diff options
Diffstat (limited to 'include/configs')
-rw-r--r-- | include/configs/MPC8540ADS.h | 12 | ||||
-rw-r--r-- | include/configs/MPC8541CDS.h | 13 | ||||
-rw-r--r-- | include/configs/MPC8544DS.h | 119 | ||||
-rw-r--r-- | include/configs/MPC8548CDS.h | 103 | ||||
-rw-r--r-- | include/configs/MPC8555CDS.h | 13 | ||||
-rw-r--r-- | include/configs/MPC8560ADS.h | 14 | ||||
-rw-r--r-- | include/configs/MPC8568MDS.h | 39 |
7 files changed, 70 insertions, 243 deletions
diff --git a/include/configs/MPC8540ADS.h b/include/configs/MPC8540ADS.h index be603ac117..35e1d63066 100644 --- a/include/configs/MPC8540ADS.h +++ b/include/configs/MPC8540ADS.h @@ -298,13 +298,9 @@ #endif /* pass open firmware flat tree */ -#define CONFIG_OF_FLAT_TREE 1 -#define CONFIG_OF_BOARD_SETUP 1 - -#define OF_CPU "PowerPC,8540@0" -#define OF_SOC "soc8540@e0000000" -#define OF_TBCLK (bd->bi_busfreq / 8) -#define OF_STDOUT_PATH "/soc8540@e0000000/serial@4500" +#define CONFIG_OF_LIBFDT 1 +#define CONFIG_OF_BOARD_SETUP 1 +#define CONFIG_OF_STDOUT_VIA_ALIAS 1 #define CFG_64BIT_VSPRINTF 1 #define CFG_64BIT_STRTOUL 1 @@ -424,6 +420,7 @@ #define CONFIG_CMD_PING #define CONFIG_CMD_I2C +#define CONFIG_CMD_ELF #if defined(CONFIG_PCI) #define CONFIG_CMD_PCI @@ -441,6 +438,7 @@ * Miscellaneous configurable options */ #define CFG_LONGHELP /* undef to save memory */ +#define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CFG_LOAD_ADDR 0x2000000 /* default load address */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ diff --git a/include/configs/MPC8541CDS.h b/include/configs/MPC8541CDS.h index 8dda6651ef..d2e7237895 100644 --- a/include/configs/MPC8541CDS.h +++ b/include/configs/MPC8541CDS.h @@ -309,14 +309,9 @@ extern unsigned long get_clock_freq(void); #endif /* pass open firmware flat tree */ -#define CONFIG_OF_FLAT_TREE 1 -#define CONFIG_OF_BOARD_SETUP 1 - -#define OF_CPU "PowerPC,8541@0" -#define OF_SOC "soc8541@e0000000" -#define OF_TBCLK (bd->bi_busfreq / 8) -#define OF_STDOUT_PATH "/soc8541@e0000000/serial@4600" -#define OF_PCI "pci@e0008000" +#define CONFIG_OF_LIBFDT 1 +#define CONFIG_OF_BOARD_SETUP 1 +#define CONFIG_OF_STDOUT_VIA_ALIAS 1 /* * I2C @@ -422,6 +417,7 @@ extern unsigned long get_clock_freq(void); #define CONFIG_CMD_PING #define CONFIG_CMD_I2C #define CONFIG_CMD_MII +#define CONFIG_CMD_ELF #if defined(CONFIG_PCI) #define CONFIG_CMD_PCI @@ -434,6 +430,7 @@ extern unsigned long get_clock_freq(void); * Miscellaneous configurable options */ #define CFG_LONGHELP /* undef to save memory */ +#define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CFG_LOAD_ADDR 0x2000000 /* default load address */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) diff --git a/include/configs/MPC8544DS.h b/include/configs/MPC8544DS.h index 13e2a2c079..545a76cc62 100644 --- a/include/configs/MPC8544DS.h +++ b/include/configs/MPC8544DS.h @@ -40,6 +40,7 @@ #define CONFIG_PCIE2 1 /* PCIE controler 2 (slot 2) */ #define CONFIG_PCIE3 1 /* PCIE controler 3 (ULI bridge) */ #define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */ +#define CONFIG_FSL_PCIE_RESET 1 /* need PCIe reset errata */ #define CONFIG_TSEC_ENET /* tsec ethernet support */ #define CONFIG_ENV_OVERWRITE @@ -251,13 +252,9 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #endif /* pass open firmware flat tree */ -#define CONFIG_OF_FLAT_TREE 1 -#define CONFIG_OF_BOARD_SETUP 1 - -#define OF_CPU "PowerPC,8544@0" -#define OF_SOC "soc8544@e0000000" -#define OF_TBCLK (bd->bi_busfreq / 8) -#define OF_STDOUT_PATH "/soc8544@e0000000/serial@4500" +#define CONFIG_OF_LIBFDT 1 +#define CONFIG_OF_BOARD_SETUP 1 +#define CONFIG_OF_STDOUT_VIA_ALIAS 1 /* I2C */ #define CONFIG_FSL_I2C /* Use FSL common I2C driver */ @@ -410,6 +407,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_CMD_PING #define CONFIG_CMD_I2C #define CONFIG_CMD_MII +#define CONFIG_CMD_ELF #if defined(CONFIG_PCI) #define CONFIG_CMD_PCI @@ -426,6 +424,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); * Miscellaneous configurable options */ #define CFG_LONGHELP /* undef to save memory */ +#define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CFG_LOAD_ADDR 0x2000000 /* default load address */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) @@ -475,10 +474,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_ETHADDR 00:E0:0C:02:00:FD #define CONFIG_HAS_ETH1 #define CONFIG_ETH1ADDR 00:E0:0C:02:01:FD -#define CONFIG_HAS_ETH2 -#define CONFIG_ETH2ADDR 00:E0:0C:02:02:FD -#define CONFIG_HAS_ETH3 -#define CONFIG_ETH3ADDR 00:E0:0C:02:03:FD #endif #define CONFIG_IPADDR 192.168.1.251 @@ -488,8 +483,8 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_BOOTFILE 8544ds/uImage.uboot #define CONFIG_UBOOTPATH 8544ds/u-boot.bin /* TFTP server */ -#define CONFIG_SERVERIP 192.168.0.1 -#define CONFIG_GATEWAYIP 192.168.0.1 +#define CONFIG_SERVERIP 192.168.1.1 +#define CONFIG_GATEWAYIP 192.168.1.1 #define CONFIG_NETMASK 255.255.0.0 #define CONFIG_LOADADDR 1000000 /*default location for tftp and bootm*/ @@ -499,65 +494,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_BAUDRATE 115200 -#if defined(CONFIG_PCIE1) || defined(CONFIG_PCIE2) || defined(CONFIG_PCIE3) -#define PCIE_ENV \ - "pciereg=md ${a}000 6; md ${a}020 4; md ${a}bf8 2; echo o;md ${a}c00 25;" \ - "echo i; md ${a}da0 15; echo e;md ${a}e00 e; echo d; md ${a}f00 c\0" \ - "pcieerr=md ${a}020 1; md ${a}e00 e;" \ - "pci d.b $b.0 7 1; pci d.w $b.0 1e 1;" \ - "pci d.w $b.0 56 1;" \ - "pci d $b.0 104 1;pci d $b.0 110 1;pci d $b.0 130 1\0" \ - "pcieerrc=mw ${a}020 ffffffff; mw ${a}e00 ffffffff;" \ - "pci w.b $b.0 7 ff; pci w.w $b.0 1e ffff; pci w.w $b.0 56 ffff;" \ - "pci w $b.0 104 ffffffff; pci w $b.0 110 ffffffff;" \ - "pci w $b.0 130 ffffffff\0" \ - "pciecfg=pci d $b.0 0 20; pci d $b.0 100 e; pci d $b.0 400 69\0" \ - "pcie1regs=setenv a e000a; run