diff options
Diffstat (limited to 'include/configs')
| -rw-r--r-- | include/configs/M5373EVB.h | 10 | ||||
| -rw-r--r-- | include/configs/MPC8308RDB.h | 31 | ||||
| -rw-r--r-- | include/configs/apollon.h | 261 | ||||
| -rw-r--r-- | include/configs/atngw100mkii.h | 209 | ||||
| -rw-r--r-- | include/configs/flea3.h | 1 | ||||
| -rw-r--r-- | include/configs/microblaze-generic.h | 12 | ||||
| -rw-r--r-- | include/configs/mx35pdk.h | 1 | ||||
| -rw-r--r-- | include/configs/qemu-mips.h | 7 | ||||
| -rw-r--r-- | include/configs/qi_lb60.h | 1 | ||||
| -rw-r--r-- | include/configs/trats.h | 49 | ||||
| -rw-r--r-- | include/configs/tx25.h | 1 |
11 files changed, 295 insertions, 288 deletions
diff --git a/include/configs/M5373EVB.h b/include/configs/M5373EVB.h index 0d09f0ec61..45d1064557 100644 --- a/include/configs/M5373EVB.h +++ b/include/configs/M5373EVB.h @@ -1,7 +1,7 @@ /* * Configuation settings for the Freescale MCF5373 FireEngine board. * - * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * Copyright (C) 2004-2007, 2012 Freescale Semiconductor, Inc. * TsiChung Liew (Tsi-Chung.Liew@freescale.com) * * See file CREDITS for list of people who contributed to this @@ -59,7 +59,7 @@ #define CONFIG_CMD_PING #define CONFIG_CMD_REGINFO -#ifdef NANDFLASH_SIZE +#ifdef CONFIG_NANDFLASH_SIZE # define CONFIG_CMD_NAND #endif @@ -208,7 +208,7 @@ # define CONFIG_SYS_FLASH_PROTECTION /* "Real" (hardware) sectors protection */ #endif -#ifdef NANDFLASH_SIZE +#ifdef CONFIG_NANDFLASH_SIZE # define CONFIG_SYS_MAX_NAND_DEVICE 1 # define CONFIG_SYS_NAND_BASE CONFIG_SYS_CS2_BASE # define CONFIG_SYS_NAND_SIZE 1 @@ -264,9 +264,9 @@ #define CONFIG_SYS_CS1_MASK 0x001f0001 #define CONFIG_SYS_CS1_CTRL 0x002A3780 -#ifdef NANDFLASH_SIZE +#ifdef CONFIG_NANDFLASH_SIZE #define CONFIG_SYS_CS2_BASE 0x20000000 -#define CONFIG_SYS_CS2_MASK ((NANDFLASH_SIZE << 20) | 1) +#define CONFIG_SYS_CS2_MASK ((CONFIG_NANDFLASH_SIZE << 20) | 1) #define CONFIG_SYS_CS2_CTRL 0x00001f60 #endif diff --git a/include/configs/MPC8308RDB.h b/include/configs/MPC8308RDB.h index 7f2761c539..2d48dde808 100644 --- a/include/configs/MPC8308RDB.h +++ b/include/configs/MPC8308RDB.h @@ -37,6 +37,24 @@ #define CONFIG_MISC_INIT_R +/* new uImage format support */ +#define CONFIG_FIT 1 +#define CONFIG_FIT_VERBOSE 1 + +#define CONFIG_MMC 1 + +#ifdef CONFIG_MMC +#define CONFIG_FSL_ESDHC +#define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC83xx_ESDHC_ADDR +#define CONFIG_SYS_FSL_ERRATUM_ESDHC111 +#define CONFIG_SYS_FSL_ESDHC_USE_PIO + +#define CONFIG_CMD_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_CMD_FAT +#define CONFIG_DOS_PARTITION +#endif + /* * On-board devices * @@ -340,6 +358,19 @@ #define CONFIG_SYS_I2C_OFFSET 0x3000 #define CONFIG_SYS_I2C2_OFFSET 0x3100 +/* + * SPI on header J8 + * + * WARNING: enabling this will break TSEC2 (connected to the Vitesse switch) + * due to a pinmux conflict between GPIO9 (SPI chip select )and the TSEC2 pins. + */ +#ifdef CONFIG_MPC8XXX_SPI +#define