -#define CONFIG_SYS_NAND_BASE 0x40000000 -#define CONFIG_SYS_MAX_NAND_DEVICE 1 - -/* - * Configuration parameters for MPC5121 NAND driver - */ -#define CONFIG_FSL_NFC_WIDTH 1 -#define CONFIG_FSL_NFC_WRITE_SIZE 2048 -#define CONFIG_FSL_NFC_SPARE_SIZE 64 -#define CONFIG_FSL_NFC_CHIPS CONFIG_SYS_MAX_NAND_DEVICE - -#define CONFIG_SYS_SRAM_BASE 0x30000000 -#define CONFIG_SYS_SRAM_SIZE 0x00020000 /* 128 KB */ - -/* Make two SRAM regions contiguous */ -#define CONFIG_SYS_ARIA_SRAM_BASE (CONFIG_SYS_SRAM_BASE + \ - CONFIG_SYS_SRAM_SIZE) -#define CONFIG_SYS_ARIA_SRAM_SIZE 0x00100000 /* reserve 1MB-window */ -#define CONFIG_SYS_CS6_START CONFIG_SYS_ARIA_SRAM_BASE -#define CONFIG_SYS_CS6_SIZE CONFIG_SYS_ARIA_SRAM_SIZE - -#define CONFIG_SYS_ARIA_FPGA_BASE (CONFIG_SYS_ARIA_SRAM_BASE + \ - CONFIG_SYS_ARIA_SRAM_SIZE) -#define CONFIG_SYS_ARIA_FPGA_SIZE 0x20000 /* 128 KB */ - -#define CONFIG_SYS_CS2_START CONFIG_SYS_ARIA_FPGA_BASE -#define CONFIG_SYS_CS2_SIZE CONFIG_SYS_ARIA_FPGA_SIZE - -#define CONFIG_SYS_CS0_CFG 0x05059150 -#define CONFIG_SYS_CS2_CFG ( (5 << 24) | \ - (5 << 16) | \ - (1 << 15) | \ - (0 << 14) | \ - (0 << 13) | \ - (1 << 12) | \ - (0 << 10) | \ - (3 << 8) | /* 32 bit */ \ - (0 << 7) | \ - (1 << 6) | \ - (1 << 4) | \ - (0 << 3) | \ - (0 << 2) | \ - (0 << 1) | \ - (0 << 0) \ - ) -#define CONFIG_SYS_CS6_CFG 0x05059150 - -/* Use alternative CS timing for CS0 and CS2 */ -#define CONFIG_SYS_CS_ALETIMING 0x00000005 - -/* Use SRAM for initial stack */ -#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_SRAM_BASE -#define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_SRAM_SIZE - -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_MONITOR_LEN (384 * 1024) - -#ifdef CONFIG_FSL_DIU_FB -#define CONFIG_SYS_MALLOC_LEN (6 * 1024 * 1024) -#else -#define CONFIG_SYS_MALLOC_LEN (512 * 1024) -#endif - -/* FPGA */ -#define CONFIG_ARIA_FPGA 1 - -/* - * Serial Port - */ -#define CONFIG_CONS_INDEX 1 - -/* - * Serial console configuration - */ -#define CONFIG_PSC_CONSOLE 3 /* console on PSC3 */ -#define CONFIG_SYS_PSC3 -#if CONFIG_PSC_CONSOLE != 3 -#error CONFIG_PSC_CONSOLE must be 3 -#endif - -#define CONFIG_SYS_BAUDRATE_TABLE \ - {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200} - -#define CONSOLE_FIFO_TX_SIZE FIFOC_PSC3_TX_SIZE -#define CONSOLE_FIFO_TX_ADDR FIFOC_PSC3_TX_ADDR -#define CONSOLE_FIFO_RX_SIZE FIFOC_PSC3_RX_SIZE -#define CONSOLE_FIFO_RX_ADDR FIFOC_PSC3_RX_ADDR - -#define CONFIG_CMDLINE_EDITING 1 /* command line history */ - -/* - * PCI - */ -#ifdef CONFIG_PCI -#define CONFIG_PCI_INDIRECT_BRIDGE - -#define CONFIG_SYS_PCI_MEM_BASE 0xA0000000 -#define CONFIG_SYS_PCI_MEM_PHYS CONFIG_SYS_PCI_MEM_BASE -#define CONFIG_SYS_PCI_MEM_SIZE 0x10000000 /* 256M */ -#define CONFIG_SYS_PCI_MMIO_BASE (CONFIG_SYS_PCI_MEM_BASE + \ - CONFIG_SYS_PCI_MEM_SIZE) -#define CONFIG_SYS_PCI_MMIO_PHYS CONFIG_SYS_PCI_MMIO_BASE -#define CONFIG_SYS_PCI_MMIO_SIZE 0x10000000 /* 256M */ -#define CONFIG_SYS_PCI_IO_BASE 0x00000000 -#define CONFIG_SYS_PCI_IO_PHYS 0x84000000 -#define CONFIG_SYS_PCI_IO_SIZE 0x01000000 /* 16M */ - -#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ - -#endif - -/* - * IIM - IC Identification Module - */ -#undef CONFIG_FSL_IIM - -/* - * Ethernet configuration - */ -#define CONFIG_MPC512x_FEC 1 -#define CONFIG_PHY_ADDR 0x17 -#define CONFIG_MII 1 /* MII PHY management */ -#define CONFIG_FEC_AN_TIMEOUT 1 -#define CONFIG_HAS_ETH0 - -/* - * Environment - */ -#define CONFIG_ENV_IS_IN_FLASH 1 -/* This has to be a multiple of the flash sector size */ -#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + \ - CONFIG_SYS_MONITOR_LEN) -#define CONFIG_ENV_SIZE 0x2000 -#define CONFIG_ENV_SECT_SIZE 0x20000 /* one sector (256K) */ - -/* Address and size of Redundant Environment Sector */ -#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + \ - CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) - -#define CONFIG_LOADS_ECHO 1 -#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 - -#define CONFIG_CMD_REGINFO - -#if defined(CONFIG_PCI) -#define CONFIG_CMD_PCI -#endif - -/* - * Dynamic MTD partition support - */ -#define CONFIG_CMD_MTDPARTS -#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ -#define CONFIG_FLASH_CFI_MTD -#define MTDIDS_DEFAULT "nor0=f8000000.flash,nand0=mpc5121.nand" - -/* - * NOR flash layout: - * - * F8000000 - FEAFFFFF 107 MiB User Data - * FEB00000 - FFAFFFFF 16 MiB Root File System - * FFB00000 - FFFEFFFF 4 MiB Linux Kernel - * FFF00000 - FFFBFFFF 768 KiB U-Boot (up to 512 KiB) and 2 x * env - * FFFC0000 - FFFFFFFF 256 KiB Device Tree - * - * NAND flash layout: one big partition - */ -#define MTDPARTS_DEFAULT "mtdparts=f8000000.flash:107m(user)," \ - "16m(rootfs)," \ - "4m(kernel)," \ - "768k(u-boot)," \ - "256k(dtb);" \ - "mpc5121.nand:-(data)" - -/* - * Watchdog timeout = CONFIG_SYS_WATCHDOG_VALUE * 65536 / IPS clock. - * For example, when IPS is set to 66MHz and CONFIG_SYS_WATCHDOG_VALUE - * is set to 0xFFFF, watchdog timeouts after about 64s. For details - * refer to chapter 36 of the MPC5121e Reference Manual. - */ -/* #define CONFIG_WATCHDOG */ /* enable watchdog */ -#define CONFIG_SYS_WATCHDOG_VALUE 0xFFFF - - /* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ - -#ifdef CONFIG_CMD_KGDB -# define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -# define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif - -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) -/* max number of command args */ -#define CONFIG_SYS_MAXARGS 32 -/* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE - -/* - * For booting Linux, the board info and command line data - * have to be in the first 256 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (256 << 20) - -/* Cache Configuration */ -#define CONFIG_SYS_DCACHE_SIZE 32768 -#define CONFIG_SYS_CACHELINE_SIZE 32 -#ifdef CONFIG_CMD_KGDB -#define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of 32 */ -#endif - -#define CONFIG_SYS_HID0_INIT 0x000000000 -#define CONFIG_SYS_HID0_FINAL (HID0_ENABLE_MACHINE_CHECK | \ - HID0_ICE) -#define CONFIG_SYS_HID2 HID2_HBE - -#define CONFIG_HIGH_BATS 1 /* High BATs supported */ - -#ifdef CONFIG_CMD_KGDB -#define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */ -#endif - -/* - * Environment Configuration - */ -#define CONFIG_ENV_OVERWRITE -#define CONFIG_TIMESTAMP - -#define CONFIG_HOSTNAME aria -#define CONFIG_BOOTFILE "aria/uImage" -#define CONFIG_ROOTPATH "/opt/eldk/ppc_6xx" - -#define CONFIG_LOADADDR 400000 /* default load addr */ - -#undef CONFIG_BOOTARGS /* the boot command will set bootargs */ - -#define CONFIG_PREBOOT "echo;" \ - "echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \ - "echo" - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "u-boot_addr_r=200000\0" \ - "kernel_addr_r=600000\0" \ - "fdt_addr_r=880000\0" \ - "ramdisk_addr_r=900000\0" \ - "u-boot_addr=FFF00000\0" \ - "kernel_addr=FFB00000\0" \ - "fdt_addr=FFFC0000\0" \ - "ramdisk_addr=FEB00000\0" \ - "ramdiskfile=aria/uRamdisk\0" \ - "u-boot=aria/u-boot.bin\0" \ - "fdtfile=aria/aria.dtb\0" \ - "netdev=eth0\0" \ - "consdev=ttyPSC0\0" \ - "nfsargs=setenv bootargs root=/dev/nfs rw " \ - "nfsroot=${serverip}:${rootpath}\0" \ - "ramargs=setenv bootargs root=/dev/ram rw\0" \ - "addip=setenv bootargs ${bootargs} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ - ":${hostname}:${netdev}:off panic=1\0" \ - "addtty=setenv bootargs ${bootargs} " \ - "console=${consdev},${baudrate}\0" \ - "flash_nfs=run nfsargs addip addtty;" \ - "bootm ${kernel_addr} - ${fdt_addr}\0" \ - "flash_self=run ramargs addip addtty;" \ - "bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \ - "net_nfs=tftp ${kernel_addr_r} ${bootfile};" \ - "tftp ${fdt_addr_r} ${fdtfile};" \ - "run nfsargs addip addtty;" \ - "bootm ${kernel_addr_r} - ${fdt_addr_r}\0" \ - "net_self=tftp ${kernel_addr_r} ${bootfile};" \ - "tftp ${ramdisk_addr_r} ${ramdiskfile};" \ - "tftp ${fdt_addr_r} ${fdtfile};" \ - "run ramargs addip addtty;" \ - "bootm ${kernel_addr_r} ${ramdisk_addr_r} ${fdt_addr_r}\0"\ - "load=tftp ${u-boot_addr_r} ${u-boot}\0" \ - "update=protect off ${u-boot_addr} +${filesize};" \ - "era ${u-boot_addr} +${filesize};" \ - "cp.b ${u-boot_addr_r} ${u-boot_addr} ${filesize}\0" \ - "upd=run load update\0" \ - "" - -#define CONFIG_BOOTCOMMAND "run flash_self" - -#define CONFIG_OF_SUPPORT_OLD_DEVICE_TREES 1 - -#define OF_CPU "PowerPC,5121@0" -#define OF_SOC_COMPAT "fsl,mpc5121-immr" -#define OF_TBCLK (bd->bi_busfreq / 4) -#define OF_STDOUT_PATH "/soc@80000000/serial@11300" - -/*----------------------------------------------------------------------- - * IDE/ATA stuff - *----------------------------------------------------------------------- - */ - -#undef CONFIG_IDE_LED /* LED for IDE not supported */ - -#define CONFIG_IDE_RESET /* reset for IDE supported */ -#define CONFIG_IDE_PREINIT - -#define CONFIG_SYS_IDE_MAXBUS 1 /* 1 IDE bus */ -#define CONFIG_SYS_IDE_MAXDEVICE 2 /* 1 drive per IDE bus */ - -#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000 -#define CONFIG_SYS_ATA_BASE_ADDR get_pata_base() - -/* Offset for data I/O RefMan MPC5121EE Table 28-10 */ -#define CONFIG_SYS_ATA_DATA_OFFSET (0x00A0) - -/* Offset for normal register accesses */ -#define CONFIG_SYS_ATA_REG_OFFSET (CONFIG_SYS_ATA_DATA_OFFSET) - -/* Offset for alternate registers RefMan MPC5121EE Table 28-23 */ -#define CONFIG_SYS_ATA_ALT_OFFSET (0x00D8) - -/* Interval between registers */ -#define CONFIG_SYS_ATA_STRIDE 4 - -#define ATA_BASE_ADDR get_pata_base() - -/* - * Control register bit definitions - */ -#define FSL_ATA_CTRL_FIFO_RST_B 0x80000000 -#define FSL_ATA_CTRL_ATA_RST_B 0x40000000 -#define FSL_ATA_CTRL_FIFO_TX_EN 0x20000000 -#define FSL_ATA_CTRL_FIFO_RCV_EN 0x10000000 -#define FSL_ATA_CTRL_DMA_PENDING 0x08000000 -#define FSL_ATA_CTRL_DMA_ULTRA 0x04000000 -#define FSL_ATA_CTRL_DMA_WRITE 0x02000000 -#define FSL_ATA_CTRL_IORDY_EN 0x01000000 - -/* Clocks in use */ -#define SCCR1_CLOCKS_EN (CLOCK_SCCR1_CFG_EN | \ - CLOCK_SCCR1_LPC_EN | \ - CLOCK_SCCR1_PSC_EN(CONFIG_PSC_CONSOLE) | \ - CLOCK_SCCR1_PSCFIFO_EN | \ - CLOCK_SCCR1_DDR_EN | \ - CLOCK_SCCR1_FEC_EN | \ - CLOCK_SCCR1_NFC_EN | \ - CLOCK_SCCR1_PATA_EN | \ - CLOCK_SCCR1_PCI_EN | \ - CLOCK_SCCR1_TPR_EN) - -#define SCCR2_CLOCKS_EN (CLOCK_SCCR2_MEM_EN | \ - CLOCK_SCCR2_SPDIF_EN | \ - CLOCK_SCCR2_DIU_EN | \ - CLOCK_SCCR2_I2C_EN) - -#endif /* __CONFIG_H */ diff --git a/include/configs/canmb.h b/include/configs/canmb.h deleted file mode 100644 index b7c74b4264..0000000000 --- a/include/configs/canmb.h +++ /dev/null @@ -1,199 +0,0 @@ -/* - * (C) Copyright 2005 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ - -#define CONFIG_MPC5200 1 /* This is a MPC5200 CPU */ -#define CONFIG_CANMB 1 /* ... on canmb board - we need this for FEC.C */ - -/* - * allowed and functional CONFIG_SYS_TEXT_BASE values: - * 0xfe000000 low boot at 0x00000100 (default board setting) - * 0x00100000 RAM load and test - */ -#define CONFIG_SYS_TEXT_BASE 0xFE000000 - -#define CONFIG_SYS_MPC5XXX_CLKIN 33000000 /* ... running at 33.000000MHz */ - -#define CONFIG_BOARD_EARLY_INIT_R - -#define CONFIG_HIGH_BATS 1 /* High BATs supported */ - -/* - * Serial console configuration - */ -#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - -/* - * Command line configuration. - */ -#define CONFIG_CMD_REGINFO - -/* - * MUST be low boot - HIGHBOOT is not supported anymore - */ -#if (CONFIG_SYS_TEXT_BASE == 0xFE000000) /* Boot low with 32 MB Flash */ -# define CONFIG_SYS_LOWBOOT 1 -# define CONFIG_SYS_LOWBOOT16 1 -#else -# error "CONFIG_SYS_TEXT_BASE must be 0xFE000000" -#endif - -/* - * Autobooting - */ - -#define CONFIG_PREBOOT "echo;" \ - "echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \ - "echo" - -#undef CONFIG_BOOTARGS - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "netdev=eth0\0" \ - "nfsargs=setenv bootargs root=/dev/nfs rw " \ - "nfsroot=${serverip}:${rootpath}\0" \ - "ramargs=setenv bootargs root=/dev/ram rw\0" \ - "addip=setenv bootargs ${bootargs} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ - ":${hostname}:${netdev}:off panic=1\0" \ - "flash_nfs=run nfsargs addip;" \ - "bootm ${kernel_addr}\0" \ - "flash_self=run ramargs addip;" \ - "bootm ${kernel_addr} ${ramdisk_addr}\0" \ - "net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \ - "rootpath=/opt/eldk/ppc_6xx\0" \ - "bootfile=/tftpboot/canmb/uImage\0" \ - "" - -#define CONFIG_BOOTCOMMAND "run flash_self" - -/* - * IPB Bus clocking configuration. - */ -#undef CONFIG_SYS_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */ - -/* - * Flash configuration, expect one 16 Megabyte Bank at most - */ -#define CONFIG_SYS_FLASH_BASE 0xFE000000 -#define CONFIG_SYS_FLASH_SIZE 0x02000000 -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 256 /* max num of sects on one chip */ - -#define CONFIG_SYS_FLASH_ERASE_TOUT 240000 /* Flash Erase Timeout (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */ - -#define CONFIG_FLASH_CFI_DRIVER -#define CONFIG_SYS_FLASH_CFI -#define CONFIG_SYS_FLASH_EMPTY_INFO - -/* - * Environment settings - */ -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_OFFSET (2*128*1024) -#define CONFIG_ENV_SIZE 0x2000 -#define CONFIG_ENV_SECT_SIZE (128*1024) - -/* - * Memory map - * - * Warning!!! with the current BestComm Task, MBAR MUST BE set to 0xf0000000 - */ -#define CONFIG_SYS_MBAR 0xf0000000 /* DO NOT CHANGE this */ -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_DEFAULT_MBAR 0x80000000 - -/* Use SRAM until RAM will be available */ -#define CONFIG_SYS_INIT_RAM_ADDR MPC5XXX_SRAM -#define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_SIZE /* Size of used area in DPRAM */ - -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE -#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) -# define CONFIG_SYS_RAMBOOT 1 -#endif - -#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ -#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ - -/* - * Ethernet configuration - */ -#define CONFIG_MPC5xxx_FEC 1 -#define CONFIG_MPC5xxx_FEC_MII100 -#define CONFIG_PHY_ADDR 0x0 -/* - * GPIO configuration: - * PSC1,2,3 predefined as UART - * PCI disabled - * Ethernet 100 with MD - */ -#define CONFIG_SYS_GPS_PORT_CONFIG 0x00058444 - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#if defined(CONFIG_CMD_KGDB) -# define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -# define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x01f00000 /* 1 ... 31 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0x200000 /* default load address */ - -#define CONFIG_RTC_MPC5200 1 /* use internal MPC5200 RTC */ - -#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ -#if defined(CONFIG_CMD_KGDB) -# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - -/* - * Various low-level settings - */ -#define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI -#define CONFIG_SYS_HID0_FINAL HID0_ICE - -#define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE -#define CONFIG_SYS_BOOTCS_CFG 0x00047D01 -#define CONFIG_SYS_CS0_START CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_CS0_SIZE CONFIG_SYS_FLASH_SIZE - -#define CONFIG_SYS_CS_BURST 0x00000000 -#define CONFIG_SYS_CS_DEADCYCLE 0x33333333 - -#define CONFIG_SYS_RESET_ADDRESS 0x7f000000 - -#endif /* __CONFIG_H */ diff --git a/include/configs/charon.h b/include/configs/charon.h deleted file mode 100644 index 913b707a5f..0000000000 --- a/include/configs/charon.h +++ /dev/null @@ -1,63 +0,0 @@ -/* - * (C) Copyright 2003-2005 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * (C) Copyright 2004-2006 - * Martin Krause, TQ-Systems GmbH, martin.krause@tqs.de - * - * (C) Copyright 2010 - * Heiko Schocher, DENX Software Engineering, hs@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_CHARON_H -#define __CONFIG_CHARON_H - -#define CONFIG_CHARON -#define CONFIG_HOSTNAME charon - -#define CONFIG_SYS_GPS_PORT_CONFIG 0x81550414 - -/* include common defines/options for TQM52xx boards */ -#include "TQM5200.h" - -/* defines special on charon board */ -#undef CONFIG_RTC_MPC5200 - -#undef CUSTOM_ENV_SETTINGS -#define CUSTOM_ENV_SETTINGS \ - "bootfile=/tftpboot/charon/uImage\0" \ - "fdt_file=/tftpboot/charon/charon.dtb\0" \ - "u-boot=/tftpboot/charon/u-boot.bin\0" \ - "mtdparts=" MTDPARTS_DEFAULT "\0" \ - "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" - -/* additional features on charon board */ -#define CONFIG_RESET_PHY_R - -/* - * I2C configuration - */ -#define CONFIG_I2C_MULTI_BUS - -#define CONFIG_SYS_TFP410_ADDR 0x38 -#define CONFIG_SYS_TFP410_BUS 0 - -/* - * FPGA configuration - */ -#define CONFIG_SYS_CS3_START 0xE8000000 -#define CONFIG_SYS_CS3_SIZE 0x80000 /* 512 KByte */ - -/* - * CS3 Config Register Init: - * CS3 Enabled - * AddrBus: 8bits - * DataBus: 4bytes - * Multiplexed: Yes - * MuxBank: 00 - */ -#define CONFIG_SYS_CS3_CFG 0x00009310 - -#endif /* __CONFIG_CHARON_H */ diff --git a/include/configs/cm5200.h b/include/configs/cm5200.h deleted file mode 100644 index 3777a0d863..0000000000 --- a/include/configs/cm5200.h +++ /dev/null @@ -1,286 +0,0 @@ -/* - * (C) Copyright 2003-2007 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - */ -#define CONFIG_MPC5200 1 /* This is an MPC5200 CPU */ -#define CONFIG_CM5200 1 /* ... on CM5200 platform */ - -#define CONFIG_SYS_TEXT_BASE 0xfc000000 - -#define CONFIG_HIGH_BATS 1 /* High BATs supported */ - -/* - * Supported commands - */ -#define CONFIG_CMD_REGINFO - -/* - * Serial console configuration - */ -#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } - -/* - * Ethernet configuration - */ -#define CONFIG_MPC5xxx_FEC 1 -#define CONFIG_MPC5xxx_FEC_MII100 -#define CONFIG_PHY_ADDR 0x00 -#define CONFIG_ENV_OVERWRITE 1 /* allow overwriting of ethaddr */ -/* use misc_init_r() to read ethaddr from I2C EEPROM (see CONFIG_SYS_I2C_EEPROM) */ -#define CONFIG_MISC_INIT_R 1 -#define CONFIG_MAC_OFFSET 0x35 /* MAC address offset in I2C EEPROM */ - -/* - * POST support - */ -#define CONFIG_POST (CONFIG_SYS_POST_MEMORY | CONFIG_SYS_POST_CPU) -#define MPC5XXX_SRAM_POST_SIZE (MPC5XXX_SRAM_SIZE - 4) -/* List of I2C addresses to be verified by POST */ -#define CONFIG_SYS_POST_I2C_ADDRS {CONFIG_SYS_I2C_SLAVE, \ - CONFIG_SYS_I2C_IO, \ - CONFIG_SYS_I2C_EEPROM} - -/* display image timestamps */ -#define CONFIG_TIMESTAMP 1 - -/* - * Autobooting - */ -#define CONFIG_PREBOOT "echo;" \ - "echo Type \"run net_nfs_fdt\" to mount root filesystem over NFS;" \ - "echo" -#undef CONFIG_BOOTARGS - -/* - * Default environment settings - */ -#define CONFIG_EXTRA_ENV_SETTINGS \ - "netdev=eth0\0" \ - "netmask=255.255.0.0\0" \ - "ipaddr=192.168.160.33\0" \ - "serverip=192.168.1.1\0" \ - "gatewayip=192.168.1.1\0" \ - "console=ttyPSC0\0" \ - "u-boot_addr=100000\0" \ - "kernel_addr=200000\0" \ - "kernel_addr_flash=fc0c0000\0" \ - "fdt_addr=400000\0" \ - "fdt_addr_flash=fc0a0000\0" \ - "ramdisk_addr=500000\0" \ - "rootpath=/opt/eldk-4.1/ppc_6xx\0" \ - "u-boot=/tftpboot/cm5200/u-boot.bin\0" \ - "bootfile_fdt=/tftpboot/cm5200/uImage\0" \ - "fdt_file=/tftpboot/cm5200/cm5200.dtb\0" \ - "load=tftp ${u-boot_addr} ${u-boot}\0" \ - "update=prot off fc000000 +${filesize}; " \ - "era fc000000 +${filesize}; " \ - "cp.b ${u-boot_addr} fc000000 ${filesize}; " \ - "prot on fc000000 +${filesize}\0" \ - "nfsargs=setenv bootargs root=/dev/nfs rw " \ - "nfsroot=${serverip}:${rootpath}\0" \ - "flashargs=setenv bootargs root=/dev/mtdblock5 rw\0" \ - "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \ - "addinit=setenv bootargs ${bootargs} init=/linuxrc\0" \ - "addcons=setenv bootargs ${bootargs} " \ - "console=${console},${baudrate}\0" \ - "addip=setenv bootargs ${bootargs} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:" \ - "${netmask}:${hostname}:${netdev}:off panic=1\0" \ - "flash_flash=run flashargs addinit addip addcons;" \ - "bootm ${kernel_addr_flash} - ${fdt_addr_flash}\0" \ - "net_nfs_fdt=tftp ${kernel_addr} ${bootfile_fdt}; " \ - "tftp ${fdt_addr} ${fdt_file}; run nfsargs addip " \ - "addcons; bootm ${kernel_addr} - ${fdt_addr}\0" \ - "" -#define CONFIG_BOOTCOMMAND "run flash_flash" - -/* - * Low level configuration - */ - -/* - * Clock configuration - */ -#define CONFIG_SYS_MPC5XXX_CLKIN 33000000 /* SYS_XTAL_IN = 33MHz */ -#define CONFIG_SYS_IPBCLK_EQUALS_XLBCLK 1 /* IPB = 133MHz */ - -/* - * Memory map - */ -#define CONFIG_SYS_MBAR 0xF0000000 -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_DEFAULT_MBAR 0x80000000 - -#define CONFIG_SYS_LOWBOOT 1 - -/* Use ON-Chip SRAM until RAM will be available */ -#define CONFIG_SYS_INIT_RAM_ADDR MPC5XXX_SRAM -#ifdef CONFIG_POST -/* preserve space for the post_word at end of on-chip SRAM */ -#define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_POST_SIZE -#else -#define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_SIZE -#endif - -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_BOARD_TYPES 1 /* we use