pciereg\0" \ - "pcie2regs=setenv a e0009; run pciereg\0" \ - "pcie3regs=setenv a e000b; run pciereg\0" \ - "pcie1cfg=setenv b 3; run pciecfg\0" \ - "pcie2cfg=setenv b 5; run pciecfg\0" \ - "pcie3cfg=setenv b 0; run pciecfg\0" \ - "pcie1err=setenv a e000a; setenv b 3; run pcieerr\0" \ - "pcie2err=setenv a e0009; setenv b 5; run pcieerr\0" \ - "pcie3err=setenv a e000b; setenv b 0; run pcieerr\0" \ - "pcie1errc=setenv a e000a; setenv b 3; run pcieerrc\0" \ - "pcie2errc=setenv a e0009; setenv b 5; run pcieerrc\0" \ - "pcie3errc=setenv a e000b; setenv b 0; run pcieerrc\0" -#else -#define PCIE_ENV "" -#endif - -#if defined(CONFIG_PCI1) -#define PCI_ENV \ - "pcireg=md ${a}000 3; echo o;md ${a}c00 25; echo i; md ${a}da0 15;" \ - "echo e;md ${a}e00 9\0" \ - "pci1regs=setenv a e0008; run pcireg\0" \ - "pcierr=md ${a}e00 8; pci d.b $b.0 7 1; pci d.w $b.0 1e 1;" \ - "pci d.w $b.0 56 1\0" \ - "pcierrc=mw ${a}e00 ffffffff; mw ${a}e0c 0; pci w.b $b.0 7 ff;" \ - "pci w.w $b.0 1e ffff; pci w.w $b.0 56 ffff\0" \ - "pci1err=setenv a e0008; setenv b 7; run pcierr\0" \ - "pci1errc=setenv a e0008; setenv b 7; run pcierrc\0" -#else -#define PCI_ENV "" -#endif - -#if defined(CONFIG_TSEC_ENET) -#define ENET_ENV \ - "enetreg1=md ${a}000 2; md ${a}010 9; md ${a}050 4; md ${a}08c 1;" \ - "md ${a}098 2\0" \ - "enetregt=echo t;md ${a}100 6; md ${a}140 2; md ${a}180 10; md ${a}200 10\0" \ - "enetregr=echo r;md ${a}300 6; md ${a}330 5; md ${a}380 10; md ${a}400 10\0" \ - "enetregm=echo mac;md ${a}500 5; md ${a}520 28;echo fifo;md ${a}a00 1;" \ - "echo mib;md ${a}680 31\0" \ - "enetreg=run enetreg1; run enetregm; run enetregt; run enetregr\0" \ - "enet1regs=setenv a e0024; run enetreg\0" \ - "enet3regs=setenv a e0026; run enetreg\0" -#else -#define ENET_ENV "" -#endif - #define CONFIG_EXTRA_ENV_SETTINGS \ "netdev=eth0\0" \ "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0" \ @@ -570,29 +506,9 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); "consoledev=ttyS0\0" \ "ramdiskaddr=2000000\0" \ "ramdiskfile=8544ds/ramdisk.uboot\0" \ - "dtbaddr=c00000\0" \ - "dtbfile=8544ds/mpc8544ds.dtb\0" \ - "bdev=sda3\0" \ - "eoi=mw e00400b0 0\0" \ - "iack=md e00400a0 1\0" \ - "ddrreg=md ${a}000 8; md ${a}080 8;md ${a}100 d; md ${a}140 4; md ${a}bf0 4;" \ - "md ${a}e00 3; md ${a}e20 3; md ${a}e40 7; md ${a}f00 5\0" \ - "ddrregs=setenv a e0002; run ddrreg\0" \ - "gureg=md ${a}000 2c; md ${a}0b0 1; md ${a}0c0 1; md ${a}b20 3;" \ - "md ${a}e00 1; md ${a}e60 1; md ${a}ef0 15\0" \ - "guregs=setenv a e00e0; run gureg\0" \ - "ecmreg=md ${a}000 1; md ${a}010 1; md ${a}bf8 2; md ${a}e00 6\0" \ - "ecmregs=setenv a e0001; run ecmreg\0" \ - "lawregs=md e0000c08 4b\0" \ - "lbcregs=md e0005000 36\0" \ - "dma0regs=md e0021100 12\0" \ - "dma1regs=md e0021180 12\0" \ - "dma2regs=md e0021200 12\0" \ - "dma3regs=md e0021280 12\0" \ - PCIE_ENV \ - PCI_ENV \ - ENET_ENV - + "fdtaddr=c00000\0" \ + "fdtfile=8544ds/mpc8544ds.dtb\0" \ + "bdev=sda3\0" #define CONFIG_NFSBOOTCOMMAND \ "setenv bootargs root=/dev/nfs rw " \ @@ -600,23 +516,22 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ "console=$consoledev,$baudrate $othbootargs;" \ "tftp $loadaddr $bootfile;" \ - "tftp $dtbaddr $dtbfile;" \ - "bootm $loadaddr - $dtbaddr" - + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr - $fdtaddr" #define CONFIG_RAMBOOTCOMMAND \ "setenv bootargs root=/dev/ram rw " \ "console=$consoledev,$baudrate $othbootargs;" \ "tftp $ramdiskaddr $ramdiskfile;" \ "tftp $loadaddr $bootfile;" \ - "tftp $dtbaddr $dtbfile;" \ - "bootm $loadaddr $ramdiskaddr $dtbaddr" + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr $ramdiskaddr $fdtaddr" #define CONFIG_BOOTCOMMAND \ "setenv bootargs root=/dev/$bdev rw " \ "console=$consoledev,$baudrate $othbootargs;" \ "tftp $loadaddr $bootfile;" \ - "tftp $dtbaddr $dtbfile;" \ - "bootm $loadaddr - $dtbaddr" + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr - $fdtaddr" #endif /* __CONFIG_H */ diff --git a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h index 4edc7fd2b6..3f382e59a6 100644 --- a/include/configs/MPC8548CDS.h +++ b/include/configs/MPC8548CDS.h @@ -42,6 +42,7 @@ #undef CONFIG_RIO #undef CONFIG_PCI2 #define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */ +#define CONFIG_FSL_PCIE_RESET 1 /* need PCIe reset errata */ #define CONFIG_TSEC_ENET /* tsec ethernet support */ #define CONFIG_ENV_OVERWRITE @@ -333,14 +334,9 @@ extern unsigned long get_clock_freq(void); #endif /* pass open firmware flat tree */ -#define CONFIG_OF_FLAT_TREE 1 -#define CONFIG_OF_BOARD_SETUP 1 - -#define OF_CPU "PowerPC,8548@0" -#define OF_SOC "soc8548@e0000000" -#define OF_TBCLK (bd->bi_busfreq / 8) -#define OF_STDOUT_PATH "/soc8548@e0000000/serial@4600" -#define OF_PCI "pci@e0008000" +#define CONFIG_OF_LIBFDT 1 +#define CONFIG_OF_BOARD_SETUP 1 +#define CONFIG_OF_STDOUT_VIA_ALIAS 1 /* * I2C @@ -483,6 +479,7 @@ extern unsigned long get_clock_freq(void); #define CONFIG_CMD_PING #define CONFIG_CMD_I2C #define CONFIG_CMD_MII +#define CONFIG_CMD_ELF #if defined(CONFIG_PCI) #define CONFIG_CMD_PCI @@ -495,6 +492,7 @@ extern unsigned long get_clock_freq(void); * Miscellaneous configurable options */ #define CFG_LONGHELP /* undef to save memory */ +#define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CFG_LOAD_ADDR 0x2000000 /* default load address */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) @@ -568,72 +566,6 @@ extern unsigned long get_clock_freq(void); #define CONFIG_BAUDRATE 115200 -#if defined(CONFIG_PCIE1) -#define PCIE_ENV \ - "pciereg=md ${a}000 6; md ${a}020 4; md ${a}bf8 2; echo o;md ${a}c00 25;" \ - "echo i; md ${a}da0 15; echo e;md ${a}e00 e; echo d; md ${a}f00 c\0" \ - "pcieerr=md ${a}020 1; md ${a}e00 e; pci d.b $b.0 7 1; pci d.w $b.0 1e 1;" \ - "pci d.w $b.0 56 1; pci d $b.0 104 1; pci d $b.0 110 1;" \ - "pci d $b.0 130 1\0" \ - "pcieerrc=mw ${a}020 ffffffff; mw ${a}e00 ffffffff; pci w.b $b.0 7 ff;" \ - "pci w.w $b.0 1e ffff; pci w.w $b.0 56 ffff; pci w $b.0 104 ffffffff;"\ - "pci w $b.0 110 ffffffff; pci w $b.0 130 ffffffff\0" \ - "pciecfg=pci d $b.0 0 20; pci d $b.0 100 e; pci d $b.0 400 69\0" \ - "pcie1regs=setenv a e000a; run pciereg\0" \ - "pcie1cfg=setenv b 3; run pciecfg\0" \ - "pcie1err=setenv a e000a; setenv b 3; run pcieerr\0" \ - "pcie1errc=setenv a e000a; setenv b 3; run pcieerrc\0" -#else -#define PCIE_ENV "" -#endif - -#if defined(CONFIG_PCI1) || defined(CONFIG_PCI2) -#define PCI_ENV \ - "pcireg=md ${a}000 3; echo o;md ${a}c00 25; echo i; md ${a}da0 15;" \ - "echo e;md ${a}e00 9\0" \ - "pcierr=md ${a}e00 8; pci d.b $b.0 7 1;pci d.w $b.0 1e 1;" \ - "pci d.w $b.0 56 1\0" \ - "pcierrc=mw ${a}e00 ffffffff; mw ${a}e0c 0; pci w.b $b.0 7 ff;" \ - "pci w.w $b.0 1e ffff; pci w.w $b.0 56 ffff\0" -#else -#define PCI_ENV "" -#endif - -#if defined(CONFIG_PCI1) -#define PCI_ENV1 \ - "pci1regs=setenv a e0008; run pcireg\0" \ - "pci1err=setenv a e0008; setenv b 0; run pcierr\0" \ - "pci1errc=setenv a e0008; setenv b 0; run pcierrc\0" -#else -#define PCI_ENV1 "" -#endif - -#if defined(CONFIG_PCI2) -#define PCI_ENV2 \ - "pci2regs=setenv a e0009; run pcireg\0" \ - "pci2err=setenv a e0009; setenv b 123; run pcierr\0" \ - "pci2errc=setenv a e0009; setenv b 123; run pcierrc\0" -#else -#define PCI_ENV2 "" -#endif - -#if defined(CONFIG_TSEC_ENET) -#define ENET_ENV \ - "enetreg1=md ${a}000 2; md ${a}010 9; md ${a}050 4; md ${a}08c 1;" \ - "md ${a}098 2\0" \ - "enetregt=echo t;md ${a}100 6; md ${a}140 2; md ${a}180 10; md ${a}200 10\0" \ - "enetregr=echo r;md ${a}300 6; md ${a}330 5; md ${a}380 10; md ${a}400 10\0" \ - "enetregm=echo mac;md ${a}500 5; md ${a}520 28;echo fifo;md ${a}a00 1;" \ - "echo mib;md ${a}680 31\0" \ - "enetreg=run enetreg1; run enetregm; run enetregt; run enetregr\0" \ - "enet1regs=setenv a e0024; run enetreg\0" \ - "enet2regs=setenv a e0025; run enetreg\0" \ - "enet3regs=setenv a e0026; run enetreg\0" \ - "enet4regs=setenv a e0027; run enetreg\0" -#else -#define ENET_ENV "" -#endif - #define CONFIG_EXTRA_ENV_SETTINGS \ "netdev=eth0\0" \ "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0" \ @@ -647,28 +579,7 @@ extern unsigned long get_clock_freq(void); "ramdiskaddr=2000000\0" \ "ramdiskfile=ramdisk.uboot\0" \ "fdtaddr=c00000\0" \ - "fdtfile=mpc8548cds.dtb\0" \ - "eoi=mw e00400b0 0\0" \ - "iack=md e00400a0 1\0" \ - "ddrreg=md ${a}000 8; md ${a}080 8;md ${a}100 d; md ${a}140 4; md ${a}bf0 4;" \ - "md ${a}e00 3; md ${a}e20 3; md ${a}e40 7; md ${a}f00 5\0" \ - "ddrregs=setenv a e0002; run ddrreg\0" \ - "gureg=md ${a}000 2c; md ${a}0b0 1; md ${a}0c0 1; md ${a}b20 3;" \ - "md ${a}e00 1; md ${a}e60 1; md ${a}ef0 15\0" \ - "guregs=setenv a e00e0; run gureg\0" \ - "ecmreg=md ${a}000 1; md ${a}010 1; md ${a}bf8 2; md ${a}e00 6\0" \ - "ecmregs=setenv a e0001; run