summaryrefslogtreecommitdiff
path: root/include/configs
diff options
context:
space:
mode:
Diffstat (limited to 'include/configs')
-rw-r--r--include/configs/am335x_guardian.h43
-rw-r--r--include/configs/apalis_imx6.h2
-rw-r--r--include/configs/colibri-imx6ull.h2
-rw-r--r--include/configs/colibri_imx6.h2
-rw-r--r--include/configs/colibri_imx7.h2
-rw-r--r--include/configs/colibri_vf.h2
-rw-r--r--include/configs/imxrt1020-evk.h46
-rw-r--r--include/configs/imxrt1050-evk.h15
-rw-r--r--include/configs/mx6ul_14x14_evk.h1
-rw-r--r--include/configs/mx6ullevk.h9
-rw-r--r--include/configs/sbc8548.h2
-rw-r--r--include/configs/tqma6.h9
-rw-r--r--include/configs/tqma6_wru4.h3
-rw-r--r--include/configs/verdin-imx8mm.h6
14 files changed, 119 insertions, 25 deletions
diff --git a/include/configs/am335x_guardian.h b/include/configs/am335x_guardian.h
index 0e20d6c728..c34c07a493 100644
--- a/include/configs/am335x_guardian.h
+++ b/include/configs/am335x_guardian.h
@@ -34,23 +34,49 @@
"ramdisk_addr_r=0x88080000\0" \
#define BOOT_TARGET_DEVICES(func) \
- func(UBIFS, ubifs, 0) \
- func(PXE, pxe, na) \
- func(DHCP, dhcp, na)
+ func(UBIFS, ubifs, 0)
#define AM335XX_BOARD_FDTFILE "fdtfile=" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0"
#include <config_distro_bootcmd.h>
+#define GUARDIAN_DEFAULT_PROD_ENV \
+ "factory_assembly_status=0\0" \
+ "main_pcba_part_number=0\0" \
+ "main_pcba_supplier=0\0" \
+ "main_pcba_timestamp=0\0" \
+ "main_pcba_hardware_version=0\0" \
+ "main_pcba_id=0\0" \
+ "main_pcba_aux_1=0\0" \
+ "main_pcba_aux_2=0\0" \
+ "main_pcba_aux_3=0\0" \
+ "main_pcba_aux_4=0\0" \
+
#define CONFIG_EXTRA_ENV_SETTINGS \
AM335XX_BOARD_FDTFILE \
MEM_LAYOUT_ENV_SETTINGS \
BOOTENV \
- "bootlimit=3\0" \
+ GUARDIAN_DEFAULT_PROD_ENV \
"bootubivol=rootfs\0" \
+ "distro_bootcmd=" \
+ "setenv autoload no; " \
+ "setenv rootflags \"bulk_read,chk_data_crc\"; " \
+ "setenv ethact usb_ether; " \
+ "if test \"${swi_status}\" -eq 1; then " \
+ "setenv extrabootargs \"swi_attached\"; " \
+ "if dhcp; then " \
+ "sleep 1; " \
+ "if tftp \"${tftp_load_addr}\" \"bootscript.scr\"; then " \
+ "source \"${tftp_load_addr}\"; " \
+ "fi; " \
+ "fi; " \
+ "fi;" \
+ "run bootcmd_ubifs0;\0" \
"altbootcmd=" \
- "setenv boot_config \"extlinux-rollback.conf\"; " \
- "run distro_bootcmd\0"
+ "setenv boot_syslinux_conf \"extlinux/extlinux-rollback.conf\"; " \
+ "run distro_bootcmd; " \
+ "setenv boot_syslinux_conf \"extlinux/extlinux.conf\"; " \
+ "run bootcmd_ubifs0;\0"
#endif /* ! CONFIG_SPL_BUILD */
@@ -109,4 +135,9 @@
#endif /* CONFIG_MTD_RAW_NAND */
+#define CONFIG_AM335X_USB0
+#define CONFIG_AM335X_USB0_MODE MUSB_PERIPHERAL
+#define CONFIG_AM335X_USB1
