diff options
Diffstat (limited to 'include/configs')
90 files changed, 6862 insertions, 596 deletions
diff --git a/include/configs/ASH405.h b/include/configs/ASH405.h index 9841893899..d03c05bf34 100644 --- a/include/configs/ASH405.h +++ b/include/configs/ASH405.h @@ -132,6 +132,9 @@ * NAND-FLASH stuff *----------------------------------------------------------------------- */ + +#define CFG_NAND_LEGACY + #define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ #define SECTORSIZE 512 diff --git a/include/configs/Adder.h b/include/configs/Adder.h index f8075466c4..0e6b50f8b0 100644 --- a/include/configs/Adder.h +++ b/include/configs/Adder.h @@ -1,5 +1,5 @@ /* - * Copyright (C) 2004 Arabella Software Ltd. + * Copyright (C) 2004-2005 Arabella Software Ltd. * Yuli Barcohen <yuli@arabellasw.com> * * Support for Analogue&Micro Adder boards family. @@ -35,11 +35,13 @@ #define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */ #define CONFIG_BAUDRATE 38400 -#define CONFIG_FEC_ENET /* Ethernet is on FEC */ -#ifdef CONFIG_FEC_ENET +#define CONFIG_ETHER_ON_FEC1 +#define CONFIG_ETHER_ON_FEC2 + +#if defined(CONFIG_ETHER_ON_FEC1) || defined(CONFIG_ETHER_ON_FEC2) #define CFG_DISCOVER_PHY #define FEC_ENET -#endif /* CONFIG_FEC_ENET */ +#endif /* CONFIG_ETHER_ON_FEC || CONFIG_ETHER_ON_FEC2 */ #define CONFIG_8xx_OSCLK 10000000 /* 10 MHz oscillator on EXTCLK */ #define CONFIG_8xx_CPUCLK_DEFAULT 50000000 @@ -47,7 +49,7 @@ #ifdef CONFIG_MPC852T #define CFG_8xx_CPUCLK_MAX 50000000 #else -#define CFG_8xx_CPUCLK_MAX 120000000 +#define CFG_8xx_CPUCLK_MAX 133000000 #endif /* CONFIG_MPC852T */ #define CONFIG_COMMANDS (CONFIG_CMD_DFL \ @@ -62,7 +64,7 @@ #define CONFIG_BOOTDELAY 5 /* Autoboot after 5 seconds */ #define CONFIG_BOOTCOMMAND "bootm fe040000" /* Autoboot command */ -#define CONFIG_BOOTARGS "root=/dev/mtdblock2 rw" +#define CONFIG_BOOTARGS "root=/dev/mtdblock1 rw mtdparts=1M(ROM)ro,-(root)" #define CONFIG_BZIP2 /* Include support for bzip2 compressed images */ #undef CONFIG_WATCHDOG /* Disable platform specific watchdog */ @@ -79,7 +81,7 @@ #define CFG_MAXARGS 16 /* Max number of command args */ #define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ -#define CFG_LOAD_ADDR 0x100000 /* Default load address */ +#define CFG_LOAD_ADDR 0x400000 /* Default load address */ #define CFG_HZ 1000 /* Decrementer freq: 1 ms ticks */ @@ -89,24 +91,21 @@ * RAM configuration (note that CFG_SDRAM_BASE must be zero) */ #define CFG_SDRAM_BASE 0x00000000 -#define CFG_SDRAM_SIZE 0x00800000 /* 8 Mbyte */ - -#define CFG_OR1_PRELIM (0xFF800000 | OR_CSNT_SAM | OR_ACS_DIV2) -#define CFG_BR1_PRELIM (CFG_SDRAM_BASE | BR_PS_32 | BR_MS_UPMA | BR_V) +#define CFG_SDRAM_MAX_SIZE 0x01000000 /* Up to 16 Mbyte */ -#define CFG_MAMR 0x00802114 +#define CFG_MAMR 0x00002114 /* - * 2048 SDRAM rows + * 4096 Up to 4096 SDRAM rows * 1000 factor s -> ms - * 64 PTP (pre-divider from MPTPR) from SDRAM example configuration + * 32 PTP (pre-divider from MPTPR) * 4 Number of refresh cycles per period * 64 Refresh cycle in ms per number of rows */ -#define CFG_PTA_PER_CLK ((2048 * 64 * 1000) / (4 * 64)) +#define CFG_PTA_PER_CLK ((4096 * 32 * 1000) / (4 * 64)) #define CFG_MEMTEST_START 0x00100000 /* memtest works on */ -#define CFG_MEMTEST_END 0x00700000 /* 1 ... 7 MB in SDRAM */ +#define CFG_MEMTEST_END 0x00500000 /* 1 ... 5 MB in SDRAM */ #define CFG_RESET_ADDRESS 0x09900000 @@ -139,6 +138,8 @@ #define CFG_ENV_SECT_SIZE 0x10000 /* We use one complete sector */ #define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN) +#define CONFIG_ENV_OVERWRITE + #define CFG_OR0_PRELIM 0xFF000774 #define CFG_BR0_PRELIM (CFG_FLASH_BASE | BR_PS_16 | BR_MS_GPCM | BR_V) diff --git a/include/configs/BC3450.h b/include/configs/BC3450.h new file mode 100644 index 0000000000..5b54f30e08 --- /dev/null +++ b/include/configs/BC3450.h @@ -0,0 +1,568 @@ +/* + * -- Version 1.1 -- + * + * (C) Copyright 2003-2005 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * (C) Copyright 2004-2005 + * Martin Krause, TQ-Systems GmbH, martin.krause@tqs.de + * + * (C) Copyright 2005 + * Stefan Strobl, GERSYS GmbH, stefan.strobl@gersys.de. + * + * History: + * 1.1 - add define CONFIG_ZERO_BOOTDELAY_CHECK + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Configuration Options + */ +#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */ +#define CONFIG_MPC5200 1 /* (more precisely a MPC5200 CPU) */ +#define CONFIG_TQM5200 1 /* ... on a TQM5200 module */ + +#define CONFIG_BC3450 1 /* ... on a BC3450 mainboard */ +#define CONFIG_BC3450_PS2 1 /* + a PS/2 converter onboard */ +#define CONFIG_BC3450_IDE 1 /* + IDE drives (Compact Flash) */ +#define CONFIG_BC3450_USB 1 /* + USB support */ +# define CONFIG_FAT 1 /* + FAT support */ +# define CONFIG_EXT2 1 /* + EXT2 support */ +#undef CONFIG_BC3450_BUZZER /* + Buzzer onboard */ +#undef CONFIG_BC3450_CAN /* + CAN transceiver */ +#undef CONFIG_BC3450_DS1340 /* + a RTC DS1340 onboard */ +#undef CONFIG_BC3450_DS3231 /* + a RTC DS3231 onboard tbd */ +#undef CONFIG_BC3450_AC97 /* + AC97 on PSC2, tbd */ +#define CONFIG_BC3450_FP 1 /* + enable FP O/P */ +#undef CONFIG_BC3450_CRT /* + enable CRT O/P (Debug only!) */ + +#define CFG_MPC5XXX_CLKIN 33000000 /* ... running at 33.000000MHz */ + +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#endif + +/* + * Serial console configuration + */ +#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */ +#define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */ +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } + +/* + * AT-PS/2 Multiplexer + */ +#ifdef CONFIG_BC3450_PS2 +# define CONFIG_PS2KBD /* AT-PS/2 Keyboard */ +# define CONFIG_PS2MULT /* .. on PS/2 Multiplexer */ +# define CONFIG_PS2SERIAL 6 /* .. on PSC6 */ +# define CONFIG_PS2MULT_DELAY (CFG_HZ/2) /* Initial delay */ +# define CONFIG_BOARD_EARLY_INIT_R +#endif /* CONFIG_BC3450_PS2 */ + +/* + * PCI Mapping: + * 0x40000000 - 0x4fffffff - PCI Memory + * 0x50000000 - 0x50ffffff - PCI IO Space + */ +# define CONFIG_PCI 1 +# define CONFIG_PCI_PNP 1 +/* #define CONFIG_PCI_SCAN_SHOW 1 */ + +#define CONFIG_PCI_MEM_BUS 0x40000000 +#define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS +#define CONFIG_PCI_MEM_SIZE 0x10000000 + +#define CONFIG_PCI_IO_BUS 0x50000000 +#define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS +#define CONFIG_PCI_IO_SIZE 0x01000000 + +#define CONFIG_NET_MULTI 1 +/*#define CONFIG_EEPRO100 XXX - FIXME: conflicts when CONFIG_MII is enabled */ +#define CFG_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */ +#define CONFIG_NS8382X 1 + +#ifdef CONFIG_PCI +# define ADD_PCI_CMD CFG_CMD_PCI +#else +# define ADD_PCI_CMD 0 +#endif + +/* + * Video console + */ +# define CONFIG_VIDEO +# define CONFIG_VIDEO_SM501 +# define CONFIG_VIDEO_SM501_32BPP +# define CONFIG_CFB_CONSOLE +# define CONFIG_VIDEO_LOGO +# define CONFIG_VGA_AS_SINGLE_DEVICE +# define CONFIG_CONSOLE_EXTRA_INFO /* display Board/Device-Infos */ +# define CONFIG_VIDEO_SW_CURSOR +# define CONFIG_SPLASH_SCREEN +# define CFG_CONSOLE_IS_IN_ENV + +#ifdef CONFIG_VIDEO +# define ADD_BMP_CMD CFG_CMD_BMP +#else +# define ADD_BMP_CMD 0 +#endif + +/* + * Partitions + */ +#define CONFIG_MAC_PARTITION +#define CONFIG_DOS_PARTITION +#define CONFIG_ISO_PARTITION + +/* + * USB + */ +#ifdef CONFIG_BC3450_USB +# define CONFIG_USB_OHCI +# define ADD_USB_CMD CFG_CMD_USB +# define CONFIG_USB_STORAGE +#else /* !CONFIG_BC3450_USB */ +# define ADD_USB_CMD 0 +#endif /* CONFIG_BC3450_USB */ + +/* + * POST support + */ +#define CONFIG_POST (CFG_POST_MEMORY | \ + CFG_POST_CPU | \ + CFG_POST_I2C) + +#ifdef CONFIG_POST +# define CFG_CMD_POST_DIAG CFG_CMD_DIAG +/* preserve space for the post_word at end of on-chip SRAM */ +# define MPC5XXX_SRAM_POST_SIZE MPC5XXX_SRAM_SIZE-4 +#else +# define CFG_CMD_POST_DIAG 0 +#endif /* CONFIG_POST */ + +/* + * IDE + */ +#ifdef CONFIG_BC3450_IDE +# define ADD_IDE_CMD CFG_CMD_IDE +#else +# define ADD_IDE_CMD 0 +#endif /* CONFIG_BC3450_IDE */ + +/* + * Filesystem support + */ +#if defined (CONFIG_BC3450_IDE) || defined (CONFIG_BC3450_USB) +#ifdef CONFIG_FAT +# define ADD_FAT_CMD CFG_CMD_FAT +#else +# define ADD_FAT_CMD 0 +#endif /* CONFIG_FAT */ + +#ifdef CONFIG_EXT2 +# define ADD_EXT2_CMD CFG_CMD_EXT2 +#else +# define ADD_EXT2_CMD 0 +#endif /* CONFIG_EXT2 */ +#endif /* CONFIG_BC3450_IDE / _USB */ + +/* + * Supported commands + */ +#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ + ADD_BMP_CMD | \ + ADD_IDE_CMD | \ + ADD_FAT_CMD | \ + ADD_EXT2_CMD | \ + ADD_PCI_CMD | \ + ADD_USB_CMD | \ + CFG_CMD_ASKENV | \ + CFG_CMD_DATE | \ + CFG_CMD_DHCP | \ + CFG_CMD_ECHO | \ + CFG_CMD_EEPROM | \ + CFG_CMD_I2C | \ + CFG_CMD_JFFS2 | \ + CFG_CMD_MII | \ + CFG_CMD_NFS | \ + CFG_CMD_PING | \ + CFG_CMD_POST_DIAG | \ + CFG_CMD_REGINFO | \ + CFG_CMD_SNTP | \ + CFG_CMD_BSP) + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include <cmd_confdefs.h> + +#define CONFIG_TIMESTAMP /* display image timestamps */ + +#if (TEXT_BASE == 0xFC000000) /* Boot low */ +# define CFG_LOWBOOT 1 +#endif + +/* + * Autobooting + */ +#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ +#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ + +#define CONFIG_PREBOOT "echo;" \ + "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \ + "echo;" + +#undef CONFIG_BOOTARGS + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "ipaddr=192.168.1.10\0" \ + "serverip=192.168.1.3\0" \ + "netmask=255.255.255.0\0" \ + "hostname=bc3450\0" \ + "rootpath=/opt/eldk/ppc_6xx\0" \ + "kernel_addr=fc0a0000\0" \ + "ramdisk_addr=fc1c0000\0" \ + "ramargs=setenv bootargs root=/dev/ram rw\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=$(serverip):$(rootpath)\0" \ + "ideargs=setenv bootargs root=/dev/hda2 ro\0" \ + "addip=setenv bootargs $(bootargs) " \ + "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)" \ + ":$(hostname):$(netdev):off panic=1\0" \ + "addcons=setenv bootargs $(bootargs) " \ + "console=ttyS0,$(baudrate) console=tty0\0" \ + "flash_self=run ramargs addip addcons;" \ + "bootm $(kernel_addr) $(ramdisk_addr)\0" \ + "flash_nfs=run nfsargs addip addcons; bootm $(kernel_addr)\0" \ + "net_nfs=tftp 200000 $(bootfile); " \ + "run nfsargs addip addcons; bootm\0" \ + "ide_nfs=run nfsargs addip addcons; " \ + "disk 200000 0:1; bootm\0" \ + "ide_ide=run ideargs addip addcons; " \ + "disk 200000 0:1; bootm\0" \ + "usb_self=run usbload; run ramargs addip addcons; " \ + "bootm 200000 400000\0" \ + "usbload=usb reset; usb scan; usbboot 200000 0:1; " \ + "usbboot 400000 0:2\0" \ + "bootfile=uImage\0" \ + "load=tftp 200000 $(u-boot)\0" \ + "u-boot=u-boot.bin\0" \ + "update=protect off FC000000 FC05FFFF;" \ + "erase FC000000 FC05FFFF;" \ + "cp.b 200000 FC000000 $(filesize);" \ + "protect on FC000000 FC05FFFF\0" \ + "" + +#define CONFIG_BOOTCOMMAND "run flash_self" + +/* + * IPB Bus clocking configuration. + */ +#define CFG_IPBSPEED_133 /* define for 133MHz speed */ + +/* + * PCI Bus clocking configuration + * + * Actually a PCI Clock of 66 MHz is only set (in cpu_init.c) if + * CFG_IPBSPEED_133 is defined. This is because a PCI Clock of 66 MHz yet + * hasn't been tested with a IPB Bus Clock of 66 MHz. + */ +#if defined(CFG_IPBSPEED_133) +# define CFG_PCISPEED_66 /* define for 66MHz speed */ +#endif + +/* + * I2C configuration + */ +#define CONFIG_HARD_I2C 1 /* I2C with hardware support */ +#define CFG_I2C_MODULE 2 /* Select I2C module #2 */ + +/* + * I2C clock frequency + * + * Please notice, that the resulting clock frequency could differ from the + * configured value. This is because the I2C clock is derived from system + * clock over a frequency divider with only a few divider values. U-boot + * calculates the best approximation for CFG_I2C_SPEED. However the calculated + * approximation allways lies below the configured value, never above. + */ +#define CFG_I2C_SPEED 100000 /* 100 kHz */ +#define CFG_I2C_SLAVE 0x7F + +/* + * EEPROM configuration for I²C EEPROM M24C32 + * M24C64 should work also. For other EEPROMs config should be verified. + * + * The TQM5200 module may hold an EEPROM at address 0x50. + */ +#define CFG_I2C_EEPROM_ADDR 0x50 /* 1010000x (TQM) */ +#define CFG_I2C_EEPROM_ADDR_LEN 2 +#define CFG_EEPROM_PAGE_WRITE_BITS 5 /* =32 Bytes per write */ +#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 70 + +/* + * RTC configuration + */ +#if defined (CONFIG_BC3450_DS1340) && !defined (CONFIG_BC3450_DS3231) +# define CONFIG_RTC_M41T11 1 +# define CFG_I2C_RTC_ADDR 0x68 +#else +# define CONFIG_RTC_MPC5200 1 /* use MPC5200 internal RTC */ +# define CONFIG_BOARD_EARLY_INIT_R +#endif + +/* + * Flash configuration + */ +#define CFG_FLASH_BASE TEXT_BASE /* 0xFC000000 */ + +/* use CFI flash driver if no module variant is spezified */ +#define CFG_FLASH_CFI 1 /* Flash is CFI conformant */ +#define CFG_FLASH_CFI_DRIVER 1 /* Use the common driver */ +#define CFG_FLASH_BANKS_LIST { CFG_BOOTCS_START } +#define CFG_FLASH_EMPTY_INFO +#define CFG_FLASH_SIZE 0x04000000 /* 64 MByte */ +#define CFG_MAX_FLASH_SECT 512 /* max num of sects on one chip */ +#undef CFG_FLASH_USE_BUFFER_WRITE /* not supported yet for AMD */ + +#if !defined(CFG_LOWBOOT) +#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x00760000 + 0x00800000) +#else /* CFG_LOWBOOT */ +#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x00060000) +#endif /* CFG_LOWBOOT */ +#define CFG_MAX_FLASH_BANKS 1 /* max num of flash banks + (= chip selects) */ +#define CFG_FLASH_ERASE_TOUT 240000 /* Flash Erase Timeout (in ms) */ +#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */ + +/* Dynamic MTD partition support */ +#define CONFIG_JFFS2_CMDLINE +#define MTDIDS_DEFAULT "nor0=TQM5200-0" +#define MTDPARTS_DEFAULT "mtdparts=TQM5200-0:640k(firmware)," \ + "1408k(kernel)," \ + "2m(initrd)," \ + "4m(small-fs)," \ + "16m(big-fs)," \ + "8m(misc)" + +/* + * Environment settings + */ +#define CFG_ENV_IS_IN_FLASH 1 +#define CFG_ENV_SIZE 0x10000 +#define CFG_ENV_SECT_SIZE 0x20000 +#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR + CFG_ENV_SECT_SIZE) +#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) + +/* + * Memory map + */ +#define CFG_MBAR 0xF0000000 +#define CFG_SDRAM_BASE 0x00000000 +#define CFG_DEFAULT_MBAR 0x80000000 + +/* Use ON-Chip SRAM until RAM will be available */ +#define CFG_INIT_RAM_ADDR MPC5XXX_SRAM +#ifdef CONFIG_POST +/* preserve space for the post_word at end of on-chip SRAM */ +# define CFG_INIT_RAM_END MPC5XXX_SRAM_POST_SIZE +#else +# define CFG_INIT_RAM_END MPC5XXX_SRAM_SIZE +#endif /*CONFIG_POST*/ + +#define CFG_GBL_DATA_SIZE 128 /* Bytes reserved for initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET + +#define CFG_MONITOR_BASE TEXT_BASE +#if (CFG_MONITOR_BASE < CFG_FLASH_BASE) +# define CFG_RAMBOOT 1 +#endif + +#define CFG_MONITOR_LEN (384 << 10) /* Reserve 384 kB for Monitor */ +#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ + +/* + * Ethernet configuration + * + * Define CONFIG_FEC10MBIT to force FEC at 10MBIT + */ +#define CONFIG_MPC5xxx_FEC 1 +#undef CONFIG_FEC_10MBIT +#define CONFIG_PHY_ADDR 0x00 + +/* + * GPIO configuration on BC3450 + * + * PSC1: UART1 (Service-UART) [0x xxxxxxx4] + * PSC2: UART2 [0x xxxxxx4x] + * or: AC/97 if CONFIG_BC3450_AC97 [0x xxxxxx2x] + * PSC3: USB2 [0x xxxxx1xx] + * USB: UART4(ext.)/UART5(int.) [0x xxxx2xxx] + * (this has to match + * CONFIG_USB_CONFIG which is + * used by usb_ohci.c to set + * the USB ports) + * Eth: 10/100Mbit Ethernet [0x xxx0xxxx] + * (this is reset to '5' + * in FEC driver: fec.c) + * PSC6: UART6 (int. to PS/2 contr.) [0x xx5xxxxx] + * ATA/CS: ??? [0x x1xxxxxx] + * FIXME! UM Fig 2-10 suggests [0x x0xxxxxx] + * CS1: Use Pin gpio_wkup_6 as second + * SDRAM chip select (mem_cs1) + * Timer: CAN2 / SPI + * I2C: CAN1 / I²C2 [0x bxxxxxxx] + */ +#ifdef CONFIG_BC3450_AC97 +# define CFG_GPS_PORT_CONFIG 0xb1502124 +#else /* PSC2=UART2 */ +# define CFG_GPS_PORT_CONFIG 0xb1502144 +#endif + +/* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max no of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Arg. Buffer Size */ + +#define CFG_ALT_MEMTEST /* Enable an alternative, */ + /* more extensive mem test */ + +#define CFG_MEMTEST_START 0x00100000 /* memtest works on */ +#define CFG_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */ + +#define CFG_LOAD_ADDR 0x100000 /* default load address */ + +#define CFG_HZ 1000 /* dec freq: 1ms ticks */ + +/* + * Enable loopw commando. This has only affect, if CFG_CMD_MEM is defined, + * which is normally part of the default commands (CFV_CMD_DFL) + */ +#define CONFIG_LOOPW + +/* + * Various low-level settings + */ +#if defined(CONFIG_MPC5200) +# define CFG_HID0_INIT HID0_ICE | HID0_ICFI +# define CFG_HID0_FINAL HID0_ICE +#else +# define CFG_HID0_INIT 0 +# define CFG_HID0_FINAL 0 +#endif + +#define CFG_BOOTCS_START CFG_FLASH_BASE +#define CFG_BOOTCS_SIZE CFG_FLASH_SIZE +#ifdef CFG_PCISPEED_66 +# define CFG_BOOTCS_CFG 0x0008DF30 /* for pci_clk = 66 MHz */ +#else +# define CFG_BOOTCS_CFG 0x0004DF30 /* for pci_clk = 33 MHz */ +#endif +#define CFG_CS0_START CFG_FLASH_BASE +#define CFG_CS0_SIZE CFG_FLASH_SIZE + +/* automatic configuration of chip selects */ +#ifdef CONFIG_TQM5200 +# define CONFIG_LAST_STAGE_INIT +#endif /* CONFIG_TQM5200 */ + +/* + * SRAM - Do not map below 2 GB in address space, because this area is used + * for SDRAM autosizing. + */ +#ifdef CONFIG_TQM5200 +# define CFG_CS2_START 0xE5000000 +# define CFG_CS2_SIZE 0x100000 /* 1 MByte */ +# define CFG_CS2_CFG 0x0004D930 +#endif /* CONFIG_TQM5200 */ + +/* + * Grafic controller - Do not map below 2 GB in address space, because this + * area is used for SDRAM autosizing. + */ +#ifdef CONFIG_TQM5200 +# define SM501_FB_BASE 0xE0000000 +# define CFG_CS1_START (SM501_FB_BASE) +# define CFG_CS1_SIZE 0x4000000 /* 64 MByte */ +# define CFG_CS1_CFG 0x8F48FF70 +# define SM501_MMIO_BASE CFG_CS1_START + 0x03E00000 +#endif /* CONFIG_TQM5200 */ + +#define CFG_CS_BURST 0x00000000 +#define CFG_CS_DEADCYCLE 0x33333311 /* 1 dead cycle for */ + /* flash and SM501 */ + +#define CFG_RESET_ADDRESS 0xff000000 + +/* + * USB stuff + */ +#define CONFIG_USB_CLOCK 0x0001BBBB +#define CONFIG_USB_CONFIG 0x00002000 /* we're using Port 2 */ + +/* + * IDE/ATA stuff Supports IDE harddisk + */ +#undef CONFIG_IDE_8xx_PCCARD /* Use IDE with PC Card Adapter */ + +#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ +#undef CONFIG_IDE_LED /* LED for ide not supported */ + +#define CONFIG_IDE_RESET /* reset for ide supported */ +#define CONFIG_IDE_PREINIT + +#define CFG_IDE_MAXBUS 1 /* max. 1 IDE bus */ +#define CFG_IDE_MAXDEVICE 2 /* max. 2 drives per IDE bus */ + +#define CFG_ATA_IDE0_OFFSET 0x0000 + +#define CFG_ATA_BASE_ADDR MPC5XXX_ATA + +/* Offset for data I/O */ +#define CFG_ATA_DATA_OFFSET (0x0060) + +/* Offset for normal register accesses */ +#define CFG_ATA_REG_OFFSET (CFG_ATA_DATA_OFFSET) + +/* Offset for alternate registers */ +#define CFG_ATA_ALT_OFFSET (0x005C) + +/* Interval between registers */ +#define CFG_ATA_STRIDE 4 + +#endif /* __CONFIG_H */ diff --git a/include/configs/BMW.h b/include/configs/BMW.h index 050054d274..3bd43d8369 100644 --- a/include/configs/BMW.h +++ b/include/configs/BMW.h @@ -69,6 +69,10 @@ CFG_CMD_DOC | \ CFG_CMD_ELF | \ 0 ) + +/* CFG_CMD_DOC required legacy NAND support */ +#define CFG_NAND_LEGACY + #if 0 #define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_DHCP | \ CFG_CMD_PCI | CFG_CMD_DOC | CFG_CMD_DATE) diff --git a/include/configs/CATcenter.h b/include/configs/CATcenter.h index ffe89cb78f..7ec4599ebb 100644 --- a/include/configs/CATcenter.h +++ b/include/configs/CATcenter.h @@ -193,6 +193,8 @@ */ #define CFG_NAND0_BASE 0xFF400000 #define CFG_NAND1_BASE 0xFF000000 +#define CFG_NAND_BASE_LIST { CFG_NAND0_BASE } +#define NAND_BIG_DELAY_US 25 /* For CATcenter there is only NAND on the module */ #define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ @@ -218,9 +220,9 @@ #define CFG_NAND1_RDY (0x80000000 >> 31) /* our RDY is GPIO31 */ -#define NAND_DISABLE_CE(nand) do \ +#define MACRO_NAND_DISABLE_CE(nandptr) do \ { \ - switch((unsigned long)(((struct nand_chip *)nand)->IO_ADDR)) \ + switch((unsigned long)nandptr) \ { \ case CFG_NAND0_BASE: \ out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND0_CE); \ @@ -231,9 +233,9 @@ } \ } while(0) -#define NAND_ENABLE_CE(nand) do \ +#define MACRO_NAND_ENABLE_CE(nandptr) do \ { \ - switch((unsigned long)(((struct nand_chip *)nand)->IO_ADDR)) \ + switch((unsigned long)nandptr) \ { \ case CFG_NAND0_BASE: \ out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND0_CE); \ @@ -244,8 +246,7 @@ } \ } while(0) - -#define NAND_CTL_CLRALE(nandptr) do \ +#define MACRO_NAND_CTL_CLRALE(nandptr) do \ { \ switch((unsigned long)nandptr) \ { \ @@ -258,7 +259,7 @@ } \ } while(0) -#define NAND_CTL_SETALE(nandptr) do \ +#define MACRO_NAND_CTL_SETALE(nandptr) do \ { \ switch((unsigned long)nandptr) \ { \ @@ -271,7 +272,7 @@ } \ } while(0) -#define NAND_CTL_CLRCLE(nandptr) do \ +#define MACRO_NAND_CTL_CLRCLE(nandptr) do \ { \ switch((unsigned long)nandptr) \ { \ @@ -284,7 +285,7 @@ } \ } while(0) -#define NAND_CTL_SETCLE(nandptr) do { \ +#define MACRO_NAND_CTL_SETCLE(nandptr) do { \ switch((unsigned long)nandptr) { \ case CFG_NAND0_BASE: \ out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND0_CLE); \ diff --git a/include/configs/CMS700.h b/include/configs/CMS700.h index 6025886e3e..1cca2859f4 100644 --- a/include/configs/CMS700.h +++ b/include/configs/CMS700.h @@ -81,6 +81,8 @@ /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ #include <cmd_confdefs.h> +#define CFG_NAND_LEGACY + #undef CONFIG_WATCHDOG /* watchdog disabled */ #define CONFIG_SDRAM_BANK0 1 /* init onboard SDRAM bank 0 */ diff --git a/include/configs/CPCI2DP.h b/include/configs/CPCI2DP.h index 756bb8ceac..56fd9a6d35 100644 --- a/include/configs/CPCI2DP.h +++ b/include/configs/CPCI2DP.h @@ -143,8 +143,9 @@ #define CFG_PCI_SUBSYS_VENDORID 0x12FE /* PCI Vendor ID: esd gmbh */ #define CFG_PCI_SUBSYS_DEVICEID 0x040b /* PCI Device ID: CPCI-2DP */ #define CFG_PCI_CLASSCODE 0x0280 /* PCI Class Code: Network/Other*/ -#define CFG_PCI_PTM1LA 0x00000000 /* point to sdram */ -#define CFG_PCI_PTM1MS 0xfc000001 /* 64MB, enable hard-wired to 1 */ + +#define CFG_PCI_PTM1LA (bd->bi_memstart) /* point to sdram */ +#define CFG_PCI_PTM1MS (~(bd->bi_memsize - 1) | 1) /* memsize, enable hard-wired to 1 */ #define CFG_PCI_PTM1PCI 0x00000000 /* Host: use this pci address */ #define CFG_PCI_PTM2LA 0xef000000 /* point to internal regs + PB0/1 */ #define CFG_PCI_PTM2MS 0xff000001 /* 16MB, enable */ @@ -250,14 +251,15 @@ #define CFG_INIT_RAM_ADDR 0x40000000 /* use data cache */ #define CFG_INIT_RAM_END 0x2000 /* End of used area in RAM */ -#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) #define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET /*----------------------------------------------------------------------- * GPIO definitions */ #define CFG_EEPROM_WP (0x80000000 >> 13) /* GPIO13 */ +#define CFG_SELF_RST (0x80000000 >> 14) /* GPIO14 */ #define CFG_PB_LED (0x80000000 >> 16) /* GPIO16 */ #define CFG_INTA_FAKE (0x80000000 >> 23) /* GPIO23 */ diff --git a/include/configs/CPCI405.h b/include/configs/CPCI405.h index d49020db76..047e2f1eef 100644 --- a/include/configs/CPCI405.h +++ b/include/configs/CPCI405.h @@ -79,6 +79,8 @@ /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ #include <cmd_confdefs.h> +#define CFG_NAND_LEGACY + #undef CONFIG_WATCHDOG /* watchdog disabled */ #define CONFIG_SDRAM_BANK0 1 /* init onboard SDRAM bank 0 */ @@ -151,8 +153,8 @@ #define CFG_PCI_SUBSYS_DEVICEID 0x0405 /* PCI Device ID: CPCI-405 */ #define CFG_PCI_SUBSYS_DEVICEID2 0x0406 /* PCI Device ID: CPCI-405-A */ #define CFG_PCI_CLASSCODE 0x0b20 /* PCI Class Code: Processor/PPC*/ -#define CFG_PCI_PTM1LA 0x00000000 /* point to sdram */ -#define CFG_PCI_PTM1MS 0xfc000001 /* 64MB, enable hard-wired to 1 */ +#define CFG_PCI_PTM1LA (bd->bi_memstart) /* point to sdram */ +#define CFG_PCI_PTM1MS (~(bd->bi_memsize - 1) | 1) /* memsize, enable hard-wired to 1 */ #define CFG_PCI_PTM1PCI 0x00000000 /* Host: use this pci address */ #define CFG_PCI_PTM2LA 0xffc00000 /* point to flash */ #define CFG_PCI_PTM2MS 0xffc00001 /* 4MB, enable */ diff --git a/include/configs/CPCI4052.h b/include/configs/CPCI4052.h index 13dbe80daf..d756f447f7 100644 --- a/include/configs/CPCI4052.h +++ b/include/configs/CPCI4052.h @@ -100,6 +100,8 @@ /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ #include <cmd_confdefs.h> +#define CFG_NAND_LEGACY + #undef CONFIG_WATCHDOG /* watchdog disabled */ #define CONFIG_SDRAM_BANK0 1 /* init onboard SDRAM bank 0 */ @@ -178,8 +180,8 @@ #define CFG_PCI_SUBSYS_DEVICEID 0x0405 /* PCI Device ID: CPCI-405 */ #define CFG_PCI_SUBSYS_DEVICEID2 0x0406 /* PCI Device ID: CPCI-405-A */ #define CFG_PCI_CLASSCODE 0x0b20 /* PCI Class Code: Processor/PPC*/ -#define CFG_PCI_PTM1LA 0x00000000 /* point to sdram */ -#define CFG_PCI_PTM1MS 0xfc000001 /* 64MB, enable hard-wired to 1 */ +#define CFG_PCI_PTM1LA (bd->bi_memstart) /* point to sdram */ +#define CFG_PCI_PTM1MS (~(bd->bi_memsize - 1) | 1) /* memsize, enable hard-wired to 1 */ #define CFG_PCI_PTM1PCI 0x00000000 /* Host: use this pci address */ #define CFG_PCI_PTM2LA 0xffc00000 /* point to flash */ #define CFG_PCI_PTM2MS 0xffc00001 /* 4MB, enable */ diff --git a/include/configs/CPCI405AB.h b/include/configs/CPCI405AB.h index aaaafa94fd..852d94a410 100644 --- a/include/configs/CPCI405AB.h +++ b/include/configs/CPCI405AB.h @@ -87,6 +87,9 @@ /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ #include <cmd_confdefs.h> +#define CFG_NAND_LEGACY + + #undef CONFIG_WATCHDOG /* watchdog disabled */ #define CONFIG_SDRAM_BANK0 1 /* init onboard SDRAM bank 0 */ @@ -161,8 +164,8 @@ #define CFG_PCI_SUBSYS_DEVICEID 0x0405 /* PCI Device ID: CPCI-405 */ #define CFG_PCI_SUBSYS_DEVICEID2 0x0406 /* PCI Device ID: CPCI-405-A */ #define CFG_PCI_CLASSCODE 0x0b20 /* PCI Class Code: Processor/PPC*/ -#define CFG_PCI_PTM1LA 0x00000000 /* point to sdram */ -#define CFG_PCI_PTM1MS 0xfc000001 /* 64MB, enable hard-wired to 1 */ +#define CFG_PCI_PTM1LA (bd->bi_memstart) /* point to sdram */ +#define CFG_PCI_PTM1MS (~(bd->bi_memsize - 1) | 1) /* memsize, enable hard-wired to 1 */ #define CFG_PCI_PTM1PCI 0x00000000 /* Host: use this pci address */ #define CFG_PCI_PTM2LA 0xffc00000 /* point to flash */ #define CFG_PCI_PTM2MS 0xffc00001 /* 4MB, enable */ diff --git a/include/configs/CPCI405DT.h b/include/configs/CPCI405DT.h index 5cd9aba9e5..2260327c3f 100644 --- a/include/configs/CPCI405DT.h +++ b/include/configs/CPCI405DT.h @@ -98,6 +98,8 @@ /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ #include <cmd_confdefs.h> +#define CFG_NAND_LEGACY + #undef CONFIG_WATCHDOG /* watchdog disabled */ #define CONFIG_SDRAM_BANK0 1 /* init onboard SDRAM bank 0 */ @@ -183,8 +185,8 @@ #define CFG_PCI_SUBSYS_DEVICEID 0x0405 /* PCI Device ID: CPCI-405 */ #define CFG_PCI_SUBSYS_DEVICEID2 0x0406 /* PCI Device ID: CPCI-405-A */ #define CFG_PCI_CLASSCODE 0x0b20 /* PCI Class Code: Processor/PPC*/ -#define CFG_PCI_PTM1LA 0x00000000 /* point to sdram */ -#define CFG_PCI_PTM1MS 0xfc000001 /* 64MB, enable hard-wired to 1 */ +#define CFG_PCI_PTM1LA (bd->bi_memstart) /* point to sdram */ +#define CFG_PCI_PTM1MS (~(bd->bi_memsize - 1) | 1) /* memsize, enable hard-wired to 1 */ #define CFG_PCI_PTM1PCI 0x00000000 /* Host: use this pci address */ #define CFG_PCI_PTM2LA 0xffc00000 /* point to flash */ #define CFG_PCI_PTM2MS 0xffc00001 /* 4MB, enable */ diff --git a/include/configs/CPCI750.h b/include/configs/CPCI750.h index 8bfd0ee820..244e45a750 100644 --- a/include/configs/CPCI750.h +++ b/include/configs/CPCI750.h @@ -12,7 +12,7 @@ * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License @@ -57,7 +57,7 @@ #define CONFIG_CPCI750 1 /* this is an CPCI750 board */ -#define CONFIG_BAUDRATE 9600 /* console baudrate = 9600 */ +#define CONFIG_BAUDRATE 9600 /* console baudrate = 9600 */ #undef CONFIG_ECC /* enable ECC support */ @@ -70,10 +70,12 @@ #define CONFIG_IDENT_STRING "Marvell 64360 + IBM750FX" /*#define CFG_HUSH_PARSER*/ -#undef CFG_HUSH_PARSER +#define CFG_HUSH_PARSER #define CFG_PROMPT_HUSH_PS2 "> " +#define CFG_AUTO_COMPLETE 1 + /* Define which ETH port will be used for connecting the network */ #define CFG_ETH_PORT ETH_0 @@ -82,19 +84,19 @@ * for your console driver. * * what to do: - * to use the DUART, undef CONFIG_MPSC. If you have hacked a serial + * to use the DUART, undef CONFIG_MPSC. If you have hacked a serial * cable onto the second DUART channel, change the CFG_DUART port from 1 * to 0 below. * * to use the MPSC, #define CONFIG_MPSC. If you have wired up another * mpsc channel, change CONFIG_MPSC_PORT to the desired value. */ -#define CONFIG_MPSC +#define CONFIG_MPSC #define CONFIG_MPSC_PORT 0 /* to change the default ethernet port, use this define (options: 0, 1, 2) */ #define CONFIG_NET_MULTI -#define MV_ETH_DEVS 1 +#define MV_ETH_DEVS 1 #define CONFIG_ETHER_PORT 0 #undef CONFIG_ETHER_PORT_MII /* use RMII */ @@ -116,38 +118,38 @@ #define CONFIG_SERIAL "AA000001" #define CONFIG_SERVERIP "10.0.0.79" -#define CONFIG_ROOTPATH "/export/nfs_cpci750/%s" +#define CONFIG_ROOTPATH "/export/nfs_cpci750/%s" #define CONFIG_TESTDRAMDATA y -#define CONFIG_TESTDRAMADDRESS n +#define CONFIG_TESTDRAMADDRESS n #define CONFIG_TESETDRAMWALK n /* ----------------------------------------------------------------------------- */ -#define CONFIG_LOADS_ECHO 0 /* echo off for serial download */ -#define CFG_LOADS_BAUD_CHANGE /* allow baudrate changes */ +#define CONFIG_LOADS_ECHO 0 /* echo off for serial download */ +#define CFG_LOADS_BAUD_CHANGE /* allow baudrate changes */ #undef CONFIG_WATCHDOG /* watchdog disabled */ -#undef CONFIG_ALTIVEC /* undef to disable */ +#undef CONFIG_ALTIVEC /* undef to disable */ #define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | \ CONFIG_BOOTP_BOOTFILESIZE) -#define CONFIG_COMMANDS (CONFIG_CMD_DFL \ +#define CONFIG_COMMANDS (CONFIG_CMD_DFL \ | CFG_CMD_ASKENV \ - | CFG_CMD_I2C \ + | CFG_CMD_I2C \ | CFG_CMD_CACHE \ | CFG_CMD_EEPROM \ - | CFG_CMD_PCI \ + | CFG_CMD_PCI \ | CFG_CMD_ELF \ | CFG_CMD_DATE \ - | CFG_CMD_NET \ - | CFG_CMD_PING \ - | CFG_CMD_IDE \ - | CFG_CMD_FAT \ - | CFG_CMD_EXT2 \ + | CFG_CMD_NET \ + | CFG_CMD_PING \ + | CFG_CMD_IDE \ + | CFG_CMD_FAT \ + | CFG_CMD_EXT2 \ ) #define CONFIG_DOS_PARTITION @@ -155,28 +157,40 @@ /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ #include <cmd_confdefs.h> +#define CONFIG_USE_CPCIDVI + +#ifdef CONFIG_USE_CPCIDVI +#define CONFIG_VIDEO +#define CONFIG_VIDEO_CT69000 +#define CONFIG_CFB_CONSOLE +#define CONFIG_VIDEO_SW_CURSOR +#define CONFIG_VIDEO_LOGO +#define CONFIG_I8042_KBD +#define CFG_ISA_IO 0 +#endif + /* * Miscellaneous configurable options */ #define CFG_I2C_EEPROM_ADDR_LEN 2 #define CFG_I2C_MULTI_EEPROMS -#define CFG_I2C_SPEED 80000 /* I2C speed default */ +#define CFG_I2C_SPEED 80000 /* I2C speed default */ #define CFG_GT_DUAL_CPU /* also for JTAG even with one cpu */ -#define CFG_LONGHELP /* undef to save memory */ -#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ #if (CONFIG_COMMANDS & CFG_CMD_KGDB) -#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else -#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ #endif -#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ -#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ #define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ /*#define CFG_MEMTEST_START 0x00400000*/ /* memtest works on */ /*#define CFG_MEMTEST_END 0x00C00000*/ /* 4 ... 12 MB in DRAM */ -/*#define CFG_MEMTEST_END 0x07c00000*/ /* 4 ... 124 MB in DRAM */ +/*#define CFG_MEMTEST_END 0x07c00000*/ /* 4 ... 124 MB in DRAM */ /* #define CFG_DRAM_TEST @@ -184,21 +198,21 @@ * CFG_DRAM_TEST - enables the following tests. * * CFG_DRAM_TEST_DATA - Enables test for shorted or open data lines - * Environment variable 'test_dram_data' must be - * set to 'y'. + * Environment variable 'test_dram_data' must be + * set to 'y'. * CFG_DRAM_TEST_DATA - Enables test to verify that each word is uniquely - * addressable. Environment variable - * 'test_dram_address' must be set to 'y'. + * addressable. Environment variable + * 'test_dram_address' must be set to 'y'. * CFG_DRAM_TEST_WALK - Enables test a 64-bit walking ones pattern test. - * This test takes about 6 minutes to test 64 MB. - * Environment variable 'test_dram_walk' must be - * set to 'y'. + * This test takes about 6 minutes to test 64 MB. + * Environment variable 'test_dram_walk' must be + * set to 'y'. */ #define CFG_DRAM_TEST #if defined(CFG_DRAM_TEST) #define CFG_MEMTEST_START 0x00400000 /* memtest works on */ /*#define CFG_MEMTEST_END 0x00C00000*/ /* 4 ... 12 MB in DRAM */ -#define CFG_MEMTEST_END 0x07c00000 /* 4 ... 124 MB in DRAM */ +#define CFG_MEMTEST_END 0x07c00000 /* 4 ... 124 MB in DRAM */ #define CFG_DRAM_TEST_DATA #define CFG_DRAM_TEST_ADDRESS #define CFG_DRAM_TEST_WALK @@ -207,10 +221,10 @@ #define CONFIG_DISPLAY_MEMMAP /* at the end of the bootprocess show the memory map */ #undef CFG_DISPLAY_DIMM_SPD_CONTENT /* show SPD content during boot */ -#define CFG_LOAD_ADDR 0x00300000 /* default load address */ +#define CFG_LOAD_ADDR 0x00300000 /* default load address */ -#define CFG_HZ 1000 /* decr freq: 1ms ticks */ -#define CFG_BUS_HZ 133000000 /* 133 MHz (CPU = 5*Bus = 666MHz) */ +#define CFG_HZ 1000 /* decr freq: 1ms ticks */ +#define CFG_BUS_HZ 133000000 /* 133 MHz (CPU = 5*Bus = 666MHz) */ #define CFG_BUS_CLK CFG_BUS_HZ #define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } @@ -237,7 +251,7 @@ * To an unused memory region. The stack will remain in cache until RAM * is initialized */ -#undef CFG_INIT_RAM_LOCK +#undef CFG_INIT_RAM_LOCK /* #define CFG_INIT_RAM_ADDR 0x40000000*/ /* unused memory region */ /* #define CFG_INIT_RAM_ADDR 0xfba00000*/ /* unused memory region */ #define CFG_INIT_RAM_ADDR 0xf1080000 /* unused memory region */ @@ -247,7 +261,7 @@ #define RELOCATE_INTERNAL_RAM_ADDR #ifdef RELOCATE_INTERNAL_RAM_ADDR -/*#define CFG_INTERNAL_RAM_ADDR 0xfba00000*/ +/*#define CFG_INTERNAL_RAM_ADDR 0xfba00000*/ #define CFG_INTERNAL_RAM_ADDR 0xf1080000 #endif @@ -256,28 +270,34 @@ * (Set up by the startup code) * Please note that CFG_SDRAM_BASE _must_ start at 0 */ -#define CFG_SDRAM_BASE 0x00000000 +#define CFG_SDRAM_BASE 0x00000000 /* Dummies for BAT 4-7 */ -#define CFG_SDRAM1_BASE 0x10000000 /* each 256 MByte */ -#define CFG_SDRAM2_BASE 0x20000000 -#define CFG_SDRAM3_BASE 0x30000000 -#define CFG_SDRAM4_BASE 0x40000000 +#define CFG_SDRAM1_BASE 0x10000000 /* each 256 MByte */ +#define CFG_SDRAM2_BASE 0x20000000 +#define CFG_SDRAM3_BASE 0x30000000 +#define CFG_SDRAM4_BASE 0x40000000 #define CFG_RESET_ADDRESS 0xfff00100 -#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ +#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ #define CFG_MONITOR_BASE 0xfff00000 -#define CFG_MALLOC_LEN (128 << 10) /* Reserve 256 kB for malloc */ +#define CFG_MALLOC_LEN (128 << 10) /* Reserve 256 kB for malloc */ /*----------------------------------------------------------------------- * FLASH related *----------------------------------------------------------------------*/ +#define CFG_FLASH_CFI_DRIVER #define CFG_FLASH_CFI 1 /* Flash is CFI conformant */ -#define CFG_MAX_FLASH_SECT 128 /* max number of sectors on one chip */ -#define CFG_MAX_FLASH_BANKS 4 /* max number of memory banks */ -#define CFG_FLASH_INCREMENT 0x01000000 /* there is only one bank */ #define CFG_FLASH_PROTECTION 1 /* use hardware protection */ #define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */ -#define CFG_FLASH_BASE 0xfc000000 /* start of flash banks */ +#define CFG_FLASH_BASE 0xfc000000 /* start of flash banks */ +#define CFG_MAX_FLASH_BANKS 4 /* max number of memory banks */ +#define CFG_FLASH_INCREMENT 0x01000000 /* size of flash bank */ +#define CFG_MAX_FLASH_SECT 128 /* max number of sectors on one chip */ +#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE, \ + CFG_FLASH_BASE + 1*CFG_FLASH_INCREMENT, \ + CFG_FLASH_BASE + 2*CFG_FLASH_INCREMENT, \ + CFG_FLASH_BASE + 3*CFG_FLASH_INCREMENT } +#define CFG_FLASH_EMPTY_INFO 1 /* show if bank is empty */ /* areas to map different things with the GT in physical space */ #define CFG_DRAM_BANKS 4 @@ -288,20 +308,20 @@ /* Peripheral Device section */ /*******************************************************/ -/* We have on the cpci750 Board : */ -/* GT-Chipset Register Area */ -/* GT-Chipset internal SRAM 256k */ -/* SRAM on external device module */ -/* Real time clock on external device module */ -/* dobble UART on external device module */ -/* Data flash on external device module */ -/* Boot flash on external device module */ +/* We have on the cpci750 Board : */ +/* GT-Chipset Register Area */ +/* GT-Chipset internal SRAM 256k */ +/* SRAM on external device module */ +/* Real time clock on external device module */ +/* dobble UART on external device module */ +/* Data flash on external device module */ +/* Boot flash on external device module */ /*******************************************************/ #define CFG_DFL_GT_REGS 0x14000000 /* boot time GT_REGS */ -#define CFG_CPCI750_RESET_ADDR 0x14000000 /* After power on Reset the CPCI750 is here */ +#define CFG_CPCI750_RESET_ADDR 0x14000000 /* After power on Reset the CPCI750 is here */ -#undef MARVEL_STANDARD_CFG -#ifndef MARVEL_STANDARD_CFG +#undef MARVEL_STANDARD_CFG +#ifndef MARVEL_STANDARD_CFG /*++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/ #define CFG_GT_REGS 0xf1000000 /* GT Registers will be mapped here */ /*#define CFG_DEV_BASE 0xfc000000*/ /* GT Devices CS start here */ @@ -313,11 +333,11 @@ #define CFG_DEV2_SPACE 0xfe000000 /* DEV_CS2 flash 3 */ #define CFG_DEV3_SPACE 0xf0000000 /* DEV_CS3 nvram/can */ -#define CFG_BOOT_SIZE _16M /* cpci750 flash 0 */ -#define CFG_DEV0_SIZE _16M /* cpci750 flash 1 */ -#define CFG_DEV1_SIZE _16M /* cpci750 flash 2 */ -#define CFG_DEV2_SIZE _16M /* cpci750 flash 3 */ -#define CFG_DEV3_SIZE _16M /* cpci750 nvram/can */ +#define CFG_BOOT_SIZE _16M /* cpci750 flash 0 */ +#define CFG_DEV0_SIZE _16M /* cpci750 flash 1 */ +#define CFG_DEV1_SIZE _16M /* cpci750 flash 2 */ +#define CFG_DEV2_SIZE _16M /* cpci750 flash 3 */ +#define CFG_DEV3_SIZE _16M /* cpci750 nvram/can */ /*++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/ #endif @@ -326,22 +346,22 @@ #define CFG_DEV0_PAR 0x8FDFFFFF /* 16 bit flash */ #define CFG_DEV1_PAR 0x8FDFFFFF /* 16 bit flash */ #define CFG_DEV2_PAR 0x8FDFFFFF /* 16 bit flash */ -#define CFG_DEV3_PAR 0x8FCFFFFF /* nvram/can */ +#define CFG_DEV3_PAR 0x8FCFFFFF /* nvram/can */ #define CFG_BOOT_PAR 0x8FDFFFFF /* 16 bit flash */ - /* c 4 a 8 2 4 1 c */ - /* 33 22|2222|22 22|111 1|11 11|1 1 | | */ + /* c 4 a 8 2 4 1 c */ + /* 33 22|2222|22 22|111 1|11 11|1 1 | | */ /* 10 98|7654|32 10|987 6|54 32|1 098|7 654|3 210 */ /* 11|00|0100|10 10|100|0 00|10 0|100 0|001 1|100 */ /* 3| 0|.... ..