summaryrefslogtreecommitdiff
path: root/include/configs
diff options
context:
space:
mode:
Diffstat (limited to 'include/configs')
-rw-r--r--include/configs/bur_am335x_common.h2
-rw-r--r--include/configs/kwb.h2
-rw-r--r--include/configs/sun4i.h1
-rw-r--r--include/configs/sun5i.h3
-rw-r--r--include/configs/sun6i.h7
-rw-r--r--include/configs/sun7i.h2
-rw-r--r--include/configs/sun8i.h12
-rw-r--r--include/configs/sun9i.h21
-rw-r--r--include/configs/sunxi-common.h94
-rw-r--r--include/configs/tseries.h2
-rw-r--r--include/configs/uniphier.h6
11 files changed, 117 insertions, 35 deletions
diff --git a/include/configs/bur_am335x_common.h b/include/configs/bur_am335x_common.h
index 2508c16651..99c142ae02 100644
--- a/include/configs/bur_am335x_common.h
+++ b/include/configs/bur_am335x_common.h
@@ -3,7 +3,7 @@
*
* common parts used by B&R AM335x based boards
*
- * Copyright (C) 2013 Hannes Petermaier <oe5hpm@oevsv.at> -
+ * Copyright (C) 2013 Hannes Schmelzer <oe5hpm@oevsv.at> -
* Bernecker & Rainer Industrieelektronik GmbH - http://www.br-automation.com
*
* SPDX-License-Identifier: GPL-2.0+
diff --git a/include/configs/kwb.h b/include/configs/kwb.h
index d1c745e6ab..acff5b9f89 100644
--- a/include/configs/kwb.h
+++ b/include/configs/kwb.h
@@ -3,7 +3,7 @@
*
* specific parts for B&R KWB Motherboard
*
- * Copyright (C) 2013 Hannes Petermaier <oe5hpm@oevsv.at> -
+ * Copyright (C) 2013 Hannes Schmelzer <oe5hpm@oevsv.at> -
* Bernecker & Rainer Industrieelektronik GmbH - http://www.br-automation.com
*
* SPDX-License-Identifier: GPL-2.0+
diff --git a/include/configs/sun4i.h b/include/configs/sun4i.h
index ea079eb5f7..a3c9408518 100644
--- a/include/configs/sun4i.h
+++ b/include/configs/sun4i.h
@@ -18,6 +18,7 @@
#endif
#define CONFIG_SUNXI_USB_PHYS 3
+#define CONFIG_NAND_SUNXI_GPC_PORTS {16, 17, 18, 19, 20, 21, 22, 24}
/*
* Include common sunxi configuration where most the settings are
diff --git a/include/configs/sun5i.h b/include/configs/sun5i.h
index d257659903..8e13df58bd 100644
--- a/include/configs/sun5i.h
+++ b/include/configs/sun5i.h
@@ -19,6 +19,9 @@
#define CONFIG_SUNXI_USB_PHYS 2
+/* \todo A13 only defines port 19, whereas A10s requires each of these */
+#define CONFIG_NAND_SUNXI_GPC_PORTS {16, 17, 18, 19}
+
/*
* Include common sunxi configuration where most the settings are
*/
diff --git a/include/configs/sun6i.h b/include/configs/sun6i.h
index 2c24bd2312..a0ebc7e977 100644
--- a/include/configs/sun6i.h
+++ b/include/configs/sun6i.h
@@ -22,6 +22,13 @@
#define CONFIG_SUNXI_USB_PHYS 3
+#define CONFIG_ARMV7_PSCI 1
+#define CONFIG_ARMV7_PSCI_NR_CPUS 4
+#define CONFIG_ARMV7_SECURE_BASE SUNXI_SRAM_B_BASE
