diff options
Diffstat (limited to 'include/configs')
-rw-r--r-- | include/configs/imx6_logic.h | 178 |
1 files changed, 178 insertions, 0 deletions
diff --git a/include/configs/imx6_logic.h b/include/configs/imx6_logic.h new file mode 100644 index 0000000000..bb95dd81eb --- /dev/null +++ b/include/configs/imx6_logic.h @@ -0,0 +1,178 @@ +/* + * Copyright (C) 2017 Logic PD, Inc. + * + * Configuration settings for the LogicPD i.MX6 SOM. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __IMX6LOGIC_CONFIG_H +#define __IMX6LOGIC_CONFIG_H + +#define CONFIG_MXC_UART_BASE UART1_BASE +#define CONSOLE_DEV "ttymxc0" + +#include <config_distro_defaults.h> +#include "mx6_common.h" + +/* Size of malloc() pool */ +#define CONFIG_SYS_MALLOC_LEN (10 * SZ_1M) + +#define CONFIG_MXC_UART + +/* MMC Configs */ +#define CONFIG_SYS_FSL_ESDHC_ADDR 0 +#define CONFIG_SYS_FSL_USDHC_NUM 2 +#define CONFIG_MMCROOT "/dev/mmcblk1p2" /* Dev kit SD card */ + +/* Ethernet Configs */ +#define CONFIG_MII +#define CONFIG_FEC_XCV_TYPE RMII +#define CONFIG_ETHPRIME "FEC" +#define CONFIG_FEC_MXC_PHYADDR 0 +#define CONFIG_PHYLIB +#define CONFIG_PHY_SMSC + +/* Command definition */ +#define CONFIG_CMD_BMODE + +#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "script=boot.scr\0" \ + "image=zImage\0" \ + "bootm_size=0x10000000\0" \ + "fdt_addr_r=0x18000000\0" \ + "fdt_addr=0x18000000\0" \ + "ramdisk_addr_r=0x13000000\0" \ + "ramdiskaddr=0x13000000\0" \ + "kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \ + "ramdisk_file=rootfs.cpio.uboot\0" \ + "boot_fdt=try\0" \ + "ip_dyn=yes\0" \ + "console=" CONSOLE_DEV "\0" \ + "mmcdev=1\0" \ + "mmcpart=1\0" \ + "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \ + "nandroot=ubi0:rootfs rootfstype=ubifs\0" \ + "mmcargs=setenv bootargs console=${console},${baudrate}" \ + " root=${mmcroot} ${mtdparts}\0" \ + "nandargs=setenv bootargs console=${console},${baudrate}" \ + " ubi.mtd=fs root=${nandroot} ${mtdparts}\0" \ + "ramargs=setenv bootargs console=${console},${baudrate}" \ + " root=/dev/ram rw ${mtdparts}\0" \ + "loadbootscript=" \ + "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \ + "bootscript=echo Running bootscript from mmc ...;" \ + " source\0" \ + "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image};" \ + " setenv kernelsize ${filesize}\0" \ + "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \ + "loadramdisk=fatload mmc ${mmcdev}:${mmcpart} ${ramdiskaddr}" \ + " ${ramdisk_file}; setenv ramdisksize ${filesize}\0" \ + "mmcboot=echo Booting from mmc...; run mmcargs; run loadimage;" \ + " run loadfdt; bootz ${loadaddr} - ${fdt_addr}\0" \ + "mmcramboot=run ramargs; run loadimage;" \ + " run loadfdt; run loadramdisk;" \ + " bootz ${loadaddr} ${ramdiskaddr} ${fdt_addr}\0" \ + "nandboot=echo Booting from nand ...; " \ + " run nandargs;" \ + " nand read ${loadaddr} kernel ${kernelsize};" \ + " nand read ${fdt_addr} dtb;" \ + " bootz ${loadaddr} - ${fdt_addr}\0" \ + "nandramboot=echo Booting RAMdisk from nand ...; " \ + " nand read ${ramdiskaddr} fs ${ramdisksize};" \ + " nand read ${loadaddr} kernel ${kernelsize};" \ + " nand read ${fdt_addr} dtb;" \ + " run ramargs;" \ + " bootz ${loadaddr} ${ramdiskaddr} ${fdt_addr}\0" \ + "netargs=setenv bootargs console=${console},${baudrate} " \ + "root=/dev/nfs" \ + " ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \ + "netboot=echo Booting from net ...; " \ + "run netargs; " \ + "if test ${ip_dyn} = yes; then " \ + "setenv get_cmd dhcp; " \ + "else " \ + "setenv get_cmd tftp; " \ + "fi; " \ + "${get_cmd} ${image}; " \ + "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ + "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \ + "bootz ${loadaddr} - ${fdt_addr}; " \ + "else " \ + "if test ${boot_fdt} = try; then " \ + "bootz; " \ + "else " \ + "echo WARN: Cannot load the DT; " \ + "fi; " \ + "fi; " \ + "else " \ + "bootz; " \ + "fi;\0" \ + "autoboot=mmc dev ${mmcdev};" \ + "if mmc rescan; then " \ + "if run loadbootscript; then " \ + "run bootscript; " \ + "else " \ + "if run loadimage; then " \ + "run mmcboot; " \ + "else run netboot; " \ + "fi; " \ + "fi; " \ + "else run netboot; fi" +#define CONFIG_BOOTCOMMAND \ + "run autoboot" + +#define CONFIG_ARP_TIMEOUT 200UL + +#define CONFIG_SYS_MEMTEST_START 0x10000000 +#define CONFIG_SYS_MEMTEST_END 0x10010000 +#define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000 + +#define CONFIG_STACKSIZE (128 * 1024) + +/* Physical Memory Map */ +#define CONFIG_NR_DRAM_BANKS 1 +#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM +#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR +#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE + +#define CONFIG_SYS_INIT_SP_OFFSET \ + (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_ADDR \ + (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) + +/* Environment organization */ +#define CONFIG_ENV_SIZE (8 * 1024) +#define CONFIG_ENV_IS_IN_NAND +#define CONFIG_ENV_OFFSET 0x400000 +#define CONFIG_ENV_SECT_SIZE CONFIG_ENV_SIZE + +/* NAND stuff */ +#define CONFIG_CMD_NAND_TRIMFFS +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_SYS_NAND_BASE 0x40000000 +#define CONFIG_SYS_NAND_5_ADDR_CYCLE +#define CONFIG_SYS_NAND_ONFI_DETECTION +#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x200000 + +/* MTD device */ +# define CONFIG_MTD_DEVICE +# define CONFIG_CMD_MTDPARTS +# define CONFIG_MTD_PARTITIONS +# define MTDIDS_DEFAULT "nand0=gpmi-nand" +# define MTDPARTS_DEFAULT "mtdparts=gpmi-nand:4m(uboot)," \ + "1m(env),16m(kernel),1m(dtb),-(fs)" + +/* DMA stuff, needed for GPMI/MXS NAND support */ +#define CONFIG_APBH_DMA +#define CONFIG_APBH_DMA_BURST +#define CONFIG_APBH_DMA_BURST8 + +/* EEPROM contains serial no, MAC addr and other Logic PD info */ +#define CONFIG_I2C_EEPROM + +#endif /* __IMX6LOGIC_CONFIG_H */ |