+#define CONFIG_AM335X_USB1_MODE MUSB_HOST
+
#endif /* ! __CONFIG_AM335X_GUARDIAN_H */
diff --git a/include/configs/apalis_imx6.h b/include/configs/apalis_imx6.h
index d2ff7e9534..fb0037444f 100644
--- a/include/configs/apalis_imx6.h
+++ b/include/configs/apalis_imx6.h
@@ -146,8 +146,6 @@
#define MEM_LAYOUT_ENV_SETTINGS \
"bootm_size=0x20000000\0" \
"fdt_addr_r=0x12100000\0" \
- "fdt_high=0xffffffff\0" \
- "initrd_high=0xffffffff\0" \
"kernel_addr_r=0x11000000\0" \
"pxefile_addr_r=0x17100000\0" \
"ramdisk_addr_r=0x12200000\0" \
diff --git a/include/configs/colibri-imx6ull.h b/include/configs/colibri-imx6ull.h
index ea5ba6bfce..2a76f576a8 100644
--- a/include/configs/colibri-imx6ull.h
+++ b/include/configs/colibri-imx6ull.h
@@ -40,8 +40,6 @@
#define MEM_LAYOUT_ENV_SETTINGS \
"bootm_size=0x10000000\0" \
"fdt_addr_r=0x82100000\0" \
- "fdt_high=0xffffffff\0" \
- "initrd_high=0xffffffff\0" \
"kernel_addr_r=0x81000000\0" \
"pxefile_addr_r=0x87100000\0" \
"ramdisk_addr_r=0x82200000\0" \
diff --git a/include/configs/colibri_imx6.h b/include/configs/colibri_imx6.h
index cbc7501bcc..4cdd3c53af 100644
--- a/include/configs/colibri_imx6.h
+++ b/include/configs/colibri_imx6.h
@@ -134,8 +134,6 @@
#define MEM_LAYOUT_ENV_SETTINGS \
"bootm_size=0x10000000\0" \
"fdt_addr_r=0x12100000\0" \
- "fdt_high=0xffffffff\0" \
- "initrd_high=0xffffffff\0" \
"kernel_addr_r=0x11000000\0" \
"pxefile_addr_r=0x17100000\0" \
"ramdisk_addr_r=0x12200000\0" \
diff --git a/include/configs/colibri_imx7.h b/include/configs/colibri_imx7.h
index 603ea3a053..7c00f78ef1 100644
--- a/include/configs/colibri_imx7.h
+++ b/include/configs/colibri_imx7.h
@@ -108,8 +108,6 @@
#define MEM_LAYOUT_ENV_SETTINGS \
"bootm_size=0x10000000\0" \
"fdt_addr_r=0x82000000\0" \
- "fdt_high=0xffffffff\0" \
- "initrd_high=0xffffffff\0" \
"kernel_addr_r=0x81000000\0" \
"ramdisk_addr_r=0x82100000\0" \
"scriptaddr=0x82500000\0"
diff --git a/include/configs/colibri_vf.h b/include/configs/colibri_vf.h
index 1478ea844e..b03ccaf094 100644
--- a/include/configs/colibri_vf.h
+++ b/include/configs/colibri_vf.h
@@ -51,8 +51,6 @@
#define MEM_LAYOUT_ENV_SETTINGS \
"bootm_size=0x10000000\0" \
"fdt_addr_r=0x82000000\0" \
- "fdt_high=0xffffffff\0" \
- "initrd_high=0xffffffff\0" \
"kernel_addr_r=0x81000000\0" \
"pxefile_addr_r=0x87100000\0" \
"ramdisk_addr_r=0x82100000\0" \
diff --git a/include/configs/imxrt1020-evk.h b/include/configs/imxrt1020-evk.h
new file mode 100644
index 0000000000..8e54565f1a
--- /dev/null
+++ b/include/configs/imxrt1020-evk.h
@@ -0,0 +1,46 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2020
+ * Author(s): Giulio Benetti <giulio.benetti@benettiengineering.com>
+ */
+
+#ifndef __IMXRT1020_EVK_H