+#define CONFIG_TIMER_CLK_FREQ 24000000
+
+#define CONFIG_NAND_SUNXI_GPC_PORTS {24, 25, 26}
+
/*
* Include common sunxi configuration where most the settings are
*/
diff --git a/include/configs/sun7i.h b/include/configs/sun7i.h
index 56101a9ffc..3d26ce8d4a 100644
--- a/include/configs/sun7i.h
+++ b/include/configs/sun7i.h
@@ -24,6 +24,8 @@
#define CONFIG_ARMV7_SECURE_BASE SUNXI_SRAM_B_BASE
#define CONFIG_TIMER_CLK_FREQ 24000000
+#define CONFIG_NAND_SUNXI_GPC_PORTS {16, 17, 18, 19, 20, 21, 22, 24}
+
/*
* Include common sunxi configuration where most the settings are
*/
diff --git a/include/configs/sun8i.h b/include/configs/sun8i.h
index 7111c635c1..fe8c511448 100644
--- a/include/configs/sun8i.h
+++ b/include/configs/sun8i.h
@@ -20,6 +20,18 @@
#define CONFIG_SUNXI_USB_PHYS 2
+#define CONFIG_ARMV7_PSCI 1
+#if defined(CONFIG_MACH_SUN8I_A23)
+#define CONFIG_ARMV7_PSCI_NR_CPUS 2
+#define CONFIG_NAND_SUNXI_GPC_PORTS {16, 17, 18}
+#elif defined(CONFIG_MACH_SUN8I_A33)
+#define CONFIG_ARMV7_PSCI_NR_CPUS 4
+#define CONFIG_NAND_SUNXI_GPC_PORTS {16}
+#else
+#error Unsupported sun8i variant
+#endif
+#define CONFIG_TIMER_CLK_FREQ 24000000
+
/*
* Include common sunxi configuration where most the settings are
*/
diff --git a/include/configs/sun9i.h b/include/configs/sun9i.h
new file mode 100644
index 0000000000..cd9e08d8b1
--- /dev/null
+++ b/include/configs/sun9i.h
@@ -0,0 +1,21 @@
+/*
+ * (C) Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * Configuration settings for the Allwinner A80 (sun9i) CPU
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * A80 specific configuration
+ */
+
+/*
+ * Include common sunxi configuration where most the settings are
+ */
+#include <configs/sunxi-common.h>
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h
index a0e21ea3bf..07db736d31 100644
--- a/include/configs/sunxi-common.h
+++ b/include/configs/sunxi-common.h
@@ -13,6 +13,8 @@
#ifndef _SUNXI_COMMON_CONFIG_H
#define _SUNXI_COMMON_CONFIG_H
+#include <linux/stringify.h>
+
#ifdef CONFIG_OLD_SUNXI_KERNEL_COMPAT
/*
* The U-Boot workarounds bugs in the outdated buggy sunxi-3.4 kernels at the
@@ -39,8 +41,6 @@
#include <asm/arch/cpu.h> /* get chip and board defs */
-#define CONFIG_SYS_TEXT_BASE 0x4a000000
-
#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_DM_SERIAL)
# define CONFIG_DW_SERIAL
#endif
@@ -69,10 +69,48 @@
/* CPU */
#define CONFIG_SYS_CACHELINE_SIZE 64
-/* DRAM Base */
+/*
+ * The DRAM Base differs between some models. We cannot use macros for the
+ * CONFIG_FOO defines which contain the DRAM base address since they end
+ * up unexpanded in include/autoconf.mk .
+ *
+ * So we have to have this #ifdef #else #endif block for these.