board_type */ - -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_MONITOR_LEN (384 << 10) /* 384 kB for Monitor */ -#define CONFIG_SYS_MALLOC_LEN (256 << 10) /* 256 kB for malloc() */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* initial mem map for Linux */ - -/* - * Flash configuration - */ -#define CONFIG_SYS_FLASH_CFI 1 -#define CONFIG_FLASH_CFI_DRIVER 1 -#define CONFIG_SYS_FLASH_BASE 0xfc000000 -/* we need these despite using CFI */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of flash banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 256 /* max num of sectors on one chip */ -#define CONFIG_SYS_FLASH_SIZE 0x02000000 /* 32 MiB */ - -#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) -#define CONFIG_SYS_RAMBOOT 1 -#undef CONFIG_SYS_LOWBOOT -#endif - -/* - * Chip selects configuration - */ -/* Boot Chipselect */ -#define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE -#define CONFIG_SYS_BOOTCS_CFG 0x00087D31 /* for pci_clk = 33 MHz */ -/* use board_early_init_r to enable flash write in CS_BOOT */ -#define CONFIG_BOARD_EARLY_INIT_R - -/* Flash memory addressing */ -#define CONFIG_SYS_CS0_START CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_CS0_SIZE CONFIG_SYS_FLASH_SIZE - -/* No burst, dead cycle = 1 for CS0 (Flash) */ -#define CONFIG_SYS_CS_BURST 0x00000000 -#define CONFIG_SYS_CS_DEADCYCLE 0x00000001 - -/* - * SDRAM configuration - * settings for k4s561632E-xx75, assuming XLB = 132 MHz - */ -#define SDRAM_MODE 0x00CD0000 /* CASL 3, burst length 8 */ -#define SDRAM_CONTROL 0x514F0000 -#define SDRAM_CONFIG1 0xE2333900 -#define SDRAM_CONFIG2 0x8EE70000 - -/* - * MTD configuration - */ -#define CONFIG_CMD_MTDPARTS 1 -#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ -#define CONFIG_FLASH_CFI_MTD -#define MTDIDS_DEFAULT "nor0=cm5200-0" -#define MTDPARTS_DEFAULT "mtdparts=cm5200-0:" \ - "384k(uboot),128k(env)," \ - "128k(redund_env),128k(dtb)," \ - "2m(kernel),27904k(rootfs)," \ - "-(config)" - -/* - * RTC configuration - */ -#define CONFIG_RTC_MPC5200 1 /* use internal MPC5200 RTC */ - -/* - * USB configuration - */ -#define CONFIG_USB_OHCI 1 -#define CONFIG_USB_CLOCK 0x0001BBBB -#define CONFIG_USB_CONFIG 0x00001000 -/* Partitions (for USB) */ - -/* - * Invoke our last_stage_init function - needed by fwupdate - */ -#define CONFIG_LAST_STAGE_INIT 1 - -/* - * Environment settings - */ -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_SIZE 0x10000 -#define CONFIG_ENV_SECT_SIZE 0x20000 -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN) -/* Configuration of redundant environment */ -#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) - -/* - * Pin multiplexing configuration - */ - -/* - * CS1/GPIO_WKUP_6: GPIO (default) - * ALTs: CAN1 on I2C1, CAN2 on TIMER0/1 - * IRDA/PSC6: UART - * Ether: Ethernet 100Mbit with MD - * PCI_DIS: PCI controller disabled - * USB: USB - * PSC3: SPI with UART3 - * PSC2: UART - * PSC1: UART - */ -#define CONFIG_SYS_GPS_PORT_CONFIG 0x10559C44 - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP 1 /* undef to save memory */ -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_ALT_MEMTEST 1 -#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x03f00000 /* 1 .. 63 MiB in SDRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ - -/* - * Various low-level settings - */ -#define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI -#define CONFIG_SYS_HID0_FINAL HID0_ICE - -#define CONFIG_SYS_XLB_PIPELINING 1 /* enable transaction pipeling */ - -/* - * Cache Configuration - */ -#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ -#ifdef CONFIG_CMD_KGDB -#define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - -/* - * Flat Device Tree support - */ -#define OF_CPU "PowerPC,5200@0" -#define OF_SOC "soc5200@f0000000" -#define OF_TBCLK (bd->bi_busfreq / 4) -#define OF_STDOUT_PATH "/soc5200@f0000000/serial@2000" - -#endif /* __CONFIG_H */ diff --git a/include/configs/digsy_mtc.h b/include/configs/digsy_mtc.h deleted file mode 100644 index 6710507a8d..0000000000 --- a/include/configs/digsy_mtc.h +++ /dev/null @@ -1,410 +0,0 @@ -/* - * (C) Copyright 2003-2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * (C) Copyright 2005-2007 - * Modified for InterControl digsyMTC MPC5200 board by - * Frank Bodammer, GCD Hard- & Software GmbH, - * frank.bodammer@gcd-solutions.de - * - * (C) Copyright 2009 Semihalf - * Optimized for digsyMTC by: Grzegorz Bernacki <gjb@semihalf.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - */ - -#define CONFIG_MPC5200 1 /* This is an MPC5200 CPU */ -#define CONFIG_DIGSY_MTC 1 /* ... on InterControl digsyMTC board */ - -/* - * Valid values for CONFIG_SYS_TEXT_BASE are: - * 0xFFF00000 boot high (standard configuration) - * 0xFE000000 boot low - * 0x00100000 boot from RAM (for testing only) - */ -#ifndef CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_TEXT_BASE 0xFFF00000 /* Standard: boot high */ -#endif - -#define CONFIG_SYS_MPC5XXX_CLKIN 33000000 - -#define CONFIG_SYS_CACHELINE_SIZE 32 - -/* - * Serial console configuration - */ -#define CONFIG_PSC_CONSOLE 4 /* console is on PSC4 */ -#define CONFIG_SYS_BAUDRATE_TABLE \ - { 9600, 19200, 38400, 57600, 115200, 230400 } - -/* - * PCI Mapping: - * 0x40000000 - 0x4fffffff - PCI Memory - * 0x50000000 - 0x50ffffff - PCI IO Space - */ -#define CONFIG_PCI_SCAN_SHOW 1 -#define CONFIG_PCI_BOOTDELAY 250 - -#define CONFIG_PCI_MEM_BUS 0x40000000 -#define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS -#define CONFIG_PCI_MEM_SIZE 0x10000000 - -#define CONFIG_PCI_IO_BUS 0x50000000 -#define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS -#define CONFIG_PCI_IO_SIZE 0x01000000 - -#define CONFIG_BZIP2 - -/* - * Video - */ - -#ifdef CONFIG_VIDEO -#define CONFIG_VIDEO_MB862xx -#define CONFIG_VIDEO_MB862xx_ACCEL -#define CONFIG_VIDEO_CORALP -#define CONFIG_VIDEO_LOGO -#define CONFIG_VIDEO_BMP_LOGO -#define CONFIG_SPLASH_SCREEN -#define CONFIG_VIDEO_BMP_GZIP -#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE (2 << 20) /* decompressed img */ - -/* Coral-PA clock frequency, geo and other both 133MHz */ -#define CONFIG_SYS_MB862xx_CCF 0x00050000 -/* Video SDRAM parameters */ -#define CONFIG_SYS_MB862xx_MMR 0x11d7fa72 -#endif - -/* - * Command line configuration. - */ -#define CONFIG_CMD_PCI -#define CONFIG_CMD_REGINFO -#define CONFIG_CMD_SAVES - -#if (CONFIG_SYS_TEXT_BASE == 0xFF000000) -#define CONFIG_SYS_LOWBOOT 1 -#endif - -/* - * Autobooting - */ - -#undef CONFIG_BOOTARGS - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "fw_image=digsyMPC.img\0" \ - "mtcb_start=mtc led diag orange; run mtcb_1\0" \ - "mtcb_clearled=for x in user1 user2 usbpwr usbbusy; " \ - "do mtc led $x; done\0" \ - "mtcb_1=if mtc key; then run mtcb_clearled mtcb_update; " \ - "else run mtcb_fw; fi\0" \ - "mtcb_fw=if bootm ff000000; then echo FIRMWARE OK!; " \ - "else echo BAD FIRMWARE CRC!; mtc led diag red; fi\0" \ - "mtcb_update=mtc led user1 orange;" \ - "while mtc key; do ; done; run mtcb_2;\0" \ - "mtcb_2=mtc led user1 green 2; usb reset; run mtcb_usb1;\0" \ - "mtcb_usb1=if fatload usb 0 400000 script.img; " \ - "then run mtcb_doscript; else run mtcb_usb2; fi\0" \ - "mtcb_usb2=if fatload usb 0 400000 $fw_image; " \ - "then run mtcb_dousb; else run mtcb_ide; fi\0" \ - "mtcb_doscript=run mtcb_usbleds; mtc led user2 orange 2; " \ - "run mtcb_wait_flickr mtcb_ds_1;\0" \ - "mtcb_ds_1=if imi 400000; then mtc led usbbusy; " \ - "source 400000; else run mtcb_error; fi\0" \ - "mtcb_dousb=run mtcb_usbleds mtcb_wait_flickr mtcb_du_1;\0" \ - "mtcb_du_1=if imi 400000; then run mtcb_du_2; " \ - "else run mtcb_error; fi\0" \ - "mtcb_du_2=run mtcb_clear mtcb_prog; mtc led usbbusy; " \ - "run mtcb_checkfw\0" \ - "mtcb_checkfw=if imi ff000000; then run mtcb_success; " \ - "else run mtcb_error; fi\0" \ - "mtcb_waitkey=mtc key; until test $? -eq 0; do mtc key; done\0" \ - "mtcb_wait_flickr=run mtcb_waitkey mtcb_uledflckr\0" \ - "mtcb_usbleds=mtc led usbpwr green; mtc led usbbusy orange 1;\0"\ - "mtcb_uledflckr=mtc led user1 orange 11\0" \ - "mtcb_error=mtc led user1 red\0" \ - "mtcb_clear=erase ff000000 ff0fffff\0" \ - "mtcb_prog=cp.b 400000 ff000000 ${filesize}\0" \ - "mtcb_success=mtc led user1 green\0" \ - "mtcb_ide=if fatload ide 0 400000 $fw_image;" \ - "then run mtcb_doide; else run mtcb_error; fi\0" \ - "mtcb_doide=mtc led user2 green 1;" \ - "run mtcb_wait_flickr mtcb_di_1;\0" \ - "mtcb_di_1=if imi 400000; then run mtcb_di_2;" \ - "else run mtcb_error; fi\0" \ - "mtcb_di_2=run mtcb_clear; run mtcb_prog mtcb_checkfw\0" \ - "ramdisk_num_sector=16\0" \ - "flash_base=ff000000\0" \ - "flashdisk_size=e00000\0" \ - "env_sector=fff60000\0" \ - "flashdisk_start=ff100000\0" \ - "load_cmd=tftp 400000 digsyMPC.img\0" \ - "clear_cmd=erase ff000000 ff0fffff\0" \ - "flash_cmd=cp.b 400000 ff000000 ${filesize}\0" \ - "update_cmd=run load_cmd; " \ - "iminfo 400000; " \ - "run clear_cmd flash_cmd; " \ - "iminfo ff000000\0" \ - "spi_driver=yes\0" \ - "spi_watchdog=no\0" \ - "ftps_start=yes\0" \ - "ftps_user1=admin\0" \ - "ftps_pass1=admin\0" \ - "ftps_base1=/\0" \ - "ftps_home1=/\0" \ - "plc_sio_srv=no\0" \ - "plc_sio_baud=57600\0" \ - "plc_sio_parity=no\0" \ - "plc_sio_stop=1\0" \ - "plc_sio_com=2\0" \ - "plc_eth_srv=yes\0" \ - "plc_eth_port=1200\0" \ - "plc_root=/ide/\0" \ - "diag_level=0\0" \ - "webvisu=no\0" \ - "plc_can1_routing=no\0" \ - "plc_can1_baudrate=250\0" \ - "plc_can2_routing=no\0" \ - "plc_can2_baudrate=250\0" \ - "plc_can3_routing=no\0" \ - "plc_can3_baudrate=250\0" \ - "plc_can4_routing=no\0" \ - "plc_can4_baudrate=250\0" \ - "netdev=eth0\0" \ - "console=ttyPSC0\0" \ - "kernel_addr_r=400000\0" \ - "fdt_addr_r=600000\0" \ - "nfsargs=setenv bootargs root=/dev/nfs rw " \ - "nfsroot=${serverip}:${rootpath}\0" \ - "addip=setenv bootargs ${bootargs} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:" \ - "${netmask}:${hostname}:${netdev}:off panic=1\0" \ - "addcons=setenv bootargs ${bootargs} console=${console},${baudrate}\0"\ - "rootpath=/opt/eldk/ppc_6xx\0" \ - "net_nfs=tftp ${kernel_addr_r} ${bootfile};" \ - "tftp ${fdt_addr_r} ${fdt_file};" \ - "run nfsargs addip addcons;" \ - "bootm ${kernel_addr_r} - ${fdt_addr_r}\0" \ - "load=tftp 200000 ${u-boot}\0" \ - "update=protect off FFF00000 +${filesize};" \ - "erase FFF00000 +${filesize};" \ - "cp.b 200000 FFF00000 ${filesize};" \ - "protect on FFF00000 +${filesize}\0" \ - "" - -#define CONFIG_BOOTCOMMAND "run mtcb_start" - -/* - * Flash configuration - */ -#define CONFIG_SYS_FLASH_CFI 1 -#define CONFIG_FLASH_CFI_DRIVER 1 - -#if defined(CONFIG_DIGSY_REV5) -#define CONFIG_SYS_FLASH_BASE 0xFE000000 -#define CONFIG_SYS_FLASH_BASE_CS1 0xFC000000 -#define CONFIG_SYS_MAX_FLASH_BANKS 2 -#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE, \ - CONFIG_SYS_FLASH_BASE_CS1} -#define CONFIG_SYS_UPDATE_FLASH_SIZE -#define CONFIG_FDT_FIXUP_NOR_FLASH_SIZE -#else -#define CONFIG_SYS_FLASH_BASE 0xFF000000 -#define CONFIG_SYS_MAX_FLASH_BANKS 1 -#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE } -#endif - -#define CONFIG_SYS_MAX_FLASH_SECT 256 -#define CONFIG_FLASH_16BIT -#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT -#define CONFIG_SYS_FLASH_SIZE 0x01000000 -#define CONFIG_SYS_FLASH_ERASE_TOUT 240000 -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 - -#define OF_CPU "PowerPC,5200@0" -#define OF_SOC "soc5200@f0000000" -#define OF_TBCLK (bd->bi_busfreq / 4) - -#define CONFIG_BOARD_EARLY_INIT_R -#define CONFIG_MISC_INIT_R - -/* - * Environment settings - */ -#define CONFIG_ENV_IS_IN_FLASH 1 -#if defined(CONFIG_LOWBOOT) -#define CONFIG_ENV_ADDR 0xFF060000 -#else /* CONFIG_LOWBOOT */ -#define CONFIG_ENV_ADDR 0xFFF60000 -#endif /* CONFIG_LOWBOOT */ -#define CONFIG_ENV_SIZE 0x10000 -#define CONFIG_ENV_SECT_SIZE 0x20000 -#define CONFIG_ENV_OVERWRITE 1 - -/* - * Memory map - */ -#define CONFIG_SYS_MBAR 0xF0000000 -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#if !defined(CONFIG_SYS_LOWBOOT) -#define CONFIG_SYS_DEFAULT_MBAR 0x80000000 -#else -#define CONFIG_SYS_DEFAULT_MBAR 0xF0000000 -#endif - -/* - * Use SRAM until RAM will be available - */ -#define CONFIG_SYS_INIT_RAM_ADDR MPC5XXX_SRAM -#define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_SIZE - -#define CONFIG_SYS_GBL_DATA_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE -#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) -#define CONFIG_SYS_RAMBOOT 1 -#endif - -#define CONFIG_SYS_MONITOR_LEN (256 << 10) -#define CONFIG_SYS_MALLOC_LEN (4096 << 10) -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) - -/* - * Ethernet configuration - */ -#define CONFIG_MPC5xxx_FEC 1 -#define CONFIG_MPC5xxx_FEC_MII100 -#if defined(CONFIG_DIGSY_REV5) -#define CONFIG_PHY_ADDR 0x01 -#else -#define CONFIG_PHY_ADDR 0x00 -#endif -#define CONFIG_PHY_RESET_DELAY 1000 - -#define CONFIG_NETCONSOLE /* include NetConsole support */ - -/* - * GPIO configuration - * use pin gpio_wkup_6 as second SDRAM chip select (mem_cs1) - * Bit 0 (mask 0x80000000) : 0x1 - * SPI on Tmr2/3/4/5 pins - * Bit 2:3 (mask 0x30000000) : 0x2 - * ATA cs0/1 on csb_4/5 - * Bit 6:7 (mask 0x03000000) : 0x2 - * Ethernet 100Mbit with MD - * Bits 12:15 (mask 0x000f0000): 0x5 - * USB - Two UARTs - * Bits 18:19 (mask 0x00003000) : 0x2 - * PSC3 - USB2 on PSC3 - * Bits 20:23 (mask 0x00000f00) : 0x1 - * PSC2 - CAN1&2 on PSC2 pins - * Bits 25:27 (mask 0x00000070) : 0x1 - * PSC1 - AC97 functionality - * Bits 29:31 (mask 0x00000007) : 0x2 - */ -#define CONFIG_SYS_GPS_PORT_CONFIG 0xA2552112 - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP -#define CONFIG_AUTO_COMPLETE 1 -#define CONFIG_CMDLINE_EDITING 1 - -#define CONFIG_MX_CYCLIC 1 - -#define CONFIG_SYS_CBSIZE 1024 -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) -#define CONFIG_SYS_MAXARGS 32 -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE - -#define CONFIG_SYS_ALT_MEMTEST -#define CONFIG_SYS_MEMTEST_SCRATCH 0x00001000 -#define CONFIG_SYS_MEMTEST_START 0x00010000 -#define CONFIG_SYS_MEMTEST_END 0x019fffff - -#define CONFIG_SYS_LOAD_ADDR 0x00100000 - -/* - * Various low-level settings - */ -#define CONFIG_SYS_SDRAM_CS1 1 -#define CONFIG_SYS_XLB_PIPELINING 1 - -#define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI -#define CONFIG_SYS_HID0_FINAL HID0_ICE - -#if defined(CONFIG_SYS_LOWBOOT) -#define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE -#define CONFIG_SYS_BOOTCS_CFG 0x0002DD00 -#endif - -#define CONFIG_SYS_CS4_START 0x60000000 -#define CONFIG_SYS_CS4_SIZE 0x1000 -#define CONFIG_SYS_CS4_CFG 0x0008FC00 - -#define CONFIG_SYS_CS0_START CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_CS0_SIZE CONFIG_SYS_FLASH_SIZE -#define CONFIG_SYS_CS0_CFG 0x0002DD00 - -#if defined(CONFIG_DIGSY_REV5) -#define CONFIG_SYS_CS1_START CONFIG_SYS_FLASH_BASE_CS1 -#define CONFIG_SYS_CS1_SIZE CONFIG_SYS_FLASH_SIZE -#define CONFIG_SYS_CS1_CFG 0x0002DD00 -#endif - -#define CONFIG_SYS_CS_BURST 0x00000000 -#define CONFIG_SYS_CS_DEADCYCLE 0x11111111 - -#if !defined(CONFIG_SYS_LOWBOOT) -#define CONFIG_SYS_RESET_ADDRESS 0xfff00100 -#else -#define CONFIG_SYS_RESET_ADDRESS 0xff000100 -#endif - -/* - * USB - */ -#define CONFIG_USB_OHCI_NEW -#define CONFIG_SYS_OHCI_BE_CONTROLLER - -#define CONFIG_USB_CLOCK 0x00013333 -#define CONFIG_USB_CONFIG 0x00002000 - -#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 15 -#define CONFIG_SYS_USB_OHCI_REGS_BASE MPC5XXX_USB -#define CONFIG_SYS_USB_OHCI_SLOT_NAME "mpc5200" -#define CONFIG_SYS_USB_OHCI_CPU_INIT - -/* - * IDE/ATA - */ -#define CONFIG_IDE_RESET -#define CONFIG_IDE_PREINIT - -#define CONFIG_SYS_ATA_CS_ON_I2C2 -#define CONFIG_SYS_IDE_MAXBUS 1 -#define CONFIG_SYS_IDE_MAXDEVICE 1 - -#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000 -#define CONFIG_SYS_ATA_BASE_ADDR MPC5XXX_ATA -#define CONFIG_SYS_ATA_DATA_OFFSET (0x0060) -#define CONFIG_SYS_ATA_REG_OFFSET (CONFIG_SYS_ATA_DATA_OFFSET) -#define CONFIG_SYS_ATA_ALT_OFFSET (0x005C) -#define CONFIG_SYS_ATA_STRIDE 4 - -#define CONFIG_ATAPI 1 -#define CONFIG_LBA48 1 - -#endif /* __CONFIG_H */ diff --git a/include/configs/inka4x0.h b/include/configs/inka4x0.h deleted file mode 100644 index 2816522794..0000000000 --- a/include/configs/inka4x0.h +++ /dev/null @@ -1,306 +0,0 @@ -/* - * (C) Copyright 2009 - * Detlev Zundel, DENX Software Engineering, dzu@denx.de. - * - * (C) Copyright 2003-2005 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ - -#define CONFIG_MPC5200 1 /* This is an MPC5200 CPU */ -#define CONFIG_INKA4X0 1 /* INKA4x0 board */ - -/* - * Valid values for CONFIG_SYS_TEXT_BASE are: - * 0xFFE00000 boot low - * 0x00100000 boot from RAM (for testing only) - */ -#ifndef CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_TEXT_BASE 0xFFE00000 /* Standard: boot low */ -#endif -#define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc5xxx/u-boot-customlayout.lds" - -#define CONFIG_SYS_MPC5XXX_CLKIN 33000000 /* ... running at 33.000000MHz */ - -#define CONFIG_MISC_INIT_F 1 /* Use misc_init_f() */ - -#define CONFIG_HIGH_BATS 1 /* High BATs supported */ - -/* - * Serial console configuration - */ -#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } - -/* - * PCI Mapping: - * 0x40000000 - 0x4fffffff - PCI Memory - * 0x50000000 - 0x50ffffff - PCI IO Space - */ -#define CONFIG_PCI_SCAN_SHOW 1 -#define CONFIG_PCIAUTO_SKIP_HOST_BRIDGE 1 - -#define CONFIG_PCI_MEM_BUS 0x40000000 -#define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS -#define CONFIG_PCI_MEM_SIZE 0x10000000 - -#define CONFIG_PCI_IO_BUS 0x50000000 -#define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS -#define CONFIG_PCI_IO_SIZE 0x01000000 - -#define CONFIG_SYS_XLB_PIPELINING 1 - -/* Partitions */ - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - -/* - * Command line configuration. - */ -#define CONFIG_CMD_PCI - -#define CONFIG_TIMESTAMP 1 /* Print image info with timestamp */ - -#if (CONFIG_SYS_TEXT_BASE == 0xFFE00000) /* Boot low */ -# define CONFIG_SYS_LOWBOOT 1 -#endif - -/* - * Autobooting - */ - -#define CONFIG_PREBOOT "echo;" \ - "echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \ - "echo" - -#undef CONFIG_BOOTARGS - -#define CONFIG_IPADDR 192.168.100.2 -#define CONFIG_SERVERIP 192.168.100.1 -#define CONFIG_NETMASK 255.255.255.0 -#define HOSTNAME inka4x0 -#define CONFIG_BOOTFILE "/tftpboot/inka4x0/uImage" -#define CONFIG_ROOTPATH "/opt/eldk/ppc_6xx" - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "netdev=eth0\0" \ - "nfsargs=setenv bootargs root=/dev/nfs rw " \ - "nfsroot=${serverip}:${rootpath}\0" \ - "ramargs=setenv bootargs root=/dev/ram rw\0" \ - "addip=setenv bootargs ${bootargs} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ - ":${hostname}:${netdev}:off panic=1\0" \ - "addcons=setenv bootargs ${bootargs} " \ - "console=ttyS0,${baudrate}\0" \ - "flash_nfs=run nfsargs addip addcons;" \ - "bootm ${kernel_addr}\0" \ - "net_nfs=tftp 200000 ${bootfile};" \ - "run nfsargs addip addcons;bootm\0" \ - "enable_disp=mw.l 100000 04000000 1;" \ - "cp.l 100000 f0000b20 1;" \ - "cp.l 100000 f0000b28 1\0" \ - "ideargs=setenv bootargs root=/dev/hda1 rw\0" \ - "ide_boot=ext2load ide 0:1 200000 uImage;" \ - "run ideargs addip addcons enable_disp;bootm\0" \ - "brightness=255\0" \ - "" - -#define CONFIG_BOOTCOMMAND "run ide_boot" - -/* - * IPB Bus clocking configuration. - */ -#define CONFIG_SYS_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */ - -/* - * Flash configuration - */ -#define CONFIG_SYS_FLASH_CFI 1 /* Flash is CFI conformant */ -#define CONFIG_FLASH_CFI_DRIVER 1 -#define CONFIG_SYS_FLASH_BASE 0xffe00000 -#define CONFIG_SYS_FLASH_SIZE 0x00200000 -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of memory banks */ -#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE } -#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max num of sects on one chip */ -#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */ - -/* - * Environment settings - */ -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x4000) -#define CONFIG_ENV_SIZE 0x2000 -#define CONFIG_ENV_SECT_SIZE 0x2000 -#define CONFIG_ENV_OVERWRITE 1 -#define CONFIG_SYS_USE_PPCENV /* Environment embedded in sect .ppcenv */ - -/* - * Memory map - */ -#define CONFIG_SYS_MBAR 0xF0000000 -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_DEFAULT_MBAR 0x80000000 - -/* - * SDRAM controller configuration - */ -#undef CONFIG_SDR_MT48LC16M16A2 -#undef CONFIG_DDR_MT46V16M16 -#undef CONFIG_DDR_MT46V32M16 -#undef CONFIG_DDR_HYB25D512160BF -#define CONFIG_DDR_K4H511638C - -/* Use ON-Chip SRAM until RAM will be available */ -#define CONFIG_SYS_INIT_RAM_ADDR MPC5XXX_SRAM - -/* preserve space for the post_word at end of on-chip SRAM */ -#define MPC5XXX_SRAM_POST_SIZE (MPC5XXX_SRAM_SIZE - 4) - -#ifdef CONFIG_POST -#define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_POST_SIZE -#else -#define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_SIZE -#endif - -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE -#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) -# define CONFIG_SYS_RAMBOOT 1 -#endif - -#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ -#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ - -/* - * Ethernet configuration - */ -#define CONFIG_MPC5xxx_FEC 1 -#define CONFIG_MPC5xxx_FEC_MII100 -/* - * Define CONFIG_MPC5xxx_FEC_MII10 to force FEC at 10Mb - */ -/* #define CONFIG_MPC5xxx_FEC_MII10 */ -#define CONFIG_PHY_ADDR 0x00 -#define CONFIG_MII - -/* - * GPIO configuration - * - * use CS1 as gpio_wkup_6 output - * Bit 0 (mask: 0x80000000): 0 - * use ALT CAN position: Bits 2-3 (mask: 0x30000000): - * 00 -> No Alternatives, I2C1 is used for onboard EEPROM - * 01 -> CAN1 on I2C1, CAN2 on Tmr0/1 do not use on TQM5200 with onboard - * EEPROM - * use PSC1 as UART: Bits 28-31 (mask: 0x00000007): 0100 - * use PSC2 as UART: Bits 24-27 (mask: 0x00000070): 0100 - * use PSC3 as UART: Bits 20-23 (mask: 0x00000700): 0100 - * use PSC6 as UART: Bits 9-11 (mask: 0x00700000): 0101 - */ -#define CONFIG_SYS_GPS_PORT_CONFIG 0x01501444 - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ -#if defined(CONFIG_CMD_KGDB) -# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - -/* Enable an alternate, more extensive memory test */ -#define CONFIG_SYS_ALT_MEMTEST - -#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ - -/* - * Various low-level settings - */ -#define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI -#define CONFIG_SYS_HID0_FINAL HID0_ICE - -#define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE -#define CONFIG_SYS_BOOTCS_CFG 0x00087800 /* for pci_clk = 66 MHz */ -#define CONFIG_SYS_CS0_START CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_CS0_SIZE CONFIG_SYS_FLASH_SIZE - -/* 32Mbit SRAM @0x30000000 */ -#define CONFIG_SYS_CS1_START 0x30000000 -#define CONFIG_SYS_CS1_SIZE 0x00400000 -#define CONFIG_SYS_CS1_CFG 0x31800 /* for pci_clk = 33 MHz */ - -/* 2 quad UART @0x80000000 (MBAR is relocated to 0xF0000000) */ -#define CONFIG_SYS_CS2_START 0x80000000 -#define CONFIG_SYS_CS2_SIZE 0x0001000 -#define CONFIG_SYS_CS2_CFG 0x21800 /* for pci_clk = 33 MHz */ - -/* GPIO in @0x30400000 */ -#define CONFIG_SYS_CS3_START 0x30400000 -#define CONFIG_SYS_CS3_SIZE 0x00100000 -#define CONFIG_SYS_CS3_CFG 0x31800 /* for pci_clk = 33 MHz */ - -#define CONFIG_SYS_CS_BURST 0x00000000 -#define CONFIG_SYS_CS_DEADCYCLE 0x33333333 - -/*----------------------------------------------------------------------- - * USB stuff - *----------------------------------------------------------------------- - */ -#define CONFIG_USB_OHCI -#define CONFIG_USB_CLOCK 0x00015555 -#define CONFIG_USB_CONFIG 0x00001000 - -/*----------------------------------------------------------------------- - * IDE/ATA stuff Supports IDE harddisk - *----------------------------------------------------------------------- - */ -#undef CONFIG_IDE_LED /* LED for ide not supported */ - -#define CONFIG_IDE_PREINIT - -#define CONFIG_SYS_IDE_MAXBUS 1 /* max. 1 IDE bus */ -#define CONFIG_SYS_IDE_MAXDEVICE 2 /* max. 1 drive per IDE bus */ - -#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000 -#define CONFIG_SYS_ATA_BASE_ADDR MPC5XXX_ATA -#define CONFIG_SYS_ATA_DATA_OFFSET 0x0060 /* Offset for data I/O */ -#define CONFIG_SYS_ATA_REG_OFFSET (CONFIG_SYS_ATA_DATA_OFFSET) /* Offset for normal register accesses */ -#define CONFIG_SYS_ATA_ALT_OFFSET 0x005C /* Offset for alternate registers */ -#define CONFIG_SYS_ATA_STRIDE 4 /* Interval between registers */ - -#define CONFIG_ATAPI 1 - -#define CONFIG_SYS_BRIGHTNESS 0xFF /* LCD Default Brightness (255 = off) */ - -#endif /* __CONFIG_H */ diff --git a/include/configs/ipek01.h b/include/configs/ipek01.h deleted file mode 100644 index c6390dbdbe..0000000000 --- a/include/configs/ipek01.h +++ /dev/null @@ -1,321 +0,0 @@ -/* - * (C) Copyright 2006 - * MicroSys GmbH - * - * (C) Copyright 2009 - * Wolfgang Grandegger, DENX Software Engineering, wg@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - */ - -#define CONFIG_MPC5200 -#define CONFIG_MPX5200 1 /* MPX5200 board */ -#define CONFIG_MPC5200_DDR 1 /* use DDR RAM */ -#define CONFIG_IPEK01 /* Motherboard is ipek01 */ - -#define CONFIG_SYS_TEXT_BASE 0xfc000000 - -#define CONFIG_SYS_MPC5XXX_CLKIN 33000000 /* ... running at 33MHz */ - -#define CONFIG_MISC_INIT_R - -#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ -#ifdef CONFIG_CMD_KGDB -#define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - -/* - * Serial console configuration - */ -#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } - -#define CONFIG_CMDLINE_EDITING 1 /* add command line history */ - -/* - * Video configuration for LIME GDC - */ -#ifdef CONFIG_VIDEO -#define CONFIG_VIDEO_MB862xx -#define CONFIG_VIDEO_MB862xx_ACCEL -#define VIDEO_FB_16BPP_WORD_SWAP -#define CONFIG_VIDEO_LOGO -#define CONFIG_VIDEO_BMP_LOGO -#define CONFIG_SPLASH_SCREEN -#define CONFIG_VIDEO_BMP_GZIP -#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE (2 << 20) /* decompressed img */ -/* Lime clock frequency */ -#define CONFIG_SYS_MB862xx_CCF 0x90000 /* geo 166MHz other 133MHz */ -/* SDRAM parameter */ -#define CONFIG_SYS_MB862xx_MMR 0x41c767e3 -#endif - -/* - * PCI Mapping: - * 0x40000000 - 0x4fffffff - PCI Memory - * 0x50000000 - 0x50ffffff - PCI IO Space - */ -#define CONFIG_PCI_SCAN_SHOW 1 - -#define CONFIG_PCI_MEM_BUS 0x40000000 -#define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS -#define CONFIG_PCI_MEM_SIZE 0x10000000 - -#define CONFIG_PCI_IO_BUS 0x50000000 -#define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS -#define CONFIG_PCI_IO_SIZE 0x01000000 - -#define CONFIG_MII 1 -#define CONFIG_EEPRO100 1 -#define CONFIG_SYS_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */ - -/* USB */ -#define CONFIG_USB_OHCI_NEW -#define CONFIG_SYS_OHCI_BE_CONTROLLER - -#define CONFIG_SYS_USB_OHCI_CPU_INIT -#define CONFIG_SYS_USB_OHCI_REGS_BASE MPC5XXX_USB -#define CONFIG_SYS_USB_OHCI_SLOT_NAME "mpc5200" -#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 15 - -/* - * Command line configuration. - */ -#define CONFIG_CMD_PCI /* pciinfo */ - -#define CONFIG_SYS_LOWBOOT 1 - -/* - * Autobooting - */ - -#define CONFIG_PREBOOT "echo;" \ - "echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \ - "echo" - -#undef CONFIG_BOOTARGS - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "netdev=eth0\0" \ - "consoledev=ttyPSC0\0" \ - "hostname=ipek01\0" \ - "nfsargs=setenv bootargs root=/dev/nfs rw " \ - "nfsroot=${serverip}:${rootpath}\0" \ - "ramargs=setenv bootargs root=/dev/ram rw\0" \ - "addip=setenv bootargs ${bootargs} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ - ":${hostname}:${netdev}:off panic=1\0" \ - "addtty=setenv bootargs ${bootargs} " \ - "console=${consoledev},${baudrate}\0" \ - "flash_nfs=run nfsargs addip addtty;" \ - "bootm ${kernel_addr} - ${fdtaddr}\0" \ - "flash_self=run ramargs addip addtty;" \ - "bootm ${kernel_addr} ${ramdisk_addr} ${fdtaddr}\0" \ - "net_nfs=tftp 200000 ${bootfile}; tftp ${fdtaddr} ${fdtfile};" \ - "run nfsargs addip addtty;" \ - "bootm ${loadaddr} - ${fdtaddr}\0" \ - "rootpath=/opt/eldk/ppc_6xx\0" \ - "bootfile=ipek01/uImage\0" \ - "load=tftp 100000 ipek01/u-boot.bin\0" \ - "update=protect off FC000000 +60000; era FC000000 +60000; " \ - "cp.b 100000 FC000000 ${filesize}\0" \ - "upd=run load;run update\0" \ - "fdtaddr=800000\0" \ - "loadaddr=400000\0" \ - "fdtfile=ipek01/ipek01.dtb\0" \ - "" - -#define CONFIG_BOOTCOMMAND "run flash_self" - -/* - * IPB Bus clocking configuration. - */ -#define CONFIG_SYS_IPBCLK_EQUALS_XLBCLK /* for 133MHz */ -/* PCI clock must be 33, because board will not boot */ -#undef CONFIG_SYS_PCICLK_EQUALS_IPBCLK_DIV2 /* for 66MHz */ - -/* - * Open firmware flat tree support - */ -#define OF_CPU "PowerPC,5200@0" -#define OF_SOC "soc5200@f0000000" -#define OF_TBCLK (bd->bi_busfreq / 4) - -#define CONFIG_SYS_FLASH_BASE 0xFC000000 -#define CONFIG_SYS_FLASH_SIZE 0x01000000 -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + \ - CONFIG_SYS_MONITOR_LEN) - -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 256 /* max num of sects on one chip */ -#define CONFIG_SYS_FLASH_PROTECTION /* "Real" (hardware) sectors protection */ - -/* use CFI flash driver */ -#define CONFIG_FLASH_CFI_DRIVER -#define CONFIG_SYS_FLASH_CFI -#define CONFIG_SYS_FLASH_EMPTY_INFO -#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 - -/* - * Environment settings - */ -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_SIZE 0x10000 -#define CONFIG_ENV_SECT_SIZE 0x20000 -#define CONFIG_ENV_OVERWRITE 1 -#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE - -/* - * Memory map - */ -#define CONFIG_SYS_MBAR 0xf0000000 -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_DEFAULT_MBAR 0x80000000 -#define CONFIG_SYS_SRAM_BASE 0xF1000000 -#define CONFIG_SYS_SRAM_SIZE 0x00200000 -#define CONFIG_SYS_LIME_BASE 0xE4000000 -#define CONFIG_SYS_LIME_SIZE 0x04000000 -#define CONFIG_SYS_FPGA_BASE 0xC0000000 -#define CONFIG_SYS_FPGA_SIZE 0x10000000 -#define CONFIG_SYS_MPEG_BASE 0xe2000000 -#define CONFIG_SYS_MPEG_SIZE 0x01000000 -#define CONFIG_SYS_CF_BASE 0xe1000000 -#define CONFIG_SYS_CF_SIZE 0x01000000 - -/* Use SRAM until RAM will be available */ -#define CONFIG_SYS_INIT_RAM_ADDR MPC5XXX_SRAM -/* End of used area in DPRAM */ -#define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_SIZE - -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE -#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) -# define CONFIG_SYS_RAMBOOT 1 -#endif - -#define CONFIG_SYS_MONITOR_LEN (384 << 10) /* Reserve 384 kB for Monitor */ -#define CONFIG_SYS_MALLOC_LEN (4 << 20) /* Reserve 128 kB for malloc() */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ - -/* - * Ethernet configuration - */ -#define CONFIG_MPC5xxx_FEC 1 -#define CONFIG_MPC5xxx_FEC_MII100 -#define CONFIG_PHY_ADDR 0x00 - -/* - * GPIO configuration - */ -#define CONFIG_SYS_GPS_PORT_CONFIG 0x1d556624 - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#ifdef CONFIG_CMD_KGDB -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) -/* max number of command args */ -#define CONFIG_SYS_MAXARGS 16 -/* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE - -#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x00f00000 /* 1...15 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ - -/* - * Various low-level settings - */ -#define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI -#define CONFIG_SYS_HID0_FINAL HID0_ICE - -#define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE -#define CONFIG_SYS_CS0_START CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_CS0_SIZE CONFIG_SYS_FLASH_SIZE -#define CONFIG_SYS_CS1_START CONFIG_SYS_SRAM_BASE -#define CONFIG_SYS_CS1_SIZE CONFIG_SYS_SRAM_SIZE -#define CONFIG_SYS_CS3_START CONFIG_SYS_LIME_BASE -#define CONFIG_SYS_CS3_SIZE CONFIG_SYS_LIME_SIZE -#define CONFIG_SYS_CS6_START CONFIG_SYS_FPGA_BASE -#define CONFIG_SYS_CS6_SIZE CONFIG_SYS_FPGA_SIZE -#define CONFIG_SYS_CS5_START CONFIG_SYS_CF_BASE -#define CONFIG_SYS_CS5_SIZE CONFIG_SYS_CF_SIZE -#define CONFIG_SYS_CS7_START CONFIG_SYS_MPEG_BASE -#define CONFIG_SYS_CS7_SIZE CONFIG_SYS_MPEG_SIZE - -#ifdef CONFIG_SYS_PCISPEED_66 -#define CONFIG_SYS_BOOTCS_CFG 0x0006F900 -#define CONFIG_SYS_CS1_CFG 0x0004FB00 -#define CONFIG_SYS_CS2_CFG 0x0006F900 -#else -#define CONFIG_SYS_BOOTCS_CFG 0x0002F900 -#define CONFIG_SYS_CS1_CFG 0x0001FB00 -#define CONFIG_SYS_CS2_CFG 0x0002F90C -#endif - -/* - * Ack active, Muxed mode, AS=24 bit address, DS=32 bit data, 0 - * waitstates, writeswap and readswap enabled - */ -#define CONFIG_SYS_CS3_CFG 0x00FFFB0C -#define CONFIG_SYS_CS6_CFG 0x00FFFB0C -#define CONFIG_SYS_CS7_CFG 0x4040751C - -#define CONFIG_SYS_CS_BURST 0x00000000 -#define CONFIG_SYS_CS_DEADCYCLE 0x33330000 - -#define CONFIG_SYS_RESET_ADDRESS 0xff000000 - -/*----------------------------------------------------------------------- - * USB stuff - *----------------------------------------------------------------------- - */ -#define CONFIG_USB_CLOCK 0x0001BBBB -#define CONFIG_USB_CONFIG 0x00005000 - -/*----------------------------------------------------------------------- - * IDE/ATA stuff Supports IDE harddisk - *----------------------------------------------------------------------- - */ -#define CONFIG_IDE_PREINIT - -#define CONFIG_SYS_IDE_MAXBUS 1 /* max. 1 IDE bus */ -#define CONFIG_SYS_IDE_MAXDEVICE 2 /* max. 2 drives per IDE bus */ - -#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000 - -#define CONFIG_SYS_ATA_BASE_ADDR MPC5XXX_ATA - -/* Offset for data I/O */ -#define CONFIG_SYS_ATA_DATA_OFFSET (0x0060) - -/* Offset for normal register accesses */ -#define CONFIG_SYS_ATA_REG_OFFSET (CONFIG_SYS_ATA_DATA_OFFSET) - -/* Offset for alternate registers */ -#define CONFIG_SYS_ATA_ALT_OFFSET (0x005C) - -/* Interval between registers */ -#define CONFIG_SYS_ATA_STRIDE 4 - -#endif /* __CONFIG_H */ diff --git a/include/configs/jupiter.h b/include/configs/jupiter.h deleted file mode 100644 index 4461623118..0000000000 --- a/include/configs/jupiter.h +++ /dev/null @@ -1,246 +0,0 @@ -/* - * (C) Copyright 2007 - * Heiko Schocher, DENX Software Engineering, hs@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ - -#define CONFIG_MPC5200 1 /* This is an MPC5200 CPU */ -#define CONFIG_JUPITER 1 /* ... on Jupiter board */ - -/* - * Valid values for CONFIG_SYS_TEXT_BASE are: - * 0xFFF00000 boot high (standard configuration) - * 0x00100000 boot from RAM (for testing only) - */ -#ifndef CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_TEXT_BASE 0xFFF00000 -#endif - -#define CONFIG_SYS_MPC5XXX_CLKIN 33000000 /* ... running at 33.000000MHz */ - -#define CONFIG_BOARD_EARLY_INIT_R 1 - -#define CONFIG_HIGH_BATS 1 /* High BATs supported */ - -/* - * Serial console configuration - */ -#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } - -/* - * PCI Mapping: - * 0x40000000 - 0x4fffffff - PCI Memory - * 0x50000000 - 0x50ffffff - PCI IO Space - */ - -#if defined(CONFIG_PCI) -#define CONFIG_PCI_SCAN_SHOW 1 -#define CONFIG_PCIAUTO_SKIP_HOST_BRIDGE 1 - -#define CONFIG_PCI_MEM_BUS 0x40000000 -#define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS -#define CONFIG_PCI_MEM_SIZE 0x10000000 - -#define CONFIG_PCI_IO_BUS 0x50000000 -#define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS -#define CONFIG_PCI_IO_SIZE 0x01000000 -#endif - -#define CONFIG_SYS_XLB_PIPELINING 1 - -#define CONFIG_MII 1 -#define CONFIG_SYS_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */ - -/* Partitions */ - -#define CONFIG_TIMESTAMP /* Print image info with timestamp */ - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - -/* - * Command line configuration. - */ - -#if defined(CONFIG_PCI) -#define CODFIG_CMD_PCI -#endif - -/* - * Autobooting - */ - -#define CONFIG_PREBOOT "echo;" \ - "echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \ - "echo" - -#undef CONFIG_BOOTARGS - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "netdev=eth0\0" \ - "nfsargs=setenv bootargs root=/dev/nfs rw " \ - "nfsroot=${serverip}:${rootpath}\0" \ - "ramargs=setenv bootargs root=/dev/ram rw\0" \ - "addip=setenv bootargs ${bootargs} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ - ":${hostname}:${netdev}:off panic=1\0" \ - "flash_nfs=run nfsargs addip addcons;" \ - "bootm ${kernel_addr}\0" \ - "flash_self=run ramargs addip;" \ - "bootm ${kernel_addr} ${ramdisk_addr}\0" \ - "addcons=setenv bootargs ${bootargs} console=${contyp}," \ - "${baudrate}\0" \ - "contyp=ttyS0\0" \ - "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addcons;" \ - "bootm\0" \ - "rootpath=/opt/eldk/ppc_6xx\0" \ - "bootfile=/tftpboot/jupiter/uImage\0" \ - "" - -#define CONFIG_BOOTCOMMAND "run flash_self" - -/* - * IPB Bus clocking configuration. - */ -#undef CONFIG_SYS_IPBSPEED_133 /* define for 133MHz speed */ - -#if 0 -/* pass open firmware flat tree */ -#define OF_CPU "PowerPC,5200@0" -#define OF_SOC "soc5200@f0000000" -#define OF_TBCLK (bd->bi_busfreq / 8) -#define OF_STDOUT_PATH "/soc5200@f0000000/serial@2000" -#endif - -/* - * Flash configuration - */ -#define CONFIG_SYS_FLASH_BASE 0xFF000000 -#define CONFIG_SYS_FLASH_SIZE 0x01000000 - -#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max num of sects on one chip */ - -#define CONFIG_ENV_ADDR (CONFIG_SYS_TEXT_BASE + 0x40000) /* third sector */ - -#define CONFIG_SYS_FLASH_ERASE_TOUT 240000 /* Flash Erase Timeout (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */ - -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of flash banks */ - -#define CONFIG_FLASH_CFI_DRIVER -#define CONFIG_SYS_FLASH_CFI -#define CONFIG_SYS_FLASH_EMPTY_INFO -#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_8BIT -#define CONFIG_SYS_UPDATE_FLASH_SIZE 1 -#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 - -/* - * Environment settings - */ -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_SIZE 0x20000 -#define CONFIG_ENV_SECT_SIZE 0x20000 -#define CONFIG_ENV_OVERWRITE 1 - -/* Address and size of Redundant Environment Sector */ -#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) - -/* - * Memory map - */ -#define CONFIG_SYS_MBAR 0xF0000000 -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_DEFAULT_MBAR 0x80000000 - -/* Use SRAM until RAM will be available */ -#define CONFIG_SYS_INIT_RAM_ADDR MPC5XXX_SRAM -#define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_SIZE /* Size of used area in DPRAM */ - -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE -#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) -# define CONFIG_SYS_RAMBOOT 1 -#endif - -#define CONFIG_SYS_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */ -#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ - -/* - * Ethernet configuration - */ -#define CONFIG_MPC5xxx_FEC 1 -#define CONFIG_MPC5xxx_FEC_MII100 -/* - * Define CONFIG_MPC5xxx_FEC_MII10 to force FEC at 10Mb - */ -/* #define CONFIG_MPC5xxx_FEC_MII10 */ -#define CONFIG_PHY_ADDR 0x00 - -/* - * GPIO configuration - */ -#define CONFIG_SYS_GPS_PORT_CONFIG 0x10000004 - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ - -#define CONFIG_CMDLINE_EDITING 1 /* add command line history */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */ -#define CONFIG_SYS_ALT_MEMTEST 1 - -#define CONFIG_SYS_LOAD_ADDR 0x200000 /* default load address */ - -#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ -#if defined(CONFIG_CMD_KGDB) -# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - -/* - * Various low-level settings - */ -#define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI -#define CONFIG_SYS_HID0_FINAL HID0_ICE - -#define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE -#define CONFIG_SYS_BOOTCS_CFG 0x00047801 -#define CONFIG_SYS_CS0_START CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_CS0_SIZE CONFIG_SYS_FLASH_SIZE - -#define CONFIG_SYS_CS_BURST 0x00000000 -#define CONFIG_SYS_CS_DEADCYCLE 0x33333333 - -#define CONFIG_SYS_RESET_ADDRESS 0xff000000 - -#endif /* __CONFIG_H */ diff --git a/include/configs/manroland/mpc5200-common.h b/include/configs/manroland/mpc5200-common.h deleted file mode 100644 index 736bebbe1c..0000000000 --- a/include/configs/manroland/mpc5200-common.h +++ /dev/null @@ -1,173 +0,0 @@ -/* - * (C) Copyright 2009 - * Heiko Schocher, DENX Software Engineering, hs@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __MANROLAND_MPC52XX__COMMON_H -#define __MANROLAND_MPC52XX__COMMON_H - -/* - * High Level Configuration Options - * (easy to change) - */ -#define CONFIG_MPC5200 1 /* MPC5200 CPU */ - -/* ... running at 33.000000MHz */ -#define CONFIG_SYS_MPC5XXX_CLKIN 33000000 - -#define CONFIG_HIGH_BATS 1 /* High BATs supported */ - -/* - * Serial console configuration - */ -#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200,\ - 230400 } - -#if (CONFIG_SYS_TEXT_BASE == 0xFFF00000) /* Boot low */ -# define CONFIG_SYS_LOWBOOT 1 -#endif - -/* - * IPB Bus clocking configuration. - */ -#define CONFIG_SYS_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */ - -/* - * Flash configuration - */ -#define CONFIG_SYS_FLASH_BASE 0xFF800000 - -#define CONFIG_SYS_FLASH_SIZE 0x00800000 /* 8 MByte */ - -#define CONFIG_ENV_ADDR (CONFIG_SYS_TEXT_BASE+0x40000) /* second sector */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of flash banks - (= chip selects) */ -#define CONFIG_SYS_FLASH_ERASE_TOUT 240000 /* Flash Erase Timeout [ms]*/ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout [ms]*/ - -#define CONFIG_FLASH_CFI_DRIVER -#define CONFIG_SYS_FLASH_CFI -#define CONFIG_SYS_FLASH_EMPTY_INFO -#define CONFIG_SYS_FLASH_CFI_AMD_RESET - -/* - * Environment settings - */ -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_SIZE 0x4000 -#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET+CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) - -/* - * Memory