diff options
Diffstat (limited to 'include/configs')
| -rw-r--r-- | include/configs/corvus.h | 3 | ||||
| -rw-r--r-- | include/configs/gardena-smart-gateway-at91sam.h | 88 | ||||
| -rw-r--r-- | include/configs/pm9g45.h | 173 | ||||
| -rw-r--r-- | include/configs/smartweb.h | 4 | ||||
| -rw-r--r-- | include/configs/taurus.h | 3 |
5 files changed, 189 insertions, 82 deletions
diff --git a/include/configs/corvus.h b/include/configs/corvus.h index 5dd5c28e08..749a67d4b0 100644 --- a/include/configs/corvus.h +++ b/include/configs/corvus.h @@ -139,4 +139,7 @@ #define CONFIG_SYS_MCKR 0x1301 #define CONFIG_SYS_MCKR_CSS 0x1302 +#define CONFIG_SPL_PAD_TO CONFIG_SYS_NAND_U_BOOT_OFFS +#define CONFIG_SYS_SPL_LEN CONFIG_SPL_PAD_TO + #endif diff --git a/include/configs/gardena-smart-gateway-at91sam.h b/include/configs/gardena-smart-gateway-at91sam.h new file mode 100644 index 0000000000..e9a06e6d00 --- /dev/null +++ b/include/configs/gardena-smart-gateway-at91sam.h @@ -0,0 +1,88 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright (C) 2012 Atmel Corporation + * Copyright (C) 2019 Stefan Roese <sr@denx.de> + * + * Configuation settings for the GARDENA smart Gateway (AT91SAM9G25) + */ + +#ifndef __CONFIG_H__ +#define __CONFIG_H__ + +/* ARM asynchronous clock */ +#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 +#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* 12 MHz crystal */ + +#ifndef CONFIG_SPL_BUILD +#define CONFIG_SKIP_LOWLEVEL_INIT +#endif +#define CONFIG_SKIP_LOWLEVEL_INIT_ONLY + +/* general purpose I/O */ +#define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */ + +/* SDRAM */ +#define CONFIG_SYS_SDRAM_BASE 0x20000000 +#define CONFIG_SYS_SDRAM_SIZE 0x08000000 /* 128 megs */ + +#define CONFIG_SYS_INIT_SP_ADDR \ + (CONFIG_SYS_SDRAM_BASE + 16 * 1024 - GENERATED_GBL_DATA_SIZE) + +#define CONFIG_SYS_MALLOC_LEN (16 * 1024 * 1024) + +/* NAND flash */ +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_SYS_NAND_BASE 0x40000000 +#define CONFIG_SYS_NAND_DBW_8 1 +/* our ALE is AD21 */ +#define CONFIG_SYS_NAND_MASK_ALE BIT(21) +/* our CLE is AD22 */ +#define CONFIG_SYS_NAND_MASK_CLE BIT(22) +#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PD4 +#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PD5 + +#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ + +/* environment organization */ +#define CONFIG_ENV_UBI_PART "ubi" +#define CONFIG_ENV_UBI_VOLUME "env" +#define CONFIG_ENV_UBI_VOLUME_REDUND "env_r" +#define CONFIG_ENV_SIZE (64 << 10) + +/* SPL */ +#define CONFIG_SPL_TEXT_BASE 0x300000 +#define CONFIG_SPL_MAX_SIZE 0x7000 +#define CONFIG_SPL_STACK 0x308000 + +#define CONFIG_SPL_BSS_START_ADDR 0x20000000 +#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 +#define CONFIG_SYS_SPL_MALLOC_START 0x20080000 +#define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000 + +#define CONFIG_SYS_MONITOR_LEN (512 << 10) + +#define CONFIG_SYS_MASTER_CLOCK 132096000 +#define CONFIG_SYS_AT91_PLLA 0x20c73f03 +#define CONFIG_SYS_MCKR 0x1301 +#define CONFIG_SYS_MCKR_CSS 0x1302 + +#define CONFIG_SPL_NAND_DRIVERS +#define CONFIG_SPL_NAND_BASE +#define CONFIG_SPL_NAND_RAW_ONLY +#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x40000 +#define CONFIG_SYS_NAND_U_BOOT_SIZE 0xa0000 +#define CONFIG_SYS_UBOOT_START CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_NAND_U_BOOT_DST CONFIG_SYS_TEXT_BASE + +#define CONFIG_SYS_NAND_5_ADDR_CYCLE +#define CONFIG_SYS_NAND_PAGE_SIZE 0x800 +#define CONFIG_SYS_NAND_PAGE_COUNT 64 +#define CONFIG_SYS_NAND_OOBSIZE 64 +#define CONFIG_SYS_NAND_BLOCK_SIZE 0x20000 +#define CONFIG_SYS_NAND_BAD_BLOCK_POS 0x0 + +#define CONFIG_SPL_PAD_TO CONFIG_SYS_NAND_U_BOOT_OFFS +#define CONFIG_SYS_SPL_LEN CONFIG_SPL_PAD_TO + +#endif diff --git a/include/configs/pm9g45.h b/include/configs/pm9g45.h index 46b8030894..e34873cea7 100644 --- a/include/configs/pm9g45.h +++ b/include/configs/pm9g45.h @@ -15,110 +15,119 @@ #ifndef __CONFIG_H #define __CONFIG_H -/* - * SoC must be defined first, before hardware.h is included. - * In this case SoC is defined in boards.cfg. - */ -#include <asm/hardware.h> - -#define CONFIG_SYS_AT91_CPU_NAME "AT91SAM9G45" - -#define CONFIG_MACH_TYPE MACH_TYPE_PM9G45 - /* ARM asynchronous clock */ -#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */ -#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */ - -#define CONFIG_ARCH_CPU_INIT - -#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS 1 -#define CONFIG_INITRD_TAG 1 +#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 +#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */ +#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_INITRD_TAG #define CONFIG_SKIP_LOWLEVEL_INIT -/* - * Hardware drivers - */ -#define CONFIG_AT91_GPIO 1 -#define CONFIG_ATMEL_USART 1 -#define CONFIG_USART_BASE ATMEL_BASE_DBGU -#define CONFIG_USART_ID ATMEL_ID_SYS - -#define CONFIG_SYS_USE_NANDFLASH 1 - -/* LED */ -#define CONFIG_AT91_LED -#define CONFIG_RED_LED GPIO_PIN_PD(31) /* this is the user1 led */ -#define CONFIG_GREEN_LED GPIO_PIN_PD(0) /* this is the user2 led */ - +/* general purpose I/O */ +#define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */ /* * BOOTP options */ -#define CONFIG_BOOTP_BOOTFILESIZE 1 - -#define CONFIG_JFFS2_CMDLINE 1 -#define CONFIG_JFFS2_NAND 1 -#define CONFIG_JFFS2_DEV "nand0" /* NAND dev jffs2 lives on */ -#define CONFIG_JFFS2_PART_OFFSET 0 /* start of jffs2 partition */ -#define CONFIG_JFFS2_PART_SIZE (256 * 1024 * 1024) /* partition */ +#define CONFIG_BOOTP_BOOTFILESIZE /* SDRAM */ -#define PHYS_SDRAM 0x70000000 -#define PHYS_SDRAM_SIZE 0x08000000 /* 128 megs */ +#define CONFIG_SYS_SDRAM_BASE 0x70000000 +#define CONFIG_SYS_SDRAM_SIZE 0x08000000 + +#define CONFIG_SYS_INIT_SP_ADDR \ + (CONFIG_SYS_SDRAM_BASE + 16 * 1024 - GENERATED_GBL_DATA_SIZE) /* NAND flash */ #ifdef CONFIG_CMD_NAND -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_SYS_NAND_BASE 0x40000000 -#define CONFIG_SYS_NAND_DBW_8 1 +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_SYS_NAND_BASE ATMEL_BASE_CS3 +#define CONFIG_SYS_NAND_DBW_8 /* our ALE is AD21 */ -#define CONFIG_SYS_NAND_MASK_ALE (1 << 21) +#define CONFIG_SYS_NAND_MASK_ALE BIT(21) /* our CLE is AD22 */ -#define CONFIG_SYS_NAND_MASK_CLE (1 << 22) -#define CONFIG_SYS_NAND_ENABLE_PIN GPIO_PIN_PC(14) -#define CONFIG_SYS_NAND_READY_PIN GPIO_PIN_PD(3) - +#define CONFIG_SYS_NAND_MASK_CLE BIT(22) +#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PC14 +#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PD3 +#define CONFIG_SYS_NAND_DRIVER_ECC_LAYOUT #endif /* Ethernet */ -#define CONFIG_MACB 1 -#define CONFIG_RMII 1 -#define CONFIG_NET_RETRY_COUNT 20 -#define CONFIG_RESET_PHY_R 1 - -/* USB */ -#define CONFIG_USB_ATMEL -#define CONFIG_USB_ATMEL_CLK_SEL_UPLL -#define CONFIG_USB_OHCI_NEW 1 -#define CONFIG_SYS_USB_OHCI_CPU_INIT 1 -#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00700000 /* _UHP_OHCI_BASE */ -#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9g45" -#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2 - -/* board specific(not enough SRAM) */ -#define CONFIG_AT91SAM9G45_LCD_BASE PHYS_SDRAM + 0xE00000 - -#define CONFIG_SYS_LOAD_ADDR PHYS_SDRAM + 0x2000000 /* load addr */ - -#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM -#define CONFIG_SYS_MEMTEST_END CONFIG_AT91SAM9G45_LCD_BASE - -/* bootstrap + u-boot + env + linux in nandflash */ -#define CONFIG_ENV_OFFSET 0x60000 -#define CONFIG_ENV_OFFSET_REDUND 0x80000 -#define CONFIG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */ -#define CONFIG_BOOTCOMMAND "nand read 0x72000000 0x200000 0x200000; bootm" +#define CONFIG_RESET_PHY_R +#define CONFIG_AT91_WANTS_COMMON_PHY + +#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ + +#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE +#define CONFIG_SYS_MEMTEST_END 0x23e00000 + +#ifdef CONFIG_NAND_BOOT +/* bootstrap + u-boot + env in nandflash */ +#define CONFIG_ENV_OFFSET 0x140000 +#define CONFIG_ENV_OFFSET_REDUND 0x100000 +#define CONFIG_ENV_SIZE 0x20000 + +#define CONFIG_BOOTCOMMAND \ + "nand read 0x70000000 0x200000 0x300000;" \ + "bootm 0x70000000" +#elif CONFIG_SD_BOOT +/* bootstrap + u-boot + env + linux in mmc */ +#define CONFIG_ENV_SIZE 0x4000 + +#define CONFIG_BOOTCOMMAND "fatload mmc 0:1 0x71000000 dtb; " \ + "fatload mmc 0:1 0x72000000 zImage; " \ + "bootz 0x72000000 - 0x71000000" +#endif /* * Size of malloc() pool */ -#define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128*1024,\ - 0x1000) +#define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + \ + 128 * 1024, 0x1000) + +/* Defines for SPL */ +#define CONFIG_SPL_TEXT_BASE 0x300000 +#define CONFIG_SPL_MAX_SIZE 0x010000 +#define CONFIG_SPL_STACK 0x310000 + +#define CONFIG_SYS_MONITOR_LEN 0x80000 + +#ifdef CONFIG_SD_BOOT + +#define CONFIG_SPL_BSS_START_ADDR 0x70000000 +#define CONFIG_SPL_BSS_MAX_SIZE 0x00080000 +#define CONFIG_SYS_SPL_MALLOC_START 0x70080000 +#define CONFIG_SYS_SPL_MALLOC_SIZE 0x00080000 + +#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 +#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" + +#elif CONFIG_NAND_BOOT +#define CONFIG_SPL_NAND_DRIVERS +#define CONFIG_SPL_NAND_BASE +#define CONFIG_SPL_NAND_ECC +#define CONFIG_SPL_NAND_SOFTECC +#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x40000 +#define CONFIG_SYS_NAND_U_BOOT_SIZE 0x80000 +#define CONFIG_SYS_NAND_5_ADDR_CYCLE + +#define CONFIG_SYS_NAND_PAGE_SIZE 0x800 +#define CONFIG_SYS_NAND_BLOCK_SIZE 0x20000 +#define CONFIG_SYS_NAND_PAGE_COUNT 64 +#define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS +#define CONFIG_SYS_NAND_ECCSIZE 256 +#define CONFIG_SYS_NAND_ECCBYTES 3 +#define CONFIG_SYS_NAND_OOBSIZE 64 +#define CONFIG_SYS_NAND_ECCPOS { 40, 41, 42, 43, 44, 45, 46, 47, \ + 48, 49, 50, 51, 52, 53, 54, 55, \ + 56, 57, 58, 59, 60, 61, 62, 63, } +#endif -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x1000 - \ - GENERATED_GBL_DATA_SIZE) +#define CONFIG_SPL_ATMEL_SIZE +#define CONFIG_SYS_MASTER_CLOCK 132096000 +#define CONFIG_SYS_AT91_PLLA 0x20c73f03 +#define CONFIG_SYS_MCKR 0x1301 +#define CONFIG_SYS_MCKR_CSS 0x1302 #endif diff --git a/include/configs/smartweb.h b/include/configs/smartweb.h index 28af575bf2..f95b29480d 100644 --- a/include/configs/smartweb.h +++ b/include/configs/smartweb.h @@ -221,4 +221,8 @@ #define CONFIG_SYS_ICACHE_OFF #define CONFIG_SYS_DCACHE_OFF #endif + +#define CONFIG_SPL_PAD_TO CONFIG_SYS_NAND_U_BOOT_OFFS +#define CONFIG_SYS_SPL_LEN CONFIG_SPL_PAD_TO + #endif /* __CONFIG_H */ diff --git a/include/configs/taurus.h b/include/configs/taurus.h index 1d24577993..3582eb2edf 100644 --- a/include/configs/taurus.h +++ b/include/configs/taurus.h @@ -173,4 +173,7 @@ #define CONFIG_SYS_MCKR_CSS (0x02 | CONFIG_SYS_MCKR) #define CONFIG_SYS_AT91_PLLB 0x10193F05 +#define CONFIG_SPL_PAD_TO CONFIG_SYS_NAND_U_BOOT_OFFS +#define CONFIG_SYS_SPL_LEN CONFIG_SPL_PAD_TO + #endif |