diff options
Diffstat (limited to 'include/configs')
| -rw-r--r-- | include/configs/M5329EVB.h | 69 |
1 files changed, 32 insertions, 37 deletions
diff --git a/include/configs/M5329EVB.h b/include/configs/M5329EVB.h index 6a7e052a05..d3b160505b 100644 --- a/include/configs/M5329EVB.h +++ b/include/configs/M5329EVB.h @@ -47,25 +47,23 @@ #undef CONFIG_WATCHDOG #define CONFIG_WATCHDOG_TIMEOUT 5000 /* timeout in milliseconds, max timeout is 6.71sec */ -#define DEFAULT_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_CACHE | \ - CFG_CMD_DATE | \ - CFG_CMD_ELF | \ - CFG_CMD_FLASH | \ - CFG_CMD_I2C | \ - (CFG_CMD_LOADB | CFG_CMD_LOADS) | \ - CFG_CMD_MEMORY | \ - CFG_CMD_MISC | \ - CFG_CMD_MII | \ - CFG_CMD_NET | \ - CFG_CMD_PING | \ - CFG_CMD_REGINFO \ - ) +/* Command line configuration */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_DATE +#define CONFIG_CMD_ELF +#define CONFIG_CMD_FLASH +#define CONFIG_CMD_I2C +#define CONFIG_CMD_MEMORY +#define CONFIG_CMD_MISC +#define CONFIG_CMD_MII +#define CONFIG_CMD_NET +#define CONFIG_CMD_PING +#define CONFIG_CMD_REGINFO #ifdef NANDFLASH_SIZE -# define CONFIG_COMMANDS (DEFAULT_COMMANDS | CFG_CMD_NAND) -#else -# define CONFIG_COMMANDS (DEFAULT_COMMANDS) +# define CONFIG_CMD_NAND #endif #define CFG_UNIFY_CACHE @@ -108,9 +106,9 @@ #define CFG_I2C_OFFSET 0x58000 #define CFG_IMMR CFG_MBAR -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> #define CONFIG_BOOTDELAY 1 /* autoboot after 5 seconds */ +#define CONFIG_UDP_CHECKSUM + #ifdef CONFIG_MCFFEC # define CONFIG_ETHADDR 00:e0:0c:bc:e5:60 # define CONFIG_IPADDR 192.162.1.2 @@ -137,7 +135,7 @@ #define CFG_PROMPT "-> " #define CFG_LONGHELP /* undef to save memory */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#ifdef CONFIG_CMD_KGDB # define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else # define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -154,7 +152,7 @@ #define CFG_MBAR 0xFC000000 -#define CFG_LATCH_ADDR (CFG_CS1_BASE + 0x80000) +#define CFG_LATCH_ADDR (CFG_CS1_BASE + 0x80000) /* * Low Level Configuration Settings @@ -168,7 +166,7 @@ #define CFG_INIT_RAM_END 0x8000 /* End of used area in internal SRAM */ #define CFG_INIT_RAM_CTRL 0x221 #define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_GBL_DATA_OFFSET ((CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) - 0x10) #define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET /*----------------------------------------------------------------------- @@ -198,7 +196,7 @@ * have to be in the first 8 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization ?? */ -#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ +#define CFG_BOOTMAPSZ (CFG_SDRAM_BASE + (CFG_SDRAM_SIZE << 20)) /*----------------------------------------------------------------------- * FLASH organization @@ -214,20 +212,19 @@ #endif #ifdef NANDFLASH_SIZE -# define CFG_MAX_NAND_DEVICE 1 -# define CFG_NAND_BASE (CFG_CS2_BASE << 16) -# define CFG_NAND_SIZE 1 -# define CFG_NAND_BASE_LIST { CFG_NAND_BASE } -# define NAND_MAX_CHIPS 1 -# define NAND_ALLOW_ERASE_ALL 1 -# define CONFIG_JFFS2_NAND 1 -# define CONFIG_JFFS2_DEV "nand0" -# define CONFIG_JFFS2_PART_SIZE (CFG_CS2_MASK & ~1) -# define CONFIG_JFFS2_PART_OFFSET 0x00000000 +# define CFG_MAX_NAND_DEVICE 1 +# define CFG_NAND_BASE (CFG_CS2_BASE << 16) +# define CFG_NAND_SIZE 1 +# define CFG_NAND_BASE_LIST { CFG_NAND_BASE } +# define NAND_MAX_CHIPS 1 +# define NAND_ALLOW_ERASE_ALL 1 +# define CONFIG_JFFS2_NAND 1 +# define CONFIG_JFFS2_DEV "nand0" +# define CONFIG_JFFS2_PART_SIZE (CFG_CS2_MASK & ~1) +# define CONFIG_JFFS2_PART_OFFSET 0x00000000 #endif -#define CFG_FLASH_BASE 0 -#define CFG_FLASH0_BASE (CFG_CS0_BASE << 16) +#define CFG_FLASH_BASE (CFG_CS0_BASE << 16) /* Configuration for environment * Environment is embedded in u-boot in the second sector of the flash @@ -267,6 +264,4 @@ #define CFG_CS2_CTRL 0x00001f60 #endif -#define CONFIG_UDP_CHECKSUM - #endif /* _M5329EVB_H */ |