diff options
Diffstat (limited to 'include/configs')
| -rw-r--r-- | include/configs/TQM5200.h | 26 | ||||
| -rw-r--r-- | include/configs/charon.h | 80 |
2 files changed, 97 insertions, 9 deletions
diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h index c2f6b8a7b3..e822a5939c 100644 --- a/include/configs/TQM5200.h +++ b/include/configs/TQM5200.h @@ -49,7 +49,8 @@ #endif /* On a Cameron or on a FO300 board or ... */ -#if !defined(CONFIG_CAM5200) && !defined(CONFIG_FO300) +#if !defined(CONFIG_CAM5200) && !defined(CONFIG_CHARON) \ + && !defined(CONFIG_FO300) #define CONFIG_STK52XX 1 /* ... on a STK52XX board */ #endif @@ -79,7 +80,7 @@ /* switch is open */ #endif /* CONFIG_FO300 */ -#ifdef CONFIG_STK52XX +#if defined(CONFIG_CHARON) || defined(CONFIG_STK52XX) #define CONFIG_PS2KBD /* AT-PS/2 Keyboard */ #define CONFIG_PS2MULT /* .. on PS/2 Multiplexer */ #define CONFIG_PS2SERIAL 6 /* .. on PSC6 */ @@ -92,7 +93,7 @@ * 0x40000000 - 0x4fffffff - PCI Memory * 0x50000000 - 0x50ffffff - PCI IO Space */ -#ifdef CONFIG_STK52XX +#if defined(CONFIG_CHARON) || defined(CONFIG_STK52XX) #define CONFIG_PCI 1 #define CONFIG_PCI_PNP 1 /* #define CONFIG_PCI_SCAN_SHOW 1 */ @@ -140,7 +141,8 @@ #define CONFIG_ISO_PARTITION /* USB */ -#if defined(CONFIG_STK52XX) || defined(CONFIG_FO300) +#if defined(CONFIG_CHARON) || defined(CONFIG_FO300) || \ + defined(CONFIG_STK52XX) #define CONFIG_USB_OHCI_NEW #define CONFIG_SYS_OHCI_BE_CONTROLLER #define CONFIG_USB_STORAGE @@ -204,13 +206,15 @@ #define CONFIG_PCIAUTO_SKIP_HOST_BRIDGE 1 #endif -#if defined(CONFIG_MINIFAP) || defined(CONFIG_STK52XX) || defined(CONFIG_FO300) +#if defined(CONFIG_CHARON) || defined(CONFIG_FO300) || \ + defined(CONFIG_MINIFAP) || defined(CONFIG_STK52XX) #define CONFIG_CMD_IDE #define CONFIG_CMD_FAT #define CONFIG_CMD_EXT2 #endif -#if defined(CONFIG_STK52XX) || defined(CONFIG_FO300) +#if defined(CONFIG_CHARON) || defined(CONFIG_FO300) || \ + defined(CONFIG_STK52XX) #define CONFIG_CFG_USB #define CONFIG_CFG_FAT #endif @@ -291,7 +295,9 @@ ":${hostname}:${netdev}:off panic=1\0" \ "addcons=setenv bootargs ${bootargs} " \ "console=${console},${baudrate}\0" \ - "flash_self_old=sete console ttyS0; run ramargs addip addcons;" \ + "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \ + "flash_self_old=sete console ttyS0; " \ + "run ramargs addip addcons addmtd; " \ "bootm ${kernel_addr} ${ramdisk_addr}\0" \ "flash_self=run ramargs addip addcons;" \ "bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \ @@ -303,7 +309,7 @@ "sete console ttyS0; run nfsargs addip addcons;bootm\0" \ "net_nfs=tftp ${kernel_addr_r} ${bootfile}; " \ "tftp ${fdt_addr_r} ${fdt_file}; " \ - "run nfsargs addip addcons; " \ + "run nfsargs addip addcons addmtd; " \ "bootm ${kernel_addr_r} - ${fdt_addr_r}\0" \ CUSTOM_ENV_SETTINGS \ "load=tftp 200000 ${u-boot}\0" \ @@ -420,7 +426,7 @@ #define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ #define MTDIDS_DEFAULT "nor0=TQM5200-0" -#ifdef CONFIG_STK52XX +#if defined(CONFIG_CHARON) || defined(CONFIG_STK52XX) # if defined(CONFIG_TQM5200_B) # if defined(CONFIG_SYS_LOWBOOT) # define MTDPARTS_DEFAULT "mtdparts=TQM5200-0:1m(firmware)," \ @@ -566,6 +572,7 @@ * use PSC1: Bits 29-31 (mask: 0x00000007): * 100 -> UART (on all boards). */ +#if !defined(CONFIG_SYS_GPS_PORT_CONFIG) #if defined (CONFIG_MINIFAP) # define CONFIG_SYS_GPS_PORT_CONFIG 0x91000004 #elif defined (CONFIG_STK52XX) @@ -585,6 +592,7 @@ #else /* TMQ5200 Inbetriebnahme-Board */ # define CONFIG_SYS_GPS_PORT_CONFIG 0x81000004 #endif +#endif /* * RTC configuration diff --git a/include/configs/charon.h b/include/configs/charon.h new file mode 100644 index 0000000000..80a273c7e1 --- /dev/null +++ b/include/configs/charon.h @@ -0,0 +1,80 @@ +/* + * (C) Copyright 2003-2005 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * (C) Copyright 2004-2006 + * Martin Krause, TQ-Systems GmbH, martin.krause@tqs.de + * + * (C) Copyright 2010 + * Heiko Schocher, DENX Software Engineering, hs@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_CHARON_H +#define __CONFIG_CHARON_H + +#define CONFIG_CHARON +#define CONFIG_HOSTNAME charon + +#define CONFIG_SYS_GPS_PORT_CONFIG 0x81550414 + +/* include common defines/options for TQM52xx boards */ +#include "TQM5200.h" + +/* defines special on charon board */ +#undef CONFIG_RTC_MPC5200 +#undef CONFIG_CMD_DATE + +#undef CUSTOM_ENV_SETTINGS +#define CUSTOM_ENV_SETTINGS \ + "bootfile=/tftpboot/charon/uImage\0" \ + "fdt_file=/tftpboot/charon/charon.dtb\0" \ + "u-boot=/tftpboot/charon/u-boot.bin\0" \ + "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" + + +/* additional features on charon board */ +#define CONFIG_RESET_PHY_R + +/* + * I2C configuration + */ +#define CONFIG_I2C_MULTI_BUS + +#define CONFIG_SYS_TFP410_ADDR 0x38 +#define CONFIG_SYS_TFP410_BUS 0 + +/* + * FPGA configuration + */ +#define CONFIG_SYS_CS3_START 0xE8000000 +#define CONFIG_SYS_CS3_SIZE 0x80000 /* 512 KByte */ + +/* + * CS3 Config Register Init: + * CS3 Enabled + * AddrBus: 8bits + * DataBus: 4bytes + * Multiplexed: Yes + * MuxBank: 00 + */ +#define CONFIG_SYS_CS3_CFG 0x00009310 + +#endif /* __CONFIG_CHARON_H */ |