map - */ -#define CONFIG_SYS_MBAR 0xF0000000 -#define CONFIG_SYS_DEFAULT_MBAR 0x80000000 - -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE -\ - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_SRAM_BASE 0x80100000 /* CS 1 */ -#define CONFIG_SYS_DISPLAY_BASE 0x80600000 /* CS 3 */ - -/* Settings for XLB = 132 MHz */ -#define SDRAM_DDR 1 -#define SDRAM_MODE 0x018D0000 -#define SDRAM_EMODE 0x40090000 -#define SDRAM_CONTROL 0x714f0f00 -#define SDRAM_CONFIG1 0x73722930 -#define SDRAM_CONFIG2 0x47770000 -#define SDRAM_TAPDELAY 0x10000000 - -/* Use ON-Chip SRAM until RAM will be available */ -#define CONFIG_SYS_INIT_RAM_ADDR MPC5XXX_SRAM -#ifdef CONFIG_POST -/* preserve space for the post_word at end of on-chip SRAM */ -#define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_POST_SIZE -#else -#define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_SIZE -#endif - -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE -#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) -# define CONFIG_SYS_RAMBOOT 1 -#endif - -#define CONFIG_SYS_MONITOR_LEN (192 << 10) -#define CONFIG_SYS_MALLOC_LEN (512 << 10) -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) - -/* - * Ethernet configuration - */ -#define CONFIG_MPC5xxx_FEC 1 -#define CONFIG_MPC5xxx_FEC_MII100 -#define CONFIG_PHY_ADDR 0x00 -#define CONFIG_MII 1 - -/*use Hardware WDT */ -#define CONFIG_HW_WATCHDOG - -#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ -#if defined(CONFIG_CMD_KGDB) -# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - -/* - * Various low-level settings - */ -#define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI -#define CONFIG_SYS_HID0_FINAL HID0_ICE - -#define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE -#define CONFIG_SYS_CS0_START CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_CS0_SIZE CONFIG_SYS_FLASH_SIZE - -/* 8Mbit SRAM @0x80100000 */ -#define CONFIG_SYS_CS1_START CONFIG_SYS_SRAM_BASE - -#define CONFIG_SYS_CS_BURST 0x00000000 -#define CONFIG_SYS_CS_DEADCYCLE 0x33333333 - -/*----------------------------------------------------------------------- - * IDE/ATA stuff Supports IDE harddisk - *----------------------------------------------------------------------- - */ - -#undef CONFIG_IDE_LED /* LED for ide not supported */ - -#define CONFIG_SYS_IDE_MAXBUS 1 /* max. 1 IDE bus */ - -#define CONFIG_IDE_PREINIT 1 - -#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000 - -#define CONFIG_SYS_ATA_BASE_ADDR MPC5XXX_ATA - -/* Offset for data I/O */ -#define CONFIG_SYS_ATA_DATA_OFFSET (0x0060) - -/* Offset for normal register accesses */ -#define CONFIG_SYS_ATA_REG_OFFSET (CONFIG_SYS_ATA_DATA_OFFSET) - -/* Offset for alternate registers */ -#define CONFIG_SYS_ATA_ALT_OFFSET (0x005C) - -/* Interval between registers */ -#define CONFIG_SYS_ATA_STRIDE 4 - -#define CONFIG_ATAPI 1 - -#define OF_CPU "PowerPC,5200@0" -#define OF_SOC "soc5200@f0000000" -#define OF_TBCLK (bd->bi_busfreq / 4) -#define OF_STDOUT_PATH "/soc5200@f0000000/serial@2000" -#define CONFIG_OF_IDE_FIXUP - -#endif /* __MANROLAND_MPC52XX__COMMON_H */ diff --git a/include/configs/mecp5123.h b/include/configs/mecp5123.h deleted file mode 100644 index 17a97dfc3a..0000000000 --- a/include/configs/mecp5123.h +++ /dev/null @@ -1,398 +0,0 @@ -/* - * (C) Copyright 2009 Wolfgang Denk <wd@denx.de> - * (C) Copyright 2009, DAVE Srl <www.dave.eu> - * - * SPDX-License-Identifier: GPL-2.0+ - * modifications for the MECP5123 by reinhard.arlt@esd-electronics.com - * - */ - -/* - * MECP5123 board configuration file - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#define CONFIG_MECP5123 1 - -/* - * Memory map for the MECP5123 board: - * - * 0x0000_0000 - 0x1FFF_FFFF DDR RAM (512 MB) - * 0x3000_0000 - 0x3001_FFFF SRAM (128 KB) - * 0x8000_0000 - 0x803F_FFFF IMMR (4 MB) - * 0x8200_0000 - 0x8200_FFFF VPC-3 (64 KB) - * 0xFFC0_0000 - 0xFFFF_FFFF NOR Boot FLASH (64 MB) - */ - -/* - * High Level Configuration Options - */ -#define CONFIG_E300 1 /* E300 Family */ - -#define CONFIG_SYS_TEXT_BASE 0xFFF00000 - -#define CONFIG_SYS_MPC512X_CLKIN 33333333 /* in Hz */ - -#define CONFIG_MISC_INIT_R - -#define CONFIG_SYS_IMMR 0x80000000 -#define CONFIG_SYS_DIU_ADDR (CONFIG_SYS_IMMR+0x2100) - -#define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest region */ -#define CONFIG_SYS_MEMTEST_END 0x00400000 - -/* - * DDR Setup - manually set all parameters as there's no SPD etc. - */ -#define CONFIG_SYS_DDR_SIZE 512 /* MB */ - -#define CONFIG_SYS_DDR_BASE 0x00000000 /* DDR is sys memory*/ -#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_BASE -#define CONFIG_SYS_MAX_RAM_SIZE 0x20000000 - -#define CONFIG_SYS_IOCTRL_MUX_DDR 0x00000036 - -/* DDR Controller Configuration - * - * SYS_CFG: - * [31:31] MDDRC Soft Reset: Diabled - * [30:30] DRAM CKE pin: Enabled - * [29:29] DRAM CLK: Enabled - * [28:28] Command Mode: Enabled (For initialization only) - * [27:25] DRAM Row Select: dram_row[15:0] = magenta_address[25:10] - * [24:21] DRAM Bank Select: dram_bank[1:0] = magenta_address[11:10] - * [20:19] Read Test: DON'T USE - * [18:18] Self Refresh: Enabled - * [17:17] 16bit Mode: Disabled - * [16:13] Ready Delay: 2 - * [12:12] Half DQS Delay: Disabled - * [11:11] Quarter DQS Delay: Disabled - * [10:08] Write Delay: 2 - * [07:07] Early ODT: Disabled - * [06:06] On DIE Termination: Disabled - * [05:05] FIFO Overflow Clear: DON'T USE here - * [04:04] FIFO Underflow Clear: DON'T USE here - * [03:03] FIFO Overflow Pending: DON'T USE here - * [02:02] FIFO Underlfow Pending: DON'T USE here - * [01:01] FIFO Overlfow Enabled: Enabled - * [00:00] FIFO Underflow Enabled: Enabled - * TIME_CFG0 - * [31:16] DRAM Refresh Time: 0 CSB clocks - * [15:8] DRAM Command Time: 0 CSB clocks - * [07:00] DRAM Precharge Time: 0 CSB clocks - * TIME_CFG1 - * [31:26] DRAM tRFC: - * [25:21] DRAM tWR1: - * [20:17] DRAM tWRT1: - * [16:11] DRAM tDRR: - * [10:05] DRAM tRC: - * [04:00] DRAM tRAS: - * TIME_CFG2 - * [31:28] DRAM tRCD: - * [27:23] DRAM tFAW: - * [22:19] DRAM tRTW1: - * [18:15] DRAM tCCD: - * [14:10] DRAM tRTP: - * [09:05] DRAM tRP: - * [04:00] DRAM tRPA - */ -#define CONFIG_SYS_MDDRC_SYS_CFG 0xEA804A00 -#define CONFIG_SYS_MDDRC_TIME_CFG0 0x06183D2E -#define CONFIG_SYS_MDDRC_TIME_CFG1 0x68EC1168 -#define CONFIG_SYS_MDDRC_TIME_CFG2 0x34310864 - -#define CONFIG_SYS_DDRCMD_NOP 0x01380000 -#define CONFIG_SYS_DDRCMD_PCHG_ALL 0x01100400 -#define CONFIG_SYS_DDRCMD_EM2 0x01020000 -#define CONFIG_SYS_DDRCMD_EM3 0x01030000 -#define CONFIG_SYS_DDRCMD_EN_DLL 0x01010000 -#define CONFIG_SYS_DDRCMD_RFSH 0x01080000 -#define CONFIG_SYS_MICRON_INIT_DEV_OP 0x01000432 -#define CONFIG_SYS_DDRCMD_OCD_DEFAULT 0x01010780 - -/* DDR Priority Manager Configuration */ -#define CONFIG_SYS_MDDRCGRP_PM_CFG1 0x00077777 -#define CONFIG_SYS_MDDRCGRP_PM_CFG2 0x00000000 -#define CONFIG_SYS_MDDRCGRP_HIPRIO_CFG 0x00000001 -#define CONFIG_SYS_MDDRCGRP_LUT0_MU 0xFFEEDDCC -#define CONFIG_SYS_MDDRCGRP_LUT0_ML 0xBBAAAAAA -#define CONFIG_SYS_MDDRCGRP_LUT1_MU 0x66666666 -#define CONFIG_SYS_MDDRCGRP_LUT1_ML 0x55555555 -#define CONFIG_SYS_MDDRCGRP_LUT2_MU 0x44444444 -#define CONFIG_SYS_MDDRCGRP_LUT2_ML 0x44444444 -#define CONFIG_SYS_MDDRCGRP_LUT3_MU 0x55555555 -#define CONFIG_SYS_MDDRCGRP_LUT3_ML 0x55555558 -#define CONFIG_SYS_MDDRCGRP_LUT4_MU 0x11111111 -#define CONFIG_SYS_MDDRCGRP_LUT4_ML 0x11111122 -#define CONFIG_SYS_MDDRCGRP_LUT0_AU 0xaaaaaaaa -#define CONFIG_SYS_MDDRCGRP_LUT0_AL 0xaaaaaaaa -#define CONFIG_SYS_MDDRCGRP_LUT1_AU 0x66666666 -#define CONFIG_SYS_MDDRCGRP_LUT1_AL 0x66666666 -#define CONFIG_SYS_MDDRCGRP_LUT2_AU 0x11111111 -#define CONFIG_SYS_MDDRCGRP_LUT2_AL 0x11111111 -#define CONFIG_SYS_MDDRCGRP_LUT3_AU 0x11111111 -#define CONFIG_SYS_MDDRCGRP_LUT3_AL 0x11111111 -#define CONFIG_SYS_MDDRCGRP_LUT4_AU 0x11111111 -#define CONFIG_SYS_MDDRCGRP_LUT4_AL 0x11111111 - -/* - * NOR FLASH on the Local Bus - */ -#define CONFIG_SYS_FLASH_CFI /* use the Common Flash Interface */ -#define CONFIG_FLASH_CFI_DRIVER /* use the CFI driver */ - -#define CONFIG_SYS_FLASH_BASE 0xFFC00000 /* start of FLASH */ -#define CONFIG_SYS_FLASH_SIZE 0x00400000 /* max flash size */ - -#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ -#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE} -#define CONFIG_SYS_MAX_FLASH_SECT 256 /* max sectors per device */ - -#undef CONFIG_SYS_FLASH_CHECKSUM - -/* - * NAND FLASH - * drivers/mtd/nand/mpc5121_nfc.c (rev 2 silicon only) - */ -#define CONFIG_CMD_NAND -#define CONFIG_NAND_MPC5121_NFC -#define CONFIG_SYS_NAND_BASE 0x40000000 -#define CONFIG_SYS_MAX_NAND_DEVICE 1 - -/* - * Configuration parameters for MPC5121 NAND driver - */ -#define CONFIG_FSL_NFC_WIDTH 1 -#define CONFIG_FSL_NFC_WRITE_SIZE 2048 -#define CONFIG_FSL_NFC_SPARE_SIZE 64 -#define CONFIG_FSL_NFC_CHIPS 1 - -#define CONFIG_SYS_SRAM_BASE 0x30000000 -#define CONFIG_SYS_SRAM_SIZE 0x00020000 /* 128 KB */ - -/* Initialize Local Window for NOR FLASH access */ -#define CONFIG_SYS_CS0_START CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_CS0_SIZE CONFIG_SYS_FLASH_SIZE - -/* ALE active low, data size 4bytes */ -#define CONFIG_SYS_CS0_CFG 0x05051150 - -/* Use not alternative CS timing */ -#define CONFIG_SYS_CS_ALETIMING 0x00000000 - -/* ALE active low, data size 4bytes */ -#define CONFIG_SYS_CS1_CFG 0x1f1f3090 -#define CONFIG_SYS_VPC3_BASE 0x82000000 /* start of VPC3 space */ -#define CONFIG_SYS_VPC3_SIZE 0x00010000 /* max VPC3 size */ -/* Initialize Local Window for VPC3 access */ -#define CONFIG_SYS_CS1_START CONFIG_SYS_VPC3_BASE -#define CONFIG_SYS_CS1_SIZE CONFIG_SYS_VPC3_SIZE - -/* Use SRAM for initial stack */ -#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_SRAM_BASE /* Init RAM addr */ -#define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_SRAM_SIZE - -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* Start of monitor */ -#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Monitor length */ -#define CONFIG_SYS_MALLOC_LEN (6 * 1024 * 1024) /* Malloc size */ - -/* - * Serial Port - */ -#define CONFIG_CONS_INDEX 1 - -/* - * Serial console configuration - */ -#define CONFIG_PSC_CONSOLE 3 /* console is on PSC3 */ -#define CONFIG_SYS_PSC3 -#if CONFIG_PSC_CONSOLE != 3 -#error CONFIG_PSC_CONSOLE must be 3 -#endif -#define CONFIG_SYS_BAUDRATE_TABLE \ - {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200} - -#define CONSOLE_FIFO_TX_SIZE FIFOC_PSC3_TX_SIZE -#define CONSOLE_FIFO_TX_ADDR FIFOC_PSC3_TX_ADDR -#define CONSOLE_FIFO_RX_SIZE FIFOC_PSC3_RX_SIZE -#define CONSOLE_FIFO_RX_ADDR FIFOC_PSC3_RX_ADDR - -/* - * Clocks in use - */ -#define SCCR1_CLOCKS_EN (CLOCK_SCCR1_CFG_EN | \ - CLOCK_SCCR1_LPC_EN | \ - CLOCK_SCCR1_PSC_EN(CONFIG_PSC_CONSOLE) | \ - CLOCK_SCCR1_PSCFIFO_EN | \ - CLOCK_SCCR1_DDR_EN | \ - CLOCK_SCCR1_FEC_EN | \ - CLOCK_SCCR1_NFC_EN | \ - CLOCK_SCCR1_PCI_EN | \ - CLOCK_SCCR1_TPR_EN) - -#define SCCR2_CLOCKS_EN (CLOCK_SCCR2_MEM_EN | \ - CLOCK_SCCR2_I2C_EN) - -#define CONFIG_CMDLINE_EDITING 1 /* add command line history */ - -/* - * IIM - IC Identification Module - */ -#undef CONFIG_FSL_IIM - -/* - * Ethernet configuration - */ -#define CONFIG_MPC512x_FEC 1 -#define CONFIG_PHY_ADDR 0x1 -#define CONFIG_MII 1 /* MII PHY management */ -#define CONFIG_FEC_AN_TIMEOUT 1 -#define CONFIG_HAS_ETH0 - -/* - * Configure on-board RTC - */ -#define CONFIG_SYS_RTC_BUS_NUM 0x01 -#define CONFIG_SYS_I2C_RTC_ADDR 0x32 -#define CONFIG_RTC_RX8025 - -/* - * Environment - */ -#define CONFIG_ENV_IS_NOWHERE /* Store env in I2C EEPROM */ -#define CONFIG_ENV_SIZE 0x1000 -#define CONFIG_ENV_OFFSET 0x0000 /* environment starts here */ - -#define CONFIG_LOADS_ECHO /* echo on for serial download */ -#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ - -#define CONFIG_CMD_REGINFO - -/* - * Watchdog timeout = CONFIG_SYS_WATCHDOG_VALUE * 65536 / IPS clock. - * For example, when IPS is set to 66MHz and CONFIG_SYS_WATCHDOG_VALUE is set - * to 0xFFFF, watchdog timeouts after about 64s. For details refer - * to chapter 36 of the MPC5121e Reference Manual. - */ -/* #define CONFIG_WATCHDOG */ /* enable watchdog */ -#define CONFIG_SYS_WATCHDOG_VALUE 0xFFFF - - /* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ - -#ifdef CONFIG_CMD_KGDB -# define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -# define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif - -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) -/* max number of command args */ -#define CONFIG_SYS_MAXARGS 32 -/* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE - -/* - * For booting Linux, the board info and command line data - * have to be in the first 256 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (256 << 20) /* Linux initial memory map */ - -/* Cache Configuration */ -#define CONFIG_SYS_DCACHE_SIZE 32768 -#define CONFIG_SYS_CACHELINE_SIZE 32 -#ifdef CONFIG_CMD_KGDB -#define CONFIG_SYS_CACHELINE_SHIFT 5 -#endif - -#define CONFIG_SYS_HID0_INIT 0x000000000 -#define CONFIG_SYS_HID0_FINAL HID0_ENABLE_MACHINE_CHECK -#define CONFIG_SYS_HID2 HID2_HBE - -#define CONFIG_HIGH_BATS 1 /* High BATs supported */ - -#ifdef CONFIG_CMD_KGDB -#define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */ -#endif - -/* - * Environment Configuration - */ -#define CONFIG_TIMESTAMP - -#define CONFIG_HOSTNAME mecp512x -#define CONFIG_BOOTFILE "/tftpboot/mecp512x/uImage" -#define CONFIG_ROOTPATH "/tftpboot/mecp512x/target_root" - -#define CONFIG_LOADADDR 400000 /* def. location for tftp and bootm */ - -#undef CONFIG_BOOTARGS /* the boot command will set bootargs*/ - -#define CONFIG_PREBOOT "echo;" \ - "echo Welcome to MECP5123" \ - "echo" - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "u-boot_addr_r=200000\0" \ - "kernel_addr_r=600000\0" \ - "fdt_addr_r=880000\0" \ - "ramdisk_addr_r=900000\0" \ - "u-boot_addr=FFF00000\0" \ - "kernel_addr=FFC40000\0" \ - "fdt_addr=FFEC0000\0" \ - "ramdisk_addr=FC040000\0" \ - "ramdiskfile=/tftpboot/mecp512x/uRamdisk\0" \ - "u-boot=/tftpboot/mecp512x/u-boot.bin\0" \ - "bootfile=/tftpboot/mecp512x/uImage\0" \ - "fdtfile=/tftpboot/mecp512x/mecp512x.dtb\0" \ - "rootpath=/tftpboot/mecp512x/target_root\n" \ - "netdev=eth0\0" \ - "consdev=ttyPSC0\0" \ - "nfsargs=setenv bootargs root=/dev/nfs rw " \ - "nfsroot=${serverip}:${rootpath}\0" \ - "ramargs=setenv bootargs root=/dev/ram rw\0" \ - "addip=setenv bootargs ${bootargs} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ - ":${hostname}:${netdev}:off panic=1\0" \ - "addtty=setenv bootargs ${bootargs} " \ - "console=${consdev},${baudrate}\0" \ - "flash_nfs=run nfsargs addip addtty;" \ - "bootm ${kernel_addr} - ${fdt_addr}\0" \ - "flash_self=run ramargs addip addtty;" \ - "bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \ - "net_nfs=tftp ${kernel_addr_r} ${bootfile};" \ - "tftp ${fdt_addr_r} ${fdtfile};" \ - "run nfsargs addip addtty;" \ - "bootm ${kernel_addr_r} - ${fdt_addr_r}\0" \ - "net_self=tftp ${kernel_addr_r} ${bootfile};" \ - "tftp ${ramdisk_addr_r} ${ramdiskfile};" \ - "tftp ${fdt_addr_r} ${fdtfile};" \ - "run ramargs addip addtty;" \ - "bootm ${kernel_addr_r} ${ramdisk_addr_r} ${fdt_addr_r}\0"\ - "load=tftp ${u-boot_addr_r} ${u-boot}\0" \ - "update=protect off ${u-boot_addr} +${filesize};" \ - "era ${u-boot_addr} +${filesize};" \ - "cp.b ${u-boot_addr_r} ${u-boot_addr} ${filesize}\0" \ - "upd=run load update\0" \ - "" - -#define CONFIG_BOOTCOMMAND "run flash_self" - -#define OF_CPU "PowerPC,5121@0" -#define OF_SOC_COMPAT "fsl,mpc5121-immr" -#define OF_TBCLK (bd->bi_busfreq / 4) -#define OF_STDOUT_PATH "/soc@80000000/serial@11300" - -#endif /* __CONFIG_H */ diff --git a/include/configs/motionpro.h b/include/configs/motionpro.h deleted file mode 100644 index 75633f66ef..0000000000 --- a/include/configs/motionpro.h +++ /dev/null @@ -1,329 +0,0 @@ -/* - * (C) Copyright 2003-2007 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * Based on Motion-PRO board config file by Robert McCullough, rob@promessinc.com - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - */ - -/* CPU and board */ -#define CONFIG_MPC5200 1 /* This is a MPC5200 CPU */ -#define CONFIG_MOTIONPRO 1 /* ... on Promess Motion-PRO board */ - -#define CONFIG_HIGH_BATS 1 /* High BATs supported */ - -#define CONFIG_SYS_TEXT_BASE 0xfff00000 - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - -/* - * Command line configuration. - */ -#define CONFIG_CMD_REGINFO - -/* - * Serial console configuration - */ -#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */ -#define CONFIG_NETCONSOLE 1 /* network console */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } - -/* - * Ethernet configuration - */ -#define CONFIG_MPC5xxx_FEC 1 -#define CONFIG_MPC5xxx_FEC_MII100 -#define CONFIG_PHY_ADDR 0x2 -#define CONFIG_PHY_TYPE 0x79c874 -#define CONFIG_RESET_PHY_R 1 - -/* - * Autobooting - */ -#undef CONFIG_BOOTARGS - -#define CONFIG_CMDLINE_EDITING 1 /* add command line history */ - -/* - * Default environment settings - */ -#define CONFIG_EXTRA_ENV_SETTINGS \ - "netdev=eth0\0" \ - "hostname=motionpro\0" \ - "netmask=255.255.255.0\0" \ - "ipaddr=192.168.1.106\0" \ - "serverip=192.168.1.100\0" \ - "gatewayip=192.168.1.100\0" \ - "console=ttyPSC0,115200\0" \ - "u-boot_addr=400000\0" \ - "kernel_addr=400000\0" \ - "fdt_addr=700000\0" \ - "ramdisk_addr=800000\0" \ - "multi_image_addr=800000\0" \ - "rootpath=/opt/eldk-4.2/ppc_6xx\0" \ - "u-boot=/tftpboot/motionpro/u-boot.bin\0" \ - "bootfile=/tftpboot/motionpro/uImage\0" \ - "fdt_file=/tftpboot/motionpro/motionpro.dtb\0" \ - "ramdisk_file=/tftpboot/motionpro/uRamdisk\0" \ - "multi_image_file=kernel+initrd+dtb.img\0" \ - "load=tftp ${u-boot_addr} ${u-boot}\0" \ - "update=prot off fff00000 +${filesize};" \ - "era fff00000 +${filesize}; " \ - "cp.b ${u-boot_addr} fff00000 ${filesize};" \ - "prot on fff00000 +${filesize}\0" \ - "ramargs=setenv bootargs root=/dev/ram rw\0" \ - "nfsargs=setenv bootargs root=/dev/nfs rw " \ - "nfsroot=${serverip}:${rootpath}\0" \ - "fat_args=setenv bootargs root=/dev/sda rw\0" \ - "mtdids=nor0=ff000000.flash\0" \ - "mtdparts=ff000000.flash:13m(fs),2m(kernel),384k(uboot)," \ - "128k(env),128k(redund_env)," \ - "128k(dtb),128k(user_data)\0" \ - "addcons=setenv bootargs ${bootargs} console=${console}\0" \ - "addmtd=setenv bootargs ${bootargs} mtdparts=${mtdparts}\0" \ - "addip=setenv bootargs ${bootargs} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:" \ - "${netmask}:${hostname}:${netdev}:off panic=1 " \ - "console=${console}\0" \ - "net_nfs=tftp ${kernel_addr} ${bootfile}; " \ - "tftp ${fdt_addr} ${fdt_file}; " \ - "run nfsargs addip addmtd; " \ - "bootm ${kernel_addr} - ${fdt_addr}\0" \ - "net_self=tftp ${kernel_addr} ${bootfile}; " \ - "tftp ${fdt_addr} ${fdt_file}; " \ - "tftp ${ramdisk_addr} ${ramdisk_file}; " \ - "nfs ${ramdisk_addr} ${serverip}:${rootpath}/images/uRamdisk; " \ - "run ramargs addip addcons addmtd; " \ - "bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \ - "fat_multi=run fat_args addip addmtd; fatload ide 0:1 " \ - "${multi_image_addr} ${multi_image_file}; " \ - "bootm ${multi_image_addr}\0" \ - "" -#define CONFIG_BOOTCOMMAND "run fat_multi" - -/* - * do board-specific init - */ -#define CONFIG_BOARD_EARLY_INIT_R 1 - -/* - * Low level configuration - */ - -/* - * Clock configuration: SYS_XTALIN = 33MHz - */ -#define CONFIG_SYS_MPC5XXX_CLKIN 33000000 - -/* - * Set IPB speed to 100MHz - */ -#define CONFIG_SYS_IPBCLK_EQUALS_XLBCLK - -/* - * Memory map - */ -/* - * Warning!!! with the current BestComm Task, MBAR MUST BE set to 0xf0000000. - * Setting MBAR to otherwise will cause system hang when using SmartDMA such - * as network commands. - */ -#define CONFIG_SYS_MBAR 0xf0000000 -#define CONFIG_SYS_SDRAM_BASE 0x00000000 - -/* - * If building for running out of SDRAM, then MBAR has been set up beforehand - * (e.g., by the BDI). Otherwise we must specify the default boot-up value of - * MBAR, as given in the doccumentation. - */ -#if CONFIG_SYS_TEXT_BASE == 0x00100000 -#define CONFIG_SYS_DEFAULT_MBAR 0xf0000000 -#else /* CONFIG_SYS_TEXT_BASE != 0x00100000 */ -#define CONFIG_SYS_DEFAULT_MBAR 0x80000000 -#define CONFIG_SYS_LOWBOOT 1 -#endif /* CONFIG_SYS_TEXT_BASE == 0x00100000 */ - -/* Use SRAM until RAM will be available */ -#define CONFIG_SYS_INIT_RAM_ADDR MPC5XXX_SRAM -#define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_SIZE - -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE -#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) -#define CONFIG_SYS_RAMBOOT 1 -#endif - -#define CONFIG_SYS_MONITOR_LEN (384 << 10) /* 384 kB for Monitor */ -#define CONFIG_SYS_MALLOC_LEN (1024 << 10) /* 1 MiB for malloc() */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* initial mem map for Linux */ - -/* - * Chip selects configuration - */ -/* Boot Chipselect */ -#define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE -#define CONFIG_SYS_BOOTCS_CFG 0x00045D00 - -/* Flash memory addressing */ -#define CONFIG_SYS_CS0_START CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_CS0_SIZE CONFIG_SYS_FLASH_SIZE -#define CONFIG_SYS_CS0_CFG CONFIG_SYS_BOOTCS_CFG - -/* Dual Port SRAM -- Kollmorgen Drive memory addressing */ -#define CONFIG_SYS_CS1_START 0x50000000 -#define CONFIG_SYS_CS1_SIZE 0x10000 -#define CONFIG_SYS_CS1_CFG 0x05055800 - -/* Local register access */ -#define CONFIG_SYS_CS2_START 0x50010000 -#define CONFIG_SYS_CS2_SIZE 0x10000 -#define CONFIG_SYS_CS2_CFG 0x05055800 - -/* Anybus CompactCom Module memory addressing */ -#define CONFIG_SYS_CS3_START 0x50020000 -#define CONFIG_SYS_CS3_SIZE 0x10000 -#define CONFIG_SYS_CS3_CFG 0x05055800 - -/* No burst and dead cycle = 2 for all CSs */ -#define CONFIG_SYS_CS_BURST 0x00000000 -#define CONFIG_SYS_CS_DEADCYCLE 0x22222222 - -/* - * SDRAM configuration - */ -/* 2 x MT48LC16M16A2BG-75 IT:D, CASL 3, 32 bit data bus */ -#define SDRAM_CONFIG1 0x62322900 -#define SDRAM_CONFIG2 0x88c70000 -#define SDRAM_CONTROL 0x504f0000 -#define SDRAM_MODE 0x00cd0000 - -/* - * Flash configuration - */ -#define CONFIG_SYS_FLASH_CFI 1 /* Flash is CFI conformant */ -#define CONFIG_FLASH_CFI_DRIVER 1 -#define CONFIG_SYS_FLASH_BASE 0xff000000 -#define CONFIG_SYS_FLASH_SIZE 0x01000000 -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of memory banks */ -#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE } -#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max num of sects on one chip */ -#define CONFIG_FLASH_16BIT /* Flash is 16-bit */ - -/* - * MTD configuration - */ -#define CONFIG_CMD_MTDPARTS -#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ -#define CONFIG_FLASH_CFI_MTD -#define MTDIDS_DEFAULT "nor0=motionpro-0" -#define MTDPARTS_DEFAULT "mtdparts=motionpro-0:" \ - "13m(fs),2m(kernel),384k(uboot)," \ - "128k(env),128k(redund_env)," \ - "128k(dtb),-(user_data)" - -/* - * IDE/ATA configuration - */ -#define CONFIG_SYS_ATA_BASE_ADDR MPC5XXX_ATA -#define CONFIG_SYS_IDE_MAXBUS 1 -#define CONFIG_SYS_IDE_MAXDEVICE 1 -#define CONFIG_IDE_PREINIT - -#define CONFIG_SYS_ATA_DATA_OFFSET 0x0060 -#define CONFIG_SYS_ATA_REG_OFFSET CONFIG_SYS_ATA_DATA_OFFSET -#define CONFIG_SYS_ATA_STRIDE 4 - -/* - * RTC configuration - */ -#define CONFIG_RTC_DS1337 1 -#define CONFIG_SYS_I2C_RTC_ADDR 0x68 - -/* - * Status LED configuration - */ - -#define ENABLE_GPIO_OUT 0x00000024 -#define LED_ON 0x00000010 - -/* - * Environment settings - */ -#define CONFIG_ENV_IS_IN_FLASH 1 -/* This has to be a multiple of the Flash sector size */ -#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) -#define CONFIG_ENV_SIZE 0x1000 -#define CONFIG_ENV_SECT_SIZE 0x20000 - -/* Configuration of redundant environment */ -#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) - -/* - * Pin multiplexing configuration - */ - -/* PSC1: UART1 - * PSC2: GPIO (default) - * PSC3: GPIO (default) - * USB: 2xUART4/5 - * Ethernet: Ethernet 100Mbit with MD - * Timer: CAN2/GPIO - * PSC6/IRDA: GPIO (default) - */ -#define CONFIG_SYS_GPS_PORT_CONFIG 0x1105a004 - -/* - * Motion-PRO's CPLD revision control register - */ -#define CPLD_REV_REGISTER (CONFIG_SYS_CS2_START + 0x06) - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x03e00000 /* 1 ... 62 MiB in DRAM */ -#define CONFIG_SYS_ALT_MEMTEST - -#define CONFIG_SYS_LOAD_ADDR 0x200000 /* default kernel load addr */ - -/* - * Various low-level settings - */ -#define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI -#define CONFIG_SYS_HID0_FINAL HID0_ICE - -#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ - -/* Not needed for MPC 5xxx U-Boot, but used by tools/updater */ -#define CONFIG_SYS_RESET_ADDRESS 0xfff00100 - -#define OF_CPU "PowerPC,5200@0" -#define OF_SOC "soc5200@f0000000" -#define OF_TBCLK (bd->bi_busfreq / 4) -#define OF_STDOUT_PATH "/soc5200@f0000000/serial@2000" - -#endif /* __CONFIG_H */ diff --git a/include/configs/mpc5121-common.h b/include/configs/mpc5121-common.h deleted file mode 100644 index d252297e89..0000000000 --- a/include/configs/mpc5121-common.h +++ /dev/null @@ -1,32 +0,0 @@ -/* - * (C) Copyright 2010 DENX Software Engineering - * Anatolij Gustschin <agust@denx.de> - * - * Common configuration options for MPC5121 based boards - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __MPC5121_COMMON_H -#define __MPC5121_COMMON_H - -/* Use SRAM for initial stack */ -#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_SRAM_BASE /* Init RAM base */ -#define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_SRAM_SIZE /* Size of area */ - -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_GBL_DATA_OFFSET - 0x4) - -#define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest region */ -#define CONFIG_SYS_MEMTEST_END 0x00400000 - -/* - * Serial console - */ -#define CONFIG_SYS_BAUDRATE_TABLE \ - {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} - -#define CONFIG_CMDLINE_EDITING 1 /* command line history */ - -#endif /* __MPC5121_COMMON_H */ diff --git a/include/configs/mpc5121ads.h b/include/configs/mpc5121ads.h deleted file mode 100644 index a6aaf0e4ba..0000000000 --- a/include/configs/mpc5121ads.h +++ /dev/null @@ -1,578 +0,0 @@ -/* - * (C) Copyright 2007-2009 DENX Software Engineering - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * MPC5121ADS board configuration file - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#define CONFIG_MPC5121ADS 1 - -/* - * Memory map for the MPC5121ADS board: - * - * 0x0000_0000 - 0x0FFF_FFFF DDR RAM (256 MB) - * 0x3000_0000 - 0x3001_FFFF SRAM (128 KB) - * 0x8000_0000 - 0x803F_FFFF IMMR (4 MB) - * 0x8200_0000 - 0x8200_001F CPLD (32 B) - * 0x8400_0000 - 0x82FF_FFFF PCI I/O space (16 MB) - * 0xA000_0000 - 0xAFFF_FFFF PCI memory space (256 MB) - * 0xB000_0000 - 0xBFFF_FFFF PCI memory mapped I/O space (256 MB) - * 0xFC00_0000 - 0xFFFF_FFFF NOR Boot FLASH (64 MB) - */ - -/* - * High Level Configuration Options - */ -#define CONFIG_E300 1 /* E300 Family */ - -#define CONFIG_SYS_TEXT_BASE 0xFFF00000 - -/* video */ -#ifdef CONFIG_FSL_DIU_FB -#define CONFIG_SYS_DIU_ADDR (CONFIG_SYS_IMMR + 0x2100) -#define CONFIG_VIDEO_LOGO -#define CONFIG_VIDEO_BMP_LOGO -#endif - -/* CONFIG_PCI is defined at config time */ - -#ifdef CONFIG_MPC5121ADS_REV2 -#define CONFIG_SYS_MPC512X_CLKIN 66000000 /* in Hz */ -#else -#define CONFIG_SYS_MPC512X_CLKIN 33333333 /* in Hz */ -#endif - -#define CONFIG_MISC_INIT_R - -#define CONFIG_SYS_IMMR 0x80000000 - -#define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest region */ -#define CONFIG_SYS_MEMTEST_END 0x00400000 - -/* - * DDR Setup - manually set all parameters as there's no SPD etc. - */ -#ifdef CONFIG_MPC5121ADS_REV2 -#define CONFIG_SYS_DDR_SIZE 256 /* MB */ -#else -#define CONFIG_SYS_DDR_SIZE 512 /* MB */ -#endif -#define CONFIG_SYS_DDR_BASE 0x00000000 /* DDR is system memory*/ -#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_BASE -#define CONFIG_SYS_MAX_RAM_SIZE 0x20000000 - -#define CONFIG_SYS_IOCTRL_MUX_DDR 0x00000036 - -/* DDR Controller Configuration - * - * SYS_CFG: - * [31:31] MDDRC Soft Reset: Diabled - * [30:30] DRAM CKE pin: Enabled - * [29:29] DRAM CLK: Enabled - * [28:28] Command Mode: Enabled (For initialization only) - * [27:25] DRAM Row Select: dram_row[15:0] = magenta_address[25:10] - * [24:21] DRAM Bank Select: dram_bank[1:0] = magenta_address[11:10] - * [20:19] Read Test: DON'T USE - * [18:18] Self Refresh: Enabled - * [17:17] 16bit Mode: Disabled - * [16:13] Ready Delay: 2 - * [12:12] Half DQS Delay: Disabled - * [11:11] Quarter DQS Delay: Disabled - * [10:08] Write Delay: 2 - * [07:07] Early ODT: Disabled - * [06:06] On DIE Termination: Disabled - * [05:05] FIFO Overflow Clear: DON'T USE here - * [04:04] FIFO Underflow Clear: DON'T USE here - * [03:03] FIFO Overflow Pending: DON'T USE here - * [02:02] FIFO Underlfow Pending: DON'T USE here - * [01:01] FIFO Overlfow Enabled: Enabled - * [00:00] FIFO Underflow Enabled: Enabled - * TIME_CFG0 - * [31:16] DRAM Refresh Time: 0 CSB clocks - * [15:8] DRAM Command Time: 0 CSB clocks - * [07:00] DRAM Precharge Time: 0 CSB clocks - * TIME_CFG1 - * [31:26] DRAM tRFC: - * [25:21] DRAM tWR1: - * [20:17] DRAM tWRT1: - * [16:11] DRAM tDRR: - * [10:05] DRAM tRC: - * [04:00] DRAM tRAS: - * TIME_CFG2 - * [31:28] DRAM tRCD: - * [27:23] DRAM tFAW: - * [22:19] DRAM tRTW1: - * [18:15] DRAM tCCD: - * [14:10] DRAM tRTP: - * [09:05] DRAM tRP: - * [04:00] DRAM tRPA - */ -#ifdef CONFIG_MPC5121ADS_REV2 -#define CONFIG_SYS_MDDRC_SYS_CFG 0xE8604A00 -#define CONFIG_SYS_MDDRC_TIME_CFG1 0x54EC1168 -#define CONFIG_SYS_MDDRC_TIME_CFG2 0x35210864 -#else -#define CONFIG_SYS_MDDRC_SYS_CFG 0xEA804A00 -#define CONFIG_SYS_MDDRC_TIME_CFG1 0x68EC1168 -#define CONFIG_SYS_MDDRC_TIME_CFG2 0x34310864 -#endif -#define CONFIG_SYS_MDDRC_TIME_CFG0 0x06183D2E - -#define CONFIG_SYS_MDDRC_SYS_CFG_ELPIDA 0xEA802B00 -#define CONFIG_SYS_MDDRC_TIME_CFG1_ELPIDA 0x690e1189 -#define CONFIG_SYS_MDDRC_TIME_CFG2_ELPIDA 0x35310864 - -#define CONFIG_SYS_DDRCMD_NOP 0x01380000 -#define CONFIG_SYS_DDRCMD_PCHG_ALL 0x01100400 -#define CONFIG_SYS_DDRCMD_EM2 0x01020000 -#define CONFIG_SYS_DDRCMD_EM3 0x01030000 -#define CONFIG_SYS_DDRCMD_EN_DLL 0x01010000 -#define CONFIG_SYS_DDRCMD_RFSH 0x01080000 - -#define DDRCMD_EMR_OCD(pr, ohm) ( \ - (1 << 24) | /* MDDRC Command Request */ \ - (1 << 16) | /* MODE Reg BA[2:0] */ \ - (0 << 12) | /* Outputs 0=Enabled */ \ - (0 << 11) | /* RDQS */ \ - (1 << 10) | /* DQS# */ \ - (pr << 7) | /* OCD prog 7=deflt,0=exit */ \ - /* ODT Rtt[1:0] 0=0,1=75,2=150,3=50 */ \ - ((ohm & 0x2) << 5)| /* Rtt1 */ \ - (0 << 3) | /* additive posted CAS# */ \ - ((ohm & 0x1) << 2)| /* Rtt0 */ \ - (0 << 0) | /* Output Drive Strength */ \ - (0 << 0)) /* DLL Enable 0=Normal */ - -#define CONFIG_SYS_DDRCMD_OCD_DEFAULT DDRCMD_EMR_OCD(7, 0) -#define CONFIG_SYS_ELPIDA_OCD_EXIT DDRCMD_EMR_OCD(0, 0) - -#define DDRCMD_MODE_REG(cas, wr) ( \ - (1 << 24) | /* MDDRC Command Request */ \ - (0 << 16) | /* MODE Reg BA[2:0] */ \ - ((wr-1) << 9)| /* Write Recovery */ \ - (cas << 4) | /* CAS */ \ - (0 << 3) | /* Burst Type:0=Sequential,1=Interleaved */ \ - (2 << 0)) /* 4 or 8 Burst Length:0x2=4 0x3=8 */ - -#define CONFIG_SYS_MICRON_INIT_DEV_OP DDRCMD_MODE_REG(3, 3) -#define CONFIG_SYS_ELPIDA_INIT_DEV_OP DDRCMD_MODE_REG(4, 4) -#define CONFIG_SYS_ELPIDA_RES_DLL (DDRCMD_MODE_REG(4, 4) | (1 << 8)) - -/* DDR Priority Manager Configuration */ -#define CONFIG_SYS_MDDRCGRP_PM_CFG1 0x00077777 -#define CONFIG_SYS_MDDRCGRP_PM_CFG2 0x00000000 -#define CONFIG_SYS_MDDRCGRP_HIPRIO_CFG 0x00000001 -#define CONFIG_SYS_MDDRCGRP_LUT0_MU 0xFFEEDDCC -#define CONFIG_SYS_MDDRCGRP_LUT0_ML 0xBBAAAAAA -#define CONFIG_SYS_MDDRCGRP_LUT1_MU 0x66666666 -#define CONFIG_SYS_MDDRCGRP_LUT1_ML 0x55555555 -#define CONFIG_SYS_MDDRCGRP_LUT2_MU 0x44444444 -#define CONFIG_SYS_MDDRCGRP_LUT2_ML 0x44444444 -#define CONFIG_SYS_MDDRCGRP_LUT3_MU 0x55555555 -#define CONFIG_SYS_MDDRCGRP_LUT3_ML 0x55555558 -#define CONFIG_SYS_MDDRCGRP_LUT4_MU 0x11111111 -#define CONFIG_SYS_MDDRCGRP_LUT4_ML 0x11111122 -#define CONFIG_SYS_MDDRCGRP_LUT0_AU 0xaaaaaaaa -#define CONFIG_SYS_MDDRCGRP_LUT0_AL 0xaaaaaaaa -#define CONFIG_SYS_MDDRCGRP_LUT1_AU 0x66666666 -#define CONFIG_SYS_MDDRCGRP_LUT1_AL 0x66666666 -#define CONFIG_SYS_MDDRCGRP_LUT2_AU 0x11111111 -#define CONFIG_SYS_MDDRCGRP_LUT2_AL 0x11111111 -#define CONFIG_SYS_MDDRCGRP_LUT3_AU 0x11111111 -#define CONFIG_SYS_MDDRCGRP_LUT3_AL 0x11111111 -#define CONFIG_SYS_MDDRCGRP_LUT4_AU 0x11111111 -#define CONFIG_SYS_MDDRCGRP_LUT4_AL 0x11111111 - -/* - * NOR FLASH on the Local Bus - */ -#undef CONFIG_BKUP_FLASH -#define CONFIG_SYS_FLASH_CFI /* use the Common Flash Interface */ -#define CONFIG_FLASH_CFI_DRIVER /* use the CFI driver */ -#ifdef CONFIG_BKUP_FLASH -#define CONFIG_SYS_FLASH_BASE 0xFF800000 /* start of FLASH */ -#define CONFIG_SYS_FLASH_SIZE 0x00800000 /* max flash size in bytes */ -#else -#define CONFIG_SYS_FLASH_BASE 0xFC000000 /* start of FLASH */ -#define CONFIG_SYS_FLASH_SIZE 0x04000000 /* max flash size in bytes */ -#endif -#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ -#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE} -#define CONFIG_SYS_MAX_FLASH_SECT 256 /* max sectors per device */ - -#undef CONFIG_SYS_FLASH_CHECKSUM - -/* - * NAND FLASH - * drivers/mtd/nand/mpc5121_nfc.c (rev 2 silicon only) - */ -#define CONFIG_CMD_NAND /* enable NAND support */ -#define CONFIG_JFFS2_NAND /* with JFFS2 on it */ -#define CONFIG_NAND_MPC5121_NFC -#define CONFIG_SYS_NAND_BASE 0x40000000 - -#define CONFIG_SYS_MAX_NAND_DEVICE 2 -#define CONFIG_SYS_NAND_SELECT_DEVICE /* driver supports mutipl. chips */ - -/* - * Configuration parameters for MPC5121 NAND driver - */ -#define CONFIG_FSL_NFC_WIDTH 1 -#define CONFIG_FSL_NFC_WRITE_SIZE 2048 -#define CONFIG_FSL_NFC_SPARE_SIZE 64 -#define CONFIG_FSL_NFC_CHIPS CONFIG_SYS_MAX_NAND_DEVICE - -/* - * CPLD registers area is really only 32 bytes in size, but the smallest possible LP - * window is 64KB - */ -#define CONFIG_SYS_CPLD_BASE 0x82000000 -#define CONFIG_SYS_CPLD_SIZE 0x00010000 /* 64 KB */ -#define CONFIG_SYS_CS2_START CONFIG_SYS_CPLD_BASE -#define CONFIG_SYS_CS2_SIZE CONFIG_SYS_CPLD_SIZE - -#define CONFIG_SYS_SRAM_BASE 0x30000000 -#define CONFIG_SYS_SRAM_SIZE 0x00020000 /* 128 KB */ - -#define CONFIG_SYS_CS0_CFG 0x05059310 /* ALE active low, data size 4bytes */ -#define CONFIG_SYS_CS2_CFG 0x05059010 /* ALE active low, data size 1byte */ -#define CONFIG_SYS_CS_ALETIMING 0x00000005 /* Use alternative CS timing for CS0 and CS2 */ - -/* Use SRAM for initial stack */ -#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_SRAM_BASE /* Initial RAM address */ -#define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_SRAM_SIZE /* Size of used area in RAM */ - -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* Start of monitor */ -#define CONFIG_SYS_MONITOR_LEN (512 * 1024) /* Reserve 512 kB for Mon */ -#ifdef CONFIG_FSL_DIU_FB -#define CONFIG_SYS_MALLOC_LEN (6 * 1024 * 1024) /* Reserved for malloc */ -#else -#define CONFIG_SYS_MALLOC_LEN (512 * 1024) -#endif - -/* - * Serial Port - */ -#define CONFIG_CONS_INDEX 1 - -/* - * Serial console configuration - */ -#define CONFIG_PSC_CONSOLE 3 /* console is on PSC3 */ -#define CONFIG_SYS_PSC3 -#if CONFIG_PSC_CONSOLE != 3 -#error CONFIG_PSC_CONSOLE must be 3 -#endif -#define CONFIG_SYS_BAUDRATE_TABLE \ - {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200} - -#define CONSOLE_FIFO_TX_SIZE FIFOC_PSC3_TX_SIZE -#define CONSOLE_FIFO_TX_ADDR FIFOC_PSC3_TX_ADDR -#define CONSOLE_FIFO_RX_SIZE FIFOC_PSC3_RX_SIZE -#define CONSOLE_FIFO_RX_ADDR FIFOC_PSC3_RX_ADDR - -#define CONFIG_CMDLINE_EDITING 1 /* add command line history */ - -/* - * Clocks in use - */ -#define SCCR1_CLOCKS_EN (CLOCK_SCCR1_CFG_EN | \ - CLOCK_SCCR1_DDR_EN | \ - CLOCK_SCCR1_FEC_EN | \ - CLOCK_SCCR1_LPC_EN | \ - CLOCK_SCCR1_NFC_EN | \ - CLOCK_SCCR1_PATA_EN | \ - CLOCK_SCCR1_PCI_EN | \ - CLOCK_SCCR1_PSC_EN(CONFIG_PSC_CONSOLE) | \ - CLOCK_SCCR1_PSCFIFO_EN | \ - CLOCK_SCCR1_TPR_EN) - -#define SCCR2_CLOCKS_EN (CLOCK_SCCR2_DIU_EN | \ - CLOCK_SCCR2_I2C_EN | \ - CLOCK_SCCR2_MEM_EN | \ - CLOCK_SCCR2_SPDIF_EN | \ - CLOCK_SCCR2_USB1_EN | \ - CLOCK_SCCR2_USB2_EN) - -/* - * PCI - */ -#ifdef CONFIG_PCI -#define CONFIG_PCI_INDIRECT_BRIDGE - -/* - * General PCI - */ -#define CONFIG_SYS_PCI_MEM_BASE 0xA0000000 -#define CONFIG_SYS_PCI_MEM_PHYS CONFIG_SYS_PCI_MEM_BASE -#define CONFIG_SYS_PCI_MEM_SIZE 0x10000000 /* 256M */ -#define CONFIG_SYS_PCI_MMIO_BASE (CONFIG_SYS_PCI_MEM_BASE + CONFIG_SYS_PCI_MEM_SIZE) -#define CONFIG_SYS_PCI_MMIO_PHYS CONFIG_SYS_PCI_MMIO_BASE -#define CONFIG_SYS_PCI_MMIO_SIZE 0x10000000 /* 256M */ -#define CONFIG_SYS_PCI_IO_BASE 0x00000000 -#define CONFIG_SYS_PCI_IO_PHYS 0x84000000 -#define CONFIG_SYS_PCI_IO_SIZE 0x01000000 /* 16M */ - -#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ - -#endif - -/* - * IIM - IC Identification Module - */ -#undef CONFIG_FSL_IIM - -/* - * Ethernet configuration - */ -#define CONFIG_MPC512x_FEC 1 -#define CONFIG_PHY_ADDR 0x1 -#define CONFIG_MII 1 /* MII PHY management */ -#define CONFIG_FEC_AN_TIMEOUT 1 -#define CONFIG_HAS_ETH0 - -/* - * Configure on-board RTC - */ -#define CONFIG_RTC_M41T62 /* use M41T62 rtc via i2 */ -#define CONFIG_SYS_I2C_RTC_ADDR 0x68 /* at address 0x68 */ - -/* - * USB Support - */ - -#if defined(CONFIG_CMD_USB) -#define CONFIG_USB_EHCI_FSL /* On a FSL platform */ -#define CONFIG_EHCI_MMIO_BIG_ENDIAN /* With big-endian regs */ -#define CONFIG_EHCI_DESC_BIG_ENDIAN -#define CONFIG_EHCI_IS_TDI -#endif - -/* - * Environment - */ -#define CONFIG_ENV_IS_IN_FLASH 1 -/* This has to be a multiple of the Flash sector size */ -#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) -#define CONFIG_ENV_SIZE 0x2000 -#ifdef CONFIG_BKUP_FLASH -#define CONFIG_ENV_SECT_SIZE 0x20000 /* one sector (256K) for env */ -#else -#define CONFIG_ENV_SECT_SIZE 0x40000 /* one sector (256K) for env */ -#endif - -/* Address and size of Redundant Environment Sector */ -#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) - -#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ -#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ - -#define CONFIG_CMD_REGINFO - -#if defined(CONFIG_PCI) -#define CONFIG_CMD_PCI -#endif - -/* - * Dynamic MTD partition support - */ -#define CONFIG_CMD_MTDPARTS -#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ -#define CONFIG_FLASH_CFI_MTD -#define MTDIDS_DEFAULT "nor0=fc000000.flash,nand0=mpc5121.nand" - -/* - * NOR flash layout: - * - * FC000000 - FEABFFFF 42.75 MiB User Data - * FEAC0000 - FFABFFFF 16 MiB Root File System - * FFAC0000 - FFEBFFFF 4 MiB Linux Kernel - * FFEC0000 - FFEFFFFF 256 KiB Device Tree - * FFF00000 - FFFFFFFF 1 MiB U-Boot (up to 512 KiB) and 2 x * env - * - * NAND flash layout: one big partition - */ -#define MTDPARTS_DEFAULT "mtdparts=fc000000.flash:43776k(user)," \ - "16m(rootfs)," \ - "4m(kernel)," \ - "256k(dtb)," \ - "1m(u-boot);" \ - "mpc5121.nand:-(data)" - -#if defined(CONFIG_IDE) || defined(CONFIG_CMD_EXT2) || defined(CONFIG_CMD_USB) -#define CONFIG_SUPPORT_VFAT - -#endif /* defined(CONFIG_IDE) */ - -/* - * Watchdog timeout = CONFIG_SYS_WATCHDOG_VALUE * 65536 / IPS clock. - * For example, when IPS is set to 66MHz and CONFIG_SYS_WATCHDOG_VALUE is set - * to 0xFFFF, watchdog timeouts after about 64s. For details refer - * to chapter 36 of the MPC5121e Reference Manual. - */ -/* #define CONFIG_WATCHDOG */ /* enable watchdog */ -#define CONFIG_SYS_WATCHDOG_VALUE 0xFFFF - - /* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ - -#ifdef CONFIG_CMD_KGDB - #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else - #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif - -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -/* - * For booting Linux, the board info and command line data - * have to be in the first 256 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (256 << 20) /* Initial Memory map for Linux*/ - -/* Cache Configuration */ -#define CONFIG_SYS_DCACHE_SIZE 32768 -#define CONFIG_SYS_CACHELINE_SIZE 32 -#ifdef CONFIG_CMD_KGDB -#define CONFIG_SYS_CACHELINE_SHIFT 5 /*log base 2 of the above value*/ -#endif - -#define CONFIG_SYS_HID0_INIT 0x000000000 -#define CONFIG_SYS_HID0_FINAL (HID0_ENABLE_MACHINE_CHECK | HID0_ICE) -#define CONFIG_SYS_HID2 HID2_HBE - -#define CONFIG_HIGH_BATS 1 /* High BATs supported */ - -#ifdef CONFIG_CMD_KGDB -#define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */ -#endif - -/* - * Environment Configuration - */ -#define CONFIG_TIMESTAMP - -#define CONFIG_HOSTNAME mpc5121ads -#define CONFIG_BOOTFILE "mpc5121ads/uImage" -#define CONFIG_ROOTPATH "/opt/eldk/ppc_6xx" - -#define CONFIG_LOADADDR 400000 /* default location for tftp and bootm */ - -#undef CONFIG_BOOTARGS /* the boot command will set bootargs */ - -#define CONFIG_PREBOOT "echo;" \ - "echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \ - "echo" - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "u-boot_addr_r=200000\0" \ - "kernel_addr_r=600000\0" \ - "fdt_addr_r=880000\0" \ - "ramdisk_addr_r=900000\0" \ - "u-boot_addr=FFF00000\0" \ - "kernel_addr=FFAC0000\0" \ - "fdt_addr=FFEC0000\0" \ - "ramdisk_addr=FEAC0000\0" \ - "ramdiskfile=mpc5121ads/uRamdisk\0" \ - "u-boot=mpc5121ads/u-boot.bin\0" \ - "bootfile=mpc5121ads/uImage\0" \ - "fdtfile=mpc5121ads/mpc5121ads.dtb\0" \ - "rootpath=/opt/eldk/ppc_6xx\n" \ - "netdev=eth0\0" \ - "consdev=ttyPSC0\0" \ - "nfsargs=setenv bootargs root=/dev/nfs rw " \ - "nfsroot=${serverip}:${rootpath}\0" \ - "ramargs=setenv bootargs root=/dev/ram rw\0" \ - "addip=setenv bootargs ${bootargs} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ - ":${hostname}:${netdev}:off panic=1\0" \ - "addtty=setenv bootargs ${bootargs} " \ - "console=${consdev},${baudrate}\0" \ - "flash_nfs=run nfsargs addip addtty;" \ - "bootm ${kernel_addr} - ${fdt_addr}\0" \ - "flash_self=run ramargs addip addtty;" \ - "bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \ - "net_nfs=tftp ${kernel_addr_r} ${bootfile};" \ - "tftp ${fdt_addr_r} ${fdtfile};" \ - "run nfsargs addip addtty;" \ - "bootm ${kernel_addr_r} - ${fdt_addr_r}\0" \ - "net_self=tftp ${kernel_addr_r} ${bootfile};" \ - "tftp ${ramdisk_addr_r} ${ramdiskfile};" \ - "tftp ${fdt_addr_r} ${fdtfile};" \ - "run ramargs addip addtty;" \ - "bootm ${kernel_addr_r} ${ramdisk_addr_r} ${fdt_addr_r}\0"\ - "load=tftp ${u-boot_addr_r} ${u-boot}\0" \ - "update=protect off ${u-boot_addr} +${filesize};" \ - "era ${u-boot_addr} +${filesize};" \ - "cp.b ${u-boot_addr_r} ${u-boot_addr} ${filesize}\0" \ - "upd=run load update\0" \ - "" - -#define CONFIG_BOOTCOMMAND "run flash_self" - -#define CONFIG_OF_SUPPORT_OLD_DEVICE_TREES 1 - -#define OF_CPU "PowerPC,5121@0" -#define OF_SOC_COMPAT "fsl,mpc5121-immr" -#define OF_TBCLK (bd->bi_busfreq / 4) -#define OF_STDOUT_PATH "/soc@80000000/serial@11300" - -/*----------------------------------------------------------------------- - * IDE/ATA stuff - *----------------------------------------------------------------------- - */ -#undef CONFIG_IDE_LED /* LED for IDE not supported */ - -#define CONFIG_IDE_RESET /* reset for IDE supported */ -#define CONFIG_IDE_PREINIT - -#define CONFIG_SYS_IDE_MAXBUS 1 /* max. 1 IDE bus */ -#define CONFIG_SYS_IDE_MAXDEVICE 2 /* max. 1 drive per IDE bus */ - -#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000 -#define CONFIG_SYS_ATA_BASE_ADDR get_pata_base() - -/* Offset for data I/O RefMan MPC5121EE Table 28-10 */ -#define CONFIG_SYS_ATA_DATA_OFFSET (0x00A0) - -/* Offset for normal register accesses */ -#define CONFIG_SYS_ATA_REG_OFFSET (CONFIG_SYS_ATA_DATA_OFFSET) - -/* Offset for alternate registers RefMan MPC5121EE Table 28-23 */ -#define CONFIG_SYS_ATA_ALT_OFFSET (0x00D8) - -/* Interval between registers */ -#define CONFIG_SYS_ATA_STRIDE 4 - -#define ATA_BASE_ADDR get_pata_base() - -/* - * Control register bit definitions - */ -#define FSL_ATA_CTRL_FIFO_RST_B 0x80000000 -#define FSL_ATA_CTRL_ATA_RST_B 0x40000000 -#define FSL_ATA_CTRL_FIFO_TX_EN 0x20000000 -#define FSL_ATA_CTRL_FIFO_RCV_EN 0x10000000 -#define FSL_ATA_CTRL_DMA_PENDING 0x08000000 -#define FSL_ATA_CTRL_DMA_ULTRA 0x04000000 -#define FSL_ATA_CTRL_DMA_WRITE 0x02000000 -#define FSL_ATA_CTRL_IORDY_EN 0x01000000 - -#endif /* __CONFIG_H */ diff --git a/include/configs/munices.h b/include/configs/munices.h deleted file mode 100644 index ad2d69e6a5..0000000000 --- a/include/configs/munices.h +++ /dev/null @@ -1,186 +0,0 @@ -/* - * (C) Copyright 2007 - * Heiko Schocher, DENX Software Engineering, hs@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H -/* - * High Level Configuration Options - * (easy to change) - */ -#define CONFIG_MPC5200 1 /* This is an MPC5200 CPU */ -#define CONFIG_MPC5200_DDR 1 /* (with DDR-SDRAM) */ -#define CONFIG_MUNICES 1 /* ... on MUNICes board */ - -#ifndef CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_TEXT_BASE 0xFFF00000 -#endif - -#define CONFIG_SYS_MPC5XXX_CLKIN 33333333 /* ... running at 33.333333MHz */ -#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ -#define CONFIG_HIGH_BATS 1 /* High BATs supported */ - -/* - * Command line configuration. - */ -#define CONFIG_CMD_REGINFO - -#if defined(CONFIG_CMD_KGDB) -# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - -/* - * Serial console configuration - */ -#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } - -#define CONFIG_TIMESTAMP 1 /* Print image info with timestamp */ -#undef CONFIG_BOOTARGS - -#define CONFIG_PREBOOT "echo;" \ - "echo Type \"run net_nfs\" to load Kernel over TFTP and to mount root filesystem over NFS;" \ - "echo" - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "netdev=eth0\0" \ - "nfsargs=setenv bootargs root=/dev/nfs rw " \ - "nfsroot=$(serverip):$(rootpath)\0" \ - "ramargs=setenv bootargs root=/dev/ram rw\0" \ - "addip=setenv bootargs $(bootargs) " \ - "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)" \ - ":$(hostname):$(netdev):off panic=5\0" \ - "flash_nfs=run nfsargs addip;" \ - "bootm $(kernel_addr)\0" \ - "flash_self=run ramargs addip;" \ - "bootm $(kernel_addr) $(ramdisk_addr)\0" \ - "net_nfs=tftp 200000 $(bootfile);run nfsargs addip;bootm\0" \ - "rootpath=/opt/eldk/ppc_6xx\0" \ - "bootfile=/tftpboot/munices/u-boot.bin\0" \ - "update=tftpboot 200000 ${bootfile};protect off fff00000 fff3ffff;" \ - "erase fff00000 fff3ffff; cp.b 200000 FFF00000 ${filesize}\0" \ - "" -#define CONFIG_BOOTCOMMAND "run net_nfs" - -/* - * IPB Bus clocking configuration. - */ -#define CONFIG_SYS_IPBSPEED_133 /* define for 133MHz speed */ -#if defined(CONFIG_SYS_IPBSPEED_133) -/* - * PCI Bus clocking configuration - * - * Actually a PCI Clock of 66 MHz is only set (in cpu_init.c) if - * CONFIG_SYS_IPBSPEED_133 is defined. This is because a PCI Clock of 66 MHz yet hasn't - * been tested with a IPB Bus Clock of 66 MHz. - */ -#define CONFIG_SYS_PCISPEED_66 /* define for 66MHz speed */ -#else -#undef CONFIG_SYS_PCISPEED_66 /* for 33MHz speed */ -#endif - -/* - * Memory map - */ -#define CONFIG_SYS_MBAR 0xF0000000 /* MBAR hast to be switched by other bootloader or debugger config */ - -#define CONFIG_SYS_DEFAULT_MBAR 0x80000000 -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -/* Use SRAM until RAM will be available */ -#define CONFIG_SYS_INIT_RAM_ADDR MPC5XXX_SRAM -#define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_SIZE /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE -#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) -# define CONFIG_SYS_RAMBOOT 1 -#endif - -#define CONFIG_SYS_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */ -#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ - -/* - * Flash configuration - */ -#define CONFIG_SYS_FLASH_BASE 0xFF000000 -#define CONFIG_SYS_FLASH_CFI 1 /* Flash is CFI conformant */ -#define CONFIG_FLASH_CFI_DRIVER 1 /* Use the common driver */ -#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE } -#define CONFIG_SYS_FLASH_EMPTY_INFO -#define CONFIG_SYS_FLASH_SIZE 0x01000000 /* 16 MByte */ -#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max num of sects on one chip */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of flash banks (= chip selects) */ -#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE /* not supported yet for AMD */ - -/* - * Chip selects configuration - */ -/* Boot Chipselect */ -#define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE -#define CONFIG_SYS_BOOTCS_CFG 0x00047800 - -/* - * Environment settings - */ -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_OFFSET 0x40000 -#define CONFIG_ENV_ADDR (CONFIG_SYS_TEXT_BASE + CONFIG_ENV_OFFSET) -#define CONFIG_ENV_SECT_SIZE 0x20000 -#define CONFIG_ENV_SIZE 0x4000 -#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_ADDR_REDUND (CONFIG_SYS_TEXT_BASE + CONFIG_ENV_OFFSET_REDUND) -#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) -#define CONFIG_ENV_OVERWRITE 1 - -/* - * Ethernet configuration - */ -#define CONFIG_MPC5xxx_FEC 1 -#define CONFIG_MPC5xxx_FEC_MII100 -#define CONFIG_PHY_ADDR 0x01 -#define CONFIG_MII 1 - -/* - * GPIO configuration - */ -#define CONFIG_SYS_GPS_PORT_CONFIG 0x00058044 /* PSC1=UART, PSC2=UART ; Ether=100MBit with MD - no PCI */ - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0x200000 /* default load address */ - -#define CONFIG_CMDLINE_EDITING 1 - -/* - * Various low-level settings - */ -#define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI -#define CONFIG_SYS_HID0_FINAL HID0_ICE - -#define CONFIG_SYS_CS_BURST 0x00000000 -#define CONFIG_SYS_CS_DEADCYCLE 0x33333333 -#define CONFIG_SYS_RESET_ADDRESS 0xff000000 - -#define OF_CPU "PowerPC,5200@0" -#define OF_TBCLK (bd->bi_busfreq / 4) -#define OF_SOC "soc5200@f0000000" -#define OF_STDOUT_PATH "/soc5200@f0000000/serial@2000" - -#endif /* __CONFIG_H */ diff --git a/include/configs/o2d.h b/include/configs/o2d.h deleted file mode 100644 index 4b36af699a..0000000000 --- a/include/configs/o2d.h +++ /dev/null @@ -1,74 +0,0 @@ -/* - * (C) Copyright 2012 - * DENX Software Engineering, Anatolij Gustschin <agust@denx.de> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * Valid values for CONFIG_SYS_TEXT_BASE are: - * 0xFC000000 boot low boot high (standard configuration) - * 0x00100000 boot from RAM (for testing only) - */ -#ifndef CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_TEXT_BASE 0xfc000000 /* Standard: boot low */ -#endif - -/* Board specific flash config */ -#define CONFIG_SYS_FLASH_BASE 0xfc000000 -#define CONFIG_SYS_FLASH_SIZE 0x04000000 /* maximum 64MB */ -/* max number of sectors on one chip */ -#define CONFIG_SYS_MAX_FLASH_SECT 512 - -/* - * Include common defines for all ifm boards - */ -#include "o2dnt-common.h" - -/* - * GPIO configuration: - * CS1 SDRAM activate + no CAN + no PCI - */ -#define CONFIG_SYS_GPS_PORT_CONFIG 0x8000A004 - -/* Other board specific configs */ -#define CONFIG_SYS_BOOTCS_CFG 0x00057d01 -#define CONFIG_SYS_RESET_ADDRESS 0xfc000000 - -#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x07f00000 /* 1 - 127 MB in DRAM */ - -#define CONFIG_BOARD_NAME "o2d" -#define CONFIG_BOARD_BOOTCMD "run dhcp_boot" -#define CONFIG_BOARD_MEM_LIMIT __stringify(126) -#define BOARD_POST_CRC32_END __stringify(0x01000000) - -#define CONFIG_EXTRA_ENV_SETTINGS \ - CONFIG_IFM_DEFAULT_ENV_SETTINGS \ - CONFIG_IFM_DEFAULT_ENV_OLD \ - CONFIG_IFM_DEFAULT_ENV_NEW \ - "linbot=fc060000\0" \ - "lintop=fc15ffff\0" \ - "rambot=fc160000\0" \ - "ramtop=fc55ffff\0" \ - "jffbot=fc560000\0" \ - "jfftop=fcffffff\0" \ - "ubobot=" __stringify(CONFIG_SYS_FLASH_BASE) "\0" \ - "ubotop=fc03ffff\0" \ - "kernel_addr=0xfc060000\0" \ - "ramdisk_addr=0xfc160000\0" \ - "progCram=tftp ${fileaddr} ${cramfsname};" \ - "erase ${rambot} ${ramtop};" \ - "cp.b ${fileaddr} ${rambot} ${filesize}\0" \ - "flash_for_configs=22396\0" \ - "flash_mtd=run mtd_args addip addmem;" \ - "bootm ${kernel_addr}\0" \ - "mtd_args=setenv bootargs root=/dev/mtdblock3 " \ - "rw rootfstype=cramfs\0" \ - "master=mw f0000b00 0x8005A006;mw f0000b0c ${IOpin};" \ - "mw f0000b04 ${IOpin};mw f0000b10 0x20\0" \ - "dhcp_boot=run dhcpcmd;run flash_mtd\0" \ - "hostname=IFM_SENSOR\0" \ - "netretry=once\0" \ - "autoload=no\0" \ - "sensorType=O2D222AG\0" diff --git a/include/configs/o2d300.h b/include/configs/o2d300.h deleted file mode 100644 index a8222d9f97..0000000000 --- a/include/configs/o2d300.h +++ /dev/null @@ -1,81 +0,0 @@ -/* - * (C) Copyright 2012 - * DENX Software Engineering, Anatolij Gustschin <agust@denx.de> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * Valid values for CONFIG_SYS_TEXT_BASE are: - * 0xFC000000 boot low boot high (standard configuration) - * 0x00100000 boot from RAM (for testing only) - */ -#ifndef CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_TEXT_BASE 0xfc000000 /* Standard: boot low */ -#endif - -/* Board specific flash config */ -#define CONFIG_SYS_FLASH_BASE 0xfc000000 -#define CONFIG_SYS_FLASH_SIZE 0x04000000 /* maximum 64MB */ -/* max number of sectors on one chip */ -#define CONFIG_SYS_MAX_FLASH_SECT 512 - -/* - * Include common defines for all ifm boards - */ -#include "o2dnt-common.h" - -/* - * GPIO configuration: - * CS1 SDRAM activate + no CAN + no PCI - */ -#define CONFIG_SYS_GPS_PORT_CONFIG 0x8000A004 - -/* Other board specific configs */ -#define CONFIG_SYS_BOOTCS_CFG 0x00057d01 -#define CONFIG_SYS_RESET_ADDRESS 0xfc000000 - -#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x07f00000 /* 1 - 127 MB in DRAM */ - -/* Use redundant environment */ -#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) - -#define CONFIG_BOARD_NAME "o2d300" -#define CONFIG_BOARD_BOOTCMD "run dhcp_boot" -#define CONFIG_BOARD_MEM_LIMIT __stringify(126) -#define BOARD_POST_CRC32_END __stringify(0x02000000) - -#define CONFIG_EXTRA_ENV_SETTINGS \ - CONFIG_IFM_DEFAULT_ENV_SETTINGS \ - CONFIG_IFM_DEFAULT_ENV_OLD \ - CONFIG_IFM_DEFAULT_ENV_NEW \ - "autoload=no\0" \ - "dhcp_boot=run dhcpcmd;run flash_mtd\0" \ - "flash_mtd=run mtd_args addip addmem;" \ - "bootm ${kernel_addr}\0" \ - "mtd_args=setenv bootargs root=/dev/mtdblock4 " \ - "rw rootfstype=cramfs\0" \ - "linbot=fc080000\0" \ - "lintop=fc17ffff\0" \ - "rambot=fc180000\0" \ - "ramtop=fc57ffff\0" \ - "jffbot=fc580000\0" \ - "jfftop=fd39ffff\0" \ - "ubobot=" __stringify(CONFIG_SYS_FLASH_BASE) "\0" \ - "ubotop=fc03ffff\0" \ - "halname="CONFIG_BOARD_NAME"/"CONFIG_BOARD_NAME"_halcon\0" \ - "halbot=fd3a0000\0" \ - "haltop=fdf9ffff\0" \ - "progHal=tftp 200000 ${halname};erase ${halbot} ${haltop};" \ - "cp.b ${fileaddr} ${halbot} ${filesize}\0" \ - "kernel_addr=0xfc060000\0" \ - "ramdisk_addr=0xfc160000\0" \ - "master=mw f0000b00 0x8005A006;mw f0000b0c ${IOpin};" \ - "mw f0000b04 ${IOpin};mw f0000b10 0x20\0" \ - "netretry=once\0" \ - "protcmd=protect on ${linbot} ${lintop};" \ - "protect on ${rambot} ${ramtop}\0" \ - "o2derror=def_env\0" \ - "sensorType=O2D300AA\0" diff --git a/include/configs/o2dnt-common.h b/include/configs/o2dnt-common.h deleted file mode 100644 index 1b4200bcbf..0000000000 --- a/include/configs/o2dnt-common.h +++ /dev/null @@ -1,300 +0,0 @@ -/* - * Common configuration options for ifm camera boards - * - * (C) Copyright 2005 - * Sebastien Cazaux, ifm electronic gmbh - * - * (C) Copyright 2012 - * DENX Software Engineering, Anatolij Gustschin <agust@denx.de> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __O2D_CONFIG_H -#define __O2D_CONFIG_H - -/* - * High Level Configuration Options - */ -#define CONFIG_MPC5200 - -#define CONFIG_SYS_MPC5XXX_CLKIN 33000000 /* running at 33.000000MHz */ - -#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ -#if defined(CONFIG_CMD_KGDB) -/* log base 2 of the above value */ -#define CONFIG_SYS_CACHELINE_SHIFT 5 -#endif - -/* -#define CONFIG_POST (CONFIG_SYS_POST_MEMORY | \ - CONFIG_SYS_POST_I2C) -*/ - -#ifdef CONFIG_POST -/* preserve space for the post_word at end of on-chip SRAM */ -#define MPC5XXX_SRAM_POST_SIZE (MPC5XXX_SRAM_SIZE - 4) -#endif - -/* - * Serial console configuration - */ -#define CONFIG_PSC_CONSOLE 5 /* console is on PSC5 */ -#define CONFIG_SYS_BAUDRATE_TABLE \ - { 9600, 19200, 38400, 57600, 115200, 230400 } - -/* - * PCI Mapping: - * 0x40000000 - 0x4fffffff - PCI Memory - * 0x50000000 - 0x50ffffff - PCI IO Space - */ - -#define CONFIG_PCI_MEM_BUS 0x40000000 -#define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS -#define CONFIG_PCI_MEM_SIZE 0x10000000 - -#define CONFIG_PCI_IO_BUS 0x50000000 -#define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS -#define CONFIG_PCI_IO_SIZE 0x01000000 - -#define CONFIG_SYS_XLB_PIPELINING 1 - -/* Partitions */ - -#define CONFIG_TIMESTAMP /* Print image info with timestamp */ - -#define CONFIG_SYS_ALT_MEMTEST /* Much more complex memory test */ - -/* - * Supported commands - */ -#ifdef CONFIG_PCI -#define CONFIG_CMD_PCI -#endif - -#if (CONFIG_SYS_TEXT_BASE == 0xFC000000) || (CONFIG_SYS_TEXT_BASE == 0xFF000000) -/* Boot low with 16 or 32 MB Flash */ -#define CONFIG_SYS_LOWBOOT 1 -#elif (CONFIG_SYS_TEXT_BASE != 0x00100000) -#error "CONFIG_SYS_TEXT_BASE value is invalid" -#endif - - -#define CONFIG_PREBOOT "run master" - -#undef CONFIG_BOOTARGS - -#if !defined(CONSOLE_DEV) -#define CONSOLE_DEV "ttyPSC1" -#endif - -/* - * Default environment for booting old and new kernel versions - */ -#define CONFIG_IFM_DEFAULT_ENV_OLD \ - "flash_self_old=run ramargs addip addmem;" \ - "bootm ${kernel_addr} ${ramdisk_addr}\0" \ - "flash_nfs_old=run nfsargs addip addmem;" \ - "bootm ${kernel_addr}\0" \ - "net_nfs_old=tftp ${kernel_addr_r} ${bootfile};" \ - "run nfsargs addip addmem;" \ - "bootm ${kernel_addr_r}\0" - -#define CONFIG_IFM_DEFAULT_ENV_NEW \ - "fdt_addr_r=900000\0" \ - "fdt_file="CONFIG_BOARD_NAME"/"CONFIG_BOARD_NAME".dtb\0" \ - "flash_self=run ramargs addip addtty addmisc;" \ - "bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \ - "flash_nfs=run nfsargs addip addtty addmisc;" \ - "bootm ${kernel_addr} - ${fdt_addr}\0" \ - "net_nfs=tftp ${kernel_addr_r} ${bootfile}; " \ - "tftp ${fdt_addr_r} ${fdt_file}; " \ - "run nfsargs addip addtty addmisc;" \ - "bootm ${kernel_addr_r} - ${fdt_addr_r}\0" \ - -#define CONFIG_IFM_DEFAULT_ENV_SETTINGS \ - "IOpin=0x64\0" \ - "addip=setenv bootargs ${bootargs} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ - ":${hostname}:${netdev}:off panic=1\0" \ - "addmem=setenv bootargs ${bootargs} ${memlimit}\0" \ - "addmisc=sete bootargs ${bootargs} ${miscargs}\0" \ - "addtty=sete bootargs ${bootargs} console=" \ - CONSOLE_DEV ",${baudrate}\0" \ - "bootfile="CONFIG_BOARD_NAME"/uImage_"CONFIG_BOARD_NAME"_act\0" \ - "kernel_addr_r=600000\0" \ - "initrd_high=0x03e00000\0" \ - "memlimit=mem="CONFIG_BOARD_MEM_LIMIT"M\0" \ - "memtest=mtest 0x00100000 "__stringify(CONFIG_SYS_MEMTEST_END)" 0 1\0" \ - "netdev=eth0\0" \ - "nfsargs=setenv bootargs root=/dev/nfs rw " \ - "nfsroot=${serverip}:${rootpath}\0" \ - "ramargs=setenv bootargs root=/dev/ram rw\0" \ - "linuxname="CONFIG_BOARD_NAME"/uImage_"CONFIG_BOARD_NAME"_act\0"\ - "progLinux=tftp 200000 ${linuxname};erase ${linbot} ${lintop};" \ - "cp.b ${fileaddr} ${linbot} ${filesize}\0" \ - "ramname="CONFIG_BOARD_NAME"/uRamdisk_"CONFIG_BOARD_NAME"_act\0"\ - "progRam=tftp 200000 ${ramname};erase ${rambot} ${ramtop};" \ - "cp.b ${fileaddr} ${rambot} ${filesize}\0" \ - "jffname="CONFIG_BOARD_NAME"/uJFFS2_"CONFIG_BOARD_NAME"_act\0" \ - "progJff=tftp 200000 ${jffname};erase ${jffbot} ${jfftop};" \ - "cp.b ${fileaddr} ${jffbot} ${filesize}\0" \ - "rootpath=/opt/eldk/ppc_6xx\0" \ - "uboname=" CONFIG_BOARD_NAME \ - "/u-boot.bin_" CONFIG_BOARD_NAME "_act\0" \ - "progubo=tftp 200000 ${uboname};" \ - "protect off ${ubobot} ${ubotop};" \ - "erase ${ubobot} ${ubotop};" \ - "cp.b ${fileaddr} ${ubobot} ${filesize}\0" \ - "unlock=yes\0" \ - "post=echo !!! "CONFIG_BOARD_NAME" POWER ON SELF TEST !!!;" \ - "setenv bootdelay 1;" \ - "crc32 "__stringify(CONFIG_SYS_TEXT_BASE)" " \ - BOARD_POST_CRC32_END";" \ - "setenv bootcmd "CONFIG_BOARD_BOOTCMD";saveenv;reset\0" - -#define CONFIG_BOOTCOMMAND "run post" - -/* - * IPB Bus clocking configuration. - */ -#define CONFIG_SYS_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */ - -#if defined(CONFIG_SYS_IPBCLK_EQUALS_XLBCLK) -/* - * PCI Bus clocking configuration - * - * Actually a PCI Clock of 66 MHz is only set (in cpu_init.c) if - * CONFIG_SYS_IPBCLK_EQUALS_XLBCLK is defined. This is because a PCI Clock - * of 66 MHz yet hasn't been tested with a IPB Bus Clock of 66 MHz. - */ -#define CONFIG_SYS_PCICLK_EQUALS_IPBCLK_DIV2 /* define for 66MHz speed */ -#endif - -/* - * There is no write delay with FRAM, write operations are performed at bus - * speed. Thus, no status polling or write delay is needed. - */ - -/* - * Flash configuration - */ -#define CONFIG_SYS_FLASH_CFI 1 -#define CONFIG_FLASH_CFI_DRIVER 1 -#define CONFIG_FLASH_16BIT -#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT -#define CONFIG_SYS_FLASH_CFI_AMD_RESET -#define CONFIG_SYS_FLASH_EMPTY_INFO - -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of memory banks */ -#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE } -#define CONFIG_SYS_FLASH_ERASE_TOUT 240000 /* Erase Timeout (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Write Timeout (in ms) */ -/* Timeout for Flash Clear Lock Bits (in ms) */ -#define CONFIG_SYS_FLASH_UNLOCK_TOUT 10000 -/* "Real" (hardware) sectors protection */ -#define CONFIG_SYS_FLASH_PROTECTION - -/* - * Environment settings - */ -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_SIZE 0x20000 -#define CONFIG_ENV_SECT_SIZE 0x20000 -#define CONFIG_ENV_OVERWRITE 1 -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x00040000) - -/* - * Memory map - */ -#define CONFIG_SYS_MBAR 0xF0000000 -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_DEFAULT_MBAR 0x80000000 - -/* Use SRAM until RAM will be available */ -#define CONFIG_SYS_INIT_RAM_ADDR MPC5XXX_SRAM -#ifdef CONFIG_POST -/* preserve space for the post_word at end of on-chip SRAM */ -#define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_POST_SIZE -#else -/* End of used area in DPRAM */ -#define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_SIZE -#endif - -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_MONITOR_LEN (192 << 10) /* 192 kB for Monitor */ -#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* 128 kB for malloc() */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial map for Linux */ - -#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) -#define CONFIG_SYS_RAMBOOT 1 -#endif - -/* - * Ethernet configuration - */ -#define CONFIG_MPC5xxx_FEC -#define CONFIG_MPC5xxx_FEC_MII100 -#define CONFIG_PHY_ADDR 0x00 -#define CONFIG_RESET_PHY_R - -/* - * GPIO configuration - */ -#define CONFIG_SYS_GPIO_DATADIR 0x00000064 /* PSC1_2, PSC2_1,2 output */ -#define CONFIG_SYS_GPIO_OPENDRAIN 0x00000000 /* No open drain */ -#define CONFIG_SYS_GPIO_DATAVALUE 0x00000000 /* PSC1_1 to 1, rest to 0 */ -#define CONFIG_SYS_GPIO_ENABLE 0x00000064 /* PSC1_2, PSC2_1,2 enable */ - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_CMDLINE_EDITING - -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) -/* max number of command args */ -#define CONFIG_SYS_MAXARGS 16 -/* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE - -/* default load address */ -#define CONFIG_SYS_LOAD_ADDR 0x100000 - -/* decrementer freq: 1 ms ticks */ - -/* - * Various low-level settings - */ -#define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI -#define CONFIG_SYS_HID0_FINAL HID0_ICE - -#define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE -#define CONFIG_SYS_CS0_START CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_CS0_SIZE CONFIG_SYS_FLASH_SIZE - -#define CONFIG_BOARD_EARLY_INIT_R - -#define CONFIG_SYS_CS_BURST 0x00000000 -#define CONFIG_SYS_CS_DEADCYCLE 0x33333333 - -/* - * DT support - */ -#define OF_CPU "PowerPC,5200@0" -#define OF_SOC "soc5200@f0000000" -#define OF_TBCLK (bd->bi_busfreq / 4) - -#endif /* __O2D_CONFIG_H */ diff --git a/include/configs/o2dnt2.h b/include/configs/o2dnt2.h deleted file mode 100644 index 00a8d9618d..0000000000 --- a/include/configs/o2dnt2.h +++ /dev/null @@ -1,66 +0,0 @@ -/* - * (C) Copyright 2012 - * DENX Software Engineering, Anatolij Gustschin <agust@denx.de> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * Valid values for CONFIG_SYS_TEXT_BASE are: - * 0xFC000000 boot low boot high (standard configuration) - * 0x00100000 boot from RAM (for testing only) - */ -#ifndef CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_TEXT_BASE 0xfc000000 /* Standard: boot low */ -#endif - -/* Board specific flash config */ -#define CONFIG_SYS_FLASH_BASE 0xfc000000 -#define CONFIG_SYS_FLASH_SIZE 0x04000000 /* maximum 64MB */ -/* max number of sectors on one chip */ -#define CONFIG_SYS_MAX_FLASH_SECT 512 - -/* - * Include common defines for all ifm boards - */ -#include "o2dnt-common.h" - -/* - * GPIO configuration: - * CS1 SDRAM activate + no CAN + no PCI - */ -#define CONFIG_SYS_GPS_PORT_CONFIG 0x8000A004 - -/* Other board specific configs */ -#define CONFIG_SYS_BOOTCS_CFG 0x00057d01 -#define CONFIG_SYS_RESET_ADDRESS 0xfc000000 - -#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x07f00000 /* 1 - 127 MB in DRAM */ - -#define CONFIG_BOARD_NAME "o2dnt2" -#define CONFIG_BOARD_BOOTCMD "run flash_self" -#define CONFIG_BOARD_MEM_LIMIT __stringify(126) -#define BOARD_POST_CRC32_END __stringify(0x01000000) - -#define CONFIG_EXTRA_ENV_SETTINGS \ - CONFIG_IFM_DEFAULT_ENV_SETTINGS \ - CONFIG_IFM_DEFAULT_ENV_OLD \ - CONFIG_IFM_DEFAULT_ENV_NEW \ - "linbot=fc060000\0" \ - "lintop=fc15ffff\0" \ - "rambot=fc160000\0" \ - "ramtop=fc55ffff\0" \ - "jffbot=fc560000\0" \ - "jfftop=fce5ffff\0" \ - "ubobot=" __stringify(CONFIG_SYS_FLASH_BASE) "\0" \ - "ubotop=fc03ffff\0" \ - "calname="CONFIG_BOARD_NAME"/uCal_"CONFIG_BOARD_NAME"_act\0" \ - "calbot=fce60000\0" \ - "caltop=fcffffff\0" \ - "progCal=tftp 200000 ${calname};erase ${calbot} ${caltop};" \ - "cp.b ${fileaddr} ${calbot} ${filesize}\0" \ - "kernel_addr=0xfc060000\0" \ - "ramdisk_addr=0xfc160000\0" \ - "master=mw f0000b00 0x8005A006;mw f0000b0c ${IOpin};" \ - "mw f0000b04 ${IOpin};mw f0000b10 0x20\0" diff --git a/include/configs/o2i.h b/include/configs/o2i.h deleted file mode 100644 index c0fcedaf10..0000000000 --- a/include/configs/o2i.h +++ /dev/null @@ -1,66 +0,0 @@ -/* - * (C) Copyright 2012 - * DENX Software Engineering, Anatolij Gustschin <agust@denx.de> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * Valid values for CONFIG_SYS_TEXT_BASE are: - * 0xFF000000 boot low boot high (standard configuration) - * 0x00100000 boot from RAM (for testing only) - */ -#ifndef CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_TEXT_BASE 0xff000000 /* Standard: boot low */ -#endif - -/* Board specific flash config */ -#define CONFIG_SYS_FLASH_BASE 0xff000000 -#define CONFIG_SYS_FLASH_SIZE 0x01000000 /* maximum 16MB */ -/* max number of sectors on one chip */ -#define CONFIG_SYS_MAX_FLASH_SECT 128 - -/* - * Include common defines for all ifm boards - */ -#include "o2dnt-common.h" - -/* GPIO configuration */ -#define CONFIG_SYS_GPS_PORT_CONFIG 0x00002006 /* no CAN */ - -/* Other board specific configs */ -#define CONFIG_SYS_BOOTCS_CFG 0x00087801 -#define CONFIG_SYS_RESET_ADDRESS 0xff000000 - -#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x03f00000 /* 1 - 63 MB in DRAM */ - -#define CONFIG_BOARD_NAME "o2i" -#define CONFIG_BOARD_BOOTCMD "run dhcp_boot" -#define CONFIG_BOARD_MEM_LIMIT __stringify(62) -#define BOARD_POST_CRC32_END __stringify(0x01000000) - -#define CONFIG_EXTRA_ENV_SETTINGS \ - CONFIG_IFM_DEFAULT_ENV_SETTINGS \ - CONFIG_IFM_DEFAULT_ENV_OLD \ - CONFIG_IFM_DEFAULT_ENV_NEW \ - "linbot=ff060000\0" \ - "lintop=ff15ffff\0" \ - "rambot=ff160000\0" \ - "ramtop=ff55ffff\0" \ - "jffbot=ff560000\0" \ - "jfftop=ffebffff\0" \ - "kernel_addr=0xff060000\0" \ - "ramdisk_addr=0xff160000\0" \ - "ubobot=" __stringify(CONFIG_SYS_FLASH_BASE) "\0" \ - "ubotop=ff03ffff\0" \ - "autoload=no\0" \ - "dhcp_boot=run dhcpcmd; run flash_mtd\0" \ - "hostname=IFM_SENSOR\0" \ - "flash_mtd=run mtd_args addip addmem;bootm ${kernel_addr}\0" \ - "mtd_args=setenv bootargs root=/dev/mtdblock3 " \ - "rw rootfstype=cramfs\0" \ - "sensorType=O2I100AA\0" \ - "netretry=once\0" \ - "master=mw f0000b00 0x00052006;mw f0000b0c ${IOpin};" \ - "mw f0000b04 ${IOpin};mw f0000b10 0x20\0" diff --git a/include/configs/o2mnt.h b/include/configs/o2mnt.h deleted file mode 100644 index eb63cb0c85..0000000000 --- a/include/configs/o2mnt.h +++ /dev/null @@ -1,74 +0,0 @@ -/* - * (C) Copyright 2012 - * DENX Software Engineering, Anatolij Gustschin <agust@denx.de> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * Valid values for CONFIG_SYS_TEXT_BASE are: - * 0xFF000000 boot low boot high (standard configuration) - * 0x00100000 boot from RAM (for testing only) - */ -#ifndef CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_TEXT_BASE 0xff000000 /* Standard: boot low */ -#endif - -/* Board specific flash config */ -#define CONFIG_SYS_FLASH_BASE 0xff000000 -#define CONFIG_SYS_FLASH_SIZE 0x01000000 /* maximum 16MB */ -/* max number of sectors on one chip */ -#define CONFIG_SYS_MAX_FLASH_SECT 128 - -/* - * Include common defines for all ifm boards - */ -#include "o2dnt-common.h" - -/* GPIO configuration */ -#define CONFIG_SYS_GPS_PORT_CONFIG 0x00002004 /* no CAN */ - -/* Other board specific configs */ -#define CONFIG_NETCONSOLE - -#define CONFIG_SYS_BOOTCS_CFG 0x00087801 -#define CONFIG_SYS_RESET_ADDRESS 0xff000000 - -#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x03f00000 /* 1 - 63 MB in DRAM */ - -#define CONFIG_BOARD_NAME "o2mnt" -#define CONFIG_BOARD_BOOTCMD "${newcmd}" -#define CONFIG_BOARD_MEM_LIMIT __stringify(62) -#define BOARD_POST_CRC32_END __stringify(0x01000000) - -#ifndef CONFIG_IFM_SENSOR_TYPE -#define CONFIG_IFM_SENSOR_TYPE "O2M110" -#endif - -#define CONFIG_EXTRA_ENV_SETTINGS \ - CONFIG_IFM_DEFAULT_ENV_SETTINGS \ - CONFIG_IFM_DEFAULT_ENV_OLD \ - CONFIG_IFM_DEFAULT_ENV_NEW \ - "linbot=ff060000\0" \ - "lintop=ff25ffff\0" \ - "rambot=ff260000\0" \ - "ramtop=ffc5ffff\0" \ - "jffbot=ffc60000\0" \ - "jfftop=ffffffff\0" \ - "ubobot=" __stringify(CONFIG_SYS_FLASH_BASE) "\0" \ - "ubotop=ff03ffff\0" \ - "kernel_addr=0xff060000\0" \ - "ramdisk_addr=0xff260000\0" \ - "newcmd=run scrprot;run flash_ext2\0" \ - "scrprot=protect on ${linbot} ${lintop};protect on ${rambot} " \ - "${ramtop}\0" \ - "flash_ext2=run ext2args addip addmem;bootm ${kernel_addr}\0" \ - "ext2args=setenv bootargs root=/dev/mtdblock3 ro " \ - "rootfstype=ext2\0" \ - "pwm=mw f0000674 0x10006;mw f0000678 0x30000;" \ - "mw f0000678 0x30001;mw f0000670 0x3\0" \ - "master=mw f0000b00 0x00052006;mw f0000b0c $(IOpin);" \ - "mw f0000b04 $(IOpin);mw f0000b10 0x24;run pwm\0" \ - "sensortyp="CONFIG_IFM_SENSOR_TYPE"\0" \ - "srelease=0.00\0" diff --git a/include/configs/o3dnt.h b/include/configs/o3dnt.h deleted file mode 100644 index f0fcedaffc..0000000000 --- a/include/configs/o3dnt.h +++ /dev/null @@ -1,69 +0,0 @@ -/* - * (C) Copyright 2012 - * DENX Software Engineering, Anatolij Gustschin <agust@denx.de> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * Valid values for CONFIG_SYS_TEXT_BASE are: - * 0xFC000000 boot low boot high (standard configuration) - * 0x00100000 boot from RAM (for testing only) - */ -#ifndef CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_TEXT_BASE 0xfc000000 /* Standard: boot low */ -#endif - -/* Board specific flash config */ -#define CONFIG_SYS_FLASH_BASE 0xfc000000 -#define CONFIG_SYS_FLASH_SIZE 0x04000000 /* maximum 64MB */ -/* max number of sectors on one chip */ -#define CONFIG_SYS_MAX_FLASH_SECT 512 - -/* - * Include common defines for all ifm boards - */ -#include "o2dnt-common.h" - -/* Additional commands */ -#define CONFIG_CMD_REGINFO - -/* - * GPIO configuration: - * no CAN + no PCI - */ -#define CONFIG_SYS_GPS_PORT_CONFIG 0x0000A000 - -/* Other board specific configs */ -#define CONFIG_SYS_BOOTCS_CFG 0x00057d01 -#define CONFIG_SYS_RESET_ADDRESS 0xfc000000 - -#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x03f00000 /* 1 - 63 MB in DRAM */ - -#define CONFIG_BOARD_NAME "o3dnt" -#define CONFIG_BOARD_BOOTCMD "run flash_self" -#define CONFIG_BOARD_MEM_LIMIT __stringify(62) -#define BOARD_POST_CRC32_END __stringify(0x01000000) - -#define CONFIG_EXTRA_ENV_SETTINGS \ - CONFIG_IFM_DEFAULT_ENV_SETTINGS \ - CONFIG_IFM_DEFAULT_ENV_OLD \ - CONFIG_IFM_DEFAULT_ENV_NEW \ - "linbot=fc060000\0" \ - "lintop=fc15ffff\0" \ - "rambot=fc160000\0" \ - "ramtop=fc55ffff\0" \ - "jffbot=fc560000\0" \ - "jfftop=fce5ffff\0" \ - "ubobot=" __stringify(CONFIG_SYS_FLASH_BASE) "\0" \ - "ubotop=fc03ffff\0" \ - "calname="CONFIG_BOARD_NAME"/uCal_"CONFIG_BOARD_NAME"_act\0" \ - "calbot=fce60000\0" \ - "caltop=fcffffff\0" \ - "progCal=tftp 200000 ${calname};erase ${calbot} ${caltop};" \ - "cp.b ${fileaddr} ${calbot} ${filesize}\0" \ - "kernel_addr=0xfc060000\0" \ - "ramdisk_addr=0xfc160000\0" \ - "master=mw f0000b00 0x0005A006;mw f0000b0c ${IOpin};" \ - "mw f0000b04 ${IOpin};mw f0000b10 0x20\0" diff --git a/include/configs/pcm030.h b/include/configs/pcm030.h deleted file mode 100644 index 500277f7f0..0000000000 --- a/include/configs/pcm030.h +++ /dev/null @@ -1,376 +0,0 @@ -/* - * (C) Copyright 2003-2005 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * (C) Copyright 2006 - * Eric Schumann, Phytec Messatechnik GmbH - * - * (C) Copyright 2009 - * Jon Smirl <jonsmirl@gmail.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#define CONFIG_BOARDINFO "phyCORE-MPC5200B-tiny" - -/*----------------------------------------------------------------------------- -High Level Configuration Options -(easy to change) ------------------------------------------------------------------------------*/ -#define CONFIG_MPC5200 1 /* This is an MPC5200 CPU */ -#define CONFIG_MPC5200_DDR 1 /* (with DDR-SDRAM) */ -#define CONFIG_PHYCORE_MPC5200B_TINY 1 /* phyCORE-MPC5200B -> */ - /* FEC configuration and IDE */ - -/* - * Valid values for CONFIG_SYS_TEXT_BASE are: - * 0xFFF00000 boot high (standard configuration) - * 0xFF000000 boot low - * 0x00100000 boot from RAM (for testing only) - */ -#ifndef CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_TEXT_BASE 0xFFF00000 -#endif - -#define CONFIG_SYS_MPC5XXX_CLKIN 33333333 /* ... running at 33.333333MHz */ - -/*----------------------------------------------------------------------------- -Serial console configuration ------------------------------------------------------------------------------*/ -#define CONFIG_PSC_CONSOLE 3 /* console is on PSC3 -> */ - /*define gps port conf. */ - /* register later on to */ - /*enable UART function! */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } - -/* - * Command line configuration. - */ -#define CONFIG_CMD_PCI - -#define CONFIG_TIMESTAMP 1 /* Print image info with timestamp */ - -#if (CONFIG_SYS_TEXT_BASE == 0xFF000000) /* Boot low */ -#define CONFIG_SYS_LOWBOOT 1 -#endif -/* RAMBOOT will be defined automatically in memory section */ - -#define CONFIG_JFFS2_CMDLINE -#define MTDIDS_DEFAULT "nor0=physmap-flash.0" -#define MTDPARTS_DEFAULT "mtdparts=physmap-flash.0:256k(ubootl)," \ - "1792k(kernel),13312k(jffs2),256k(uboot)ro,256k(oftree),-(space)" - -#undef CONFIG_BOOTARGS - -#define CONFIG_PREBOOT "echo;" \ - "echo Type \"run bootcmd_net\" to load Kernel over TFTP and to "\ - "mount root filesystem over NFS;" \ - "echo" - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "netdev=eth0\0" \ - "uimage=uImage-pcm030\0" \ - "oftree=oftree-pcm030.dtb\0" \ - "jffs2=root-pcm030.jffs2\0" \ - "uboot=u-boot-pcm030.bin\0" \ - "bargs_base=setenv bootargs console=ttyPSC0,$(baudrate)" \ - " $(mtdparts) rw\0" \ - "bargs_flash=setenv bootargs $(bootargs) root=/dev/mtdblock2" \ - " rootfstype=jffs2\0" \ - "bargs_nfs=setenv bootargs $(bootargs) root=/dev/nfs" \ - " ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)::" \ - "$(netdev):off nfsroot=$(serverip):$(nfsrootfs),v3,tcp\0" \ - "bcmd_net=run bargs_base bargs_nfs; tftpboot 0x500000 $(uimage);" \ - " tftp 0x400000 $(oftree); bootm 0x500000 - 0x400000\0" \ - "bcmd_flash=run bargs_base bargs_flash; bootm 0xff040000 - " \ - "0xfff40000\0" \ - " cp.b 0x400000 0xff040000 $(filesize)\0" \ - "prg_jffs2=tftp 0x400000 $(jffs2); erase 0xff200000 0xffefffff; " \ - "cp.b 0x400000 0xff200000 $(filesize)\0" \ - "prg_oftree=tftp 0x400000 $(oftree); erase 0xfff40000 0xfff5ffff;" \ - " cp.b 0x400000 0xfff40000 $(filesize)\0" \ - "update=tftpboot 0x400000 $(uboot);erase 0xFFF00000 0xfff3ffff;" \ - " cp.b 0x400000 0xFFF00000 $(filesize)\0" \ - "unlock=yes\0" \ - "" - -#define CONFIG_BOOTCOMMAND "run bcmd_flash" - -/*-------------------------------------------------------------------------- -IPB Bus clocking configuration. - ---------------------------------------------------------------------------*/ -#define CONFIG_SYS_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */ - -/*------------------------------------------------------------------------- - * PCI Mapping: - * 0x40000000 - 0x4fffffff - PCI Memory - * 0x50000000 - 0x50ffffff - PCI IO Space - * -----------------------------------------------------------------------*/ -#define CONFIG_PCI_SCAN_SHOW 1 -#define CONFIG_PCI_MEM_BUS 0x40000000 -#define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS -#define CONFIG_PCI_MEM_SIZE 0x10000000 -#define CONFIG_PCI_IO_BUS 0x50000000 -#define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS -#define CONFIG_PCI_IO_SIZE 0x01000000 -#define CONFIG_SYS_XLB_PIPELINING 1 - -/*--------------------------------------------------------------------------- - Flash configuration ----------------------------------------------------------------------------*/ - -#define CONFIG_SYS_FLASH_BASE 0xff000000 -#define CONFIG_SYS_FLASH_SIZE 0x01000000 -#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE } - -#define CONFIG_SYS_FLASH_CFI 1 /* Flash is CFI conformant */ -#define CONFIG_FLASH_CFI_DRIVER 1 /* Use the common driver */ -#define CONFIG_SYS_FLASH_EMPTY_INFO -#define CONFIG_SYS_MAX_FLASH_SECT 260 /* max num of sects on one chip */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of flash banks */ - /* (= chip selects) */ -#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE - -/* - * Use also hardware protection. This seems required, as the BDI uses - * hardware protection. Without this, U-Boot can't work with this sectors, - * as its protection is software only by default - */ -#define CONFIG_SYS_FLASH_PROTECTION 1 - -/*--------------------------------------------------------------------------- - Environment settings ----------------------------------------------------------------------------*/ - -#define CONFIG_ENV_IS_NOWHERE -#define CONFIG_ENV_OFFSET 0x00 /* environment starts at the */ - /*beginning of the EEPROM */ -#define CONFIG_ENV_SIZE 2048 - -#define CONFIG_ENV_OVERWRITE 1 - -/*----------------------------------------------------------------------------- - Memory map ------------------------------------------------------------------------------*/ -#define CONFIG_SYS_MBAR 0xF0000000 /* MBAR has to be switched by other */ - /* bootloader or debugger config */ -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_DEFAULT_MBAR 0x80000000 -/* Use SRAM until RAM will be available */ -#define CONFIG_SYS_INIT_RAM_ADDR MPC5XXX_SRAM -#define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_SIZE /* Size of used */ - /* area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE -#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) -# define CONFIG_SYS_RAMBOOT 1 -#endif - -#define CONFIG_SYS_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */ -#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ - -/*----------------------------------------------------------------------------- - Ethernet configuration ------------------------------------------------------------------------------*/ -#define CONFIG_MPC5xxx_FEC 1 -#define CONFIG_MPC5xxx_FEC_MII100 -#define CONFIG_PHY_ADDR 0x01 - -/*--------------------------------------------------------------------------- - GPIO configuration - ---------------------------------------------------------------------------*/ - -/* GPIO port configuration - * - * Pin mapping: - * - * [29:31] = 01x - * PSC1_0 -> AC97 SDATA out - * PSC1_1 -> AC97 SDTA in - * PSC1_2 -> AC97 SYNC out - * PSC1_3 -> AC97 bitclock out - * PSC1_4 -> AC97 reset out - * - * [25:27] = 001 - * PSC2_0 -> CAN 1 Tx out - * PSC2_1 -> CAN 1 Rx in - * PSC2_2 -> CAN 2 Tx out - * PSC2_3 -> CAN 2 Rx in - * PSC2_4 -> GPIO (claimed for ATA reset, active low) - * - * - * [20:23] = 1100 - * PSC3_0 -> UART Tx out - * PSC3_1 -> UART Rx in - * PSC3_2 -> UART RTS (in/out FIXME) - * PSC3_3 -> UART CTS (in/out FIXME) - * PSC3_4 -> LocalPlus Bus CS6 \ - * PSC3_5 -> LocalPlus Bus CS7 / --> see [4] and [5] - * PSC3_6 -> dedicated SPI MOSI out (master case) - * PSC3_7 -> dedicated SPI MISO in (master case) - * PSC3_8 -> dedicated SPI SS out (master case) - * PSC3_9 -> dedicated SPI CLK out (master case) - * - * [18:19] = 01 - * USB_0 -> USB OE out - * USB_1 -> USB Tx- out - * USB_2 -> USB Tx+ out - * USB_3 -> USB RxD (in/out FIXME) - * USB_4 -> USB Rx+ in - * USB_5 -> USB Rx- in - * USB_6 -> USB PortPower out - * USB_7 -> USB speed out - * USB_8 -> USB suspend (in/out FIXME) - * USB_9 -> USB overcurrent in - * - * [17] = 0 - * USB differential mode - * - * [16] = 0 - * PCI enabled - * - * [12:15] = 0101 - * ETH_0 -> ETH Txen - * ETH_1 -> ETH TxD0 - * ETH_2 -> ETH TxD1 - * ETH_3 -> ETH TxD2 - * ETH_4 -> ETH TxD3 - * ETH_5 -> ETH Txerr - * ETH_6 -> ETH MDC - * ETH_7 -> ETH MDIO - * ETH_8 -> ETH RxDv - * ETH_9 -> ETH RxCLK - * ETH_10 -> ETH Collision - * ETH_11 -> ETH TxD - * ETH_12 -> ETH RxD0 - * ETH_13 -> ETH RxD1 - * ETH_14 -> ETH RxD2 - * ETH_15 -> ETH RxD3 - * ETH_16 -> ETH Rxerr - * ETH_17 -> ETH CRS - * - * [9:11] = 101 - * PSC6_0 -> UART RxD in - * PSC6_1 -> UART CTS (in/out FIXME) - * PSC6_2 -> UART TxD out - * PSC6_3 -> UART RTS (in/out FIXME) - * - * [2:3/6:7] = 00/11 - * TMR_0 -> ATA_CS0 out - * TMR_1 -> ATA_CS1 out - * TMR_2 -> GPIO - * TMR_3 -> GPIO - * TMR_4 -> GPIO - * TMR_5 -> GPIO - * TMR_6 -> GPIO - * TMR_7 -> GPIO - * I2C_0 -> I2C 1 Clock out - * I2C_1 -> I2C 1 IO in/out - * I2C_2 -> I2C 2 Clock out - * I2C_3 -> I2C 2 IO in/out - * - * [4] = 1 - * PSC3_5 is used as CS7 - * - * [5] = 1 - * PSC3_4 is used as CS6 - * - * [1] = 0 - * gpio_wkup_7 is GPIO - * - * [0] = 0 - * gpio_wkup_6 is GPIO - * - */ -#define CONFIG_SYS_GPS_PORT_CONFIG 0x0f551c12 - -/*----------------------------------------------------------------------------- - Miscellaneous configurable options --------------------------------------------------------------------------------*/ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ - -#define CONFIG_CMDLINE_EDITING 1 /* add command line history */ - -#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) - /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0x400000 /* default load address */ - -/*----------------------------------------------------------------------------- - Various low-level settings ------------------------------------------------------------------------------*/ -#define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI -#define CONFIG_SYS_HID0_FINAL HID0_ICE - -/* no burst access on the LPB */ -#define CONFIG_SYS_CS_BURST 0x00000000 -/* one deadcycle for the 33MHz statemachine */ -#define CONFIG_SYS_CS_DEADCYCLE 0x33333331 -/* one additional waitstate for the 33MHz statemachine */ -#define CONFIG_SYS_BOOTCS_CFG 0x0001dd00 -#define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE - -#define CONFIG_SYS_RESET_ADDRESS 0xff000000 - -/*----------------------------------------------------------------------- - * USB