diff options
Diffstat (limited to 'include/configs')
| -rw-r--r-- | include/configs/at91-sama5_common.h | 37 | ||||
| -rw-r--r-- | include/configs/at91sam9m10g45ek.h | 1 | ||||
| -rw-r--r-- | include/configs/at91sam9n12ek.h | 2 | ||||
| -rw-r--r-- | include/configs/at91sam9x5ek.h | 2 | ||||
| -rw-r--r-- | include/configs/corvus.h | 2 | ||||
| -rw-r--r-- | include/configs/picosam9g45.h | 211 | ||||
| -rw-r--r-- | include/configs/sama5d3_xplained.h | 19 | ||||
| -rw-r--r-- | include/configs/sama5d3xek.h | 33 | ||||
| -rw-r--r-- | include/configs/sama5d4_xplained.h | 41 | ||||
| -rw-r--r-- | include/configs/sama5d4ek.h | 39 |
10 files changed, 265 insertions, 122 deletions
diff --git a/include/configs/at91-sama5_common.h b/include/configs/at91-sama5_common.h index 2bded45548..de5f12ebb0 100644 --- a/include/configs/at91-sama5_common.h +++ b/include/configs/at91-sama5_common.h @@ -27,6 +27,7 @@ #define CONFIG_BOARD_EARLY_INIT_F #define CONFIG_DISPLAY_CPUINFO +#define CONFIG_ENV_VARS_UBOOT_CONFIG #define CONFIG_CMD_BOOTZ #define CONFIG_OF_LIBFDT /* Device Tree support */ @@ -52,6 +53,20 @@ #define CONFIG_CMD_DHCP #ifdef CONFIG_SYS_USE_MMC +/* u-boot env in sd/mmc card */ +#define CONFIG_ENV_IS_IN_FAT +#define CONFIG_FAT_WRITE +#define FAT_ENV_INTERFACE "mmc" +#define FAT_ENV_DEVICE_AND_PART "0" +#define FAT_ENV_FILE "uboot.env" +#define CONFIG_ENV_SIZE 0x4000 + +#define CONFIG_BOOTCOMMAND "if test ! -n ${dtb_name}; then " \ + "setenv dtb_name at91-${board_name}.dtb; " \ + "fi; " \ + "fatload mmc 0:1 0x21000000 ${dtb_name}; " \ + "fatload mmc 0:1 0x22000000 zImage; " \ + "bootz 0x22000000 - 0x21000000" #define CONFIG_BOOTARGS \ "console=ttyS0,115200 earlyprintk " \ "root=/dev/mmcblk0p2 rw rootwait" @@ -62,6 +77,28 @@ "256K(env),256k(env_redundent),256k(spare)," \ "512k(dtb),6M(kernel)ro,-(rootfs) " \ "rootfstype=ubifs ubi.mtd=7 root=ubi0:rootfs" + +#ifdef CONFIG_SYS_USE_NANDFLASH +/* u-boot env in nand flash */ +#define CONFIG_ENV_IS_IN_NAND +#define CONFIG_ENV_OFFSET 0xc0000 +#define CONFIG_ENV_OFFSET_REDUND 0x100000 +#define CONFIG_ENV_SIZE 0x20000 +#define CONFIG_BOOTCOMMAND "nand read 0x21000000 0x180000 0x80000;" \ + "nand read 0x22000000 0x200000 0x600000;" \ + "bootz 0x22000000 - 0x21000000" +#elif CONFIG_SYS_USE_SERIALFLASH +/* u-boot env in serial flash, by default is bus 0 and cs 0 */ +#define CONFIG_ENV_IS_IN_SPI_FLASH +#define CONFIG_ENV_OFFSET 0x4000 +#define CONFIG_ENV_SIZE 0x4000 +#define CONFIG_ENV_SECT_SIZE 0x1000 +#define CONFIG_BOOTCOMMAND "sf probe 0; " \ + "sf read 0x21000000 0x60000 0xc000; " \ + "sf read 0x22000000 0x6c000 0x394000; " \ + "bootz 0x22000000 - 0x21000000" +#endif + #endif #define CONFIG_BAUDRATE 115200 diff --git a/include/configs/at91sam9m10g45ek.h b/include/configs/at91sam9m10g45ek.h index 4d9020975e..2f6a3a57b4 100644 --- a/include/configs/at91sam9m10g45ek.h +++ b/include/configs/at91sam9m10g45ek.h @@ -251,5 +251,4 @@ #define CONFIG_SYS_MCKR 0x1301 #define CONFIG_SYS_MCKR_CSS 0x1302 -#define ATMEL_BASE_MPDDRC