+ */
+#ifdef CONFIG_MACH_SUN9I
+#define SDRAM_OFFSET(x) 0x2##x
+#define CONFIG_SYS_SDRAM_BASE 0x20000000
+#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* default load address */
+#define CONFIG_SYS_TEXT_BASE 0x2a000000
+#define CONFIG_PRE_CON_BUF_ADDR 0x2f000000
+#define CONFIG_SYS_SPL_MALLOC_START 0x2ff00000
+#define CONFIG_SPL_BSS_START_ADDR 0x2ff80000
+#else
+#define SDRAM_OFFSET(x) 0x4##x
#define CONFIG_SYS_SDRAM_BASE 0x40000000
+#define CONFIG_SYS_LOAD_ADDR 0x42000000 /* default load address */
+#define CONFIG_SYS_TEXT_BASE 0x4a000000
+#define CONFIG_PRE_CON_BUF_ADDR 0x4f000000
+#define CONFIG_SYS_SPL_MALLOC_START 0x4ff00000
+#define CONFIG_SPL_BSS_START_ADDR 0x4ff80000
+#endif
+
+#define CONFIG_SPL_BSS_MAX_SIZE 0x00080000 /* 512 KiB */
+#define CONFIG_SYS_SPL_MALLOC_SIZE 0x00080000 /* 512 KiB */
+
+#ifdef CONFIG_MACH_SUN9I
+/*
+ * The A80's A1 sram starts at 0x00010000 rather then at 0x00000000 and is
+ * slightly bigger. Note that it is possible to map the first 32 KiB of the
+ * A1 at 0x00000000 like with older SoCs by writing 0x16aa0001 to the
+ * undocumented 0x008000e0 SYS_CTRL register. Where the 16aa is a key and
+ * the 1 actually activates the mapping of the first 32 KiB to 0x00000000.
+ */
+#define CONFIG_SYS_INIT_RAM_ADDR 0x10000
+#define CONFIG_SYS_INIT_RAM_SIZE 0x0a000 /* 40 KiB */
+#else
#define CONFIG_SYS_INIT_RAM_ADDR 0x0
#define CONFIG_SYS_INIT_RAM_SIZE 0x8000 /* 32 KiB */
+#endif
#define CONFIG_SYS_INIT_SP_OFFSET \
(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
@@ -109,8 +147,10 @@
#define CONFIG_CMD_MMC
#define CONFIG_MMC_SUNXI
#define CONFIG_MMC_SUNXI_SLOT 0
+#if !defined(CONFIG_SPL_NAND_SUPPORT)
#define CONFIG_ENV_IS_IN_MMC
#define CONFIG_SYS_MMC_ENV_DEV 0 /* first detected MMC controller */
+#endif /* CONFIG_SPL_NAND_SUPPORT */
#endif
/* 4MB of malloc() pool */
@@ -128,10 +168,8 @@
/* Boot Argument Buffer Size */
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
-#define CONFIG_SYS_LOAD_ADDR 0x42000000 /* default load address */
-
/* standalone support */
-#define CONFIG_STANDALONE_LOAD_ADDR 0x42000000
+#define CONFIG_STANDALONE_LOAD_ADDR CONFIG_SYS_LOAD_ADDR
/* baudrate */
#define CONFIG_BAUDRATE 115200
@@ -161,16 +199,6 @@
#define CONFIG_SPL_BOARD_LOAD_IMAGE
-#ifdef CONFIG_SPL_FEL
-
-#define CONFIG_SPL_TEXT_BASE 0x2000
-#define CONFIG_SPL_MAX_SIZE 0x4000 /* 16 KiB */
-
-#else /* CONFIG_SPL */
-
-#define CONFIG_SPL_BSS_START_ADDR 0x4ff80000
-#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KiB */
-
#define CONFIG_SPL_TEXT_BASE 0x20 /* sram start+header */
#define CONFIG_SPL_MAX_SIZE 0x5fe0 /* 24KB on sun4i/sun7i */
@@ -185,13 +213,9 @@
#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 80 /* 40KiB */
#define CONFIG_SPL_PAD_TO 32768 /* decimal for 'dd' */
-#endif /* CONFIG_SPL */
-
/* end of 32 KiB in sram */
#define LOW_LEVEL_SRAM_STACK 0x00008000 /* End of sram */
#define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK
-#define CONFIG_SYS_SPL_MALLOC_START 0x4ff00000
-#define CONFIG_SYS_SPL_MALLOC_SIZE 0x00080000 /* 512 KiB */
/* I2C */