| 2| 4 | 0 | 4 | 8 | 3 | 4 */ /* MPP Control MV64360 Appendix P P. 632*/ -#define CFG_MPP_CONTROL_0 0x00002222 /* */ -#define CFG_MPP_CONTROL_1 0x11110000 /* */ -#define CFG_MPP_CONTROL_2 0x11111111 /* */ -#define CFG_MPP_CONTROL_3 0x00001111 /* */ -/* #define CFG_SERIAL_PORT_MUX 0x00000102*/ /* */ +#define CFG_MPP_CONTROL_0 0x00002222 /* */ +#define CFG_MPP_CONTROL_1 0x11110000 /* */ +#define CFG_MPP_CONTROL_2 0x11111111 /* */ +#define CFG_MPP_CONTROL_3 0x00001111 /* */ +/* #define CFG_SERIAL_PORT_MUX 0x00000102*/ /* */ #define CFG_GPP_LEVEL_CONTROL 0xffffffff /* 1111 1111 1111 1111 1111 1111 1111 1111*/ @@ -358,12 +378,12 @@ ECC disable non registered DRAM */ /* 31:26 25:22 21:20 19 18 17 16 */ - /* 100001 0000 010 0 0 0 0 */ + /* 100001 0000 010 0 0 0 0 */ /* refresh_count=0x400 phisical interleaving disable virtual interleaving enable */ /* 15 14 13:0 */ - /* 0 1 0x400 */ + /* 0 1 0x400 */ # define CFG_SDRAM_CONFIG 0x58200400 /* 0x1400 copied from Dink32 bzw. VxWorks*/ @@ -372,14 +392,14 @@ *----------------------------------------------------------------------- */ -#define PCI_HOST_ADAPTER 0 /* configure ar pci adapter */ -#define PCI_HOST_FORCE 1 /* configure as pci host */ -#define PCI_HOST_AUTO 2 /* detected via arbiter enable */ +#define PCI_HOST_ADAPTER 0 /* configure ar pci adapter */ +#define PCI_HOST_FORCE 1 /* configure as pci host */ +#define PCI_HOST_AUTO 2 /* detected via arbiter enable */ -#define CONFIG_PCI /* include pci support */ -#define CONFIG_PCI_HOST PCI_HOST_FORCE /* select pci host function */ -#define CONFIG_PCI_PNP /* do pci plug-and-play */ -#define CONFIG_PCI_SCAN_SHOW /* show devices on bus */ +#define CONFIG_PCI /* include pci support */ +#define CONFIG_PCI_HOST PCI_HOST_FORCE /* select pci host function */ +#define CONFIG_PCI_PNP /* do pci plug-and-play */ +#define CONFIG_PCI_SCAN_SHOW /* show devices on bus */ /* PCI MEMORY MAP section */ #define CFG_PCI0_MEM_BASE 0x80000000 @@ -401,6 +421,8 @@ #define CFG_PCI1_IO_SPACE (CFG_PCI1_IO_BASE) #define CFG_PCI1_IO_SPACE_PCI 0x00000000 +#define CFG_ISA_IO_BASE_ADDRESS (CFG_PCI0_IO_BASE) + #if defined (CONFIG_750CX) #define CFG_PCI_IDSEL 0x0 #else @@ -411,21 +433,21 @@ * IDE/ATA stuff *----------------------------------------------------------------------- */ -#undef CONFIG_IDE_8xx_DIRECT /* no pcmcia interface required */ -#undef CONFIG_IDE_LED /* no led for ide supported */ -#define CONFIG_IDE_RESET /* no reset for ide supported */ -#define CONFIG_IDE_PREINIT /* check for units */ +#undef CONFIG_IDE_8xx_DIRECT /* no pcmcia interface required */ +#undef CONFIG_IDE_LED /* no led for ide supported */ +#define CONFIG_IDE_RESET /* no reset for ide supported */ +#define CONFIG_IDE_PREINIT /* check for units */ -#define CFG_IDE_MAXBUS 2 /* max. 1 IDE busses */ -#define CFG_IDE_MAXDEVICE (CFG_IDE_MAXBUS*2) /* max. 1 drives per IDE bus */ +#define CFG_IDE_MAXBUS 2 /* max. 1 IDE busses */ +#define CFG_IDE_MAXDEVICE (CFG_IDE_MAXBUS*2) /* max. 1 drives per IDE bus */ -#define CFG_ATA_BASE_ADDR 0 -#define CFG_ATA_IDE0_OFFSET 0 -#define CFG_ATA_IDE1_OFFSET 0 +#define CFG_ATA_BASE_ADDR 0 +#define CFG_ATA_IDE0_OFFSET 0 +#define CFG_ATA_IDE1_OFFSET 0 -#define CFG_ATA_DATA_OFFSET 0x0000 /* Offset for data I/O */ -#define CFG_ATA_REG_OFFSET 0x0000 /* Offset for normal register accesses */ -#define CFG_ATA_ALT_OFFSET 0x0000 /* Offset for alternate registers */ +#define CFG_ATA_DATA_OFFSET 0x0000 /* Offset for data I/O */ +#define CFG_ATA_REG_OFFSET 0x0000 /* Offset for normal register accesses */ +#define CFG_ATA_ALT_OFFSET 0x0000 /* Offset for alternate registers */ /*---------------------------------------------------------------------- @@ -529,7 +551,7 @@ * have to be in the first 8 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization. */ -#define CFG_BOOTMAPSZ (8<<20) /* Initial Memory map for Linux */ +#define CFG_BOOTMAPSZ (8<<20) /* Initial Memory map for Linux */ /*----------------------------------------------------------------------- * FLASH organization @@ -541,23 +563,23 @@ #define CFG_FLASH_LOCK_TOUT 500 /* Timeout for Flash Lock (in ms) */ #if 0 -#define CFG_ENV_IS_IN_FLASH 0 -#define CFG_ENV_SIZE 0x1000 /* Total Size of Environment Sector */ +#define CFG_ENV_IS_IN_FLASH 0 +#define CFG_ENV_SIZE 0x1000 /* Total Size of Environment Sector */ #define CFG_ENV_SECT_SIZE 0x10000 #define CFG_ENV_ADDR 0xFFF78000 /* Marvell 8-Bit Bootflash last sector */ -/* #define CFG_ENV_ADDR (CFG_FLASH_BASE+CFG_MONITOR_LEN-CFG_ENV_SECT_SIZE) */ +/* #define CFG_ENV_ADDR (CFG_FLASH_BASE+CFG_MONITOR_LEN-CFG_ENV_SECT_SIZE) */ #endif #define CFG_ENV_IS_IN_EEPROM 1 /* use EEPROM for environment vars */ #define CFG_EEPROM_PAGE_WRITE_BITS 5 #define CFG_EEPROM_PAGE_WRITE_DELAY_MS 20 -#define CFG_I2C_EEPROM_ADDR 0x050 +#define CFG_I2C_EEPROM_ADDR 0x050 #define CFG_ENV_OFFSET 0x200 /* environment starts at the beginning of the EEPROM */ #define CFG_ENV_SIZE 0x600 /* 2048 bytes may be used for env vars*/ #define CFG_NVRAM_BASE_ADDR 0xf0000000 /* NVRAM base address */ #define CFG_NVRAM_SIZE (32*1024) /* NVRAM size */ -#define CFG_VXWORKS_MAC_PTR (CFG_NVRAM_BASE_ADDR+CFG_NVRAM_SIZE-0x40) +#define CFG_VXWORKS_MAC_PTR (CFG_NVRAM_BASE_ADDR+CFG_NVRAM_SIZE-0x40) /*----------------------------------------------------------------------- * Cache Configuration @@ -579,7 +601,7 @@ #if defined (CONFIG_750CX) || defined (CONFIG_750FX) #define L2_INIT 0 #else -#define L2_INIT (L2CR_L2SIZ_2M | L2CR_L2CLK_3 | L2CR_L2RAM_BURST | \ +#define L2_INIT (L2CR_L2SIZ_2M | L2CR_L2CLK_3 | L2CR_L2RAM_BURST | \ L2CR_L2OH_5 | L2CR_L2CTL | L2CR_L2WT) #endif @@ -590,9 +612,9 @@ * * Boot Flags */ -#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#define CFG_BOARD_ASM_INIT 1 +#define CFG_BOARD_ASM_INIT 1 #endif /* __CONFIG_H */ diff --git a/include/configs/CPU87.h b/include/configs/CPU87.h index a23d7e50b7..9a98e5c191 100644 --- a/include/configs/CPU87.h +++ b/include/configs/CPU87.h @@ -189,6 +189,8 @@ /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ #include <cmd_confdefs.h> +#define CFG_NAND_LEGACY + /* * Miscellaneous configurable options */ diff --git a/include/configs/EB+MCF-EV123.h b/include/configs/EB+MCF-EV123.h new file mode 100644 index 0000000000..720b335b09 --- /dev/null +++ b/include/configs/EB+MCF-EV123.h @@ -0,0 +1,223 @@ +/* + * Configuation settings for the BuS EB+MCF-EV123 boards. + * + * (C) Copyright 2005 BuS Elektronik GmbH & Co.KG <esw@bus-elektonik.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _CONFIG_EB_MCF_EV123_H_ +#define _CONFIG_EB_MCF_EV123_H_ + +#define CONFIG_EB_MCF_EV123 + +#undef DEBUG +#undef CFG_HALT_BEFOR_RAM_JUMP +#undef ET_DEBUG + +/* + * High Level Configuration Options (easy to change) + */ + +#define CONFIG_MCF52x2 /* define processor family */ +#define CONFIG_M5282 /* define processor type */ + +#define CONFIG_MISC_INIT_R + +#define FEC_ENET +#define CONFIG_ETHADDR 00:CF:52:82:EB:01 + +#define CONFIG_BAUDRATE 9600 +#define CFG_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 } + +#undef CONFIG_MONITOR_IS_IN_RAM /* define if monitor is started from a pre-loader */ + +#define CONFIG_BOOTCOMMAND "printenv" + +/* Configuration for environment + * Environment is embedded in u-boot in the second sector of the flash + */ +#ifndef CONFIG_MONITOR_IS_IN_RAM +#define CFG_ENV_ADDR 0xF003C000 /* End of 256K */ +#define CFG_ENV_SECT_SIZE 0x4000 +#define CFG_ENV_IS_IN_FLASH 1 +/* +#define CFG_ENV_IS_EMBEDDED 1 +#define CFG_ENV_ADDR_REDUND 0xF0018000 +#define CFG_ENV_SECT_SIZE_REDUND 0x4000 +*/ +#else +#define CFG_ENV_ADDR 0xFFE04000 +#define CFG_ENV_SECT_SIZE 0x2000 +#define CFG_ENV_IS_IN_FLASH 1 +#endif + +/*#define CONFIG_COMMANDS ( CONFIG_CMD_DFL & ~(CFG_CMD_LOADS | CFG_CMD_LOADB) ) */ +#define CONFIG_COMMANDS ( CONFIG_CMD_DFL & ~(CFG_CMD_LOADB)) + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include <cmd_confdefs.h> + +#define CONFIG_BOOTDELAY 5 +#define CFG_PROMPT "\nEV123 U-Boot> " +#define CFG_LONGHELP /* undef to save memory */ + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_LOAD_ADDR 0x20000 + +#define CFG_MEMTEST_START 0x100000 +#define CFG_MEMTEST_END 0x400000 +/*#define CFG_DRAM_TEST 1 */ +#undef CFG_DRAM_TEST + +/* Clock and PLL Configuration */ +#define CFG_HZ 10000000 +#define CFG_CLK 58982400 /* 9,8304MHz * 6 */ + +/* PLL Configuration: Ext Clock * 6 (see table 9-4 of MCF user manual) */ + +#define CFG_MFD 0x01 /* PLL Multiplication Factor Devider */ +#define CFG_RFD 0x00 /* PLL Reduce Frecuency Devider */ + +/* + * Low Level Configuration Settings + * (address mappings, register initial values, etc.) + * You should know what you are doing if you make changes here. + */ +#define CFG_MBAR 0x40000000 + +#define CFG_DISCOVER_PHY +/* #define CFG_ENET_BD_BASE 0x380000 */ + +/*----------------------------------------------------------------------- + * Definitions for initial stack pointer and data area (in DPRAM) + */ +#define CFG_INIT_RAM_ADDR 0x20000000 +#define CFG_INIT_RAM_END 0x10000 /* End of used area in internal SRAM */ +#define CFG_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET + +/*----------------------------------------------------------------------- + * Start addresses for the final memory configuration + * (Set up by the startup code) + * Please note that CFG_SDRAM_BASE _must_ start at 0 + */ +#define CFG_SDRAM_BASE1 0x00000000 +#define CFG_SDRAM_SIZE1 16 /* SDRAM size in MB */ + +/* +#define CFG_SDRAM_BASE0 CFG_SDRAM_BASE1+CFG_SDRAM_SIZE1*1024*1024 +#define CFG_SDRAM_SIZE0 16 */ /* SDRAM size in MB */ + +#define CFG_SDRAM_BASE CFG_SDRAM_BASE1 +#define CFG_SDRAM_SIZE CFG_SDRAM_SIZE1 + +#define CFG_FLASH_BASE 0xFFE00000 +#define CFG_INT_FLASH_BASE 0xF0000000 + +/* If M5282 port is fully implemented the monitor base will be behind + * the vector table. */ +#if (TEXT_BASE != CFG_INT_FLASH_BASE) +#define CFG_MONITOR_BASE (TEXT_BASE + 0x400) +#else +#define CFG_MONITOR_BASE (TEXT_BASE + 0x418) /* 24 Byte for CFM-Config */ +#endif + +#define CFG_MONITOR_LEN 0x20000 +#define CFG_MALLOC_LEN (256 << 10) +#define CFG_BOOTPARAMS_LEN 64*1024 + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization ?? + */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ + +/*----------------------------------------------------------------------- + * FLASH organization + */ +#define CFG_MAX_FLASH_SECT 35 +#define CFG_MAX_FLASH_BANKS 2 +#define CFG_FLASH_ERASE_TOUT 10000000 +#define CFG_FLASH_PROTECTION + +/*----------------------------------------------------------------------- + * Cache Configuration + */ +#define CFG_CACHELINE_SIZE 16 + +/*----------------------------------------------------------------------- + * Memory bank definitions + */ + +#define CFG_CS0_BASE CFG_FLASH_BASE +#define CFG_CS0_SIZE 2*1024*1024 +#define CFG_CS0_WIDTH 16 +#define CFG_CS0_RO 0 +#define CFG_CS0_WS 6 + +#define CFG_CS3_BASE 0xE0000000 +#define CFG_CS3_SIZE 1*1024*1024 +#define CFG_CS3_WIDTH 16 +#define CFG_CS3_RO 0 +#define CFG_CS3_WS 6 + +/*----------------------------------------------------------------------- + * Port configuration + */ +#define CFG_PACNT 0x0000000 /* Port A D[31:24] */ +#define CFG_PADDR 0x0000000 +#define CFG_PADAT 0x0000000 + +#define CFG_PBCNT 0x0000000 /* Port B D[23:16] */ +#define CFG_PBDDR 0x0000000 +#define CFG_PBDAT 0x0000000 + +#define CFG_PCCNT 0x0000000 /* Port C D[15:08] */ +#define CFG_PCDDR 0x0000000 +#define CFG_PCDAT 0x0000000 + +#define CFG_PDCNT 0x0000000 /* Port D D[07:00] */ +#define CFG_PCDDR 0x0000000 +#define CFG_PCDAT 0x0000000 + +#define CFG_PEHLPAR 0xC0 +#define CFG_PUAPAR 0x0F /* UA0..UA3 = Uart 0 +1 */ +#define CFG_DDRUA 0x05 +#define CFG_PJPAR 0xFF; + +/*----------------------------------------------------------------------- + * CCM configuration + */ + +#define CFG_CCM_SIZ 0 + +/*---------------------------------------------------------------------*/ +#endif /* _CONFIG_M5282EVB_H */ +/*---------------------------------------------------------------------*/ diff --git a/include/configs/EP1C20.h b/include/configs/EP1C20.h new file mode 100644 index 0000000000..5507f352b9 --- /dev/null +++ b/include/configs/EP1C20.h @@ -0,0 +1,199 @@ +/* + * (C) Copyright 2005, Psyent Corporation <www.psyent.com> + * Scott McNutt <smcnutt@psyent.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/*------------------------------------------------------------------------ + * BOARD/CPU + *----------------------------------------------------------------------*/ +#define CONFIG_EP1C20 1 /* EP1C20 board */ +#define CONFIG_SYS_CLK_FREQ 50000000 /* 50 MHz core clk */ + +#define CFG_RESET_ADDR 0x00000000 /* Hard-reset address */ +#define CFG_EXCEPTION_ADDR 0x01000020 /* Exception entry point*/ +#define CFG_NIOS_SYSID_BASE 0x021208b8 /* System id address */ +#define CONFIG_BOARD_EARLY_INIT_F 1 /* enable early board-spec. init*/ + +/*------------------------------------------------------------------------ + * CACHE -- the following will support II/s and II/f. The II/s does not + * have dcache, so the cache instructions will behave as NOPs. + *----------------------------------------------------------------------*/ +#define CFG_ICACHE_SIZE 4096 /* 4 KByte total */ +#define CFG_ICACHELINE_SIZE 32 /* 32 bytes/line */ +#define CFG_DCACHE_SIZE 2048 /* 2 KByte (II/f) */ +#define CFG_DCACHELINE_SIZE 4 /* 4 bytes/line (II/f) */ + +/*------------------------------------------------------------------------ + * MEMORY BASE ADDRESSES + *----------------------------------------------------------------------*/ +#define CFG_FLASH_BASE 0x00000000 /* FLASH base addr */ +#define CFG_FLASH_SIZE 0x00800000 /* 8 MByte */ +#define CFG_SDRAM_BASE 0x01000000 /* SDRAM base addr */ +#define CFG_SDRAM_SIZE 0x01000000 /* 16 MByte */ +#define CFG_SRAM_BASE 0x02000000 /* SRAM base addr */ +#define CFG_SRAM_SIZE 0x00100000 /* 1 MB (only 1M mapped)*/ + +/*------------------------------------------------------------------------ + * MEMORY ORGANIZATION + * -Monitor at top. + * -The heap is placed below the monitor. + * -Global data is placed below the heap. + * -The stack is placed below global data (&grows down). + *----------------------------------------------------------------------*/ +#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 128k */ +#define CFG_GBL_DATA_SIZE 128 /* Global data size rsvd*/ +#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024) + +#define CFG_MONITOR_BASE TEXT_BASE +#define CFG_MALLOC_BASE (CFG_MONITOR_BASE - CFG_MALLOC_LEN) +#define CFG_GBL_DATA_OFFSET (CFG_MALLOC_BASE - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP CFG_GBL_DATA_OFFSET + +/*------------------------------------------------------------------------ + * FLASH (AM29LV065D) + *----------------------------------------------------------------------*/ +#define CFG_MAX_FLASH_SECT 128 /* Max # sects per bank */ +#define CFG_MAX_FLASH_BANKS 1 /* Max # of flash banks */ +#define CFG_FLASH_ERASE_TOUT 8000 /* Erase timeout (msec) */ +#define CFG_FLASH_WRITE_TOUT 100 /* Write timeout (msec) */ +#define CFG_FLASH_WORD_SIZE unsigned char /* flash word size */ + +/*------------------------------------------------------------------------ + * ENVIRONMENT -- Put environment in sector CFG_MONITOR_LEN above + * CFG_RESET_ADDR, since we assume the monitor is stored at the + * reset address, no? This will keep the environment in user region + * of flash. NOTE: the monitor length must be multiple of sector size + * (which is common practice). + *----------------------------------------------------------------------*/ +#define CFG_ENV_IS_IN_FLASH 1 /* Environment in flash */ +#define CFG_ENV_SIZE (64 * 1024) /* 64 KByte (1 sector) */ +#define CONFIG_ENV_OVERWRITE /* Serial change Ok */ +#define CFG_ENV_ADDR (CFG_RESET_ADDR + CFG_MONITOR_LEN) + +/*------------------------------------------------------------------------ + * CONSOLE + *----------------------------------------------------------------------*/ +#if defined(CONFIG_CONSOLE_JTAG) +#define CFG_NIOS_CONSOLE 0x021208b0 /* JTAG UART base addr */ +#else +#define CFG_NIOS_CONSOLE 0x02120840 /* UART base addr */ +#endif + +#define CFG_NIOS_FIXEDBAUD 1 /* Baudrate is fixed */ +#define CONFIG_BAUDRATE 115200 /* Initial baudrate */ +#define CFG_BAUDRATE_TABLE {115200} /* It's fixed ;-) */ + +#define CFG_CONSOLE_INFO_QUIET 1 /* Suppress console info*/ + +/*------------------------------------------------------------------------ + * EPCS Device -- wne CFG_NIOS_EPCSBASE is defined code/commands for + * epcs device access is enabled. The base address is the epcs + * _register_ base address, NOT THE ADDRESS OF THE MEMORY BLOCK. + * The register base is currently at offset 0x600 from the memory base. + *----------------------------------------------------------------------*/ +#define CFG_NIOS_EPCSBASE 0x02100200 /* EPCS register base */ + +/*------------------------------------------------------------------------ + * DEBUG + *----------------------------------------------------------------------*/ +#undef CONFIG_ROM_STUBS /* Stubs not in ROM */ + +/*------------------------------------------------------------------------ + * TIMEBASE -- + * + * The high res timer defaults to 1 msec. Since it includes the period + * registers, we can slow it down to 10 msec using TMRCNT. If the default + * period is acceptable, TMRCNT can be left undefined. + *----------------------------------------------------------------------*/ +#define CFG_NIOS_TMRBASE 0x02120820 /* Tick timer base addr */ +#define CFG_NIOS_TMRIRQ 3 /* Timer IRQ num */ +#define CFG_NIOS_TMRMS 10 /* 10 msec per tick */ +#define CFG_NIOS_TMRCNT (CFG_NIOS_TMRMS * (CONFIG_SYS_CLK_FREQ/1000)) +#define CFG_HZ (CONFIG_SYS_CLK_FREQ/(CFG_NIOS_TMRCNT + 1)) + +/*------------------------------------------------------------------------ + * STATUS LED -- Provides a simple blinking led. For Nios2 each board + * must implement its own led routines -- leds are, after all, + * board-specific, no? + *----------------------------------------------------------------------*/ +#define CFG_LEDPIO_ADDR 0x02120870 /* LED PIO base addr */ +#define CONFIG_STATUS_LED /* Enable status driver */ + +#define STATUS_LED_BIT 1 /* Bit-0 on PIO */ +#define STATUS_LED_STATE 1 /* Blinking */ +#define STATUS_LED_PERIOD (500/CFG_NIOS_TMRMS) /* Every 500 msec */ + +/*------------------------------------------------------------------------ + * ETHERNET -- The header file for the SMC91111 driver hurts my eyes ... + * and really doesn't need any additional clutter. So I choose the lazy + * way out to avoid changes there -- define the base address to ensure + * cache bypass so there's no need to monkey with inx/outx macros. + *----------------------------------------------------------------------*/ +#define CONFIG_SMC91111_BASE 0x82110300 /* Base addr (bypass) */ +#define CONFIG_DRIVER_SMC91111 /* Using SMC91c111 */ +#undef CONFIG_SMC91111_EXT_PHY /* Internal PHY */ +#define CONFIG_SMC_USE_32_BIT /* 32-bit interface */ + +#define CONFIG_ETHADDR 08:00:3e:26:0a:5b +#define CONFIG_NETMASK 255.255.255.0 +#define CONFIG_IPADDR 192.168.2.21 +#define CONFIG_SERVERIP 192.168.2.16 + +/*------------------------------------------------------------------------ + * COMMANDS + *----------------------------------------------------------------------*/ +#define CONFIG_COMMANDS (CFG_CMD_BDI | \ + CFG_CMD_DHCP | \ + CFG_CMD_ECHO | \ + CFG_CMD_ENV | \ + CFG_CMD_FLASH | \ + CFG_CMD_IMI | \ + CFG_CMD_IRQ | \ + CFG_CMD_LOADS | \ + CFG_CMD_LOADB | \ + CFG_CMD_MEMORY | \ + CFG_CMD_MISC | \ + CFG_CMD_NET | \ + CFG_CMD_PING | \ + CFG_CMD_RUN | \ + CFG_CMD_SAVES ) +#include <cmd_confdefs.h> + +/*------------------------------------------------------------------------ + * MISC + *----------------------------------------------------------------------*/ +#define CFG_LONGHELP /* Provide extended help*/ +#define CFG_PROMPT "==> " /* Command prompt */ +#define CFG_CBSIZE 256 /* Console I/O buf size */ +#define CFG_MAXARGS 16 /* Max command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot arg buf size */ +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print buf size */ +#define CFG_LOAD_ADDR CFG_SDRAM_BASE /* Default load address */ +#define CFG_MEMTEST_START CFG_SDRAM_BASE /* Start addr for test */ +#define CFG_MEMTEST_END CFG_INIT_SP - 0x00020000 + +#define CFG_HUSH_PARSER +#define CFG_PROMPT_HUSH_PS2 "> " + +#endif /* __CONFIG_H */ diff --git a/include/configs/EP1S10.h b/include/configs/EP1S10.h new file mode 100644 index 0000000000..6eca9f23dc --- /dev/null +++ b/include/configs/EP1S10.h @@ -0,0 +1,193 @@ +/* + * (C) Copyright 2005, Psyent Corporation <www.psyent.com> + * Scott McNutt <smcnutt@psyent.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/*------------------------------------------------------------------------ + * BOARD/CPU + *----------------------------------------------------------------------*/ +#define CONFIG_EP1S10 1 /* EP1S10 board */ +#define CONFIG_SYS_CLK_FREQ 50000000 /* 50 MHz core clk */ + +#define CFG_RESET_ADDR 0x00000000 /* Hard-reset address */ +#define CFG_EXCEPTION_ADDR 0x01000020 /* Exception entry point*/ +#define CFG_NIOS_SYSID_BASE 0x021208b8 /* System id address */ + +/*------------------------------------------------------------------------ + * CACHE -- the following will support II/s and II/f. The II/s does not + * have dcache, so the cache instructions will behave as NOPs. + *----------------------------------------------------------------------*/ +#define CFG_ICACHE_SIZE 4096 /* 4 KByte total */ +#define CFG_ICACHELINE_SIZE 32 /* 32 bytes/line */ +#define CFG_DCACHE_SIZE 2048 /* 2 KByte (II/f) */ +#define CFG_DCACHELINE_SIZE 4 /* 4 bytes/line (II/f) */ + +/*------------------------------------------------------------------------ + * MEMORY BASE ADDRESSES + *----------------------------------------------------------------------*/ +#define CFG_FLASH_BASE 0x00000000 /* FLASH base addr */ +#define CFG_FLASH_SIZE 0x00800000 /* 8 MByte */ +#define CFG_SDRAM_BASE 0x01000000 /* SDRAM base addr */ +#define CFG_SDRAM_SIZE 0x01000000 /* 16 MByte */ +#define CFG_SRAM_BASE 0x02000000 /* SRAM base addr */ +#define CFG_SRAM_SIZE 0x00100000 /* 1 MB */ + +/*------------------------------------------------------------------------ + * MEMORY ORGANIZATION + * -Monitor at top. + * -The heap is placed below the monitor. + * -Global data is placed below the heap. + * -The stack is placed below global data (&grows down). + *----------------------------------------------------------------------*/ +#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256k */ +#define CFG_GBL_DATA_SIZE 128 /* Global data size rsvd*/ +#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 256*1024) /* 256k heap */ + +#define CFG_MONITOR_BASE TEXT_BASE +#define CFG_MALLOC_BASE (CFG_MONITOR_BASE - CFG_MALLOC_LEN) +#define CFG_GBL_DATA_OFFSET (CFG_MALLOC_BASE - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP CFG_GBL_DATA_OFFSET + +/*------------------------------------------------------------------------ + * FLASH (AM29LV065D) + *----------------------------------------------------------------------*/ +#define CFG_MAX_FLASH_SECT 128 /* Max # sects per bank */ +#define CFG_MAX_FLASH_BANKS 1 /* Max # of flash banks */ +#define CFG_FLASH_ERASE_TOUT 8000 /* Erase timeout (msec) */ +#define CFG_FLASH_WRITE_TOUT 100 /* Write timeout (msec) */ + +/*------------------------------------------------------------------------ + * ENVIRONMENT -- Put environment in sector CFG_MONITOR_LEN above + * CFG_FLASH_BASE, since we assume that u-boot is stored at the bottom + * of flash memory. This will keep the environment in user region + * of flash. NOTE: the monitor length must be multiple of sector size + * (which is common practice). + *----------------------------------------------------------------------*/ +#define CFG_ENV_IS_IN_FLASH 1 /* Environment in flash */ +#define CFG_ENV_SIZE (64 * 1024) /* 64 KByte (1 sector) */ +#define CONFIG_ENV_OVERWRITE /* Serial change Ok */ +#define CFG_ENV_ADDR (CFG_FLASH_BASE + CFG_MONITOR_LEN) + +/*------------------------------------------------------------------------ + * CONSOLE + *----------------------------------------------------------------------*/ +#if defined(CONFIG_CONSOLE_JTAG) +#define CFG_NIOS_CONSOLE 0x021208b0 /* JTAG UART base addr */ +#else +#define CFG_NIOS_CONSOLE 0x02120840 /* UART base addr */ +#endif + +#define CFG_NIOS_FIXEDBAUD 1 /* Baudrate is fixed */ +#define CONFIG_BAUDRATE 115200 /* Initial baudrate */ +#define CFG_BAUDRATE_TABLE {115200} /* It's fixed ;-) */ + +#define CFG_CONSOLE_INFO_QUIET 1 /* Suppress console info*/ + +/*------------------------------------------------------------------------ + * EPCS Device -- None for stratix. + *----------------------------------------------------------------------*/ +#undef CFG_NIOS_EPCSBASE + +/*------------------------------------------------------------------------ + * DEBUG + *----------------------------------------------------------------------*/ +#undef CONFIG_ROM_STUBS /* Stubs not in ROM */ + +/*------------------------------------------------------------------------ + * TIMEBASE -- + * + * The high res timer defaults to 1 msec. Since it includes the period + * registers, we can slow it down to 10 msec using TMRCNT. If the default + * period is acceptable, TMRCNT can be left undefined. + *----------------------------------------------------------------------*/ +#define CFG_NIOS_TMRBASE 0x02120820 /* Tick timer base addr */ +#define CFG_NIOS_TMRIRQ 3 /* Timer IRQ num */ +#define CFG_NIOS_TMRMS 10 /* 10 msec per tick */ +#define CFG_NIOS_TMRCNT (CFG_NIOS_TMRMS * (CONFIG_SYS_CLK_FREQ/1000)) +#define CFG_HZ (CONFIG_SYS_CLK_FREQ/(CFG_NIOS_TMRCNT + 1)) + +/*------------------------------------------------------------------------ + * STATUS LED -- Provides a simple blinking led. For Nios2 each board + * must implement its own led routines -- since leds are board-specific. + *----------------------------------------------------------------------*/ +#define CFG_LEDPIO_ADDR 0x02120870 /* LED PIO base addr */ +#define CONFIG_STATUS_LED /* Enable status driver */ + +#define STATUS_LED_BIT 1 /* Bit-0 on PIO */ +#define STATUS_LED_STATE 1 /* Blinking */ +#define STATUS_LED_PERIOD (500/CFG_NIOS_TMRMS) /* Every 500 msec */ + +/*------------------------------------------------------------------------ + * ETHERNET -- The header file for the SMC91111 driver hurts my eyes ... + * and really doesn't need any additional clutter. So I choose the lazy + * way out to avoid changes there -- define the base address to ensure + * cache bypass so there's no need to monkey with inx/outx macros. + *----------------------------------------------------------------------*/ +#define CONFIG_SMC91111_BASE 0x82110300 /* Base addr (bypass) */ +#define CONFIG_DRIVER_SMC91111 /* Using SMC91c111 */ +#undef CONFIG_SMC91111_EXT_PHY /* Internal PHY */ +#define CONFIG_SMC_USE_32_BIT /* 32-bit interface */ + +#define CONFIG_ETHADDR 08:00:3e:26:0a:5b +#define CONFIG_NETMASK 255.255.255.0 +#define CONFIG_IPADDR 192.168.2.21 +#define CONFIG_SERVERIP 192.168.2.16 + +/*------------------------------------------------------------------------ + * COMMANDS + *----------------------------------------------------------------------*/ +#define CONFIG_COMMANDS (CFG_CMD_BDI | \ + CFG_CMD_DHCP | \ + CFG_CMD_ECHO | \ + CFG_CMD_ENV | \ + CFG_CMD_FLASH | \ + CFG_CMD_IMI | \ + CFG_CMD_IRQ | \ + CFG_CMD_LOADS | \ + CFG_CMD_LOADB | \ + CFG_CMD_MEMORY | \ + CFG_CMD_MISC | \ + CFG_CMD_NET | \ + CFG_CMD_PING | \ + CFG_CMD_RUN | \ + CFG_CMD_SAVES ) +#include <cmd_confdefs.h> + +/*------------------------------------------------------------------------ + * MISC + *----------------------------------------------------------------------*/ +#define CFG_LONGHELP /* Provide extended help*/ +#define CFG_PROMPT "==> " /* Command prompt */ +#define CFG_CBSIZE 256 /* Console I/O buf size */ +#define CFG_MAXARGS 16 /* Max command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot arg buf size */ +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print buf size */ +#define CFG_LOAD_ADDR CFG_SDRAM_BASE /* Default load address */ +#define CFG_MEMTEST_START CFG_SDRAM_BASE /* Start addr for test */ +#define CFG_MEMTEST_END CFG_INIT_SP - 0x00020000 + +#define CFG_HUSH_PARSER +#define CFG_PROMPT_HUSH_PS2 "> " + +#endif /* __CONFIG_H */ diff --git a/include/configs/EP1S40.h b/include/configs/EP1S40.h new file mode 100644 index 0000000000..976e79acb6 --- /dev/null +++ b/include/configs/EP1S40.h @@ -0,0 +1,193 @@ +/* + * (C) Copyright 2005, Psyent Corporation <www.psyent.com> + * Scott McNutt <smcnutt@psyent.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/*------------------------------------------------------------------------ + * BOARD/CPU + *----------------------------------------------------------------------*/ +#define CONFIG_EP1S40 1 /* EP1S40 board */ +#define CONFIG_SYS_CLK_FREQ 50000000 /* 50 MHz core clk */ + +#define CFG_RESET_ADDR 0x00000000 /* Hard-reset address */ +#define CFG_EXCEPTION_ADDR 0x01000020 /* Exception entry point*/ +#define CFG_NIOS_SYSID_BASE 0x021208b8 /* System id address */ + +/*------------------------------------------------------------------------ + * CACHE -- the following will support II/s and II/f. The II/s does not + * have dcache, so the cache instructions will behave as NOPs. + *----------------------------------------------------------------------*/ +#define CFG_ICACHE_SIZE 4096 /* 4 KByte total */ +#define CFG_ICACHELINE_SIZE 32 /* 32 bytes/line */ +#define CFG_DCACHE_SIZE 2048 /* 2 KByte (II/f) */ +#define CFG_DCACHELINE_SIZE 4 /* 4 bytes/line (II/f) */ + +/*------------------------------------------------------------------------ + * MEMORY BASE ADDRESSES + *----------------------------------------------------------------------*/ +#define CFG_FLASH_BASE 0x00000000 /* FLASH base addr */ +#define CFG_FLASH_SIZE 0x00800000 /* 8 MByte */ +#define CFG_SDRAM_BASE 0x01000000 /* SDRAM base addr */ +#define CFG_SDRAM_SIZE 0x01000000 /* 16 MByte */ +#define CFG_SRAM_BASE 0x02000000 /* SRAM base addr */ +#define CFG_SRAM_SIZE 0x00100000 /* 1 MB */ + +/*------------------------------------------------------------------------ + * MEMORY ORGANIZATION + * -Monitor at top. + * -The heap is placed below the monitor. + * -Global data is placed below the heap. + * -The stack is placed below global data (&grows down). + *----------------------------------------------------------------------*/ +#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256k */ +#define CFG_GBL_DATA_SIZE 128 /* Global data size rsvd*/ +#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 256*1024) /* 256k heap */ + +#define CFG_MONITOR_BASE TEXT_BASE +#define CFG_MALLOC_BASE (CFG_MONITOR_BASE - CFG_MALLOC_LEN) +#define CFG_GBL_DATA_OFFSET (CFG_MALLOC_BASE - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP CFG_GBL_DATA_OFFSET + +/*------------------------------------------------------------------------ + * FLASH (AM29LV065D) + *----------------------------------------------------------------------*/ +#define CFG_MAX_FLASH_SECT 128 /* Max # sects per bank */ +#define CFG_MAX_FLASH_BANKS 1 /* Max # of flash banks */ +#define CFG_FLASH_ERASE_TOUT 8000 /* Erase timeout (msec) */ +#define CFG_FLASH_WRITE_TOUT 100 /* Write timeout (msec) */ + +/*------------------------------------------------------------------------ + * ENVIRONMENT -- Put environment in sector CFG_MONITOR_LEN above + * CFG_FLASH_BASE, since we assume that u-boot is stored at the bottom + * of flash memory. This will keep the environment in user region + * of flash. NOTE: the monitor length must be multiple of sector size + * (which is common practice). + *----------------------------------------------------------------------*/ +#define CFG_ENV_IS_IN_FLASH 1 /* Environment in flash */ +#define CFG_ENV_SIZE (64 * 1024) /* 64 KByte (1 sector) */ +#define CONFIG_ENV_OVERWRITE /* Serial change Ok */ +#define CFG_ENV_ADDR (CFG_FLASH_BASE + CFG_MONITOR_LEN) + +/*------------------------------------------------------------------------ + * CONSOLE + *----------------------------------------------------------------------*/ +#if defined(CONFIG_CONSOLE_JTAG) +#define CFG_NIOS_CONSOLE 0x021208b0 /* JTAG UART base addr */ +#else +#define CFG_NIOS_CONSOLE 0x02120840 /* UART base addr */ +#endif + +#define CFG_NIOS_FIXEDBAUD 1 /* Baudrate is fixed */ +#define CONFIG_BAUDRATE 115200 /* Initial baudrate */ +#define CFG_BAUDRATE_TABLE {115200} /* It's fixed ;-) */ + +#define CFG_CONSOLE_INFO_QUIET 1 /* Suppress console info*/ + +/*------------------------------------------------------------------------ + * EPCS Device -- None for stratix. + *----------------------------------------------------------------------*/ +#undef CFG_NIOS_EPCSBASE + +/*------------------------------------------------------------------------ + * DEBUG + *----------------------------------------------------------------------*/ +#undef CONFIG_ROM_STUBS /* Stubs not in ROM */ + +/*------------------------------------------------------------------------ + * TIMEBASE -- + * + * The high res timer defaults to 1 msec. Since it includes the period + * registers, we can slow it down to 10 msec using TMRCNT. If the default + * period is acceptable, TMRCNT can be left undefined. + *----------------------------------------------------------------------*/ +#define CFG_NIOS_TMRBASE 0x02120820 /* Tick timer base addr */ +#define CFG_NIOS_TMRIRQ 3 /* Timer IRQ num */ +#define CFG_NIOS_TMRMS 10 /* 10 msec per tick */ +#define CFG_NIOS_TMRCNT (CFG_NIOS_TMRMS * (CONFIG_SYS_CLK_FREQ/1000)) +#define CFG_HZ (CONFIG_SYS_CLK_FREQ/(CFG_NIOS_TMRCNT + 1)) + +/*------------------------------------------------------------------------ + * STATUS LED -- Provides a simple blinking led. For Nios2 each board + * must implement its own led routines -- since leds are board-specific. + *----------------------------------------------------------------------*/ +#define CFG_LEDPIO_ADDR 0x02120870 /* LED PIO base addr */ +#define CONFIG_STATUS_LED /* Enable status driver */ + +#define STATUS_LED_BIT 1 /* Bit-0 on PIO */ +#define STATUS_LED_STATE 1 /* Blinking */ +#define STATUS_LED_PERIOD (500/CFG_NIOS_TMRMS) /* Every 500 msec */ + +/*------------------------------------------------------------------------ + * ETHERNET -- The header file for the SMC91111 driver hurts my eyes ... + * and really doesn't need any additional clutter. So I choose the lazy + * way out to avoid changes there -- define the base address to ensure + * cache bypass so there's no need to monkey with inx/outx macros. + *----------------------------------------------------------------------*/ +#define CONFIG_SMC91111_BASE 0x82110300 /* Base addr (bypass) */ +#define CONFIG_DRIVER_SMC91111 /* Using SMC91c111 */ +#undef CONFIG_SMC91111_EXT_PHY /* Internal PHY */ +#define CONFIG_SMC_USE_32_BIT /* 32-bit interface */ + +#define CONFIG_ETHADDR 08:00:3e:26:0a:5b +#define CONFIG_NETMASK 255.255.255.0 +#define CONFIG_IPADDR 192.168.2.21 +#define CONFIG_SERVERIP 192.168.2.16 + +/*------------------------------------------------------------------------ + * COMMANDS + *----------------------------------------------------------------------*/ +#define CONFIG_COMMANDS (CFG_CMD_BDI | \ + CFG_CMD_DHCP | \ + CFG_CMD_ECHO | \ + CFG_CMD_ENV | \ + CFG_CMD_FLASH | \ + CFG_CMD_IMI | \ + CFG_CMD_IRQ | \ + CFG_CMD_LOADS | \ + CFG_CMD_LOADB | \ + CFG_CMD_MEMORY | \ + CFG_CMD_MISC | \ + CFG_CMD_NET | \ + CFG_CMD_PING | \ + CFG_CMD_RUN | \ + CFG_CMD_SAVES ) +#include <cmd_confdefs.h> + +/*------------------------------------------------------------------------ + * MISC + *----------------------------------------------------------------------*/ +#define CFG_LONGHELP /* Provide extended help*/ +#define CFG_PROMPT "==> " /* Command prompt */ +#define CFG_CBSIZE 256 /* Console I/O buf size */ +#define CFG_MAXARGS 16 /* Max command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot arg buf size */ +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print buf size */ +#define CFG_LOAD_ADDR CFG_SDRAM_BASE /* Default load address */ +#define CFG_MEMTEST_START CFG_SDRAM_BASE /* Start addr for test */ +#define CFG_MEMTEST_END CFG_INIT_SP - 0x00020000 + +#define CFG_HUSH_PARSER +#define CFG_PROMPT_HUSH_PS2 "> " + +#endif /* __CONFIG_H */ diff --git a/include/configs/EP88x.h b/include/configs/EP88x.h new file mode 100644 index 0000000000..738763b86f --- /dev/null +++ b/include/configs/EP88x.h @@ -0,0 +1,205 @@ +/* + * Copyright (C) 2005 Arabella Software Ltd. + * Yuli Barcohen <yuli@arabellasw.com> + * + * Support for Embedded Planet EP88x boards. + * Tested on EP88xC with MPC885 CPU, 64MB SDRAM and 16MB flash. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef __CONFIG_H +#define __CONFIG_H + +#define CONFIG_MPC885 + +#define CONFIG_EP88X /* Embedded Planet EP88x board */ + +#define CONFIG_BOARD_EARLY_INIT_F /* Call board_early_init_f */ + +/* Allow serial number (serial#) and MAC address (ethaddr) to be overwritten */ +#define CONFIG_ENV_OVERWRITE + +#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */ +#define CONFIG_BAUDRATE 38400 + +#define CONFIG_ETHER_ON_FEC1 /* Enable Ethernet on FEC1 */ +#define CONFIG_ETHER_ON_FEC2 /* Enable Ethernet on FEC2 */ +#if defined(CONFIG_ETHER_ON_FEC1) || defined(CONFIG_ETHER_ON_FEC2) +#define CFG_DISCOVER_PHY +#define FEC_ENET +#endif /* CONFIG_FEC_ENET */ + +#define CONFIG_8xx_OSCLK 10000000 /* 10 MHz oscillator on EXTCLK */ +#define CONFIG_8xx_CPUCLK_DEFAULT 100000000 +#define CFG_8xx_CPUCLK_MIN 40000000 +#define CFG_8xx_CPUCLK_MAX 133000000 + +#define CONFIG_COMMANDS (CONFIG_CMD_DFL \ + | CFG_CMD_DHCP \ + | CFG_CMD_IMMAP \ + | CFG_CMD_MII \ + | CFG_CMD_PING \ + ) + +/* This must be included AFTER the definition of CONFIG_COMMANDS */ +#include <cmd_confdefs.h> + +#define CONFIG_BOOTDELAY 5 /* Autoboot after 5 seconds */ +#define CONFIG_BOOTCOMMAND "bootm fe060000" /* Autoboot command */ +#define CONFIG_BOOTARGS "root=/dev/mtdblock1 rw mtdparts=phys:2M(ROM)ro,-(root)" + +#define CONFIG_BZIP2 /* Include support for bzip2 compressed images */ +#undef CONFIG_WATCHDOG /* Disable platform specific watchdog */ + +/*----------------------------------------------------------------------- + * Miscellaneous configurable options + */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#define CFG_HUSH_PARSER +#define CFG_PROMPT_HUSH_PS2 "> " +#define CFG_LONGHELP /* #undef to save memory */ +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* Max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_LOAD_ADDR 0x400000 /* Default load address */ + +#define CFG_HZ 1000 /* Decrementer freq: 1 ms ticks */ + +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +/*----------------------------------------------------------------------- + * RAM configuration (note that CFG_SDRAM_BASE must be zero) + */ +#define CFG_SDRAM_BASE 0x00000000 +#define CFG_SDRAM_MAX_SIZE 0x08000000 /* Up to 128 Mbyte */ + +#define CFG_MAMR 0x00805000 + +/* + * 4096 Up to 4096 SDRAM rows + * 1000 factor s -> ms + * 32 PTP (pre-divider from MPTPR) + * 4 Number of refresh cycles per period + * 64 Refresh cycle in ms per number of rows + */ +#define CFG_PTA_PER_CLK ((4096 * 32 * 1000) / (4 * 64)) + +#define CFG_MEMTEST_START 0x00100000 /* memtest works on */ +#define CFG_MEMTEST_END 0x00500000 /* 1 ... 5 MB in SDRAM */ + +#define CFG_RESET_ADDRESS 0x09900000 + +/*----------------------------------------------------------------------- + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ + +#define CFG_MONITOR_BASE TEXT_BASE +#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 KB for Monitor */ +#ifdef CONFIG_BZIP2 +#define CFG_MALLOC_LEN (4096 << 10) /* Reserve ~4 MB for malloc() */ +#else +#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 KB for malloc() */ +#endif /* CONFIG_BZIP2 */ + +/*----------------------------------------------------------------------- + * Flash organisation + */ +#define CFG_FLASH_BASE 0xFC000000 +#define CFG_FLASH_CFI /* The flash is CFI compatible */ +#define CFG_FLASH_CFI_DRIVER /* Use common CFI driver */ +#define CFG_MAX_FLASH_BANKS 1 /* Max number of flash banks */ +#define CFG_MAX_FLASH_SECT 512 /* Max num of sects on one chip */ + +/* Environment is in flash */ +#define CFG_ENV_IS_IN_FLASH +#define CFG_ENV_SECT_SIZE 0x20000 /* We use one complete sector */ +#define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN) + +#define CFG_OR0_PRELIM 0xFC000160 +#define CFG_BR0_PRELIM (CFG_FLASH_BASE | BR_PS_32 | BR_MS_GPCM | BR_V) + +#define CFG_DIRECT_FLASH_TFTP + +/*----------------------------------------------------------------------- + * BCSR + */ +#define CFG_OR3_PRELIM 0xFF0005B0 +#define CFG_BR3_PRELIM (0xFA000000 |BR_PS_16 | BR_MS_GPCM | BR_V) + +#define CFG_BCSR 0xFA400000 + +/*----------------------------------------------------------------------- + * Internal Memory Map Register + */ +#define CFG_IMMR 0xF0000000 + +/*----------------------------------------------------------------------- + * Definitions for initial stack pointer and data area (in DPRAM) + */ +#define CFG_INIT_RAM_ADDR CFG_IMMR +#define CFG_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */ +#define CFG_GBL_DATA_SIZE 128 /* Size in bytes reserved for initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET + +/*----------------------------------------------------------------------- + * Configuration registers + */ +#ifdef CONFIG_WATCHDOG +#define CFG_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | \ + SYPCR_SWF | SYPCR_SWE | SYPCR_SWRI | \ + SYPCR_SWP) +#else +#define CFG_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | \ + SYPCR_SWF | SYPCR_SWP) +#endif /* CONFIG_WATCHDOG */ + +#define CFG_SIUMCR (SIUMCR_MLRC01 | SIUMCR_DBGC11) + +/* TBSCR - Time Base Status and Control Register */ +#define CFG_TBSCR (TBSCR_TBF | TBSCR_TBE) + +/* PISCR - Periodic Interrupt Status and Control */ +#define CFG_PISCR PISCR_PS + +/* SCCR - System Clock and reset Control Register */ +#define SCCR_MASK SCCR_EBDF11 +#define CFG_SCCR SCCR_RTSEL + +#define CFG_DER 0 + +/*----------------------------------------------------------------------- + * Cache Configuration + */ +#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx chips */ + +/*----------------------------------------------------------------------- + * Internal Definitions + * + * Boot Flags + */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from flash */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +#endif /* __CONFIG_H */ diff --git a/include/configs/GEN860T.h b/include/configs/GEN860T.h index de8f7ae711..6613f90a77 100644 --- a/include/configs/GEN860T.h +++ b/include/configs/GEN860T.h @@ -284,6 +284,8 @@ */ #include <cmd_confdefs.h> +#define CFG_NAND_LEGACY + /* * Verbose help from command monitor. */ diff --git a/include/configs/HH405.h b/include/configs/HH405.h index 131c21555d..dc40ebc861 100644 --- a/include/configs/HH405.h +++ b/include/configs/HH405.h @@ -5,6 +5,9 @@ * (C) Copyright 2005 * Stefan Roese, DENX Software Engineering, sr@denx.de. * + * (C) Copyright 2006 + * Matthias Fuchs, esd GmbH, matthias.fuchs@esd-electronics.com + * * See file CREDITS for list of people who contributed to this * project. * @@ -61,9 +64,13 @@ #define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ +#define CONFIG_NET_MULTI 1 +#undef CONFIG_HAS_ETH1 + #define CONFIG_MII 1 /* MII PHY management */ -#define CONFIG_PHY_ADDR 0 /* PHY address */ +#define CONFIG_PHY_ADDR 0 /* PHY address */ #define CONFIG_LXT971_NO_SLEEP 1 /* disable sleep mode in LXT971 */ +#define CONFIG_RESET_PHY_R 1 /* use reset_phy() to disable phy sleep mode */ #define CONFIG_PHY_CLK_FREQ EMAC_STACR_CLK_66MHZ /* 66 MHz OPB clock*/ @@ -79,6 +86,7 @@ #else #define CONFIG_VIDEO_SM501_16BPP #endif +#define CONFIG_VIDEO_SM501_FBMEM_OFFSET 0x10000 #define CONFIG_CFB_CONSOLE #define CONFIG_VIDEO_LOGO #define CONFIG_VGA_AS_SINGLE_DEVICE @@ -122,6 +130,8 @@ /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ #include <cmd_confdefs.h> +#define CFG_NAND_LEGACY + #undef CONFIG_BZIP2 /* include support for bzip2 compressed images */ #undef CONFIG_WATCHDOG /* watchdog disabled */ @@ -434,9 +444,12 @@ #define CFG_FPGA_CTRL_VGA0_BL_MODE 0x0008 #define CFG_FPGA_CTRL_CF_RESET 0x0040 #define CFG_FPGA_CTRL_PS2_PWR 0x0080 -#define CFG_FPGA_CTRL_CF_PWR 0x0100 /* low active */ +#define CFG_FPGA_CTRL_CF_PWRN 0x0100 /* low active */ #define CFG_FPGA_CTRL_CF_BUS_EN 0x0200 #define CFG_FPGA_CTRL_LCD_CLK 0x7000 /* Mask for lcd clock */ +#define CFG_FPGA_CTRL_OW_ENABLE 0x8000 + +#define CFG_FPGA_STATUS_CF_DETECT 0x8000 #define LCD_CLK_OFF 0x0000 /* Off */ #define LCD_CLK_02083 0x1000 /* 2.083 MHz */ diff --git a/include/configs/HUB405.h b/include/configs/HUB405.h index eb627e881d..f84e356216 100644 --- a/include/configs/HUB405.h +++ b/include/configs/HUB405.h @@ -135,6 +135,8 @@ * NAND-FLASH stuff *----------------------------------------------------------------------- */ +#define CFG_NAND_LEGACY + #define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ #define SECTORSIZE 512 diff --git a/include/configs/IDS8247.h b/include/configs/IDS8247.h index aaa44c5398..29eb874dbf 100644 --- a/include/configs/IDS8247.h +++ b/include/configs/IDS8247.h @@ -236,6 +236,7 @@ */ #if (CONFIG_COMMANDS & CFG_CMD_NAND) +#define CFG_NAND_LEGACY #define CFG_NAND0_BASE 0xE1000000 #define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ diff --git a/include/configs/ISPAN.h b/include/configs/ISPAN.h index 65056a21ee..706bdb94f5 100644 --- a/include/configs/ISPAN.h +++ b/include/configs/ISPAN.h @@ -109,7 +109,6 @@ #define CONFIG_COMMANDS ( CONFIG_CMD_DFL \ | CFG_CMD_ASKENV \ | CFG_CMD_DHCP \ - | CFG_CMD_ECHO \ | CFG_CMD_IMMAP \ | CFG_CMD_MII \ | CFG_CMD_PING \ diff --git a/include/configs/IceCube.h b/include/configs/IceCube.h index afba5c625e..1152f838d9 100644 --- a/include/configs/IceCube.h +++ b/include/configs/IceCube.h @@ -56,7 +56,9 @@ * 0x40000000 - 0x4fffffff - PCI Memory * 0x50000000 - 0x50ffffff - PCI IO Space */ -#define CONFIG_PCI 1 +#define CONFIG_PCI + +#if defined(CONFIG_PCI) #define CONFIG_PCI_PNP 1 #define CONFIG_PCI_SCAN_SHOW 1 @@ -67,6 +69,8 @@ #define CONFIG_PCI_IO_BUS 0x50000000 #define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS #define CONFIG_PCI_IO_SIZE 0x01000000 +#define ADD_PCI_CMD CFG_CMD_PCI +#endif #define CFG_XLB_PIPELINING 1 @@ -76,8 +80,6 @@ #define CFG_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */ #define CONFIG_NS8382X 1 -#define ADD_PCI_CMD CFG_CMD_PCI - #else /* MPC5100 */ #define CONFIG_MII 1 @@ -122,9 +124,13 @@ # define CFG_LOWBOOT16 1 #endif #if (TEXT_BASE == 0xFF800000) /* Boot low with 8 MB Flash */ +#if defined(CONFIG_LITE5200B) +# error CFG_LOWBOOT08 is incompatible with the Lite5200B +#else # define CFG_LOWBOOT 1 # define CFG_LOWBOOT08 1 #endif +#endif /* * Autobooting @@ -160,8 +166,12 @@ /* * IPB Bus clocking configuration. */ -#undef CFG_IPBSPEED_133 /* define for 133MHz speed */ +#if defined(CONFIG_LITE5200B) +#define CFG_IPBSPEED_133 /* define for 133MHz speed */ +#else +#undef CFG_IPBSPEED_133 /* define for 133MHz speed */ #endif +#endif /* CONFIG_MPC5200 */ /* * I2C configuration */ @@ -182,6 +192,20 @@ /* * Flash configuration */ +#if defined(CONFIG_LITE5200B) +#define CFG_FLASH_BASE 0xFE000000 +#define CFG_FLASH_SIZE 0x01000000 +#if !defined(CFG_LOWBOOT) +#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x01760000 + 0x00800000) +#else /* CFG_LOWBOOT */ +#if defined(CFG_LOWBOOT08) +# error CFG_LOWBOOT08 is incompatible with the Lite5200B +#endif +#if defined(CFG_LOWBOOT16) +#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x01060000) +#endif +#endif /* CFG_LOWBOOT */ +#else /* !CONFIG_LITE5200B (IceCube)*/ #define CFG_FLASH_BASE 0xFF000000 #define CFG_FLASH_SIZE 0x01000000 #if !defined(CFG_LOWBOOT) @@ -194,6 +218,7 @@ #define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x00040000) #endif #endif /* CFG_LOWBOOT */ +#endif /* CONFIG_LITE5200B */ #define CFG_MAX_FLASH_BANKS 2 /* max num of memory banks */ #define CFG_MAX_FLASH_SECT 128 /* max num of sects on one chip */ @@ -203,13 +228,23 @@ #undef CONFIG_FLASH_16BIT /* Flash is 8-bit */ +#if defined(CONFIG_LITE5200B) +#define CFG_FLASH_CFI_DRIVER +#define CFG_FLASH_CFI +#define CFG_FLASH_BANKS_LIST {CFG_CS1_START,CFG_CS0_START} +#endif + /* * Environment settings */ #define CFG_ENV_IS_IN_FLASH 1 #define CFG_ENV_SIZE 0x10000 +#if defined(CONFIG_LITE5200B) +#define CFG_ENV_SECT_SIZE 0x20000 +#else #define CFG_ENV_SECT_SIZE 0x10000 +#endif #define CONFIG_ENV_OVERWRITE 1 /* @@ -246,6 +281,9 @@ */ /* #define CONFIG_FEC_10MBIT 1 */ #define CONFIG_PHY_ADDR 0x00 +#if defined(CONFIG_LITE5200B) +#define CONFIG_FEC_MII100 1 +#endif /* * GPIO configuration @@ -288,6 +326,16 @@ #define CFG_HID0_FINAL 0 #endif +#if defined(CONFIG_LITE5200B) +#define CFG_CS1_START CFG_FLASH_BASE +#define CFG_CS1_SIZE CFG_FLASH_SIZE +#define CFG_CS1_CFG 0x00047800 +#define CFG_CS0_START (CFG_FLASH_BASE + CFG_FLASH_SIZE) +#define CFG_CS0_SIZE CFG_FLASH_SIZE +#define CFG_BOOTCS_START CFG_CS0_START +#define CFG_BOOTCS_SIZE CFG_FLASH_SIZE +#define CFG_BOOTCS_CFG 0x00047800 +#else /* IceCube aka Lite5200 */ #ifdef CONFIG_MPC5200_DDR #define CFG_BOOTCS_START (CFG_CS1_START + CFG_CS1_SIZE) @@ -306,6 +354,7 @@ #define CFG_CS0_SIZE CFG_FLASH_SIZE #endif /* CONFIG_MPC5200_DDR */ +#endif /*CONFIG_LITE5200B */ #define CFG_CS_BURST 0x00000000 #define CFG_CS_DEADCYCLE 0x33333333 diff --git a/include/configs/M5271EVB.h b/include/configs/M5271EVB.h new file mode 100644 index 0000000000..f0fc013434 --- /dev/null +++ b/include/configs/M5271EVB.h @@ -0,0 +1,156 @@ +/* + * Configuation settings for the Freescale M5271EVB + * + * Based on MC5272C3 and r5200 board configs + * (C) Copyright 2006 Lab X Technologies <zachary.landau@labxtechnologies.com> + * (C) Copyright 2003 Josef Baumgartner <josef.baumgartner@telex.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * board/config.h - configuration options, board specific + */ + +#ifndef _M5271EVB_H +#define _M5271EVB_H + +#define DEBUG +#undef DEBUG + +/* + * High Level Configuration Options (easy to change) + */ +#define CONFIG_MCF52x2 /* define processor family */ +#define CONFIG_M5271 /* define processor type */ +#define CONFIG_M5271EVB /* define board type */ + +#define CONFIG_IPADDR 192.168.30.1 +#define CONFIG_SERVERIP 192.168.1.1 +#define CONFIG_ETHADDR 00:06:3b:01:41:55 + +#define CONFIG_BAUDRATE 19200 +#define CFG_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 } + +#undef CONFIG_WATCHDOG /* disable watchdog */ + +#define CONFIG_BOOTDELAY 5 + +/* Configuration for environment + * Environment is embedded in u-boot in the second sector of the flash + */ +#ifndef CONFIG_MONITOR_IS_IN_RAM +#define CFG_ENV_OFFSET 0x4000 +#define CFG_ENV_SECT_SIZE 0x2000 +#define CFG_ENV_IS_IN_FLASH 1 +#else +#define CFG_ENV_ADDR 0xffe04000 +#define CFG_ENV_SECT_SIZE 0x2000 +#define CFG_ENV_IS_IN_FLASH 1 +#endif + +#define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_PING | CFG_CMD_NET ) & ~(CFG_CMD_LOADS | CFG_CMD_LOADB)) + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include <cmd_confdefs.h> + +#define CFG_PROMPT "=> " +#define CFG_LONGHELP /* undef to save memory */ + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_LOAD_ADDR 0x00100000 + +#define CFG_MEMTEST_START 0x400 +#define CFG_MEMTEST_END 0x380000 + +#define CFG_HZ 1000000 +#define CFG_CLK 100000000 + +/* + * Low Level Configuration Settings + * (address mappings, register initial values, etc.) + * You should know what you are doing if you make changes here. + */ + +#define CFG_MBAR 0x40000000 /* Register Base Addrs */ + +/* Enable FEC ethernet */ +#define FEC_ENET +#define CONFIG_NET_RETRY_COUNT 5 +#define CFG_ENET_BD_BASE 0x480000 + +/* + * Definitions for initial stack pointer and data area (in DPRAM) + */ +#define CFG_INIT_RAM_ADDR 0x20000000 +#define CFG_INIT_RAM_END 0x1000 /* End of used area in internal SRAM */ +#define CFG_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET + +/* + * Start addresses for the final memory configuration + * (Set up by the startup code) + * Please note that CFG_SDRAM_BASE _must_ start at 0 + */ +#define CFG_SDRAM_BASE 0x00000000 +#define CFG_SDRAM_SIZE 16 /* SDRAM size in MB */ +#define CFG_FLASH_BASE 0xffe00000 + +#ifdef CONFIG_MONITOR_IS_IN_RAM +#define CFG_MONITOR_BASE 0x20000 +#else +#define CFG_MONITOR_BASE (CFG_FLASH_BASE + 0x400) +#endif + +#define CFG_MONITOR_LEN 0x40000 +#define CFG_MALLOC_LEN (256 << 10) +#define CFG_BOOTPARAMS_LEN (64*1024) + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization ?? + */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ + +/* FLASH organization */ +#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 11 /* max number of sectors on one chip */ +#define CFG_FLASH_ERASE_TOUT 1000 + +#define CFG_FLASH_CFI 1 +#define CFG_FLASH_CFI_DRIVER 1 +#define CFG_FLASH_SIZE 0x200000 + +/* Cache Configuration */ +#define CFG_CACHELINE_SIZE 16 + +/* Port configuration */ +#define CFG_FECI2C 0xF0 + +#endif /* _M5271EVB_H */ diff --git a/include/configs/MIP405.h b/include/configs/MIP405.h index db2147b481..7e57a0fae1 100644 --- a/include/configs/MIP405.h +++ b/include/configs/MIP405.h @@ -58,7 +58,6 @@ CFG_CMD_CACHE | \ CFG_CMD_DATE | \ CFG_CMD_DHCP | \ - CFG_CMD_ECHO | \ CFG_CMD_EEPROM | \ CFG_CMD_ELF | \ CFG_CMD_FAT | \ @@ -87,6 +86,8 @@ /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ #include <cmd_confdefs.h> +#define CFG_NAND_LEGACY + #define CFG_HUSH_PARSER #define CFG_PROMPT_HUSH_PS2 "> " /************************************************************** diff --git a/include/configs/MPC8349ADS.h b/include/configs/MPC8349EMDS.h index d6d2fabeec..66f164660e 100644 --- a/include/configs/MPC8349ADS.h +++ b/include/configs/MPC8349EMDS.h @@ -1,5 +1,6 @@ /* - * Copyright 2004 Freescale Semiconductor. + * (C) Copyright 2006 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * * See file CREDITS for list of people who contributed to this * project. @@ -21,9 +22,8 @@ */ /* - * mpc8349ads board configuration file + * mpc8349emds board configuration file * - * Please refer to doc/README.mpc83xxads for more info. */ #ifndef __CONFIG_H @@ -31,25 +31,16 @@ #undef DEBUG -#define CONFIG_MII - /* * High Level Configuration Options */ #define CONFIG_E300 1 /* E300 Family */ #define CONFIG_MPC83XX 1 /* MPC83XX family */ #define CONFIG_MPC8349 1 /* MPC8349 specific */ -#define CONFIG_MPC8349ADS 1 /* MPC8349ADS board specific */ +#define CONFIG_MPC8349EMDS 1 /* MPC8349EMDS board specific */ -/* FIXME: Real PCI support will come in a follow-up update. */ #undef CONFIG_PCI - -#define CONFIG_TSEC_ENET /* tsec ethernet support */ -#define CONFIG_ENV_OVERWRITE - -#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup*/ - -#undef CONFIG_DDR_ECC /* only for ECC DDR module */ +#undef CONFIG_MPC83XX_PCI2 /* support for 2nd PCI controller */ #define PCI_66M #ifdef PCI_66M @@ -61,77 +52,102 @@ #ifndef CONFIG_SYS_CLK_FREQ #ifdef PCI_66M #define CONFIG_SYS_CLK_FREQ 66000000 +#define HRCWL_CSB_TO_CLKIN HRCWL_CSB_TO_CLKIN_4X1 #else #define CONFIG_SYS_CLK_FREQ 33000000 +#define HRCWL_CSB_TO_CLKIN HRCWL_CSB_TO_CLKIN_8X1 #endif #endif -#define CONFIG_BOARD_EARLY_INIT_F /* call board_pre_init */ +#define CONFIG_BOARD_EARLY_INIT_F /* call board_pre_init */ #define CFG_IMMRBAR 0xE0000000 -#undef CFG_DRAM_TEST /* memory test, takes time */ -#define CFG_MEMTEST_START 0x00000000 /* memtest region */ -#define CFG_MEMTEST_END 0x00100000 +#undef CFG_DRAM_TEST /* memory test, takes time */ +#define CFG_MEMTEST_START 0x00000000 /* memtest region */ +#define CFG_MEMTEST_END 0x00100000 /* * DDR Setup */ +#undef CONFIG_DDR_ECC /* only for ECC DDR module */ +#define CONFIG_DDR_ECC_CMD /* use DDR ECC user commands */ +#define CONFIG_SPD_EEPROM /* use SPD EEPROM for DDR setup*/ + +/* + * 32-bit data path mode. + * + * Please note that using this mode for devices with the real density of 64-bit + * effectively reduces the amount of available memory due to the effect of + * wrapping around while translating address to row/columns, for example in the + * 256MB module the upper 128MB get aliased with contents of the lower + * 128MB); normally this define should be used for devices with real 32-bit + * data path. + */ +#undef CONFIG_DDR_32BIT -#define CFG_DDR_BASE 0x00000000 /* DDR is system memory*/ -#define CFG_SDRAM_BASE CFG_DDR_BASE +#define CFG_DDR_BASE 0x00000000 /* DDR is system memory*/ +#define CFG_SDRAM_BASE CFG_DDR_BASE +#define CFG_DDR_SDRAM_BASE CFG_DDR_BASE #undef CONFIG_DDR_2T_TIMING -#define CFG_DDR_SDRAM_BASE CFG_DDR_BASE #if defined(CONFIG_SPD_EEPROM) - /* - * Determine DDR configuration from I2C interface. - */ - #define SPD_EEPROM_ADDRESS 0x51 /* DDR DIMM */ +/* + * Determine DDR configuration from I2C interface. + */ +#define SPD_EEPROM_ADDRESS 0x51 /* DDR DIMM */ #else - /* - * Manually set up DDR parameters - */ - #define CFG_DDR_SIZE 256 /* Mb */ - #define CFG_DDR_CONFIG (CSCONFIG_EN | CSCONFIG_ROW_BIT_13 | CSCONFIG_COL_BIT_9) - #define CFG_DDR_TIMING_1 0x37344321 - #define CFG_DDR_TIMING_2 0x00000800 /* P9-45,may need tuning */ - #define CFG_DDR_CONTROL 0xc2000000 /* unbuffered,no DYN_PWR */ - #define CFG_DDR_MODE 0x00000062 /* DLL,normal,seq,4/2.5 */ - #define CFG_DDR_INTERVAL 0x05200100 /* autocharge,no open page */ +/* + * Manually set up DDR parameters + */ +#define CFG_DDR_SIZE 256 /* MB */ +#define CFG_DDR_CONFIG (CSCONFIG_EN | CSCONFIG_ROW_BIT_13 | CSCONFIG_COL_BIT_10) +#define CFG_DDR_TIMING_1 0x36332321 +#define CFG_DDR_TIMING_2 0x00000800 /* P9-45,may need tuning */ +#define CFG_DDR_CONTROL 0xc2000000 /* unbuffered,no DYN_PWR */ +#define CFG_DDR_INTERVAL 0x04060100 /* autocharge,no open page */ + +#if defined(CONFIG_DDR_32BIT) +/* set burst length to 8 for 32-bit data path */ +#define CFG_DDR_MODE 0x00000023 /* DLL,normal,seq,4/2.5, 8 burst len */ +#else +/* the default burst length is 4 - for 64-bit data path */ +#define CFG_DDR_MODE 0x00000022 /* DLL,normal,seq,4/2.5, 4 burst len */ +#endif #endif /* * SDRAM on the Local Bus */ -#define CFG_LBC_SDRAM_BASE 0xf0000000 /* Localbus SDRAM */ +#define CFG_LBC_SDRAM_BASE 0xF0000000 /* Localbus SDRAM */ #define CFG_LBC_SDRAM_SIZE 64 /* LBC SDRAM is 64MB */ /* * FLASH on the Local Bus */ -#define CFG_FLASH_CFI /* use the Common Flash Interface */ +#define CFG_FLASH_CFI /* use the Common Flash Interface */ #define CFG_FLASH_CFI_DRIVER /* use the CFI driver */ #define CFG_FLASH_BASE 0xFE000000 /* start of FLASH */ -#define CFG_FLASH_SIZE 8 /* FLASH size in MB */ +#define CFG_FLASH_SIZE 8 /* flash size in MB */ /* #define CFG_FLASH_USE_BUFFER_WRITE */ -#define CFG_BR0_PRELIM (CFG_FLASH_BASE | /* Flash Base address */ \ - (2 << BR_PS_SHIFT) | /* 32 bit port size */ \ - BR_V) /* valid */ -#define CFG_OR0_PRELIM 0xff806ff7 /* 16Mb Flash size*/ -#define CFG_LBLAWBAR0_PRELIM CFG_FLASH_BASE /* Window base at flash base */ -#define CFG_LBLAWAR0_PRELIM 0x80000016 /* 16Mb window size */ +#define CFG_BR0_PRELIM (CFG_FLASH_BASE | /* flash Base address */ \ + (2 << BR_PS_SHIFT) | /* 32 bit port size */ \ + BR_V) /* valid */ + +#define CFG_OR0_PRELIM 0xFF806FF7 /* 8 MB flash size */ +#define CFG_LBLAWBAR0_PRELIM CFG_FLASH_BASE /* window base at flash base */ +#define CFG_LBLAWAR0_PRELIM 0x80000016 /* 8 MB window size */ #define CFG_MAX_FLASH_BANKS 1 /* number of banks */ #define CFG_MAX_FLASH_SECT 64 /* sectors per device */ -#undef CFG_FLASH_CHECKSUM +#undef CFG_FLASH_CHECKSUM #define CFG_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ #define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ -#define CFG_MID_FLASH_JUMP 0x7F000000 -#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */ +#define CFG_MID_FLASH_JUMP 0x7F000000 +#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */ #if (CFG_MONITOR_BASE < CFG_FLASH_BASE) #define CFG_RAMBOOT @@ -140,25 +156,25 @@ #endif /* - * BCSR register on local bus 32KB, 8-bit wide for ADS config reg + * BCSR register on local bus 32KB, 8-bit wide for MDS config reg */ -#define CFG_BCSR 0xF8000000 -#define CFG_LBLAWBAR1_PRELIM CFG_BCSR /* Access window base at BCSR base */ -#define CFG_LBLAWAR1_PRELIM 0x8000000E /* Access window size 32K */ -#define CFG_BR1_PRELIM (CFG_BCSR|0x00000801) /* Port-size=8bit, MSEL=GPCM */ -#define CFG_OR1_PRELIM 0xFFFFE8f0 /* length 32K */ +#define CFG_BCSR 0xE2400000 +#define CFG_LBLAWBAR1_PRELIM CFG_BCSR /* Access window base at BCSR base */ +#define CFG_LBLAWAR1_PRELIM 0x8000000E /* Access window size 32K */ +#define CFG_BR1_PRELIM (CFG_BCSR|0x00000801) /* Port-size=8bit, MSEL=GPCM */ +#define CFG_OR1_PRELIM 0xFFFFE8F0 /* length 32K */ #define CONFIG_L1_INIT_RAM -#define CFG_INIT_RAM_LOCK 1 -#define CFG_INIT_RAM_ADDR 0xe4010000 /* Initial RAM address */ -#define CFG_INIT_RAM_END 0x1000 /* End of used area in RAM*/ +#define CFG_INIT_RAM_LOCK 1 +#define CFG_INIT_RAM_ADDR 0xFD000000 /* Initial RAM address */ +#define CFG_INIT_RAM_END 0x1000 /* End of used area in RAM*/ -#define CFG_GBL_DATA_SIZE 0x100 /* num bytes initial data */ +#define CFG_GBL_DATA_SIZE 0x100 /* num bytes initial data */ #define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) #define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET -#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ -#define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */ +#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ +#define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */ /* * Local Bus LCRR and LBCR regs @@ -172,7 +188,7 @@ #define CFG_LB_SDRAM /* if board has SRDAM on local bus */ #ifdef CFG_LB_SDRAM -/*local bus BR2, OR2 definition for SDRAM if soldered on the ADS board*/ +/* Local bus BR2, OR2 definition for SDRAM if soldered on the MDS board */ /* * Base Register 2 and Option Register 2 configure SDRAM. * The SDRAM base address, CFG_LBC_SDRAM_BASE, is 0xf0000000. @@ -185,34 +201,34 @@ * Valid = BR[31] = 1 * * 0 4 8 12 16 20 24 28 - * 1111 0000 0000 0000 0001 1000 0110 0001 = f0001861 + * 1111 0000 0000 0000 0001 1000 0110 0001 = F0001861 * * FIXME: CFG_LBC_SDRAM_BASE should be masked and OR'ed into * FIXME: the top 17 bits of BR2. */ -#define CFG_BR2_PRELIM 0xf0001861 /*Port-size=32bit, MSEL=SDRAM*/ +#define CFG_BR2_PRELIM 0xF0001861 /* Port-size=32bit, MSEL=SDRAM */ #define CFG_LBLAWBAR2_PRELIM 0xF0000000 -#define CFG_LBLAWAR2_PRELIM 0x80000019 /*64M*/ +#define CFG_LBLAWAR2_PRELIM 0x80000019 /* 64M */ /* * The SDRAM size in MB, CFG_LBC_SDRAM_SIZE, is 64. * * For OR2, need: * 64MB mask for AM, OR2[0:7] = 1111 1100 - * XAM, OR2[17:18] = 11 + * XAM, OR2[17:18] = 11 * 9 columns OR2[19-21] = 010 * 13 rows OR2[23-25] = 100 * EAD set for extra time OR[31] = 1 * * 0 4 8 12 16 20 24 28 - * 1111 1100 0000 0000 0110 1001 0000 0001 = fc006901 + * 1111 1100 0000 0000 0110 1001 0000 0001 = FC006901 */ -#define CFG_OR2_PRELIM 0xfc006901 +#define CFG_OR2_PRELIM 0xFC006901 #define CFG_LBC_LSRT 0x32000000 /* LB sdram refresh timer, about 6us */ -#define CFG_LBC_MRTPR 0x20000000 /* LB refresh timer prescal, 266MHz/32*/ +#define CFG_LBC_MRTPR 0x20000000 /* LB refresh timer prescal, 266MHz/32 */ /* * LSDMR masks @@ -274,7 +290,7 @@ * Serial Port */ #define CONFIG_CONS_INDEX 1 -#undef CONFIG_SERIAL_SOFTWARE_FIFO +#undef CONFIG_SERIAL_SOFTWARE_FIFO #define CFG_NS16550 #define CFG_NS16550_SERIAL #define CFG_NS16550_REG_SIZE 1 @@ -293,13 +309,13 @@ #endif /* I2C */ -#define CONFIG_HARD_I2C /* I2C with hardware support*/ -#undef CONFIG_SOFT_I2C /* I2C bit-banged */ +#define CONFIG_HARD_I2C /* I2C with hardware support*/ +#undef CONFIG_SOFT_I2C /* I2C bit-banged */ #define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ #define CFG_I2C_SLAVE 0x7F -#define CFG_I2C_NOPROBES {0x69} /* Don't probe these addrs */ -#define CFG_I2C_OFFSET 0x3000 -#define CFG_I2C2_OFFSET 0x3100 +#define CFG_I2C_NOPROBES {0x69} /* Don't probe these addrs */ +#define CFG_I2C_OFFSET 0x3000 +#define CFG_I2C2_OFFSET 0x3100 /* TSEC */ #define CFG_TSEC1_OFFSET 0x24000 @@ -307,18 +323,8 @@ #define CFG_TSEC2_OFFSET 0x25000 #define CFG_TSEC2 (CFG_IMMRBAR+CFG_TSEC2_OFFSET) -/* IO Configuration */ -#define CFG_IO_CONF (\ - IO_CONF_UART |\ - IO_CONF_TSEC1 |\ - IO_CONF_IRQ0 |\ - IO_CONF_IRQ1 |\ - IO_CONF_IRQ2 |\ - IO_CONF_IRQ3 |\ - IO_CONF_IRQ4 |\ - IO_CONF_IRQ5 |\ - IO_CONF_IRQ6 |\ - IO_CONF_IRQ7 ) +/* USB */ +#define CFG_USE_MPC834XSYS_USB_PHY 1 /* Use SYS board PHY */ /* * General PCI @@ -326,20 +332,27 @@ */ #define CFG_PCI1_MEM_BASE 0x80000000 #define CFG_PCI1_MEM_PHYS CFG_PCI1_MEM_BASE -#define CFG_PCI1_MEM_SIZE 0x20000000 /* 512M */ +#define CFG_PCI1_MEM_SIZE 0x10000000 /* 256M */ +#define CFG_PCI1_MMIO_BASE 0x90000000 +#define CFG_PCI1_MMIO_PHYS CFG_PCI1_MMIO_BASE +#define CFG_PCI1_MMIO_SIZE 0x10000000 /* 256M */ #define CFG_PCI1_IO_BASE 0x00000000 -#define CFG_PCI1_IO_PHYS 0xe2000000 -#define CFG_PCI1_IO_SIZE 0x1000000 /* 16M */ +#define CFG_PCI1_IO_PHYS 0xE2000000 +#define CFG_PCI1_IO_SIZE 0x00100000 /* 1M */ #define CFG_PCI2_MEM_BASE 0xA0000000 #define CFG_PCI2_MEM_PHYS CFG_PCI2_MEM_BASE -#define CFG_PCI2_MEM_SIZE 0x20000000 /* 512M */ +#define CFG_PCI2_MEM_SIZE 0x10000000 /* 256M */ +#define CFG_PCI2_MMIO_BASE 0xB0000000 +#define CFG_PCI2_MMIO_PHYS CFG_PCI2_MMIO_BASE +#define CFG_PCI2_MMIO_SIZE 0x10000000 /* 256M */ #define CFG_PCI2_IO_BASE 0x00000000 -#define CFG_PCI2_IO_PHYS 0xe3000000 -#define CFG_PCI2_IO_SIZE 0x1000000 /* 16M */ +#define CFG_PCI2_IO_PHYS 0xE2100000 +#define CFG_PCI2_IO_SIZE 0x00100000 /* 1M */ + #if defined(CONFIG_PCI) -#define PCI_ALL_PCI1 +#define PCI_ONE_PCI1 #if defined(PCI_64BIT) #undef PCI_ALL_PCI1 #undef PCI_TWO_PCI1 @@ -347,7 +360,7 @@ #endif #define CONFIG_NET_MULTI -#define CONFIG_PCI_PNP /* do pci plug-and-play */ +#define CONFIG_PCI_PNP /* do pci plug-and-play */ #undef CONFIG_EEPRO100 #undef CONFIG_TULIP @@ -363,9 +376,14 @@ #endif /* CONFIG_PCI */ +/* + * TSEC configuration + */ +#define CONFIG_TSEC_ENET /* TSEC ethernet support */ + #if defined(CONFIG_TSEC_ENET) #ifndef CONFIG_NET_MULTI -#define CONFIG_NET_MULTI 1 +#define CONFIG_NET_MULTI 1 #endif #define CONFIG_GMII 1 /* MII PHY management */ @@ -384,13 +402,24 @@ #endif /* CONFIG_TSEC_ENET */ /* + * Configure on-board RTC + */ +#define CONFIG_RTC_DS1374 /* use ds1374 rtc via i2c */ +#define CFG_I2C_RTC_ADDR 0x68 /* at address 0x68 */ + +/* * Environment */ #ifndef CFG_RAMBOOT #define CFG_ENV_IS_IN_FLASH 1 #define CFG_ENV_ADDR (CFG_MONITOR_BASE + 0x40000) - #define CFG_ENV_SECT_SIZE 0x40000 /* 256K(one sector) for env */ + #define CFG_ENV_SECT_SIZE 0x20000 /* 128K(one sector) for env */ #define CFG_ENV_SIZE 0x2000 + +/* Address and size of Redundant Environment Sector */ +#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR + CFG_ENV_SECT_SIZE) +#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) + #else #define CFG_NO_FLASH 1 /* Flash is not usable now */ #define CFG_ENV_IS_NOWHERE 1 /* Store ENV in memory only */ @@ -406,14 +435,16 @@ #define CONFIG_COMMANDS ((CONFIG_CMD_DFL \ | CFG_CMD_PING \ | CFG_CMD_PCI \ - | CFG_CMD_I2C) \ + | CFG_CMD_I2C \ + | CFG_CMD_DATE) \ & \ ~(CFG_CMD_ENV \ | CFG_CMD_LOADS)) #else #define CONFIG_COMMANDS ((CONFIG_CMD_DFL \ | CFG_CMD_PING \ - | CFG_CMD_I2C) \ + | CFG_CMD_I2C \ + | CFG_CMD_DATE) \ & \ ~(CFG_CMD_ENV \ | CFG_CMD_LOADS)) @@ -423,12 +454,15 @@ #define CONFIG_COMMANDS (CONFIG_CMD_DFL \ | CFG_CMD_PCI \ | CFG_CMD_PING \ - | CFG_CMD_I2C) + | CFG_CMD_I2C \ + | CFG_CMD_DATE \ + ) #else #define CONFIG_COMMANDS (CONFIG_CMD_DFL \ | CFG_CMD_PING \ - | CFG_CMD_I2C \ - | CFG_CMD_MII \ + | CFG_CMD_I2C \ + | CFG_CMD_MII \ + | CFG_CMD_DATE \ ) #endif #endif @@ -440,7 +474,7 @@ /* * Miscellaneous configurable options */ -#define CFG_LONGHELP /* undef to save memory */ +#define CFG_LONGHELP /* undef to save memory */ #define CFG_LOAD_ADDR 0x2000000 /* default load address */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ @@ -471,12 +505,42 @@ #define CFG_RCWH_PCIHOST 0x80000000 /* PCIHOST */ +#if 1 /*528/264*/ #define CFG_HRCW_LOW (\ HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\ HRCWL_DDR_TO_SCB_CLK_1X1 |\ - HRCWL_CSB_TO_CLKIN_4X1 |\ + HRCWL_CSB_TO_CLKIN |\ HRCWL_VCO_1X2 |\ HRCWL_CORE_TO_CSB_2X1) +#elif 0 /*396/132*/ +#define CFG_HRCW_LOW (\ + HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\ + HRCWL_DDR_TO_SCB_CLK_1X1 |\ + HRCWL_CSB_TO_CLKIN |\ + HRCWL_VCO_1X4 |\ + HRCWL_CORE_TO_CSB_3X1) +#elif 0 /*264/132*/ +#define CFG_HRCW_LOW (\ + HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\ + HRCWL_DDR_TO_SCB_CLK_1X1 |\ + HRCWL_CSB_TO_CLKIN |\ + HRCWL_VCO_1X4 |\ + HRCWL_CORE_TO_CSB_2X1) +#elif 0 /*132/132*/ +#define CFG_HRCW_LOW (\ + HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\ + HRCWL_DDR_TO_SCB_CLK_1X1 |\ + HRCWL_CSB_TO_CLKIN |\ + HRCWL_VCO_1X4 |\ + HRCWL_CORE_TO_CSB_1X1) +#elif 0 /*264/264 */ +#define CFG_HRCW_LOW (\ + HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\ + HRCWL_DDR_TO_SCB_CLK_1X1 |\ + HRCWL_CSB_TO_CLKIN |\ + HRCWL_VCO_1X4 |\ + HRCWL_CORE_TO_CSB_1X1) +#endif #if defined(PCI_64BIT) #define CFG_HRCW_HIGH (\ @@ -506,16 +570,77 @@ HRCWH_TSEC2M_IN_GMII ) #endif -#define CFG_HID0_INIT 0x000000000 +/* System IO Config */ +#define CFG_SICRH SICRH_TSOBI1 +#define CFG_SICRL SICRL_LDP_A -#define CFG_HID0_FINAL CFG_HID0_INIT +#define CFG_HID0_INIT 0x000000000 +#define CFG_HID0_FINAL HID0_ENABLE_MACHINE_CHECK /* #define CFG_HID0_FINAL (\ HID0_ENABLE_INSTRUCTION_CACHE |\ HID0_ENABLE_M_BIT |\ HID0_ENABLE_ADDRESS_BROADCAST ) */ -#define CFG_HID2 0x000000000 + +#define CFG_HID2 HID2_HBE + +/* DDR @ 0x00000000 */ +#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) +#define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) + +/* PCI @ 0x80000000 */ +#ifdef CONFIG_PCI +#define CFG_IBAT1L (CFG_PCI1_MEM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) +#define CFG_IBAT1U (CFG_PCI1_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) +#define CFG_IBAT2L (CFG_PCI1_MMIO_BASE | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CFG_IBAT2U (CFG_PCI1_MMIO_BASE | BATU_BL_256M | BATU_VS | BATU_VP) +#else +#define CFG_IBAT1L (0) +#define CFG_IBAT1U (0) +#define CFG_IBAT2L (0) +#define CFG_IBAT2U (0) +#endif + +#ifdef CONFIG_MPC83XX_PCI2 +#define CFG_IBAT3L (CFG_PCI2_MEM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) +#define CFG_IBAT3U (CFG_PCI2_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) +#define CFG_IBAT4L (CFG_PCI2_MMIO_BASE | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CFG_IBAT4U (CFG_PCI2_MMIO_BASE | BATU_BL_256M | BATU_VS | BATU_VP) +#else +#define CFG_IBAT3L (0) +#define CFG_IBAT3U (0) +#define CFG_IBAT4L (0) +#define CFG_IBAT4U (0) +#endif + +/* IMMRBAR @ 0xE0000000, PCI IO @ 0xE2000000 & BCSR @ 0xE2400000 */ +#define CFG_IBAT5L (CFG_IMMRBAR | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CFG_IBAT5U (CFG_IMMRBAR | BATU_BL_256M | BATU_VS | BATU_VP) + +/* SDRAM @ 0xF0000000, stack in DCACHE 0xFDF00000 & FLASH @ 0xFE000000 */ +#define CFG_IBAT6L (0xF0000000 | BATL_PP_10 | BATL_MEMCOHERENCE) +#define CFG_IBAT6U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP) + +#define CFG_IBAT7L (0) +#define CFG_IBAT7U (0) + +#define CFG_DBAT0L CFG_IBAT0L +#define CFG_DBAT0U CFG_IBAT0U +#define CFG_DBAT1L CFG_IBAT1L +#define CFG_DBAT1U CFG_IBAT1U +#define CFG_DBAT2L CFG_IBAT2L +#define CFG_DBAT2U CFG_IBAT2U +#define CFG_DBAT3L CFG_IBAT3L +#define CFG_DBAT3U CFG_IBAT3U +#define CFG_DBAT4L CFG_IBAT4L +#define CFG_DBAT4U CFG_IBAT4U +#define CFG_DBAT5L CFG_IBAT5L +#define CFG_DBAT5U CFG_IBAT5U +#define CFG_DBAT6L CFG_IBAT6L +#define CFG_DBAT6U CFG_IBAT6U +#define CFG_DBAT7L CFG_IBAT7L +#define CFG_DBAT7U CFG_IBAT7U /* * Internal Definitions @@ -533,52 +658,59 @@ /* * Environment Configuration */ +#define CONFIG_ENV_OVERWRITE #if defined(CONFIG_TSEC_ENET) -#define CONFIG_ETHADDR 00:04:9f:11:22:33 +#define CONFIG_ETHADDR 00:04:9f:ef:23:33 #define CONFIG_HAS_ETH1 -#define CONFIG_ETH1ADDR 00:E0:0C:00:7D:01 +#define CONFIG_ETH1ADDR 00:E0:0C:00:7E:21 #endif -#define CONFIG_IPADDR 192.168.1.253 +#define CONFIG_IPADDR 192.168.205.5 -#define CONFIG_HOSTNAME unknown -#define CONFIG_ROOTPATH /nfsroot -#define CONFIG_BOOTFILE your.uImage +#define CONFIG_HOSTNAME mpc8349emds +#define CONFIG_ROOTPATH /opt/eldk/ppc_6xx +#define CONFIG_BOOTFILE /tftpboot/tqm83xx/uImage -#define CONFIG_SERVERIP 192.168.1.1 -#define CONFIG_GATEWAYIP 192.168.1.1 -#define CONFIG_NETMASK 255.255.255.0 +#define CONFIG_SERVERIP 192.168.1.1 +#define CONFIG_GATEWAYIP 192.168.1.1 +#define CONFIG_NETMASK 255.255.255.0 -#define CONFIG_LOADADDR 200000 /* default location for tftp and bootm */ +#define CONFIG_LOADADDR 200000 /* default location for tftp and bootm */ -#define CONFIG_BOOTDELAY 6 /* -1 disables auto-boot */ -#undef CONFIG_BOOTARGS /* the boot command will set bootargs */ +#define CONFIG_BOOTDELAY 6 /* -1 disables auto-boot */ +#undef CONFIG_BOOTARGS /* the boot command will set bootargs */ #define CONFIG_BAUDRATE 115200 - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "netdev=eth0\0" \ - "consoledev=ttyS0\0" \ - "ramdiskaddr=400000\0" \ - "ramdiskfile=ramfs.83xx\0" - -#define CONFIG_NFSBOOTCOMMAND \ - "setenv bootargs root=/dev/nfs rw " \ - "nfsroot=$serverip:$rootpath " \ - "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "tftp $loadaddr $bootfile;" \ - "bootm $loadaddr" - -#define CONFIG_RAMBOOTCOMMAND \ - "setenv bootargs root=/dev/ram rw " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "tftp $ramdiskaddr $ramdiskfile;" \ - "tftp $loadaddr $bootfile;" \ - "bootm $loadaddr $ramdiskaddr" - -#define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND +#define CONFIG_PREBOOT "echo;" \ + "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \ + "echo" + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "hostname=mpc8349emds\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=${serverip}:${rootpath}\0" \ + "ramargs=setenv bootargs root=/dev/ram rw\0" \ + "addip=setenv bootargs ${bootargs} " \ + "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ + ":${hostname}:${netdev}:off panic=1\0" \ + "addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\ + "flash_nfs=run nfsargs addip addtty;" \ + "bootm ${kernel_addr}\0" \ + "flash_self=run ramargs addip addtty;" \ + "bootm ${kernel_addr} ${ramdisk_addr}\0" \ + "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \ + "bootm\0" \ + "rootpath=/opt/eldk/ppc_6xx\0" \ + "bootfile=/tftpboot/mpc8349emds/uImage\0" \ + "load=tftp 100000 /tftpboot/mpc8349emds/u-boot.bin\0" \ + "update=protect off fe000000 fe03ffff; " \ + "era fe000000 fe03ffff; cp.b 100000 fe000000 ${filesize}\0" \ + "upd=run load;run update\0" \ + "" + +#define CONFIG_BOOTCOMMAND "run flash_self" #endif /* __CONFIG_H */ diff --git a/include/configs/MPC86xADS.h b/include/configs/MPC86xADS.h index 565f9bb5c0..831cc5ecd3 100644 --- a/include/configs/MPC86xADS.h +++ b/include/configs/MPC86xADS.h @@ -21,7 +21,7 @@ #define CONFIG_MPC86xADS 1 /* new ADS */ #define CONFIG_FADS 1 /* We are FADS compatible (more or less) */ -/* New MPC86xADS - pick one of these */ +/* CPU type - pick one of these */ #define CONFIG_MPC866T 1 #undef CONFIG_MPC866P #undef CONFIG_MPC859T @@ -33,7 +33,10 @@ #undef CONFIG_8xx_CONS_NONE #define CONFIG_BAUDRATE 38400 -#define CONFIG_8xx_OSCLK 10000000 /* 10MHz oscillator on EXTCLK */ +#define CONFIG_8xx_OSCLK 10000000 /* 10MHz oscillator on EXTCLK */ +#define CONFIG_8xx_CPUCLK_DEFAULT 50000000 +#define CFG_8xx_CPUCLK_MIN 40000000 +#define CFG_8xx_CPUCLK_MAX 80000000 #define CONFIG_DRAM_50MHZ 1 #define CONFIG_SDRAM_50MHZ 1 diff --git a/include/configs/MPC885ADS.h b/include/configs/MPC885ADS.h index 74318e5545..1867c5bf0a 100644 --- a/include/configs/MPC885ADS.h +++ b/include/configs/MPC885ADS.h @@ -1,44 +1,34 @@ /* * A collection of structures, addresses, and values associated with - * the Motorola DUET ADS board. Values common to all FADS family boards + * the Motorola MPC885ADS board. Values common to all FADS family boards * are in board/fads/fads.h * - * Copyright (C) 2003 Arabella Software Ltd. + * Copyright (C) 2003-2004 Arabella Software Ltd. * Yuli Barcohen <yuli@arabellasw.com> */ #ifndef __CONFIG_H #define __CONFIG_H -/* Board type */ -#define CONFIG_MPC885ADS 1 /* Duet (MPC87x/88x) ADS */ +#define CONFIG_MPC885ADS 1 /* MPC885ADS board */ #define CONFIG_FADS 1 /* We are FADS compatible (more or less) */ -#define CONFIG_MPC885 1 /* MPC885 CPU (Duet family) */ +#define CONFIG_MPC885 1 /* MPC885 CPU (Duet family) */ -#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */ +#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */ #undef CONFIG_8xx_CONS_SMC2 #undef CONFIG_8xx_CONS_NONE #define CONFIG_BAUDRATE 38400 -#define CONFIG_8xx_OSCLK 10000000 /* 10 MHz oscillator on EXTCLK */ - -#define CFG_PLPRCR ((1 << PLPRCR_MFD_SHIFT) | (12 << PLPRCR_MFI_SHIFT) | PLPRCR_TEXPS) +#define CONFIG_8xx_OSCLK 10000000 /* 10 MHz oscillator on EXTCLK */ +#define CONFIG_8xx_CPUCLK_DEFAULT 50000000 +#define CFG_8xx_CPUCLK_MIN 40000000 +#define CFG_8xx_CPUCLK_MAX 133000000 #define CONFIG_SDRAM_50MHZ 1 -#define CONFIG_COMMANDS (CONFIG_CMD_DFL \ - | CFG_CMD_DHCP \ - | CFG_CMD_IMMAP \ - | CFG_CMD_MII \ - | CFG_CMD_PING \ - ) - #include "fads.h" -#undef CFG_SCCR -#define CFG_SCCR (SCCR_TBS|SCCR_EBDF11) - #define CFG_OR5_PRELIM 0xFFFF8110 /* 64Kbyte address space */ #define CFG_BR5_PRELIM (CFG_PHYDEV_ADDR | BR_PS_8 | BR_V) diff --git a/include/configs/NC650.h b/include/configs/NC650.h index 371ea17edd..8da29c4afc 100644 --- a/include/configs/NC650.h +++ b/include/configs/NC650.h @@ -1,4 +1,5 @@ /* + * (C) Copyright 2006 Detlev Zundel, dzu@denx.de * (C) Copyright 2005 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * @@ -65,6 +66,11 @@ #define CFG_8XX_XIN CONFIG_8xx_OSCLK #define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ +#define CONFIG_AUTOBOOT_KEYED +#define CONFIG_AUTOBOOT_PROMPT "\nEnter password - autoboot in %d seconds...