diff options
Diffstat (limited to 'include/configs')
27 files changed, 295 insertions, 304 deletions
diff --git a/include/configs/T4240RDB.h b/include/configs/T4240RDB.h index eb4d52c6f5..c1a0a6ced9 100644 --- a/include/configs/T4240RDB.h +++ b/include/configs/T4240RDB.h @@ -606,6 +606,16 @@ unsigned long get_board_ddr_clk(void); #define I2C_VOL_MONITOR_BUS_V_OVF 0x1 #define I2C_VOL_MONITOR_BUS_V_SHIFT 3 +#define CONFIG_VID_FLS_ENV "t4240rdb_vdd_mv" +#ifndef CONFIG_SPL_BUILD +#define CONFIG_VID +#endif +#define CONFIG_VOL_MONITOR_IR36021_SET +#define CONFIG_VOL_MONITOR_IR36021_READ +/* The lowest and highest voltage allowed for T4240RDB */ +#define VDD_MV_MIN 819 +#define VDD_MV_MAX 1212 + /* * eSPI - Enhanced SPI */ diff --git a/include/configs/chromebook_jerry.h b/include/configs/chromebook_jerry.h index 150e8765d6..67f45c0f90 100644 --- a/include/configs/chromebook_jerry.h +++ b/include/configs/chromebook_jerry.h @@ -30,7 +30,6 @@ #define CONFIG_SPL_POWER_SUPPORT #define CONFIG_SPL_I2C_SUPPORT -#define CONFIG_I2C_EDID #define CONFIG_SYS_WHITE_ON_BLACK #define CONFIG_CONSOLE_SCROLL_LINES 10 diff --git a/include/configs/firefly-rk3288.h b/include/configs/firefly-rk3288.h index d6423e7e55..a29f55709d 100644 --- a/include/configs/firefly-rk3288.h +++ b/include/configs/firefly-rk3288.h @@ -24,7 +24,6 @@ */ #define CONFIG_ENV_OFFSET (96 * 1024) -#define CONFIG_I2C_EDID #define CONFIG_SYS_WHITE_ON_BLACK #define CONFIG_CONSOLE_SCROLL_LINES 10 diff --git a/include/configs/fx12mm.h b/include/configs/fx12mm.h deleted file mode 100644 index fa32a2e8cf..0000000000 --- a/include/configs/fx12mm.h +++ /dev/null @@ -1,50 +0,0 @@ -/* - * (C) Copyright 2008 - * - * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es - * This work has been supported by: QTechnology http://qtec.com - * - * Georg Schardt <schardt@team-ctech.de> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * Configuration file for the Virtex4FX12 Minimodul by Avnet/Memec, - * see http://www.em.avnet.com - */ - -#ifndef __CONFIG_FX12_H -#define __CONFIG_FX12_H - -#include "../board/avnet/fx12mm/xparameters.h" - -/* cmd config */ -#define CONFIG_CMD_JFFS2 -#define CONFIG_CMD_MTDPARTS -#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ -#define CONFIG_FLASH_CFI_MTD - -/* sdram */ -#define CONFIG_SYS_SDRAM_SIZE_MB 64 - -/* environment */ -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_SIZE 0x10000 -#define CONFIG_ENV_SECT_SIZE 0x10000 -#define CONFIG_SYS_ENV_OFFSET 0xA0000 -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE+CONFIG_SYS_ENV_OFFSET) -#define CONFIG_ENV_OVERWRITE 1 - -/*Misc*/ -#define CONFIG_PREBOOT "echo U-Boot is up and running;" - -/*Flash*/ -#define CONFIG_SYS_FLASH_SIZE (4*1024*1024) -#define CONFIG_SYS_MAX_FLASH_SECT 71 -#define MTDIDS_DEFAULT "nor0=fx12mm-flash" -#define MTDPARTS_DEFAULT "mtdparts=fx12mm-flash:-(user)" - -#include "configs/xilinx-ppc405.h" - -#endif /* __CONFIG_H */ diff --git a/include/configs/imx6_spl.h b/include/configs/imx6_spl.h index 43ce7fe25f..68d3fd7384 100644 --- a/include/configs/imx6_spl.h +++ b/include/configs/imx6_spl.h @@ -34,6 +34,7 @@ #define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_I2C_SUPPORT #define CONFIG_SPL_GPIO_SUPPORT +#define CONFIG_SPL_WATCHDOG_SUPPORT /* NAND support */ #if defined(CONFIG_SPL_NAND_SUPPORT) diff --git a/include/configs/microblaze-generic.h b/include/configs/microblaze-generic.h index f93861d770..97a0d86b91 100644 --- a/include/configs/microblaze-generic.h +++ b/include/configs/microblaze-generic.h @@ -32,54 +32,20 @@ #endif /* uart */ -#ifdef XILINX_UARTLITE_BASEADDR -# define CONFIG_XILINX_UARTLITE -# define CONFIG_SERIAL_BASE XILINX_UARTLITE_BASEADDR -# define CONFIG_BAUDRATE