diff options
Diffstat (limited to 'include/configs')
86 files changed, 33 insertions, 213 deletions
diff --git a/include/configs/B4860QDS.h b/include/configs/B4860QDS.h index 953d06b53c..9063c57b40 100644 --- a/include/configs/B4860QDS.h +++ b/include/configs/B4860QDS.h @@ -227,6 +227,7 @@ unsigned long get_board_ddr_clk(void); #endif /* EEPROM */ +#define CONFIG_ID_EEPROM #define CONFIG_SYS_I2C_EEPROM_NXID #define CONFIG_SYS_EEPROM_BUS_NUM 0 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 @@ -819,9 +820,16 @@ unsigned long get_board_ddr_clk(void); #define __USB_PHY_TYPE ulpi +#ifdef CONFIG_PPC_B4860 +#define HWCONFIG "hwconfig=fsl_ddr:ctlr_intlv=null," \ + "bank_intlv=cs0_cs1;" \ + "en_cpc:cpc2;" +#else +#define HWCONFIG "hwconfig=fsl_ddr:ctlr_intlv=null,bank_intlv=cs0_cs1;" +#endif + #define CONFIG_EXTRA_ENV_SETTINGS \ - "hwconfig=fsl_ddr:ctlr_intlv=null," \ - "bank_intlv=cs0_cs1;" \ + HWCONFIG \ "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\ "netdev=eth0\0" \ "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ diff --git a/include/configs/T104xRDB.h b/include/configs/T104xRDB.h index 0ee0ff242d..5e2c100d93 100644 --- a/include/configs/T104xRDB.h +++ b/include/configs/T104xRDB.h @@ -19,6 +19,9 @@ #define CONFIG_SYS_FSL_PBL_RCW $(SRCTREE)/board/freescale/t104xrdb/t1040_rcw.cfg #endif #ifdef CONFIG_T1042RDB_PI +#define CONFIG_SYS_FSL_PBL_RCW $(SRCTREE)/board/freescale/t104xrdb/t1042_pi_rcw.cfg +#endif +#ifdef CONFIG_T1042RDB #define CONFIG_SYS_FSL_PBL_RCW $(SRCTREE)/board/freescale/t104xrdb/t1042_rcw.cfg #endif @@ -477,7 +480,7 @@ /* I2C bus multiplexer */ #define I2C_MUX_PCA_ADDR 0x70 -#ifdef CONFIG_T1040RDB +#if defined(CONFIG_T1040RDB) || defined(CONFIG_T1042RDB) #define I2C_MUX_CH_DEFAULT 0x8 #endif @@ -503,6 +506,7 @@ #define CONFIG_FSL_ESPI #define CONFIG_SPI_FLASH #define CONFIG_SPI_FLASH_STMICRO +#define CONFIG_SPI_FLASH_BAR #define CONFIG_CMD_SF #define CONFIG_SF_DEFAULT_SPEED 10000000 #define CONFIG_SF_DEFAULT_MODE 0 @@ -633,7 +637,7 @@ #define CONFIG_SYS_DPAA_FMAN #define CONFIG_SYS_DPAA_PME -#ifdef CONFIG_T1040RDB +#if defined(CONFIG_T1040RDB) || defined(CONFIG_T1042RDB) #define CONFIG_QE #define CONFIG_U_QE #endif @@ -662,7 +666,7 @@ #define CONFIG_SYS_FMAN_FW_ADDR 0xEFF00000 #endif -#ifdef CONFIG_T1040RDB +#if defined(CONFIG_T1040RDB) || defined(CONFIG_T1042RDB) #if defined(CONFIG_SPIFLASH) #define CONFIG_SYS_QE_FW_ADDR 0x130000 #elif defined(CONFIG_SDCARD) @@ -686,7 +690,7 @@ #endif #ifdef CONFIG_FMAN_ENET -#ifdef CONFIG_T1040RDB +#if defined(CONFIG_T1040RDB) || defined(CONFIG_T1042RDB) #define CONFIG_SYS_SGMII1_PHY_ADDR 0x03 #endif #define CONFIG_SYS_RGMII1_PHY_ADDR 0x01 @@ -788,13 +792,14 @@ #define CONFIG_BAUDRATE 115200 #define __USB_PHY_TYPE utmi +#define RAMDISKFILE "t104xrdb/ramdisk.uboot" #ifdef CONFIG_T1040RDB #define FDTFILE "t1040rdb/t1040rdb.dtb" -#define RAMDISKFILE "t1040rdb/ramdisk.uboot" -#elif CONFIG_T1042RDB_PI -#define FDTFILE "t1040rdb_pi/t1040rdb_pi.dtb" -#define RAMDISKFILE "t1040rdb_pi/ramdisk.uboot" +#elif defined(CONFIG_T1042RDB_PI) +#define FDTFILE "t1042rdb_pi/t1042rdb_pi.dtb" +#elif defined(CONFIG_T1042RDB) +#define FDTFILE "t1042rdb/t1042rdb.dtb" #endif #ifdef CONFIG_FSL_DIU_FB diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h index aef0ad3fbe..e2f7ead9bc 100644 --- a/include/configs/am335x_evm.h +++ b/include/configs/am335x_evm.h @@ -23,9 +23,6 @@ # define CONFIG_TIMESTAMP # define CONFIG_LZO # ifdef CONFIG_ENABLE_VBOOT -# define CONFIG_OF_CONTROL -# define CONFIG_OF_SEPARATE -# define CONFIG_DEFAULT_DEVICE_TREE am335x-boneblack # define CONFIG_FIT_SIGNATURE # define CONFIG_RSA # endif @@ -405,8 +402,6 @@ #define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_SPI_FLASH_SUPPORT #define CONFIG_SPL_SPI_LOAD -#define CONFIG_SPL_SPI_BUS 0 -#define CONFIG_SPL_SPI_CS 0 #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000 #define CONFIG_ENV_IS_IN_SPI_FLASH diff --git a/include/configs/arndale.h b/include/configs/arndale.h index 75f9933778..43077cf851 100644 --- a/include/configs/arndale.h +++ b/include/configs/arndale.h @@ -22,8 +22,6 @@ #define CONFIG_DISPLAY_CPUINFO #define CONFIG_DISPLAY_BOARDINFO -#define CONFIG_OF_CONTROL -#define CONFIG_OF_SEPARATE /* Allow tracing to be enabled */ #define CONFIG_TRACE @@ -226,7 +224,6 @@ #define CONFIG_POWER_I2C #define CONFIG_POWER_MAX77686 -#define CONFIG_DEFAULT_DEVICE_TREE exynos5250-arndale #define CONFIG_PREBOOT diff --git a/include/configs/bct-brettl2.h b/include/configs/bct-brettl2.h index c1eda96385..d0828d5f5c 100644 --- a/include/configs/bct-brettl2.h +++ b/include/configs/bct-brettl2.h @@ -137,7 +137,6 @@ #define CONFIG_MTD_DEVICE #define CONFIG_MTD_PARTITIONS #define CONFIG_SYS_HUSH_PARSER -#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED /* * Pull in common ADI header for remaining command/environment setup diff --git a/include/configs/beaver.h b/include/configs/beaver.h index d8ed717f5a..164b2dd951 100644 --- a/include/configs/beaver.h +++ b/include/configs/beaver.h @@ -24,11 +24,6 @@ /* VDD core PMIC */ #define CONFIG_TEGRA_VDD_CORE_TPS62366A_SET1 -/* Enable fdt support for Beaver. Flash the image in u-boot-dtb.bin */ -#define CONFIG_DEFAULT_DEVICE_TREE tegra30-beaver -#define CONFIG_OF_CONTROL -#define CONFIG_OF_SEPARATE - /* High-level configuration options */ #define V_PROMPT "Tegra30 (Beaver) # " #define CONFIG_TEGRA_BOARD_STRING "NVIDIA Beaver" diff --git a/include/configs/bf506f-ezkit.h b/include/configs/bf506f-ezkit.h index 5db181984f..0b66cdbc01 100644 --- a/include/configs/bf506f-ezkit.h +++ b/include/configs/bf506f-ezkit.h @@ -85,8 +85,6 @@ */ #define CONFIG_ENV_IS_NOWHERE #define CONFIG_ENV_SIZE 0x400 -#undef CONFIG_CMD_EXPORTENV -#undef CONFIG_CMD_IMPORTENV /* @@ -102,7 +100,6 @@ #define CONFIG_CMD_MEMORY #undef CONFIG_GZIP #undef CONFIG_ZLIB -#undef CONFIG_CMD_BOOTM #undef CONFIG_BOOTM_RTEMS #undef CONFIG_BOOTM_LINUX diff --git a/include/configs/bf518f-ezbrd.h b/include/configs/bf518f-ezbrd.h index 9e374c4024..20f6ed1992 100644 --- a/include/configs/bf518f-ezbrd.h +++ b/include/configs/bf518f-ezbrd.h @@ -155,7 +155,6 @@ #define CONFIG_MISC_INIT_R #define CONFIG_RTC_BFIN #define CONFIG_UART_CONSOLE 0 -#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED /* * Pull in common ADI header for remaining command/environment setup diff --git a/include/configs/bf526-ezbrd.h b/include/configs/bf526-ezbrd.h index 972eca9c17..c33d035022 100644 --- a/include/configs/bf526-ezbrd.h +++ b/include/configs/bf526-ezbrd.h @@ -153,7 +153,6 @@ #define CONFIG_MISC_INIT_R #define CONFIG_RTC_BFIN #define CONFIG_UART_CONSOLE 1 -#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED /* define to enable run status via led */ /* #define CONFIG_STATUS_LED */ diff --git a/include/configs/bf527-ad7160-eval.h b/include/configs/bf527-ad7160-eval.h index c0dfe2685b..b497f26773 100644 --- a/include/configs/bf527-ad7160-eval.h +++ b/include/configs/bf527-ad7160-eval.h @@ -136,7 +136,6 @@ */ #define CONFIG_MISC_INIT_R #define CONFIG_UART_CONSOLE 0 -#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED /* * Pull in common ADI header for remaining command/environment setup diff --git a/include/configs/bf527-ezkit.h b/include/configs/bf527-ezkit.h index 92c183e27c..0bca53f2a6 100644 --- a/include/configs/bf527-ezkit.h +++ b/include/configs/bf527-ezkit.h @@ -179,7 +179,6 @@ #define CONFIG_MISC_INIT_R #define CONFIG_RTC_BFIN #define CONFIG_UART_CONSOLE 1 -#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED /* * Pull in common ADI header for remaining command/environment setup diff --git a/include/configs/bf527-sdp.h b/include/configs/bf527-sdp.h index 458868af72..9d43b811e3 100644 --- a/include/configs/bf527-sdp.h +++ b/include/configs/bf527-sdp.h @@ -112,7 +112,6 @@ */ #define CONFIG_MISC_INIT_R #define CONFIG_UART_CONSOLE 0 -#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED /* * Pull in common ADI header for remaining command/environment setup diff --git a/include/configs/bf533-ezkit.h b/include/configs/bf533-ezkit.h index b50352823e..0fda967ac2 100644 --- a/include/configs/bf533-ezkit.h +++ b/include/configs/bf533-ezkit.h @@ -110,7 +110,6 @@ #define CONFIG_MISC_INIT_R #define CONFIG_RTC_BFIN #define CONFIG_UART_CONSOLE 0 -#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED /* * Pull in common ADI header for remaining command/environment setup diff --git a/include/configs/bf533-stamp.h b/include/configs/bf533-stamp.h index 3d36d84c7c..ae4d83a8f1 100644 --- a/include/configs/bf533-stamp.h +++ b/include/configs/bf533-stamp.h @@ -186,7 +186,6 @@ */ #define CONFIG_RTC_BFIN #define CONFIG_UART_CONSOLE 0 -#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED /* FLASH/ETHERNET uses the same async bank */ #define SHARED_RESOURCES 1 diff --git a/include/configs/bf537-stamp.h b/include/configs/bf537-stamp.h index a302f839a1..29f9316067 100644 --- a/include/configs/bf537-stamp.h +++ b/include/configs/bf537-stamp.h @@ -254,7 +254,6 @@ #define CONFIG_MISC_INIT_R #define CONFIG_RTC_BFIN #define CONFIG_UART_CONSOLE 0 -#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED /* Define if want to do post memory test */ #undef CONFIG_POST diff --git a/include/configs/bf538f-ezkit.h b/include/configs/bf538f-ezkit.h index 32df5ec8f0..a65528246d 100644 --- a/include/configs/bf538f-ezkit.h +++ b/include/configs/bf538f-ezkit.h @@ -135,7 +135,6 @@ */ #define CONFIG_RTC_BFIN #define CONFIG_UART_CONSOLE 0 -#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED /* * Pull in common ADI header for remaining command/environment setup diff --git a/include/configs/bf548-ezkit.h b/include/configs/bf548-ezkit.h index 1a245a2b81..da5f029435 100644 --- a/include/configs/bf548-ezkit.h +++ b/include/configs/bf548-ezkit.h @@ -181,7 +181,6 @@ #define CONFIG_RTC_BFIN #define CONFIG_UART_CONSOLE 1 #define CONFIG_BFIN_SPI_IMG_SIZE 0x50000 -#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED #define CONFIG_ADI_GPIO2 diff --git a/include/configs/bf561-acvilon.h b/include/configs/bf561-acvilon.h index 3db917e37b..6871d8c422 100644 --- a/include/configs/bf561-acvilon.h +++ b/include/configs/bf561-acvilon.h @@ -160,7 +160,6 @@ #define CONFIG_UART_CONSOLE 0 #define CONFIG_BAUDRATE 57600 #define CONFIG_SYS_PROMPT "Acvilon> " -#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED /* * Pull in common ADI header for remaining command/environment setup diff --git a/include/configs/bf561-ezkit.h b/include/configs/bf561-ezkit.h index 0a309d9269..fb6f94873a 100644 --- a/include/configs/bf561-ezkit.h +++ b/include/configs/bf561-ezkit.h @@ -102,7 +102,6 @@ * Misc Settings */ #define CONFIG_UART_CONSOLE 0 -#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED /* * Run core 1 from L1 SRAM start address when init uboot on core 