CONFIG_CMD_SPI +#define CONFIG_USE_SPIFLASH +#define CONFIG_SPI_FLASH +#define CONFIG_SPI_FLASH_SPANSION +#define CONFIG_CMD_SF +#endif /* * Board info - revision and where boot from diff --git a/include/configs/apollon.h b/include/configs/apollon.h deleted file mode 100644 index b8ca8a849f..0000000000 --- a/include/configs/apollon.h +++ /dev/null @@ -1,261 +0,0 @@ -/* - * (C) Copyright 2005-2008 - * Samsung Electronics, - * Kyungmin Park <kyungmin.park@samsung.com> - * - * Configuration settings for the 2420 Samsung Apollon board. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - */ -#define CONFIG_ARM1136 1 /* This is an arm1136 CPU core */ -#define CONFIG_OMAP 1 /* in a TI OMAP core */ -#define CONFIG_OMAP2420 1 /* which is in a 2420 */ -#define CONFIG_OMAP2420_APOLLON 1 -#define CONFIG_APOLLON 1 -#define CONFIG_APOLLON_PLUS 1 /* If you have apollon plus 1.x */ - -#define CONFIG_ONENAND_U_BOOT y - -/* Clock config to target*/ -#define PRCM_CONFIG_I 1 -/* #define PRCM_CONFIG_II 1 */ - -/* Boot method */ -/* uncomment if you use NOR boot */ -/* #define CONFIG_SYS_NOR_BOOT 1 */ - -/* uncomment if you use NOR on CS3 */ -/* #define CONFIG_SYS_USE_NOR 1 */ - -#ifdef CONFIG_SYS_NOR_BOOT -#undef CONFIG_SYS_USE_NOR -#define CONFIG_SYS_USE_NOR 1 -#endif - -/* uncommnet if you want to use UBI */ -#define CONFIG_SYS_USE_UBI - -#include <asm/arch/omap2420.h> /* get chip and board defs */ - -#define V_SCLK 12000000 - -/* input clock of PLL */ -/* the OMAP2420 H4 has 12MHz, 13MHz, or 19.2Mhz crystal input */ -#define CONFIG_SYS_CLK_FREQ V_SCLK - -#define CONFIG_MISC_INIT_R - -#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS 1 -#define CONFIG_INITRD_TAG 1 -#define CONFIG_REVISION_TAG 1 - -/* - * Size of malloc() pool - */ -#define CONFIG_ENV_SIZE SZ_128K /* Total Size of Environment Sector */ -#define CONFIG_ENV_SIZE_FLEX SZ_256K -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + SZ_1M) - -/* - * Hardware drivers - */ - -/* - * SMC91c96 Etherent - */ -#define CONFIG_LAN91C96 -#define CONFIG_LAN91C96_BASE (APOLLON_CS1_BASE+0x300) -#define CONFIG_LAN91C96_EXT_PHY - -/* - * NS16550 Configuration - */ -#define V_NS16550_CLK (48000000) /* 48MHz (APLL96/2) */ - -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE (-4) -#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK /* 3MHz (1.5MHz*2) */ -#define CONFIG_SYS_NS16550_COM1 OMAP2420_UART1 - -/* - * select serial console configuration - */ -#define CONFIG_SERIAL1 1 /* UART1 on H4 */ - -/* allow to overwrite serial and ethaddr */ -#define CONFIG_ENV_OVERWRITE -#define CONFIG_CONS_INDEX 1 -#define CONFIG_BAUDRATE 115200 - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_DIAG -#define CONFIG_CMD_ONENAND - -#ifdef CONFIG_SYS_USE_UBI -#define CONFIG_CMD_JFFS2 -#define CONFIG_CMD_UBI -#define CONFIG_RBTREE -#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ -#define CONFIG_MTD_PARTITIONS -#endif - -#undef CONFIG_CMD_SOURCE - -#ifndef CONFIG_SYS_USE_NOR -# undef CONFIG_CMD_FLASH -# undef CONFIG_CMD_IMLS -#endif - -#define CONFIG_BOOTP_MASK CONFIG_BOOTP_DEFAULT - -#define CONFIG_BOOTDELAY 1 - -#define CONFIG_NETMASK 255.255.255.0 -#define CONFIG_IPADDR 192.168.116.25 -#define CONFIG_SERVERIP 192.168.116.1 -#define CONFIG_BOOTFILE "uImage" -#define CONFIG_ETHADDR 00:0E:99:00:24:20 - -#ifdef CONFIG_APOLLON_PLUS -#define CONFIG_SYS_MEM "mem=64M" -#else -#define CONFIG_SYS_MEM "mem=128" -#endif - -#ifdef CONFIG_SYS_USE_UBI -#define CONFIG_SYS_UBI "ubi.mtd=4" -#else -#define CONFIG_SYS_UBI "" -#endif - -#define CONFIG_BOOTARGS "root=/dev/nfs rw " CONFIG_SYS_MEM \ - " console=ttyS0,115200n8" \ - " ip=192.168.116.25:192.168.116.1:192.168.116.1:255.255.255.0:" \ - "apollon:eth0:off nfsroot=/tftpboot/nfsroot profile=2 " \ - CONFIG_SYS_UBI - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "Image=tftp 0x80008000 Image; go 0x80008000\0" \ - "zImage=tftp 0x80180000 zImage; go 0x80180000\0" \ - "uImage=tftp 0x80180000 uImage; bootm 0x80180000\0" \ - "uboot=tftp 0x80008000 u-boot.bin; go 0x80008000\0" \ - "xloader=tftp 0x80180000 x-load.bin; " \ - " cp.w 0x80180000 0x00000400 0x1000; go 0x00000400\0" \ - "syncmode50=mw.w 0x1e442 0xc0c4; mw 0x6800a060 0xe30d1201\0" \ - "syncmode=mw.w 0x1e442 0xe0f4; mw 0x6800a060 0xe30d1201\0" \ - "norboot=cp32 0x18040000 0x80008000 0x200000; go 0x80008000\0" \ - "oneboot=onenand read 0x80008000 0x40000 0x200000; go 0x80008000\0" \ - "onesyncboot=run syncmode oneboot\0" \ - "updateb=tftp 0x80180000 u-boot-onenand.bin; " \ - " onenand erase 0x0 0x20000; onenand write 0x80180000 0x0 0x20000\0" \ - "ubi=setenv bootargs ${bootargs} ubi.mtd=4 ${mtdparts}; run uImage\0" \ - "bootcmd=run uboot\0" - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "Apollon # " -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -/* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -/* memtest works on */ -#define CONFIG_SYS_MEMTEST_START (OMAP2420_SDRC_CS0) -#define CONFIG_SYS_MEMTEST_END (OMAP2420_SDRC_CS0+SZ_31M) - -/* default load address */ -#define CONFIG_SYS_LOAD_ADDR (OMAP2420_SDRC_CS0) - -/* The 2420 has 12 GP timers, they can be driven by the SysClk (12/13/19.2) - * or by 32KHz clk, or from external sig. This rate is divided by a local - * divisor. - */ -#define CONFIG_SYS_TIMERBASE OMAP2420_GPT2 -#define CONFIG_SYS_PTV 7 /* 2^(PTV+1) */ -#define CONFIG_SYS_HZ ((CONFIG_SYS_CLK_FREQ)/(2 << CONFIG_SYS_PTV)) - -/*----------------------------------------------------------------------- - * Physical Memory Map - */ -#define CONFIG_NR_DRAM_BANKS 1 /* CS1 may or may not be populated */ -#define PHYS_SDRAM_1 OMAP2420_SDRC_CS0 -#define PHYS_SDRAM_1_SIZE SZ_128M -#define PHYS_SDRAM_2 OMAP2420_SDRC_CS1 - -/*----------------------------------------------------------------------- - * FLASH and environment organization - */ -#ifdef CONFIG_SYS_USE_NOR -/* OneNAND boot, NOR has CS3, But NOR has CS0 when NOR boot */ -# define CONFIG_SYS_FLASH_BASE 0x18000000 -# define CONFIG_SYS_MAX_FLASH_BANKS 1 -# define