ATMEL_BASE_DDRSDRC0 #endif diff --git a/include/configs/at91sam9n12ek.h b/include/configs/at91sam9n12ek.h index ea0a94bcde..acdd63e758 100644 --- a/include/configs/at91sam9n12ek.h +++ b/include/configs/at91sam9n12ek.h @@ -259,8 +259,6 @@ #define CONFIG_SYS_MCKR 0x1301 #define CONFIG_SYS_MCKR_CSS 0x1302 -#define ATMEL_BASE_MPDDRC ATMEL_BASE_DDRSDRC - #ifdef CONFIG_SYS_USE_MMC #define CONFIG_SPL_LDSCRIPT arch/arm/mach-at91/arm926ejs/u-boot-spl.lds #define CONFIG_SPL_MMC_SUPPORT diff --git a/include/configs/at91sam9x5ek.h b/include/configs/at91sam9x5ek.h index 9f76786202..fbb584d9bf 100644 --- a/include/configs/at91sam9x5ek.h +++ b/include/configs/at91sam9x5ek.h @@ -261,8 +261,6 @@ #define CONFIG_SYS_MCKR 0x1301 #define CONFIG_SYS_MCKR_CSS 0x1302 -#define ATMEL_BASE_MPDDRC ATMEL_BASE_DDRSDRC - #ifdef CONFIG_SYS_USE_MMC #define CONFIG_SPL_LDSCRIPT arch/arm/mach-at91/arm926ejs/u-boot-spl.lds #define CONFIG_SPL_MMC_SUPPORT diff --git a/include/configs/corvus.h b/include/configs/corvus.h index 2d2f3c11aa..c91e289da8 100644 --- a/include/configs/corvus.h +++ b/include/configs/corvus.h @@ -193,6 +193,4 @@ #define CONFIG_SYS_MCKR 0x1301 #define CONFIG_SYS_MCKR_CSS 0x1302 -#define ATMEL_BASE_MPDDRC ATMEL_BASE_DDRSDRC0 - #endif diff --git a/include/configs/picosam9g45.h b/include/configs/picosam9g45.h new file mode 100644 index 0000000000..e3039c2a5d --- /dev/null +++ b/include/configs/picosam9g45.h @@ -0,0 +1,211 @@ +/* + * Configuration settings for the mini-box PICOSAM9G45 board. + * (C) Copyright 2015 Inter Act B.V. + * + * Based on: + * U-Boot file: include/configs/at91sam9m10g45ek.h + * (C) Copyright 2007-2008 + * Stelian Pop <stelian@popies.net> + * Lead Tech Design <www.leadtechdesign.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#include <asm/hardware.h> + +#define CONFIG_SYS_TEXT_BASE 0x23f00000 + +#define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */ + +/* ARM asynchronous clock */ +#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 +#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */ + +#define CONFIG_PICOSAM + +#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_INITRD_TAG +#define CONFIG_SKIP_LOWLEVEL_INIT +#define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_DISPLAY_CPUINFO + +#define CONFIG_CMD_BOOTZ +#define CONFIG_OF_LIBFDT + +#define CONFIG_SYS_GENERIC_BOARD + +/* general purpose I/O */ +#define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */ +#define CONFIG_AT91_GPIO +#define CONFIG_AT91_GPIO_PULLUP 1 /* keep pullups on peripheral pins */ + +/* serial console */ +#define CONFIG_ATMEL_USART +#define CONFIG_USART_BASE ATMEL_BASE_DBGU +#define CONFIG_USART_ID ATMEL_ID_SYS + +/* LCD */ +#define CONFIG_LCD +#define LCD_BPP LCD_COLOR8 +#define CONFIG_LCD_LOGO +#undef LCD_TEST_PATTERN +#define CONFIG_LCD_INFO +#define CONFIG_LCD_INFO_BELOW_LOGO +#define CONFIG_SYS_WHITE_ON_BLACK +#define CONFIG_ATMEL_LCD +#define CONFIG_ATMEL_LCD_RGB565 +#define CONFIG_SYS_CONSOLE_IS_IN_ENV +/* board specific(not