\n" +#define CONFIG_AUTOBOOT_DELAY_STR "ids" +#define CONFIG_BOOT_RETRY_TIME 900 +#define CONFIG_BOOT_RETRY_MIN 30 #define CONFIG_PREBOOT "echo;echo Type \"run flash_nfs\" to mount root filesystem over NFS;echo" @@ -75,7 +81,7 @@ "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off;" \ "bootm" -#undef CONFIG_WATCHDOG /* watchdog disabled */ +#define CONFIG_WATCHDOG /* watchdog enabled */ #undef CONFIG_STATUS_LED /* Status LED disabled */ @@ -96,12 +102,26 @@ /* * Software (bit-bang) I2C driver configuration */ +#if defined(CONFIG_IDS852_REV1) + #define SCL 0x1000 /* PA 3 */ #define SDA 0x2000 /* PA 2 */ #define __I2C_DIR immr->im_ioport.iop_padir #define __I2C_DAT immr->im_ioport.iop_padat #define __I2C_PAR immr->im_ioport.iop_papar + +#elif defined(CONFIG_IDS852_REV2) + +#define SCL 0x0002 /* PB 30 */ +#define SDA 0x0001 /* PB 31 */ + +#define __I2C_PAR immr->im_cpm.cp_pbpar +#define __I2C_DIR immr->im_cpm.cp_pbdir +#define __I2C_DAT immr->im_cpm.cp_pbdat + +#endif + #define I2C_INIT { __I2C_PAR &= ~(SDA|SCL); \ __I2C_DIR |= (SDA|SCL); } #define I2C_READ ((__I2C_DAT & SDA) ? 1 : 0) @@ -217,6 +237,8 @@ /* * NAND flash support */ +#define CFG_NAND_LEGACY + #define CFG_MAX_NAND_DEVICE 1 #define NAND_ChipID_UNKNOWN 0x00 #define SECTORSIZE 512 @@ -227,17 +249,6 @@ #define ADDR_COLUMN 1 #define NAND_NO_RB -#define NAND_WAIT_READY(nand) udelay(12) -#define WRITE_NAND_COMMAND(d, adr) WRITE_NAND(d, adr + 2) -#define WRITE_NAND_ADDRESS(d, adr) WRITE_NAND(d, adr + 1) -#define WRITE_NAND(d, adr) (*(volatile uint8_t *)(adr) = (uint8_t)(d)) -#define READ_NAND(adr) (*(volatile uint8_t *)(adr)) -#define NAND_DISABLE_CE(nand) /* nop */ -#define NAND_ENABLE_CE(nand) /* nop */ -#define NAND_CTL_CLRALE(nandptr) /* nop */ -#define NAND_CTL_SETALE(nandptr) /* nop */ -#define NAND_CTL_CLRCLE(nandptr) /* nop */ -#define NAND_CTL_SETCLE(nandptr) /* nop */ /*----------------------------------------------------------------------- * SYPCR - System Protection Control 11-9 @@ -310,7 +321,8 @@ #define CFG_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_8 | BR_V) /* - * BR2 and OR2 (NAND Flash) - now addressed through UPMB + * BR2 and OR2 (NAND Flash) - addressed through UPMB on rev 1 + * rev2 only uses the chipselect */ #define CFG_NAND_BASE 0x50000000 #define CFG_NAND_SIZE 0x04000000 @@ -336,6 +348,18 @@ #define CFG_BR3_PRELIM ((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V) /* + * BR4 and OR4 (CPLD) + */ +#define CFG_CPLD_BASE 0x80000000 /* CPLD */ +#define CFG_CPLD_SIZE 0x10000 /* only 16 used */ + +#define CFG_OR_TIMING_CPLD (OR_CSNT_SAM | OR_ACS_DIV1 | OR_BI | \ + OR_SCY_1_CLK) + +#define CFG_BR4_PRELIM ((CFG_CPLD_BASE & BR_BA_MSK) | BR_PS_8 | BR_V ) +#define CFG_OR4_PRELIM (((-CFG_CPLD_SIZE) & OR_AM_MSK) | CFG_OR_TIMING_CPLD) + +/* * BR5 and OR5 (SRAM) */ #define CFG_SRAM_BASE 0x60000000 @@ -347,6 +371,16 @@ #define CFG_BR5_PRELIM ((CFG_SRAM_BASE & BR_BA_MSK) | BR_PS_8 | BR_V ) #define CFG_OR5_PRELIM (((-CFG_SRAM_SIZE) & OR_AM_MSK) | CFG_OR_TIMING_SRAM) +#if defined(CONFIG_CP850) +/* + * BR6 and OR6 (DPRAM) - only on CP850 + */ +#define CFG_OR6_PRELIM 0xffff8170 +#define CFG_BR6_PRELIM 0xa0000401 +#define DPRAM_BASE_ADDR 0xa0000000 + +#define CONFIG_MISC_INIT_R 1 +#endif /* * 4096 Rows from SDRAM example configuration @@ -411,14 +445,12 @@ #define CONFIG_JFFS2_PART_OFFSET 0x00000000 /* mtdparts command line support */ -/* #define CONFIG_JFFS2_CMDLINE #define MTDIDS_DEFAULT "nor0=nc650-0,nand0=nc650-nand" #define MTDPARTS_DEFAULT "mtdparts=nc650-0:1m(kernel1),1m(kernel2)," \ - "2560k(cramfs1),2560k(cramfs2)," \ - "256k(u-boot),256k(env);" \ - "nc650-nand:4m(nand1),28m(nand2)" -*/ + "4m(cramfs1),1m(cramfs2)," \ + "256k(u-boot),128k(env);" \ + "nc650-nand:4m(jffs1),28m(jffs2)" #endif /* __CONFIG_H */ diff --git a/include/configs/NETPHONE.h b/include/configs/NETPHONE.h index bf4c899592..444f721cc8 100644 --- a/include/configs/NETPHONE.h +++ b/include/configs/NETPHONE.h @@ -491,6 +491,7 @@ /****************************************************************/ /* NAND */ +#define CFG_NAND_LEGACY #define CFG_NAND_BASE NAND_BASE #define CONFIG_MTD_NAND_ECC_JFFS2 #define CONFIG_MTD_NAND_VERIFY_WRITE diff --git a/include/configs/NETTA.h b/include/configs/NETTA.h index 1bcd88d208..25b63457c7 100644 --- a/include/configs/NETTA.h +++ b/include/configs/NETTA.h @@ -609,6 +609,7 @@ /****************************************************************/ /* NAND */ +#define CFG_NAND_LEGACY #define CFG_NAND_BASE NAND_BASE #define CONFIG_MTD_NAND_VERIFY_WRITE #define CONFIG_MTD_NAND_UNSAFE diff --git a/include/configs/NETTA2.h b/include/configs/NETTA2.h index 529cb4cbae..e20e72495c 100644 --- a/include/configs/NETTA2.h +++ b/include/configs/NETTA2.h @@ -491,6 +491,7 @@ /****************************************************************/ /* NAND */ +#define CFG_NAND_LEGACY #define CFG_NAND_BASE NAND_BASE #define CONFIG_MTD_NAND_ECC_JFFS2 #define CONFIG_MTD_NAND_VERIFY_WRITE diff --git a/include/configs/NETVIA.h b/include/configs/NETVIA.h index dc6b15fcdc..e30be0987a 100644 --- a/include/configs/NETVIA.h +++ b/include/configs/NETVIA.h @@ -387,6 +387,8 @@ /*****************************************************************************/ +#define CFG_NAND_LEGACY + #if defined(CONFIG_NETVIA_VERSION) && CONFIG_NETVIA_VERSION >= 2 /* NAND */ diff --git a/include/configs/PCIPPC2.h b/include/configs/PCIPPC2.h index d03706e193..3a97fbcbde 100644 --- a/include/configs/PCIPPC2.h +++ b/include/configs/PCIPPC2.h @@ -77,6 +77,7 @@ */ #include <cmd_confdefs.h> +#define CFG_NAND_LEGACY /* * Miscellaneous configurable options diff --git a/include/configs/PCIPPC6.h b/include/configs/PCIPPC6.h index 92b2f7cf83..130beb78e6 100644 --- a/include/configs/PCIPPC6.h +++ b/include/configs/PCIPPC6.h @@ -79,6 +79,7 @@ */ #include <cmd_confdefs.h> +#define CFG_NAND_LEGACY /* * Miscellaneous configurable options diff --git a/include/configs/PIP405.h b/include/configs/PIP405.h index 9668fb0ce2..806e95f480 100644 --- a/include/configs/PIP405.h +++ b/include/configs/PIP405.h @@ -50,7 +50,6 @@ CFG_CMD_PCI | \ CFG_CMD_CACHE | \ CFG_CMD_IRQ | \ - CFG_CMD_ECHO | \ CFG_CMD_EEPROM | \ CFG_CMD_I2C | \ CFG_CMD_REGINFO | \ @@ -69,6 +68,8 @@ /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ #include <cmd_confdefs.h> +#define CFG_NAND_LEGACY + #define CFG_HUSH_PARSER #define CFG_PROMPT_HUSH_PS2 "> " /************************************************************** diff --git a/include/configs/PK1C20.h b/include/configs/PK1C20.h index 91e95186a2..83a7ec27b4 100644 --- a/include/configs/PK1C20.h +++ b/include/configs/PK1C20.h @@ -32,7 +32,7 @@ #define CFG_RESET_ADDR 0x00000000 /* Hard-reset address */ #define CFG_EXCEPTION_ADDR 0x01000020 /* Exception entry point*/ -#define CFG_NIOS_SYSID_BASE 0x00920828 /* System id address */ +#define CFG_NIOS_SYSID_BASE 0x021208b8 /* System id address */ #define CONFIG_BOARD_EARLY_INIT_F 1 /* enable early board-spec. init*/ /*------------------------------------------------------------------------ @@ -51,7 +51,7 @@ #define CFG_FLASH_SIZE 0x00800000 /* 8 MByte */ #define CFG_SDRAM_BASE 0x01000000 /* SDRAM base addr */ #define CFG_SDRAM_SIZE 0x01000000 /* 16 MByte */ -#define CFG_SRAM_BASE 0x00800000 /* SRAM base addr */ +#define CFG_SRAM_BASE 0x02000000 /* SRAM base addr */ #define CFG_SRAM_SIZE 0x00100000 /* 1 MB (only 1M mapped)*/ /*------------------------------------------------------------------------ @@ -61,7 +61,7 @@ * -Global data is placed below the heap. * -The stack is placed below global data (&grows down). *----------------------------------------------------------------------*/ -#define CFG_MONITOR_LEN (128 * 1024) /* Reserve 128k */ +#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 128k */ #define CFG_GBL_DATA_SIZE 128 /* Global data size rsvd*/ #define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024) @@ -95,9 +95,9 @@ * CONSOLE *----------------------------------------------------------------------*/ #if defined(CONFIG_CONSOLE_JTAG) -#define CFG_NIOS_CONSOLE 0x00920820 /* JTAG UART base addr */ +#define CFG_NIOS_CONSOLE 0x021208b0 /* JTAG UART base addr */ #else -#define CFG_NIOS_CONSOLE 0x009208a0 /* UART base addr */ +#define CFG_NIOS_CONSOLE 0x02120840 /* UART base addr */ #endif #define CFG_NIOS_FIXEDBAUD 1 /* Baudrate is fixed */ @@ -110,9 +110,9 @@ * EPCS Device -- wne CFG_NIOS_EPCSBASE is defined code/commands for * epcs device access is enabled. The base address is the epcs * _register_ base address, NOT THE ADDRESS OF THE MEMORY BLOCK. - * The register base is currently at offset 0x400 from the memory base. + * The register base is currently at offset 0x600 from the memory base. *----------------------------------------------------------------------*/ -#define CFG_NIOS_EPCSBASE 0x00900400 /* EPCS register base */ +#define CFG_NIOS_EPCSBASE 0x02100200 /* EPCS register base */ /*------------------------------------------------------------------------ * DEBUG @@ -126,7 +126,7 @@ * registers, we can slow it down to 10 msec using TMRCNT. If the default * period is acceptable, TMRCNT can be left undefined. *----------------------------------------------------------------------*/ -#define CFG_NIOS_TMRBASE 0x00920860 /* Tick timer base addr */ +#define CFG_NIOS_TMRBASE 0x02120820 /* Tick timer base addr */ #define CFG_NIOS_TMRIRQ 3 /* Timer IRQ num */ #define CFG_NIOS_TMRMS 10 /* 10 msec per tick */ #define CFG_NIOS_TMRCNT (CFG_NIOS_TMRMS * (CONFIG_SYS_CLK_FREQ/1000)) @@ -137,7 +137,7 @@ * must implement its own led routines -- leds are, after all, * board-specific, no? *----------------------------------------------------------------------*/ -#define CFG_LEDPIO_ADDR 0x00920840 /* LED PIO base addr */ +#define CFG_LEDPIO_ADDR 0x02120870 /* LED PIO base addr */ #define CONFIG_STATUS_LED /* Enable status driver */ #define STATUS_LED_BIT 1 /* Bit-0 on PIO */ @@ -150,7 +150,7 @@ * way out to avoid changes there -- define the base address to ensure * cache bypass so there's no need to monkey with inx/outx macros. *----------------------------------------------------------------------*/ -#define CONFIG_SMC91111_BASE 0x80910300 /* Base addr (bypass) */ +#define CONFIG_SMC91111_BASE 0x82110300 /* Base addr (bypass) */ #define CONFIG_DRIVER_SMC91111 /* Using SMC91c111 */ #undef CONFIG_SMC91111_EXT_PHY /* Internal PHY */ #define CONFIG_SMC_USE_32_BIT /* 32-bit interface */ diff --git a/include/configs/PLU405.h b/include/configs/PLU405.h index 54ecfa4c5e..dd5d831680 100644 --- a/include/configs/PLU405.h +++ b/include/configs/PLU405.h @@ -160,6 +160,8 @@ * NAND-FLASH stuff *----------------------------------------------------------------------- */ +#define CFG_NAND_LEGACY + #define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ #define SECTORSIZE 512 diff --git a/include/configs/PM520.h b/include/configs/PM520.h index 9f1dec82b8..9c241e67e7 100644 --- a/include/configs/PM520.h +++ b/include/configs/PM520.h @@ -101,6 +101,8 @@ #define ADD_DOC_CMD 0 #else #define ADD_DOC_CMD CFG_CMD_DOC +/* DoC requires legacy NAND for now */ +#define CFG_NAND_LEGACY #endif /* @@ -200,12 +202,13 @@ * Flash configuration (8,16 or 32 MB) * TEXT base always at 0xFFF00000 * ENV_ADDR always at 0xFFF40000 - * FLASH_BASE at 0xFC000000 for 32 MB + * FLASH_BASE at 0xFA000000 for 64 MB + * 0xFC000000 for 32 MB * 0xFD000000 for 16 MB * 0xFD800000 for 8 MB */ -#define CFG_FLASH_BASE 0xfc000000 -#define CFG_FLASH_SIZE 0x02000000 +#define CFG_FLASH_BASE 0xFA000000 +#define CFG_FLASH_SIZE 0x04000000 #define CFG_BOOTROM_BASE 0xFFF00000 #define CFG_BOOTROM_SIZE 0x00080000 #define CFG_ENV_ADDR (0xFDF00000 + 0x40000) @@ -214,17 +217,18 @@ * Flash configuration (8,16 or 32 MB) * TEXT base always at 0xFFF00000 * ENV_ADDR always at 0xFFF40000 - * FLASH_BASE at 0xFE000000 for 32 MB + * FLASH_BASE at 0xFC000000 for 64 MB + * 0xFE000000 for 32 MB * 0xFF000000 for 16 MB * 0xFF800000 for 8 MB */ -#define CFG_FLASH_BASE 0xfe000000 -#define CFG_FLASH_SIZE 0x02000000 +#define CFG_FLASH_BASE 0xFC000000 +#define CFG_FLASH_SIZE 0x04000000 #define CFG_ENV_ADDR (0xFFF00000 + 0x40000) #endif #define CFG_MAX_FLASH_BANKS 1 /* max num of memory banks */ -#define CFG_MAX_FLASH_SECT 128 /* max num of sects on one chip */ +#define CFG_MAX_FLASH_SECT 256 /* max num of sects on one chip */ #define CFG_FLASH_ERASE_TOUT 240000 /* Flash Erase Timeout (in ms) */ #define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */ @@ -325,11 +329,11 @@ #define CFG_CS0_SIZE CFG_BOOTROM_SIZE #define CFG_CS1_START CFG_FLASH_BASE #define CFG_CS1_SIZE CFG_FLASH_SIZE -#define CFG_CS1_CFG 0x0004fb00 +#define CFG_CS1_CFG 0x0004FF00 #else #define CFG_BOOTCS_START CFG_FLASH_BASE #define CFG_BOOTCS_SIZE CFG_FLASH_SIZE -#define CFG_BOOTCS_CFG 0x0004fb00 +#define CFG_BOOTCS_CFG 0x0004FF00 #define CFG_CS0_START CFG_FLASH_BASE #define CFG_CS0_SIZE CFG_FLASH_SIZE #define CFG_CS1_START CFG_DOC_BASE diff --git a/include/configs/PM826.h b/include/configs/PM826.h index 6e5e3bbe18..88fdb51ade 100644 --- a/include/configs/PM826.h +++ b/include/configs/PM826.h @@ -180,6 +180,8 @@ /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ #include <cmd_confdefs.h> +#define CFG_NAND_LEGACY + /* * Disk-On-Chip configuration */ diff --git a/include/configs/PM828.h b/include/configs/PM828.h index 982a1f8143..37ee9771b5 100644 --- a/include/configs/PM828.h +++ b/include/configs/PM828.h @@ -183,6 +183,7 @@ /* * Disk-On-Chip configuration */ +#define CFG_NAND_LEGACY #define CFG_DOC_SHORT_TIMEOUT #define CFG_MAX_DOC_DEVICE 1 /* Max number of DOC devices */ diff --git a/include/configs/PMC405.h b/include/configs/PMC405.h index 8bcab0b0f3..6e0bd7f23e 100644 --- a/include/configs/PMC405.h +++ b/include/configs/PMC405.h @@ -53,9 +53,15 @@ #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ +#define CONFIG_NET_MULTI 1 +#undef CONFIG_HAS_ETH1 + #define CONFIG_MII 1 /* MII PHY management */ #define CONFIG_PHY_ADDR 0 /* PHY address */ #define CONFIG_LXT971_NO_SLEEP 1 /* disable sleep mode in LXT971 */ +#define CONFIG_RESET_PHY_R 1 /* use reset_phy() to disable phy sleep mode */ + +#define CONFIG_NETCONSOLE /* include NetConsole support */ #define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ CFG_CMD_BSP | \ @@ -154,15 +160,24 @@ #define CONFIG_PCI_BOOTDELAY 0 /* enable pci bootdelay variable*/ #define CFG_PCI_SUBSYS_VENDORID 0x12FE /* PCI Vendor ID: esd gmbh */ -#define CFG_PCI_SUBSYS_DEVICEID 0x0408 /* PCI Device ID: PMC-405 */ +#define CFG_PCI_SUBSYS_DEVICEID_NONMONARCH 0x0408 /* PCI Device ID: Non-Monarch */ +#define CFG_PCI_SUBSYS_DEVICEID_MONARCH 0x0409 /* PCI Device ID: Monarch */ +#define CFG_PCI_SUBSYS_DEVICEID pmc405_pci_subsys_deviceid() + #define CFG_PCI_CLASSCODE 0x0b20 /* PCI Class Code: Processor/PPC*/ -#define CFG_PCI_PTM1LA 0x00000000 /* point to sdram */ -#define CFG_PCI_PTM1MS 0xfc000001 /* 64MB, enable hard-wired to 1 */ + +#define CFG_PCI_PTM1LA (bd->bi_memstart) /* point to sdram */ +#define CFG_PCI_PTM1MS (~(bd->bi_memsize - 1) | 1) /* memsize, enable hard-wired to 1 */ #define CFG_PCI_PTM1PCI 0x00000000 /* Host: use this pci address */ +#if 1 +#define CFG_PCI_PTM2LA 0xef000000 /* point to internal regs */ +#define CFG_PCI_PTM2MS 0xff000001 /* 16MB, enable */ +#define CFG_PCI_PTM2PCI 0x00000000 /* Host: use this pci address */ +#else /* old mapping */ #define CFG_PCI_PTM2LA 0xffc00000 /* point to flash */ #define CFG_PCI_PTM2MS 0xffc00001 /* 4MB, enable */ #define CFG_PCI_PTM2PCI 0x04000000 /* Host: use this pci address */ - +#endif /*----------------------------------------------------------------------- * Start addresses for the final memory configuration * (Set up by the startup code) @@ -259,7 +274,7 @@ #define FLASH1_BA 0xFE000000 /* FLASH 1 Base Address */ #define CAN_BA 0xF0000000 /* CAN Base Address */ #define RTC_BA 0xF0000500 /* RTC Base Address */ -#define CF_BA 0xF0100000 /* CompactFlash Base Address */ +#define NVRAM_BA 0xF0200000 /* NVRAM Base Address */ /* Memory Bank 0 (Flash Bank 0) initialization */ #define CFG_EBC_PB0AP 0x92015480 @@ -273,9 +288,11 @@ #define CFG_EBC_PB2AP 0x03000440 /* TWT=5,TH=2,CSN=0,OEN=0,WBN=0,WBF=0 */ #define CFG_EBC_PB2CR CAN_BA | 0x18000 /* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit */ -/* Memory Bank 3 (CompactFlash IDE, FPGA internal) initialization */ -#define CFG_EBC_PB3AP 0x010059C0 /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */ -#define CFG_EBC_PB3CR CF_BA | 0x1A000 /* BAS=0xF01,BS=1MB,BU=R/W,BW=16bit */ +/* Memory Bank 3 -> unused */ + +/* Memory Bank 4 (NVRAM) initialization */ +#define CFG_EBC_PB4AP 0x03000440 /* TWT=5,TH=2,CSN=0,OEN=0,WBN=0,WBF=0 */ +#define CFG_EBC_PB4CR NVRAM_BA | 0x18000 /* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit */ /*----------------------------------------------------------------------- * FPGA stuff @@ -293,6 +310,15 @@ #define CFG_VXWORKS_MAC_PTR 0x00000000 /* Pass Ethernet MAC to VxWorks */ /*----------------------------------------------------------------------- + * GPIOs + */ +#define CFG_NONMONARCH (0x80000000 >> 14) /* GPIO24 */ +#define CFG_XEREADY (0x80000000 >> 15) /* GPIO15 */ +#define CFG_INTA_FAKE (0x80000000 >> 19) /* GPIO19 */ +#define CFG_SELF_RST (0x80000000 >> 21) /* GPIO21 */ +#define CFG_REV1_2 (0x80000000 >> 23) /* GPIO23 */ + +/*----------------------------------------------------------------------- * Definitions for initial stack pointer and data area (in data cache) */ diff --git a/include/configs/PPChameleonEVB.h b/include/configs/PPChameleonEVB.h index 7ca827fa4b..16e2cc6d64 100644 --- a/include/configs/PPChameleonEVB.h +++ b/include/configs/PPChameleonEVB.h @@ -139,8 +139,18 @@ #define CFG_I2C_RTC_ADDR 0x68 #define CFG_M41T11_BASE_YEAR 1900 +/* + * SDRAM configuration (please see cpu/ppc/sdram.[ch]) + */ #define CONFIG_SDRAM_BANK0 1 /* init onboard SDRAM bank 0 */ +/* SDRAM timings used in datasheet */ +#define CFG_SDRAM_CL 2 +#define CFG_SDRAM_tRP 20 +#define CFG_SDRAM_tRC 65 +#define CFG_SDRAM_tRCD 20 +#undef CFG_SDRAM_tRFC + /* * Miscellaneous configurable options */ @@ -188,34 +198,34 @@ * NAND-FLASH stuff *----------------------------------------------------------------------- */ +/* + * nand device 1 on dave (PPChameleonEVB) needs more time, + * so we just introduce additional wait in nand_wait(), + * effectively for both devices. + */ +#define PPCHAMELON_NAND_TIMER_HACK + #define CFG_NAND0_BASE 0xFF400000 #define CFG_NAND1_BASE 0xFF000000 +#define CFG_NAND_BASE_LIST { CFG_NAND0_BASE, CFG_NAND1_BASE } +#define NAND_BIG_DELAY_US 25 +#define CFG_MAX_NAND_DEVICE 2 /* Max number of NAND devices */ -#define CFG_MAX_NAND_DEVICE 2 /* Max number of NAND devices */ -#define SECTORSIZE 512 -#define NAND_NO_RB - -#define ADDR_COLUMN 1 -#define ADDR_PAGE 2 -#define ADDR_COLUMN_PAGE 3 - -#define NAND_ChipID_UNKNOWN 0x00 -#define NAND_MAX_FLOORS 1 #define NAND_MAX_CHIPS 1 #define CFG_NAND0_CE (0x80000000 >> 1) /* our CE is GPIO1 */ +#define CFG_NAND0_RDY (0x80000000 >> 4) /* our RDY is GPIO4 */ #define CFG_NAND0_CLE (0x80000000 >> 2) /* our CLE is GPIO2 */ #define CFG_NAND0_ALE (0x80000000 >> 3) /* our ALE is GPIO3 */ -#define CFG_NAND0_RDY (0x80000000 >> 4) /* our RDY is GPIO4 */ #define CFG_NAND1_CE (0x80000000 >> 14) /* our CE is GPIO14 */ +#define CFG_NAND1_RDY (0x80000000 >> 31) /* our RDY is GPIO31 */ #define CFG_NAND1_CLE (0x80000000 >> 15) /* our CLE is GPIO15 */ #define CFG_NAND1_ALE (0x80000000 >> 16) /* our ALE is GPIO16 */ -#define CFG_NAND1_RDY (0x80000000 >> 31) /* our RDY is GPIO31 */ -#define NAND_DISABLE_CE(nand) do \ +#define MACRO_NAND_DISABLE_CE(nandptr) do \ { \ - switch((unsigned long)(((struct nand_chip *)nand)->IO_ADDR)) \ + switch((unsigned long)nandptr) \ { \ case CFG_NAND0_BASE: \ out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND0_CE); \ @@ -226,9 +236,9 @@ } \ } while(0) -#define NAND_ENABLE_CE(nand) do \ +#define MACRO_NAND_ENABLE_CE(nandptr) do \ { \ - switch((unsigned long)(((struct nand_chip *)nand)->IO_ADDR)) \ + switch((unsigned long)nandptr) \ { \ case CFG_NAND0_BASE: \ out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND0_CE); \ @@ -239,7 +249,7 @@ } \ } while(0) -#define NAND_CTL_CLRALE(nandptr) do \ +#define MACRO_NAND_CTL_CLRALE(nandptr) do \ { \ switch((unsigned long)nandptr) \ { \ @@ -252,7 +262,7 @@ } \ } while(0) -#define NAND_CTL_SETALE(nandptr) do \ +#define MACRO_NAND_CTL_SETALE(nandptr) do \ { \ switch((unsigned long)nandptr) \ { \ @@ -265,7 +275,7 @@ } \ } while(0) -#define NAND_CTL_CLRCLE(nandptr) do \ +#define MACRO_NAND_CTL_CLRCLE(nandptr) do \ { \ switch((unsigned long)nandptr) \ { \ @@ -278,7 +288,7 @@ } \ } while(0) -#define NAND_CTL_SETCLE(nandptr) do { \ +#define MACRO_NAND_CTL_SETCLE(nandptr) do { \ switch((unsigned long)nandptr) { \ case CFG_NAND0_BASE: \ out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND0_CLE); \ @@ -289,6 +299,17 @@ } \ } while(0) +#if 0 +#define SECTORSIZE 512 +#define NAND_NO_RB + +#define ADDR_COLUMN 1 +#define ADDR_PAGE 2 +#define ADDR_COLUMN_PAGE 3 + +#define NAND_ChipID_UNKNOWN 0x00 +#define NAND_MAX_FLOORS 1 + #ifdef NAND_NO_RB /* constant delay (see also tR in the datasheet) */ #define NAND_WAIT_READY(nand) do { \ @@ -303,7 +324,7 @@ #define WRITE_NAND_ADDRESS(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)(d); } while(0) #define WRITE_NAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)d; } while(0) #define READ_NAND(adr) ((volatile unsigned char)(*(volatile __u8 *)(unsigned long)adr)) - +#endif /*----------------------------------------------------------------------- * PCI stuff *----------------------------------------------------------------------- @@ -338,16 +359,16 @@ #define CFG_SDRAM_BASE 0x00000000 /* Reserve 256 kB for Monitor */ +/* #define CFG_FLASH_BASE 0xFFFC0000 #define CFG_MONITOR_BASE CFG_FLASH_BASE #define CFG_MONITOR_LEN (256 * 1024) +*/ /* Reserve 320 kB for Monitor */ -/* #define CFG_FLASH_BASE 0xFFFB0000 #define CFG_MONITOR_BASE CFG_FLASH_BASE #define CFG_MONITOR_LEN (320 * 1024) -*/ #define CFG_MALLOC_LEN (256 * 1024) /* Reserve 256 kB for malloc() */ diff --git a/include/configs/RPXlite.h b/include/configs/RPXlite.h index 6b65031099..48ada0ed9b 100644 --- a/include/configs/RPXlite.h +++ b/include/configs/RPXlite.h @@ -21,10 +21,6 @@ * MA 02111-1307 USA */ -/* - * board/config.h - configuration options, board specific - */ - /* Yoo. Jonghoon, IPone, yooth@ipone.co.kr * U-Boot port on RPXlite board */ @@ -53,8 +49,6 @@ #define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ #endif -#define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */ - #undef CONFIG_BOOTARGS #define CONFIG_BOOTCOMMAND \ "bootp; " \ @@ -65,6 +59,7 @@ #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #undef CFG_LOADS_BAUD_CHANGE /* don't allow baudrate change */ +#define CONFIG_BZIP2 /* Include support for bzip2 compressed images */ #undef CONFIG_WATCHDOG /* watchdog disabled */ #define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) @@ -86,12 +81,14 @@ #define CFG_MAXARGS 16 /* max number of command args */ #define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ -#define CFG_MEMTEST_START 0x0040000 /* memtest works on */ -#define CFG_MEMTEST_END 0x00C0000 /* 4 ... 12 MB in DRAM */ +#define CFG_MEMTEST_START 0x00400000 /* memtest works on */ +#define CFG_MEMTEST_END 0x00C00000 /* 4 ... 12 MB in DRAM */ -#define CFG_LOAD_ADDR 0x100000 /* default load address */ +#define CFG_RESET_ADDRESS 0x09900000 -#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ +#define CFG_LOAD_ADDR 0x400000 /* default load address */ + +#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ #define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } @@ -120,16 +117,14 @@ * Please note that CFG_SDRAM_BASE _must_ start at 0 */ #define CFG_SDRAM_BASE 0x00000000 -#define CFG_FLASH_BASE 0xFFC00000 -/*%%% #define CFG_FLASH_BASE 0xFFF00000 */ -#if defined(DEBUG) || (CONFIG_COMMANDS & CFG_CMD_IDE) +#define CFG_FLASH_BASE 0xFFC00000 +#define CFG_MONITOR_BASE TEXT_BASE #define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ +#ifdef CONFIG_BZIP2 +#define CFG_MALLOC_LEN (4096 << 10) /* Reserve ~4 MB for malloc() */ #else -#define CFG_MONITOR_LEN (128 << 10) /* Reserve 128 kB for Monitor */ -#endif -#define CFG_MONITOR_BASE 0xFFF00000 -/*%%% #define CFG_MONITOR_BASE CFG_FLASH_BASE */ -#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ +#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 KB for malloc() */ +#endif /* CONFIG_BZIP2 */ /* * For booting Linux, the board info and command line data @@ -147,9 +142,13 @@ #define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ #define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ +#define CFG_DIRECT_FLASH_TFTP + #define CFG_ENV_IS_IN_FLASH 1 -#define CFG_ENV_OFFSET 0x8000 /* Offset of Environment Sector */ -#define CFG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */ +#define CFG_ENV_SECT_SIZE 0x40000 /* We use one complete sector */ +#define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN) + +#define CONFIG_ENV_OVERWRITE /*----------------------------------------------------------------------- * Cache Configuration @@ -352,12 +351,12 @@ #define BCSR0_ENMONXCVR 0x01 /* Monitor XVCR Control */ #define BCSR0_ENNVRAM 0x02 /* CS4# Control */ -#define BCSR0_LED5 0x04 /* LED5 control 0='on' 1='off' */ -#define BCSR0_LED4 0x08 /* LED4 control 0='on' 1='off' */ +#define BCSR0_LED5 0x04 /* LED5 control 0='on' 1='off' */ +#define BCSR0_LED4 0x08 /* LED4 control 0='on' 1='off' */ #define BCSR0_FULLDPLX 0x10 /* Ethernet XCVR Control */ #define BCSR0_COLTEST 0x20 #define BCSR0_ETHLPBK 0x40 -#define BCSR0_ETHEN 0x80 +#define BCSR0_ETHEN 0x80 #define BCSR1_PCVCTL7 0x01 /* PC Slot B Control */ #define BCSR1_PCVCTL6 0x02 @@ -371,22 +370,13 @@ #define BCSR2_USBSPD 0x40 #define BCSR2_USBSUSP 0x80 -#define BCSR3_BWRTC 0x01 /* Real Time Clock Battery */ -#define BCSR3_BWNVR 0x02 /* NVRAM Battery */ +#define BCSR3_BWRTC 0x01 /* Real Time Clock Battery */ +#define BCSR3_BWNVR 0x02 /* NVRAM Battery */ #define BCSR3_RDY_BSY 0x04 /* Flash Operation */ -#define BCSR3_RPXL 0x08 /* Reserved (reads back '1') */ -#define BCSR3_D27 0x10 /* Dip Switch settings */ -#define BCSR3_D26 0x20 -#define BCSR3_D25 0x40 -#define BCSR3_D24 0x80 - - -/* - * Environment setting - */ - -#define CONFIG_ETHADDR 00:10:EC:00:1D:0B -#define CONFIG_IPADDR 192.168.1.65 -#define CONFIG_SERVERIP 192.168.1.27 +#define BCSR3_RPXL 0x08 /* Reserved (reads back '1') */ +#define BCSR3_D27 0x10 /* Dip Switch settings */ +#define BCSR3_D26 0x20 +#define BCSR3_D25 0x40 +#define BCSR3_D24 0x80 #endif /* __CONFIG_H */ diff --git a/include/configs/RPXlite_DW.h b/include/configs/RPXlite_DW.h index 8cd7df1ecf..31025473f4 100644 --- a/include/configs/RPXlite_DW.h +++ b/include/configs/RPXlite_DW.h @@ -45,7 +45,7 @@ */ /* #define DEBUG 1 */ -/* #ifdef DEPLOYMENT 1 */ +/* #define DEPLOYMENT 1 */ #undef CONFIG_MPC860 #define CONFIG_MPC823 1 /* This is a MPC823e CPU. */ @@ -61,23 +61,23 @@ #define CONFIG_BAUDRATE 9600 /* console default baudrate = 9600bps */ #ifdef DEBUG -#define CONFIG_BOOTDELAY -1 /* autoboot disabled */ +#define CONFIG_BOOTDELAY -1 /* autoboot disabled */ #else -#define CONFIG_BOOTDELAY 6 /* autoboot after 6 seconds */ +#define CONFIG_BOOTDELAY 6 /* autoboot after 6 seconds */ #ifdef DEPLOYMENT -#define CONFIG_BOOT_RETRY_TIME -1 +#define CONFIG_BOOT_RETRY_TIME -1 #define CONFIG_AUTOBOOT_KEYED -#define CONFIG_AUTOBOOT_PROMPT "autoboot in %d seconds (stop with 'st')...\n" -#define CONFIG_AUTOBOOT_STOP_STR "st" +#define CONFIG_AUTOBOOT_PROMPT "autoboot in %d seconds (stop with 'st')...