XILINX_UARTLITE_BAUDRATE -# define CONFIG_SYS_BAUDRATE_TABLE { CONFIG_BAUDRATE } -# define CONSOLE_ARG "console=console=ttyUL0,115200\0" -#elif XILINX_UART16550_BASEADDR -# define CONFIG_SYS_NS16550_SERIAL -# if defined(__MICROBLAZEEL__) -# define CONFIG_SYS_NS16550_REG_SIZE -4 -# else -# define CONFIG_SYS_NS16550_REG_SIZE 4 -# endif -# define CONFIG_CONS_INDEX 1 -# define CONFIG_SYS_NS16550_COM1 \ - ((XILINX_UART16550_BASEADDR & ~0xF) + 0x1000) -# define CONFIG_SYS_NS16550_CLK XILINX_UART16550_CLOCK_HZ # define CONFIG_BAUDRATE 115200 - /* The following table includes the supported baudrates */ # define CONFIG_SYS_BAUDRATE_TABLE \ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400} -# define CONSOLE_ARG "console=console=ttyS0,115200\0" -#else -# error Undefined uart -#endif /* setting reset address */ /*#define CONFIG_SYS_RESET_ADDRESS CONFIG_SYS_TEXT_BASE*/ -/* ethernet */ -#undef CONFIG_SYS_ENET -#if defined(XILINX_EMACLITE_BASEADDR) || defined(CONFIG_OF_CONTROL) -# define CONFIG_XILINX_EMACLITE 1 -# define CONFIG_SYS_ENET -#endif -#if defined(XILINX_AXIEMAC_BASEADDR) -# define CONFIG_XILINX_AXIEMAC 1 -# define CONFIG_SYS_ENET -#endif - -#undef ET_DEBUG - /* gpio */ #ifdef XILINX_GPIO_BASEADDR # define CONFIG_XILINX_GPIO # define CONFIG_SYS_GPIO_0_ADDR XILINX_GPIO_BASEADDR #endif +#define CONFIG_BOARD_LATE_INIT /* interrupt controller */ #ifdef XILINX_INTC_BASEADDR @@ -103,13 +69,6 @@ # endif #endif -#if !defined(CONFIG_OF_CONTROL) || \ - (defined(CONFIG_SPL_BUILD) && !defined(CONFIG_SPL_OF_CONTROL)) -/* ddr sdram - main memory */ -# define CONFIG_SYS_SDRAM_BASE XILINX_RAM_START -# define CONFIG_SYS_SDRAM_SIZE XILINX_RAM_SIZE -#endif - #define CONFIG_SYS_MALLOC_LEN 0xC0000 /* Stack location before relocation */ @@ -198,16 +157,6 @@ #endif /* !SPIFLASH */ #endif /* !FLASH */ -/* system ace */ -#ifdef XILINX_SYSACE_BASEADDR -# define CONFIG_SYSTEMACE -/* #define DEBUG_SYSTEMACE */ -# define SYSTEMACE_CONFIG_FPGA -# define CONFIG_SYS_SYSTEMACE_BASE XILINX_SYSACE_BASEADDR -# define CONFIG_SYS_SYSTEMACE_WIDTH XILINX_SYSACE_MEM_WIDTH -# define CONFIG_DOS_PARTITION -#endif - #if defined(XILINX_USE_ICACHE) # define CONFIG_ICACHE #else @@ -245,17 +194,6 @@ # undef CONFIG_CMD_CACHE #endif -#ifdef CONFIG_SYS_ENET -# define CONFIG_CMD_PING -# define CONFIG_CMD_DHCP -# define CONFIG_CMD_TFTPPUT -#endif - -#if defined(CONFIG_SYSTEMACE) -# define CONFIG_CMD_EXT2 -# define CONFIG_CMD_FAT -#endif - #if defined(FLASH) # define CONFIG_CMD_JFFS2 # define CONFIG_CMD_UBI @@ -315,7 +253,7 @@ #define CONFIG_SYS_MAXARGS 15 #define CONFIG_SYS_LONGHELP /* default load address */ -#define CONFIG_SYS_LOAD_ADDR XILINX_RAM_START +#define CONFIG_SYS_LOAD_ADDR 0 #define CONFIG_BOOTDELAY -1 /* -1 disables auto-boot */ #define CONFIG_BOOTARGS "root=romfs" @@ -342,15 +280,10 @@ #define CONFIG_CMDLINE_EDITING -#define CONFIG_NETCONSOLE #define CONFIG_SYS_CONSOLE_IS_IN_ENV -/* Use the HUSH parser */ -#define CONFIG_SYS_HUSH_PARSER - /* Enable flat device tree support */ #define CONFIG_LMB 1 -#define CONFIG_FIT 1 #define CONFIG_OF_LIBFDT 1 #if defined(CONFIG_XILINX_AXIEMAC) @@ -358,20 +291,19 @@ # define CONFIG_CMD_MII 1 # define CONFIG_PHY_GIGE 1 # define CONFIG_SYS_FAULT_ECHO_LINK_DOWN 1 -# define CONFIG_PHYLIB 1 # define CONFIG_PHY_ATHEROS 1 # define CONFIG_PHY_BROADCOM 1 # define CONFIG_PHY_DAVICOM 1 # define CONFIG_PHY_LXT 1 # define CONFIG_PHY_MARVELL 1 # define CONFIG_PHY_MICREL 1 +# define CONFIG_PHY_MICREL_KSZ9021 # define CONFIG_PHY_NATSEMI 1 # define CONFIG_PHY_REALTEK 1 # define CONFIG_PHY_VITESSE 1 #else # undef CONFIG_MII # undef CONFIG_CMD_MII -# undef CONFIG_PHYLIB #endif /* SPL part */ diff --git a/include/configs/ml507.h b/include/configs/ml507.h