summaryrefslogtreecommitdiff
path: root/include/configs
diff options
context:
space:
mode:
Diffstat (limited to 'include/configs')
-rw-r--r--include/configs/ls1028a_common.h86
-rw-r--r--include/configs/ls1028ardb.h88
2 files changed, 88 insertions, 86 deletions
diff --git a/include/configs/ls1028a_common.h b/include/configs/ls1028a_common.h
index 2a38e9106e..6905694d10 100644
--- a/include/configs/ls1028a_common.h
+++ b/include/configs/ls1028a_common.h
@@ -74,92 +74,6 @@
func(DHCP, dhcp, na)
#include <config_distro_bootcmd.h>
-/* Initial environment variables */
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "board=ls1028ardb\0" \
- "hwconfig=fsl_ddr:bank_intlv=auto\0" \
- "ramdisk_addr=0x800000\0" \
- "ramdisk_size=0x2000000\0" \
- "bootm_size=0x10000000\0" \
- "fdt_addr=0x00f00000\0" \
- "kernel_addr=0x01000000\0" \
- "scriptaddr=0x80000000\0" \
- "scripthdraddr=0x80080000\0" \
- "fdtheader_addr_r=0x80100000\0" \
- "kernelheader_addr_r=0x80200000\0" \
- "load_addr=0xa0000000\0" \
- "kernel_addr_r=0x81000000\0" \
- "fdt_addr_r=0x90000000\0" \
- "ramdisk_addr_r=0xa0000000\0" \
- "kernel_start=0x1000000\0" \
- "kernelheader_start=0x600000\0" \
- "kernel_load=0xa0000000\0" \
- "kernel_size=0x2800000\0" \
- "kernelheader_size=0x40000\0" \
- "kernel_addr_sd=0x8000\0" \
- "kernel_size_sd=0x14000\0" \
- "kernelhdr_addr_sd=0x3000\0" \
- "kernelhdr_size_sd=0x20\0" \
- "console=ttyS0,115200\0" \
- "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
- BOOTENV \
- "boot_scripts=ls1028ardb_boot.scr\0" \
- "boot_script_hdr=hdr_ls1028ardb_bs.out\0" \
- "scan_dev_for_boot_part=" \
- "part list ${devtype} ${devnum} devplist; " \
- "env exists devplist || setenv devplist 1; " \
- "for distro_bootpart in ${devplist}; do " \
- "if fstype ${devtype} " \
- "${devnum}:${distro_bootpart} " \
- "bootfstype; then " \
- "run scan_dev_for_boot; " \
- "fi; " \
- "done\0" \
- "scan_dev_for_boot=" \
- "echo Scanning ${devtype} " \
- "${devnum}:${distro_bootpart}...; " \
- "for prefix in ${boot_prefixes}; do " \
- "run scan_dev_for_scripts; " \
- "done;" \
- "\0" \
- "boot_a_script=" \
- "load ${devtype} ${devnum}:${distro_bootpart} " \
- "${scriptaddr} ${prefix}${script}; " \
- "env exists secureboot && load ${devtype} " \
- "${devnum}:${distro_bootpart} " \
- "${scripthdraddr} ${prefix}${boot_script_hdr} " \
- "&& esbc_validate ${scripthdraddr};" \
- "source ${scriptaddr}\0" \
- "xspi_bootcmd=echo Trying load from FlexSPI flash ...;" \
- "sf probe 0:0 && sf read $load_addr " \
- "$kernel_start $kernel_size ; env exists secureboot &&" \
- "sf read $kernelheader_addr_r $kernelheader_start " \
- "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; "\
- " bootm $load_addr#$board\0" \
- "xspi_hdploadcmd=echo Trying load HDP firmware from FlexSPI...;" \
- "sf probe 0:0 && sf read $load_addr 0x940000 0x30000 " \
- "&& hdp load $load_addr 0x2000\0" \
- "sd_bootcmd=echo Trying load from SD ...;" \
- "mmcinfo; mmc read $load_addr " \
- "$kernel_addr_sd $kernel_size_sd && " \
- "env exists secureboot && mmc read $kernelheader_addr_r " \
- "$kernelhdr_addr_sd $kernelhdr_size_sd " \
- " && esbc_validate ${kernelheader_addr_r};" \
- "bootm $load_addr#$board\0" \
- "sd_hdploadcmd=echo Trying load HDP firmware from SD..;" \
- "mmcinfo;mmc read $load_addr 0x4a00 0x200 " \
- "&& hdp load $load_addr 0x2000\0" \
- "emmc_bootcmd=echo Trying load from EMMC ..;" \
- "mmcinfo; mmc dev 1; mmc read $load_addr " \
- "$kernel_addr_sd $kernel_size_sd && " \
- "env exists secureboot && mmc read $kernelheader_addr_r " \
- "$kernelhdr_addr_sd $kernelhdr_size_sd " \
- " && esbc_validate ${kernelheader_addr_r};" \
- "bootm $load_addr#$board\0" \
- "emmc_hdploadcmd=echo Trying load HDP firmware from EMMC..;" \
- "mmc dev 1;mmcinfo;mmc read $load_addr 0x4a00 0x200 " \
- "&& hdp load $load_addr 0x2000\0"