\n" +#define CONFIG_AUTOBOOT_STOP_STR "st" #define CONFIG_ZERO_BOOTDELAY_CHECK -#define CONFIG_RESET_TO_RETRY 1 -#define CONFIG_BOOT_RETRY_MIN 1 +#define CONFIG_RESET_TO_RETRY 1 +#define CONFIG_BOOT_RETRY_MIN 1 #endif /* DEPLOYMENT */ #endif /* DEBUG */ /* pre-boot commands */ -#define CONFIG_PREBOOT "setenv stdout serial;setenv stdin serial" +#define CONFIG_PREBOOT "setenv stdout serial;setenv stdin serial" #undef CONFIG_BOOTARGS #define CONFIG_EXTRA_ENV_SETTINGS \ @@ -117,6 +117,36 @@ #define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) +#if 1 /* Enable this stuff could make image enlarge about 25KB. Mask it if you + don't want the advanced function */ + +#ifdef CONFIG_SPLASH_SCREEN +#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ + CFG_CMD_ASKENV | \ + CFG_CMD_BMP | \ + CFG_CMD_JFFS2 | \ + CFG_CMD_PING | \ + CFG_CMD_ELF | \ + CFG_CMD_REGINFO | \ + CFG_CMD_DHCP ) +#else +#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ + CFG_CMD_ASKENV | \ + CFG_CMD_JFFS2 | \ + CFG_CMD_PING | \ + CFG_CMD_ELF | \ + CFG_CMD_REGINFO | \ + CFG_CMD_DHCP ) +#endif /* CONFIG_SPLASH_SCREEN */ + +/* test-only */ +#define CFG_JFFS2_FIRST_BANK 0 /* use for JFFS2 */ +#define CFG_JFFS2_NUM_BANKS 1 /* ! second bank contains U-Boot */ + +#define CONFIG_NETCONSOLE + +#endif /* 1 */ + /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ #include <cmd_confdefs.h> @@ -280,7 +310,7 @@ #if defined(RPXlite_64MHz) #define CFG_SCCR ( SCCR_TBS | SCCR_EBDF01 ) /* %%%SCCR:0x02020000 */ #else -#define CFG_SCCR ( SCCR_TBS | SCCR_EBDF00 ) /* %%%SCCR:0x02000000 */ +#define CFG_SCCR ( SCCR_TBS | SCCR_EBDF00 ) /* %%%SCCR:0x02000000 */ #endif /*----------------------------------------------------------------------- @@ -446,5 +476,6 @@ #define CONFIG_SERVERIP 172.16.115.6 #define CONFIG_ROOTPATH /workspace/myfilesystem/target/ #define CONFIG_BOOTFILE uImage.rpxusb +#define CONFIG_HOSTNAME LITE_H1_DW #endif /* __CONFIG_H */ diff --git a/include/configs/RPXsuper.h b/include/configs/RPXsuper.h index 6ae9403c46..45907aa0e7 100644 --- a/include/configs/RPXsuper.h +++ b/include/configs/RPXsuper.h @@ -154,7 +154,6 @@ #define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ CFG_CMD_IMMAP | \ CFG_CMD_ASKENV | \ - CFG_CMD_ECHO | \ CFG_CMD_I2C | \ CFG_CMD_REGINFO & \ ~CFG_CMD_KGDB ) diff --git a/include/configs/Rattler.h b/include/configs/Rattler.h index a170f290e0..dbc57e8b27 100644 --- a/include/configs/Rattler.h +++ b/include/configs/Rattler.h @@ -127,7 +127,6 @@ #define CONFIG_COMMANDS (CONFIG_CMD_DFL \ | CFG_CMD_DHCP \ - | CFG_CMD_ECHO \ | CFG_CMD_IMMAP \ | CFG_CMD_JFFS2 \ | CFG_CMD_MII \ diff --git a/include/configs/SXNI855T.h b/include/configs/SXNI855T.h index c1c765f39d..a8454d99fc 100644 --- a/include/configs/SXNI855T.h +++ b/include/configs/SXNI855T.h @@ -183,6 +183,7 @@ */ /* NAND flash support */ +#define CFG_NAND_LEGACY #define CONFIG_MTD_NAND_ECC_JFFS2 #define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ #define SECTORSIZE 512 diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h index 5ad1939481..6b8759f2b5 100644 --- a/include/configs/TQM5200.h +++ b/include/configs/TQM5200.h @@ -37,7 +37,6 @@ #define CONFIG_TQM5200 1 /* ... on TQM5200 module */ #undef CONFIG_TQM5200_REV100 /* define for revision 100 modules */ #define CONFIG_STK52XX 1 /* ... on a STK52XX base board */ -#define CONFIG_STK52XX_REV100 1 /* define for revision 100 baseboards */ #define CFG_MPC5XXX_CLKIN 33000000 /* ... running at 33.000000MHz */ @@ -83,7 +82,7 @@ #define CONFIG_PCI_IO_SIZE 0x01000000 #define CONFIG_NET_MULTI 1 -#define CONFIG_EEPRO100 +#define CONFIG_EEPRO100 1 #define CFG_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */ #define CONFIG_NS8382X 1 #endif /* CONFIG_STK52XX */ @@ -161,7 +160,6 @@ CFG_CMD_ASKENV | \ CFG_CMD_DATE | \ CFG_CMD_DHCP | \ - CFG_CMD_ECHO | \ CFG_CMD_EEPROM | \ CFG_CMD_I2C | \ CFG_CMD_JFFS2 | \ @@ -193,16 +191,6 @@ #undef CONFIG_BOOTARGS -#if defined (CONFIG_TQM5200_AA) -# define CONFIG_U_BOOT_SUFFIX "-AA\0" -#elif defined (CONFIG_TQM5200_AB) -# define CONFIG_U_BOOT_SUFFIX "-AB\0" -#elif defined (CONFIG_TQM5200_AC) -# define CONFIG_U_BOOT_SUFFIX "-AC\0" -#else -# define CONFIG_U_BOOT_SUFFIX "\0" -#endif - #define CONFIG_EXTRA_ENV_SETTINGS \ "netdev=eth0\0" \ "rootpath=/opt/eldk/ppc_6xx\0" \ @@ -219,7 +207,7 @@ "net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \ "bootfile=/tftpboot/tqm5200/uImage\0" \ "load=tftp 200000 ${u-boot}\0" \ - "u-boot=/tftpboot/tqm5200/u-boot.bin" CONFIG_U_BOOT_SUFFIX \ + "u-boot=/tftpboot/tqm5200/u-boot.bin\0" \ "update=protect off FC000000 FC05FFFF;" \ "erase FC000000 FC05FFFF;" \ "cp.b 200000 FC000000 ${filesize};" \ @@ -285,13 +273,6 @@ #endif /* List of I2C addresses to be verified by POST */ -#if defined (CONFIG_TQM5200_AA) || defined (CONFIG_TQM5200_AB) -#define I2C_ADDR_LIST { CFG_I2C_EEPROM_ADDR, \ - CFG_I2C_SLAVE } -#elif defined (CONFIG_TQM5200_AC) -#define I2C_ADDR_LIST { CFG_I2C_SLAVE } -#endif - #if defined (CONFIG_MINIFAP) #undef I2C_ADDR_LIST #define I2C_ADDR_LIST { CFG_I2C_EEPROM_ADDR, \ @@ -494,13 +475,9 @@ * SRAM - Do not map below 2 GB in address space, because this area is used * for SDRAM autosizing. */ -#if defined CONFIG_TQM5200_AB || defined (CONFIG_CS_AUTOCONF) +#if defined (CONFIG_CS_AUTOCONF) #define CFG_CS2_START 0xE5000000 -#ifdef CONFIG_TQM5200_AB -#define CFG_CS2_SIZE 0x80000 /* 512 kByte */ -#else /* CONFIG_CS_AUTOCONF */ #define CFG_CS2_SIZE 0x100000 /* 1 MByte */ -#endif #define CFG_CS2_CFG 0x0004D930 #endif @@ -508,8 +485,7 @@ * Grafic controller - Do not map below 2 GB in address space, because this * area is used for SDRAM autosizing. */ -#if defined (CONFIG_TQM5200_AB) || defined (CONFIG_TQM5200_AC) || \ - defined (CONFIG_CS_AUTOCONF) +#if defined (CONFIG_CS_AUTOCONF) #define SM501_FB_BASE 0xE0000000 #define CFG_CS1_START (SM501_FB_BASE) #define CFG_CS1_SIZE 0x4000000 /* 64 MByte */ diff --git a/include/configs/TQM834x.h b/include/configs/TQM834x.h index 41f44c5a37..cec7e3ece4 100644 --- a/include/configs/TQM834x.h +++ b/include/configs/TQM834x.h @@ -417,11 +417,58 @@ extern int tqm834x_num_flash_banks; HRCWH_TSEC2M_IN_GMII ) #endif +/* System IO Config */ +#define CFG_SICRH SICRH_TSOBI1 +#define CFG_SICRL SICRL_LDP_A + /* i-cache and d-cache disabled */ #define CFG_HID0_INIT 0x000000000 #define CFG_HID0_FINAL CFG_HID0_INIT #define CFG_HID2 0x000000000 +/* DDR 0 - 512M */ +#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) +#define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) +#define CFG_IBAT1L (CFG_SDRAM_BASE + 0x10000000 | BATL_PP_10 | BATL_MEMCOHERENCE) +#define CFG_IBAT1U (CFG_SDRAM_BASE + 0x10000000 | BATU_BL_256M | BATU_VS | BATU_VP) + +/* stack in DCACHE @ 512M (no backing mem) */ +#define CFG_IBAT2L (CFG_INIT_RAM_ADDR | BATL_PP_10 | BATL_MEMCOHERENCE) +#define CFG_IBAT2U (CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP) + +/* PCI */ +#define CFG_IBAT3L (CFG_PCI1_MEM_BASE | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CFG_IBAT3U (CFG_PCI1_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) +#define CFG_IBAT4L (CFG_PCI1_MEM_BASE + 0x10000000 | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CFG_IBAT4U (CFG_PCI1_MEM_BASE + 0x10000000 | BATU_BL_256M | BATU_VS | BATU_VP) +#define CFG_IBAT5L (CFG_PCI1_IO_BASE | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CFG_IBAT5U (CFG_PCI1_IO_BASE + 0x10000000 | BATU_BL_16M | BATU_VS | BATU_VP) + +/* IMMRBAR */ +#define CFG_IBAT6L (CFG_IMMRBAR | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CFG_IBAT6U (CFG_IMMRBAR | BATU_BL_1M | BATU_VS | BATU_VP) + +/* FLASH */ +#define CFG_IBAT7L (CFG_FLASH_BASE | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CFG_IBAT7U (CFG_FLASH_BASE | BATU_BL_256M | BATU_VS | BATU_VP) + +#define CFG_DBAT0L CFG_IBAT0L +#define CFG_DBAT0U CFG_IBAT0U +#define CFG_DBAT1L CFG_IBAT1L +#define CFG_DBAT1U CFG_IBAT1U +#define CFG_DBAT2L CFG_IBAT2L +#define CFG_DBAT2U CFG_IBAT2U +#define CFG_DBAT3L CFG_IBAT3L +#define CFG_DBAT3U CFG_IBAT3U +#define CFG_DBAT4L CFG_IBAT4L +#define CFG_DBAT4U CFG_IBAT4U +#define CFG_DBAT5L CFG_IBAT5L +#define CFG_DBAT5U CFG_IBAT5U +#define CFG_DBAT6L CFG_IBAT6L +#define CFG_DBAT6U CFG_IBAT6U +#define CFG_DBAT7L CFG_IBAT7L +#define CFG_DBAT7U CFG_IBAT7U + /* * Internal Definitions * diff --git a/include/configs/TQM85xx.h b/include/configs/TQM85xx.h index 18197f234d..da6946bd5b 100644 --- a/include/configs/TQM85xx.h +++ b/include/configs/TQM85xx.h @@ -177,6 +177,13 @@ #define CFG_BAUDRATE_TABLE \ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200} +/* PS/2 Keyboard */ +#define CONFIG_PS2KBD /* AT-PS/2 Keyboard */ +#define CONFIG_PS2MULT /* .. on PS/2 Multiplexer */ +#define CONFIG_PS2SERIAL 2 /* .. on DUART2 */ +#define CONFIG_PS2MULT_DELAY (CFG_HZ/2) /* Initial delay */ +#define CONFIG_BOARD_EARLY_INIT_R 1 + /* Use the HUSH parser */ #define CFG_HUSH_PARSER #ifdef CFG_HUSH_PARSER diff --git a/include/configs/VCMA9.h b/include/configs/VCMA9.h index 3f29190e43..5f48a70938 100644 --- a/include/configs/VCMA9.h +++ b/include/configs/VCMA9.h @@ -248,6 +248,7 @@ */ #if (CONFIG_COMMANDS & CFG_CMD_NAND) +#define CFG_NAND_LEGACY #define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ #define SECTORSIZE 512 diff --git a/include/configs/VOH405.h b/include/configs/VOH405.h index 3ca137e53a..96f3d26cc5 100644 --- a/include/configs/VOH405.h +++ b/include/configs/VOH405.h @@ -141,6 +141,8 @@ * NAND-FLASH stuff *----------------------------------------------------------------------- */ +#define CFG_NAND_LEGACY + #define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ #define SECTORSIZE 512 diff --git a/include/configs/WUH405.h b/include/configs/WUH405.h index d92f81f78e..faf855d249 100644 --- a/include/configs/WUH405.h +++ b/include/configs/WUH405.h @@ -133,6 +133,8 @@ * NAND-FLASH stuff *----------------------------------------------------------------------- */ +#define CFG_NAND_LEGACY + #define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ #define SECTORSIZE 512 diff --git a/include/configs/ZPC1900.h b/include/configs/ZPC1900.h index f71e691b26..a5085cfb79 100644 --- a/include/configs/ZPC1900.h +++ b/include/configs/ZPC1900.h @@ -1,5 +1,5 @@ /* - * Copyright (C) 2003-2004 Arabella Software Ltd. + * Copyright (C) 2003-2005 Arabella Software Ltd. * Yuli Barcohen <yuli@arabellasw.com> * * U-Boot configuration for Zephyr Engineering ZPC.1900 board. @@ -32,11 +32,7 @@ #define CPU_ID_STR "MPC8265" #define CONFIG_CPM2 1 /* Has a CPM2 */ -#undef DEBUG - -#undef CONFIG_BOARD_EARLY_INIT_F /* Don't call board_early_init_f */ - -/* Allow serial number (serial) and MAC address (ethaddr) to be overwritten */ +/* Allow serial number (serial#) and MAC address (ethaddr) to be overwritten */ #define CONFIG_ENV_OVERWRITE /* @@ -113,7 +109,6 @@ #define CONFIG_COMMANDS (CONFIG_CMD_DFL \ | CFG_CMD_ASKENV \ | CFG_CMD_DHCP \ - | CFG_CMD_ECHO \ | CFG_CMD_IMMAP \ | CFG_CMD_MII \ | CFG_CMD_PING \ @@ -154,31 +149,30 @@ #define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ #define CFG_MEMTEST_START 0x00100000 /* memtest works on */ -#define CFG_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */ +#define CFG_MEMTEST_END 0x03800000 /* 1 ... 56 MB in DRAM */ -#define CFG_LOAD_ADDR 0x100000 /* default load address */ +#define CFG_LOAD_ADDR 0x400000 /* default load address */ #define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ #define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } -#define CFG_FLASH_BASE 0xFFE00000 -#define CFG_FLASH_CFI -#define CFG_FLASH_CFI_DRIVER -#define CFG_MAX_FLASH_BANKS 1 /* max num of flash banks */ -#define CFG_MAX_FLASH_SECT 32 /* max num of sects on one chip */ - -#define CFG_DEFAULT_IMMR 0x0F010000 - -#define CFG_IMMR 0xF0000000 #define CFG_SDRAM_BASE 0x00000000 #define CFG_SDRAM_SIZE 64 -#define CFG_FLSIMM_BASE 0xFC000000 -#define CFG_LSDRAM_BASE 0xFE000000 + +#define CFG_IMMR 0xF0000000 +#define CFG_LSDRAM_BASE 0xFC000000 +#define CFG_FLASH_BASE 0xFE000000 #define CFG_BCSR 0xFEA00000 #define CFG_EEPROM 0xFEB00000 +#define CFG_FLSIMM_BASE 0xFF000000 -#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE } +#define CFG_FLASH_CFI +#define CFG_FLASH_CFI_DRIVER +#define CFG_MAX_FLASH_BANKS 2 /* max num of flash banks */ +#define CFG_MAX_FLASH_SECT 32 /* max num of sects on one chip */ + +#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE, CFG_FLSIMM_BASE } #define BCSR_PCI_MODE 0x01 @@ -190,10 +184,10 @@ /* Hard reset configuration word */ #define CFG_HRCW_MASTER (HRCW_EBM | HRCW_BPS01| HRCW_CIP |\ - HRCW_L2CPC10 | HRCW_DPPC00 | HRCW_ISB010 |\ - HRCW_BMS | HRCW_LBPC01 | HRCW_APPC10 |\ - HRCW_MODCK_H0101 \ - ) /* 0x16828605 */ + HRCW_L2CPC10 | HRCW_DPPC00 | HRCW_ISB100 |\ + HRCW_BMS | HRCW_LBPC00 | HRCW_APPC10 |\ + HRCW_MODCK_H0111 \ + ) /* 0x16848207 */ /* No slaves */ #define CFG_HRCW_SLAVE1 0 #define CFG_HRCW_SLAVE2 0 @@ -211,7 +205,7 @@ #define CFG_RAMBOOT #endif -#define CFG_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */ +#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ #define CFG_MALLOC_LEN (4096 << 10) /* Reserve 4 MB for malloc() */ #define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ @@ -233,14 +227,14 @@ # define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif -#define CFG_HID0_INIT 0 -#define CFG_HID0_FINAL (HID0_ICE | HID0_IFEM | HID0_ABE ) +#define CFG_HID0_INIT (HID0_ICFI) +#define CFG_HID0_FINAL (HID0_ICE | HID0_IFEM | HID0_ABE) #define CFG_HID2 0 #define CFG_SIUMCR 0x42200000 #define CFG_SYPCR 0xFFFFFFC3 -#define CFG_BCR 0x90400000 +#define CFG_BCR 0x90000000 #define CFG_SCCR SCCR_DFBRG01 #define CFG_RMR RMR_CSRE @@ -248,18 +242,23 @@ #define CFG_PISCR (PISCR_PS|PISCR_PTF|PISCR_PTE) #define CFG_RCCR 0 -#define CFG_PSDMR 0x014EB45A -#define CFG_PSRT 0x0C -#define CFG_LSDMR 0x008AB552 -#define CFG_LSRT 0x0E +#define CFG_PSDMR /* 0x834DA43B */0x014DA43A +#define CFG_PSRT 0x0F/* 0x0C */ +#define CFG_LSDMR 0x0085A562 +#define CFG_LSRT 0x0F #define CFG_MPTPR 0x4000 +#define CFG_PSDRAM_BR CFG_SDRAM_BASE | 0x00000041 +#define CFG_PSDRAM_OR 0xFC0028C0 +#define CFG_LSDRAM_BR CFG_LSDRAM_BASE | 0x00001861 +#define CFG_LSDRAM_OR 0xFF803480 + #define CFG_BR0_PRELIM CFG_FLASH_BASE | 0x00000801 #define CFG_OR0_PRELIM 0xFFE00856 #define CFG_BR5_PRELIM CFG_EEPROM | 0x00000801 #define CFG_OR5_PRELIM 0xFFFF03F6 -#define CFG_BR6_PRELIM CFG_FLSIMM_BASE | 0x00000801 -#define CFG_OR6_PRELIM 0xFE000856 +#define CFG_BR6_PRELIM CFG_FLSIMM_BASE | 0x00001801 +#define CFG_OR6_PRELIM 0xFF000856 #define CFG_BR7_PRELIM CFG_BCSR | 0x00000801 #define CFG_OR7_PRELIM 0xFFFF83F6 diff --git a/include/configs/bamboo.h b/include/configs/bamboo.h index eacc74446c..6d3282150d 100644 --- a/include/configs/bamboo.h +++ b/include/configs/bamboo.h @@ -43,6 +43,7 @@ * 2nd ethernet port you have to "undef" the following define. */ #define CONFIG_BAMBOO_NAND 1 /* enable nand flash support */ +#define CFG_NAND_LEGACY /*----------------------------------------------------------------------- * Base addresses -- Note these are effective addresses where the diff --git a/include/configs/cmc_pu2.h b/include/configs/cmc_pu2.h index 46280f7e32..572a70f120 100644 --- a/include/configs/cmc_pu2.h +++ b/include/configs/cmc_pu2.h @@ -108,7 +108,7 @@ /* still about 20 kB free with this defined */ #define CFG_LONGHELP -#define CONFIG_BOOTDELAY 3 +#define CONFIG_BOOTDELAY 1 #ifdef CONFIG_HARD_I2C #define CONFIG_COMMANDS \ @@ -206,15 +206,6 @@ struct bd_info_ext { #error CONFIG_USE_IRQ not supported #endif -#define CFG_DEVICE_NULLDEV 1 /* enble null device */ -#define CONFIG_SILENT_CONSOLE 1 /* enable silent startup */ - -#define CONFIG_AUTOBOOT_KEYED -#define CONFIG_AUTOBOOT_PROMPT "autoboot in %d seconds\n" -#define CONFIG_AUTOBOOT_STOP_STR "R" /* default password */ - -#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */ - #define CONFIG_EXTRA_ENV_SETTINGS \ "net_nfs=tftp ${loadaddr} ${bootfile};run nfsargs addip addcons " \ "addmtd;bootm\0" \ diff --git a/include/configs/dbau1x00.h b/include/configs/dbau1x00.h index 0a10e3c75b..4cc5085293 100644 --- a/include/configs/dbau1x00.h +++ b/include/configs/dbau1x00.h @@ -81,8 +81,7 @@ CFG_CMD_MII | CFG_CMD_RUN | CFG_CMD_BDI | CFG_CMD_BEDBUG | \ CFG_CMD_NFS | CFG_CMD_ELF | CFG_CMD_PCMCIA | CFG_CMD_I2C)) #else /* CONFIG_DBAU1550 */ -/* Boot from Compact flash partition 2 as default */ -#define CONFIG_BOOTCOMMAND "ide reset;disk 0x81000000 0:2;bootm" +#define CONFIG_BOOTCOMMAND "bootp;bootm" #define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_IDE | CFG_CMD_DHCP | CFG_CMD_ELF) & \ ~(CFG_CMD_ENV | CFG_CMD_FAT | CFG_CMD_FLASH | CFG_CMD_FPGA | \ @@ -133,8 +132,6 @@ #define PHYS_FLASH_1 0xb8000000 /* Flash Bank #1 */ #define PHYS_FLASH_2 0xbc000000 /* Flash Bank #2 */ -#define CFG_FLASH_BANKS_LIST {PHYS_FLASH_1, PHYS_FLASH_2} - #else /* CONFIG_DBAU1550 */ #define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */ @@ -145,6 +142,8 @@ #endif /* CONFIG_DBAU1550 */ +#define CFG_FLASH_BANKS_LIST {PHYS_FLASH_1, PHYS_FLASH_2} + #define CFG_FLASH_CFI 1 #define CFG_FLASH_CFI_DRIVER 1 diff --git a/include/configs/delta.h b/include/configs/delta.h new file mode 100644 index 0000000000..91284fdace --- /dev/null +++ b/include/configs/delta.h @@ -0,0 +1,242 @@ +/* + * Configuation settings for the Delta board. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Configuration Options + * (easy to change) + */ +#define CONFIG_CPU_MONAHANS 1 /* Intel Monahan CPU */ +#define CONFIG_DELTA 1 /* Delta board */ + +/* #define CONFIG_LCD 1 */ +#ifdef CONFIG_LCD +#define CONFIG_SHARP_LM8V31 +#endif +/* #define CONFIG_MMC 1 */ +#define BOARD_LATE_INIT 1 + +#undef CONFIG_SKIP_RELOCATE_UBOOT +#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ + +/* + * Size of malloc() pool + */ +#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 256*1024) +#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ + +/* + * Hardware drivers + */ +#undef TURN_ON_ETHERNET +#ifdef TURN_ON_ETHERNET +# define CONFIG_DRIVER_SMC91111 1 +# define CONFIG_SMC91111_BASE 0x14000300 +# define CONFIG_SMC91111_EXT_PHY +# define CONFIG_SMC_USE_32_BIT +# undef CONFIG_SMC_USE_IOFUNCS /* just for use with the kernel */ +#endif + +#define CONFIG_HARD_I2C 1 /* required for DA9030 access */ +#define CFG_I2C_SPEED 400000 /* I2C speed */ +#define CFG_I2C_SLAVE 1 /* I2C controllers address */ +#define DA9030_I2C_ADDR 0x49 /* I2C address of DA9030 */ +#define CFG_DA9030_EXTON_DELAY 100000 /* wait x us after DA9030 reset via EXTON */ +#define CFG_I2C_INIT_BOARD 1 +/* #define CONFIG_HW_WATCHDOG 1 /\* Required for hitting the DA9030 WD *\/ */ + +#define DELTA_CHECK_KEYBD 1 /* check for keys pressed during boot */ +#define CONFIG_PREBOOT "\0" + +#ifdef DELTA_CHECK_KEYBD +# define KEYBD_DATALEN 4 /* we have four keys */ +# define KEYBD_KP_DKIN0 0x1 /* vol+ */ +# define KEYBD_KP_DKIN1 0x2 /* vol- */ +# define KEYBD_KP_DKIN2 0x3 /* multi */ +# define KEYBD_KP_DKIN5 0x4 /* SWKEY_GN */ +#endif /* DELTA_CHECK_KEYBD */ + +/* + * select serial console configuration + */ +#define CONFIG_FFUART 1 + +/* allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE + +#define CONFIG_BAUDRATE 115200 + +/* #define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_MMC | CFG_CMD_FAT) */ +#ifdef TURN_ON_ETHERNET +# define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_PING) +#else +# define CONFIG_COMMANDS ((CONFIG_CMD_DFL \ + | CFG_CMD_ENV \ + | CFG_CMD_NAND \ + | CFG_CMD_I2C) \ + & ~(CFG_CMD_NET \ + | CFG_CMD_FLASH \ + | CFG_CMD_IMLS)) +#endif + + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include <cmd_confdefs.h> + +#define CONFIG_BOOTDELAY -1 +#define CONFIG_ETHADDR 08:00:3e:26:0a:5b +#define CONFIG_NETMASK 255.255.0.0 +#define CONFIG_IPADDR 192.168.0.21 +#define CONFIG_SERVERIP 192.168.0.250 +#define CONFIG_BOOTCOMMAND "bootm 80000" +#define CONFIG_BOOTARGS "root=/dev/mtdblock2 rootfstype=cramfs console=ttyS0,115200" +#define CONFIG_CMDLINE_TAG +#define CONFIG_TIMESTAMP + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ +#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ +#endif + +/* + * Miscellaneous configurable options + */ +#define CFG_HUSH_PARSER 1 +#define CFG_PROMPT_HUSH_PS2 "> " + +#define CFG_LONGHELP /* undef to save memory */ +#ifdef CFG_HUSH_PARSER +#define CFG_PROMPT "$ " /* Monitor Command Prompt */ +#else +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#endif +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CFG_DEVICE_NULLDEV 1 + +#define CFG_MEMTEST_START 0x80400000 /* memtest works on */ +#define CFG_MEMTEST_END 0x80800000 /* 4 ... 8 MB in DRAM */ + +#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ + +#define CFG_LOAD_ADDR (CFG_DRAM_BASE + 0x8000) /* default load address */ + +#define CFG_HZ 3250000 /* incrementer freq: 3.25 MHz */ + +/* Monahans Core Frequency */ +#define CFG_MONAHANS_RUN_MODE_OSC_RATIO 16 /* valid values: 8, 16, 24, 31 */ +#define CFG_MONAHANS_TURBO_RUN_MODE_RATIO 1 /* valid values: 1, 2 */ + + + /* valid baudrates */ +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +/* #define CFG_MMC_BASE 0xF0000000 */ + +/* + * Stack sizes + * + * The stack sizes are set up in start.S using the settings below + */ +#define CONFIG_STACKSIZE (128*1024) /* regular stack */ +#ifdef CONFIG_USE_IRQ +#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ +#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ +#endif + +/* + * Physical Memory Map + */ +#define CONFIG_NR_DRAM_BANKS 4 /* we have 2 banks of DRAM */ +#define PHYS_SDRAM_1 0x80000000 /* SDRAM Bank #1 */ +#define PHYS_SDRAM_1_SIZE 0x1000000 /* 64 MB */ +#define PHYS_SDRAM_2 0x81000000 /* SDRAM Bank #2 */ +#define PHYS_SDRAM_2_SIZE 0x1000000 /* 64 MB */ +#define PHYS_SDRAM_3 0x82000000 /* SDRAM Bank #3 */ +#define PHYS_SDRAM_3_SIZE 0x1000000 /* 64 MB */ +#define PHYS_SDRAM_4 0x83000000 /* SDRAM Bank #4 */ +#define PHYS_SDRAM_4_SIZE 0x1000000 /* 64 MB */ + +#define CFG_DRAM_BASE 0x80000000 /* at CS0 */ +#define CFG_DRAM_SIZE 0x04000000 /* 64 MB Ram */ + +#undef CFG_SKIP_DRAM_SCRUB + +/* + * NAND Flash + */ +/* Use the new NAND code. (BOARDLIBS = drivers/nand/libnand.a required) */ +#undef CFG_NAND_LEGACY + +#define CFG_NAND0_BASE 0x0 /* 0x43100040 */ /* 0x10000000 */ +#undef CFG_NAND1_BASE + +#define CFG_NAND_BASE_LIST { CFG_NAND0_BASE } +#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ + +/* nand timeout values */ +#define CFG_NAND_PROG_ERASE_TO 3000 +#define CFG_NAND_OTHER_TO 100 +#define CFG_NAND_SENDCMD_RETRY 3 +#undef NAND_ALLOW_ERASE_ALL /* Allow erasing bad blocks - don't use */ + +/* NAND Timing Parameters (in ns) */ +#define NAND_TIMING_tCH 10 +#define NAND_TIMING_tCS 0 +#define NAND_TIMING_tWH 20 +#define NAND_TIMING_tWP 40 + +#define NAND_TIMING_tRH 20 +#define NAND_TIMING_tRP 40 + +#define NAND_TIMING_tR 11123 +#define NAND_TIMING_tWHR 100 +#define NAND_TIMING_tAR 10 + +/* NAND debugging */ +#define CFG_DFC_DEBUG1 /* usefull */ +#undef CFG_DFC_DEBUG2 /* noisy */ +#undef CFG_DFC_DEBUG3 /* extremly noisy */ + +#define CONFIG_MTD_DEBUG +#define CONFIG_MTD_DEBUG_VERBOSE 1 + +#define ADDR_COLUMN 1 +#define ADDR_PAGE 2 +#define ADDR_COLUMN_PAGE 3 + +#define NAND_ChipID_UNKNOWN 0x00 +#define NAND_MAX_FLOORS 1 +#define NAND_MAX_CHIPS 1 + +#define CFG_NO_FLASH 1 + +#define CFG_ENV_IS_IN_NAND 1 +#define CFG_ENV_OFFSET 0x40000 +#define CFG_ENV_OFFSET_REDUND 0x44000 +#define CFG_ENV_SIZE 0x4000 + +#endif /* __CONFIG_H */ diff --git a/include/configs/ezkit533.h b/include/configs/ezkit533.h new file mode 100644 index 0000000000..5eda6732ca --- /dev/null +++ b/include/configs/ezkit533.h @@ -0,0 +1,188 @@ +#ifndef __CONFIG_EZKIT533_H__ +#define __CONFIG_EZKIT533_H__ + +#define CFG_LONGHELP 1 +#define CONFIG_BAUDRATE 57600 +#define CONFIG_STAMP 1 +#define CONFIG_BOOTDELAY 5 + +#define CONFIG_DRIVER_SMC91111 1 +#define CONFIG_SMC91111_BASE 0x20310300 +#if 0 +#define CONFIG_MII +#define CFG_DISCOVER_PHY +#endif + +#define CONFIG_RTC_BF533 1 +#define CONFIG_BOOT_RETRY_TIME -1 /* Enable this if bootretry required, currently its disabled */ + +/* CONFIG_CLKIN_HZ is any value in Hz */ +#define CONFIG_CLKIN_HZ 27000000 +/* CONFIG_CLKIN_HALF controls what is passed to PLL 0=CLKIN */ +/* 1=CLKIN/2 */ +#define CONFIG_CLKIN_HALF 0 +/* CONFIG_PLL_BYPASS controls if the PLL is used 0=don't bypass */ +/* 1=bypass PLL */ +#define CONFIG_PLL_BYPASS 0 +/* CONFIG_VCO_MULT controls what the multiplier of the PLL is. */ +/* Values can range from 1-64 */ +#define CONFIG_VCO_MULT 22 +/* CONFIG_CCLK_DIV controls what the core clock divider is */ +/* Values can be 1, 2, 4, or 8 ONLY */ +#define CONFIG_CCLK_DIV 1 +/* CONFIG_SCLK_DIV controls what the peripheral clock divider is */ +/* Values can range from 1-15 */ +#define CONFIG_SCLK_DIV 5 + +#if ( CONFIG_CLKIN_HALF == 0 ) +#define CONFIG_VCO_HZ ( CONFIG_CLKIN_HZ * CONFIG_VCO_MULT ) +#else +#define CONFIG_VCO_HZ (( CONFIG_CLKIN_HZ * CONFIG_VCO_MULT ) / 2 ) +#endif + +#if (CONFIG_PLL_BYPASS == 0) +#define CONFIG_CCLK_HZ ( CONFIG_VCO_HZ / CONFIG_CCLK_DIV ) +#define CONFIG_SCLK_HZ ( CONFIG_VCO_HZ / CONFIG_SCLK_DIV ) +#else +#define CONFIG_CCLK_HZ CONFIG_CLKIN_HZ +#define CONFIG_SCLK_HZ CONFIG_CLKIN_HZ +#endif + +#define CONFIG_MEM_SIZE 32 /* 128, 64, 32, 16 */ +#define CONFIG_MEM_ADD_WDTH 9 /* 8, 9, 10, 11 */ +#define CONFIG_MEM_MT48LC16M16A2TG_75 1 + +#define CONFIG_LOADS_ECHO 1 + + +#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ + CFG_CMD_PING | \ + CFG_CMD_ELF | \ + CFG_CMD_I2C | \ + CFG_CMD_JFFS2 | \ + CFG_CMD_DATE) +#define CONFIG_BOOTARGS "root=/dev/mtdblock0 ip=192.168.0.15:192.168.0.2:192.168.0.1:255.255.255.0:ezkit:eth0:off" + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include <cmd_confdefs.h> + +#define CFG_PROMPT "ezkit> " /* Monitor Command Prompt */ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CFG_MEMTEST_START 0x00100000 /* memtest works on */ +#define CFG_MEMTEST_END 0x01F00000 /* 1 ... 31 MB in DRAM */ +#define CFG_LOAD_ADDR 0x01000000 /* default load address */ +#define CFG_HZ 1000 /* decrementer freq: 10 ms ticks */ +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } +#define CFG_SDRAM_BASE 0x00000000 +#define CFG_MAX_RAM_SIZE 0x02000000 +#define CFG_FLASH_BASE 0x20000000 + +#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ +#define CFG_MONITOR_BASE (CFG_MAX_RAM_SIZE - CFG_MONITOR_LEN) +#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ +#define CFG_MALLOC_BASE (CFG_MONITOR_BASE - CFG_MALLOC_LEN) +#define CFG_GBL_DATA_SIZE 0x4000 +#define CFG_GBL_DATA_ADDR (CFG_MALLOC_BASE - CFG_GBL_DATA_SIZE) +#define CONFIG_STACKBASE (CFG_GBL_DATA_ADDR - 4) + +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ +#define CFG_FLASH0_BASE 0x20000000 +#define CFG_FLASH1_BASE 0x20200000 +#define CFG_FLASH2_BASE 0x20280000 +#define CFG_MAX_FLASH_BANKS 3 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 40 /* max number of sectors on one chip */ + +#define CFG_ENV_IS_IN_FLASH 1 +#define CFG_ENV_ADDR 0x20020000 +#define CFG_ENV_SECT_SIZE 0x10000 /* Total Size of Environment Sector */ + +/* JFFS Partition offset set */ +#define CFG_JFFS2_FIRST_BANK 0 +#define CFG_JFFS2_NUM_BANKS 1 +/* 512k reserved for u-boot */ +#define CFG_JFFS2_FIRST_SECTOR 11 + + +/* + * Stack sizes + */ +#define CONFIG_STACKSIZE (128*1024) /* regular stack */ + +#define POLL_MODE 1 +#define FLASH_TOT_SECT 40 +#define FLASH_SIZE 0x220000 +#define CFG_FLASH_SIZE 0x220000 + +/* + * Initialize PSD4256 registers for using I2C + */ +#define CONFIG_MISC_INIT_R + +/* + * I2C settings + * By default PF1 is used as SDA and PF0 as SCL on the Stamp board + */ +#define CONFIG_SOFT_I2C 1 /* I2C bit-banged */ +/* + * Software (bit-bang) I2C driver configuration + */ +#define PF_SCL PF0 +#define PF_SDA PF1 + +#define I2C_INIT (*pFIO_DIR |= PF_SCL); asm("ssync;") +#define I2C_ACTIVE (*pFIO_DIR |= PF_SDA); *pFIO_INEN &= ~PF_SDA; asm("ssync;") +#define I2C_TRISTATE (*pFIO_DIR &= ~PF_SDA); *pFIO_INEN |= PF_SDA; asm("ssync;") +#define I2C_READ ((volatile)(*pFIO_FLAG_D & PF_SDA) != 0); asm("ssync;") +#define I2C_SDA(bit) if(bit) { \ + *pFIO_FLAG_S = PF_SDA; \ + asm("ssync;"); \ + } \ + else { \ + *pFIO_FLAG_C = PF_SDA; \ + asm("ssync;"); \ + } +#define I2C_SCL(bit) if(bit) { \ + *pFIO_FLAG_S = PF_SCL; \ + asm("ssync;"); \ + } \ + else { \ + *pFIO_FLAG_C = PF_SCL; \ + asm("ssync;"); \ + } +#define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */ + +#define CFG_I2C_SPEED 50000 +#define CFG_I2C_SLAVE 0xFE + + +#define __ADSPLPBLACKFIN__ 1 +#define __ADSPBF533__ 1 + +/* 0xFF, 0x7BB07BB0, 0x22547BB0 */ +/* #define AMGCTLVAL (AMBEN_P0 | AMBEN_P1 | AMBEN_P2 | AMCKEN) +#define AMBCTL0VAL (B1WAT_7 | B1RAT_11 | B1HT_2 | B1ST_3 | B1TT_4 | ~B1RDYPOL | \ + ~B1RDYEN | B0WAT_7 | B0RAT_11 | B0HT_2 | B0ST_3 | B0TT_4 | ~B0RDYPOL | ~B0RDYEN) +#define AMBCTL1VAL (B3WAT_2 | B3RAT_2 | B3HT_1 | B3ST_1 | B3TT_4 | B3RDYPOL | ~B3RDYEN | \ + B2WAT_7 | B2RAT_11 | B2HT_2 | B2ST_3 | B2TT_4 | ~B2RDYPOL | ~B2RDYEN) +*/ +#define AMGCTLVAL 0xFF +#define AMBCTL0VAL 0x7BB07BB0 +#define AMBCTL1VAL 0xFFC27BB0 + +#define CONFIG_VDSP 1 + +#ifdef CONFIG_VDSP +#define ET_EXEC_VDSP 0x8 +#define SHT_STRTAB_VDSP 0x1 +#define ELFSHDRSIZE_VDSP 0x2C +#define VDSP_ENTRY_ADDR 0xFFA00000 +#endif + +#endif diff --git a/include/configs/gth2.h b/include/configs/gth2.h new file mode 100644 index 0000000000..77d2d56e89 --- /dev/null +++ b/include/configs/gth2.h @@ -0,0 +1,195 @@ +/* + * (C) Copyright 2005 + * Thomas.Lange@corelatus.se + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * This file contains the configuration parameters for the gth2 board. + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#define CONFIG_MIPS32 1 /* MIPS32 CPU core */ +#define CONFIG_GTH2 1 +#define CONFIG_AU1X00 1 /* alchemy series cpu */ + +#define CONFIG_AU1000 1 + +#define CONFIG_MISC_INIT_R 1 + +#define CONFIG_ETHADDR DE:AD:BE:EF:01:02 /* Ethernet address */ + +#define CONFIG_BOOTDELAY 1 /* autoboot after 1 seconds */ + +#define CONFIG_ENV_OVERWRITE 1 /* Allow change of ethernet address */ + +#define CONFIG_BOOT_RETRY_TIME 5 /* Retry boot in 5 secs */ + +#define CONFIG_RESET_TO_RETRY 1 /* If timeout waiting for command, perform a reset */ + +#define CONFIG_BAUDRATE 115200 + +/* valid baudrates */ +#define CFG_BAUDRATE_TABLE { 115200 } + +/* Only interrupt boot if space is pressed */ +/* If a long serial cable is connected but */ +/* other end is dead, garbage will be read */ +#define CONFIG_AUTOBOOT_KEYED 1 +#define CONFIG_AUTOBOOT_PROMPT "Press space to abort autoboot in %d second\n" +#define CONFIG_AUTOBOOT_DELAY_STR "d" +#define CONFIG_AUTOBOOT_STOP_STR " " + +#define CONFIG_TIMESTAMP /* Print image info with timestamp */ +#define CONFIG_BOOTARGS "panic=1" + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "addmisc=setenv bootargs $(bootargs) " \ + "ethaddr=$(ethaddr) \0" \ + "netboot=bootp;run addmisc;bootm\0" \ + "" + +/* Boot from Compact flash partition 2 as default */ +#define CONFIG_BOOTCOMMAND "ide reset;disk 0x81000000 0:2;run addmisc;bootm" + +#define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_IDE | CFG_CMD_DHCP ) & \ + ~(CFG_CMD_ENV | CFG_CMD_FAT | CFG_CMD_FLASH | CFG_CMD_FPGA | \ + CFG_CMD_MII | CFG_CMD_LOADS | CFG_CMD_LOADB | CFG_CMD_ELF | \ + CFG_CMD_BDI | CFG_CMD_BEDBUG | CFG_CMD_NFS | CFG_CMD_AUTOSCRIPT )) + +#include <cmd_confdefs.h> + +/* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "GTH2 # " /* Monitor Command Prompt */ +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args*/ + +#define CFG_MALLOC_LEN 128*1024 + +#define CFG_BOOTPARAMS_LEN 128*1024 + +#define CFG_MHZ 500 + +#define CFG_HZ (CFG_MHZ * 1000000) /* FIXME causes overflow in net.c */ + +#define CFG_SDRAM_BASE 0x80000000 /* Cached addr */ + +#define CFG_LOAD_ADDR 0x81000000 /* default load address */ + +#define CFG_MEMTEST_START 0x80100000 +#define CFG_MEMTEST_END 0x83000000 + +#define CONFIG_HW_WATCHDOG 1 + +/*----------------------------------------------------------------------- + * FLASH and environment organization + */ +#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT (128) /* max number of sectors on one chip */ + +#define PHYS_FLASH 0xbfc00000 /* Flash Bank #1 */ + +/* The following #defines are needed to get flash environment right */ +#define CFG_MONITOR_BASE TEXT_BASE +#define CFG_MONITOR_LEN (192 << 10) + +#define CFG_INIT_SP_OFFSET 0x400000 + +/* We boot from this flash, selected with dip switch */ +#define CFG_FLASH_BASE PHYS_FLASH + +/* timeout values are in ticks */ +#define CFG_FLASH_ERASE_TOUT (2 * CFG_HZ) /* Timeout for Flash Erase */ +#define CFG_FLASH_WRITE_TOUT (2 * CFG_HZ) /* Timeout for Flash Write */ + +#define CFG_ENV_IS_NOWHERE 1 + +/* Address and size of Primary Environment Sector */ +#define CFG_ENV_ADDR 0xB0030000 +#define CFG_ENV_SIZE 0x10000 + +#define CONFIG_FLASH_16BIT + +#define CONFIG_NR_DRAM_BANKS 2 + +#define CONFIG_NET_MULTI + +#define CONFIG_MEMSIZE_IN_BYTES + +/*---ATA PCMCIA ------------------------------------*/ +#define CFG_PCMCIA_MEM_SIZE 0x4000000 /* Offset to slot 1 FIXME!!! */ + +#define CFG_PCMCIA_MEM_ADDR 0x20000000 +#define CFG_PCMCIA_IO_BASE 0x28000000 +#define CFG_PCMCIA_ATTR_BASE 0x30000000 + +#define CONFIG_PCMCIA_SLOT_A + +#define CONFIG_ATAPI 1 +#define CONFIG_MAC_PARTITION 1 + +/* We run CF in "true ide" mode or a harddrive via pcmcia */ +#define CONFIG_IDE_PCMCIA 1 + +/* We only support one slot for now */ +#define CFG_IDE_MAXBUS 1 /* max. 1 IDE bus */ +#define CFG_IDE_MAXDEVICE 1 /* max. 1 drive per IDE bus */ + +#undef CONFIG_IDE_LED /* LED for ide not supported */ +#undef CONFIG_IDE_RESET /* reset for ide not supported */ + +#define CFG_ATA_IDE0_OFFSET 0 + +#define CFG_ATA_BASE_ADDR CFG_PCMCIA_IO_BASE + +/* Offset for data I/O */ +#define CFG_ATA_DATA_OFFSET 0 + +/* Offset for normal register accesses */ +#define CFG_ATA_REG_OFFSET 0 + +/* Offset for alternate registers */ +#define CFG_ATA_ALT_OFFSET 0x0200 + +/*----------------------------------------------------------------------- + * Cache Configuration + */ +#define CFG_DCACHE_SIZE 16384 +#define CFG_ICACHE_SIZE 16384 +#define CFG_CACHELINE_SIZE 32 + +#define GPIO_CACONFIG (1<<0) +#define GPIO_DPACONFIG (1<<6) +#define GPIO_ERESET (1<<11) +#define GPIO_EEDQ (1<<17) +#define GPIO_WDI (1<<18) +#define GPIO_RJ1LY (1<<22) +#define GPIO_RJ1LG (1<<23) +#define GPIO_LEDCLK (1<<29) +#define GPIO_LEDD (1<<30) +#define GPIO_CPU_LED (1<<31) + +#endif /* __CONFIG_H */ diff --git a/include/configs/gw8260.h b/include/configs/gw8260.h index 6c080437ff..4f83b1945d 100644 --- a/include/configs/gw8260.h +++ b/include/configs/gw8260.h @@ -305,7 +305,6 @@ CFG_CMD_BEDBUG | \ CFG_CMD_ELF | \ CFG_CMD_ASKENV | \ - CFG_CMD_ECHO | \ CFG_CMD_REGINFO | \ CFG_CMD_IMMAP | \ CFG_CMD_MII) diff --git a/include/configs/inka4x0.h b/include/configs/inka4x0.h index c0cc4f1fbe..773d5d2c1d 100644 --- a/include/configs/inka4x0.h +++ b/include/configs/inka4x0.h @@ -101,7 +101,7 @@ /* * Autobooting */ -#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ +#define CONFIG_BOOTDELAY 1 /* autoboot after 1 second */ #define CONFIG_PREBOOT "echo;" \ "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \ @@ -109,6 +109,16 @@ #undef CONFIG_BOOTARGS +#define CONFIG_ETHADDR 00:a0:a4:03:00:00 +#define CONFIG_OVERWRITE_ETHADDR_ONCE + +#define CONFIG_IPADDR 192.168.100.2 +#define CONFIG_SERVERIP 192.168.100.1 +#define CONFIG_NETMASK 255.255.255.0 +#define HOSTNAME inka4x0 +#define CONFIG_BOOTFILE /tftpboot/inka4x0/uImage +#define CONFIG_ROOTPATH /opt/eldk/ppc_6xx + #define CONFIG_EXTRA_ENV_SETTINGS \ "netdev=eth0\0" \ "nfsargs=setenv bootargs root=/dev/nfs rw " \ @@ -117,13 +127,22 @@ "addip=setenv bootargs ${bootargs} " \ "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ ":${hostname}:${netdev}:off panic=1\0" \ - "flash_nfs=run nfsargs addip;" \ + "addcons=setenv bootargs ${bootargs} " \ + "console=ttyS0,${baudrate}\0" \ + "flash_nfs=run nfsargs addip addcons;" \ "bootm ${kernel_addr}\0" \ - "net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \ - "rootpath=/opt/eldk/ppc_82xx\0" \ + "net_nfs=tftp 200000 ${bootfile};" \ + "run nfsargs addip addcons;bootm\0" \ + "enable_disp=mw.l 100000 04000000 1;" \ + "cp.l 100000 f0000b20 1;" \ + "cp.l 100000 f0000b28 1\0" \ + "ideargs=setenv bootargs root=/dev/hda1 rw\0" \ + "ide_boot=ext2load ide 0:1 200000 uImage;" \ + "run ideargs addip addcons enable_disp;bootm" \ + "brightness=255\0" \ "" -#define CONFIG_BOOTCOMMAND "run net_nfs" +#define CONFIG_BOOTCOMMAND "run ide_boot" /* * IPB Bus clocking configuration. @@ -193,6 +212,7 @@ */ /* #define CONFIG_FEC_10MBIT 1 */ #define CONFIG_PHY_ADDR 0x00 +#define CONFIG_MII /* * GPIO configuration diff --git a/include/configs/ixdp425.h b/include/configs/ixdp425.h index b0a80a3ea2..9f9fdb25e2 100644 --- a/include/configs/ixdp425.h +++ b/include/configs/ixdp425.h @@ -33,6 +33,9 @@ #define CONFIG_IXP425 1 /* This is an IXP425 CPU */ #define CONFIG_IXDP425 1 /* on an IXDP425 Board */ +#define CONFIG_DISPLAY_CPUINFO 1 /* display cpu info (and speed) */ +#define CONFIG_DISPLAY_BOARDINFO 1 /* display board info */ + /*************************************************************** * U-boot generic defines start here. ***************************************************************/ @@ -135,6 +138,8 @@ #define CFG_DRAM_SIZE 0x01000000 #define CFG_FLASH_BASE PHYS_FLASH_1 +#define CFG_MONITOR_BASE CFG_FLASH_BASE +#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ /* * Expansion bus settings @@ -155,16 +160,27 @@ /* * FLASH and environment organization */ +/* + * FLASH and environment organization + */ #define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CFG_MAX_FLASH_SECT 128 /* max number of sectors on one chip */ +#define CFG_MAX_FLASH_SECT 128 /* max number of sectors on one chip */ + +#define CFG_FLASH_CFI /* The flash is CFI compatible */ +#define CFG_FLASH_CFI_DRIVER /* Use common CFI driver */ +#define CFG_ENV_IS_IN_FLASH 1 + +#define CFG_FLASH_BANKS_LIST { PHYS_FLASH_1 } + +#define CFG_FLASH_CFI_WIDTH FLASH_CFI_16BIT /* no byte writes on IXP4xx */ + +#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ +#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ -/* timeout values are in ticks */ -#define CFG_FLASH_ERASE_TOUT (25*CFG_HZ) /* Timeout for Flash Erase */ -#define CFG_FLASH_WRITE_TOUT (25*CFG_HZ) /* Timeout for Flash Write */ +#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ -/* FIXME */ -#define CFG_ENV_IS_IN_FLASH 1 -#define CFG_ENV_ADDR (PHYS_FLASH_1 + 0x20000) /* Addr of Environment Sector */ -#define CFG_ENV_SIZE 0x20000 /* Total Size of Environment Sector */ +#define CFG_ENV_SECT_SIZE 0x20000 /* size of one complete sector */ +#define CFG_ENV_ADDR (PHYS_FLASH_1 + 0x20000) +#define CFG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */ #endif /* __CONFIG_H */ diff --git a/include/configs/ixdpg425.h b/include/configs/ixdpg425.h new file mode 100644 index 0000000000..af4ecf621a --- /dev/null +++ b/include/configs/ixdpg425.h @@ -0,0 +1,240 @@ +/* + * (C) Copyright 2005-2006 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * (C) Copyright 2003 + * Martijn de Gouw, Prodrive B.V., martijn.de.gouw@prodrive.nl + * + * Configuation settings for the IXDPG425 board. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Configuration Options + * (easy to change) + */ +#define CONFIG_IXP425 1 /* This is an IXP425 CPU */ +#define CONFIG_IXDPG425 1 /* on an IXDPG425 Board */ + +#define CONFIG_DISPLAY_CPUINFO 1 /* display cpu info (and speed) */ +#define CONFIG_DISPLAY_BOARDINFO 1 /* display board info */ + +/* + * Ethernet + */ +#define CONFIG_IXP4XX_NPE 1 /* include IXP4xx NPE support */ +#define CONFIG_NET_MULTI 1 +#define CONFIG_PHY_ADDR 5 /* NPE0 PHY address */ +#define CONFIG_HAS_ETH1 +#define CONFIG_PHY1_ADDR 4 /* NPE1 PHY address */ +#define CONFIG_MII 1 /* MII PHY management */ +#define CFG_RX_ETH_BUFFER 16 /* Number of ethernet rx buffers & descriptors */ + +/* + * Misc configuration options + */ +#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ +#define CONFIG_USE_IRQ 1 /* we need IRQ stuff for timer */ + +#define CONFIG_BOOTCOUNT_LIMIT /* support for bootcount limit */ +#define CFG_BOOTCOUNT_ADDR 0x60003000 /* inside qmrg sram */ + +#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS 1 +#define CONFIG_INITRD_TAG 1 + +/* + * Size of malloc() pool + */ +#define CFG_MALLOC_LEN (256 << 10) +#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ + +/* allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE + +#define CONFIG_BAUDRATE 115200 +#define CFG_IXP425_CONSOLE IXP425_UART1 /* we use UART1 for console */ + +#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ + CFG_CMD_DHCP | \ + CFG_CMD_ELF | \ + CFG_CMD_NET | \ + CFG_CMD_MII | \ + CFG_CMD_PING) + +/* This must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +/* These are u-boot generic parameters */ +#include <cmd_confdefs.h> + +#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ +#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ + +/* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_MEMTEST_START 0x00400000 /* memtest works on */ +#define CFG_MEMTEST_END 0x00800000 /* 4 ... 