+#define __IMXRT1020_EVK_H
+
+#include <asm/arch/imx-regs.h>
+
+#define CONFIG_SYS_INIT_SP_ADDR 0x20240000
+
+#ifdef CONFIG_SUPPORT_SPL
+#define CONFIG_SYS_LOAD_ADDR 0x20209000
+#else
+#define CONFIG_SYS_LOAD_ADDR 0x80000000
+#define CONFIG_LOADADDR 0x80000000
+#endif
+
+#define CONFIG_SYS_FSL_ERRATUM_ESDHC135 1
+#define ESDHCI_QUIRK_BROKEN_TIMEOUT_VALUE 1
+
+#define PHYS_SDRAM 0x80000000
+#define PHYS_SDRAM_SIZE (32 * 1024 * 1024)
+
+#define DMAMEM_SZ_ALL (1 * 1024 * 1024)
+#define DMAMEM_BASE (PHYS_SDRAM + PHYS_SDRAM_SIZE - \
+ DMAMEM_SZ_ALL)
+
+#define CONFIG_SYS_MMC_ENV_DEV 0 /* USDHC1 */
+
+/*
+ * Configuration of the external SDRAM memory
+ */
+#define CONFIG_SYS_MALLOC_LEN (1 * 1024 * 1024)
+
+/* For SPL */
+#ifdef CONFIG_SUPPORT_SPL
+#define CONFIG_SPL_STACK CONFIG_SYS_INIT_SP_ADDR
+#define CONFIG_SYS_SPL_LEN 0x00008000
+#define CONFIG_SYS_UBOOT_START 0x800023FD
+#endif
+/* For SPL ends */
+
+#endif /* __IMXRT1020_EVK_H */
diff --git a/include/configs/imxrt1050-evk.h b/include/configs/imxrt1050-evk.h
index cdec657fb0..3a6b972d9a 100644
--- a/include/configs/imxrt1050-evk.h
+++ b/include/configs/imxrt1050-evk.h
@@ -30,6 +30,21 @@
#define CONFIG_SYS_MMC_ENV_DEV 0 /* USDHC1 */
+#ifdef CONFIG_DM_VIDEO
+#define CONFIG_VIDEO_MXS
+#define CONFIG_VIDEO_LOGO
+#define CONFIG_SPLASH_SCREEN
+#define CONFIG_SPLASH_SCREEN_ALIGN
+#define CONFIG_BMP_16BPP
+#define CONFIG_VIDEO_BMP_RLE8
+#define CONFIG_VIDEO_BMP_LOGO
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "stdin=serial\0" \
+ "stdout=serial,vidconsole\0" \
+ "stderr=serial,vidconsole\0"
+#endif
+
/*
* Configuration of the external SDRAM memory
*/
diff --git a/include/configs/mx6ul_14x14_evk.h b/include/configs/mx6ul_14x14_evk.h
index f347eeb39f..a30d2c0879 100644
--- a/include/configs/mx6ul_14x14_evk.h
+++ b/include/configs/mx6ul_14x14_evk.h
@@ -172,7 +172,6 @@
#endif
#ifdef CONFIG_CMD_NET
-#define CONFIG_FEC_MXC
#define CONFIG_FEC_ENET_DEV 1
#if (CONFIG_FEC_ENET_DEV == 0)
diff --git a/include/configs/mx6ullevk.h b/include/configs/mx6ullevk.h
index 7cce911314..af335bcfff 100644
--- a/include/configs/mx6ullevk.h
+++ b/include/configs/mx6ullevk.h
@@ -166,4 +166,13 @@
#define FSL_QSPI_FLASH_SIZE SZ_32M
#endif
+#ifdef CONFIG_CMD_NET
+#define CONFIG_FEC_ENET_DEV 1
+#if (CONFIG_FEC_ENET_DEV == 0)
+#define CONFIG_ETHPRIME "eth0"
+#elif (CONFIG_FEC_ENET_DEV == 1)
+#define CONFIG_ETHPRIME "eth1"
+#endif
+#endif
+
#endif
diff --git a/include/configs/sbc8548.h b/include/configs/sbc8548.h
index f4113e03c4..ae2c0033d0 100644
--- a/include/configs/sbc8548.h
+++ b/include/configs/sbc8548.h
@@ -7,7 +7,7 @@
/*
* sbc8548 board configuration file
- * Please refer to doc/README.sbc8548 for more info.