enough SRAM) */ +#define CONFIG_AT91SAM9G45_LCD_BASE 0x23E00000 + +/* LED */ +#define CONFIG_AT91_LED +#define CONFIG_GREEN_LED AT91_PIN_PD31 /* this is the user1 led */ + +#define CONFIG_BOOTDELAY 3 + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + +/* Enable the watchdog */ +#define CONFIG_AT91SAM9_WATCHDOG +#define CONFIG_HW_WATCHDOG + +/* + * Command line configuration. + */ + +/* No NOR flash */ +#define CONFIG_SYS_NO_FLASH +#define CONFIG_CMD_PING +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_USB + +/* SDRAM */ +#define CONFIG_NR_DRAM_BANKS 2 +#define PHYS_SDRAM_1 ATMEL_BASE_CS1 /* on DDRSDRC1 */ +#define PHYS_SDRAM_1_SIZE 0x08000000 /* 128 MB */ +#define PHYS_SDRAM_2 ATMEL_BASE_CS6 /* on DDRSDRC0 */ +#define PHYS_SDRAM_2_SIZE 0x08000000 /* 128 MB */ +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 + +#define CONFIG_SYS_INIT_SP_ADDR \ + (CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE) + +/* MMC */ +#define CONFIG_CMD_MMC + +#ifdef CONFIG_CMD_MMC +#define CONFIG_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_GENERIC_ATMEL_MCI +#endif + +#if defined(CONFIG_CMD_USB) || defined(CONFIG_CMD_MMC) +#define CONFIG_CMD_FAT +#define CONFIG_DOS_PARTITION +#endif + +/* Ethernet */ +#define CONFIG_MACB +#define CONFIG_RMII +#define CONFIG_NET_RETRY_COUNT 20 +#define CONFIG_RESET_PHY_R +#define CONFIG_AT91_WANTS_COMMON_PHY + +/* USB */ +#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_ATMEL +#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 2 +#define CONFIG_USB_STORAGE + +#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ + +#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE +#define CONFIG_SYS_MEMTEST_END 0x23e00000 + +#ifdef CONFIG_SYS_USE_MMC +/* bootstrap + u-boot + env + linux in mmc */ +#define FAT_ENV_INTERFACE "mmc" +/* + * We don't specify the part number, if device 0 has partition table, it means + * the first partition; it no partition table, then take whole device as a + * FAT file system. + */ +#define FAT_ENV_DEVICE_AND_PART "0" +#define FAT_ENV_FILE "uboot.env" +#define CONFIG_ENV_IS_IN_FAT +#define CONFIG_FAT_WRITE +#define CONFIG_ENV_SIZE 0x4000 + +#define CONFIG_BOOTARGS "console=ttyS0,115200 " \ + "root=/dev/mmcblk0p2 rw rootwait" +#define CONFIG_BOOTCOMMAND "fatload mmc 0:1 0x21000000 dtb; " \ + "fatload mmc 0:1 0x22000000 zImage; " \ + "bootz 0x22000000 - 0x21000000" +#endif + +#define CONFIG_BAUDRATE 115200 + +#define CONFIG_SYS_PROMPT "U-Boot> " +#define CONFIG_SYS_CBSIZE 256 +#define CONFIG_SYS_MAXARGS 16 +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \ + + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_LONGHELP +#define CONFIG_CMDLINE_EDITING +#define CONFIG_AUTO_COMPLETE +#define CONFIG_SYS_HUSH_PARSER + +/* + * Size of malloc() pool + */ +#define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000) + +/* Defines for SPL */ +#define CONFIG_SPL_FRAMEWORK +#define CONFIG_SPL_TEXT_BASE 0x300000 +#define CONFIG_SPL_MAX_SIZE 0x010000 +#define CONFIG_SPL_STACK 