-
#undef CONFIG_BOOTCOMMAND
#define XSPI_NOR_BOOTCOMMAND \
diff --git a/include/configs/ls1028ardb.h b/include/configs/ls1028ardb.h
index a4c3d73d2a..0f289cb078 100644
--- a/include/configs/ls1028ardb.h
+++ b/include/configs/ls1028ardb.h
@@ -72,4 +72,92 @@
#define CONFIG_SCSI_AHCI_PLAT
#define CONFIG_SYS_SATA1 AHCI_BASE_ADDR1
+/* Initial environment variables */
+#ifndef SPL_NO_ENV
+#undef CONFIG_EXTRA_ENV_SETTINGS
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "board=ls1028ardb\0" \
+ "hwconfig=fsl_ddr:bank_intlv=auto\0" \
+ "ramdisk_addr=0x800000\0" \
+ "ramdisk_size=0x2000000\0" \
+ "bootm_size=0x10000000\0" \
+ "fdt_addr=0x00f00000\0" \
+ "kernel_addr=0x01000000\0" \
+ "scriptaddr=0x80000000\0" \
+ "scripthdraddr=0x80080000\0" \
+ "fdtheader_addr_r=0x80100000\0" \
+ "kernelheader_addr_r=0x80200000\0" \
+ "load_addr=0xa0000000\0" \
+ "kernel_addr_r=0x81000000\0" \
+ "fdt_addr_r=0x90000000\0" \
+ "ramdisk_addr_r=0xa0000000\0" \
+ "kernel_start=0x1000000\0" \
+ "kernelheader_start=0x600000\0" \
+ "kernel_load=0xa0000000\0" \
+ "kernel_size=0x2800000\0" \
+ "kernelheader_size=0x40000\0" \
+ "kernel_addr_sd=0x8000\0" \
+ "kernel_size_sd=0x14000\0" \
+ "kernelhdr_addr_sd=0x3000\0" \
+ "kernelhdr_size_sd=0x20\0" \
+ "console=ttyS0,115200\0" \
+ "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
+ BOOTENV \
+ "boot_scripts=ls1028ardb_boot.scr\0" \
+ "boot_script_hdr=hdr_ls1028ardb_bs.out\0" \
+ "scan_dev_for_boot_part=" \
+ "part list ${devtype} ${devnum} devplist; " \
+ "env exists devplist || setenv devplist 1; " \
+ "for distro_bootpart in ${devplist}; do " \
+ "if fstype ${devtype} " \
+ "${devnum}:${distro_bootpart} " \
+ "bootfstype; then " \
+ "run scan_dev_for_boot; " \
+ "fi; " \
+ "done\0" \
+ "scan_dev_for_boot=" \
+ "echo Scanning ${devtype} " \
+ "${devnum}:${distro_bootpart}...; " \
+ "for prefix in ${boot_prefixes}; do " \
+ "run scan_dev_for_scripts; " \
+ "done;" \
+ "\0" \
+ "boot_a_script=" \
+ "load ${devtype} ${devnum}:${distro_bootpart} " \
+ "${scriptaddr} ${prefix}${script}; " \
+ "env exists secureboot && load ${devtype} " \
+ "${devnum}:${distro_bootpart} " \
+ "${scripthdraddr} ${prefix}${boot_script_hdr} " \
+ "&& esbc_validate ${scripthdraddr};" \
+ "source ${scriptaddr}\0" \
+ "xspi_bootcmd=echo Trying load from FlexSPI flash ...;" \
+ "sf probe 0:0 && sf read $load_addr " \
+ "$kernel_start $kernel_size ; env exists secureboot &&" \
+ "sf read $kernelheader_addr_r $kernelheader_start " \
+ "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; "\
+ " bootm $load_addr#$board\0" \
+ "xspi_hdploadcmd=echo Trying load HDP firmware from FlexSPI...;" \
+ "sf probe 0:0 && sf read $load_addr 0x940000 0x30000 " \
+ "&& hdp load $load_addr 0x2000\0" \
+ "sd_bootcmd=echo Trying load from SD ...;" \
+ "mmc dev 0;mmcinfo; mmc read $load_addr " \
+ "$kernel_addr_sd $kernel_size_sd && " \
+ "env exists secureboot && mmc read $kernelheader_addr_r " \
+ "$kernelhdr_addr_sd $kernelhdr_size_sd " \
+ " && esbc_validate ${kernelheader_addr_r};" \
+ "bootm $load_addr#$board\0" \
+ "sd_hdploadcmd=echo Trying load HDP firmware from SD..;" \
+ "mmc dev 0;mmcinfo;mmc read $load_addr 0x4a00 0x200 " \
+ "&& hdp load $load_addr 0x2000\0" \
+ "emmc_bootcmd=echo Trying load from EMMC ..;" \
+ "mmc dev 1;mmcinfo; mmc read $load_addr " \
+ "$kernel_addr_sd $kernel_size_sd && " \
+ "env exists secureboot && mmc read $kernelheader_addr_r " \
+ "$kernelhdr_addr_sd $kernelhdr_size_sd " \
+ " && esbc_validate ${kernelheader_addr_r};" \
+ "bootm $load_addr#$board\0" \
+ "emmc_hdploadcmd=echo Trying load HDP firmware from EMMC..;" \
+ "mmc dev 1;mmcinfo;mmc read $load_addr 0x4a00 0x200 " \
+ "&& hdp load $load_addr 0x2000\0"
+#endif
#endif /* __LS1028A_RDB_H */
generated by cgit (git 2.34.1) at 2024-12-23 12:40:23 +0000