6 files changed, 41 insertions, 4 deletions
diff --git a/include/configs/corvus.h b/include/configs/corvus.h
index 5b50c1d6dd..ace511f765 100644
--- a/include/configs/corvus.h
+++ b/include/configs/corvus.h
@@ -18,6 +18,7 @@
 
 #define MACH_TYPE_CORVUS               2066
 
+#define CONFIG_MACH_TYPE		MACH_TYPE_CORVUS
 #define CONFIG_SYS_GENERIC_BOARD
 /*
  * Warning: changing CONFIG_SYS_TEXT_BASE requires
@@ -106,6 +107,7 @@
 /* our CLE is AD22 */
 #define CONFIG_SYS_NAND_MASK_CLE		(1 << 22)
 #define CONFIG_SYS_NAND_ENABLE_PIN		AT91_PIN_PC14
+#define CONFIG_SYS_NAND_READY_PIN		AT91_PIN_PC8
 #endif
 
 /* Ethernet */
@@ -171,7 +173,6 @@
 
 #define CONFIG_SPL_BOARD_INIT
 #define CONFIG_SPL_GPIO_SUPPORT
-#define CONFIG_SYS_NAND_ENABLE_PIN_SPL	(2*32 + 14)
 #define CONFIG_SPL_NAND_SUPPORT
 #define CONFIG_SPL_NAND_DRIVERS
 #define CONFIG_SPL_NAND_BASE
@@ -184,7 +185,6 @@
 #define CONFIG_SYS_NAND_U_BOOT_DST	CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 
-#define CONFIG_SYS_NAND_SIZE		(256*1024*1024)
 #define CONFIG_SYS_NAND_PAGE_SIZE	2048
 #define CONFIG_SYS_NAND_BLOCK_SIZE	(128*1024)
 #define CONFIG_SYS_NAND_PAGE_COUNT	(CONFIG_SYS_NAND_BLOCK_SIZE / \
diff --git a/include/configs/sama5d3_xplained.h b/include/configs/sama5d3_xplained.h
index d5588b1241..9458047c06 100644
--- a/include/configs/sama5d3_xplained.h
+++ b/include/configs/sama5d3_xplained.h
@@ -246,6 +246,7 @@
 #define CONFIG_SYS_NAND_OOBSIZE		64
 #define CONFIG_SYS_NAND_BLOCK_SIZE	0x20000
 #define CONFIG_SYS_NAND_BAD_BLOCK_POS	0x0
+#define CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER
 
 #endif
 
diff --git a/include/configs/sama5d4_xplained.h b/include/configs/sama5d4_xplained.h
index 104edef102..996973d99b 100644
--- a/include/configs/sama5d4_xplained.h
+++ b/include/configs/sama5d4_xplained.h
@@ -121,6 +121,14 @@
 #define CONFIG_USB_STORAGE
 #endif
 
+/* USB device */
+#define CONFIG_USB_GADGET
+#define CONFIG_USB_GADGET_DUALSPEED
+#define CONFIG_USB_GADGET_ATMEL_USBA
+#define CONFIG_USB_ETHER
+#define CONFIG_USB_ETH_RNDIS
+#define CONFIG_USBNET_MANUFACTURER      "Atmel SAMA5D4EK"
+
 #if defined(CONFIG_CMD_USB) || defined(CONFIG_CMD_MMC)
 #define CONFIG_CMD_FAT
 #define CONFIG_DOS_PARTITION
diff --git a/include/configs/sama5d4ek.h b/include/configs/sama5d4ek.h
index cbdb3a2943..09ab4d7f25 100644
--- a/include/configs/sama5d4ek.h
+++ b/include/configs/sama5d4ek.h
@@ -121,6 +121,14 @@
 #define CONFIG_USB_STORAGE
 #endif
 
+/* USB device */
+#define CONFIG_USB_GADGET
+#define CONFIG_USB_GADGET_DUALSPEED
+#define CONFIG_USB_GADGET_ATMEL_USBA
+#define CONFIG_USB_ETHER
+#define CONFIG_USB_ETH_RNDIS
+#define CONFIG_USBNET_MANUFACTURER      "Atmel SAMA5D4EK"
+
 #if defined(CONFIG_CMD_USB) || defined(CONFIG_CMD_MMC)
 #define CONFIG_CMD_FAT
 #define CONFIG_DOS_PARTITION
diff --git a/include/configs/snapper9260.h b/include/configs/snapper9260.h
index 942af2e7f6..9fa644f7c2 100644
--- a/include/configs/snapper9260.h
+++ b/include/configs/snapper9260.h
@@ -34,7 +34,6 @@
 #define CONFIG_SETUP_MEMORY_TAGS
 #define CONFIG_INITRD_TAG
 #define CONFIG_SKIP_LOWLEVEL_INIT
-#define CONFIG_SKIP_RELOCATE_UBOOT
 #define CONFIG_DISPLAY_CPUINFO
 #define CONFIG_FIT
 
diff --git a/include/configs/taurus.h b/include/configs/taurus.h
index 20194aebb5..65468ad165 100644
--- a/include/configs/taurus.h
+++ b/include/configs/taurus.h
@@ -26,6 +26,11 @@
 
 #define CONFIG_SYS_GENERIC_BOARD
 
+#if defined(CONFIG_SPL_BUILD)
+#define CONFIG_SYS_THUMB_BUILD
+#define CONFIG_SYS_ICACHE_OFF
+#define CONFIG_SYS_DCACHE_OFF
+#endif
 /*
  * Warning: changing CONFIG_SYS_TEXT_BASE requires
  * adapting the initial boot program.
@@ -137,6 +142,19 @@
 #define TAURUS_SPI_MASK (1 << 4)
 #define TAURUS_SPI_CS_PIN	AT91_PIN_PA3
 
+#if defined(CONFIG_SPL_BUILD)
+/* SPL related */
+#undef CONFIG_SPL_OS_BOOT		/* Not supported by existing map */
+#define CONFIG_SPL_SPI_SUPPORT
+#define CONFIG_SPL_SPI_FLASH_SUPPORT
+#define CONFIG_SPL_SPI_LOAD
+#define CONFIG_SYS_SPI_U_BOOT_OFFS	0x20000
+
+#define CONFIG_SF_DEFAULT_BUS 0
+#define CONFIG_SF_DEFAULT_SPEED 10000000
+#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
+#endif
+
 /* load address */
 #define CONFIG_SYS_LOAD_ADDR			0x22000000
 
@@ -171,8 +189,11 @@
 /* Defines for SPL */
 #define CONFIG_SPL_FRAMEWORK
 #define CONFIG_SPL_TEXT_BASE		0x0
-#define CONFIG_SPL_MAX_SIZE		(11 * 1024)
+#define CONFIG_SPL_MAX_SIZE		(14 * 1024)
 #define CONFIG_SPL_STACK		(16 * 1024)
+#define CONFIG_SYS_SPL_MALLOC_START     (CONFIG_SYS_TEXT_BASE - \
+					CONFIG_SYS_MALLOC_LEN)
+#define CONFIG_SYS_SPL_MALLOC_SIZE      CONFIG_SYS_MALLOC_LEN
 
 #define CONFIG_SPL_BSS_START_ADDR	CONFIG_SPL_MAX_SIZE
 #define CONFIG_SPL_BSS_MAX_SIZE		(3 * 1024)