0x310000 + +#define CONFIG_SPL_LIBCOMMON_SUPPORT +#define CONFIG_SPL_LIBGENERIC_SUPPORT +#define CONFIG_SPL_SERIAL_SUPPORT +#define CONFIG_SPL_GPIO_SUPPORT +#define CONFIG_SPL_WATCHDOG_SUPPORT + +#define CONFIG_SYS_MONITOR_LEN 0x80000 + +#ifdef CONFIG_SYS_USE_MMC + +#define CONFIG_SPL_BSS_START_ADDR 0x20000000 +#define CONFIG_SPL_BSS_MAX_SIZE 0x00080000 +#define CONFIG_SYS_SPL_MALLOC_START 0x20080000 +#define CONFIG_SYS_SPL_MALLOC_SIZE 0x00080000 + +#define CONFIG_SPL_LDSCRIPT arch/arm/mach-at91/arm926ejs/u-boot-spl.lds +#define CONFIG_SPL_MMC_SUPPORT +#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x400 +#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x200 +#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 +#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" +#define CONFIG_SPL_FAT_SUPPORT +#define CONFIG_SPL_LIBDISK_SUPPORT + +#define CONFIG_SPL_ATMEL_SIZE +#define CONFIG_SYS_MASTER_CLOCK 132096000 +#define CONFIG_SYS_AT91_PLLA 0x20c73f03 +#define CONFIG_SYS_MCKR 0x1301 +#define CONFIG_SYS_MCKR_CSS 0x1302 + +#endif +#endif diff --git a/include/configs/sama5d3_xplained.h b/include/configs/sama5d3_xplained.h index c4141a019d..73de62cddd 100644 --- a/include/configs/sama5d3_xplained.h +++ b/include/configs/sama5d3_xplained.h @@ -115,24 +115,9 @@ #define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ #if CONFIG_SYS_USE_NANDFLASH -/* bootstrap + u-boot + env in nandflash */ -#define CONFIG_ENV_IS_IN_NAND -#define CONFIG_ENV_OFFSET 0xc0000 -#define CONFIG_ENV_OFFSET_REDUND 0x100000 -#define CONFIG_ENV_SIZE 0x20000 -#define CONFIG_BOOTCOMMAND "nand read 0x21000000 0x180000 0x80000;" \ - "nand read 0x22000000 0x200000 0x600000;" \ - "bootz 0x22000000 - 0x21000000" +/* override the bootcmd, bootargs and other configuration for nandflash env */ #elif CONFIG_SYS_USE_MMC -/* bootstrap + u-boot + env in sd card */ -#define CONFIG_ENV_IS_IN_FAT -#define FAT_ENV_INTERFACE "mmc" -#define FAT_ENV_FILE "uboot.env" -#define FAT_ENV_DEVICE_AND_PART "0" -#define CONFIG_ENV_SIZE 0x4000 -#define CONFIG_BOOTCOMMAND "fatload mmc 0:1 0x21000000 at91-sama5d3_xplained.dtb; " \ - "fatload mmc 0:1 0x22000000 zImage; " \ - "bootz 0x22000000 - 0x21000000" +/* override the bootcmd, bootargs and other configuration for sd/mmc env */ #else #define CONFIG_ENV_IS_NOWHERE #endif diff --git a/include/configs/sama5d3xek.h b/include/configs/sama5d3xek.h index 9497bea946..61b4bdaab2 100644 --- a/include/configs/sama5d3xek.h +++ b/include/configs/sama5d3xek.h @@ -19,6 +19,9 @@ */ #include "at91-sama5_common.h" +#define CONFIG_BOARD_LATE_INIT +#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG + /* serial console */ #define CONFIG_ATMEL_USART #define CONFIG_USART_BASE ATMEL_BASE_DBGU @@ -153,33 +156,11 @@ #define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ #ifdef CONFIG_SYS_USE_SERIALFLASH -/* bootstrap + u-boot + env + linux in serial flash */ -#define CONFIG_ENV_IS_IN_SPI_FLASH -#define CONFIG_ENV_OFFSET 0x5000 -#define CONFIG_ENV_SIZE 0x3000 -#define CONFIG_ENV_SECT_SIZE 0x1000 -#define CONFIG_BOOTCOMMAND "sf probe 0; " \ - "sf read 0x22000000 0x42000 0x300000; " \ - "bootm 0x22000000" +/* override the bootcmd, bootargs and other configuration for spi flash env*/ #elif CONFIG_SYS_USE_NANDFLASH -/* bootstrap + u-boot + env in nandflash */ -#define CONFIG_ENV_IS_IN_NAND -#define CONFIG_ENV_OFFSET 0xc0000 -#define CONFIG_ENV_OFFSET_REDUND 0x100000 -#define CONFIG_ENV_SIZE 0x20000 -#define CONFIG_BOOTCOMMAND "nand read 0x21000000 0x180000 0x80000;" \ - "nand read 0x22000000 0x200000 0x600000;" \ - "bootm 0x22000000 - 0x21000000" +/* override the bootcmd, bootargs and other configuration nandflash env */ #elif CONFIG_SYS_USE_MMC -/* bootstrap + u-boot + env in sd card */ -#define CONFIG_ENV_IS_IN_FAT -#define FAT_ENV_INTERFACE "mmc" -#define FAT_ENV_FILE "uboot.env" -#define FAT_ENV_DEVICE_AND_PART "0" -#define CONFIG_ENV_SIZE 0x4000 -#define CONFIG_BOOTCOMMAND "fatload mmc 0:1 0x21000000 dtb; " \ - "fatload mmc 0:1 0x22000000 uImage; " \ - "bootm 0x22000000 - 0x21000000" +/* override the bootcmd, bootargs and other configuration for sd/mmc env */ #else #define CONFIG_ENV_IS_NOWHERE #endif @@ -228,7 +209,7 @@ #define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_SPI_FLASH_SUPPORT #define CONFIG_SPL_SPI_LOAD -#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x8400 +#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x8000 #endif diff --git a/include/configs/sama5d4_xplained.h b/include/configs/sama5d4_xplained.h index e06dfc9a90..139031d307 100644 --- a/include/configs/sama5d4_xplained.h +++ b/include/configs/sama5d4_xplained.h @@ -117,46 +117,13 @@ #endif #ifdef CONFIG_SYS_USE_SERIALFLASH -/* bootstrap + u-boot + env + linux in serial flash */ -#define CONFIG_ENV_IS_IN_SPI_FLASH -#define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS -#define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS -#define CONFIG_ENV_OFFSET 0x10000 -#define CONFIG_ENV_SIZE 0x10000 -#define CONFIG_ENV_SECT_SIZE 0x1000 -#define CONFIG_BOOTCOMMAND "sf probe 0; " \ - "sf read 0x21000000 0xa0000 0x60000; " \ - "sf read 0x22000000 0x100000 0x300000; " \ - "bootz 0x22000000 - 0x21000000" +/* override the bootcmd, bootargs and other configuration for spi flash env */ #elif CONFIG_SYS_USE_NANDFLASH -/* bootstrap + u-boot + env in nandflash */ -#define CONFIG_ENV_IS_IN_NAND -#define CONFIG_ENV_OFFSET 0xc0000 -#define CONFIG_ENV_OFFSET_REDUND 0x100000 -#define CONFIG_ENV_SIZE 0x20000 -#define CONFIG_BOOTCOMMAND "nand read 0x21000000 0x180000 0x80000;" \ - "nand read 0x22000000 0x200000 0x600000;" \ - "bootz 0x22000000 - 0x21000000" +/* override the bootcmd, bootargs and other configuration for nandflash env */ #elif CONFIG_SYS_USE_MMC -/* bootstrap + u-boot + env in sd card */ -#define CONFIG_ENV_IS_IN_FAT -#define CONFIG_FAT_WRITE -#define FAT_ENV_INTERFACE "mmc" -/* - * We don't specify the part number, if device 0 has partition table, it means - * the first partition; it no partition table, then