+ * Please refer to board/sbc8548/README for more info.
*/
#ifndef __CONFIG_H
#define __CONFIG_H
diff --git a/include/configs/tqma6.h b/include/configs/tqma6.h
index 1ea6332878..895cd0324e 100644
--- a/include/configs/tqma6.h
+++ b/include/configs/tqma6.h
@@ -28,18 +28,11 @@
#define PHYS_SDRAM_SIZE (SZ_1G)
#endif
-#define CONFIG_MXC_UART
-
/* SPI Flash */
#define TQMA6_SPI_FLASH_SECTOR_SIZE SZ_64K
/* I2C Configs */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_MXC
-#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
-#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
-#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
#define CONFIG_I2C_MULTI_BUS
#define CONFIG_SYS_I2C_SPEED 100000
@@ -49,11 +42,13 @@
#define CONFIG_SYS_I2C_EEPROM_PAGE_WRITE_BITS 5 /* 32 Bytes */
#define CONFIG_SYS_I2C_EEPROM_PAGE_WRITE_DELAY_MS 20
+#if !defined(CONFIG_DM_PMIC)
#define CONFIG_POWER
#define CONFIG_POWER_I2C
#define CONFIG_POWER_PFUZE100
#define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08
#define TQMA6_PFUZE100_I2C_BUS 2
+#endif
/* MMC Configs */
#define CONFIG_SYS_FSL_ESDHC_ADDR 0
diff --git a/include/configs/tqma6_wru4.h b/include/configs/tqma6_wru4.h
index 0af52e5565..13b87e9b52 100644
--- a/include/configs/tqma6_wru4.h
+++ b/include/configs/tqma6_wru4.h
@@ -30,4 +30,7 @@
/* Bootcounter */
#define CONFIG_SYS_BOOTCOUNT_BE
+/* I2C */
+#define CONFIG_SYS_I2C
+
#endif /* __CONFIG_TQMA6_WRU4_H */
diff --git a/include/configs/verdin-imx8mm.h b/include/configs/verdin-imx8mm.h
index dc0a2efec6..82bff3608c 100644
--- a/include/configs/verdin-imx8mm.h
+++ b/include/configs/verdin-imx8mm.h
@@ -66,6 +66,12 @@
"initrd_addr=0x43800000\0" \
"initrd_high=0xffffffffffffffff\0" \
"kernel_image=Image\0" \
+ "netargs=setenv bootargs console=${console},${baudrate} " \
+ "root=/dev/nfs ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp" \
+ "\0" \
+ "nfsboot=run netargs; dhcp ${loadaddr} ${kernel_image}; " \
+ "tftp ${fdt_addr} verdin/${fdtfile}; " \
+ "booti ${loadaddr} - ${fdt_addr}\0" \
"setup=setenv setupargs console=${console},${baudrate} " \
"console=tty1 consoleblank=0 earlycon\0" \
"update_uboot=askenv confirm Did you load flash.bin (y/N)?; " \
generated by cgit (git 2.34.1) at 2024-12-25 19:29:39 +0000