diff options
Diffstat (limited to 'include/configs')
| -rw-r--r-- | include/configs/M5271EVB.h | 40 | ||||
| -rw-r--r-- | include/configs/ads5121.h | 59 |
2 files changed, 89 insertions, 10 deletions
diff --git a/include/configs/M5271EVB.h b/include/configs/M5271EVB.h index 7ddeb550b6..50b3ab2808 100644 --- a/include/configs/M5271EVB.h +++ b/include/configs/M5271EVB.h @@ -82,7 +82,10 @@ #define CONFIG_CMD_MISC #undef CONFIG_CMD_LOADS -#undef CONFIG_CMD_LOADB +#define CONFIG_CMD_LOADB +#define CONFIG_CMDLINE_EDITING 1 /* enables command line history */ +#define CONFIG_SYS_HUSH_PARSER /* Use the HUSH parser */ +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " #define CONFIG_MCFFEC #ifdef CONFIG_MCFFEC @@ -116,7 +119,7 @@ #define CONFIG_SYS_I2C_OFFSET 0x00000300 #define CONFIG_SYS_IMMR CONFIG_SYS_MBAR -#define CONFIG_BOOTDELAY 1 /* autoboot after 5 seconds */ +#define CONFIG_BOOTDELAY 1 /* autoboot after 1 seconds */ #define CONFIG_BOOTFILE "u-boot.bin" #ifdef CONFIG_MCFFEC # define CONFIG_NET_RETRY_COUNT 5 @@ -128,16 +131,16 @@ # define CONFIG_OVERWRITE_ETHADDR_ONCE #endif /* FEC_ENET */ -#define CONFIG_HOSTNAME M5235EVB +#define CONFIG_HOSTNAME M5271EVB #define CONFIG_EXTRA_ENV_SETTINGS \ "netdev=eth0\0" \ "loadaddr=10000\0" \ - "u-boot=u-boot.bin\0" \ - "load=tftp ${loadaddr) ${u-boot}\0" \ + "uboot=u-boot.bin\0" \ + "load=tftp $loadaddr $uboot\0" \ "upd=run load; run prog\0" \ - "prog=prot off ffe00000 ffe2ffff;" \ - "era ffe00000 ffe2ffff;" \ - "cp.b ${loadaddr} 0 ${filesize};" \ + "prog=prot off ffe00000 ffe3ffff;" \ + "era ffe00000 ffe3ffff;" \ + "cp.b $loadaddr ffe00000 $filesize;" \ "save\0" \ "" @@ -159,7 +162,17 @@ #define CONFIG_SYS_MEMTEST_END 0x380000 #define CONFIG_SYS_HZ 1000000 + +/* Clock configuration + * The external oscillator is a 25.000 MHz + * CONFIG_SYS_CLK for ColdFire V2 sets cpu_clk (not bus_clk) + * bus_clk = (cpu_clk/2) (fixed ratio) + * + * If CONFIG_SYS_CLK is changed. the CONFIG_SYS_MCF_SYNCR must be updated to + * match the new clock speed. Max cpu_clk is 150 MHz. + */ #define CONFIG_SYS_CLK 100000000 +#define CONFIG_SYS_MCF_SYNCR (MCF_SYNCR_MFD_4X | MCF_SYNCR_RFD_DIV1) /* * Low Level Configuration Settings @@ -216,7 +229,14 @@ /* Cache Configuration */ #define CONFIG_SYS_CACHELINE_SIZE 16 -/* Port configuration */ -#define CONFIG_SYS_FECI2C 0xF0 +/* Chip Select 0 : Boot Flash */ +#define CONFIG_SYS_CS0_BASE 0xFFE00000 +#define CONFIG_SYS_CS0_MASK 0x001F0001 +#define CONFIG_SYS_CS0_CTRL 0x00001980 + +/* Chip Select 1 : External SRAM */ +#define CONFIG_SYS_CS1_BASE 0x30000000 +#define CONFIG_SYS_CS1_MASK 0x00070001 +#define CONFIG_SYS_CS1_CTRL 0x00001900 #endif /* _M5271EVB_H */ diff --git a/include/configs/ads5121.h b/include/configs/ads5121.h