CONFIG_SYS_MAX_FLASH_SECT 1024 -/*----------------------------------------------------------------------- - * CFI FLASH driver setup - */ -/* Flash memory is CFI compliant */ -# define CONFIG_SYS_FLASH_CFI 1 -# define CONFIG_FLASH_CFI_DRIVER 1 /* Use drivers/cfi_flash.c */ -/* Use buffered writes (~10x faster) */ -/* #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 */ -/* Use h/w sector protection*/ -# define CONFIG_SYS_FLASH_PROTECTION 1 - -#else /* !CONFIG_SYS_USE_NOR */ -# define CONFIG_SYS_NO_FLASH 1 -#endif /* CONFIG_SYS_USE_NOR */ - -/* OneNAND boot, OneNAND has CS0, NOR boot ONeNAND has CS2 */ -#define CONFIG_SYS_ONENAND_BASE 0x00000000 -#define CONFIG_SYS_MONITOR_LEN SZ_256K /* U-Boot image size */ -#define CONFIG_ENV_IS_IN_ONENAND 1 -#define CONFIG_ENV_ADDR 0x00020000 -#define CONFIG_ENV_ADDR_FLEX 0x00040000 - -#ifdef CONFIG_SYS_USE_UBI -#define CONFIG_CMD_MTDPARTS -#define MTDIDS_DEFAULT "onenand0=onenand" -#define MTDPARTS_DEFAULT "mtdparts=onenand:128k(bootloader)," \ - "128k(params)," \ - "2m(kernel)," \ - "16m(rootfs)," \ - "32m(fs)," \ - "-(ubifs)" -#endif - -#define PHYS_SRAM 0x4020F800 -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_SP_ADDR PHYS_SRAM - -#endif /* __CONFIG_H */ diff --git a/include/configs/atngw100mkii.h b/include/configs/atngw100mkii.h new file mode 100644 index 0000000000..f85374f882 --- /dev/null +++ b/include/configs/atngw100mkii.h @@ -0,0 +1,209 @@ +/* + * Copyright (C) 2006 Atmel Corporation + * + * Copyright (C) 2012 Andreas Bießmann <andreas.devel@googlemail.com> + * + * Configuration settings for the AVR32 Network Gateway + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef __CONFIG_H +#define __CONFIG_H + +#include <asm/arch/hardware.h> + +#define CONFIG_AVR32 +#define CONFIG_AT32AP +#define CONFIG_AT32AP7000 +#define CONFIG_ATNGW100MKII + +/* + * Timer clock frequency. We're using the CPU-internal COUNT register + * for this, so this is equivalent to the CPU core clock frequency + */ +#define CONFIG_SYS_HZ 1000 + +/* + * Set up the PLL to run at 140 MHz, the CPU to run at the PLL + * frequency, the HSB and PBB busses to run at 1/2 the PLL frequency + * and the PBA bus to run at 1/4 the PLL frequency. + */ +#define CONFIG_PLL +#define CONFIG_SYS_POWER_MANAGER +#define CONFIG_SYS_OSC0_HZ 20000000 +#define CONFIG_SYS_PLL0_DIV 1 +#define CONFIG_SYS_PLL0_MUL 7 +#define CONFIG_SYS_PLL0_SUPPRESS_CYCLES 16 +/* + * Set the CPU running at: + * PLL / (2^CONFIG_SYS_CLKDIV_CPU) = CPU MHz + */ +#define CONFIG_SYS_CLKDIV_CPU 0 +/* + * Set the HSB running at: + * PLL / (2^CONFIG_SYS_CLKDIV_HSB) = HSB MHz + */ +#define CONFIG_SYS_CLKDIV_HSB 1 +/* + * Set the PBA running at: + * PLL / (2^CONFIG_SYS_CLKDIV_PBA) = PBA MHz + */ +#define CONFIG_SYS_CLKDIV_PBA 2 +/* + * Set the PBB running at: + * PLL / (2^CONFIG_SYS_CLKDIV_PBB) = PBB MHz + */ +#define CONFIG_SYS_CLKDIV_PBB 1 + +/* Reserve VM regions for NOR flash, NAND flash and SDRAM */ +#define CONFIG_SYS_NR_VM_REGIONS 3 + +/* + * The PLLOPT