#if defined CONFIG_AXP152_POWER || defined CONFIG_AXP209_POWER
@@ -332,6 +356,24 @@ extern int soft_i2c_gpio_scl;
#define CONFIG_ENV_IS_NOWHERE
#endif
+#ifdef CONFIG_SPL_NAND_SUPPORT
+#define CONFIG_NAND
+#define CONFIG_SYS_NAND_SELF_INIT
+#define CONFIG_NAND_SUNXI
+#define CONFIG_CMD_SPL_WRITE_SIZE 0x000400
+#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x008000
+
+/* \todo Make these parameterisable in kernel config ? */
+#define CONFIG_NAND_SUNXI_PAGE_SIZE 8192
+#define CONFIG_NAND_SUNXI_ECC_STEP 1024
+#define CONFIG_NAND_SUNXI_ECC_STRENGTH 40
+#define CONFIG_NAND_SUNXI_ADDR_CYCLES 5
+
+#ifndef CONFIG_NAND_SUNXI_GPC_PORTS
+#error "No NAND GPC ports defined, NAND unsupported"
+#endif
+#endif /* CONFIG_SPL_NAND_SUPPORT */
+
#define CONFIG_MISC_INIT_R
#define CONFIG_SYS_CONSOLE_IS_IN_ENV
@@ -341,8 +383,6 @@ extern int soft_i2c_gpio_scl;
/* Enable pre-console buffer to get complete log on the VGA console */
#define CONFIG_PRE_CONSOLE_BUFFER
#define CONFIG_PRE_CON_BUF_SZ 4096 /* Aprox 2 80*25 screens */
-/* Use the room between the end of bootm_size and the framebuffer */
-#define CONFIG_PRE_CON_BUF_ADDR 0x4f000000
/*
* 240M RAM (256M minimum minus space for the framebuffer),
@@ -351,11 +391,11 @@ extern int soft_i2c_gpio_scl;
*/
#define MEM_LAYOUT_ENV_SETTINGS \
"bootm_size=0xf000000\0" \
- "kernel_addr_r=0x42000000\0" \
- "fdt_addr_r=0x43000000\0" \
- "scriptaddr=0x43100000\0" \
- "pxefile_addr_r=0x43200000\0" \
- "ramdisk_addr_r=0x43300000\0"
+ "kernel_addr_r=" __stringify(SDRAM_OFFSET(2000000)) "\0" \
+ "fdt_addr_r=" __stringify(SDRAM_OFFSET(3000000)) "\0" \
+ "scriptaddr=" __stringify(SDRAM_OFFSET(3100000)) "\0" \
+ "pxefile_addr_r=" __stringify(SDRAM_OFFSET(3200000)) "\0" \
+ "ramdisk_addr_r=" __stringify(SDRAM_OFFSET(3300000)) "\0"
#ifdef CONFIG_MMC
#define BOOT_TARGET_DEVICES_MMC(func) func(MMC, mmc, 0)
diff --git a/include/configs/tseries.h b/include/configs/tseries.h
index 9218533388..f3f71f11a6 100644
--- a/include/configs/tseries.h
+++ b/include/configs/tseries.h
@@ -3,7 +3,7 @@
*
* specific parts for B&R T-Series Motherboard
*
- * Copyright (C) 2013 Hannes Petermaier <oe5hpm@oevsv.at> -
+ * Copyright (C) 2013 Hannes Schmelzer <oe5hpm@oevsv.at> -
* Bernecker & Rainer Industrieelektronik GmbH - http://www.br-automation.com
*
* SPDX-License-Identifier: GPL-2.0+
diff --git a/include/configs/uniphier.h b/include/configs/uniphier.h
index 331df6251a..8510472d95 100644
--- a/include/configs/uniphier.h
+++ b/include/configs/uniphier.h
@@ -1,7 +1,5 @@
/*
- * Copyright (C) 2012-2015 Panasonic Corporation
- * Copyright (C) 2015 Socionext Inc.
- * Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+ * Copyright (C) 2012-2015 Masahiro Yamada <yamada.masahiro@socionext.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
@@ -266,8 +264,6 @@
#define CONFIG_SYS_SDRAM_SIZE (CONFIG_SDRAM0_SIZE)
#endif
-#define CONFIG_SYS_TEXT_BASE 0x84000000
-
#if defined(CONFIG_MACH_PH1_LD4) || defined(CONFIG_MACH_PH1_SLD8)
#define CONFIG_SPL_TEXT_BASE 0x00040000
#endif
generated by cgit (git 2.34.1) at 2024-12-29 09:00:13 +0000