8 MB in DRAM */ +#define CFG_LOAD_ADDR 0x00010000 /* default load address */ + +#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ +#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ + + /* valid baudrates */ +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +/* + * Stack sizes + * + * The stack sizes are set up in start.S using the settings below + */ +#define CONFIG_STACKSIZE (128*1024) /* regular stack */ +#ifdef CONFIG_USE_IRQ +#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ +#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ +#endif + +/*************************************************************** + * Platform/Board specific defines start here. + ***************************************************************/ + +/*----------------------------------------------------------------------- + * Default configuration (environment varibles...) + *----------------------------------------------------------------------*/ +#define CONFIG_PREBOOT "echo;" \ + "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \ + "echo" + +#undef CONFIG_BOOTARGS + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "hostname=ixdpg425\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=${serverip}:${rootpath}\0" \ + "ramargs=setenv bootargs root=/dev/ram rw\0" \ + "addip=setenv bootargs ${bootargs} " \ + "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ + ":${hostname}:${netdev}:off panic=1\0" \ + "addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\ + "flash_nfs=run nfsargs addip addtty;" \ + "bootm ${kernel_addr}\0" \ + "flash_self=run ramargs addip addtty;" \ + "bootm ${kernel_addr} ${ramdisk_addr}\0" \ + "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \ + "bootm\0" \ + "rootpath=/opt/eldk/arm\0" \ + "bootfile=/tftpboot/ixdpg425/uImage\0" \ + "kernel_addr=50080000\0" \ + "ramdisk_addr=50200000\0" \ + "load=tftp 100000 /tftpboot/ixdpg425/u-boot.bin\0" \ + "update=protect off 50000000 5003ffff;era 50000000 5003ffff;" \ + "cp.b 100000 50000000 40000;" \ + "setenv filesize;saveenv\0" \ + "upd=run load;run update\0" \ + "" +#define CONFIG_BOOTCOMMAND "run net_nfs" + +/* + * Physical Memory Map + */ +#define CONFIG_NR_DRAM_BANKS 1 /* we have 2 banks of DRAM */ +#define PHYS_SDRAM_1 0x00000000 /* SDRAM Bank #1 */ +#define PHYS_SDRAM_1_SIZE 0x02000000 /* 32 MB */ + +#define PHYS_FLASH_1 0x50000000 /* Flash Bank #1 */ +#define PHYS_FLASH_SIZE 0x01000000 /* 16 MB */ +#define PHYS_FLASH_BANK_SIZE 0x01000000 /* 16 MB Banks */ +#define PHYS_FLASH_SECT_SIZE 0x00020000 /* 128 KB sectors (x1) */ + +#define CFG_DRAM_BASE 0x00000000 +#define CFG_DRAM_SIZE 0x01000000 + +#define CFG_FLASH_BASE PHYS_FLASH_1 +#define CFG_MONITOR_BASE CFG_FLASH_BASE +#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ + +/* + * Expansion bus settings + */ +#define CFG_EXP_CS0 0xbcd23c42 + +/* + * SDRAM settings + */ +#define CFG_SDR_CONFIG 0x18 +#define CFG_SDR_MODE_CONFIG 0x1 +#define CFG_SDRAM_REFRESH_CNT 0x81a + +/* + * FLASH and environment organization + */ +#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 128 /* max number of sectors on one chip */ + +#define CFG_FLASH_CFI /* The flash is CFI compatible */ +#define CFG_FLASH_CFI_DRIVER /* Use common CFI driver */ +#define CFG_ENV_IS_IN_FLASH 1 + +#define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */ +#define CFG_FLASH_PROTECTION 1 /* hardware flash protection */ + +#define CFG_FLASH_BANKS_LIST { PHYS_FLASH_1 } + +#define CFG_FLASH_CFI_WIDTH FLASH_CFI_16BIT /* no byte writes on IXP4xx */ + +#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ +#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ + +#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ + +#define CFG_ENV_SECT_SIZE 0x20000 /* size of one complete sector */ +#define CFG_ENV_ADDR (PHYS_FLASH_1 + 0x40000) +#define CFG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */ + +/* Address and size of Redundant Environment Sector */ +#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR + CFG_ENV_SECT_SIZE) +#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) + +/* + * GPIO settings + */ +#define CFG_GPIO_PCI_INTA_N 6 +#define CFG_GPIO_PCI_INTB_N 7 +#define CFG_GPIO_SWITCH_RESET_N 8 +#define CFG_GPIO_SLIC_RESET_N 13 +#define CFG_GPIO_PCI_CLK 14 +#define CFG_GPIO_EXTBUS_CLK 15 + +/* + * Cache Configuration + */ +#define CFG_CACHELINE_SIZE 32 + +#endif /* __CONFIG_H */ diff --git a/include/configs/mcc200.h b/include/configs/mcc200.h new file mode 100644 index 0000000000..d8d63a112c --- /dev/null +++ b/include/configs/mcc200.h @@ -0,0 +1,271 @@ +/* + * (C) Copyright 2006 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Configuration Options + * (easy to change) + */ + +#define CONFIG_MPC5200 +#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */ +#define CONFIG_MCC200 1 /* ... on MCC200 board */ + +#define CFG_MPC5XXX_CLKIN 33000000 /* ... running at 33MHz */ + +#define CONFIG_MISC_INIT_R + +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#endif + +/* + * Serial console configuration + */ +#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */ +#define CONFIG_BAUDRATE 115200 +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } + +#define CONFIG_MII 1 + +#define CONFIG_DOS_PARTITION + +/* USB */ +#define CONFIG_USB_OHCI +#define ADD_USB_CMD CFG_CMD_USB | CFG_CMD_FAT +#define CONFIG_USB_STORAGE + +/* + * Supported commands + */ +#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ + ADD_USB_CMD | \ + CFG_CMD_BEDBUG | \ + CFG_CMD_FAT | \ + CFG_CMD_I2C) + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include <cmd_confdefs.h> + +/* + * Autobooting + */ +#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ + +#define CONFIG_PREBOOT "echo;" \ + "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \ + "echo" + +#undef CONFIG_BOOTARGS + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "hostname=mcc200\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=${serverip}:${rootpath}\0" \ + "ramargs=setenv bootargs root=/dev/ram rw\0" \ + "addip=setenv bootargs ${bootargs} " \ + "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ + ":${hostname}:${netdev}:off panic=1\0" \ + "flash_nfs=run nfsargs addip;" \ + "bootm ${kernel_addr}\0" \ + "flash_self=run ramargs addip;" \ + "bootm ${kernel_addr} ${ramdisk_addr}\0" \ + "net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \ + "rootpath=/opt/eldk/ppc_6xx\0" \ + "bootfile=/tftpboot/mcc200/uImage\0" \ + "baudrate=115200\0" \ + "load=tftp 200000 /tftpboot/mcc200/u-boot.bin\0" \ + "update=protect off FFF00000 +${filesize};" \ + "era FFF00000 +${filesize};" \ + "cp.b 200000 FFF00000 ${filesize}\0" \ + "serverip=192.168.1.1\0" \ + "ipaddr=192.168.133.144\0" \ + "netmask=255.255.0.0\0" \ + "unlock=yes\0" \ + "ethaddr=00:02:44:7D:73:3B\0" \ + "" + +#define CONFIG_BOOTCOMMAND "run flash_self" + +#define CFG_HUSH_PARSER 1 /* use "hush" command parser */ +#define CFG_PROMPT_HUSH_PS2 "> " + +/* + * IPB Bus clocking configuration. + */ +#define CFG_IPBSPEED_133 /* define for 133MHz speed */ + +/* + * I2C configuration + */ +#define CONFIG_HARD_I2C 1 /* I2C with hardware support */ +#define CFG_I2C_MODULE 1 /* Select I2C module #1 or #2 */ + +#define CFG_I2C_SPEED 100000 /* 100 kHz */ +#define CFG_I2C_SLAVE 0x7F + +/* + * Flash configuration (8,16 or 32 MB) + * TEXT base always at 0xFFF00000 + * ENV_ADDR always at 0xFFF40000 + * FLASH_BASE at 0xFC000000 for 64 MB (only 32MB are supported, not enough addr lines!!!) + * 0xFE000000 for 32 MB + * 0xFF000000 for 16 MB + * 0xFF800000 for 8 MB + */ +#define CFG_FLASH_BASE 0xfc000000 +#define CFG_FLASH_SIZE 0x04000000 + +#define CFG_FLASH_CFI /* The flash is CFI compatible */ +#define CFG_FLASH_CFI_DRIVER /* Use common CFI driver */ + +#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE } + +#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 512 /* max number of sectors on one chip */ + +#define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */ +#define CFG_FLASH_PROTECTION 1 /* hardware flash protection */ + +#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ +#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ + +#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ +#define CFG_FLASH_QUIET_TEST 1 /* don't warn upon unknown flash */ + +#define CFG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */ + +#define CFG_ENV_SECT_SIZE 0x40000 /* size of one complete sector */ +#define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN) +#define CFG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */ + +/* Address and size of Redundant Environment Sector */ +#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR + CFG_ENV_SECT_SIZE) +#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) + +#define CONFIG_ENV_OVERWRITE 1 /* allow modification of vendor params */ + +#if TEXT_BASE == CFG_FLASH_BASE +#define CFG_LOWBOOT 1 +#endif + +/* + * Memory map + */ +#define CFG_MBAR 0xf0000000 +#define CFG_SDRAM_BASE 0x00000000 +#define CFG_DEFAULT_MBAR 0x80000000 + +/* Use SRAM until RAM will be available */ +#define CFG_INIT_RAM_ADDR MPC5XXX_SRAM +#define CFG_INIT_RAM_END MPC5XXX_SRAM_SIZE /* End of used area in DPRAM */ + + +#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET + +#define CFG_MONITOR_BASE TEXT_BASE +#if (CFG_MONITOR_BASE < CFG_FLASH_BASE) +# define CFG_RAMBOOT 1 +#endif + +#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ +#define CFG_MALLOC_LEN (512 << 10) /* Reserve 512 kB for malloc() */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ + +/* + * Ethernet configuration + */ +#define CONFIG_MPC5xxx_FEC 1 +/* + * Define CONFIG_FEC_10MBIT to force FEC at 10Mb + */ +/* #define CONFIG_FEC_10MBIT 1 */ +#define CONFIG_PHY_ADDR 1 + +/* + * GPIO configuration + */ +/* 0x10000004 = 32MB SDRAM */ +/* 0x90000004 = 64MB SDRAM */ +#define CFG_GPS_PORT_CONFIG 0x00000004 + +/* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_MEMTEST_START 0x00100000 /* memtest works on */ +#define CFG_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */ + +#define CFG_LOAD_ADDR 0x100000 /* default load address */ + +#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ + +/* + * Various low-level settings + */ +#define CFG_HID0_INIT HID0_ICE | HID0_ICFI +#define CFG_HID0_FINAL HID0_ICE + +#define CFG_BOOTCS_START CFG_FLASH_BASE +#define CFG_BOOTCS_SIZE CFG_FLASH_SIZE +#define CFG_BOOTCS_CFG 0x0004fb00 +#define CFG_CS0_START CFG_FLASH_BASE +#define CFG_CS0_SIZE CFG_FLASH_SIZE + +/* Quad UART @0x80000000 (MBAR is relocated to 0xF0000000) */ +#define CFG_CS2_START 0x80000000 +#define CFG_CS2_SIZE 0x00001000 +#define CFG_CS2_CFG 0x1d300 + +#define CFG_CS_BURST 0x00000000 +#define CFG_CS_DEADCYCLE 0x33333333 + +#define CFG_RESET_ADDRESS 0xff000000 + +/*----------------------------------------------------------------------- + * USB stuff + *----------------------------------------------------------------------- + */ +#define CONFIG_USB_CLOCK 0x0001BBBB +#define CONFIG_USB_CONFIG 0x00005000 + +#endif /* __CONFIG_H */ diff --git a/include/configs/netstar.h b/include/configs/netstar.h new file mode 100644 index 0000000000..697796a114 --- /dev/null +++ b/include/configs/netstar.h @@ -0,0 +1,265 @@ +/* + * (C) Copyright 2005 2N TELEKOMUNIKACE, Ladislav Michl + * + * Configuation settings for the TI OMAP NetStar board. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#include <configs/omap1510.h> + +/* + * High Level Configuration Options + * (easy to change) + */ +#define CONFIG_ARM925T 1 /* This is an arm925t CPU */ +#define CONFIG_OMAP 1 /* in a TI OMAP core */ +#define CONFIG_OMAP1510 1 /* which is in a 5910 */ + +/* Input clock of PLL */ +#define CONFIG_SYS_CLK_FREQ 150000000 /* 150MHz input clock */ +#define CONFIG_XTAL_FREQ 12000000 + +#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ + +#define CONFIG_MISC_INIT_R /* There is nothing to really init */ +#define BOARD_LATE_INIT /* but we flash the LEDs here */ + +#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS 1 +#define CONFIG_INITRD_TAG 1 + +#define CFG_DEVICE_NULLDEV 1 /* enable null device */ +#define CONFIG_SILENT_CONSOLE 1 /* enable silent startup */ + +/* + * Physical Memory Map + */ +#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ +#define PHYS_SDRAM_1 0x10000000 /* SDRAM Bank #1 */ +#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ + +/* + * FLASH organization + */ +#define CFG_FLASH_BASE PHYS_FLASH_1 +#define CFG_MAX_FLASH_BANKS 1 +#if (PHYS_SDRAM_1_SIZE == SZ_32M) +/*#if 1*/ +#define CFG_FLASH_CFI /* Flash is CFI conformant */ +#define CFG_FLASH_CFI_DRIVER /* Use the common driver */ +#define CFG_FLASH_EMPTY_INFO +#define CFG_MAX_FLASH_SECT 128 +#else +#define PHYS_FLASH_1_SIZE SZ_1M +#define CFG_MAX_FLASH_SECT 19 +#define CFG_FLASH_ERASE_TOUT (5*CFG_HZ) /* in ticks */ +#define CFG_FLASH_WRITE_TOUT (5*CFG_HZ) +#endif + +#define CFG_MONITOR_BASE PHYS_FLASH_1 +#define CFG_MONITOR_LEN SZ_256K + +/* + * Environment settings + */ +#define CFG_ENV_IS_IN_FLASH +#define ENV_IS_SOLITARY +#define CFG_ENV_ADDR 0x4000 +#define CFG_ENV_SIZE SZ_8K +#define CFG_ENV_SECT_SIZE SZ_8K +#define CFG_ENV_ADDR_REDUND 0x6000 +#define CFG_ENV_SIZE_REDUND CFG_ENV_SIZE +#define CONFIG_ENV_OVERWRITE + +/* + * Size of malloc() pool + */ +#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ +/* XXX #define CFG_MALLOC_LEN (SZ_64K - CFG_GBL_DATA_SIZE)*/ +#define CFG_MALLOC_LEN SZ_4M + +/* + * The stack size is set up in start.S using the settings below + */ +/* XXX #define CONFIG_STACKSIZE SZ_8K /XXX* regular stack */ +#define CONFIG_STACKSIZE SZ_1M /* regular stack */ + +/* + * Hardware drivers + */ +#define CONFIG_DRIVER_SMC91111 +#define CONFIG_SMC91111_BASE 0x04000300 + +/* + * NS16550 Configuration + */ +#define CFG_NS16550 +#define CFG_NS16550_SERIAL +#define CFG_NS16550_REG_SIZE (-4) +#define CFG_NS16550_CLK (CONFIG_XTAL_FREQ) /* can be 12M/32Khz or 48Mhz */ +#define CFG_NS16550_COM1 OMAP1510_UART1_BASE /* uart1 */ + +#define CONFIG_CONS_INDEX 1 +#define CONFIG_BAUDRATE 115200 +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +/*#define CONFIG_SKIP_RELOCATE_UBOOT*/ +/*#define CONFIG_SKIP_LOWLEVEL_INIT */ + +/* + * NAND flash + */ +#define CFG_MAX_NAND_DEVICE 1 +#define NAND_MAX_CHIPS 1 +#define CFG_NAND_BASE 0x04000000 + (2 << 23) + +/* + * JFFS2 partitions (mtdparts command line support) + */ +#define CONFIG_JFFS2_CMDLINE +#define MTDIDS_DEFAULT "nor0=omapflash.0,nand0=omapnand.0" +#define MTDPARTS_DEFAULT "mtdparts=omapflash.0:8k@16k(env),8k(r_env),448k@576k(u-boot);omapnand.0:48M(rootfs0),48M(rootfs1),-(data)" + +#if 0 +#define CONFIG_COMMANDS (CFG_CMD_BDI | \ + CFG_CMD_BOOTD | \ + CFG_CMD_DHCP | \ + CFG_CMD_ENV | \ + CFG_CMD_FLASH | \ + CFG_CMD_IMI | \ + CFG_CMD_LOADB | \ + CFG_CMD_NET | \ + CFG_CMD_MEMORY | \ + CFG_CMD_PING | \ + CFG_CMD_RUN) + +#else +#define CONFIG_COMMANDS (CFG_CMD_BDI | \ + CFG_CMD_BOOTD | \ + CFG_CMD_DHCP | \ + CFG_CMD_ENV | \ + CFG_CMD_FLASH | \ + CFG_CMD_NAND | \ + CFG_CMD_IMI | \ + CFG_CMD_JFFS2 | \ + CFG_CMD_LOADB | \ + CFG_CMD_NET | \ + CFG_CMD_MEMORY | \ + CFG_CMD_PING | \ + CFG_CMD_RUN) + +#define CONFIG_JFFS2_NAND 1 /* jffs2 on nand support */ +#endif + +#define CONFIG_BOOTP_MASK CONFIG_BOOTP_DEFAULT +#define CONFIG_LOOPW + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include <cmd_confdefs.h> + +#define CONFIG_BOOTDELAY 3 +#define CONFIG_ZERO_BOOTDELAY_CHECK /* allow to break in always */ +#undef CONFIG_BOOTARGS /* the boot command will set bootargs*/ +#define CFG_AUTOLOAD "n" /* No autoload */ +#define CONFIG_BOOTCOMMAND "run nboot" +#define CONFIG_PREBOOT "run setup" +#define CONFIG_EXTRA_ENV_SETTINGS \ + "setup=setenv bootargs console=ttyS0,$baudrate " \ + "$mtdparts\0" \ + "ospart=0\0" \ + "setpart=" \ + "if test -n $swapos; then " \ + "if test $ospart -eq 0; then chpart nand0,1; else chpart nand0,0; fi; "\ + "setenv swapos; saveenv; " \ + "else " \ + "chpart nand0,$ospart; " \ + "fi\0" \ + "nfsargs=setenv bootargs $bootargs " \ + "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname::off " \ + "nfsroot=$rootpath root=/dev/nfs\0" \ + "flashargs=run setpart;setenv bootargs $bootargs " \ + "root=/dev/mtdblock$partition ro " \ + "rootfstype=jffs2\0" \ + "initrdargs=setenv bootargs $bootargs " \ + "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname::off\0" \ + "iboot=bootp;run initrdargs;tftp;bootm\0" \ + "fboot=run flashargs;fsload /boot/uImage;bootm\0" \ + "nboot=bootp;run nfsargs;tftp;bootm\0" + +#if 0 /* feel free to disable for development */ +#define CONFIG_AUTOBOOT_KEYED /* Enable password protection */ +#define CONFIG_AUTOBOOT_PROMPT "\nNetStar PBX - boot in %d sec...\n" +#define CONFIG_AUTOBOOT_DELAY_STR "R" /* 1st "password" */ +#define CONFIG_BOOT_RETRY_TIME 30 +#endif + +/* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "# " /* Monitor Command Prompt */ +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_HUSH_PARSER +#define CFG_PROMPT_HUSH_PS2 "> " +#define CONFIG_AUTO_COMPLETE + +#define CFG_MEMTEST_START PHYS_SDRAM_1 +#define CFG_MEMTEST_END PHYS_SDRAM_1 + PHYS_SDRAM_1_SIZE + +#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ + +#define CFG_LOAD_ADDR PHYS_SDRAM_1 + 0x400000 /* default load address */ + +/* The 1510 has 3 timers, they can be driven by the RefClk (12Mhz) or by DPLL1. + * This time is further subdivided by a local divisor. + */ +#define CFG_TIMERBASE OMAP1510_TIMER1_BASE +#define CFG_PVT 7 /* 2^(pvt+1), divide by 256 */ +#define CFG_HZ ((CONFIG_SYS_CLK_FREQ)/(2 << CFG_PVT)) + +#define OMAP5910_DPLL_DIV 1 +#define OMAP5910_DPLL_MUL ((CONFIG_SYS_CLK_FREQ * \ + (1 << OMAP5910_DPLL_DIV)) / CONFIG_XTAL_FREQ) + +#define OMAP5910_ARM_PER_DIV 2 /* CKL/4 */ +#define OMAP5910_LCD_DIV 2 /* CKL/4 */ +#define OMAP5910_ARM_DIV 0 /* CKL/1 */ +#define OMAP5910_DSP_DIV 0 /* CKL/1 */ +#define OMAP5910_TC_DIV 1 /* CKL/2 */ +#define OMAP5910_DSP_MMU_DIV 1 /* CKL/2 */ +#define OMAP5910_ARM_TIM_SEL 1 /* CKL used for MPU timers */ + +#define OMAP5910_ARM_EN_CLK 0x03d6 /* 0000 0011 1101 0110b Clock Enable */ +#define OMAP5910_ARM_CKCTL ((OMAP5910_ARM_PER_DIV) | \ + (OMAP5910_LCD_DIV << 2) | \ + (OMAP5910_ARM_DIV << 4) | \ + (OMAP5910_DSP_DIV << 6) | \ + (OMAP5910_TC_DIV << 8) | \ + (OMAP5910_DSP_MMU_DIV << 10) | \ + (OMAP5910_ARM_TIM_SEL << 12)) + +#endif /* __CONFIG_H */ diff --git a/include/configs/omap2420h4.h b/include/configs/omap2420h4.h index 12252ac129..58374616a1 100644 --- a/include/configs/omap2420h4.h +++ b/include/configs/omap2420h4.h @@ -132,6 +132,7 @@ /* * Board NAND Info. */ +#define CFG_NAND_LEGACY #define CFG_NAND_ADDR 0x04000000 /* physical address to access nand at CS0*/ #define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ diff --git a/include/configs/omap5912osk.h b/include/configs/omap5912osk.h index 605563aa0a..5db4f52beb 100644 --- a/include/configs/omap5912osk.h +++ b/include/configs/omap5912osk.h @@ -35,6 +35,9 @@ #define CONFIG_OMAP1610 1 /* 5912 is same as 1610 */ #define CONFIG_OSK_OMAP5912 1 /* a OSK Board */ +#define CONFIG_DISPLAY_CPUINFO 1 /* display cpu info (and speed) */ +#define CONFIG_DISPLAY_BOARDINFO 1 /* display board info */ + /* input clock of PLL */ /* the OMAP5912 OSK has 12MHz input clock */ #define CONFIG_SYS_CLK_FREQ 12000000 @@ -45,11 +48,13 @@ #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ #define CONFIG_SETUP_MEMORY_TAGS 1 +#define CONFIG_INITRD_TAG 1 /* Required for ramdisk support */ /* * Size of malloc() pool */ #define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024) +#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ /* * Hardware drivers @@ -142,27 +147,44 @@ * Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ -#define PHYS_SDRAM_1 0x10000000 /* SDRAM Bank #1 */ +#define PHYS_SDRAM_1 0x10000000 /* SDRAM Bank #1 */ #define PHYS_SDRAM_1_SIZE 0x02000000 /* 32 MB */ -#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ +#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ +#define PHYS_FLASH_2 0x01000000 /* Flash Bank #2 */ + +#define CFG_FLASH_BASE PHYS_FLASH_1 -#define CFG_FLASH_BASE PHYS_FLASH_1 +#define CFG_MONITOR_BASE CFG_FLASH_BASE /* Monitor at beginning of flash */ /*----------------------------------------------------------------------- - * FLASH and environment organization + * FLASH driver setup */ -#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CFG_FLASH_CFI 1 /* Flash memory is CFI compliant */ +#define CFG_FLASH_CFI_DRIVER 1 /* Use drivers/cfi_flash.c */ + +#define CFG_FLASH_BANKS_LIST { PHYS_FLASH_1, PHYS_FLASH_2 } + +#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */ #define PHYS_FLASH_SIZE 0x02000000 /* 32MB */ #define CFG_MAX_FLASH_SECT (259) /* max number of sectors on one chip */ -/* addr of environment */ -#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x020000) + +#define CFG_FLASH_USE_BUFFER_WRITE 1 /* Use buffered writes (~10x faster) */ +#define CFG_FLASH_PROTECTION 1 /* Use hardware sector protection */ + +#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ /* timeout values are in ticks */ #define CFG_FLASH_ERASE_TOUT (20*CFG_HZ) /* Timeout for Flash Erase */ #define CFG_FLASH_WRITE_TOUT (20*CFG_HZ) /* Timeout for Flash Write */ +/*----------------------------------------------------------------------- + * FLASH and environment organization + */ #define CFG_ENV_IS_IN_FLASH 1 +/* addr of environment */ +#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x020000) + #define CFG_ENV_SIZE 0x20000 /* Total Size of Environment Sector */ #define CFG_ENV_OFFSET 0x20000 /* environment starts here */ diff --git a/include/configs/p3p440.h b/include/configs/p3p440.h index 831d018e2d..aa0901f3ff 100644 --- a/include/configs/p3p440.h +++ b/include/configs/p3p440.h @@ -1,5 +1,5 @@ /* - * (C) Copyright 2005 + * (C) Copyright 2005-2006 * Stefan Roese, DENX Software Engineering, sr@denx.de. * * (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com> @@ -71,9 +71,10 @@ * DDR SDRAM *----------------------------------------------------------------------*/ #define CONFIG_SDRAM_BANK0 1 /* init onboard DDR SDRAM bank 0*/ -#define CFG_SDRAM_TABLE { \ - {(256 << 20), 0x000C4001}, /* 256MB mode 3, 13x10(4) */ \ - {(64 << 20), 0x00082001}} /* 64MB mode 2, 12x9(4) */ +#define CONFIG_SDRAM_ECC /* enable ECC support */ +#define CFG_SDRAM_TABLE { \ + {(256 << 20), 13, 0x000C4001}, /* 256MB mode 3, 13x10(4)*/ \ + {(64 << 20), 12, 0x00082001}} /* 64MB mode 2, 12x9(4) */ /*----------------------------------------------------------------------- * Serial Port @@ -146,6 +147,7 @@ "cp.b 100000 fffc0000 40000;" \ "setenv filesize;saveenv\0" \ "upd=run load;run update\0" \ + "unlock=yes\0" \ "" #define CONFIG_BOOTCOMMAND "run net_nfs" @@ -275,6 +277,9 @@ #define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ #define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ +#define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */ +#define CFG_FLASH_PROTECTION 1 /* use hardware flash protection */ + #define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ #define CFG_FLASH_QUIET_TEST 1 /* don't warn upon unknown flash */ diff --git a/include/configs/pcs440ep.h b/include/configs/pcs440ep.h new file mode 100644 index 0000000000..50c1c4fd4c --- /dev/null +++ b/include/configs/pcs440ep.h @@ -0,0 +1,412 @@ +/* + * (C) Copyright 2006 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/************************************************************************ + * pcs440ep.h - configuration for PCS440EP board + ***********************************************************************/ +#ifndef __CONFIG_H +#define __CONFIG_H + +/*----------------------------------------------------------------------- + * High Level Configuration Options + *----------------------------------------------------------------------*/ +#define CONFIG_PCS440EP 1 /* Board is PCS440EP */ +#define CONFIG_440EP 1 /* Specific PPC440EP support */ +#define CONFIG_4xx 1 /* ... PPC4xx family */ +#define CONFIG_SYS_CLK_FREQ 33333333 /* external freq to pll */ + +#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ +#define CONFIG_MISC_INIT_R 1 /* call misc_init_r() */ + +/*----------------------------------------------------------------------- + * Base addresses -- Note these are effective addresses where the + * actual resources get mapped (not physical addresses) + *----------------------------------------------------------------------*/ +#define CFG_MONITOR_LEN (384 * 1024) /* Reserve 384 kB for Monitor */ +#define CFG_MALLOC_LEN (256 * 1024) /* Reserve 256 kB for malloc() */ +#define CFG_MONITOR_BASE (-CFG_MONITOR_LEN) +#define CFG_SDRAM_BASE 0x00000000 /* _must_ be 0 */ +#define CFG_FLASH_BASE 0xfff00000 /* start of FLASH */ +#define CFG_PCI_MEMBASE 0xa0000000 /* mapped pci memory*/ +#define CFG_PCI_MEMBASE1 CFG_PCI_MEMBASE + 0x10000000 +#define CFG_PCI_MEMBASE2 CFG_PCI_MEMBASE1 + 0x10000000 +#define CFG_PCI_MEMBASE3 CFG_PCI_MEMBASE2 + 0x10000000 + +/*Don't change either of these*/ +#define CFG_PERIPHERAL_BASE 0xef600000 /* internal peripherals*/ +#define CFG_PCI_BASE 0xe0000000 /* internal PCI regs*/ +/*Don't change either of these*/ + +#define CFG_USB_DEVICE 0x50000000 +#define CFG_BOOT_BASE_ADDR 0xf0000000 + +/*----------------------------------------------------------------------- + * Initial RAM & stack pointer (placed in SDRAM) + *----------------------------------------------------------------------*/ +#define CFG_INIT_RAM_ADDR 0x70000000 /* DCache */ +#define CFG_INIT_RAM_END (8 << 10) +#define CFG_GBL_DATA_SIZE 256 /* num bytes initial data*/ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET + +/*----------------------------------------------------------------------- + * Serial Port + *----------------------------------------------------------------------*/ +#undef CFG_EXT_SERIAL_CLOCK /* no external clk used */ +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SERIAL_MULTI 1 +/*define this if you want console on UART1*/ +#undef CONFIG_UART1_CONSOLE + +#define CFG_BAUDRATE_TABLE \ + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} + +/*----------------------------------------------------------------------- + * Environment + *----------------------------------------------------------------------*/ +#define CFG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */ + +/*----------------------------------------------------------------------- + * FLASH related + *----------------------------------------------------------------------*/ +#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 256 /* max number of sectors on one chip */ + +#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ +#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ + +#define CFG_FLASH_WORD_SIZE unsigned char /* flash word size (width) */ +#define CFG_FLASH_ADDR0 0x5555 /* 1st address for flash config cycles */ +#define CFG_FLASH_ADDR1 0x2AAA /* 2nd address for flash config cycles */ + +#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ + +#ifdef CFG_ENV_IS_IN_FLASH +#define CFG_ENV_SECT_SIZE 0x10000 /* size of one complete sector */ +#define CFG_ENV_ADDR (CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE) +#define CFG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */ + +/* Address and size of Redundant Environment Sector */ +#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR-CFG_ENV_SECT_SIZE) +#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) +#endif /* CFG_ENV_IS_IN_FLASH */ + +/*----------------------------------------------------------------------- + * DDR SDRAM + *----------------------------------------------------------------------*/ +#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for setup */ +#undef CONFIG_DDR_ECC /* don't use ECC */ +#define SPD_EEPROM_ADDRESS {0x50} + +/*----------------------------------------------------------------------- + * I2C + *----------------------------------------------------------------------*/ +#define CONFIG_HARD_I2C 1 /* I2C with hardware support */ +#undef CONFIG_SOFT_I2C /* I2C bit-banged */ +#define CFG_I2C_SPEED 100000 /* I2C speed and slave address */ +#define CFG_I2C_SLAVE 0x7F + +#define CFG_I2C_EEPROM_ADDR (0xa4>>1) +#define CFG_I2C_EEPROM_ADDR_LEN 1 +#define CFG_EEPROM_PAGE_WRITE_ENABLE +#define CFG_EEPROM_PAGE_WRITE_BITS 3 +#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 + +#define CONFIG_PREBOOT "echo;" \ + "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \ + "echo" + +#undef CONFIG_BOOTARGS + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "hostname=pcs440ep\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=${serverip}:${rootpath}\0" \ + "ramargs=setenv bootargs root=/dev/ram rw\0" \ + "addip=setenv bootargs ${bootargs} " \ + "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ + ":${hostname}:${netdev}:off panic=1\0" \ + "addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\ + "flash_nfs=run nfsargs addip addtty;" \ + "bootm ${kernel_addr}\0" \ + "flash_self=run ramargs addip addtty;" \ + "bootm ${kernel_addr} ${ramdisk_addr}\0" \ + "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \ + "bootm\0" \ + "rootpath=/opt/eldk/ppc_4xx\0" \ + "bootfile=/tftpboot/pcs440ep/uImage\0" \ + "kernel_addr=FFF00000\0" \ + "ramdisk_addr=FFF00000\0" \ + "load=tftp 100000 /tftpboot/pcs440ep/u-boot.bin\0" \ + "update=protect off FFFA0000 FFFFFFFF;era FFFA0000 FFFFFFFF;" \ + "cp.b 100000 FFFA0000 60000\0" \ + "upd=run load;run update\0" \ + "" +#define CONFIG_BOOTCOMMAND "run flash_self" + +#if 0 +#define CONFIG_BOOTDELAY -1 /* autoboot disabled */ +#else +#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ +#endif + +#define CONFIG_BAUDRATE 115200 + +#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ +#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ + +#define CONFIG_MII 1 /* MII PHY management */ +#define CONFIG_NET_MULTI 1 /* required for netconsole */ +#define CONFIG_HAS_ETH1 1 /* add support for "eth1addr" */ +#define CONFIG_PHY_ADDR 1 /* PHY address, See schematics */ +#define CONFIG_PHY1_ADDR 2 + +#define CFG_RX_ETH_BUFFER 32 /* Number of ethernet rx buffers & descriptors */ + +#define CONFIG_NETCONSOLE /* include NetConsole support */ + +/* Partitions */ +#define CONFIG_MAC_PARTITION +#define CONFIG_DOS_PARTITION +#define CONFIG_ISO_PARTITION + +#ifdef CONFIG_440EP +/* USB */ +#define CONFIG_USB_OHCI +#define CONFIG_USB_STORAGE + +/*Comment this out to enable USB 1.1 device*/ +#define USB_2_0_DEVICE +#endif /*CONFIG_440EP*/ + +#ifdef DEBUG +#define CONFIG_PANIC_HANG +#else +#define CONFIG_HW_WATCHDOG /* watchdog */ +#endif + +#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ + CFG_CMD_ASKENV | \ + CFG_CMD_DHCP | \ + CFG_CMD_DIAG | \ + CFG_CMD_EEPROM | \ + CFG_CMD_ELF | \ + CFG_CMD_I2C | \ + CFG_CMD_IRQ | \ + CFG_CMD_MII | \ + CFG_CMD_NET | \ + CFG_CMD_NFS | \ + CFG_CMD_PCI | \ + CFG_CMD_PING | \ + CFG_CMD_REGINFO | \ + CFG_CMD_SDRAM | \ + CFG_CMD_EXT2 | \ + CFG_CMD_FAT | \ + CFG_CMD_USB ) + + +#define CONFIG_SUPPORT_VFAT + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include <cmd_confdefs.h> + +/* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_MEMTEST_START 0x0400000 /* memtest works on */ +#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ + +#define CFG_LOAD_ADDR 0x100000 /* default load address */ +#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */ +#define CONFIG_LYNXKDI 1 /* support kdi files */ + +#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ + +/*----------------------------------------------------------------------- + * PCI stuff + *----------------------------------------------------------------------- + */ +/* General PCI */ +#define CONFIG_PCI /* include pci support */ +#undef CONFIG_PCI_PNP /* do (not) pci plug-and-play */ +#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ +#define CFG_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CFG_PCI_MEMBASE*/ + +/* Board-specific PCI */ +#define CFG_PCI_PRE_INIT /* enable board pci_pre_init() */ +#define CFG_PCI_TARGET_INIT +#define CFG_PCI_MASTER_INIT + +#define CFG_PCI_SUBSYS_VENDORID 0x10e8 /* AMCC */ +#define CFG_PCI_SUBSYS_ID 0xcafe /* Whatever */ + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ + +/*----------------------------------------------------------------------- + * External Bus Controller (EBC) Setup + *----------------------------------------------------------------------*/ +#define FLASH_BASE0_PRELIM 0xFFF00000 /* FLASH bank #0 */ +#define FLASH_BASE1_PRELIM 0xFFF80000 /* FLASH bank #1 */ + +#define CFG_FLASH FLASH_BASE0_PRELIM +#define CFG_SRAM 0xF1000000 +#define CFG_FPGA 0xF2000000 +#define CFG_CF1 0xF0000000 +#define CFG_CF2 0xF0100000 + +/* Memory Bank 0 (Flash Bank 0, NOR-FLASH) initialization */ +#define CFG_EBC_PB0AP 0x02010000 /* TWT=4,OEN=1 */ +#define CFG_EBC_PB0CR (CFG_FLASH | 0x18000) /* BS=1MB,BU=R/W,BW=8bit */ + +/* Memory Bank 1 (SRAM) initialization */ +#define CFG_EBC_PB1AP 0x01810040 /* TWT=3,OEN=1,BEM=1 */ +#define CFG_EBC_PB1CR (CFG_SRAM | 0x5A000) /* BS=4MB,BU=R/W,BW=16bit */ + +/* Memory Bank 2 (FPGA) initialization */ +#define CFG_EBC_PB2AP 0x01010440 /* TWT=2,OEN=1,TH=2,BEM=1 */ +#define CFG_EBC_PB2CR (CFG_FPGA | 0x5A000) /* BS=4MB,BU=R/W,BW=16bit */ + +/* Memory Bank 3 (CompactFlash) initialization */ +#define CFG_EBC_PB3AP 0x080BD400 +#define CFG_EBC_PB3CR (CFG_CF1 | 0x1A000) /* BS=1MB,BU=R/W,BW=16bit */ + +/* Memory Bank 4 (CompactFlash) initialization */ +#define CFG_EBC_PB4AP 0x080BD400 +#define CFG_EBC_PB4CR (CFG_CF2 | 0x1A000) /* BS=1MB,BU=R/W,BW=16bit */ + +/*----------------------------------------------------------------------- + * PPC440 GPIO Configuration + */ +#define CFG_440_GPIO_TABLE { /* GPIO Alternate1 Alternate2 Alternate3 */ \ +{ \ +/* GPIO Core 0 */ \ +{ GPIO0_BASE, GPIO_OUT, GPIO_SEL }, /* GPIO0 EBC_ADDR(7) DMA_REQ(2) */ \ +{ GPIO0_BASE, GPIO_OUT, GPIO_SEL }, /* GPIO1 EBC_ADDR(6) DMA_ACK(2) */ \ +{ GPIO0_BASE, GPIO_OUT, GPIO_SEL }, /* GPIO2 EBC_ADDR(5) DMA_EOT/TC(2) */ \ +{ GPIO0_BASE, GPIO_OUT, GPIO_SEL }, /* GPIO3 EBC_ADDR(4) DMA_REQ(3) */ \ +{ GPIO0_BASE, GPIO_OUT, GPIO_SEL }, /* GPIO4 EBC_ADDR(3) DMA_ACK(3) */ \ +{ GPIO0_BASE, GPIO_OUT, GPIO_SEL }, /* GPIO5 EBC_ADDR(2) DMA_EOT/TC(3) */ \ +{ GPIO0_BASE, GPIO_OUT, GPIO_ALT1 }, /* GPIO6 EBC_CS_N(1) */ \ +{ GPIO0_BASE, GPIO_OUT, GPIO_ALT1 }, /* GPIO7 EBC_CS_N(2) */ \ +{ GPIO0_BASE, GPIO_OUT, GPIO_ALT1 }, /* GPIO8 EBC_CS_N(3) */ \ +{ GPIO0_BASE, GPIO_OUT, GPIO_ALT1 }, /* GPIO9 EBC_CS_N(4) */ \ +{ GPIO0_BASE, GPIO_OUT, GPIO_SEL }, /* GPIO10 EBC_CS_N(5) */ \ +{ GPIO0_BASE, GPIO_OUT, GPIO_SEL }, /* GPIO11 EBC_BUS_ERR */ \ +{ GPIO0_BASE, GPIO_IN, GPIO_ALT1 }, /* GPIO12 ZII_p0Rxd(0) */ \ +{ GPIO0_BASE, GPIO_IN, GPIO_ALT1 }, /* GPIO13 ZII_p0Rxd(1) */ \ +{ GPIO0_BASE, GPIO_IN, GPIO_ALT1 }, /* GPIO14 ZII_p0Rxd(2) */ \ +{ GPIO0_BASE, GPIO_IN, GPIO_ALT1 }, /* GPIO15 ZII_p0Rxd(3) */ \ +{ GPIO0_BASE, GPIO_OUT, GPIO_ALT1 }, /* GPIO16 ZII_p0Txd(0) */ \ +{ GPIO0_BASE, GPIO_OUT, GPIO_ALT1 }, /* GPIO17 ZII_p0Txd(1) */ \ +{ GPIO0_BASE, GPIO_OUT, GPIO_ALT1 }, /* GPIO18 ZII_p0Txd(2) */ \ +{ GPIO0_BASE, GPIO_OUT, GPIO_ALT1 }, /* GPIO19 ZII_p0Txd(3) */ \ +{ GPIO0_BASE, GPIO_IN, GPIO_ALT1 }, /* GPIO20 ZII_p0Rx_er */ \ +{ GPIO0_BASE, GPIO_IN, GPIO_ALT1 }, /* GPIO21 ZII_p0Rx_dv */ \ +{ GPIO0_BASE, GPIO_IN, GPIO_ALT1 }, /* GPIO22 ZII_p0RxCrs */ \ +{ GPIO0_BASE, GPIO_OUT, GPIO_ALT1 }, /* GPIO23 ZII_p0Tx_er */ \ +{ GPIO0_BASE, GPIO_OUT, GPIO_ALT1 }, /* GPIO24 ZII_p0Tx_en */ \ +{ GPIO0_BASE, GPIO_IN, GPIO_ALT1 }, /* GPIO25 ZII_p0Col */ \ +{ GPIO0_BASE, GPIO_IN, GPIO_SEL }, /* GPIO26 USB2D_RXVALID */ \ +{ GPIO0_BASE, GPIO_IN, GPIO_SEL }, /* GPIO27 EXT_EBC_REQ USB2D_RXERROR */ \ +{ GPIO0_BASE, GPIO_IN, GPIO_SEL }, /* GPIO28 USB2D_TXVALID */ \ +{ GPIO0_BASE, GPIO_IN, GPIO_SEL }, /* GPIO29 EBC_EXT_HDLA USB2D_PAD_SUSPNDM */ \ +{ GPIO0_BASE, GPIO_IN, GPIO_SEL }, /* GPIO30 EBC_EXT_ACK USB2D_XCVRSELECT*/ \ +{ GPIO0_BASE, GPIO_IN, GPIO_SEL }, /* GPIO31 EBC_EXR_BUSREQ USB2D_TERMSELECT*/ \ +}, \ +{ \ +/* GPIO Core 1 */ \ +{ GPIO1_BASE, GPIO_IN, GPIO_SEL }, /* GPIO32 USB2D_OPMODE0 */ \ +{ GPIO1_BASE, GPIO_IN, GPIO_SEL }, /* GPIO33 USB2D_OPMODE1 */ \ +{ GPIO1_BASE, GPIO_OUT, GPIO_ALT3 }, /* GPIO34 UART0_DCD_N UART1_DSR_CTS_N UART2_SOUT*/ \ +{ GPIO1_BASE, GPIO_IN, GPIO_ALT3 }, /* GPIO35 UART0_8PIN_DSR_N UART1_RTS_DTR_N UART2_SIN*/ \ +{ GPIO1_BASE, GPIO_IN, GPIO_ALT1 }, /* GPIO36 UART0_8PIN_CTS_N UART3_SIN*/ \ +{ GPIO1_BASE, GPIO_OUT, GPIO_ALT1 }, /* GPIO37 UART0_RTS_N */ \ +{ GPIO1_BASE, GPIO_OUT, GPIO_ALT2 }, /* GPIO38 UART0_DTR_N UART1_SOUT */ \ +{ GPIO1_BASE, GPIO_IN, GPIO_ALT2 }, /* GPIO39 UART0_RI_N UART1_SIN */ \ +{ GPIO1_BASE, GPIO_IN, GPIO_ALT1 }, /* GPIO40 UIC_IRQ(0) */ \ +{ GPIO1_BASE, GPIO_IN, GPIO_ALT1 }, /* GPIO41 UIC_IRQ(1) */ \ +{ GPIO1_BASE, GPIO_IN, GPIO_ALT1 }, /* GPIO42 UIC_IRQ(2) */ \ +{ GPIO1_BASE, GPIO_IN, GPIO_ALT1 }, /* GPIO43 UIC_IRQ(3) */ \ +{ GPIO1_BASE, GPIO_IN, GPIO_ALT1 }, /* GPIO44 UIC_IRQ(4) DMA_ACK(1) */ \ +{ GPIO1_BASE, GPIO_IN, GPIO_SEL }, /* GPIO45 UIC_IRQ(6) DMA_EOT/TC(1) */ \ +{ GPIO1_BASE, GPIO_BI, GPIO_SEL }, /* GPIO46 UIC_IRQ(7) DMA_REQ(0) */ \ +{ GPIO1_BASE, GPIO_IN, GPIO_SEL }, /* GPIO47 UIC_IRQ(8) DMA_ACK(0) */ \ +{ GPIO1_BASE, GPIO_IN, GPIO_SEL }, /* GPIO48 UIC_IRQ(9) DMA_EOT/TC(0) */ \ +{ GPIO1_BASE, GPIO_IN, GPIO_SEL }, /* GPIO49 Unselect via TraceSelect Bit */ \ +{ GPIO1_BASE, GPIO_IN, GPIO_SEL }, /* GPIO50 Unselect via TraceSelect Bit */ \ +{ GPIO1_BASE, GPIO_IN, GPIO_SEL }, /* GPIO51 Unselect via TraceSelect Bit */ \ +{ GPIO1_BASE, GPIO_IN, GPIO_SEL }, /* GPIO52 Unselect via TraceSelect Bit */ \ +{ GPIO1_BASE, GPIO_IN, GPIO_SEL }, /* GPIO53 Unselect via TraceSelect Bit */ \ +{ GPIO1_BASE, GPIO_IN, GPIO_SEL }, /* GPIO54 Unselect via TraceSelect Bit */ \ +{ GPIO1_BASE, GPIO_IN, GPIO_SEL }, /* GPIO55 Unselect via TraceSelect Bit */ \ +{ GPIO1_BASE, GPIO_IN, GPIO_SEL }, /* GPIO56 Unselect via TraceSelect Bit */ \ +{ GPIO1_BASE, GPIO_IN, GPIO_SEL }, /* GPIO57 Unselect via TraceSelect Bit */ \ +{ GPIO1_BASE, GPIO_IN, GPIO_SEL }, /* GPIO58 Unselect via TraceSelect Bit */ \ +{ GPIO1_BASE, GPIO_IN, GPIO_SEL }, /* GPIO59 Unselect via TraceSelect Bit */ \ +{ GPIO1_BASE, GPIO_IN, GPIO_SEL }, /* GPIO60 Unselect via TraceSelect Bit */ \ +{ GPIO1_BASE, GPIO_IN, GPIO_SEL }, /* GPIO61 Unselect via TraceSelect Bit */ \ +{ GPIO1_BASE, GPIO_IN, GPIO_SEL }, /* GPIO62 Unselect via TraceSelect Bit */ \ +{ GPIO1_BASE, GPIO_IN, GPIO_SEL }, /* GPIO63 Unselect via TraceSelect Bit */ \ +} \ +} + +/*----------------------------------------------------------------------- + * Cache Configuration + */ +#define CFG_DCACHE_SIZE (32<<10) /* For AMCC 440 CPUs */ +#define CFG_CACHELINE_SIZE 32 /* ... */ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#endif + +/* + * Internal Definitions + * + * Boot Flags + */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ +#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ +#endif + +#endif /* __CONFIG_H */ diff --git a/include/configs/pdnb3.h b/include/configs/pdnb3.h new file mode 100644 index 0000000000..ba6b113d8c --- /dev/null +++ b/include/configs/pdnb3.h @@ -0,0 +1,307 @@ +/* + * (C) Copyright 2006 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * Configuation settings for the PDNB3 board. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Configuration Options + * (easy to change) + */ +#define CONFIG_IXP425 1 /* This is an IXP425 CPU */ +#define CONFIG_PDNB3 1 /* on an PDNB3 board */ + +#define CONFIG_DISPLAY_CPUINFO 1 /* display cpu info (and speed) */ +#define CONFIG_DISPLAY_BOARDINFO 1 /* display board info */ + +/* + * Ethernet + */ +#define CONFIG_IXP4XX_NPE 1 /* include IXP4xx NPE support */ +#define CONFIG_NET_MULTI 1 +#define CONFIG_PHY_ADDR 16 /* NPE0 PHY address */ +#define CONFIG_HAS_ETH1 +#define CONFIG_PHY1_ADDR 18 /* NPE1 PHY address */ +#define CONFIG_MII 1 /* MII PHY management */ +#define CFG_RX_ETH_BUFFER 16 /* Number of ethernet rx buffers & descriptors */ + +/* + * Misc configuration options + */ +#define CONFIG_USE_IRQ 1 /* we need IRQ stuff for timer */ + +#define CONFIG_BOOTCOUNT_LIMIT /* support for bootcount limit */ +#define CFG_BOOTCOUNT_ADDR 0x60003000 /* inside qmrg sram */ + +#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS 1 +#define CONFIG_INITRD_TAG 1 + +/* + * Size of malloc() pool + */ +#define CFG_MALLOC_LEN (1 << 20) +#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ + +/* allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE + +#define CONFIG_BAUDRATE 115200 +#define CFG_IXP425_CONSOLE IXP425_UART1 /* we use UART1 for console */ + +#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ + CFG_CMD_DHCP | \ + CFG_CMD_DATE | \ + CFG_CMD_NET | \ + CFG_CMD_MII | \ + CFG_CMD_NAND | \ + CFG_CMD_I2C | \ + CFG_CMD_ELF | \ + CFG_CMD_PING) + +/* This must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +/* These are u-boot generic parameters */ +#include <cmd_confdefs.h> + +#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ +#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ + +/* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_MEMTEST_START 0x00400000 /* memtest works on */ +#define CFG_MEMTEST_END 0x00800000 /* 4 ... 8 MB in DRAM */ +#define CFG_LOAD_ADDR 0x00010000 /* default load address */ + +#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ +#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ + /* valid baudrates */ +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +/* + * Stack sizes + * + * The stack sizes are set up in start.S using the settings below + */ +#define CONFIG_STACKSIZE (128*1024) /* regular stack */ +#ifdef CONFIG_USE_IRQ +#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ +#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ +#endif + +/*************************************************************** + * Platform/Board specific defines start here. + ***************************************************************/ + +/*----------------------------------------------------------------------- + * Default configuration (environment varibles...) + *----------------------------------------------------------------------*/ +#define CONFIG_PREBOOT "echo;" \ + "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \ + "echo" + +#undef CONFIG_BOOTARGS + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "hostname=pdnb3\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=${serverip}:${rootpath}\0" \ + "ramargs=setenv bootargs root=/dev/ram rw\0" \ + "addip=setenv bootargs ${bootargs} ethaddr=${ethaddr} " \ + "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ + ":${hostname}:${netdev}:off panic=1\0" \ + "addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate} " \ + "mtdparts=${mtdparts}\0" \ + "flash_nfs=run nfsargs addip addtty;" \ + "bootm ${kernel_addr}\0" \ + "flash_self=run ramargs addip addtty;" \ + "bootm ${kernel_addr} ${ramdisk_addr}\0" \ + "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \ + "bootm\0" \ + "rootpath=/opt/buildroot\0" \ + "bootfile=/tftpboot/netbox/uImage\0" \ + "kernel_addr=50080000\0" \ + "ramdisk_addr=50200000\0" \ + "load=tftp 100000 /tftpboot/netbox/u-boot.bin\0" \ + "update=protect off 50000000 5007dfff;era 50000000 5007dfff;" \ + "cp.b 100000 50000000 ${filesize};" \ + "setenv filesize;saveenv\0" \ + "upd=run load;run update\0" \ + "ipaddr=10.0.0.233\0" \ + "serverip=10.0.0.152\0" \ + "netmask=255.255.0.0\0" \ + "ethaddr=c6:6f:13:36:f3:81\0" \ + "eth1addr=c6:6f:13:36:f3:82\0" \ + "mtdparts=IXP4XX-Flash.0:504k@0(uboot),4k@504k(env)," \ + "4k@508k(renv)\0" \ + "" +#define CONFIG_BOOTCOMMAND "run net_nfs" + +/* + * Physical Memory Map + */ +#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ +#define PHYS_SDRAM_1 0x00000000 /* SDRAM Bank #1 */ +#define PHYS_SDRAM_1_SIZE 0x02000000 /* 32 MB */ + +#define CFG_FLASH_BASE 0x50000000 +#define CFG_MONITOR_BASE CFG_FLASH_BASE +#define CFG_MONITOR_LEN (504 << 10) /* Reserve 512 kB for Monitor */ + +/* + * Expansion bus settings + */ +#define CFG_EXP_CS0 0x94913C43 /* 8bit, max size */ +#define CFG_EXP_CS1 0x85000043 /* 8bit, 512bytes */ + +/* + * SDRAM settings + */ +#define CFG_SDR_CONFIG 0x18 +#define CFG_SDR_MODE_CONFIG 0x1 +#define CFG_SDRAM_REFRESH_CNT 0x81a + +/* + * FLASH and environment organization + */ +#define FLASH_BASE0_PRELIM CFG_FLASH_BASE /* FLASH bank #0 */ + +#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 256 /* max number of sectors on one chip */ + +#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ +#define CFG_FLASH_WRITE_TOUT 1000 /* Timeout for Flash Write (in ms) */ + +#define CFG_FLASH_WORD_SIZE unsigned char /* flash word size (width) */ +#define CFG_FLASH_ADDR0 0x5555 /* 1st address for flash config cycles */ +#define CFG_FLASH_ADDR1 0x2AAA /* 2nd address for flash config cycles */ +/* + * The following defines are added for buggy IOP480 byte interface. + * All other boards should use the standard values (CPCI405 etc.) + */ +#define CFG_FLASH_READ0 0x0000 /* 0 is standard */ +#define CFG_FLASH_READ1 0x0001 /* 1 is standard */ +#define CFG_FLASH_READ2 0x0002 /* 2 is standard */ + +#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ + +#define CFG_ENV_IS_IN_FLASH 1 + +#define CFG_ENV_SECT_SIZE 0x1000 /* size of one complete sector */ +#define CFG_ENV_ADDR (CFG_FLASH_BASE + CFG_MONITOR_LEN) +#define CFG_ENV_SIZE 0x1000 /* Total Size of Environment Sector */ + +/* Address and size of Redundant Environment Sector */ +#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR + CFG_ENV_SECT_SIZE) +#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) + +/* + * NAND-FLASH stuff + */ +#define CFG_MAX_NAND_DEVICE 1 +#define NAND_MAX_CHIPS 1 +#define CFG_NAND_BASE 0x51000000 /* NAND FLASH Base Address */ + +/* + * GPIO settings + */ + +/* FPGA program pin configuration */ +#define CFG_GPIO_PRG 12 /* FPGA program pin (cpu output)*/ +#define CFG_GPIO_CLK 10 /* FPGA clk pin (cpu output) */ +#define CFG_GPIO_DATA 14 /* FPGA data pin (cpu output) */ +#define CFG_GPIO_INIT 13 /* FPGA init pin (cpu input) */ +#define CFG_GPIO_DONE 11 /* FPGA done pin (cpu input) */ + +/* other GPIO's */ +#define CFG_GPIO_RESTORE_INT 0 +#define CFG_GPIO_RESTART_INT 1 +#define CFG_GPIO_SYS_RUNNING 2 +#define CFG_GPIO_PCI_INTA 3 +#define CFG_GPIO_PCI_INTB 4 +#define CFG_GPIO_I2C_SCL 6 +#define CFG_GPIO_I2C_SDA 7 +#define CFG_GPIO_FPGA_RESET 9 +#define CFG_GPIO_CLK_33M 15 + +/* + * I2C stuff + */ + +/* enable I2C and select the hardware/software driver */ +#undef CONFIG_HARD_I2C /* I2C with hardware support */ +#define CONFIG_SOFT_I2C 1 /* I2C bit-banged */ + +#define CFG_I2C_SPEED 83000 /* 83 kHz is supposed to work */ +#define CFG_I2C_SLAVE 0xFE + +/* + * Software (bit-bang) I2C driver configuration + */ +#define PB_SCL (1 << CFG_GPIO_I2C_SCL) +#define PB_SDA (1 << CFG_GPIO_I2C_SDA) + +#define I2C_INIT GPIO_OUTPUT_ENABLE(CFG_GPIO_I2C_SCL) +#define I2C_ACTIVE GPIO_OUTPUT_ENABLE(CFG_GPIO_I2C_SDA) +#define I2C_TRISTATE GPIO_OUTPUT_DISABLE(CFG_GPIO_I2C_SDA) +#define I2C_READ ((*IXP425_GPIO_GPINR & PB_SDA) != 0) +#define I2C_SDA(bit) if (bit) GPIO_OUTPUT_SET(CFG_GPIO_I2C_SDA); \ + else GPIO_OUTPUT_CLEAR(CFG_GPIO_I2C_SDA) +#define I2C_SCL(bit) if (bit) GPIO_OUTPUT_SET(CFG_GPIO_I2C_SCL); \ + else GPIO_OUTPUT_CLEAR(CFG_GPIO_I2C_SCL) +#define I2C_DELAY udelay(3) /* 1/4 I2C clock duration */ + +/* + * I2C RTC + */ +#define CONFIG_RTC_M41T11 1 +#define CFG_I2C_RTC_ADDR 0x68 +#define CFG_M41T11_BASE_YEAR 1900 /* play along with the linux driver */ + +/* + * Spartan3 FPGA configuration support + */ +#define CFG_FPGA_MAX_SIZE 700*1024 /* 700kByte for XC3S500E */ + +#define CFG_FPGA_PRG (1 << CFG_GPIO_PRG) /* FPGA program pin (cpu output)*/ +#define CFG_FPGA_CLK (1 << CFG_GPIO_CLK) /* FPGA clk pin (cpu output) */ +#define CFG_FPGA_DATA (1 << CFG_GPIO_DATA) /* FPGA data pin (cpu output) */ +#define CFG_FPGA_INIT (1 << CFG_GPIO_INIT) /* FPGA init pin (cpu input) */ +#define CFG_FPGA_DONE (1 << CFG_GPIO_DONE) /* FPGA done pin (cpu input) */ + +/* + * Cache Configuration + */ +#define CFG_CACHELINE_SIZE 32 + +#endif /* __CONFIG_H */ diff --git a/include/configs/ppmc7xx.h b/include/configs/ppmc7xx.h new file mode 100644 index 0000000000..ea15524be0 --- /dev/null +++ b/include/configs/ppmc7xx.h @@ -0,0 +1,419 @@ +/* + * ppmc7xx.h + * --------- + * + * Wind River PPMC 7xx/74xx board configuration file. + * + * By Richard Danter (richard.danter@windriver.com) + * Copyright (C) 2005 Wind River Systems + */ + + +#ifndef __CONFIG_H +#define __CONFIG_H + +#define CONFIG_PPMC7XX + + +/*=================================================================== + * + * User configurable settings - Modify to your preference + * + *=================================================================== + */ + +/* + * Debug + * + * DEBUG - Define this is you want extra debug info + * GTREGREAD - Required to build with debug + * do_bdinfo - Required to build with debug + */ + +#undef DEBUG +#define GTREGREAD(x) 0xFFFFFFFF +#define do_bdinfo(a,b,c,d) + + +/* + * CPU type + * + * CONFIG_7xx - We have a 750 or 755 CPU + * CONFIG_74xx - We have a 7400 CPU + * CONFIG_ALTIVEC - We have altivec enabled CPU (only 7400) + * CONFIG_BUS_CLK - System bus clock in Hz + */ + +#define CONFIG_7xx +#undef CONFIG_74xx +#undef CONFIG_ALTIVEC +#define CONFIG_BUS_CLK 66000000 + + +/* + * Monitor configuration + * + * CONFIG_COMMANDS - List of command sets to include in shell + * + * The following command sets have been tested and known to work: + * + * CFG_CMD_CACHE - Cache control commands + * CFG_CMD_MEMORY - Memory display, change and test commands + * CFG_CMD_FLASH - Erase and program flash + * CFG_CMD_ENV - Environment commands + * CFG_CMD_RUN - Run commands stored in env vars + * CFG_CMD_ELF - Load ELF files + * CFG_CMD_NET - Networking/file download commands + * CFG_CMD_PING - ICMP Echo Request command + * CFG_CMD_PCI - PCI Bus scanning command + */ + +#define CONFIG_COMMANDS ( (CFG_CMD_DFL & ~(CFG_CMD_KGDB)) | \ + CFG_CMD_FLASH | \ + CFG_CMD_ENV | \ + CFG_CMD_RUN | \ + CFG_CMD_ELF | \ + CFG_CMD_NET | \ + CFG_CMD_PING | \ + CFG_CMD_PCI) + + +/* + * Serial configuration + * + * CONFIG_CONS_INDEX - Serial console port number (COM1) + * CONFIG_BAUDRATE - Serial speed + */ + +#define CONFIG_CONS_INDEX 1 +#define CONFIG_BAUDRATE 9600 + + +/* + * PCI config + * + * CONFIG_PCI - Enable PCI bus + * CONFIG_PCI_PNP - Enable Plug & Play support + * CONFIG_PCI_SCAN_SHOW - Enable display of devices at startup + */ + +#define CONFIG_PCI +#define CONFIG_PCI_PNP +#undef CONFIG_PCI_SCAN_SHOW + + +/* + * Network config + * + * CONFIG_NET_MULTI - Support for multiple network interfaces + * CONFIG_EEPRO100 - Intel 8255x Ethernet Controller + * CONFIG_EEPRO100_SROM_WRITE - Enable writing to network card ROM + */ + +#define CONFIG_NET_MULTI +#define CONFIG_EEPRO100 +#define CONFIG_EEPRO100_SROM_WRITE + + +/* + * Enable extra init functions + * + * CONFIG_MISC_INIT_F - Call pre-relocation init functions + * CONFIG_MISC_INIT_R - Call post relocation init functions + */ + +#undef CONFIG_MISC_INIT_F +#define CONFIG_MISC_INIT_R + + +/* + * Boot config + * + * CONFIG_BOOTCOMMAND - Command(s) to execute to auto-boot + * CONFIG_BOOTDELAY - How long to wait before auto-boot (in sec) + */ + +#define CONFIG_BOOTCOMMAND \ + "bootp;" \ + "setenv bootargs root=/dev/nfs rw nfsroot=$(serverip):$(rootpath) " \ + "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname)::off;" \ + "bootm" +#define CONFIG_BOOTDELAY 5 + + +/*=================================================================== + * + * Board configuration settings - You should not need to modify these + * + *=================================================================== + */ + + +#include <cmd_confdefs.h> + + +/* + * Memory map + * + * This board runs in a standard CHRP (Map-B) configuration. + * + * Type Start End Size Width Chip Sel + * ----------- ----------- ----------- ------- ------- -------- + * SDRAM 0x00000000 0x04000000 64MB 64b SDRAMCS0 + * User LED's 0x78000000 RCS3 + * UART 0x7C000000 RCS2 + * Mailbox 0xFF000000 RCS1 + * Flash 0xFFC00000 0xFFFFFFFF 4MB 64b RCS0 + * + * Flash sectors are laid out as follows. + * + * Sector Start End Size Comments + * ------- ----------- ----------- ------- ----------- + * 0 0xFFC00000 0xFFC3FFFF 256KB + * 1 0xFFC40000 0xFFC7FFFF 256KB + * 2 0xFFC80000 0xFFCBFFFF 256KB + * 3 0xFFCC0000 0xFFCFFFFF 256KB + * 4 0xFFD00000 0xFFD3FFFF 256KB + * 5 0xFFD40000 0xFFD7FFFF 256KB + * 6 0xFFD80000 0xFFDBFFFF 256KB + * 7 0xFFDC0000 0xFFDFFFFF 256KB + * 8 0xFFE00000 0xFFE3FFFF 256KB + * 9 0xFFE40000 0xFFE7FFFF 256KB + * 10 0xFFE80000 0xFFEBFFFF 256KB + * 11 0xFFEC0000 0xFFEFFFFF 256KB + * 12 0xFFF00000 0xFFF3FFFF 256KB U-Boot code here + * 13 0xFFF40000 0xFFF7FFFF 256KB + * 14 0xFFF80000 0xFFFBFFFF 256KB + * 15 0xFFFC0000 0xFFFDFFFF 128KB + * 16 0xFFFE0000 0xFFFE7FFF 32KB U-Boot env vars here + * 17 0xFFFE8000 0xFFFEFFFF 32KB U-Boot backup copy of env vars here + * 18 0xFFFF0000 0xFFFFFFFF 64KB + */ + + +/* + * SDRAM config - see memory map details above. + * + * CFG_SDRAM_BASE - Start address of SDRAM, this _must_ be zero! + * CFG_SDRAM_SIZE - Total size of contiguous SDRAM bank(s) + */ + +#define CFG_SDRAM_BASE 0x00000000 +#define CFG_SDRAM_SIZE 0x04000000 + + +/* + * Flash config - see memory map details above. + * + * CFG_FLASH_BASE - Start address of flash memory + * CFG_FLASH_SIZE - Total size of contiguous flash mem + * CFG_FLASH_ERASE_TOUT - Erase timeout in ms + * CFG_FLASH_WRITE_TOUT - Write timeout in ms + * CFG_MAX_FLASH_BANKS - Number of banks of flash on board + * CFG_MAX_FLASH_SECT - Number of sectors in a bank + */ + +#define CFG_FLASH_BASE 0xFFC00000 +#define CFG_FLASH_SIZE 0x00400000 +#define CFG_FLASH_ERASE_TOUT 250000 +#define CFG_FLASH_WRITE_TOUT 5000 +#define CFG_MAX_FLASH_BANKS 1 +#define CFG_MAX_FLASH_SECT 19 + + +/* + * Monitor config - see memory map details above + * + * CFG_MONITOR_BASE - Base address of monitor code + * CFG_MALLOC_LEN - Size of malloc pool (128KB) + */ + +#define CFG_MONITOR_BASE TEXT_BASE +#define CFG_MALLOC_LEN 0x20000 + + +/* + * Command shell settings + * + * CFG_BARGSIZE - Boot Argument buffer size + * CFG_BOOTMAPSZ - Size of app's mapped RAM at boot (Linux=8MB) + * CFG_CBSIZE - Console Buffer (input) size + * CFG_LOAD_ADDR - Default load address + * CFG_LONGHELP - Provide more detailed help + * CFG_MAXARGS - Number of args accepted by monitor commands + * CFG_MEMTEST_START - Start address of test to run on RAM + * CFG_MEMTEST_END - End address of RAM test + * CFG_PBSIZE - Print Buffer (output) size + * CFG_PROMPT - Prompt string + */ + +#define CFG_BARGSIZE 1024 +#define CFG_BOOTMAPSZ 0x800000 +#define CFG_CBSIZE 1024 +#define CFG_LOAD_ADDR 0x100000 +#define CFG_LONGHELP +#define CFG_MAXARGS 16 +#define CFG_MEMTEST_START 0x00040000 +#define CFG_MEMTEST_END 0x00040100 +#define CFG_PBSIZE 1024 +#define CFG_PROMPT "=> " + + +/* + * Environment config - see memory map details above + * + * CFG_ENV_IS_IN_FLASH - The env variables are stored in flash + * CFG_ENV_ADDR - Address of the sector containing env vars + * CFG_ENV_SIZE - Ammount of RAM for env vars (used to save RAM, 4KB) + * CFG_ENV_SECT_SIZE - Size of sector containing env vars (32KB) + */ + +#define CFG_ENV_IS_IN_FLASH 1 +#define CFG_ENV_ADDR 0xFFFE0000 +#define CFG_ENV_SIZE 0x1000 +#define CFG_ENV_ADDR_REDUND 0xFFFE8000 +#define CFG_ENV_SIZE_REDUND 0x1000 +#define CFG_ENV_SECT_SIZE 0x8000 + + +/* + * Initial RAM config + * + * Since the main system RAM is initialised very early, we place the INIT_RAM + * in the main system RAM just above the exception vectors. The contents are + * copied to top of RAM by the init code. + * + * CFG_INIT_RAM_ADDR - Address of Init RAM, above exception vect + * CFG_INIT_RAM_END - Size of Init RAM + * CFG_GBL_DATA_SIZE - Ammount of RAM to reserve for global data + * CFG_GBL_DATA_OFFSET - Start of global data, top of stack + */ + +#define CFG_INIT_RAM_ADDR (CFG_SDRAM_BASE + 0x4000) +#define CFG_INIT_RAM_END 0x4000 +#define CFG_GBL_DATA_SIZE 128 +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) + + +/* + * Initial BAT config + * + * BAT0 - System SDRAM + * BAT1 - LED's and Serial Port + * BAT2 - PCI Memory + * BAT3 - PCI I/O including Flash Memory + */ + +#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) +#define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_64M | BATU_VS | BATU_VP) +#define CFG_DBAT0L CFG_IBAT0L +#define CFG_DBAT0U CFG_IBAT0U + +#define CFG_IBAT1L (0x70000000 | BATL_PP_RW | BATL_CACHEINHIBIT) +#define CFG_IBAT1U (0x70000000 | BATU_BL_256M | BATU_VS | BATU_VP) +#define CFG_DBAT1L (0x70000000 | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CFG_DBAT1U (0x70000000 | BATU_BL_256M | BATU_VS | BATU_VP) + +#define CFG_IBAT2L (0x80000000 | BATL_PP_RW | BATL_CACHEINHIBIT) +#define CFG_IBAT2U (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP) +#define CFG_DBAT2L (0x80000000 | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CFG_DBAT2U (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP) + +#define CFG_IBAT3L (0xF0000000 | BATL_PP_RW | BATL_CACHEINHIBIT) +#define CFG_IBAT3U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP) +#define CFG_DBAT3L (0xF0000000 | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CFG_DBAT3U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP) + + +/* + * Cache config + * + * CFG_CACHELINE_SIZE - Size of a cache line (CPU specific) + * CFG_L2 - L2 cache enabled if defined + * L2_INIT - L2 cache init flags + * L2_ENABLE - L2 cache enable flags + */ + +#define CFG_CACHELINE_SIZE 32 +#undef CFG_L2 +#define L2_INIT 0 +#define L2_ENABLE 0 + + +/* + * Clocks config + * + * CFG_BUS_HZ - Bus clock frequency in Hz + * CFG_BUS_CLK - As above (?) + * CFG_HZ - Decrementer freq in Hz + */ + +#define CFG_BUS_HZ CONFIG_BUS_CLK +#define CFG_BUS_CLK CONFIG_BUS_CLK +#define CFG_HZ 1000 + + +/* + * Serial port config + * + * CFG_BAUDRATE_TABLE - List of valid baud rates + * CFG_NS16550 - Include the NS16550 driver + * CFG_NS16550_SERIAL - Include the serial (wrapper) driver + * CFG_NS16550_CLK - Frequency of reference clock + * CFG_NS16550_REG_SIZE - 64-bit accesses to 8-bit port + * CFG_NS16550_COM1 - Base address of 1st serial port + */ + +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } +#define CFG_NS16550 +#define CFG_NS16550_SERIAL +#define CFG_NS16550_CLK 3686400 +#define CFG_NS16550_REG_SIZE -8 +#define CFG_NS16550_COM1 0x7C000000 + + +/* + * PCI Config - Address Map B (CHRP) + */ + +#define CFG_PCI_MEMORY_BUS 0x00000000 +#define CFG_PCI_MEMORY_PHYS 0x00000000 +#define CFG_PCI_MEMORY_SIZE 0x40000000 +#define CFG_PCI_MEM_BUS 0x80000000 +#define CFG_PCI_MEM_PHYS 0x80000000 +#define CFG_PCI_MEM_SIZE 0x7D000000 +#define CFG_ISA_MEM_BUS 0x00000000 +#define CFG_ISA_MEM_PHYS 0xFD000000 +#define CFG_ISA_MEM_SIZE 0x01000000 +#define CFG_PCI_IO_BUS 0x00800000 +#define CFG_PCI_IO_PHYS 0xFE800000 +#define CFG_PCI_IO_SIZE 0x00400000 +#define CFG_ISA_IO_BUS 0x00000000 +#define CFG_ISA_IO_PHYS 0xFE000000 +#define CFG_ISA_IO_SIZE 0x00800000 +#define CFG_ISA_IO_BASE_ADDRESS CFG_ISA_IO_PHYS +#define CFG_ISA_IO CFG_ISA_IO_PHYS +#define CFG_60X_PCI_IO_OFFSET CFG_ISA_IO_PHYS + + +/* + * Extra init functions + * + * CFG_BOARD_ASM_INIT - Call assembly init code + */ + +#define CFG_BOARD_ASM_INIT + + +/* + * Boot flags + * + * BOOTFLAG_COLD - Indicates a power-on boot + * BOOTFLAG_WARM - Indicates a software reset + */ + +#define BOOTFLAG_COLD 0x01 +#define BOOTFLAG_WARM 0x02 + + +#endif /* __CONFIG_H */ diff --git a/include/configs/ppmc8260.h b/include/configs/ppmc8260.h index 7579222102..d671dccc19 100644 --- a/include/configs/ppmc8260.h +++ b/include/configs/ppmc8260.h @@ -279,7 +279,6 @@ #define CONFIG_COMMANDS (((CONFIG_CMD_DFL & ~(CFG_CMD_KGDB))) | \ CFG_CMD_ELF | \ CFG_CMD_ASKENV | \ - CFG_CMD_ECHO | \ CFG_CMD_REGINFO | \ CFG_CMD_MEMTEST | \ CFG_CMD_MII | \ diff --git a/include/configs/r5200.h b/include/configs/r5200.h new file mode 100644 index 0000000000..e1e406bf9b --- /dev/null +++ b/include/configs/r5200.h @@ -0,0 +1,169 @@ +/* + * Configuation settings for the R5200 board + * + * (C) Copyright 2006 Lab X Technologies <zachary.landau@labxtechnologies.com> + * Based on Motorola MC5272C3 board config + * (C) Copyright 2003 Josef Baumgartner <josef.baumgartner@telex.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * board/config.h - configuration options, board specific + */ + +#ifndef _R5200_H +#define _R5200_H + +/* + * High Level Configuration Options + * (easy to change) + */ +#define CONFIG_MCF52x2 /* define processor family */ +#define CONFIG_M5271 /* define processor type */ +#define CONFIG_R5200 /* define board type */ + +#define FEC_ENET +#define CONFIG_NET_RETRY_COUNT 5 + +#define CONFIG_IPADDR 192.168.0.172 +#define CONFIG_SERVERIP 192.168.0.148 +#define CONFIG_ETHADDR 00:06:3b:00:44:55 + +#define CONFIG_BAUDRATE 19200 +#define CFG_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 } + +#define CONFIG_WATCHDOG +#define CONFIG_WATCHDOG_TIMEOUT 0xFFFF /* clock modulus */ + +/* Configuration for environment + * Environment is embedded in u-boot in the second sector of the flash + */ +#ifndef CONFIG_MONITOR_IS_IN_RAM +#define CFG_ENV_OFFSET 0x20000 +#define CFG_ENV_SECT_SIZE 0x20000 +#define CFG_ENV_IS_IN_FLASH 1 +#define CFG_ENV_IS_EMBEDDED 1 +#else +#define CFG_ENV_ADDR 0xf0020000 +#define CFG_ENV_SECT_SIZE 0x2000 +#define CFG_ENV_IS_IN_FLASH 1 +#endif + +#define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_PING | CFG_CMD_NET ) & ~(CFG_CMD_LOADS | CFG_CMD_LOADB)) + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include <cmd_confdefs.h> + +/* Note: We only copy one sectors worth of application code from location + * 10200000 for speed purposes. Increase the size if necessary */ +#define CONFIG_BOOTCOMMAND "cp.b 10200000 0 20000; go 400" +#define CONFIG_BOOTDELAY 1 + +#define CFG_PROMPT "u-boot> " +#define CFG_LONGHELP /* undef to save memory */ + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_LOAD_ADDR 0x00002000 + +#define CFG_MEMTEST_START 0x400 +#define CFG_MEMTEST_END 0x380000 + +#define CFG_HZ 1000000 +#define CFG_CLK 100000000 + +/* + * Low Level Configuration Settings + * (address mappings, register initial values, etc.) + * You should know what you are doing if you make changes here. + */ + +#define CFG_MBAR 0x40000000 /* Register Base Addrs */ + +#define CFG_ENET_BD_BASE 0x480000 + +/*----------------------------------------------------------------------- + * Definitions for initial stack pointer and data area (in DPRAM) + */ +#define CFG_INIT_RAM_ADDR 0x20000000 +#define CFG_INIT_RAM_END 0x1000 /* End of used area in internal SRAM */ +#define CFG_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET + +/*----------------------------------------------------------------------- + * Start addresses for the final memory configuration + * (Set up by the startup code) + * Please note that CFG_SDRAM_BASE _must_ start at 0 + */ +#define CFG_SDRAM_BASE 0x00000000 +#define CFG_SDRAM_SIZE 8 /* SDRAM size in MB */ +#define CFG_FLASH_BASE 0x10000000 + +#ifdef CONFIG_MONITOR_IS_IN_RAM +#define CFG_MONITOR_BASE 0x20000 +#else +#define CFG_MONITOR_BASE (CFG_FLASH_BASE + 0x400) +#endif + +#define CFG_MONITOR_LEN 0x20001 +#define CFG_MALLOC_LEN (256 << 10) +#define CFG_BOOTPARAMS_LEN 64*1024 + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization ?? + */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ + +/*----------------------------------------------------------------------- + * FLASH organization + */ +#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 1024 /* max number of sectors on one chip */ +#define CFG_FLASH_ERASE_TOUT 1000 + +#define CFG_FLASH_CFI 1 +#define CFG_FLASH_CFI_DRIVER 1 +#define CFG_FLASH_SIZE 0x800000 + +/*----------------------------------------------------------------------- + * Cache Configuration + */ +#define CFG_CACHELINE_SIZE 16 + +/*----------------------------------------------------------------------- + * Memory bank definitions + */ + +/*----------------------------------------------------------------------- + * Port configuration + */ +#define CFG_FECI2C 0xF0 + +#endif /* _R5200_H */ diff --git a/include/configs/sacsng.h b/include/configs/sacsng.h index 4e0cfdb4c3..97b52fa1ae 100644 --- a/include/configs/sacsng.h +++ b/include/configs/sacsng.h @@ -507,7 +507,6 @@ # define CONFIG_COMMANDS (((CONFIG_CMD_DFL & ~(CFG_CMD_KGDB))) | \ CFG_CMD_ELF | \ CFG_CMD_ASKENV | \ - CFG_CMD_ECHO | \ CFG_CMD_I2C | \ CFG_CMD_SPI | \ CFG_CMD_SDRAM | \ @@ -520,7 +519,6 @@ # define CONFIG_COMMANDS (((CONFIG_CMD_DFL & ~(CFG_CMD_KGDB))) | \ CFG_CMD_ELF | \ CFG_CMD_ASKENV | \ - CFG_CMD_ECHO | \ CFG_CMD_I2C | \ CFG_CMD_SPI | \ CFG_CMD_SDRAM | \ diff --git a/include/configs/sbc8260.h b/include/configs/sbc8260.h index 180ce057d7..9cf0654be1 100644 --- a/include/configs/sbc8260.h +++ b/include/configs/sbc8260.h @@ -448,7 +448,6 @@ #ifdef CONFIG_ETHER_ON_FCC # define CONFIG_COMMANDS (((CONFIG_CMD_DFL & ~(CFG_CMD_KGDB))) | \ CFG_CMD_ASKENV | \ - CFG_CMD_ECHO | \ CFG_CMD_ELF | \ CFG_CMD_I2C | \ CFG_CMD_IMMAP | \ @@ -459,7 +458,6 @@ #else # define CONFIG_COMMANDS (((CONFIG_CMD_DFL & ~(CFG_CMD_KGDB))) | \ CFG_CMD_ASKENV | \ - CFG_CMD_ECHO | \ CFG_CMD_ELF | \ CFG_CMD_I2C | \ CFG_CMD_IMMAP | \ diff --git a/include/configs/smmaco4.h b/include/configs/smmaco4.h new file mode 100644 index 0000000000..e106b3b574 --- /dev/null +++ b/include/configs/smmaco4.h @@ -0,0 +1,373 @@ +/* + * (C) Copyright 2003-2006 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * (C) Copyright 2004-2005 + * Martin Krause, TQ-Systems GmbH, martin.krause@tqs.de + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Configuration Options + * (easy to change) + */ + +#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */ +#define CONFIG_MPC5200 1 /* (more precisely an MPC5200 CPU) */ +#define CONFIG_TQM5200 1 /* ... on TQM5200 module */ +#undef CONFIG_TQM5200_REV100 /* define for revision 100 modules */ + +#define CFG_MPC5XXX_CLKIN 33000000 /* ... running at 33.000000MHz */ + +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#endif + +/* + * Serial console configuration + */ +#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */ +#define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */ +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } + +/* Partitions */ +#define CONFIG_MAC_PARTITION +#define CONFIG_DOS_PARTITION +#define CONFIG_ISO_PARTITION + +/* POST support */ +#define CONFIG_POST (CFG_POST_MEMORY | \ + CFG_POST_CPU | \ + CFG_POST_I2C) + +#ifdef CONFIG_POST +#define CFG_CMD_POST_DIAG CFG_CMD_DIAG +/* preserve space for the post_word at end of on-chip SRAM */ +#define MPC5XXX_SRAM_POST_SIZE MPC5XXX_SRAM_SIZE-4 +#else +#define CFG_CMD_POST_DIAG 0 +#endif + +/* + * Supported commands + */ +#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ + CFG_CMD_ASKENV | \ + CFG_CMD_DATE | \ + CFG_CMD_DHCP | \ + CFG_CMD_ECHO | \ + CFG_CMD_EEPROM | \ + CFG_CMD_I2C | \ + CFG_CMD_JFFS2 | \ + CFG_CMD_MII | \ + CFG_CMD_NFS | \ + CFG_CMD_PING | \ + CFG_CMD_POST_DIAG | \ + CFG_CMD_REGINFO | \ + CFG_CMD_SNTP ) + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include <cmd_confdefs.h> + +#define CONFIG_TIMESTAMP /* display image timestamps */ + +#if (TEXT_BASE == 0xFC000000) /* Boot low */ +# define CFG_LOWBOOT 1 +#endif + +/* + * Autobooting + */ +#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ + +#define CONFIG_PREBOOT "echo;" \ + "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \ + "echo" + +#undef CONFIG_BOOTARGS + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "rootpath=/opt/eldk/ppc_6xx\0" \ + "ramargs=setenv bootargs root=/dev/ram rw\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=${serverip}:${rootpath}\0" \ + "addip=setenv bootargs ${bootargs} " \ + "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ + ":${hostname}:${netdev}:off panic=1\0" \ + "flash_self=run ramargs addip;" \ + "bootm ${kernel_addr} ${ramdisk_addr}\0" \ + "flash_nfs=run nfsargs addip;" \ + "bootm ${kernel_addr}\0" \ + "net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \ + "bootfile=/tftpboot/smmaco4/uImage\0" \ + "load=tftp 200000 ${u-boot}\0" \ + "u-boot=/tftpboot/smmaco4/u-boot.bin\0" \ + "update=protect off FC000000 FC05FFFF;" \ + "erase FC000000 FC05FFFF;" \ + "cp.b 200000 FC000000 ${filesize};" \ + "protect on FC000000 FC05FFFF\0" \ + "" + +#define CONFIG_BOOTCOMMAND "run net_nfs" + +/* + * IPB Bus clocking configuration. + */ +#define CFG_IPBSPEED_133 /* define for 133MHz speed */ + +#if defined(CFG_IPBSPEED_133) +/* + * PCI Bus clocking configuration + * + * Actually a PCI Clock of 66 MHz is only set (in cpu_init.c) if + * CFG_IPBSPEED_133 is defined. This is because a PCI Clock of 66 MHz yet hasn't + * been tested with a IPB Bus Clock of 66 MHz. + */ +#define CFG_PCISPEED_66 /* define for 66MHz speed */ +#endif + +/* + * I2C configuration + */ +#define CONFIG_HARD_I2C 1 /* I2C with hardware support */ +#ifdef CONFIG_TQM5200_REV100 +#define CFG_I2C_MODULE 1 /* Select I2C module #1 for rev. 100 board */ +#else +#define CFG_I2C_MODULE 2 /* Select I2C module #2 for all other revs */ +#endif + +/* + * I2C clock frequency + * + * Please notice, that the resulting clock frequency could differ from the + * configured value. This is because the I2C clock is derived from system + * clock over a frequency divider with only a few divider values. U-boot + * calculates the best approximation for CFG_I2C_SPEED. However the calculated + * approximation allways lies below the configured value, never above. + */ +#define CFG_I2C_SPEED 100000 /* 100 kHz */ +#define CFG_I2C_SLAVE 0x7F + +/* + * EEPROM configuration for onboard EEPROM M24C32 (M24C64 should work + * also). For other EEPROMs configuration should be verified. On Mini-FAP the + * EEPROM (24C64) is on the same I2C address (but on other I2C bus), so the + * same configuration could be used. + */ +#define CFG_I2C_EEPROM_ADDR 0x50 /* 1010000x */ +#define CFG_I2C_EEPROM_ADDR_LEN 2 +#define CFG_EEPROM_PAGE_WRITE_BITS 5 /* =32 Bytes per write */ +#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 20 + +/* + * Flash configuration + */ +#define CFG_FLASH_BASE TEXT_BASE /* 0xFC000000 */ + +/* use CFI flash driver if no module variant is spezified */ +#define CFG_FLASH_CFI 1 /* Flash is CFI conformant */ +#define CFG_FLASH_CFI_DRIVER 1 /* Use the common driver */ +#define CFG_FLASH_BANKS_LIST { CFG_BOOTCS_START } +#define CFG_FLASH_EMPTY_INFO +#define CFG_FLASH_SIZE 0x04000000 /* 64 MByte */ +#define CFG_MAX_FLASH_SECT 512 /* max num of sects on one chip */ +#undef CFG_FLASH_USE_BUFFER_WRITE /* not supported yet for AMD */ + +#if !defined(CFG_LOWBOOT) +#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x00760000 + 0x00800000) +#else /* CFG_LOWBOOT */ +#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x00060000) +#endif /* CFG_LOWBOOT */ +#define CFG_MAX_FLASH_BANKS 1 /* max num of flash banks + (= chip selects) */ +#define CFG_FLASH_ERASE_TOUT 240000 /* Flash Erase Timeout (in ms) */ +#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */ + +/* Dynamic MTD partition support */ +#define CONFIG_JFFS2_CMDLINE +#define MTDIDS_DEFAULT "nor0=TQM5200-0" +#define MTDPARTS_DEFAULT "mtdparts=TQM5200-0:640k(firmware)," \ + "1408k(kernel)," \ + "2m(initrd)," \ + "4m(small-fs)," \ + "16m(big-fs)," \ + "8m(misc)" + +/* + * Environment settings + */ +#define CFG_ENV_IS_IN_FLASH 1 +#define CFG_ENV_SIZE 0x10000 +#define CFG_ENV_SECT_SIZE 0x20000 +#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR + CFG_ENV_SECT_SIZE) +#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) + +/* + * Memory map + */ +#define CFG_MBAR 0xF0000000 +#define CFG_SDRAM_BASE 0x00000000 +#define CFG_DEFAULT_MBAR 0x80000000 + +/* Use ON-Chip SRAM until RAM will be available */ +#define CFG_INIT_RAM_ADDR MPC5XXX_SRAM +#ifdef CONFIG_POST +/* preserve space for the post_word at end of on-chip SRAM */ +#define CFG_INIT_RAM_END MPC5XXX_SRAM_POST_SIZE +#else +#define CFG_INIT_RAM_END MPC5XXX_SRAM_SIZE +#endif + + +#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET + +#define CFG_MONITOR_BASE TEXT_BASE +#if (CFG_MONITOR_BASE < CFG_FLASH_BASE) +# define CFG_RAMBOOT 1 +#endif + +#define CFG_MONITOR_LEN (384 << 10) /* Reserve 384 kB for Monitor */ +#define CFG_MALLOC_LEN (256 << 10) /* Reserve 256 kB for malloc() */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ + +/* + * Ethernet configuration + */ +#define CONFIG_MPC5xxx_FEC 1 +/* + * Define CONFIG_FEC_10MBIT to force FEC at 10Mb + */ +/* #define CONFIG_FEC_10MBIT 1 */ +#define CONFIG_PHY_ADDR 0x00 + +/* + * GPIO configuration + * + * use pin gpio_wkup_6 as second SDRAM chip select (mem_cs1): + * Bit 0 (mask: 0x80000000): 1 + * use ALT CAN position: Bits 2-3 (mask: 0x30000000): + * 00 -> No Alternatives, CAN1/2 on PSC2 according to PSC2 setting. + * 01 -> CAN1 on I2C1, CAN2 on Tmr0/1. + * Use for REV200 STK52XX boards. Do not use with REV100 modules + * (because, there I2C1 is used as I2C bus) + * use PSC1 as UART: Bits 28-31 (mask: 0x00000007): 0100 + * use PSC2 as CAN: Bits 25:27 (mask: 0x00000030) + * 000 -> All PSC2 pins are GIOPs + * 001 -> CAN1/2 on PSC2 pins + * Use for REV100 STK52xx boards + * use PSC6: + * on STK52xx: + * use as UART. Pins PSC6_0 to PSC6_3 are used. + * Bits 9:11 (mask: 0x00700000): + * 101 -> PSC6 : Extended POST test is not available + * on MINI-FAP and TQM5200_IB: + * use PSC6_0 to PSC6_3 as GPIO: Bits 9:11 (mask: 0x00700000): + * 000 -> PSC6 could not be used as UART, CODEC or IrDA + * GPIO on PSC6_3 is used in post_hotkeys_pressed() to enable extended POST + * tests. + */ +#if defined (CONFIG_MINIFAP) +# define CFG_GPS_PORT_CONFIG 0x91000004 +#elif defined (CONFIG_STK52XX) +# if defined (CONFIG_STK52XX_REV100) +# define CFG_GPS_PORT_CONFIG 0x81500014 +# else /* STK52xx REV200 and above */ +# if defined (CONFIG_TQM5200_REV100) +# error TQM5200 REV100 not supported on STK52XX REV200 or above +# else/* TQM5200 REV200 and above */ +# define CFG_GPS_PORT_CONFIG 0x91500004 +# endif +# endif +#else /* TMQ5200 Inbetriebnahme-Board */ +# define CFG_GPS_PORT_CONFIG 0x81000004 +#endif + +/* + * RTC configuration + */ +#define CONFIG_RTC_MPC5200 1 /* use internal MPC5200 RTC */ + +/* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +/* Enable an alternate, more extensive memory test */ +#define CFG_ALT_MEMTEST + +#define CFG_MEMTEST_START 0x00100000 /* memtest works on */ +#define CFG_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */ + +#define CFG_LOAD_ADDR 0x100000 /* default load address */ + +#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ + +/* + * Enable loopw commando. This has only affect, if CFG_CMD_MEM is defined, + * which is normally part of the default commands (CFV_CMD_DFL) + */ +#define CONFIG_LOOPW + +/* + * Various low-level settings + */ +#if defined(CONFIG_MPC5200) +#define CFG_HID0_INIT HID0_ICE | HID0_ICFI +#define CFG_HID0_FINAL HID0_ICE +#else +#define CFG_HID0_INIT 0 +#define CFG_HID0_FINAL 0 +#endif + +#define CFG_BOOTCS_START CFG_FLASH_BASE +#define CFG_BOOTCS_SIZE CFG_FLASH_SIZE +#ifdef CFG_PCISPEED_66 +#define CFG_BOOTCS_CFG 0x0008DF30 /* for pci_clk = 66 MHz */ +#else +#define CFG_BOOTCS_CFG 0x0004DF30 /* for pci_clk = 33 MHz */ +#endif +#define CFG_CS0_START CFG_FLASH_BASE +#define CFG_CS0_SIZE CFG_FLASH_SIZE + +#define CFG_CS_BURST 0x00000000 +#define CFG_CS_DEADCYCLE 0x33333311 /* 1 dead cycle for flash and SM501 */ + +#define CFG_RESET_ADDRESS 0xff000000 + +#endif /* __CONFIG_H */ diff --git a/include/configs/spieval.h b/include/configs/spieval.h index 96cb6e4c7a..9ebb51e0ab 100644 --- a/include/configs/spieval.h +++ b/include/configs/spieval.h @@ -191,16 +191,6 @@ #undef CONFIG_BOOTARGS -#if defined (CONFIG_TQM5200_AA) -# define CONFIG_U_BOOT_SUFFIX "-AA\0" -#elif defined (CONFIG_TQM5200_AB) -# define CONFIG_U_BOOT_SUFFIX "-AB\0" -#elif defined (CONFIG_TQM5200_AC) -# define CONFIG_U_BOOT_SUFFIX "-AC\0" -#else -# define CONFIG_U_BOOT_SUFFIX "\0" -#endif - #define CONFIG_EXTRA_ENV_SETTINGS \ "netdev=eth0\0" \ "rootpath=/opt/eldk/ppc_6xx\0" \ @@ -217,7 +207,7 @@ "net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \ "bootfile=/tftpboot/tqm5200/uImage\0" \ "load=tftp 200000 ${u-boot}\0" \ - "u-boot=/tftpboot/tqm5200/u-boot.bin" CONFIG_U_BOOT_SUFFIX \ + "u-boot=/tftpboot/tqm5200/u-boot.bin\0" \ "update=protect off FC000000 FC05FFFF;" \ "erase FC000000 FC05FFFF;" \ "cp.b 200000 FC000000 ${filesize};" \ @@ -283,13 +273,6 @@ #endif /* List of I2C addresses to be verified by POST */ -#if defined (CONFIG_TQM5200_AA) || defined (CONFIG_TQM5200_AB) -#define I2C_ADDR_LIST { CFG_I2C_EEPROM_ADDR, \ - CFG_I2C_SLAVE } -#elif defined (CONFIG_TQM5200_AC) -#define I2C_ADDR_LIST { CFG_I2C_SLAVE } -#endif - #if defined (CONFIG_MINIFAP) #undef I2C_ADDR_LIST #define I2C_ADDR_LIST { CFG_I2C_EEPROM_ADDR, \ @@ -478,13 +461,9 @@ * SRAM - Do not map below 2 GB in address space, because this area is used * for SDRAM autosizing. */ -#if defined CONFIG_TQM5200_AB || defined (CONFIG_CS_AUTOCONF) +#if defined (CONFIG_CS_AUTOCONF) #define CFG_CS2_START 0xE5000000 -#ifdef CONFIG_TQM5200_AB -#define CFG_CS2_SIZE 0x80000 /* 512 kByte */ -#else /* CONFIG_CS_AUTOCONF */ #define CFG_CS2_SIZE 0x100000 /* 1 MByte */ -#endif #define CFG_CS2_CFG 0x0004D930 #endif @@ -492,8 +471,7 @@ * Grafic controller - Do not map below 2 GB in address space, because this * area is used for SDRAM autosizing. */ -#if defined (CONFIG_TQM5200_AB) || defined (CONFIG_TQM5200_AC) || \ - defined (CONFIG_CS_AUTOCONF) +#if defined (CONFIG_CS_AUTOCONF) #define SM501_FB_BASE 0xE0000000 #define CFG_CS1_START (SM501_FB_BASE) #define CFG_CS1_SIZE 0x4000000 /* 64 MByte */ diff --git a/include/configs/stamp.h b/include/configs/stamp.h new file mode 100644 index 0000000000..248ca70de0 --- /dev/null +++ b/include/configs/stamp.h @@ -0,0 +1,333 @@ +/* + * U-boot - stamp.h Configuration file for STAMP board + * having BF533 processor + * + * Copyright (c) 2005 blackfin.uclinux.org + * + * (C) Copyright 2000-2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_STAMP_H__ +#define __CONFIG_STAMP_H__ + +/* + * Board settings + * + */ + +#define __ADSPLPBLACKFIN__ 1 +#define __ADSPBF533__ 1 +#define CONFIG_STAMP 1 +#define CONFIG_RTC_BF533 1 + +/* FLASH/ETHERNET uses the same address range */ +#define SHARED_RESOURCES 1 + +#define CONFIG_VDSP 1 + +/* + * Clock settings + * + */ + +/* CONFIG_CLKIN_HZ is any value in Hz */ +#define CONFIG_CLKIN_HZ 11059200 +/* CONFIG_CLKIN_HALF controls what is passed to PLL 0=CLKIN */ +/* 1=CLKIN/2 */ +#define CONFIG_CLKIN_HALF 0 +/* CONFIG_PLL_BYPASS controls if the PLL is used 0=don't bypass */ +/* 1=bypass PLL */ +#define CONFIG_PLL_BYPASS 0 +/* CONFIG_VCO_MULT controls what the multiplier of the PLL is. */ +/* Values can range from 1-64 */ +#define CONFIG_VCO_MULT 45 +/* CONFIG_CCLK_DIV controls what the core clock divider is */ +/* Values can be 1, 2, 4, or 8 ONLY */ +#define CONFIG_CCLK_DIV 1 +/* CONFIG_SCLK_DIV controls what the peripheral clock divider is */ +/* Values can range from 1-15 */ +#define CONFIG_SCLK_DIV 6 + +/* + * Network Settings + */ +/* network support */ +#define CONFIG_IPADDR 192.168.0.15 +#define CONFIG_NETMASK 255.255.255.0 +#define CONFIG_GATEWAYIP 192.168.0.1 +#define CONFIG_SERVERIP 192.168.0.2 +#define CONFIG_HOSTNAME STAMP +#define CONFIG_ROOTPATH /checkout/uClinux-dist/romfs + +/* To remove hardcoding and enable MAC storage in EEPROM */ +/* #define CONFIG_ETHADDR 02:80:ad:20:31:b8 */ + +/* + * Command settings + * + */ + +#define CFG_LONGHELP 1 + +#define CONFIG_BOOTDELAY 5 +#define CONFIG_BOOT_RETRY_TIME -1 /* Enable this if bootretry required, currently its disabled */ +#define CONFIG_BOOTCOMMAND "run ramboot" +#define CONFIG_AUTOBOOT_PROMPT "autoboot in %d seconds\n" + +#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ + CFG_CMD_PING | \ + CFG_CMD_ELF | \ + CFG_CMD_I2C | \ + CFG_CMD_CACHE | \ + CFG_CMD_JFFS2 | \ + CFG_CMD_DATE) +#define CONFIG_BOOTARGS "root=/dev/mtdblock0 rw" + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "ramargs=setenv bootargs root=/dev/mtdblock0 rw\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=$(serverip):$(rootpath)\0" \ + "addip=setenv bootargs $(bootargs) " \ + "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)" \ + ":$(hostname):eth0:off\0" \ + "ramboot=tftpboot 0x1000000 linux;" \ + "run ramargs;run addip;bootelf\0" \ + "nfsboot=tftpboot 0x1000000 linux;" \ + "run nfsargs;run addip;bootelf\0" \ + "flashboot=bootm 0x20100000\0" \ + "" + +/* This must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include <cmd_confdefs.h> + +/* + * Console settings + * + */ + +#define CONFIG_BAUDRATE 57600 +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +#define CFG_PROMPT "stamp>" /* Monitor Command Prompt */ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CONFIG_LOADS_ECHO 1 + +/* + * Network settings + * + */ + +#define CONFIG_DRIVER_SMC91111 1 +#define CONFIG_SMC91111_BASE 0x20300300 +/* To remove hardcoding and enable MAC storage in EEPROM */ +/* #define HARDCODE_MAC 1 */ + +/* + * Flash settings + * + */ + +#define CFG_FLASH_CFI /* The flash is CFI compatible */ +#define CFG_FLASH_CFI_DRIVER /* Use common CFI driver */ +#define CFG_FLASH_CFI_AMD_RESET + +#define CFG_ENV_IS_IN_FLASH 1 + +#define CFG_FLASH_BASE 0x20000000 +#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 67 /* max number of sectors on one chip */ + +#define CFG_ENV_ADDR 0x20020000 +#define CFG_ENV_SIZE 0x10000 +#define CFG_ENV_SECT_SIZE 0x10000 /* Total Size of Environment Sector */ + +#define CFG_FLASH_ERASE_TOUT 30000 /* Timeout for Chip Erase (in ms) */ +#define CFG_FLASH_ERASEBLOCK_TOUT 5000 /* Timeout for Block Erase (in ms) */ +#define CFG_FLASH_WRITE_TOUT 1 /* Timeout for Flash Write (in ms) */ + +/* JFFS Partition offset set */ +#define CFG_JFFS2_FIRST_BANK 0 +#define CFG_JFFS2_NUM_BANKS 1 +/* 512k reserved for u-boot */ +#define CFG_JFFS2_FIRST_SECTOR 11 + +/* + * following timeouts shall be used once the + * Flash real protection is enabled + */ +#define CFG_FLASH_LOCK_TOUT 5 /* Timeout for Flash Set Lock Bit (in ms) */ +#define CFG_FLASH_UNLOCK_TOUT 10000 /* Timeout for Flash Clear Lock Bits (in ms) */ + +/* + * I2C settings + * By default PF2 is used as SDA and PF3 as SCL on the Stamp board + */ +#define CONFIG_SOFT_I2C 1 /* I2C bit-banged */ +/* + * Software (bit-bang) I2C driver configuration + */ +#define PF_SCL PF3 +#define PF_SDA PF2 + +#define I2C_INIT (*pFIO_DIR |= PF_SCL); asm("ssync;") +#define I2C_ACTIVE (*pFIO_DIR |= PF_SDA); *pFIO_INEN &= ~PF_SDA; asm("ssync;") +#define I2C_TRISTATE (*pFIO_DIR &= ~PF_SDA); *pFIO_INEN |= PF_SDA; asm("ssync;") +#define I2C_READ ((volatile)(*pFIO_FLAG_D & PF_SDA) != 0); asm("ssync;") +#define I2C_SDA(bit) if(bit) { \ + *pFIO_FLAG_S = PF_SDA; \ + asm("ssync;"); \ + } \ + else { \ + *pFIO_FLAG_C = PF_SDA; \ + asm("ssync;"); \ + } +#define I2C_SCL(bit) if(bit) { \ + *pFIO_FLAG_S = PF_SCL; \ + asm("ssync;"); \ + } \ + else { \ + *pFIO_FLAG_C = PF_SCL; \ + asm("ssync;"); \ + } +#define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */ + +#define CFG_I2C_SPEED 50000 +#define CFG_I2C_SLAVE 0xFE + +/* + * Compact Flash settings + */ + +/* Enabled below option for CF support */ +/* #define CONFIG_STAMP_CF 1 */ + +#if defined(CONFIG_STAMP_CF) && (CONFIG_COMMANDS & CFG_CMD_IDE) + +#define CONFIG_MISC_INIT_R 1 +#define CONFIG_DOS_PARTITION 1 + +/* + * IDE/ATA stuff + */ +#undef CONFIG_IDE_8xx_DIRECT /* no pcmcia interface required */ +#undef CONFIG_IDE_LED /* no led for ide supported */ +#undef CONFIG_IDE_RESET /* no reset for ide supported */ + +#define CFG_IDE_MAXBUS 1 /* max. 1 IDE busses */ +#define CFG_IDE_MAXDEVICE (CFG_IDE_MAXBUS*1) /* max. 1 drives per IDE bus */ + +#define CFG_ATA_BASE_ADDR 0x20200000 +#define CFG_ATA_IDE0_OFFSET 0x0000 + +#define CFG_ATA_DATA_OFFSET 0x0020 /* Offset for data I/O */ +#define CFG_ATA_REG_OFFSET 0x0020 /* Offset for normal register accesses */ +#define CFG_ATA_ALT_OFFSET 0x0007 /* Offset for alternate registers */ + +#define CFG_ATA_STRIDE 2 +#endif + +/* + * SDRAM settings + * + */ + +#define CONFIG_MEM_SIZE 128 /* 128, 64, 32, 16 */ +#define CONFIG_MEM_ADD_WDTH 11 /* 8, 9, 10, 11 */ +#define CONFIG_MEM_MT48LC64M4A2FB_7E 1 + +#define CFG_MEMTEST_START 0x00100000 /* memtest works on */ +#define CFG_MEMTEST_END 0x07EFFFFF /* 1 ... 127 MB in DRAM */ +#define CFG_LOAD_ADDR 0x01000000 /* default load address */ + +#define CFG_SDRAM_BASE 0x00000000 +#define CFG_MAX_RAM_SIZE 0x08000000 + +#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ +#define CFG_MONITOR_BASE (CFG_MAX_RAM_SIZE - CFG_MONITOR_LEN) + +#if ( CONFIG_CLKIN_HALF == 0 ) +#define CONFIG_VCO_HZ ( CONFIG_CLKIN_HZ * CONFIG_VCO_MULT ) +#else +#define CONFIG_VCO_HZ (( CONFIG_CLKIN_HZ * CONFIG_VCO_MULT ) / 2 ) +#endif + +#if (CONFIG_PLL_BYPASS == 0) +#define CONFIG_CCLK_HZ ( CONFIG_VCO_HZ / CONFIG_CCLK_DIV ) +#define CONFIG_SCLK_HZ ( CONFIG_VCO_HZ / CONFIG_SCLK_DIV ) +#else +#define CONFIG_CCLK_HZ CONFIG_CLKIN_HZ +#define CONFIG_SCLK_HZ CONFIG_CLKIN_HZ +#endif + +/* + * Miscellaneous configurable options + */ +#define CFG_HZ 1000 /* 1ms time tick */ + +#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ +#define CFG_MALLOC_BASE (CFG_MONITOR_BASE - CFG_MALLOC_LEN) +#define CFG_GBL_DATA_SIZE 0x4000 +#define CFG_GBL_DATA_ADDR (CFG_MALLOC_BASE - CFG_GBL_DATA_SIZE) +#define CONFIG_STACKBASE (CFG_GBL_DATA_ADDR - 4) + +#define CFG_LARGE_IMAGE_LEN 0x4000000 /* Large Image Length, set to 64 Meg */ + +#define CONFIG_SHOW_BOOT_PROGRESS 1 /* Show boot progress on LEDs */ + +/* + * Stack sizes + */ +#define CONFIG_STACKSIZE (128*1024) /* regular stack */ + +/* + * FLASH organization and environment definitions + */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ + +/* 0xFF, 0xBBC3BBc3, 0x99B39983 */ +/*#define AMGCTLVAL (AMBEN_P0 | AMBEN_P1 | AMBEN_P2 | AMCKEN) +#define AMBCTL0VAL (B1WAT_11 | B1RAT_11 | B1HT_3 | B1ST_4 | B1TT_4 | B1RDYPOL | \ + B1RDYEN | B0WAT_11 | B0RAT_11 | B0HT_3 | B0ST_4 | B0TT_4 | B0RDYPOL | B0RDYEN) +#define AMBCTL1VAL (B3WAT_9 | B3RAT_9 | B3HT_2 | B3ST_3 | B3TT_4 | B3RDYPOL | \ + B3RDYEN | B2WAT_9 | B2RAT_9 | B2HT_2 | B2ST_4 | B2TT_4 | B2RDYPOL | B2RDYEN) +*/ +#define AMGCTLVAL 0xFF +#define AMBCTL0VAL 0xBBC3BBC3 +#define AMBCTL1VAL 0x99B39983 +#define CF_AMBCTL1VAL 0x99B3ffc2 + +#ifdef CONFIG_VDSP +#define ET_EXEC_VDSP 0x8 +#define SHT_STRTAB_VDSP 0x1 +#define ELFSHDRSIZE_VDSP 0x2C +#define VDSP_ENTRY_ADDR 0xFFA00000 +#endif + +#endif diff --git a/include/configs/stxxtc.h b/include/configs/stxxtc.h index 3ffe6b2e05..614a046105 100644 --- a/include/configs/stxxtc.h +++ b/include/configs/stxxtc.h @@ -436,6 +436,7 @@ /****************************************************************/ /* NAND */ +#define CFG_NAND_LEGACY #define CFG_NAND_BASE NAND_BASE #define CONFIG_MTD_NAND_ECC_JFFS2 #define CONFIG_MTD_NAND_VERIFY_WRITE @@ -584,5 +585,7 @@ typedef unsigned int led_id_t; #define OF_CPU "PowerPC,MPC870@0" #define OF_TBCLK (MPC8XX_HZ / 16) +#define CONFIG_OF_HAS_BD_T 1 +#define CONFIG_OF_HAS_UBOOT_ENV 1 #endif /* __CONFIG_H */ diff --git a/include/configs/svm_sc8xx.h b/include/configs/svm_sc8xx.h index 7118f3f74b..92ee8cb333 100644 --- a/include/configs/svm_sc8xx.h +++ b/include/configs/svm_sc8xx.h @@ -141,6 +141,7 @@ /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ #include <cmd_confdefs.h> +#define CFG_NAND_LEGACY /* * Miscellaneous configurable options diff --git a/include/configs/trab.h b/include/configs/trab.h index 85ee756e05..8f71acf902 100644 --- a/include/configs/trab.h +++ b/include/configs/trab.h @@ -160,7 +160,6 @@ CFG_CMD_DATE | \ CFG_CMD_DHCP | \ CFG_CMD_FAT | \ - CFG_CMD_JFFS2 | \ CFG_CMD_NFS | \ CFG_CMD_SNTP | \ CFG_CMD_USB ) @@ -174,7 +173,6 @@ CFG_CMD_DATE | \ CFG_CMD_DHCP | \ CFG_CMD_FAT | \ - CFG_CMD_JFFS2 | \ CFG_CMD_NFS | \ CFG_CMD_SNTP | \ CFG_CMD_USB ) @@ -384,10 +382,10 @@ #define MTDIDS_DEFAULT "nor0=0" /* production flash layout */ -#define MTDPARTS_DEFAULT "mtdparts=0:32k(Firmware1)ro," \ +#define MTDPARTS_DEFAULT "mtdparts=0:16k(Firmware1)ro," \ "16k(Env1)," \ "16k(Env2)," \ - "320k(Firmware2)ro," \ + "336k(Firmware2)ro," \ "896k(Kernel)," \ "5376k(Root-FS)," \ "1408k(JFFS2)," \ diff --git a/include/configs/utx8245.h b/include/configs/utx8245.h index d312b6559a..e5d4397d2c 100644 --- a/include/configs/utx8245.h +++ b/include/configs/utx8245.h @@ -91,7 +91,6 @@ protect on ${u-boot_startaddr} ${u-boot_endaddr}" | CFG_CMD_ENV | CFG_CMD_CONSOLE \ | CFG_CMD_LOADS | CFG_CMD_LOADB \ | CFG_CMD_IMI | CFG_CMD_CACHE \ - | CFG_CMD_RUN | CFG_CMD_ECHO \ | CFG_CMD_REGINFO | CFG_CMD_NET\ | CFG_CMD_DHCP | CFG_CMD_I2C \ | CFG_CMD_DATE) diff --git a/include/configs/virtlab2.h b/include/configs/virtlab2.h new file mode 100644 index 0000000000..06d8536ec3 --- /dev/null +++ b/include/configs/virtlab2.h @@ -0,0 +1,461 @@ +/* + * (C) Copyright 2006 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * board/config.h - configuration options, board specific + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Configuration Options + * (easy to change) + */ + +#define CONFIG_MPC823 1 /* This is a MPC823 CPU */ +#define CONFIG_VIRTLAB2 1 /* ...on a virtlab2 module */ +#define CONFIG_TQM8xxL 1 + +#ifdef CONFIG_LCD /* with LCD controller ? */ +#define CONFIG_SPLASH_SCREEN /* ... with splashscreen support*/ +#endif + +#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */ +#undef CONFIG_8xx_CONS_SMC2 +#undef CONFIG_8xx_CONS_NONE +#define CONFIG_BAUDRATE 115200 /* console baudrate = 115kbps */ + +#define CONFIG_BOOTCOUNT_LIMIT + +#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ + +#define CONFIG_BOARD_TYPES 1 /* support board types */ + +#define CONFIG_PREBOOT "echo;echo Type \"run flash_nfs\" to mount root filesystem over NFS;echo" + +#undef CONFIG_BOOTARGS + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=${serverip}:${rootpath}\0" \ + "ramargs=setenv bootargs root=/dev/ram rw\0" \ + "addip=setenv bootargs ${bootargs} " \ + "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ + ":${hostname}:${netdev}:off panic=1\0" \ + "flash_nfs=run nfsargs addip;" \ + "bootm ${kernel_addr}\0" \ + "flash_self=run ramargs addip;" \ + "bootm ${kernel_addr} ${ramdisk_addr}\0" \ + "net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \ + "rootpath=/opt/eldk/ppc_8xx\0" \ + "bootfile=/tftpboot/TQM823L/uImage\0" \ + "kernel_addr=40040000\0" \ + "ramdisk_addr=40100000\0" \ + "" +#define CONFIG_BOOTCOMMAND "run flash_self" + +#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ +#undef CFG_LOADS_BAUD_CHANGE /* don't allow baudrate change */ + +#undef CONFIG_WATCHDOG /* watchdog disabled */ + +#if defined(CONFIG_LCD) +# undef CONFIG_STATUS_LED /* disturbs display */ +#else +# define CONFIG_STATUS_LED 1 /* Status LED enabled */ +#endif /* CONFIG_LCD */ + +#undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */ + +#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) + +#define CONFIG_MAC_PARTITION +#define CONFIG_DOS_PARTITION + +#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */ + +#ifdef CONFIG_SPLASH_SCREEN +# define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ + CFG_CMD_ASKENV | \ + CFG_CMD_BMP | \ + CFG_CMD_DATE | \ + CFG_CMD_DHCP | \ + CFG_CMD_IDE | \ + CFG_CMD_NFS | \ + CFG_CMD_SNTP ) +#else +# define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ + CFG_CMD_ASKENV | \ + CFG_CMD_DATE | \ + CFG_CMD_DHCP | \ + CFG_CMD_IDE | \ + CFG_CMD_NFS | \ + CFG_CMD_SNTP ) +#endif + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include <cmd_confdefs.h> + +/* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ + +#if 0 +#define CFG_HUSH_PARSER 1 /* use "hush" command parser */ +#endif +#ifdef CFG_HUSH_PARSER +#define CFG_PROMPT_HUSH_PS2 "> " +#endif + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_MEMTEST_START 0x0400000 /* memtest works on */ +#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ + +#define CFG_LOAD_ADDR 0x100000 /* default load address */ + +#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ + +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +/* + * Low Level Configuration Settings + * (address mappings, register initial values, etc.) + * You should know what you are doing if you make changes here. + */ +/*----------------------------------------------------------------------- + * Internal Memory Mapped Register + */ +#define CFG_IMMR 0xFFF00000 + +/*----------------------------------------------------------------------- + * Definitions for initial stack pointer and data area (in DPRAM) + */ +#define CFG_INIT_RAM_ADDR CFG_IMMR +#define CFG_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */ +#define CFG_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET + +/*----------------------------------------------------------------------- + * Start addresses for the final memory configuration + * (Set up by the startup code) + * Please note that CFG_SDRAM_BASE _must_ start at 0 + */ +#define CFG_SDRAM_BASE 0x00000000 +#define CFG_FLASH_BASE 0x40000000 +#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ +#define CFG_MONITOR_BASE CFG_FLASH_BASE +#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ + +/*----------------------------------------------------------------------- + * FLASH organization + */ +#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 71 /* max number of sectors on one chip */ + +#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ +#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ + +#define CFG_ENV_IS_IN_FLASH 1 +#define CFG_ENV_OFFSET 0x8000 /* Offset of Environment Sector */ +#define CFG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */ + +/* Address and size of Redundant Environment Sector */ +#define CFG_ENV_OFFSET_REDUND (CFG_ENV_OFFSET+CFG_ENV_SIZE) +#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) + +/*----------------------------------------------------------------------- + * Hardware Information Block + */ +#define CFG_HWINFO_OFFSET 0x0003FFC0 /* offset of HW Info block */ +#define CFG_HWINFO_SIZE 0x00000040 /* size of HW Info block */ +#define CFG_HWINFO_MAGIC 0x54514D38 /* 'TQM8' */ + +/*----------------------------------------------------------------------- + * Cache Configuration + */ +#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ +#endif + +/*----------------------------------------------------------------------- + * SYPCR - System Protection Control 11-9 + * SYPCR can only be written once after reset! + *----------------------------------------------------------------------- + * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze + */ +#if defined(CONFIG_WATCHDOG) +#define CFG_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \ + SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP) +#else +#define CFG_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP) +#endif + +/*----------------------------------------------------------------------- + * SIUMCR - SIU Module Configuration 11-6 + *----------------------------------------------------------------------- + * PCMCIA config., multi-function pin tri-state + */ +#ifndef CONFIG_CAN_DRIVER +#define CFG_SIUMCR (SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01) +#else /* we must activate GPL5 in the SIUMCR for CAN */ +#define CFG_SIUMCR (SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC01) +#endif /* CONFIG_CAN_DRIVER */ + +/*----------------------------------------------------------------------- + * TBSCR - Time Base Status and Control 11-26 + *----------------------------------------------------------------------- + * Clear Reference Interrupt Status, Timebase freezing enabled + */ +#define CFG_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF) + +/*----------------------------------------------------------------------- + * RTCSC - Real-Time Clock Status and Control Register 11-27 + *----------------------------------------------------------------------- + */ +#define CFG_RTCSC (RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE) + +/*----------------------------------------------------------------------- + * PISCR - Periodic Interrupt Status and Control 11-31 + *----------------------------------------------------------------------- + * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled + */ +#define CFG_PISCR (PISCR_PS | PISCR_PITF) + +/*----------------------------------------------------------------------- + * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30 + *----------------------------------------------------------------------- + * Reset PLL lock status sticky bit, timer expired status bit and timer + * interrupt status bit + */ +#define CFG_PLPRCR (PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST) + +/*----------------------------------------------------------------------- + * SCCR - System Clock and reset Control Register 15-27 + *----------------------------------------------------------------------- + * Set clock output, timebase and RTC source and divider, + * power management and some other internal clocks + */ +#define SCCR_MASK SCCR_EBDF11 +#define CFG_SCCR (SCCR_COM00 | SCCR_DFSYNC00 | SCCR_DFBRG00 | \ + SCCR_DFNL000 | SCCR_DFNH000 | SCCR_DFLCD000 | \ + SCCR_DFALCD00) + +/*----------------------------------------------------------------------- + * PCMCIA stuff + *----------------------------------------------------------------------- + * + */ +#define CFG_PCMCIA_MEM_ADDR (0xE0000000) +#define CFG_PCMCIA_MEM_SIZE ( 64 << 20 ) +#define CFG_PCMCIA_DMA_ADDR (0xE4000000) +#define CFG_PCMCIA_DMA_SIZE ( 64 << 20 ) +#define CFG_PCMCIA_ATTRB_ADDR (0xE8000000) +#define CFG_PCMCIA_ATTRB_SIZE ( 64 << 20 ) +#define CFG_PCMCIA_IO_ADDR (0xEC000000) +#define CFG_PCMCIA_IO_SIZE ( 64 << 20 ) + +/*----------------------------------------------------------------------- + * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter) + *----------------------------------------------------------------------- + */ + +#define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */ + +#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ +#undef CONFIG_IDE_LED /* LED for ide not supported */ +#undef CONFIG_IDE_RESET /* reset for ide not supported */ + +#define CFG_IDE_MAXBUS 1 /* max. 1 IDE bus */ +#define CFG_IDE_MAXDEVICE 1 /* max. 1 drive per IDE bus */ + +#define CFG_ATA_IDE0_OFFSET 0x0000 + +#define CFG_ATA_BASE_ADDR CFG_PCMCIA_MEM_ADDR + +/* Offset for data I/O */ +#define CFG_ATA_DATA_OFFSET (CFG_PCMCIA_MEM_SIZE + 0x320) + +/* Offset for normal register accesses */ +#define CFG_ATA_REG_OFFSET (2 * CFG_PCMCIA_MEM_SIZE + 0x320) + +/* Offset for alternate registers */ +#define CFG_ATA_ALT_OFFSET 0x0100 + +/*----------------------------------------------------------------------- + * + *----------------------------------------------------------------------- + * + */ +#define CFG_DER 0 + +/* + * Init Memory Controller: + * + * BR0/1 and OR0/1 (FLASH) + */ + +#define FLASH_BASE0_PRELIM 0x40000000 /* FLASH bank #0 */ +#define FLASH_BASE1_PRELIM 0x60000000 /* FLASH bank #0 */ + +/* used to re-map FLASH both when starting from SRAM or FLASH: + * restrict access enough to keep SRAM working (if any) + * but not too much to meddle with FLASH accesses + */ +#define CFG_REMAP_OR_AM 0x80000000 /* OR addr mask */ +#define CFG_PRELIM_OR_AM 0xE0000000 /* OR addr mask */ + +/* + * FLASH timing: + */ +#define CFG_OR_TIMING_FLASH (OR_ACS_DIV1 | OR_TRLX | OR_CSNT_SAM | \ + OR_SCY_3_CLK | OR_EHTR | OR_BI) + +#define CFG_OR0_REMAP (CFG_REMAP_OR_AM | CFG_OR_TIMING_FLASH) +#define CFG_OR0_PRELIM (CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH) +#define CFG_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V ) + +#define CFG_OR1_REMAP CFG_OR0_REMAP +#define CFG_OR1_PRELIM CFG_OR0_PRELIM +#define CFG_BR1_PRELIM ((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_V ) + +/* + * BR2/3 and OR2/3 (SDRAM) + * + */ +#define SDRAM_BASE2_PRELIM 0x00000000 /* SDRAM bank #0 */ +#define SDRAM_BASE3_PRELIM 0x20000000 /* SDRAM bank #1 */ +#define SDRAM_MAX_SIZE 0x04000000 /* max 64 MB per bank */ + +/* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care) */ +#define CFG_OR_TIMING_SDRAM 0x00000A00 + +#define CFG_OR2_PRELIM (CFG_PRELIM_OR_AM | CFG_OR_TIMING_SDRAM ) +#define CFG_BR2_PRELIM ((SDRAM_BASE2_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V ) + +#ifndef CONFIG_CAN_DRIVER +#define CFG_OR3_PRELIM CFG_OR2_PRELIM +#define CFG_BR3_PRELIM ((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V ) +#else /* CAN uses CS3#, so we can have only one SDRAM bank anyway */ +#define CFG_CAN_BASE 0xC0000000 /* CAN mapped at 0xC0000000 */ +#define CFG_CAN_OR_AM 0xFFFF8000 /* 32 kB address mask */ +#define CFG_OR3_CAN (CFG_CAN_OR_AM | OR_G5LA | OR_BI) +#define CFG_BR3_CAN ((CFG_CAN_BASE & BR_BA_MSK) | \ + BR_PS_8 | BR_MS_UPMB | BR_V ) +#endif /* CONFIG_CAN_DRIVER */ + +/* + * Memory Periodic Timer Prescaler + * + * The Divider for PTA (refresh timer) configuration is based on an + * example SDRAM configuration (64 MBit, one bank). The adjustment to + * the number of chip selects (NCS) and the actually needed refresh + * rate is done by setting MPTPR. + * + * PTA is calculated from + * PTA = (gclk * Trefresh) / ((2 ^ (2 * DFBRG)) * PTP * NCS) + * + * gclk CPU clock (not bus clock!) + * Trefresh Refresh cycle * 4 (four word bursts used) + * + * 4096 Rows from SDRAM example configuration + * 1000 factor s -> ms + * 32 PTP (pre-divider from MPTPR) from SDRAM example configuration + * 4 Number of refresh cycles per period + * 64 Refresh cycle in ms per number of rows + * -------------------------------------------- + * Divider = 4096 * 32 * 1000 / (4 * 64) = 512000 + * + * 50 MHz => 50.000.000 / Divider = 98 + * 66 Mhz => 66.000.000 / Divider = 129 + * 80 Mhz => 80.000.000 / Divider = 156 + */ + +#define CFG_PTA_PER_CLK ((4096 * 32 * 1000) / (4 * 64)) +#define CFG_MAMR_PTA 98 + +/* + * For 16 MBit, refresh rates could be 31.3 us + * (= 64 ms / 2K = 125 / quad bursts). + * For a simpler initialization, 15.6 us is used instead. + * + * #define CFG_MPTPR_2BK_2K MPTPR_PTP_DIV32 for 2 banks + * #define CFG_MPTPR_1BK_2K MPTPR_PTP_DIV64 for 1 bank + */ +#define CFG_MPTPR_2BK_4K MPTPR_PTP_DIV16 /* setting for 2 banks */ +#define CFG_MPTPR_1BK_4K MPTPR_PTP_DIV32 /* setting for 1 bank */ + +/* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit */ +#define CFG_MPTPR_2BK_8K MPTPR_PTP_DIV8 /* setting for 2 banks */ +#define CFG_MPTPR_1BK_8K MPTPR_PTP_DIV16 /* setting for 1 bank */ + +/* + * MAMR settings for SDRAM + */ + +/* 8 column SDRAM */ +#define CFG_MAMR_8COL ((CFG_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \ + MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 | \ + MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X) +/* 9 column SDRAM */ +#define CFG_MAMR_9COL ((CFG_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \ + MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 | \ + MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X) + + +/* + * Internal Definitions + * + * Boot Flags + */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +/* Map peripheral control registers on CS4 */ +#define CFG_PERIPHERAL_BASE 0xA0000000 +#define CFG_PERIPHERAL_OR_AM 0xFFFF8000 /* 32 kB address mask */ +#define CFG_OR4_PRELIM (CFG_PERIPHERAL_OR_AM | OR_TRLX | OR_CSNT_SAM | \ + OR_SCY_2_CLK) +#define CFG_BR4_PRELIM ((CFG_PERIPHERAL_BASE & BR_BA_MSK) | BR_PS_8 | BR_V) +#define PCMCIA_CTRL (CFG_PERIPHERAL_BASE + 0xB00) +#endif /* __CONFIG_H */ diff --git a/include/configs/voiceblue.h b/include/configs/voiceblue.h index c5ee78ff4d..4e97b01aa1 100644 --- a/include/configs/voiceblue.h +++ b/include/configs/voiceblue.h @@ -47,6 +47,8 @@ #define CONFIG_SETUP_MEMORY_TAGS 1 #define CONFIG_INITRD_TAG 1 +#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */ + /* * Physical Memory Map */ @@ -94,7 +96,6 @@ #define CONFIG_ENV_OVERWRITE -#define CFG_JFFS_CUSTOM_PART /* see board/voiceblue/jffs2parts.c */ #endif /* @@ -104,9 +105,11 @@ #ifdef VOICEBLUE_SMALL_FLASH #define CFG_MALLOC_LEN (SZ_64K - CFG_GBL_DATA_SIZE) #define CONFIG_STACKSIZE SZ_8K +#define PHYS_SDRAM_1_RESERVED 0 #else #define CFG_MALLOC_LEN SZ_4M #define CONFIG_STACKSIZE SZ_1M +#define PHYS_SDRAM_1_RESERVED (CFG_MONITOR_LEN + CFG_MALLOC_LEN + CONFIG_STACKSIZE) #endif /* @@ -174,6 +177,7 @@ #define CONFIG_BOOTCOMMAND "run nboot" #define CONFIG_PREBOOT "run setup" #define CONFIG_EXTRA_ENV_SETTINGS \ + "silent=1\0" \ "ospart=0\0" \ "swapos=no\0" \ "setpart=" \ @@ -185,15 +189,37 @@ "fi\0" \ "setup=setenv bootargs console=ttyS0,$baudrate " \ "mtdparts=$mtdparts\0" \ - "nfsargs=run setpart; setenv bootargs $bootargs " \ - "root=/dev/nfs ip=dhcp\0" \ + "nfsargs=setenv bootargs $bootargs " \ + "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname::off " \ + "nfsroot=$rootpath root=/dev/nfs\0" \ "flashargs=run setpart; setenv bootargs $bootargs " \ "root=/dev/mtdblock$partition ro " \ "rootfstype=jffs2\0" \ - "nboot=run nfsargs; bootp; tftp; bootm\0" \ - "fboot=run flashargs; fsload /boot/uImage; bootm\0" + "initrdargs=setenv bootargs $bootargs " \ + "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname::off\0" \ + "fboot=run flashargs; fsload /boot/uImage; bootm\0" \ + "iboot=bootp; run initrdargs; tftp; bootm\0" \ + "nboot=bootp; run nfsargs; tftp; bootm\0" #endif +#ifndef VOICEBLUE_SMALL_FLASH +#define CONFIG_SILENT_CONSOLE 1 /* enable silent startup */ + +#if 1 /* feel free to disable for development */ +#define CONFIG_AUTOBOOT_KEYED /* Enable password protection */ +#define CONFIG_AUTOBOOT_PROMPT "\nVoiceBlue Enterprise - booting...\n" +#define CONFIG_AUTOBOOT_DELAY_STR "." /* 1st "password" */ +#endif + +/* + * JFFS2 partitions (mtdparts command line support) + */ +#define CONFIG_JFFS2_CMDLINE +#define MTDIDS_DEFAULT "nor0=omapflash.0" +#define MTDPARTS_DEFAULT "mtdparts=omapflash.0:128k(uboot),64k(env),64k(r_env),16256k(data1),-(data2)" + +#endif /* VOICEBLUE_SMALL_FLASH */ + /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ #include <cmd_confdefs.h> @@ -213,7 +239,7 @@ #define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ #define CFG_MEMTEST_START PHYS_SDRAM_1 -#define CFG_MEMTEST_END PHYS_SDRAM_1 + PHYS_SDRAM_1_SIZE +#define CFG_MEMTEST_END PHYS_SDRAM_1 + PHYS_SDRAM_1_SIZE - PHYS_SDRAM_1_RESERVED #undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ @@ -247,22 +273,4 @@ #define VOICEBLUE_LED_REG 0x04030000 -/* - * JFFS2 partitions - * - */ -/* No command line, one static partition */ -#undef CONFIG_JFFS2_CMDLINE -#define CONFIG_JFFS2_DEV "nor0" -#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF -#define CONFIG_JFFS2_PART_OFFSET 0x00040000 - -/* mtdparts command line support */ -/* Note: fake mtd_id used, no linux mtd map file */ -/* -#define CONFIG_JFFS2_CMDLINE -#define MTDIDS_DEFAULT "nor0=voiceblue-0" -#define MTDPARTS_DEFAULT "mtdparts=voiceblue-0:128k(uboot),64k(env),64k(renv),-(jffs2)" -*/ - #endif /* __CONFIG_H */ diff --git a/include/configs/yellowstone.h b/include/configs/yellowstone.h index d3e9671bc3..7d555665ec 100644 --- a/include/configs/yellowstone.h +++ b/include/configs/yellowstone.h @@ -1,5 +1,5 @@ /* - * (C) Copyright 2005 + * (C) Copyright 2005-2006 * Stefan Roese, DENX Software Engineering, sr@denx.de. * * See file CREDITS for list of people who contributed to this @@ -174,7 +174,7 @@ "rootpath=/opt/eldk/ppc_4xx\0" \ "bootfile=/tftpboot/yellowstone/uImage\0" \ "kernel_addr=fc000000\0" \ - "ramdisk_addr=fc100000\0" \ + "ramdisk_addr=fc180000\0" \ "load=tftp 100000 /tftpboot/yellowstone/u-boot.bin\0" \ "update=protect off fff80000 ffffffff;era fff80000 ffffffff;" \ "cp.b 100000 fff80000 80000;" \ diff --git a/include/configs/yosemite.h b/include/configs/yosemite.h index a67b834866..a81cf34f11 100644 --- a/include/configs/yosemite.h +++ b/include/configs/yosemite.h @@ -1,5 +1,5 @@ /* - * (C) Copyright 2005 + * (C) Copyright 2005-2006 * Stefan Roese, DENX Software Engineering, sr@denx.de. * * See file CREDITS for list of people who contributed to this @@ -109,6 +109,8 @@ #define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ #define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ +#define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */ + #define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ #ifdef CFG_ENV_IS_IN_FLASH @@ -174,7 +176,7 @@ "rootpath=/opt/eldk/ppc_4xx\0" \ "bootfile=/tftpboot/yosemite/uImage\0" \ "kernel_addr=fc000000\0" \ - "ramdisk_addr=fc100000\0" \ + "ramdisk_addr=fc180000\0" \ "load=tftp 100000 /tftpboot/yosemite/u-boot.bin\0" \ "update=protect off fff80000 ffffffff;era fff80000 ffffffff;" \ "cp.b 100000 fff80000 80000;" \ diff --git a/include/configs/zylonite.h b/include/configs/zylonite.h new file mode 100644 index 0000000000..c6aa8ece5b --- /dev/null +++ b/include/configs/zylonite.h @@ -0,0 +1,228 @@ +/* + * (C) Copyright 2002 + * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net + * + * (C) Copyright 2002 + * Sysgo Real-Time Solutions, GmbH <www.elinos.com> + * Marius Groeger <mgroeger@sysgo.de> + * + * Configuation settings for the Zylonite board. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Configuration Options + * (easy to change) + */ +#define CONFIG_CPU_MONAHANS 1 /* Intel Monahan CPU */ +#define CONFIG_ZYLONITE 1 /* Zylonite board */ + +/* #define CONFIG_LCD 1 */ +#ifdef CONFIG_LCD +#define CONFIG_SHARP_LM8V31 +#endif +/* #define CONFIG_MMC 1 */ +#define BOARD_LATE_INIT 1 + +#undef CONFIG_SKIP_RELOCATE_UBOOT +#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ + +/* + * Size of malloc() pool + */ +#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024) +#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ + +/* + * Hardware drivers + */ + +#undef TURN_ON_ETHERNET +#ifdef TURN_ON_ETHERNET +# define CONFIG_DRIVER_SMC91111 1 +# define CONFIG_SMC91111_BASE 0x14000300 +# define CONFIG_SMC91111_EXT_PHY +# define CONFIG_SMC_USE_32_BIT +# undef CONFIG_SMC_USE_IOFUNCS /* just for use with the kernel */ +#endif + +/* + * select serial console configuration + */ +#define CONFIG_FFUART 1 + +/* allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE + +#define CONFIG_BAUDRATE 115200 + +#ifdef TURN_ON_ETHERNET +# define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_PING) +#else +# define CONFIG_COMMANDS ((CONFIG_CMD_DFL \ + | CFG_CMD_ENV \ + | CFG_CMD_NAND) \ + & ~(CFG_CMD_NET \ + | CFG_CMD_FLASH \ + | CFG_CMD_IMLS)) +#endif + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include <cmd_confdefs.h> + +#define CONFIG_BOOTDELAY -1 +#define CONFIG_ETHADDR 08:00:3e:26:0a:5b +#define CONFIG_NETMASK 255.255.0.0 +#define CONFIG_IPADDR 192.168.0.21 +#define CONFIG_SERVERIP 192.168.0.250 +#define CONFIG_BOOTCOMMAND "bootm 80000" +#define CONFIG_BOOTARGS "root=/dev/mtdblock2 rootfstype=cramfs console=ttyS0,115200" +#define CONFIG_CMDLINE_TAG +#define CONFIG_TIMESTAMP + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ +#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ +#endif + +/* + * Miscellaneous configurable options + */ +#define CFG_HUSH_PARSER 1 +#define CFG_PROMPT_HUSH_PS2 "> " + +#define CFG_LONGHELP /* undef to save memory */ +#ifdef CFG_HUSH_PARSER +#define CFG_PROMPT "$ " /* Monitor Command Prompt */ +#else +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#endif +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CFG_DEVICE_NULLDEV 1 + +#define CFG_MEMTEST_START 0x9c000000 /* memtest works on */ +#define CFG_MEMTEST_END 0x9c400000 /* 4 ... 8 MB in DRAM */ + +#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ + +#define CFG_LOAD_ADDR (CFG_DRAM_BASE + 0x8000) /* default load address */ + +#define CFG_HZ 3250000 /* incrementer freq: 3.25 MHz */ + +/* Monahans Core Frequency */ +#define CFG_MONAHANS_RUN_MODE_OSC_RATIO 16 /* valid values: 8, 16, 24, 31 */ +#define CFG_MONAHANS_TURBO_RUN_MODE_RATIO 1 /* valid values: 1, 2 */ + + /* valid baudrates */ +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +/* #define CFG_MMC_BASE 0xF0000000 */ + +/* + * Stack sizes + * + * The stack sizes are set up in start.S using the settings below + */ +#define CONFIG_STACKSIZE (128*1024) /* regular stack */ +#ifdef CONFIG_USE_IRQ +#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ +#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ +#endif + +/* + * Physical Memory Map + */ +#define CONFIG_NR_DRAM_BANKS 4 /* we have 2 banks of DRAM */ +#define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */ +#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */ +#define PHYS_SDRAM_2 0xa4000000 /* SDRAM Bank #2 */ +#define PHYS_SDRAM_2_SIZE 0x00000000 /* 0 MB */ +#define PHYS_SDRAM_3 0xa8000000 /* SDRAM Bank #3 */ +#define PHYS_SDRAM_3_SIZE 0x00000000 /* 0 MB */ +#define PHYS_SDRAM_4 0xac000000 /* SDRAM Bank #4 */ +#define PHYS_SDRAM_4_SIZE 0x00000000 /* 0 MB */ + +#define CFG_DRAM_BASE 0x80000000 /* at CS0 */ +#define CFG_DRAM_SIZE 0x04000000 /* 64 MB Ram */ + +#undef CFG_SKIP_DRAM_SCRUB + + +/* + * NAND Flash + */ +/* Use the new NAND code. (BOARDLIBS = drivers/nand/libnand.a required) */ +#define CONFIG_NEW_NAND_CODE +#define CFG_NAND0_BASE 0x0 +#undef CFG_NAND1_BASE + +#define CFG_NAND_BASE_LIST { CFG_NAND0_BASE } +#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ + +/* nand timeout values */ +#define CFG_NAND_PROG_ERASE_TO 3000 +#define CFG_NAND_OTHER_TO 100 +#define CFG_NAND_SENDCMD_RETRY 3 +#undef NAND_ALLOW_ERASE_ALL /* Allow erasing bad blocks - don't use */ + +/* NAND Timing Parameters (in ns) */ +#define NAND_TIMING_tCH 10 +#define NAND_TIMING_tCS 0 +#define NAND_TIMING_tWH 20 +#define NAND_TIMING_tWP 40 + +#define NAND_TIMING_tRH 20 +#define NAND_TIMING_tRP 40 + +#define NAND_TIMING_tR 11123 +#define NAND_TIMING_tWHR 100 +#define NAND_TIMING_tAR 10 + +/* NAND debugging */ +#define CFG_DFC_DEBUG1 /* usefull */ +#undef CFG_DFC_DEBUG2 /* noisy */ +#undef CFG_DFC_DEBUG3 /* extremly noisy */ + +#define CONFIG_MTD_DEBUG +#define CONFIG_MTD_DEBUG_VERBOSE 1 + +#define ADDR_COLUMN 1 +#define ADDR_PAGE 2 +#define ADDR_COLUMN_PAGE 3 + +#define NAND_ChipID_UNKNOWN 0x00 +#define NAND_MAX_FLOORS 1 +#define NAND_MAX_CHIPS 1 + +#define CFG_NO_FLASH 1 + +#define CFG_ENV_IS_IN_NAND 1 +#define CFG_ENV_OFFSET 0x40000 +#define CFG_ENV_OFFSET_REDUND 0x44000 +#define CFG_ENV_SIZE 0x4000 + + +#endif /* __CONFIG_H */ |