register controls the PLL like this: + * icp = PLLOPT<2> + * ivco = PLLOPT<1:0> + * + * We want icp=1 (default) and ivco=0 (80-160 MHz) or ivco=2 (150-240MHz). + */ +#define CONFIG_SYS_PLL0_OPT 0x04 + +#define CONFIG_USART_BASE ATMEL_BASE_USART1 +#define CONFIG_USART_ID 1 + +/* User serviceable stuff */ +#define CONFIG_DOS_PARTITION + +#define CONFIG_CMDLINE_TAG +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_INITRD_TAG + +#define CONFIG_STACKSIZE (2048) + +#define CONFIG_BAUDRATE 115200 +#define CONFIG_BOOTARGS \ + "root=mtd:main rootfstype=jffs2" +#define CONFIG_BOOTCOMMAND \ + "fsload 0x10400000 /uImage; bootm" + +/* + * Only interrupt autoboot if <space> is pressed. Otherwise, garbage + * data on the serial line may interrupt the boot sequence. + */ +#define CONFIG_BOOTDELAY 1 +#define CONFIG_AUTOBOOT +#define CONFIG_AUTOBOOT_KEYED +#define CONFIG_AUTOBOOT_PROMPT \ + "Press SPACE to abort autoboot in %d seconds\n", bootdelay +#define CONFIG_AUTOBOOT_DELAY_STR "d" +#define CONFIG_AUTOBOOT_STOP_STR " " + +/* + * After booting the board for the first time, new ethernet addresses + * should be generated and assigned to the environment variables + * "ethaddr" and "eth1addr". This is normally done during production. + */ +#define CONFIG_OVERWRITE_ETHADDR_ONCE +#define CONFIG_NET_MULTI + +/* + * BOOTP/DHCP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FAT +#define CONFIG_CMD_JFFS2 +#define CONFIG_CMD_MMC +#define CONFIG_CMD_SF +#define CONFIG_CMD_SPI +#define CONFIG_CMD_MII + +#undef CONFIG_CMD_FPGA +#undef CONFIG_CMD_SETGETDCR +#undef CONFIG_CMD_XIMG + +#define CONFIG_ATMEL_USART +#define CONFIG_MACB +#define CONFIG_PORTMUX_PIO +#define CONFIG_SYS_NR_PIOS 5 +#define CONFIG_SYS_HSDRAMC +#define CONFIG_MMC +#define CONFIG_GENERIC_ATMEL_MCI +#define CONFIG_GENERIC_MMC +#define CONFIG_SYS_MMC_MAX_BLK_COUNT 1 +#define CONFIG_ATMEL_SPI + +#define CONFIG_SPI_FLASH +#define CONFIG_SPI_FLASH_ATMEL + +#define CONFIG_SYS_DCACHE_LINESZ 32 +#define CONFIG_SYS_ICACHE_LINESZ 32 + +#define CONFIG_NR_DRAM_BANKS 1 + +#define CONFIG_SYS_FLASH_CFI +#define CONFIG_FLASH_CFI_DRIVER +#define CONFIG_SYS_FLASH_PROTECTION + +#define CONFIG_SYS_FLASH_BASE 0x00000000 +#define CONFIG_SYS_FLASH_SIZE 0x800000 +#define CONFIG_SYS_MAX_FLASH_BANKS 1 +#define CONFIG_SYS_MAX_FLASH_SECT 135 + +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE + +#define CONFIG_SYS_INTRAM_BASE INTERNAL_SRAM_BASE +#define CONFIG_SYS_INTRAM_SIZE INTERNAL_SRAM_SIZE +#define CONFIG_SYS_SDRAM_BASE EBI_SDRAM_BASE + +#define CONFIG_ENV_IS_IN_FLASH +#define CONFIG_ENV_SIZE 65536 +#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_FLASH_SIZE - CONFIG_ENV_SIZE) + +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INTRAM_BASE + CONFIG_SYS_INTRAM_SIZE) + +#define CONFIG_SYS_MALLOC_LEN (256*1024) +#define CONFIG_SYS_DMA_ALLOC_LEN (16384) + +/* Allow 4MB for the kernel run-time image */ +#define CONFIG_SYS_LOAD_ADDR (EBI_SDRAM_BASE + 0x00400000) +#define CONFIG_SYS_BOOTPARAMS_LEN (16 * 1024) + +/* Other configuration settings that shouldn't have to change all that often */ +#define CONFIG_SYS_PROMPT "U-Boot> " +#define CONFIG_SYS_CBSIZE 256 +#define CONFIG_SYS_MAXARGS 16 +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_LONGHELP + +#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE +#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x1f00000) + +#define CONFIG_MTD_DEVICE +#define CONFIG_MTD_PARTITIONS + +#endif /* __CONFIG_H */ diff --git a/include/configs/flea3.h b/include/configs/flea3.h index 16f2d2ac48..46171b98f0 100644 --- a/include/configs/flea3.h +++ b/include/configs/flea3.h @@ -212,7 +212,6 @@ * NAND FLASH driver setup */ #define CONFIG_NAND_MXC -#define CONFIG_NAND_MXC_V1_1 #define CONFIG_MXC_NAND_REGS_BASE (NFC_BASE_ADDR) #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_SYS_NAND_BASE (NFC_BASE_ADDR) diff --git a/include/configs/microblaze-generic.h b/include/configs/microblaze-generic.h index 1266cf72fa..721cd906ad 100644 --- a/include/configs/microblaze-generic.h +++ b/include/configs/microblaze-generic.h @@ -115,19 +115,11 @@ #endif /* timer */ -#ifdef XILINX_TIMER_BASEADDR -# if (XILINX_TIMER_IRQ != -1) -# define CONFIG_SYS_TIMER_0 1 +#if defined(XILINX_TIMER_BASEADDR) && defined(XILINX_TIMER_IRQ) # define CONFIG_SYS_TIMER_0_ADDR XILINX_TIMER_BASEADDR # define CONFIG_SYS_TIMER_0_IRQ XILINX_TIMER_IRQ -# define FREQUENCE XILINX_CLOCK_FREQ -# define CONFIG_SYS_TIMER_0_PRELOAD ( FREQUENCE/1000 ) -# endif -#elif XILINX_CLOCK_FREQ -# define CONFIG_XILINX_CLOCK_FREQ XILINX_CLOCK_FREQ -#else -# error BAD CLOCK FREQ #endif + /* FSL */ /* #define CONFIG_SYS_FSL_2 */ /* #define FSL_INTR_2 1 */ diff --git a/include/configs/mx35pdk.h b/include/configs/mx35pdk.h index 38b1546584..69bd654b9f 100644 --- a/include/configs/mx35pdk.h +++ b/include/configs/mx35pdk.h @@ -236,7 +236,6 @@ * NAND FLASH driver setup */ #define CONFIG_NAND_MXC -#define CONFIG_NAND_MXC_V1_1 #define CONFIG_MXC_NAND_REGS_BASE (NFC_BASE_ADDR) #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_SYS_NAND_BASE (NFC_BASE_ADDR) diff --git a/include/configs/qemu-mips.h b/include/configs/qemu-mips.h index 306c17336e..b8b970504f 100644 --- a/include/configs/qemu-mips.h +++ b/include/configs/qemu-mips.h @@ -100,7 +100,12 @@ */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "qemu-mips # " /* Monitor Command Prompt */ +/* Monitor Command Prompt */ +#if defined(CONFIG_SYS_LITTLE_ENDIAN) +#define CONFIG_SYS_PROMPT "qemu-mipsel # " +#else +#define CONFIG_SYS_PROMPT "qemu-mips # " +#endif #define CONFIG_AUTO_COMPLETE #define CONFIG_CMDLINE_EDITING diff --git a/include/configs/qi_lb60.h b/include/configs/qi_lb60.h index a3fc465e70..4bb5bbc697 100644 --- a/include/configs/qi_lb60.h +++ b/include/configs/qi_lb60.h @@ -11,6 +11,7 @@ #define __CONFIG_QI_LB60_H #define CONFIG_MIPS32 /* MIPS32 CPU core */ +#define CONFIG_SYS_LITTLE_ENDIAN #define CONFIG_JZSOC /* Jz SoC */ #define CONFIG_JZ4740 /* Jz4740 SoC */ #define