ecmreg\0" \ - "lawregs=md e0000c08 4b\0" \ - "lbcregs=md e0005000 36\0" \ - "dma0regs=md e0021100 12\0" \ - "dma1regs=md e0021180 12\0" \ - "dma2regs=md e0021200 12\0" \ - "dma3regs=md e0021280 12\0" \ - PCIE_ENV \ - PCI_ENV \ - PCI_ENV1 \ - PCI_ENV2 \ - ENET_ENV + "fdtfile=mpc8548cds.dtb\0" #define CONFIG_NFSBOOTCOMMAND \ "setenv bootargs root=/dev/nfs rw " \ diff --git a/include/configs/MPC8555CDS.h b/include/configs/MPC8555CDS.h index c414bf033e..90ef3d6b67 100644 --- a/include/configs/MPC8555CDS.h +++ b/include/configs/MPC8555CDS.h @@ -309,14 +309,9 @@ extern unsigned long get_clock_freq(void); #endif /* pass open firmware flat tree */ -#define CONFIG_OF_FLAT_TREE 1 -#define CONFIG_OF_BOARD_SETUP 1 - -#define OF_CPU "PowerPC,8555@0" -#define OF_SOC "soc8555@e0000000" -#define OF_TBCLK (bd->bi_busfreq / 8) -#define OF_STDOUT_PATH "/soc8555@e0000000/serial@4600" -#define OF_PCI "pci@e0008000" +#define CONFIG_OF_LIBFDT 1 +#define CONFIG_OF_BOARD_SETUP 1 +#define CONFIG_OF_STDOUT_VIA_ALIAS 1 /* * I2C @@ -422,6 +417,7 @@ extern unsigned long get_clock_freq(void); #define CONFIG_CMD_PING #define CONFIG_CMD_I2C #define CONFIG_CMD_MII +#define CONFIG_CMD_ELF #if defined(CONFIG_PCI) #define CONFIG_CMD_PCI @@ -434,6 +430,7 @@ extern unsigned long get_clock_freq(void); * Miscellaneous configurable options */ #define CFG_LONGHELP /* undef to save memory */ +#define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CFG_LOAD_ADDR 0x2000000 /* default load address */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) diff --git a/include/configs/MPC8560ADS.h b/include/configs/MPC8560ADS.h index a8f362fa13..d4e0de0d32 100644 --- a/include/configs/MPC8560ADS.h +++ b/include/configs/MPC8560ADS.h @@ -289,13 +289,9 @@ #endif /* pass open firmware flat tree */ -#define CONFIG_OF_FLAT_TREE 1 -#define CONFIG_OF_BOARD_SETUP 1 - -#define OF_CPU "PowerPC,8560@0" -#define OF_SOC "soc8560@e0000000" -#define OF_TBCLK (bd->bi_busfreq / 8) -#define OF_STDOUT_PATH "/soc8560@e0000000/serial@4500" +#define CONFIG_OF_LIBFDT 1 +#define CONFIG_OF_BOARD_SETUP 1 +#define CONFIG_OF_STDOUT_VIA_ALIAS 1 /* * I2C @@ -450,6 +446,7 @@ #define CONFIG_CMD_PING #define CONFIG_CMD_I2C +#define CONFIG_CMD_ELF #if defined(CONFIG_PCI) #define CONFIG_CMD_PCI @@ -471,6 +468,7 @@ * Miscellaneous configurable options */ #define CFG_LONGHELP /* undef to save memory */ +#define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CFG_LOAD_ADDR 0x1000000 /* default load address */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ @@ -525,6 +523,8 @@ #define CONFIG_ETH1ADDR 00:E0:0C:00:01:FD #define CONFIG_HAS_ETH2 #define CONFIG_ETH2ADDR 00:E0:0C:00:02:FD +#define CONFIG_HAS_ETH3 +#define CONFIG_ETH3ADDR 00:E0:0C:00:03:FD #endif #define CONFIG_IPADDR 192.168.1.253 diff --git a/include/configs/MPC8568MDS.h b/include/configs/MPC8568MDS.h index b9366cc994..59f490e856 100644 --- a/include/configs/MPC8568MDS.h +++ b/include/configs/MPC8568MDS.h @@ -33,7 +33,11 @@ #define CONFIG_MPC8568 1 /* MPC8568 specific */ #define CONFIG_MPC8568MDS 1 /* MPC8568MDS board specific */ -#define CONFIG_PCI +#define CONFIG_PCI 1 /* Enable PCI/PCIE */ +#define CONFIG_PCI1 1 /* PCI controller */ +#define CONFIG_PCIE1 1 /* PCIE controller */ +#define CONFIG_FSL_PCI_INIT 1 /* use common fsl pci init code */ +#define CONFIG_FSL_PCIE_RESET 1 /* need PCIe reset errata */ #define CONFIG_TSEC_ENET /* tsec ethernet support */ #define CONFIG_QE /* Enable QE */ #define CONFIG_ENV_OVERWRITE @@ -87,6 +91,9 @@ extern unsigned long get_clock_freq(void); #define CFG_CCSRBAR 0xe0000000 /* relocated CCSRBAR */ #define CFG_IMMR CFG_CCSRBAR /* PQII uses CFG_IMMR */ +#define CFG_PCI1_ADDR (CFG_CCSRBAR+0x8000) +#define CFG_PCIE1_ADDR (CFG_CCSRBAR+0xa000) + /* * DDR Setup */ @@ -290,14 +297,9 @@ extern unsigned long get_clock_freq(void); #endif /* pass open firmware flat tree */ -#define CONFIG_OF_FLAT_TREE 1 -#define CONFIG_OF_BOARD_SETUP 1 - -#define OF_CPU "PowerPC,8568@0" -#define OF_SOC "soc8568@e0000000" -#define OF_QE "qe@e0080000" -#define OF_TBCLK (bd->bi_busfreq / 8) -#define OF_STDOUT_PATH "/soc8568@e0000000/serial@4500" +#define CONFIG_OF_LIBFDT 1 +#define CONFIG_OF_BOARD_SETUP 1 +#define CONFIG_OF_STDOUT_VIA_ALIAS 1 /* * I2C @@ -325,12 +327,12 @@ extern unsigned long get_clock_freq(void); #define CFG_PCI1_IO_PHYS 0xe2000000 #define CFG_PCI1_IO_SIZE 0x00800000 /* 8M */ -#define CFG_PEX_MEM_BASE 0xa0000000 -#define CFG_PEX_MEM_PHYS CFG_PEX_MEM_BASE -#define CFG_PEX_MEM_SIZE 0x10000000 /* 256M */ -#define CFG_PEX_IO_BASE 0x00000000 -#define CFG_PEX_IO_PHYS 0xe2800000 -#define CFG_PEX_IO_SIZE 0x00800000 /* 8M */ +#define CFG_PCIE1_MEM_BASE 0xa0000000 +#define CFG_PCIE1_MEM_PHYS CFG_PCIE1_MEM_BASE +#define CFG_PCIE1_MEM_SIZE 0x20000000 /* 512M */ +#define CFG_PCIE1_IO_BASE 0x00000000 +#define CFG_PCIE1_IO_PHYS 0xe2800000 +#define CFG_PCIE1_IO_SIZE 0x00800000 /* 8M */ #define CFG_SRIO_MEM_BASE 0xc0000000 @@ -383,6 +385,11 @@ extern unsigned long get_clock_freq(void); #undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ #define CFG_PCI_SUBSYS_VENDORID 0x1057 /* Motorola */ +/* PCI view of System Memory */ +#define CFG_PCI_MEMORY_BUS 0x00000000 +#define CFG_PCI_MEMORY_PHYS 0x00000000 +#define CFG_PCI_MEMORY_SIZE 0x80000000 + #endif /* CONFIG_PCI */ #ifndef CONFIG_NET_MULTI @@ -440,6 +447,7 @@ extern unsigned long get_clock_freq(void); #define CONFIG_CMD_PING #define CONFIG_CMD_I2C #define CONFIG_CMD_MII +#define CONFIG_CMD_ELF #if defined(CONFIG_PCI) #define CONFIG_CMD_PCI @@ -452,6 +460,7 @@ extern unsigned long get_clock_freq(void); * Miscellaneous configurable options */ #define CFG_LONGHELP /* undef to save memory */ +#define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CFG_LOAD_ADDR 0x2000000 /* default load address */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) |