deleted file mode 100644 index 89a72904b3..0000000000 --- a/include/configs/ml507.h +++ /dev/null @@ -1,38 +0,0 @@ -/* - * (C) Copyright 2008 - * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es - * This work has been supported by: QTechnology http://qtec.com/ - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/*CPU*/ -#define CONFIG_440 1 -#define CONFIG_XILINX_ML507 1 -#include "../board/xilinx/ml507/xparameters.h" - -/*Mem Map*/ -#define CONFIG_SYS_SDRAM_SIZE_MB 256 - -/*Env*/ -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_SIZE 0x20000 -#define CONFIG_ENV_SECT_SIZE 0x20000 -#define CONFIG_ENV_OFFSET 0x340000 -#define CONFIG_ENV_ADDR (XPAR_FLASH_MEM0_BASEADDR+CONFIG_ENV_OFFSET) - -/*Misc*/ -#define CONFIG_PREBOOT "echo U-Boot is up and runnining;" - -/*Flash*/ -#define CONFIG_SYS_FLASH_SIZE (32*1024*1024) -#define CONFIG_SYS_MAX_FLASH_SECT 259 -#define MTDIDS_DEFAULT "nor0=ml507-flash" -#define MTDPARTS_DEFAULT "mtdparts=ml507-flash:-(user)" - -/*Generic Configs*/ -#include <configs/xilinx-ppc440.h> - -#endif /* __CONFIG_H */ diff --git a/include/configs/mx6_common.h b/include/configs/mx6_common.h index 174ea088f3..179b4f9007 100644 --- a/include/configs/mx6_common.h +++ b/include/configs/mx6_common.h @@ -25,6 +25,8 @@ #define CONFIG_SYS_NO_FLASH +#define CONFIG_SYS_BOOTM_LEN 0x1000000 + #include <linux/sizes.h> #include <asm/arch/imx-regs.h> #include <asm/imx-common/gpio.h> diff --git a/include/configs/mx6ul_14x14_evk.h b/include/configs/mx6ul_14x14_evk.h index c946176416..4374c3a41f 100644 --- a/include/configs/mx6ul_14x14_evk.h +++ b/include/configs/mx6ul_14x14_evk.h @@ -156,7 +156,7 @@ /* Miscellaneous configurable options */ #define CONFIG_CMD_MEMTEST #define CONFIG_SYS_MEMTEST_START 0x80000000 -#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x10000000) +#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x8000000) #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR #define CONFIG_SYS_HZ 1000 @@ -203,6 +203,7 @@ #define CONFIG_SF_DEFAULT_CS 0 #define CONFIG_SF_DEFAULT_SPEED 40000000 #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 +#define CONFIG_SPI_FLASH_STMICRO #define FSL_QSPI_FLASH_NUM 1 #define FSL_QSPI_FLASH_SIZE SZ_32M #endif diff --git a/include/configs/mx7_common.h b/include/configs/mx7_common.h index d507fb48da..fac7c3f2e2 100644 --- a/include/configs/mx7_common.h +++ b/include/configs/mx7_common.h @@ -23,6 +23,8 @@ #define CONFIG_SC_TIMER_CLK 8000000 /* 8Mhz */ #define CONFIG_SYS_FSL_CLK +#define CONFIG_SYS_BOOTM_LEN 0x1000000 + /* Enable iomux-lpsr support */ #define CONFIG_IOMUX_LPSR #define CONFIG_IMX_FIXED_IVT_OFFSET diff --git a/include/configs/mx7dsabresd.h b/include/configs/mx7dsabresd.h index 22e515cccd..d23e4f3c40 100644 --- a/include/configs/mx7dsabresd.h +++ b/include/configs/mx7dsabresd.h @@ -179,8 +179,33 @@ #define CONFIG_SYS_NO_FLASH #define CONFIG_ENV_SIZE SZ_8K #define CONFIG_ENV_IS_IN_MMC + +/* + * If want to use nand, define CONFIG_NAND_MXS and rework board + * to support nand, since emmc has pin conflicts with nand + */ +#ifdef CONFIG_NAND_MXS +#define CONFIG_CMD_NAND +#define CONFIG_CMD_NAND_TRIMFFS + +/* NAND stuff */ +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_SYS_NAND_BASE 0x40000000 +#define CONFIG_SYS_NAND_5_ADDR_CYCLE +#define CONFIG_SYS_NAND_ONFI_DETECTION + +/* DMA stuff, needed for GPMI/MXS NAND support */ +#define CONFIG_APBH_DMA +#define CONFIG_APBH_DMA_BURST +#define CONFIG_APBH_DMA_BURST8 +#endif + #define CONFIG_ENV_OFFSET (8 * SZ_64K) +#ifdef CONFIG_NAND_MXS +#define CONFIG_SYS_FSL_USDHC_NUM 1 +#else #define CONFIG_SYS_FSL_USDHC_NUM 2 +#endif #define CONFIG_SYS_MMC_ENV_DEV 0 /* USDHC1 */ #define CONFIG_SYS_MMC_ENV_PART 0 /* user area */ diff --git a/include/configs/nyan-big.h b/include/configs/nyan-big.h index 9464153f58..176f6e902b 100644 --- a/include/configs/nyan-big.h +++ b/include/configs/nyan-big.h @@ -37,8 +37,6 @@ #define CONFIG_SYS_MMC_ENV_PART 2 #define CONFIG_ENV_OFFSET (-CONFIG_ENV_SIZE) -#define CONFIG_I2C_EDID - /* LCD support */ #define CONFIG_LCD #define CONFIG_PWM_TEGRA diff --git a/include/configs/omap3_igep00x0.h b/include/configs/omap3_igep00x0.h index 5da6cfd6f5..5e33845da0 100644 --- a/include/configs/omap3_igep00x0.h +++ b/include/configs/omap3_igep00x0.h @@ -19,8 +19,6 @@ #include <configs/ti_omap3_common.h> #include <asm/mach-types.h> -#undef CONFIG_BOOTDELAY - /* * Display CPU and Board information */ diff --git a/include/configs/omap3_logic.h b/include/configs/omap3_logic.h index 7b60f29bd2..e9ce3f6d1c 100644 --- a/include/configs/omap3_logic.h +++ b/include/configs/omap3_logic.h @@ -50,6 +50,9 @@ * Hardware drivers */ +/* GPIO banks */ +#define CONFIG_OMAP3_GPIO_6 /* GPIO160..191 is in GPIO bank 6 */ + /* * select serial console configuration */ diff --git a/include/configs/qemu-x86.h b/include/configs/qemu-x86.h index 4258dcb7f6..b0d2ffe5b4 100644 --- a/include/configs/qemu-x86.h +++ b/include/configs/qemu-x86.h @@ -14,7 +14,6 @@ #include <configs/x86-common.h> #define CONFIG_SYS_MONITOR_LEN (1 << 20) -#define CONFIG_ARCH_MISC_INIT #define CONFIG_ARCH_EARLY_INIT_R #define CONFIG_PCI_PNP diff --git a/include/configs/rock2.h b/include/configs/rock2.h index d6423e7e55..a29f55709d 100644 --- a/include/configs/rock2.h +++ b/include/configs/rock2.h @@ -24,7 +24,6 @@ */ #define CONFIG_ENV_OFFSET (96 * 1024) -#define CONFIG_I2C_EDID #define CONFIG_SYS_WHITE_ON_BLACK #define CONFIG_CONSOLE_SCROLL_LINES 10 diff --git a/include/configs/rpi-common.h b/include/configs/rpi-common.h index 1b83eb36a7..927bae78eb 100644 --- a/include/configs/rpi-common.h +++ b/include/configs/rpi-common.h @@ -88,6 +88,9 @@ #define CONFIG_USB_HOST_ETHER #define CONFIG_USB_ETHER_SMSC95XX #define CONFIG_MISC_INIT_R +#define CONFIG_USB_KEYBOARD +#define CONFIG_SYS_USB_EVENT_POLL +#define CONFIG_SYS_STDIO_DEREGISTER #endif /* Console UART */ @@ -111,6 +114,7 @@ #define CONFIG_SYS_LOAD_ADDR 0x1000000 #define CONFIG_CONSOLE_MUX #define CONFIG_SYS_CONSOLE_IS_IN_ENV +#define CONFIG_PREBOOT "usb start" /* Shell */ #define CONFIG_SYS_MAXARGS 8 @@ -133,7 +137,7 @@ /* Environment */ #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG #define ENV_DEVICE_SETTINGS \ - "stdin=serial,lcd\0" \ + "stdin=serial,usbkbd\0" \ "stdout=serial,lcd\0" \ "stderr=serial,lcd\0" diff --git a/include/configs/theadorable.h b/include/configs/theadorable.h new file mode 100644 index 0000000000..cd9d6b693b --- /dev/null +++ b/include/configs/theadorable.h @@ -0,0 +1,170 @@ +/* + * Copyright (C) 2015-2016 Stefan Roese <sr@denx.de> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _CONFIG_THEADORABLE_H +#define _CONFIG_THEADORABLE_H + +/* + * High Level Configuration Options (easy to change) + */ +#define CONFIG_DISPLAY_BOARDINFO_LATE + +/* + * TEXT_BASE needs to be below 16MiB, since this area is scrubbed + * for DDR ECC byte filling in the SPL before loading the main + * U-Boot into it. + */ +#define CONFIG_SYS_TEXT_BASE 0x00800000 +#define CONFIG_SYS_TCLK 250000000 /* 250MHz */ + +/* + * Commands configuration + */ +#define CONFIG_CMD_BOOTZ +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_ENV +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_EXT4 +#define CONFIG_CMD_FAT +#define CONFIG_CMD_FS_GENERIC +#define CONFIG_CMD_I2C +#define CONFIG_CMD_SATA +#define CONFIG_CMD_TIME + +/* + * The debugging version enables USB support via defconfig. + * This version should also enable all other non-production + * interfaces / features. + */ +#ifdef CONFIG_USB +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_PCI +#define CONFIG_CMD_PING +#define CONFIG_CMD_SPI +#define CONFIG_CMD_TFTPPUT +#endif + +/* I2C */ +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_MVTWSI +#define CONFIG_I2C_MVTWSI_BASE0 MVEBU_TWSI_BASE +#define CONFIG_SYS_I2C_SLAVE 0x0 +#define CONFIG_SYS_I2C_SPEED 100000 + +/* USB/EHCI configuration */ +#define CONFIG_EHCI_IS_TDI +#define CONFIG_USB_MAX_CONTROLLER_COUNT 3 + +#define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ + +/* SPI NOR flash default params, used by sf commands */ +#define CONFIG_SF_DEFAULT_SPEED 27777777 /* for fast SPL booting */ +#define CONFIG_SF_DEFAULT_MODE SPI_MODE_3 + +/* Environment in SPI NOR flash */ +#define CONFIG_ENV_IS_IN_SPI_FLASH +#define CONFIG_ENV_OFFSET (1 << 20) /* 1MiB in */ +#define CONFIG_ENV_SIZE (64 << 10) /* 64KiB */ +#define CONFIG_ENV_SECT_SIZE (256 << 10) /* 256KiB sectors */ +#define CONFIG_ENV_OVERWRITE + +#define CONFIG_PHY_MARVELL /* there is a marvell phy */ +#define PHY_ANEG_TIMEOUT 8000 /* PHY needs a longer aneg time */ + +#define CONFIG_SYS_CONSOLE_INFO_QUIET /* don't print console @ startup */ +#define CONFIG_SYS_ALT_MEMTEST +#define CONFIG_PREBOOT +#define CONFIG_FIT + +#define CONFIG_SYS_HUSH_PARSER /* Use the HUSH parser */ +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " + +/* Keep device tree and initrd in lower memory so the kernel can access them */ +#define CONFIG_EXTRA_ENV_SETTINGS \ + "fdt_high=0x10000000\0" \ + "initrd_high=0x10000000\0" + +/* SATA support */ +#define CONFIG_SYS_SATA_MAX_DEVICE 1 +#define CONFIG_SATA_MV +#define CONFIG_LIBATA +#define CONFIG_LBA48 +#define CONFIG_EFI_PARTITION +#define CONFIG_DOS_PARTITION + +/* Additional FS support/configuration */ +#define CONFIG_SUPPORT_VFAT + +/* PCIe support */ +#ifdef CONFIG_CMD_PCI +#ifndef CONFIG_SPL_BUILD +#define CONFIG_PCI +#define CONFIG_PCI_MVEBU +#define CONFIG_PCI_PNP +#endif +#endif + +/* Enable LCD and reserve 512KB from top of memory*/ +#define CONFIG_SYS_MEM_TOP_HIDE 0x80000 + +#define CONFIG_VIDEO +#define CONFIG_CFB_CONSOLE +#define CONFIG_VGA_AS_SINGLE_DEVICE +#define CONFIG_CMD_BMP + +/* + * mv-common.h should be defined after CMD configs since it used them + * to enable certain macros + */ +#include "mv-common.h" + +/* + * Memory layout while starting into the bin_hdr via the + * BootROM: + * + * 0x4000.4000 - 0x4003.4000 headers space (192KiB) + * 0x4000.4030 bin_hdr start address + * 0x4003.4000 - 0x4004.7c00 BootROM memory allocations (15KiB) + * 0x4007.fffc BootROM stack top + * + * The address space between 0x4007.fffc and 0x400f.fff is not locked in + * L2 cache thus cannot be used. + */ + +/* SPL */ +/* Defines for SPL */ +#define CONFIG_SPL_FRAMEWORK +#define CONFIG_SPL_TEXT_BASE 0x40004030 +#define CONFIG_SPL_MAX_SIZE ((128 << 10) - 0x4030) + +#define CONFIG_SPL_BSS_START_ADDR (0x40000000 + (128 << 10)) +#define CONFIG_SPL_BSS_MAX_SIZE (16 << 10) + +#ifdef CONFIG_SPL_BUILD +#define CONFIG_SYS_MALLOC_SIMPLE +#endif + +#define CONFIG_SPL_STACK (0x40000000 + ((192 - 16) << 10)) +#define CONFIG_SPL_BOOTROM_SAVE (CONFIG_SPL_STACK + 4) + +#define CONFIG_SPL_LIBCOMMON_SUPPORT +#define CONFIG_SPL_LIBGENERIC_SUPPORT +#define CONFIG_SPL_SERIAL_SUPPORT +#define CONFIG_SPL_I2C_SUPPORT + +/* SPL related SPI defines */ +#define CONFIG_SPL_SPI_SUPPORT +#define CONFIG_SPL_SPI_FLASH_SUPPORT +#define CONFIG_SPL_SPI_LOAD +#define CONFIG_SPL_SPI_BUS 0 +#define CONFIG_SPL_SPI_CS 0 +#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x1a000 +#define CONFIG_SYS_U_BOOT_OFFS CONFIG_SYS_SPI_U_BOOT_OFFS + +/* Enable DDR support in SPL (DDR3 training from Marvell bin_hdr) */ +#define CONFIG_DDR_FIXED_SIZE (2 << 20) /* 2GiB */ + +#endif /* _CONFIG_THEADORABLE_H */ diff --git a/include/configs/v5fx30teval.h b/include/configs/v5fx30teval.h deleted file mode 100644 index 298fa3e6d0..0000000000 --- a/include/configs/v5fx30teval.h +++ /dev/null @@ -1,38 +0,0 @@ -/* - * (C) Copyright 2008 - * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es - * This work has been supported by: QTechnology http://qtec.com/ - * SPDX-License-Identifier: GPL-2.0+ -*/ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/*CPU*/ -#define CONFIG_440 1 -#define CONFIG_XILINX_ML507 1 -#include "../board/avnet/v5fx30teval/xparameters.h" - -/*Mem Map*/ -#define CONFIG_SYS_SDRAM_SIZE_MB 64 - -/*Env*/ -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_SIZE 0x20000 -#define CONFIG_ENV_SECT_SIZE 0x20000 -#define CONFIG_ENV_OFFSET 0x1A0000 -#define CONFIG_ENV_ADDR (XPAR_FLASH_MEM0_BASEADDR+CONFIG_ENV_OFFSET) - -/*Misc*/ -#define CONFIG_PREBOOT "echo U-Boot is up and runnining;" - -/*Flash*/ -#define CONFIG_SYS_FLASH_SIZE (16*1024*1024) -#define CONFIG_SYS_MAX_FLASH_SECT 131 -#define MTDIDS_DEFAULT "nor0=v5fx30t-flash" -#define MTDPARTS_DEFAULT "mtdparts=v5fx30t-flash:-(user)" - -/*Generic Configs*/ -#include <configs/xilinx-ppc440.h> - -#endif /* __CONFIG_H */ diff --git a/include/configs/xilinx-ppc.h b/include/configs/xilinx-ppc.h index eb400d0960..d01d88b33f 100644 --- a/include/configs/xilinx-ppc.h +++ b/include/configs/xilinx-ppc.h @@ -1,6 +1,6 @@ /* * (C) Copyright 2008 - * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es + * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@gmail.com * This work has been supported by: QTechnology http://qtec.com/ * * (C) Copyright 2008 @@ -101,22 +101,10 @@ #define CONFIG_SYS_NO_FLASH #endif -/* serial communication */ -#ifdef XPAR_UARTLITE_0_BASEADDR -#define CONFIG_XILINX_UARTLITE -#define XILINX_UARTLITE_BASEADDR XPAR_UARTLITE_0_BASEADDR -#define CONFIG_BAUDRATE XPAR_UARTLITE_0_BAUDRATE -#define CONFIG_SYS_BAUDRATE_TABLE { CONFIG_BAUDRATE } -#else -#ifdef XPAR_UARTNS550_0_BASEADDR -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE 4 -#define CONFIG_CONS_INDEX 1 -#define CONFIG_SYS_NS16550_COM1 XPAR_UARTNS550_0_BASEADDR -#define CONFIG_SYS_NS16550_CLK XPAR_UARTNS550_0_CLOCK_FREQ_HZ +#define CONFIG_OF_LIBFDT 1 #define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 115200 } -#endif -#endif +/* The following table includes the supported baudrates */ +# define CONFIG_SYS_BAUDRATE_TABLE \ + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400} #endif /* __CONFIG_H */ diff --git a/include/configs/xilinx-ppc405-generic.h b/include/configs/xilinx-ppc405-generic.h index 40fa0878a4..6182b0e7cf 100644 --- a/include/configs/xilinx-ppc405-generic.h +++ b/include/configs/xilinx-ppc405-generic.h @@ -1,7 +1,7 @@ /* * * (C) Copyright 2008 - * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es + * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@gmail.com * This work has been supported by: QTechnology http://qtec.com/ * * (C) Copyright 2008 @@ -14,6 +14,9 @@ #include "../board/xilinx/ppc405-generic/xparameters.h" +#define CONFIG_405 1 +#define CONFIG_XILINX_405 1 + /* sdram */ #define CONFIG_SYS_SDRAM_SIZE_MB 256 @@ -26,16 +29,16 @@ #define CONFIG_ENV_OVERWRITE 1 /*Misc*/ -#define CONFIG_PREBOOT "echo U-Boot is up and runnining;" +#define CONFIG_PREBOOT "echo U-Boot is up and running;" /*Flash*/ -#define CONFIG_SYS_FLASH_BASE XPAR_FLASH_MEM0_BASEADDR -#define CONFIG_SYS_FLASH_SIZE (32*1024*1024) -#define CONFIG_SYS_MAX_FLASH_SECT 71 +#define CONFIG_SYS_FLASH_BASE XPAR_FLASH_MEM0_BASEADDR +#define CONFIG_SYS_FLASH_SIZE (128*1024*1024) +#define CONFIG_SYS_MAX_FLASH_SECT 1024 #define