0 diff --git a/include/configs/br4.h b/include/configs/br4.h index f8d3158d47..3f240085e3 100644 --- a/include/configs/br4.h +++ b/include/configs/br4.h @@ -135,7 +135,6 @@ #define CONFIG_BOOTCOMMAND "run nandboot" #define CONFIG_BOOTDELAY 2 #define CONFIG_LOADADDR 0x2000000 -#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED /* * Pull in common ADI header for remaining command/environment setup diff --git a/include/configs/bur_am335x_common.h b/include/configs/bur_am335x_common.h index 3f889f8d4f..e9d5d01620 100644 --- a/include/configs/bur_am335x_common.h +++ b/include/configs/bur_am335x_common.h @@ -151,7 +151,6 @@ #undef CONFIG_CMD_NFS #undef CONFIG_CMD_SETGETDCR #undef CONFIG_CMD_XIMG -#undef CONFIG_CMD_CRC32 /* define command we need always */ #define CONFIG_CMD_ECHO #define CONFIG_CMD_SOURCE diff --git a/include/configs/cardhu.h b/include/configs/cardhu.h index 59f429cf57..09129c7767 100644 --- a/include/configs/cardhu.h +++ b/include/configs/cardhu.h @@ -24,11 +24,6 @@ /* VDD core PMIC */ #define CONFIG_TEGRA_VDD_CORE_TPS62361B_SET3 -/* Enable fdt support for Cardhu. Flash the image in u-boot-dtb.bin */ -#define CONFIG_DEFAULT_DEVICE_TREE tegra30-cardhu -#define CONFIG_OF_CONTROL -#define CONFIG_OF_SEPARATE - /* High-level configuration options */ #define V_PROMPT "Tegra30 (Cardhu) # " #define CONFIG_TEGRA_BOARD_STRING "NVIDIA Cardhu" diff --git a/include/configs/cm-bf527.h b/include/configs/cm-bf527.h index 8d3ae49913..f5351ad264 100644 --- a/include/configs/cm-bf527.h +++ b/include/configs/cm-bf527.h @@ -128,7 +128,6 @@ #define FLASHBOOT_ENV_SETTINGS \ "flashboot=flread 20040000 1000000 300000;" \ "bootm 0x1000000\0" -#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED /* * Pull in common ADI header for remaining command/environment setup diff --git a/include/configs/cm-bf533.h b/include/configs/cm-bf533.h index 8bd499a7d2..485f01a01c 100644 --- a/include/configs/cm-bf533.h +++ b/include/configs/cm-bf533.h @@ -97,7 +97,6 @@ #define CONFIG_UART_CONSOLE 0 #define CONFIG_BOOTCOMMAND "run flashboot" #define FLASHBOOT_ENV_SETTINGS "flashboot=bootm 0x20040000\0" -#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED /* * Pull in common ADI header for remaining command/environment setup diff --git a/include/configs/cm-bf537e.h b/include/configs/cm-bf537e.h index 47967d7120..1729b44a1b 100644 --- a/include/configs/cm-bf537e.h +++ b/include/configs/cm-bf537e.h @@ -146,7 +146,6 @@ "flashboot=flread 20040000 1000000 3c0000;" \ "bootm 0x1000000\0" #define CONFIG_BOARD_SIZE_LIMIT $$((384 * 1024)) -#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED /* * Pull in common ADI header for remaining command/environment setup diff --git a/include/configs/cm-bf537u.h b/include/configs/cm-bf537u.h index 88c99821b1..272aa744a9 100644 --- a/include/configs/cm-bf537u.h +++ b/include/configs/cm-bf537u.h @@ -143,7 +143,6 @@ "flashboot=flread 20040000 1000000 300000;" \ "bootm 0x1000000\0" #define CONFIG_BOARD_SIZE_LIMIT $$((384 * 1024)) -#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED /* * Pull in common ADI header for remaining command/environment setup diff --git a/include/configs/cm-bf548.h b/include/configs/cm-bf548.h index 346e27f3eb..7f27eda416 100644 --- a/include/configs/cm-bf548.h +++ b/include/configs/cm-bf548.h @@ -117,7 +117,6 @@ #define CONFIG_UART_CONSOLE 1 #define CONFIG_BOOTCOMMAND "run flashboot" #define FLASHBOOT_ENV_SETTINGS "flashboot=bootm 0x20040000\0" -#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED #define CONFIG_ADI_GPIO2 diff --git a/include/configs/cm-bf561.h b/include/configs/cm-bf561.h index 5265e5f6ef..96910a7afd 100644 --- a/include/configs/cm-bf561.h +++ b/include/configs/cm-bf561.h @@ -99,7 +99,6 @@ #define CONFIG_UART_CONSOLE 0 #define CONFIG_BOOTCOMMAND "run flashboot" #define FLASHBOOT_ENV_SETTINGS "flashboot=bootm 0x20040000\0" -#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED /* * Pull in common ADI header for remaining command/environment setup diff --git a/include/configs/colibri_t20_iris.h b/include/configs/colibri_t20_iris.h index 6f9e08cac0..2b876fede1 100644 --- a/include/configs/colibri_t20_iris.h +++ b/include/configs/colibri_t20_iris.h @@ -9,11 +9,6 @@ #include "tegra20-common.h" -/* Enable FDT support */ -#define CONFIG_DEFAULT_DEVICE_TREE tegra20-colibri_t20_iris -#define CONFIG_OF_CONTROL -#define CONFIG_OF_SEPARATE - /* High-level configuration options */ #define V_PROMPT "Tegra20 (Colibri) # " #define CONFIG_TEGRA_BOARD_STRING "Toradex Colibri T20 on Iris" diff --git a/include/configs/colibri_t30.h b/include/configs/colibri_t30.h index eacff5b792..782b9d16b7 100644 --- a/include/configs/colibri_t30.h +++ b/include/configs/colibri_t30.h @@ -11,9 +11,6 @@ #include "tegra30-common.h" -#define CONFIG_DEFAULT_DEVICE_TREE tegra30-colibri -#define CONFIG_OF_CONTROL -#define CONFIG_OF_SEPARATE #define V_PROMPT "Colibri T30 # " #define CONFIG_TEGRA_BOARD_STRING "Toradex Colibri T30" diff --git a/include/configs/controlcenterd.h b/include/configs/controlcenterd.h index 7eaaf69951..bfcfa0c8c9 100644 --- a/include/configs/controlcenterd.h +++ b/include/configs/controlcenterd.h @@ -434,7 +434,6 @@ #define CONFIG_BOARD_EARLY_INIT_F #define CONFIG_BOARD_EARLY_INIT_R #define CONFIG_LAST_STAGE_INIT -#undef CONFIG_CMD_BOOTM #endif /* CONFIG_TRAILBLAZER */ diff --git a/include/configs/coreboot.h