take whole device as a - * FAT file system. - */ -#define FAT_ENV_DEVICE_AND_PART "0" -#define FAT_ENV_FILE "uboot.env" -#define CONFIG_ENV_SIZE 0x4000 -#define CONFIG_BOOTCOMMAND "fatload mmc 0:1 0x21000000 at91-sama5d4_xplained.dtb; " \ - "fatload mmc 0:1 0x22000000 zImage; " \ - "bootz 0x22000000 - 0x21000000" +/* override the bootcmd, bootargs and other configuration for sd/mmc env */ #endif - - /* SPL */ #define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_TEXT_BASE 0x200000 @@ -203,7 +170,7 @@ #define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_SPI_FLASH_SUPPORT #define CONFIG_SPL_SPI_LOAD -#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000 +#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x8000 #endif #endif diff --git a/include/configs/sama5d4ek.h b/include/configs/sama5d4ek.h index eadccc182a..cde549a214 100644 --- a/include/configs/sama5d4ek.h +++ b/include/configs/sama5d4ek.h @@ -115,42 +115,11 @@ #define CONFIG_SYS_CONSOLE_IS_IN_ENV #ifdef CONFIG_SYS_USE_SERIALFLASH -/* bootstrap + u-boot + env + linux in serial flash */ -#define CONFIG_ENV_IS_IN_SPI_FLASH -#define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS -#define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS -#define CONFIG_ENV_OFFSET 0x10000 -#define CONFIG_ENV_SIZE 0x10000 -#define CONFIG_ENV_SECT_SIZE 0x1000 -#define CONFIG_BOOTCOMMAND "sf probe 0; " \ - "sf read 0x21000000 0xa0000 0x60000; " \ - "sf read 0x22000000 0x100000 0x300000; " \ - "bootz 0x22000000 - 0x21000000" +/* override the bootcmd, bootargs and other configuration for spi flash env*/ #elif CONFIG_SYS_USE_NANDFLASH -/* bootstrap + u-boot + env in nandflash */ -#define CONFIG_ENV_IS_IN_NAND -#define CONFIG_ENV_OFFSET 0xc0000 -#define CONFIG_ENV_OFFSET_REDUND 0x100000 -#define CONFIG_ENV_SIZE 0x20000 -#define CONFIG_BOOTCOMMAND "nand read 0x21000000 0x180000 0x80000;" \ - "nand read 0x22000000 0x200000 0x600000;" \ - "bootz 0x22000000 - 0x21000000" +/* override the bootcmd, bootargs and other configuration for nandflash env*/ #elif CONFIG_SYS_USE_MMC -/* bootstrap + u-boot + env in sd card */ -#define CONFIG_ENV_IS_IN_FAT -#define CONFIG_FAT_WRITE -#define FAT_ENV_INTERFACE "mmc" -/* - * We don't specify the part number, if device 0 has partition table, it means - * the first partition; it no partition table, then take whole device as a - * FAT file system. - */ -#define FAT_ENV_DEVICE_AND_PART "0" -#define FAT_ENV_FILE "uboot.env" -#define CONFIG_ENV_SIZE 0x4000 -#define CONFIG_BOOTCOMMAND "fatload mmc 0:1 0x21000000 sama5d4ek.dtb; " \ - "fatload mmc 0:1 0x22000000 zImage; " \ - "bootz 0x22000000 - 0x21000000" +/* override the bootcmd, bootargs and other configuration for sd/mmc env */ #endif /* SPL */ @@ -199,7 +168,7 @@ #define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_SPI_FLASH_SUPPORT #define CONFIG_SPL_SPI_LOAD -#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000 +#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x8000 #endif #endif |