CONFIG_NAND_JZ4740 diff --git a/include/configs/trats.h b/include/configs/trats.h index 8a0deea434..b3b5a3d5e3 100644 --- a/include/configs/trats.h +++ b/include/configs/trats.h @@ -78,6 +78,7 @@ #define CONFIG_MMC #define CONFIG_S5P_SDHCI #define CONFIG_SDHCI +#define CONFIG_MMC_SDMA /* PWM */ #define CONFIG_PWM @@ -97,6 +98,21 @@ #undef CONFIG_CMD_ONENAND #undef CONFIG_CMD_MTDPARTS #define CONFIG_CMD_MMC +#define CONFIG_CMD_DFU + +/* FAT */ +#define CONFIG_CMD_FAT +#define CONFIG_FAT_WRITE + +/* USB Composite download gadget - g_dnl */ +#define CONFIG_USBDOWNLOAD_GADGET +#define CONFIG_DFU_FUNCTION +#define CONFIG_DFU_MMC + +/* USB Samsung's IDs */ +#define CONFIG_G_DNL_VENDOR_NUM 0x04E8 +#define CONFIG_G_DNL_PRODUCT_NUM 0x6601 +#define CONFIG_G_DNL_MANUFACTURER "Samsung" #define CONFIG_BOOTDELAY 1 #define CONFIG_ZERO_BOOTDELAY_CHECK @@ -107,6 +123,11 @@ #define CONFIG_BOOTBLOCK "10" #define CONFIG_ENV_COMMON_BOOT "${console} ${meminfo}" +#define CONFIG_DFU_ALT \ + "dfu_alt_info=" \ + "u-boot mmc 80 400;" \ + "uImage fat 0 2\0" \ + #define CONFIG_ENV_OVERWRITE #define CONFIG_SYS_CONSOLE_INFO_QUIET #define CONFIG_SYS_CONSOLE_IS_IN_ENV @@ -150,7 +171,8 @@ "mmcdev=0\0" \ "mmcbootpart=2\0" \ "mmcrootpart=3\0" \ - "opts=always_resume=1" + "opts=always_resume=1\0" \ + CONFIG_DFU_ALT /* Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ @@ -190,18 +212,28 @@ #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_CACHELINE_SIZE 32 -#include <asm/arch/gpio.h> -/* - * I2C Settings - */ -#define CONFIG_SOFT_I2C_GPIO_SCL exynos4_gpio_part1_get_nr(b, 7) -#define CONFIG_SOFT_I2C_GPIO_SDA exynos4_gpio_part1_get_nr(b, 6) #define CONFIG_SOFT_I2C #define CONFIG_SOFT_I2C_READ_REPEATED_START +#define CONFIG_SYS_I2C_INIT_BOARD #define CONFIG_SYS_I2C_SPEED 50000 #define CONFIG_I2C_MULTI_BUS -#define CONFIG_SYS_MAX_I2C_BUS 7 +#define CONFIG_SOFT_I2C_MULTI_BUS +#define CONFIG_SYS_MAX_I2C_BUS 15 + +#include <asm/arch/gpio.h> + +/* I2C PMIC */ +#define CONFIG_SOFT_I2C_I2C5_SCL exynos4_gpio_part1_get_nr(b, 7) +#define CONFIG_SOFT_I2C_I2C5_SDA exynos4_gpio_part1_get_nr(b, 6) + +/* I2C FG */ +#define CONFIG_SOFT_I2C_I2C9_SCL exynos4_gpio_part2_get_nr(y4, 1) +#define CONFIG_SOFT_I2C_I2C9_SDA exynos4_gpio_part2_get_nr(y4, 0) + +#define CONFIG_SOFT_I2C_GPIO_SCL get_multi_scl_pin() +#define CONFIG_SOFT_I2C_GPIO_SDA get_multi_sda_pin() +#define I2C_INIT multi_i2c_init() #define CONFIG_PMIC #define CONFIG_PMIC_I2C @@ -210,6 +242,7 @@ #define CONFIG_USB_GADGET #define CONFIG_USB_GADGET_S3C_UDC_OTG #define CONFIG_USB_GADGET_DUALSPEED +#define CONFIG_USB_GADGET_VBUS_DRAW 2 /* LCD */ #define CONFIG_EXYNOS_FB diff --git a/include/configs/tx25.h b/include/configs/tx25.h index c8a49bba14..71b1d326de 100644 --- a/include/configs/tx25.h +++ b/include/configs/tx25.h @@ -107,7 +107,6 @@ /* NAND */ #define CONFIG_NAND_MXC -#define CONFIG_NAND_MXC_V1_1 #define CONFIG_MXC_NAND_REGS_BASE (0xBB000000) #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_SYS_NAND_BASE (0xBB000000) |