CONFIG_SYS_FLASH_CFI 1 #define CONFIG_FLASH_CFI_DRIVER 1 -#define MTDIDS_DEFAULT "nor0=ppc405-flash" -#define MTDPARTS_DEFAULT "mtdpartsa=ppc405-flash:-(user)" +#define MTDIDS_DEFAULT "nor0=flash" +#define MTDPARTS_DEFAULT "mtdparts=flash:-(user)" -#include <configs/xilinx-ppc405.h> +#include <configs/xilinx-ppc.h> #endif /* __CONFIG_H */ diff --git a/include/configs/xilinx-ppc405.h b/include/configs/xilinx-ppc405.h deleted file mode 100644 index a0151fe8f4..0000000000 --- a/include/configs/xilinx-ppc405.h +++ /dev/null @@ -1,22 +0,0 @@ -/* - * - * (C) Copyright 2008 - * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es - * This work has been supported by: QTechnology http://qtec.com/ - * - * (C) Copyright 2008 - * Georg Schardt <schardt@team-ctech.de> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* cpu parameter */ -#define CONFIG_405 1 -#define CONFIG_XILINX_405 1 - -#include <configs/xilinx-ppc.h> - -#endif diff --git a/include/configs/xilinx-ppc440-generic.h b/include/configs/xilinx-ppc440-generic.h index 95b8834078..f2505a6cd2 100644 --- a/include/configs/xilinx-ppc440-generic.h +++ b/include/configs/xilinx-ppc440-generic.h @@ -1,6 +1,6 @@ /* * (C) Copyright 2008 - * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es + * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@gmail.com * This work has been supported by: QTechnology http://qtec.com/ * SPDX-License-Identifier: GPL-2.0+ */ @@ -8,31 +8,42 @@ #ifndef __CONFIG_H #define __CONFIG_H -/*CPU*/ +/* CPU */ #define CONFIG_440 1 +#define CONFIG_XILINX_440 1 #define CONFIG_XILINX_PPC440_GENERIC 1 #include "../board/xilinx/ppc440-generic/xparameters.h" -/*Mem Map*/ +/* Mem Map */ #define CONFIG_SYS_SDRAM_SIZE_MB 256 -/*Env*/ +/* Env */ #define CONFIG_ENV_IS_IN_FLASH 1 #define CONFIG_ENV_SIZE 0x20000 #define CONFIG_ENV_SECT_SIZE 0x20000 -#define CONFIG_ENV_OFFSET 0x340000 +#define CONFIG_ENV_OFFSET 0x340000 #define CONFIG_ENV_ADDR (XPAR_FLASH_MEM0_BASEADDR+CONFIG_ENV_OFFSET) -/*Misc*/ -#define CONFIG_PREBOOT "echo U-Boot is up and runnining;" - -/*Flash*/ -#define CONFIG_SYS_FLASH_SIZE (32*1024*1024) -#define CONFIG_SYS_MAX_FLASH_SECT 259 -#define MTDIDS_DEFAULT "nor0=ml507-flash" -#define MTDPARTS_DEFAULT "mtdparts=ml507-flash:-(user)" - -/*Generic Configs*/ -#include <configs/xilinx-ppc440.h> +/* Misc */ +#define CONFIG_PREBOOT "echo U-Boot is up and running;" + +/* Flash */ +#define CONFIG_SYS_FLASH_SIZE (128*1024*1024) +#define CONFIG_SYS_MAX_FLASH_SECT 1024 +#define MTDIDS_DEFAULT "nor0=flash" +#define MTDPARTS_DEFAULT "mtdparts=flash:-(user)" + +/* Net */ +#ifdef XPAR_LLTEMAC_0_BASEADDR +#define CONFIG_XILINX_LL_TEMAC +#define CONFIG_MII +#define CONFIG_PHYLIB +#define CONFIG_PHY_MARVELL +#define CONFIG_NET_RANDOM_ETHADDR +#define CONFIG_LIB_RAND +#endif + +/* Generic Configs */ +#include <configs/xilinx-ppc.h> #endif /* __CONFIG_H */ diff --git a/include/configs/xilinx-ppc440.h b/include/configs/xilinx-ppc440.h deleted file mode 100644 index f45700878e..0000000000 --- a/include/configs/xilinx-ppc440.h +++ /dev/null @@ -1,17 +0,0 @@ -/* - * (C) Copyright 2008 - * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es - * This work has been supported by: QTechnology http://qtec.com/ - * SPDX-License-Identifier: GPL-2.0+ -*/ - -#ifndef __CONFIG_GEN_H -#define __CONFIG_GEN_H - -/*CPU*/ -#define CONFIG_440 1 -#define CONFIG_XILINX_440 1 - -#include <configs/xilinx-ppc.h> - -#endif /* __CONFIG_H */ diff --git a/include/configs/xilinx_zynqmp.h b/include/configs/xilinx_zynqmp.h index 03f74508ef..27ef74daf5 100644 --- a/include/configs/xilinx_zynqmp.h +++ b/include/configs/xilinx_zynqmp.h @@ -23,10 +23,8 @@ #define GICD_BASE 0xF9010000 #define GICC_BASE 0xF9020000 -/* Physical Memory Map */ -#define CONFIG_NR_DRAM_BANKS 1 -#define CONFIG_SYS_SDRAM_BASE 0 -#define CONFIG_SYS_SDRAM_SIZE 0x40000000 +#define CONFIG_SYS_ALT_MEMTEST +#define CONFIG_SYS_MEMTEST_SCRATCH 0xfffc0000 #define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE #define CONFIG_SYS_MEMTEST_END CONFIG_SYS_SDRAM_SIZE @@ -37,7 +35,9 @@ /* Cache Definitions */ #define CONFIG_SYS_CACHELINE_SIZE 64 -#define CONFIG_IDENT_STRING " Xilinx ZynqMP" +#if !defined(CONFIG_IDENT_STRING) +# define CONFIG_IDENT_STRING " Xilinx ZynqMP" +#endif #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x7fff0) @@ -45,7 +45,9 @@ #define CONFIG_OF_LIBFDT /* Generic Timer Definitions - setup in EL3. Setup by ATF for other cases */ -#define COUNTER_FREQUENCY 4000000 +#if !defined(COUNTER_FREQUENCY) +# define COUNTER_FREQUENCY 100000000 +#endif /* Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 0x2000000) @@ -137,9 +139,9 @@ #define CONFIG_THOR_RESET_OFF #define DFU_ALT_INFO_RAM \ "dfu_ram_info=" \ - "set dfu_alt_info " \ - "Image ram 0x200000 0x1800000\\\\;" \ - "system.dtb ram 0x7000000 0x40000\0" \ + "setenv dfu_alt_info " \ + "Image ram $kernel_addr $kernel_size\\\\;" \ + "system.dtb ram $fdt_addr $fdt_size\0" \ "dfu_ram=run dfu_ram_info && dfu 0 ram 0\0" \ "thor_ram=run dfu_ram_info && thordown 0 ram 0\0" @@ -156,12 +158,14 @@ "kernel_addr=0x80000\0" \ "fdt_addr=0x7000000\0" \ "fdt_high=0x10000000\0" \ - "sdboot=mmcinfo && load mmc 0:0 $fdt_addr system.dtb && " \ - "load mmc 0:0 $kernel_addr Image && booti $kernel_addr - $fdt_addr\0" \ + "kernel_size=0x2000000\0" \ + "fdt_size=0x80000\0" \ + "sdbootdev=0\0"\ + "sdboot=mmc dev $sdbootdev && mmcinfo && load mmc $sdbootdev:$partid $fdt_addr system.dtb && " \ + "load mmc $sdbootdev:$partid $kernel_addr Image && " \ + "booti $kernel_addr - $fdt_addr\0" \ DFU_ALT_INFO -#define CONFIG_BOOTARGS "setenv bootargs console=ttyPS0,${baudrate} " \ - "earlycon=cdns,mmio,0xff000000,${baudrate}n8" #define CONFIG_PREBOOT "run bootargs" #define CONFIG_BOOTCOMMAND "run $modeboot" #define CONFIG_BOOTDELAY 5 @@ -189,7 +193,10 @@ # define CONFIG_MII # define CONFIG_SYS_FAULT_ECHO_LINK_DOWN # define CONFIG_PHY_MARVELL +# define CONFIG_PHY_NATSEMI # define CONFIG_PHY_TI +# define CONFIG_PHY_GIGE +# define PHY_ANEG_TIMEOUT 20000 #endif /* I2C */ diff --git a/include/configs/xilinx_zynqmp_ep.h b/include/configs/xilinx_zynqmp_ep.h index ec39211af3..9906c426f5 100644 --- a/include/configs/xilinx_zynqmp_ep.h +++ b/include/configs/xilinx_zynqmp_ep.h @@ -1,7 +1,5 @@ /* - * Configuration for Xilinx ZynqMP emulation - * platforms. See zynqmp-common.h for ZynqMP - * common configs + * Configuration for Xilinx ZynqMP emulation platforms * * (C) Copyright 2014 - 2015 Xilinx, Inc. * Michal Simek <michal.simek@xilinx.com> @@ -17,6 +15,7 @@ #define CONFIG_ZYNQ_SDHCI0 #define CONFIG_ZYNQ_SDHCI_MAX_FREQ 52000000 +#define CONFIG_ZYNQ_SDHCI_MIN_FREQ (CONFIG_ZYNQ_SDHCI_MAX_FREQ << 9) #define CONFIG_ZYNQ_I2C0 #define CONFIG_SYS_I2C_ZYNQ #define CONFIG_ZYNQ_EEPROM @@ -24,6 +23,13 @@ #define CONFIG_ZYNQMP_XHCI_LIST {ZYNQMP_USB0_XHCI_BASEADDR, \ ZYNQMP_USB1_XHCI_BASEADDR} +/* Physical Memory Map */ +#define CONFIG_NR_DRAM_BANKS 1 +#define CONFIG_SYS_SDRAM_BASE 0 +#define CONFIG_SYS_SDRAM_SIZE 0x40000000 + +#define COUNTER_FREQUENCY 4000000 + #include <configs/xilinx_zynqmp.h> #endif /* __CONFIG_ZYNQMP_EP_H */ diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h index 0ab60839b6..e8c3ef0c38 100644 --- a/include/configs/zynq-common.h +++ b/include/configs/zynq-common.h @@ -66,7 +66,6 @@ #ifdef CONFIG_ZYNQ_QSPI # define CONFIG_SF_DEFAULT_SPEED 30000000 # define CONFIG_SPI_FLASH_ISSI -# define CONFIG_SPI_FLASH_BAR # define CONFIG_CMD_SF #endif |