b/include/configs/coreboot.h index a1a63a018d..936be14511 100644 --- a/include/configs/coreboot.h +++ b/include/configs/coreboot.h @@ -28,9 +28,6 @@ #define CONFIG_LMB #define CONFIG_OF_LIBFDT -#define CONFIG_OF_CONTROL -#define CONFIG_OF_SEPARATE -#define CONFIG_DEFAULT_DEVICE_TREE link #define CONFIG_BOOTSTAGE #define CONFIG_BOOTSTAGE_REPORT diff --git a/include/configs/da850evm.h b/include/configs/da850evm.h index 1252d7a54a..5f85755737 100644 --- a/include/configs/da850evm.h +++ b/include/configs/da850evm.h @@ -157,8 +157,6 @@ #define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_SPI_FLASH_SUPPORT #define CONFIG_SPL_SPI_LOAD -#define CONFIG_SPL_SPI_BUS 0 -#define CONFIG_SPL_SPI_CS 0 #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x8000 #define CONFIG_SYS_SPI_U_BOOT_SIZE 0x30000 #endif @@ -376,8 +374,6 @@ #define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_SPI_FLASH_SUPPORT #define CONFIG_SPL_SPI_LOAD -#define CONFIG_SPL_SPI_BUS 0 -#define CONFIG_SPL_SPI_CS 0 #define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_LIBCOMMON_SUPPORT #define CONFIG_SPL_LIBGENERIC_SUPPORT diff --git a/include/configs/dalmore.h b/include/configs/dalmore.h index fd774a3314..ff7ec4a93b 100644 --- a/include/configs/dalmore.h +++ b/include/configs/dalmore.h @@ -21,11 +21,6 @@ #include "tegra114-common.h" -/* Enable fdt support for Dalmore. Flash the image in u-boot-dtb.bin */ -#define CONFIG_DEFAULT_DEVICE_TREE tegra114-dalmore -#define CONFIG_OF_CONTROL -#define CONFIG_OF_SEPARATE - /* High-level configuration options */ #define V_PROMPT "Tegra114 (Dalmore) # " #define CONFIG_TEGRA_BOARD_STRING "NVIDIA Dalmore" diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h index 4143a4ddeb..2eaabdefee 100644 --- a/include/configs/dra7xx_evm.h +++ b/include/configs/dra7xx_evm.h @@ -116,8 +116,6 @@ #define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_SPI_LOAD #define CONFIG_SPL_SPI_FLASH_SUPPORT -#define CONFIG_SPL_SPI_BUS 0 -#define CONFIG_SPL_SPI_CS 0 #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x40000 #define CONFIG_SUPPORT_EMMC_BOOT diff --git a/include/configs/embestmx6boards.h b/include/configs/embestmx6boards.h index a7fd43bc7b..185edbe7fe 100644 --- a/include/configs/embestmx6boards.h +++ b/include/configs/embestmx6boards.h @@ -102,7 +102,7 @@ #define CONFIG_SPI_FLASH_SST #define CONFIG_MXC_SPI #define CONFIG_SF_DEFAULT_BUS 0 -#define CONFIG_SF_DEFAULT_CS (0 | (IMX_GPIO_NR(2, 30) << 8)) +#define CONFIG_SF_DEFAULT_CS 0 #define CONFIG_SF_DEFAULT_SPEED 20000000 #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 #endif diff --git a/include/configs/exynos4-dt.h b/include/configs/exynos4-dt.h index 7dac1a3717..99472acd0c 100644 --- a/include/configs/exynos4-dt.h +++ b/include/configs/exynos4-dt.h @@ -22,10 +22,6 @@ #define CONFIG_BOARD_COMMON #define CONFIG_SYS_GENERIC_BOARD -/* Enable fdt support */ -#define CONFIG_OF_CONTROL -#define CONFIG_OF_SEPARATE - #define CONFIG_SYS_CACHELINE_SIZE 32 /* input clock of PLL: EXYNOS4 boards have 24MHz input clock */ diff --git a/include/configs/exynos5-dt.h b/include/configs/exynos5-dt.h index a7c6292863..1dc3002523 100644 --- a/include/configs/exynos5-dt.h +++ b/include/configs/exynos5-dt.h @@ -24,10 +24,6 @@ #define CONFIG_ARCH_EARLY_INIT_R #define CONFIG_EXYNOS_SPL -/* Enable fdt support for Exynos5250 */ -#define CONFIG_OF_CONTROL -#define CONFIG_OF_SEPARATE - /* Allow tracing to be enabled */ #define CONFIG_TRACE #define CONFIG_CMD_TRACE diff --git a/include/configs/gw_ventana.h b/include/configs/gw_ventana.h index 0e5c20097d..620f9501d2 100644 --- a/include/configs/gw_ventana.h +++ b/include/configs/gw_ventana.h @@ -61,7 +61,7 @@ #define CONFIG_SPI_FLASH_BAR #define CONFIG_SPI_FLASH_WINBOND #define CONFIG_SF_DEFAULT_BUS 0 - #define CONFIG_SF_DEFAULT_CS (0|(IMX_GPIO_NR(3, 19)<<8)) + #define CONFIG_SF_DEFAULT_CS 0 /* GPIO 3-19 (21248) */ #define CONFIG_SF_DEFAULT_SPEED 30000000 #define CONFIG_SF_DEFAULT_MODE (SPI_MODE_0) diff --git a/include/configs/h2200.h b/include/configs/h2200.h index 9470ad6abc..109cee985b 100644 --- a/include/configs/h2200.h +++ b/include/configs/h2200.h @@ -116,7 +116,6 @@ #define CONFIG_BAUDRATE 115200 #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 38400, 115200 } -#define CONFIG_CMD_IMPORTENV 1 #define CONFIG_CMD_LOADB #define CONFIG_CMD_SOURCE #define CONFIG_CMD_RUN diff --git a/include/configs/harmony.h b/include/configs/harmony.h index 3ec0e418c1..ff9fbc9965 100644 --- a/include/configs/harmony.h +++ b/include/configs/harmony.h @@ -11,11 +11,6 @@ #include <linux/sizes.h> #include "tegra20-common.h" -/* Enable fdt support for Harmony. Flash the image in u-boot-dtb.bin */ -#define CONFIG_DEFAULT_DEVICE_TREE tegra20-harmony -#define CONFIG_OF_CONTROL -#define CONFIG_OF_SEPARATE - /* High-level configuration options */ #define V_PROMPT "Tegra20 (Harmony) # " #define CONFIG_TEGRA_BOARD_STRING "NVIDIA Harmony" diff --git a/include/configs/ip04.h b/include/configs/ip04.h index 3767502faa..ec510bdac4 100644 --- a/include/configs/ip04.h +++ b/include/configs/ip04.h @@ -133,7 +133,6 @@ #define CONFIG_BAUDRATE 115200 #define CONFIG_MISC_INIT_R /* needed for MAC address */ #define CONFIG_UART_CONSOLE 0 -#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED #undef CONFIG_SHOW_BOOT_PROGRESS /* Enable this if bootretry required; currently it's disabled */ diff --git