index bb3525f175..8fda3f29fa 100644 --- a/include/configs/ads5121.h +++ b/include/configs/ads5121.h @@ -47,6 +47,7 @@ #define CONFIG_E300 1 /* E300 Family */ #define CONFIG_MPC512X 1 /* MPC512X family */ #define CONFIG_FSL_DIU_FB 1 /* FSL DIU */ +#undef CONFIG_FSL_DIU_LOGO_BMP /* Don't include FSL DIU binary bmp */ /* video */ #undef CONFIG_VIDEO @@ -294,6 +295,11 @@ #endif /* + * IIM - IC Identification Module + */ +#undef CONFIG_IIM + +/* * EEPROM configuration */ #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 /* 16-bit EEPROM address */ @@ -348,11 +354,20 @@ #define CONFIG_CMD_REGINFO #define CONFIG_CMD_EEPROM #define CONFIG_CMD_DATE +#undef CONFIG_CMD_FUSE +#define CONFIG_CMD_IDE +#define CONFIG_CMD_EXT2 #if defined(CONFIG_PCI) #define CONFIG_CMD_PCI #endif +#if defined(CONFIG_CMD_IDE) +#define CONFIG_DOS_PARTITION +#define CONFIG_MAC_PARTITION +#define CONFIG_ISO_PARTITION +#endif /* defined(CONFIG_CMD_IDE) */ + /* * Watchdog timeout = CONFIG_SYS_WATCHDOG_VALUE * 65536 / IPS clock. * For example, when IPS is set to 66MHz and CONFIG_SYS_WATCHDOG_VALUE is set @@ -489,4 +504,48 @@ #define OF_TBCLK (bd->bi_busfreq / 4) #define OF_STDOUT_PATH "/soc@80000000/serial@11300" +/*----------------------------------------------------------------------- + * IDE/ATA stuff + *----------------------------------------------------------------------- + */ + +#undef CONFIG_IDE_8xx_PCCARD /* Use IDE with PC Card Adapter */ +#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ +#undef CONFIG_IDE_LED /* LED for IDE not supported */ + +#define CONFIG_IDE_RESET /* reset for IDE supported */ +#define CONFIG_IDE_PREINIT + +#define CONFIG_SYS_IDE_MAXBUS 1 /* max. 1 IDE bus */ +#define CONFIG_SYS_IDE_MAXDEVICE 2 /* max. 1 drive per IDE bus */ + +#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000 +#define CONFIG_SYS_ATA_BASE_ADDR MPC512X_PATA + +/* Offset for data I/O RefMan MPC5121EE Table 28-10 */ +#define CONFIG_SYS_ATA_DATA_OFFSET (0x00A0) + +/* Offset for normal register accesses */ +#define CONFIG_SYS_ATA_REG_OFFSET (CONFIG_SYS_ATA_DATA_OFFSET) + +/* Offset for alternate registers RefMan MPC5121EE Table 28-23 */ +#define CONFIG_SYS_ATA_ALT_OFFSET (0x00D8) + +/* Interval between registers */ +#define CONFIG_SYS_ATA_STRIDE 4 + +#define ATA_BASE_ADDR MPC512X_PATA + +/* + * Control register bit definitions + */ +#define FSL_ATA_CTRL_FIFO_RST_B 0x80000000 +#define FSL_ATA_CTRL_ATA_RST_B 0x40000000 +#define FSL_ATA_CTRL_FIFO_TX_EN 0x20000000 +#define FSL_ATA_CTRL_FIFO_RCV_EN 0x10000000 +#define FSL_ATA_CTRL_DMA_PENDING 0x08000000 +#define FSL_ATA_CTRL_DMA_ULTRA 0x04000000 +#define FSL_ATA_CTRL_DMA_WRITE 0x02000000 +#define FSL_ATA_CTRL_IORDY_EN 0x01000000 + #endif /* __CONFIG_H */ |