stuff - *----------------------------------------------------------------------- - */ -#define CONFIG_USB_CLOCK 0x0001BBBB -#define CONFIG_USB_CONFIG 0x00001000 - -/*--------------------------------------------------------------------------- - IDE/ATA stuff Supports IDE harddisk -----------------------------------------------------------------------------*/ - -#undef CONFIG_IDE_LED /* LED for ide not supported */ -#define CONFIG_SYS_ATA_CS_ON_TIMER01 -#define CONFIG_IDE_RESET 1 /* reset for ide supported */ -#define CONFIG_IDE_PREINIT -#define CONFIG_SYS_IDE_MAXBUS 1 /* max. 1 IDE bus */ -#define CONFIG_SYS_IDE_MAXDEVICE 2 /* max. 2 drives per IDE bus */ -#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000 -#define CONFIG_SYS_ATA_BASE_ADDR MPC5XXX_ATA -/* Offset for data I/O */ -#define CONFIG_SYS_ATA_DATA_OFFSET (0x0060) -/* Offset for normal register accesses */ -#define CONFIG_SYS_ATA_REG_OFFSET (CONFIG_SYS_ATA_DATA_OFFSET) -/* Offset for alternate registers */ -#define CONFIG_SYS_ATA_ALT_OFFSET (0x005C) -/* Interval between registers */ -#define CONFIG_SYS_ATA_STRIDE 4 -#define CONFIG_ATAPI 1 - -/* USB */ -#define CONFIG_USB_OHCI - -/* pass open firmware flat tree */ -#define OF_CPU "PowerPC,5200@0" -#define OF_TBCLK CONFIG_SYS_MPC5XXX_CLKIN -#define OF_SOC "soc5200@f0000000" -#define OF_STDOUT_PATH "/soc5200@f0000000/serial@2400" - -#endif /* __CONFIG_H */ diff --git a/include/configs/pdm360ng.h b/include/configs/pdm360ng.h deleted file mode 100644 index 676d55f5e8..0000000000 --- a/include/configs/pdm360ng.h +++ /dev/null @@ -1,420 +0,0 @@ -/* - * (C) Copyright 2009-2010 - * Michael Weiß, ifm ecomatic gmbh, michael.weiss@ifm.com - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * pdm360ng board configuration file - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#define CONFIG_PDM360NG 1 - -/* - * Memory map for the PDM360NG board: - * - * 0x0000_0000 - 0x1FFF_FFFF DDR RAM (512 MB) - * 0x2000_0000 - 0x3FFF_FFFF reserved (DDR RAM (512 MB) - * 0x5000_0000 - 0x5001_FFFF SRAM (128 KB) - * 0x5004_0000 - 0x5005_FFFF MRAM (CS2) (128 KB) - * 0x8000_0000 - 0x803F_FFFF IMMR (4 MB) - * 0xF000_0000 - 0xF7FF_FFFF NOR FLASH (CS0) (128 MB) - * 0xF800_0000 - 0xFFFF_FFFF NOR FLASH (CS1) (128 MB) optional - */ - -/* - * High Level Configuration Options - */ -#define CONFIG_E300 1 /* E300 Family */ -#define CONFIG_FSL_DIU_FB 1 /* FSL DIU */ - -#define CONFIG_SYS_TEXT_BASE 0xF0000000 - -/* Used for silent command in environment */ -#define CONFIG_SYS_DEVICE_NULLDEV - -/* Video */ - -#if defined(CONFIG_VIDEO) -#define CONFIG_SPLASH_SCREEN -#define CONFIG_VIDEO_LOGO -#define CONFIG_VIDEO_BMP_RLE8 -#endif - -#define CONFIG_SYS_MPC512X_CLKIN 33333333 /* in Hz */ - -#define CONFIG_MISC_INIT_R - -#define CONFIG_SYS_IMMR 0x80000000 -#define CONFIG_SYS_DIU_ADDR ((CONFIG_SYS_IMMR) + 0x2100) - -/* - * DDR Setup - */ - -/* DDR is system memory */ -#define CONFIG_SYS_DDR_BASE 0x00000000 -#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_BASE -#define CONFIG_SYS_MAX_RAM_SIZE 0x40000000 - -/* DDR pin mux and slew rate */ -#define CONFIG_SYS_IOCTRL_MUX_DDR 0x00000012 - -/* Manually set all parameters as there's no SPD etc. */ -/* - * DDR Controller Configuration for Micron DDR2 SDRAM MT47H128M8-3 - * - * SYS_CFG: - * [31:31] MDDRC Soft Reset: Diabled - * [30:30] DRAM CKE pin: Enabled - * [29:29] DRAM CLK: Enabled - * [28:28] Command Mode: Enabled (For initialization only) - * [27:25] DRAM Row Select: dram_row[15:0] = magenta_address[25:10] - * [24:21] DRAM Bank Select: dram_bank[1:0] = magenta_address[11:10] - * [20:19] Read Test: DON'T USE - * [18:18] Self Refresh: Enabled - * [17:17] 16bit Mode: Disabled - * [16:13] Read Delay: 3 - * [12:12] Half DQS Delay: Disabled - * [11:11] Quarter DQS Delay: Disabled - * [10:08] Write Delay: 2 - * [07:07] Early ODT: Disabled - * [06:06] On DIE Termination: Enabled - * [05:05] FIFO Overflow Clear: DON'T USE here - * [04:04] FIFO Underflow Clear: DON'T USE here - * [03:03] FIFO Overflow Pending: DON'T USE here - * [02:02] FIFO Underlfow Pending: DON'T USE here - * [01:01] FIFO Overlfow Enabled: Enabled - * [00:00] FIFO Underflow Enabled: Enabled - * TIME_CFG0 - * [31:16] DRAM Refresh Time: 0 CSB clocks - * [15:8] DRAM Command Time: 0 CSB clocks - * [07:00] DRAM Precharge Time: 0 CSB clocks - * TIME_CFG1 - * [31:26] DRAM tRFC: - * [25:21] DRAM tWR1: - * [20:17] DRAM tWRT1: - * [16:11] DRAM tDRR: - * [10:05] DRAM tRC: - * [04:00] DRAM tRAS: - * TIME_CFG2 - * [31:28] DRAM tRCD: - * [27:23] DRAM tFAW: - * [22:19] DRAM tRTW1: - * [18:15] DRAM tCCD: - * [14:10] DRAM tRTP: - * [09:05] DRAM tRP: - * [04:00] DRAM tRPA - */ -#define CONFIG_SYS_MDDRC_SYS_CFG 0xEA804A40 -#define CONFIG_SYS_MDDRC_TIME_CFG0 0x030C3D2E -#define CONFIG_SYS_MDDRC_TIME_CFG1 0x68EC1168 -#define CONFIG_SYS_MDDRC_TIME_CFG2 0x34310864 - -/* - * Alternative 1: small RAM (128 MB) configuration - */ -#define CONFIG_SYS_MDDRC_SYS_CFG_ALT1 0xE8604A40 -#define CONFIG_SYS_MDDRC_TIME_CFG0_ALT1 0x030C3D2E -#define CONFIG_SYS_MDDRC_TIME_CFG1_ALT1 0x3CEC1168 -#define CONFIG_SYS_MDDRC_TIME_CFG2_ALT1 0x33310863 - -#define CONFIG_SYS_MDDRC_SYS_CFG_EN 0xF0000000 - -#define CONFIG_SYS_DDRCMD_NOP 0x01380000 -#define CONFIG_SYS_DDRCMD_PCHG_ALL 0x01100400 -#define CONFIG_SYS_DDRCMD_EM2 0x01020000 /* EMR2 */ -#define CONFIG_SYS_DDRCMD_EM3 0x01030000 /* EMR3 */ -/* EMR with 150 ohm ODT todo: verify */ -#define CONFIG_SYS_DDRCMD_EN_DLL 0x01010040 -#define CONFIG_SYS_DDRCMD_RES_DLL 0x01000100 -#define CONFIG_SYS_DDRCMD_RFSH 0x01080000 -#define CONFIG_SYS_MICRON_INIT_DEV_OP 0x01000432 -/* EMR with 150 ohm ODT todo: verify */ -#define CONFIG_SYS_DDRCMD_OCD_DEFAULT 0x010107C0 -/* EMR new command with 150 ohm ODT todo: verify */ -#define CONFIG_SYS_DDRCMD_OCD_EXIT 0x01010440 - -/* DDR Priority Manager Configuration */ -#define CONFIG_SYS_MDDRCGRP_PM_CFG1 0x00077777 -#define CONFIG_SYS_MDDRCGRP_PM_CFG2 0x00000000 -#define CONFIG_SYS_MDDRCGRP_HIPRIO_CFG 0x00000001 -#define CONFIG_SYS_MDDRCGRP_LUT0_MU 0xFFEEDDCC -#define CONFIG_SYS_MDDRCGRP_LUT0_ML 0xBBAAAAAA -#define CONFIG_SYS_MDDRCGRP_LUT1_MU 0x66666666 -#define CONFIG_SYS_MDDRCGRP_LUT1_ML 0x55555555 -#define CONFIG_SYS_MDDRCGRP_LUT2_MU 0x44444444 -#define CONFIG_SYS_MDDRCGRP_LUT2_ML 0x44444444 -#define CONFIG_SYS_MDDRCGRP_LUT3_MU 0x55555555 -#define CONFIG_SYS_MDDRCGRP_LUT3_ML 0x55555558 -#define CONFIG_SYS_MDDRCGRP_LUT4_MU 0x11111111 -#define CONFIG_SYS_MDDRCGRP_LUT4_ML 0x11111122 -#define CONFIG_SYS_MDDRCGRP_LUT0_AU 0xaaaaaaaa -#define CONFIG_SYS_MDDRCGRP_LUT0_AL 0xaaaaaaaa -#define CONFIG_SYS_MDDRCGRP_LUT1_AU 0x66666666 -#define CONFIG_SYS_MDDRCGRP_LUT1_AL 0x66666666 -#define CONFIG_SYS_MDDRCGRP_LUT2_AU 0x11111111 -#define CONFIG_SYS_MDDRCGRP_LUT2_AL 0x11111111 -#define CONFIG_SYS_MDDRCGRP_LUT3_AU 0x11111111 -#define CONFIG_SYS_MDDRCGRP_LUT3_AL 0x11111111 -#define CONFIG_SYS_MDDRCGRP_LUT4_AU 0x11111111 -#define CONFIG_SYS_MDDRCGRP_LUT4_AL 0x11111111 - -/* - * NOR FLASH on the Local Bus - */ -#define CONFIG_SYS_FLASH_CFI /* use Common Flash Interface */ -#define CONFIG_FLASH_CFI_DRIVER /* use the CFI driver */ -#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE - -#define CONFIG_SYS_FLASH_BASE 0xF0000000 /* start of FLASH-Bank0 */ -#define CONFIG_SYS_FLASH_SIZE 0x08000000 /* max size of a Bank */ -/* start of FLASH-Bank1 */ -#define CONFIG_SYS_FLASH1_BASE (CONFIG_SYS_FLASH_BASE + \ - CONFIG_SYS_FLASH_SIZE) -#define CONFIG_SYS_MAX_FLASH_SECT 512 /* max sectors per device */ -#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */ -#define CONFIG_SYS_FLASH_BANKS_LIST \ - {CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH1_BASE} - -#define CONFIG_SYS_SRAM_BASE 0x50000000 -#define CONFIG_SYS_SRAM_SIZE 0x00020000 /* 128 KB */ - -#define CONFIG_SYS_CS1_START CONFIG_SYS_FLASH1_BASE -#define CONFIG_SYS_CS1_SIZE CONFIG_SYS_FLASH_SIZE - -/* ALE active low, data size 4 bytes */ -#define CONFIG_SYS_CS0_CFG 0x05059350 -/* ALE active low, data size 4 bytes */ -#define CONFIG_SYS_CS1_CFG 0x05059350 - -#define CONFIG_SYS_MRAM_BASE 0x50040000 -#define CONFIG_SYS_MRAM_SIZE 0x00020000 -#define CONFIG_SYS_CS2_START CONFIG_SYS_MRAM_BASE -#define CONFIG_SYS_CS2_SIZE CONFIG_SYS_MRAM_SIZE - -/* ALE active low, data size 4 bytes */ -#define CONFIG_SYS_CS2_CFG 0x05059110 - -/* alt. CS timing for CS0, CS1, CS2 */ -#define CONFIG_SYS_CS_ALETIMING 0x00000007 - -/* - * NAND FLASH - */ -#define CONFIG_CMD_NAND /* enable NAND support */ -#define CONFIG_NAND_MPC5121_NFC -#define CONFIG_SYS_NAND_BASE 0x40000000 -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_SYS_NAND_SELECT_DEVICE /* driver supports mutipl. chips */ - -/* - * Configuration parameters for MPC5121 NAND driver - */ -#define CONFIG_FSL_NFC_WIDTH 1 -#define CONFIG_FSL_NFC_WRITE_SIZE 2048 -#define CONFIG_FSL_NFC_SPARE_SIZE 64 -#define CONFIG_FSL_NFC_CHIPS CONFIG_SYS_MAX_NAND_DEVICE - -/* - * Dynamic MTD partition support - */ -#define CONFIG_CMD_MTDPARTS -#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ -#define CONFIG_FLASH_CFI_MTD -#define MTDIDS_DEFAULT "nor0=f0000000.flash,nor1=f8000000.flash," \ - "nand0=MPC5121 NAND" - -/* - * Flash layout - */ -#define MTDPARTS_DEFAULT "mtdparts=f0000000.flash:512k(u-boot)," \ - "256k(environment1)," \ - "256k(environment2)," \ - "256k(splash-factory)," \ - "2m(FIT: recovery)," \ - "4608k(fs-recovery)," \ - "256k(splash-customer),"\ - "5m(FIT: kernel+dtb)," \ - "64m(rootfs squash)ro," \ - "51m(userfs ubi);" \ - "f8000000.flash:-(unused);" \ - "MPC5121 NAND:1024m(extended-userfs)" - -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* Start of monitor */ -#define CONFIG_SYS_MONITOR_LEN (512 * 1024) /* 512 kB for monitor */ -#ifdef CONFIG_FSL_DIU_FB -#define CONFIG_SYS_MALLOC_LEN (6 * 1024 * 1024) /* for malloc */ -#else -#define CONFIG_SYS_MALLOC_LEN (512 * 1024) -#endif - -/* - * Serial Port - */ -#define CONFIG_CONS_INDEX 1 - -/* - * Serial console configuration - */ -#define CONFIG_PSC_CONSOLE 6 /* console is on PSC6 */ -#if CONFIG_PSC_CONSOLE != 6 -#error CONFIG_PSC_CONSOLE must be 6 -#endif - -#define CONSOLE_FIFO_TX_SIZE FIFOC_PSC6_TX_SIZE -#define CONSOLE_FIFO_TX_ADDR FIFOC_PSC6_TX_ADDR -#define CONSOLE_FIFO_RX_SIZE FIFOC_PSC6_RX_SIZE -#define CONSOLE_FIFO_RX_ADDR FIFOC_PSC6_RX_ADDR - -/* - * Clocks in use - */ -#define SCCR1_CLOCKS_EN (CLOCK_SCCR1_CFG_EN | \ - CLOCK_SCCR1_LPC_EN | \ - CLOCK_SCCR1_NFC_EN | \ - CLOCK_SCCR1_PSC_EN(CONFIG_PSC_CONSOLE) | \ - CLOCK_SCCR1_PSCFIFO_EN | \ - CLOCK_SCCR1_DDR_EN | \ - CLOCK_SCCR1_FEC_EN | \ - CLOCK_SCCR1_TPR_EN) - -#define SCCR2_CLOCKS_EN (CLOCK_SCCR2_MEM_EN | \ - CLOCK_SCCR2_SPDIF_EN | \ - CLOCK_SCCR2_DIU_EN | \ - CLOCK_SCCR2_I2C_EN) - -/* - * Used PSC UART devices - */ -#define CONFIG_SYS_PSC1 -#define CONFIG_SYS_PSC4 -#define CONFIG_SYS_PSC6 - -/* - * Co-processor communication parameters - */ -#define CONFIG_SYS_PDM360NG_COPROC_READ_DELAY 5000 -#define CONFIG_SYS_PDM360NG_COPROC_BAUDRATE 38400 - -/* - * IIM - IC Identification Module - */ -#undef CONFIG_FSL_IIM - -/* - * Enabled only to delete "ethaddr" before testing - * "ethaddr" setting from EEPROM - */ -#define CONFIG_ENV_OVERWRITE - -/* - * Ethernet configuration - */ -#define CONFIG_MPC512x_FEC 1 -#define CONFIG_PHY_ADDR 0x1F -#define CONFIG_MII 1 /* MII PHY management */ -#define CONFIG_FEC_AN_TIMEOUT 1 -#define CONFIG_HAS_ETH0 - -/* - * Environment - */ -#define CONFIG_ENV_IS_IN_FLASH 1 -/* This has to be a multiple of the Flash sector size */ -#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + \ - CONFIG_SYS_MONITOR_LEN) -#define CONFIG_ENV_SIZE 0x2000 -#define CONFIG_ENV_SECT_SIZE 0x40000 /* one sector (256K) for env */ - -/* Address and size of Redundant Environment Sector */ -#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) - -#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ -#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ - -#define CONFIG_CMD_REGINFO - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ - -#ifdef CONFIG_CMD_KGDB - #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else - #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif - -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) -/* Max number of command args */ -#define CONFIG_SYS_MAXARGS 16 -/* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -/* Decrementer freq: 1ms ticks */ - -/* - * For booting Linux, the board info and command line data - * have to be in the first 256 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -/* Initial Memory map for Linux */ -#define CONFIG_SYS_BOOTMAPSZ (256 << 20) - -/* Cache Configuration */ -#define CONFIG_SYS_DCACHE_SIZE 32768 -#define CONFIG_SYS_CACHELINE_SIZE 32 -#ifdef CONFIG_CMD_KGDB -/* log base 2 of the above value */ -#define CONFIG_SYS_CACHELINE_SHIFT 5 -#endif - -#define CONFIG_SYS_HID0_INIT 0x000000000 -#define CONFIG_SYS_HID0_FINAL (HID0_ENABLE_MACHINE_CHECK | HID0_ICE) -#define CONFIG_SYS_HID2 HID2_HBE - -#define CONFIG_HIGH_BATS 1 /* High BATs supported */ - -#ifdef CONFIG_CMD_KGDB -#define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */ -#endif - -/* POST support */ -#define CONFIG_POST (CONFIG_SYS_POST_COPROC) - -/* - * Environment Configuration - */ -#define CONFIG_TIMESTAMP - -#define CONFIG_HOSTNAME pdm360ng -/* default location for tftp and bootm */ -#define CONFIG_LOADADDR 400000 - - -#define CONFIG_PREBOOT "echo;" \ - "echo PDM360NG SAMPLE;" \ - "echo" - -#define CONFIG_BOOTCOMMAND "run env_cont" - -#define CONFIG_OF_SUPPORT_OLD_DEVICE_TREES 1 - -#define OF_CPU "PowerPC,5121@0" -#define OF_SOC_COMPAT "fsl,mpc5121-immr" -#define OF_TBCLK (bd->bi_busfreq / 4) -#define OF_STDOUT_PATH "/soc@80000000/serial@11600" - -/* - * Include common options for all mpc5121 boards - */ -#include "mpc5121-common.h" - -#endif /* __CONFIG_H */ diff --git a/include/configs/v38b.h b/include/configs/v38b.h deleted file mode 100644 index c103215001..0000000000 --- a/include/configs/v38b.h +++ /dev/null @@ -1,282 +0,0 @@ -/* - * (C) Copyright 2003-2006 Wolfgang Denk, DENX Software Engineering, - * wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ -#define CONFIG_MPC5200 1 /* This is an MPC5200 CPU */ -#define CONFIG_V38B 1 /* ...on V38B board */ - -#define CONFIG_SYS_TEXT_BASE 0xFF000000 - -#define CONFIG_SYS_MPC5XXX_CLKIN 33000000 /* ...running at 33.000000MHz */ - -#define CONFIG_RTC_PCF8563 1 /* has PCF8563 RTC */ -#define CONFIG_MPC5200_DDR 1 /* has DDR SDRAM */ - -#undef CONFIG_HW_WATCHDOG /* don't use watchdog */ - -#define CONFIG_NETCONSOLE 1 - -#define CONFIG_BOARD_EARLY_INIT_R 1 /* do board-specific init */ -#define CONFIG_MISC_INIT_R - -#define CONFIG_SYS_XLB_PIPELINING 1 /* gives better performance */ - -#define CONFIG_HIGH_BATS 1 /* High BATs supported */ - -/* - * Serial console configuration - */ -#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } - -/* - * DDR - */ -#define SDRAM_DDR 1 /* is DDR */ -/* Settings for XLB = 132 MHz */ -#define SDRAM_MODE 0x018D0000 -#define SDRAM_EMODE 0x40090000 -#define SDRAM_CONTROL 0x704f0f00 -#define SDRAM_CONFIG1 0x73722930 -#define SDRAM_CONFIG2 0x47770000 -#define SDRAM_TAPDELAY 0x10000000 - -/* - * PCI - no support - */ - -/* - * USB - */ -#define CONFIG_USB_OHCI -#define CONFIG_USB_CLOCK 0x0001BBBB -#define CONFIG_USB_CONFIG 0x00001000 - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - -/* - * Command line configuration. - */ -#define CONFIG_CMD_SDRAM - -#define CONFIG_TIMESTAMP /* Print image info with timestamp */ - -/* - * Boot low with 16 MB Flash - */ -#define CONFIG_SYS_LOWBOOT 1 -#define CONFIG_SYS_LOWBOOT16 1 - -/* - * Autobooting - */ - -#define CONFIG_PREBOOT "echo;" \ - "echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \ - "echo" - -#undef CONFIG_BOOTARGS - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "bootcmd=run net_nfs\0" \ - "bootdelay=3\0" \ - "baudrate=115200\0" \ - "preboot=echo;echo Type \"run flash_nfs\" to mount root " \ - "filesystem over NFS; echo\0" \ - "netdev=eth0\0" \ - "ramargs=setenv bootargs root=/dev/ram rw wdt=off \0" \ - "addip=setenv bootargs $(bootargs) " \ - "ip=$(ipaddr):$(serverip):$(gatewayip):" \ - "$(netmask):$(hostname):$(netdev):off panic=1\0" \ - "flash_nfs=run nfsargs addip;bootm $(kernel_addr)\0" \ - "flash_self=run ramargs addip;bootm $(kernel_addr) " \ - "$(ramdisk_addr)\0" \ - "net_nfs=tftp 200000 $(bootfile);run nfsargs addip;bootm\0" \ - "nfsargs=setenv bootargs root=/dev/nfs rw " \ - "nfsroot=$(serverip):$(rootpath) wdt=off\0" \ - "hostname=v38b\0" \ - "ethact=FEC\0" \ - "rootpath=/opt/eldk-3.1.1/ppc_6xx\0" \ - "update=prot off ff000000 ff03ffff; era ff000000 ff03ffff; " \ - "cp.b 200000 ff000000 $(filesize);" \ - "prot on ff000000 ff03ffff\0" \ - "load=tftp 200000 $(u-boot)\0" \ - "netmask=255.255.0.0\0" \ - "ipaddr=192.168.160.18\0" \ - "serverip=192.168.1.1\0" \ - "bootfile=/tftpboot/v38b/uImage\0" \ - "u-boot=/tftpboot/v38b/u-boot.bin\0" \ - "" - -#define CONFIG_BOOTCOMMAND "run net_nfs" - -/* - * IPB Bus clocking configuration. - */ -#undef CONFIG_SYS_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */ - -/* - * Flash configuration - use CFI driver - */ -#define CONFIG_SYS_FLASH_CFI 1 /* Flash is CFI conformant */ -#define CONFIG_FLASH_CFI_DRIVER 1 /* Use the common driver */ -#define CONFIG_SYS_FLASH_CFI_AMD_RESET 1 -#define CONFIG_SYS_FLASH_BASE 0xFF000000 -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of flash banks */ -#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE } -#define CONFIG_SYS_FLASH_SIZE 0x01000000 /* 16 MiB */ -#define CONFIG_SYS_MAX_FLASH_SECT 256 /* max num of sects on one chip */ -#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* flash write speed-up */ - -/* - * Environment settings - */ -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x00040000) -#define CONFIG_ENV_SIZE 0x10000 -#define CONFIG_ENV_SECT_SIZE 0x10000 -#define CONFIG_ENV_OVERWRITE 1 - -/* - * Memory map - */ -#define CONFIG_SYS_MBAR 0xF0000000 -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_DEFAULT_MBAR 0x80000000 - -/* Use SRAM until RAM will be available */ -#define CONFIG_SYS_INIT_RAM_ADDR MPC5XXX_SRAM -#define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_SIZE /* Size of used area in DPRAM */ - -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE -#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) -# define CONFIG_SYS_RAMBOOT 1 -#endif - -#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256kB for Monitor */ -#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128kB for malloc() */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Linux initial memory map */ - -/* - * Ethernet configuration - */ -#define CONFIG_MPC5xxx_FEC 1 -#define CONFIG_MPC5xxx_FEC_MII100 -#define CONFIG_PHY_ADDR 0x00 -#define CONFIG_MII 1 - -/* - * GPIO configuration - */ -#define CONFIG_SYS_GPS_PORT_CONFIG 0x90001404 - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ - -#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ -#if defined(CONFIG_CMD_KGDB) -# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - -/* - * Various low-level settings - */ -#define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI -#define CONFIG_SYS_HID0_FINAL HID0_ICE - -#define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE -#define CONFIG_SYS_BOOTCS_CFG 0x00047801 -#define CONFIG_SYS_CS0_START CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_CS0_SIZE CONFIG_SYS_FLASH_SIZE - -#define CONFIG_SYS_CS_BURST 0x00000000 -#define CONFIG_SYS_CS_DEADCYCLE 0x33333333 - -#define CONFIG_SYS_RESET_ADDRESS 0xff000000 - -/* - * IDE/ATA (supports IDE harddisk) - */ -#undef CONFIG_IDE_LED /* LED for ide not supported */ - -#define CONFIG_IDE_RESET /* reset for ide supported */ -#define CONFIG_IDE_PREINIT - -#define CONFIG_SYS_IDE_MAXBUS 1 /* max. 1 IDE bus */ -#define CONFIG_SYS_IDE_MAXDEVICE 1 /* max. 1 drive per IDE bus */ - -#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000 - -#define CONFIG_SYS_ATA_BASE_ADDR MPC5XXX_ATA - -#define CONFIG_SYS_ATA_DATA_OFFSET (0x0060) /* data I/O offset */ - -#define CONFIG_SYS_ATA_REG_OFFSET (CONFIG_SYS_ATA_DATA_OFFSET) /* normal register accesses offset */ - -#define CONFIG_SYS_ATA_ALT_OFFSET (0x005C) /* alternate registers offset */ - -#define CONFIG_SYS_ATA_STRIDE 4 /* Interval between registers */ - -/* - * Status LED - */ - -#define CONFIG_SYS_LED_BASE MPC5XXX_GPT7_ENABLE /* Timer 7 GPIO */ -#ifndef __ASSEMBLY__ -typedef unsigned int led_id_t; - -#define __led_toggle(_msk) \ - do { \ - *((volatile long *) (CONFIG_SYS_LED_BASE)) ^= (_msk); \ - } while(0) - -#define __led_set(_msk, _st) \ - do { \ - if ((_st)) \ - *((volatile long *) (CONFIG_SYS_LED_BASE)) &= ~(_msk); \ - else \ - *((volatile long *) (CONFIG_SYS_LED_BASE)) |= (_msk); \ - } while(0) - -#define __led_init(_msk, st) \ - do { \ - *((volatile long *) (CONFIG_SYS_LED_BASE)) |= 0x34; \ - } while(0) -#endif /* __ASSEMBLY__ */ - -#endif /* __CONFIG_H */ |