a/include/configs/jetson-tk1.h b/include/configs/jetson-tk1.h index d03a66cd22..d67c025b9c 100644 --- a/include/configs/jetson-tk1.h +++ b/include/configs/jetson-tk1.h @@ -12,11 +12,6 @@ #include "tegra124-common.h" -/* Enable fdt support for Jetson TK1. Flash the image in u-boot-dtb.bin */ -#define CONFIG_DEFAULT_DEVICE_TREE tegra124-jetson-tk1 -#define CONFIG_OF_CONTROL -#define CONFIG_OF_SEPARATE - /* High-level configuration options */ #define V_PROMPT "Tegra124 (Jetson TK1) # " #define CONFIG_TEGRA_BOARD_STRING "NVIDIA Jetson TK1" diff --git a/include/configs/ks2_evm.h b/include/configs/ks2_evm.h index 43db581c75..51926f721f 100644 --- a/include/configs/ks2_evm.h +++ b/include/configs/ks2_evm.h @@ -58,8 +58,6 @@ #define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_BOARD_INIT #define CONFIG_SPL_SPI_LOAD -#define CONFIG_SPL_SPI_BUS 0 -#define CONFIG_SPL_SPI_CS 0 #define CONFIG_SYS_SPI_U_BOOT_OFFS CONFIG_SPL_PAD_TO #define CONFIG_SPL_FRAMEWORK diff --git a/include/configs/kwb.h b/include/configs/kwb.h index 0860434f22..29b263f301 100644 --- a/include/configs/kwb.h +++ b/include/configs/kwb.h @@ -89,7 +89,6 @@ #undef CONFIG_BOOTM_RTEMS #undef CONFIG_GZIP #undef CONFIG_ZLIB -#undef CONFIG_CMD_CRC32 /* USB configuration */ #define CONFIG_USB_MUSB_DSPS diff --git a/include/configs/medcom-wide.h b/include/configs/medcom-wide.h index 40155c3796..ac5208fa0d 100644 --- a/include/configs/medcom-wide.h +++ b/include/configs/medcom-wide.h @@ -12,11 +12,6 @@ #include "tegra20-common.h" -/* Enable fdt support for Medcom-Wide. Flash the image in u-boot-dtb.bin */ -#define CONFIG_DEFAULT_DEVICE_TREE tegra20-medcom-wide -#define CONFIG_OF_CONTROL -#define CONFIG_OF_SEPARATE - /* High-level configuration options */ #define V_PROMPT "Tegra20 (Medcom-Wide) # " #define CONFIG_TEGRA_BOARD_STRING "Avionic Design Medcom-Wide" diff --git a/include/configs/microblaze-generic.h b/include/configs/microblaze-generic.h index 1a82a57c75..bb07060002 100644 --- a/include/configs/microblaze-generic.h +++ b/include/configs/microblaze-generic.h @@ -14,11 +14,6 @@ /* MicroBlaze CPU */ #define MICROBLAZE_V5 1 -/* Open Firmware DTS */ -#define CONFIG_OF_CONTROL 1 -#define CONFIG_OF_EMBED 1 -#define CONFIG_DEFAULT_DEVICE_TREE microblaze-generic - /* linear and spi flash memory */ #ifdef XILINX_FLASH_START #define FLASH diff --git a/include/configs/mx51_efikamx.h b/include/configs/mx51_efikamx.h index 0f2a4ef973..fce7ead977 100644 --- a/include/configs/mx51_efikamx.h +++ b/include/configs/mx51_efikamx.h @@ -96,11 +96,11 @@ #define CONFIG_SPI_FLASH #define CONFIG_SPI_FLASH_SST -#define CONFIG_SF_DEFAULT_CS (1 | 121 << 8) +#define CONFIG_SF_DEFAULT_CS 1 #define CONFIG_SF_DEFAULT_MODE (SPI_MODE_0) #define CONFIG_SF_DEFAULT_SPEED 25000000 -#define CONFIG_ENV_SPI_CS (1 | 121 << 8) +#define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS #define CONFIG_ENV_SPI_BUS 0 #define CONFIG_ENV_SPI_MAX_HZ 25000000 #define CONFIG_ENV_SPI_MODE (SPI_MODE_0) diff --git a/include/configs/mx6sabre_common.h b/include/configs/mx6sabre_common.h index e59a3b4b05..2d93d6c700 100644 --- a/include/configs/mx6sabre_common.h +++ b/include/configs/mx6sabre_common.h @@ -74,7 +74,7 @@ #define CONFIG_SPI_FLASH_STMICRO #define CONFIG_MXC_SPI #define CONFIG_SF_DEFAULT_BUS 0 -#define CONFIG_SF_DEFAULT_CS (0 | (IMX_GPIO_NR(4, 9) << 8)) +#define CONFIG_SF_DEFAULT_CS 0 #define CONFIG_SF_DEFAULT_SPEED 20000000 #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 #endif diff --git a/include/configs/mx6slevk.h b/include/configs/mx6slevk.h index 194d7bdb76..4208ba1563 100644 --- a/include/configs/mx6slevk.h +++ b/include/configs/mx6slevk.h @@ -205,7 +205,7 @@ #define CONFIG_SPI_FLASH_STMICRO #define CONFIG_MXC_SPI #define CONFIG_SF_DEFAULT_BUS 0 -#define CONFIG_SF_DEFAULT_CS (0 | (IMX_GPIO_NR(4, 11) << 8)) +#define CONFIG_SF_DEFAULT_CS 0 #define CONFIG_SF_DEFAULT_SPEED 20000000 #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 #endif diff --git a/include/configs/nitrogen6x.h b/include/configs/nitrogen6x.h index d4b0ac9fdb..39d5bb34bb 100644 --- a/include/configs/nitrogen6x.h +++ b/include/configs/nitrogen6x.h @@ -53,7 +53,7 @@ #define CONFIG_SPI_FLASH_SST #define CONFIG_MXC_SPI #define CONFIG_SF_DEFAULT_BUS 0 -#define CONFIG_SF_DEFAULT_CS (0|(IMX_GPIO_NR(3, 19)<<8)) +#define CONFIG_SF_DEFAULT_CS 0 #define CONFIG_SF_DEFAULT_SPEED 25000000 #define CONFIG_SF_DEFAULT_MODE (SPI_MODE_0) #endif diff --git a/include/configs/odroid.h b/include/configs/odroid.h index 29dcc4a298..b616ac2fbd 100644 --- a/include/configs/odroid.h +++ b/include/configs/odroid.h @@ -16,8 +16,6 @@ #define CONFIG_SYS_PROMPT "Odroid # " /* Monitor Command Prompt */ -#undef CONFIG_DEFAULT_DEVICE_TREE -#define CONFIG_DEFAULT_DEVICE_TREE exynos4412-odroid #define CONFIG_SYS_L2CACHE_OFF #ifndef CONFIG_SYS_L2CACHE_OFF diff --git a/include/configs/origen.h b/include/configs/origen.h index 5d24916389..fb1536c62c 100644 --- a/include/configs/origen.h +++ b/include/configs/origen.h @@ -13,8 +13,6 @@ #define CONFIG_SYS_PROMPT "ORIGEN # " -#undef CONFIG_DEFAULT_DEVICE_TREE -#define CONFIG_DEFAULT_DEVICE_TREE exynos4210-origen /* High Level Configuration Options */ #define CONFIG_EXYNOS4210 1 /* which is a EXYNOS4210 SoC */ diff --git a/include/configs/paz00.h b/include/configs/paz00.h index dd0abf8de6..45bb47088b 100644 --- a/include/configs/paz00.h +++ b/include/configs/paz00.h @@ -20,11 +20,6 @@ #include <linux/sizes.h> #include "tegra20-common.h" -/* Enable fdt support for Paz00. Flash the image in u-boot-dtb.bin */ -#define CONFIG_DEFAULT_DEVICE_TREE tegra20-paz00 -#define CONFIG_OF_CONTROL -#define CONFIG_OF_SEPARATE - /* High-level configuration options */ #define V_PROMPT "Tegra20 (Paz00) MOD # " #define CONFIG_TEGRA_BOARD_STRING "Compal Paz00" diff --git a/include/configs/pcm051.h b/include/configs/pcm051.h index 5efcd7613f..7d102a4699 100644 --- a/include/configs/pcm051.h +++ b/include/configs/pcm051.h @@ -128,8 +128,6 @@ #define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_SPI_FLASH_SUPPORT #define CONFIG_SPL_SPI_LOAD -#define CONFIG_SPL_SPI_BUS 0 -#define CONFIG_SPL_SPI_CS 0 #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000 #define CONFIG_SYS_SPI_U_BOOT_SIZE 0x40000 #endif diff --git a/include/configs/peach-pit.h b/include/configs/peach-pit.h index 88c093fb9b..987cef504c 100644 --- a/include/configs/peach-pit.h +++ b/include/configs/peach-pit.h @@ -13,8 +13,6 @@ #include <configs/exynos5420.h> -#undef CONFIG_DEFAULT_DEVICE_TREE -#define CONFIG_DEFAULT_DEVICE_TREE exynos5420-peach-pit /* select serial console configuration */ #define CONFIG_SERIAL3 /* use SERIAL 3 */ diff --git a/include/configs/plutux.h b/include/configs/plutux.h index a473f232f3..b663b89d2c 100644 --- a/include/configs/plutux.h +++ b/include/configs/plutux.h @@ -12,11 +12,6 @@ #include "tegra20-common.h" -/* Enable fdt support for Plutux. Flash the image in u-boot-dtb.bin */ -#define CONFIG_DEFAULT_DEVICE_TREE tegra20-plutux -#define CONFIG_OF_CONTROL -#define CONFIG_OF_SEPARATE - /* High-level configuration options */ #define V_PROMPT "Tegra20 (Plutux) # " #define CONFIG_TEGRA_BOARD_STRING "Avionic Design Plutux" diff --git a/include/configs/pr1.h b/include/configs/pr1.h index e96ed4b4f2..0f57e868a5 100644 --- a/include/configs/pr1.h +++ b/include/configs/pr1.h @@ -135,7 +135,6 @@ #define CONFIG_BOOTCOMMAND "run nandboot" #define CONFIG_BOOTDELAY 2 #define CONFIG_LOADADDR 0x2000000 -#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED /* * Pull in common ADI header for remaining command/environment setup diff --git a/include/configs/s5pc210_universal.h b/include/configs/s5pc210_universal.h index 20985da9a0..082d51c52b 100644 --- a/include/configs/s5pc210_universal.h +++ b/include/configs/s5pc210_universal.h @@ -14,8 +14,6 @@ #define CONFIG_SYS_PROMPT "Universal # " /* Monitor Command Prompt */ -#undef CONFIG_DEFAULT_DEVICE_TREE -#define CONFIG_DEFAULT_DEVICE_TREE exynos4210-universal_c210 #define CONFIG_TIZEN /* TIZEN lib */ diff --git a/include/configs/sama5d3xek.h b/include/configs/sama5d3xek.h index 0104d5f90a..c46baf254f 100644 --- a/include/configs/sama5d3xek.h +++ b/include/configs/sama5d3xek.h @@ -298,8 +298,6 @@ #define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_SPI_FLASH_SUPPORT #define CONFIG_SPL_SPI_LOAD -#define CONFIG_SPL_SPI_BUS 0 -#define CONFIG_SPL_SPI_CS 0 #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x8400 #endif diff --git a/include/configs/sandbox.h b/include/configs/sandbox.h index f5fa4b3ddc..5d364164c0 100644 --- a/include/configs/sandbox.h +++ b/include/configs/sandbox.h @@ -38,15 +38,12 @@ /* Number of bits in a C 'long' on this architecture */ #define CONFIG_SANDBOX_BITS_PER_LONG 64 -#define CONFIG_OF_CONTROL -#define CONFIG_OF_HOSTFILE #define CONFIG_OF_LIBFDT #define CONFIG_LMB #define CONFIG_FIT #define CONFIG_FIT_SIGNATURE #define CONFIG_RSA #define CONFIG_CMD_FDT -#define CONFIG_DEFAULT_DEVICE_TREE sandbox #define CONFIG_ANDROID_BOOT_IMAGE #define CONFIG_FS_FAT diff --git a/include/configs/seaboard.h b/include/configs/seaboard.h index fc4f976d8d..04e4f82759 100644 --- a/include/configs/seaboard.h +++ b/include/configs/seaboard.h @@ -19,11 +19,6 @@ #include "tegra20-common.h" -/* Enable fdt support for Seaboard. Flash the image in u-boot-dtb.bin */ -#define CONFIG_DEFAULT_DEVICE_TREE tegra20-seaboard -#define CONFIG_OF_CONTROL -#define CONFIG_OF_SEPARATE - /* High-level configuration options */ #define V_PROMPT "Tegra20 (SeaBoard) # " #define CONFIG_TEGRA_BOARD_STRING "NVIDIA Seaboard" diff --git a/include/configs/siemens-am33x-common.h b/include/configs/siemens-am33x-common.h index b8fb77e813..bf9752f874 100644 --- a/include/configs/siemens-am33x-common.h +++ b/include/configs/siemens-am33x-common.h @@ -167,8 +167,6 @@ #define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_SPI_FLASH_SUPPORT #define CONFIG_SPL_SPI_LOAD -#define CONFIG_SPL_SPI_BUS 0 -#define CONFIG_SPL_SPI_CS 0 #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000 #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/am33xx/u-boot-spl.lds" diff --git a/include/configs/smdk5250.h b/include/configs/smdk5250.h index 66fa1799e7..61170941c1 100644 --- a/include/configs/smdk5250.h +++ b/include/configs/smdk5250.h @@ -11,8 +11,6 @@ #include <configs/exynos5250-dt.h> -#undef CONFIG_DEFAULT_DEVICE_TREE -#define CONFIG_DEFAULT_DEVICE_TREE exynos5250-smdk5250 /* Enable FIT support and comparison */ #define CONFIG_FIT diff --git a/include/configs/smdk5420.h b/include/configs/smdk5420.h index 606739b02e..36a156f7a7 100644 --- a/include/configs/smdk5420.h +++ b/include/configs/smdk5420.h @@ -15,8 +15,6 @@ #define CONFIG_SMDK5420 /* which is in a SMDK5420 */ -#undef CONFIG_DEFAULT_DEVICE_TREE -#define CONFIG_DEFAULT_DEVICE_TREE exynos5420-smdk5420 /* select serial console configuration */ #define CONFIG_SERIAL3 /* use SERIAL 3 */ diff --git a/include/configs/snow.h b/include/configs/snow.h index 673fa1469b..fbaaa593cc 100644 --- a/include/configs/snow.h +++ b/include/configs/snow.h @@ -11,8 +11,6 @@ #include <configs/exynos5250-dt.h> -#undef CONFIG_DEFAULT_DEVICE_TREE -#define CONFIG_DEFAULT_DEVICE_TREE exynos5250-snow /* Enable FIT support and comparison */ #define CONFIG_FIT diff --git a/include/configs/tcm-bf518.h b/include/configs/tcm-bf518.h index a77ba697d0..66730267a3 100644 --- a/include/configs/tcm-bf518.h +++ b/include/configs/tcm-bf518.h @@ -116,7 +116,6 @@ #define CONFIG_UART_CONSOLE 0 #define CONFIG_BOOTCOMMAND "run flashboot" #define FLASHBOOT_ENV_SETTINGS "flashboot=bootm 0x20040000\0" -#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED /* * Pull in common ADI header for remaining command/environment setup diff --git a/include/configs/tcm-bf537.h b/include/configs/tcm-bf537.h index c4c1c579bc..999834351f 100644 --- a/include/configs/tcm-bf537.h +++ b/include/configs/tcm-bf537.h @@ -145,7 +145,6 @@ "flashboot=flread 20040000 1000000 300000;" \ "bootm 0x1000000\0" #define CONFIG_BOARD_SIZE_LIMIT $$((384 * 1024)) -#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED /* * Pull in common ADI header for remaining command/environment setup diff --git a/include/configs/tec-ng.h b/include/configs/tec-ng.h index 13baa76f91..51f87dacdb 100644 --- a/include/configs/tec-ng.h +++ b/include/configs/tec-ng.h @@ -10,11 +10,6 @@ #include "tegra30-common.h" -/* Enable fdt support for tec-ng. Flash the image in u-boot-dtb.bin */ -#define CONFIG_DEFAULT_DEVICE_TREE tegra30-tec-ng -#define CONFIG_OF_CONTROL -#define CONFIG_OF_SEPARATE - /* High-level configuration options */ #define V_PROMPT "Tegra30 (TEC-NG) # " #define CONFIG_TEGRA_BOARD_STRING "Avionic Design Tamonten™ NG Evaluation Carrier" diff --git a/include/configs/tec.h b/include/configs/tec.h index 90e7b7ad97..9ea4ff4971 100644 --- a/include/configs/tec.h +++ b/include/configs/tec.h @@ -12,11 +12,6 @@ #include "tegra20-common.h" -/* Enable fdt support for TEC. Flash the image in u-boot-dtb.bin */ -#define CONFIG_DEFAULT_DEVICE_TREE tegra20-tec -#define CONFIG_OF_CONTROL -#define CONFIG_OF_SEPARATE - /* High-level configuration options */ #define V_PROMPT "Tegra20 (TEC) # " #define CONFIG_TEGRA_BOARD_STRING "Avionic Design Tamonten Evaluation Carrier" diff --git a/include/configs/tegra-common-post.h b/include/configs/tegra-common-post.h index c337e3016e..23e3c8af31 100644 --- a/include/configs/tegra-common-post.h +++ b/include/configs/tegra-common-post.h @@ -69,7 +69,6 @@ /* remove devicetree support */ #ifdef CONFIG_OF_CONTROL -#undef CONFIG_OF_CONTROL #endif /* remove I2C support */ diff --git a/include/configs/trats.h b/include/configs/trats.h index 6fa646bb8c..43751e7938 100644 --- a/include/configs/trats.h +++ b/include/configs/trats.h @@ -16,8 +16,6 @@ #define CONFIG_TRATS -#undef CONFIG_DEFAULT_DEVICE_TREE -#define CONFIG_DEFAULT_DEVICE_TREE exynos4210-trats #define CONFIG_TIZEN /* TIZEN lib */ diff --git a/include/configs/trats2.h b/include/configs/trats2.h index 14508650e4..e9a04f7af3 100644 --- a/include/configs/trats2.h +++ b/include/configs/trats2.h @@ -15,8 +15,6 @@ #define CONFIG_SYS_PROMPT "Trats2 # " /* Monitor Command Prompt */ -#undef CONFIG_DEFAULT_DEVICE_TREE -#define CONFIG_DEFAULT_DEVICE_TREE exynos4412-trats2 #define CONFIG_TIZEN /* TIZEN lib */ diff --git a/include/configs/trimslice.h b/include/configs/trimslice.h index f81cfa2e35..7c0064267d 100644 --- a/include/configs/trimslice.h +++ b/include/configs/trimslice.h @@ -11,11 +11,6 @@ #include <linux/sizes.h> #include "tegra20-common.h" -/* Enable fdt support for TrimSlice. Flash the image in u-boot-dtb.bin */ -#define CONFIG_DEFAULT_DEVICE_TREE tegra20-trimslice -#define CONFIG_OF_CONTROL -#define CONFIG_OF_SEPARATE - /* High-level configuration options */ #define V_PROMPT "Tegra20 (TrimSlice) # " #define CONFIG_TEGRA_BOARD_STRING "Compulab Trimslice" diff --git a/include/configs/tseries.h b/include/configs/tseries.h index 1dd13fd1b0..9a6207048c 100644 --- a/include/configs/tseries.h +++ b/include/configs/tseries.h @@ -222,8 +222,6 @@ #define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_SPI_FLASH_SUPPORT #define CONFIG_SPL_SPI_LOAD -#define CONFIG_SPL_SPI_BUS 0 -#define CONFIG_SPL_SPI_CS 0 #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000 #undef CONFIG_ENV_IS_NOWHERE #define CONFIG_ENV_IS_IN_SPI_FLASH diff --git a/include/configs/vct.h b/include/configs/vct.h index 5ab4de3274..217ba2fbd9 100644 --- a/include/configs/vct.h +++ b/include/configs/vct.h @@ -296,7 +296,6 @@ int vct_gpio_get(int pin); #undef CONFIG_CMD_BEDBUG #undef CONFIG_CMD_CACHE #undef CONFIG_CMD_CONSOLE -#undef CONFIG_CMD_CRC32 #undef CONFIG_CMD_DHCP #undef CONFIG_CMD_EEPROM #undef CONFIG_CMD_EEPROM diff --git a/include/configs/venice2.h b/include/configs/venice2.h index 6d4e9991a1..6897aa8aa3 100644 --- a/include/configs/venice2.h +++ b/include/configs/venice2.h @@ -12,11 +12,6 @@ #include "tegra124-common.h" -/* Enable fdt support for Venice2. Flash the image in u-boot-dtb.bin */ -#define CONFIG_DEFAULT_DEVICE_TREE tegra124-venice2 -#define CONFIG_OF_CONTROL -#define CONFIG_OF_SEPARATE - /* High-level configuration options */ #define V_PROMPT "Tegra124 (Venice2) # " #define CONFIG_TEGRA_BOARD_STRING "NVIDIA Venice2" diff --git a/include/configs/ventana.h b/include/configs/ventana.h index edf3720b61..f195f8a6ea 100644 --- a/include/configs/ventana.h +++ b/include/configs/ventana.h @@ -11,11 +11,6 @@ #include <linux/sizes.h> #include "tegra20-common.h" -/* Enable fdt support for Ventana. Flash the image in u-boot-dtb.bin */ -#define CONFIG_DEFAULT_DEVICE_TREE tegra20-ventana -#define CONFIG_OF_CONTROL -#define CONFIG_OF_SEPARATE - /* High-level configuration options */ #define V_PROMPT "Tegra20 (Ventana) # " #define CONFIG_TEGRA_BOARD_STRING "NVIDIA Ventana" diff --git a/include/configs/vexpress_aemv8a.h b/include/configs/vexpress_aemv8a.h index 0897932095..f3af971214 100644 --- a/include/configs/vexpress_aemv8a.h +++ b/include/configs/vexpress_aemv8a.h @@ -51,7 +51,6 @@ /* Flat Device Tree Definitions */ #define CONFIG_OF_LIBFDT -#define CONFIG_DEFAULT_DEVICE_TREE vexpress64 /* SMP Spin Table Definitions */ #ifdef CONFIG_BASE_FVP diff --git a/include/configs/vision2.h b/include/configs/vision2.h index 6891bf8b15..3f35076f9e 100644 --- a/include/configs/vision2.h +++ b/include/configs/vision2.h @@ -57,11 +57,11 @@ * Use gpio 4 pin 25 as chip select for SPI flash * This corresponds to gpio 121 */ -#define CONFIG_SF_DEFAULT_CS (1 | (121 << 8)) +#define CONFIG_SF_DEFAULT_CS 1 #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 #define CONFIG_SF_DEFAULT_SPEED 25000000 -#define CONFIG_ENV_SPI_CS (1 | (121 << 8)) +#define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS #define CONFIG_ENV_SPI_BUS 0 #define CONFIG_ENV_SPI_MAX_HZ 25000000 #define CONFIG_ENV_SPI_MODE SPI_MODE_0 diff --git a/include/configs/whistler.h b/include/configs/whistler.h index 9e09f03d52..10e70d28b1 100644 --- a/include/configs/whistler.h +++ b/include/configs/whistler.h @@ -11,11 +11,6 @@ #include <linux/sizes.h> #include "tegra20-common.h" -/* Enable fdt support for Whistler. Flash the image in u-boot-dtb.bin */ -#define CONFIG_DEFAULT_DEVICE_TREE tegra20-whistler -#define CONFIG_OF_CONTROL -#define CONFIG_OF_SEPARATE - /* High-level configuration options */ #define V_PROMPT "Tegra20 (Whistler) # " #define CONFIG_TEGRA_BOARD_STRING "NVIDIA Whistler" diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h index 875cb43f15..0b4dd665b8 100644 --- a/include/configs/zynq-common.h +++ b/include/configs/zynq-common.h @@ -227,8 +227,6 @@ #define CONFIG_IMAGE_FORMAT_LEGACY /* enable also legacy image format */ /* FDT support */ -#define CONFIG_OF_CONTROL -#define CONFIG_OF_SEPARATE #define CONFIG_DISPLAY_BOARDINFO_LATE /* RSA support */ @@ -273,18 +271,13 @@ #define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION 1 #define CONFIG_SPL_LIBDISK_SUPPORT #define CONFIG_SPL_FAT_SUPPORT -#if defined(CONFIG_OF_CONTROL) && defined(CONFIG_OF_SEPARATE) -# define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME "u-boot-dtb.img" -#else -# define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME "u-boot.img" -#endif +#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME "u-boot-dtb.img" #endif /* Disable dcache for SPL just for sure */ #ifdef CONFIG_SPL_BUILD #define CONFIG_SYS_DCACHE_OFF #undef CONFIG_FPGA -#undef CONFIG_OF_CONTROL #endif /* Address in RAM where the parameters must be copied by SPL. */ @@ -303,9 +296,7 @@ #define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_SPI_LOAD #define CONFIG_SPL_SPI_FLASH_SUPPORT -#define CONFIG_SPL_SPI_BUS 0 #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x100000 -#define CONFIG_SPL_SPI_CS 0 #endif /* for booting directly linux */ diff --git a/include/configs/zynq_microzed.h b/include/configs/zynq_microzed.h index b0328a2cc1..549a664ef5 100644 --- a/include/configs/zynq_microzed.h +++ b/include/configs/zynq_microzed.h @@ -19,7 +19,6 @@ #define CONFIG_SYS_NO_FLASH #define CONFIG_ZYNQ_SDHCI0 -#define CONFIG_DEFAULT_DEVICE_TREE zynq-microzed #include <configs/zynq-common.h> diff --git a/include/configs/zynq_zc70x.h b/include/configs/zynq_zc70x.h index 291a5fef51..b6590547a9 100644 --- a/include/configs/zynq_zc70x.h +++ b/include/configs/zynq_zc70x.h @@ -23,7 +23,6 @@ #define CONFIG_ZYNQ_I2C0 #define CONFIG_ZYNQ_EEPROM #define CONFIG_ZYNQ_BOOT_FREEBSD -#define CONFIG_DEFAULT_DEVICE_TREE zynq-zc702 #include <configs/zynq-common.h> diff --git a/include/configs/zynq_zc770.h b/include/configs/zynq_zc770.h index 8aa96e7121..16b904743f 100644 --- a/include/configs/zynq_zc770.h +++ b/include/configs/zynq_zc770.h @@ -20,18 +20,15 @@ # define CONFIG_ZYNQ_GEM_PHY_ADDR0 7 # define CONFIG_ZYNQ_SDHCI0 # define CONFIG_ZYNQ_SPI -# define CONFIG_DEFAULT_DEVICE_TREE zynq-zc770-xm010 #elif defined(CONFIG_ZC770_XM012) # define CONFIG_ZYNQ_SERIAL_UART1 # undef CONFIG_SYS_NO_FLASH -# define CONFIG_DEFAULT_DEVICE_TREE zynq-zc770-xm012 #elif defined(CONFIG_ZC770_XM013) # define CONFIG_ZYNQ_SERIAL_UART0 # define CONFIG_ZYNQ_GEM1 # define CONFIG_ZYNQ_GEM_PHY_ADDR1 7 -# define CONFIG_DEFAULT_DEVICE_TREE zynq-zc770-xm013 #else # define CONFIG_ZYNQ_SERIAL_UART0 diff --git a/include/configs/zynq_zed.h b/include/configs/zynq_zed.h index ce17d4060c..946de953e4 100644 --- a/include/configs/zynq_zed.h +++ b/include/configs/zynq_zed.h @@ -21,7 +21,6 @@ #define CONFIG_ZYNQ_USB #define CONFIG_ZYNQ_SDHCI0 #define CONFIG_ZYNQ_BOOT_FREEBSD -#define CONFIG_DEFAULT_DEVICE_TREE zynq-zed #include <configs/zynq-common.h> |