diff options
Diffstat (limited to 'include/lpd7a400_cpld.h')
| -rw-r--r-- | include/lpd7a400_cpld.h | 195 |
1 files changed, 0 insertions, 195 deletions
diff --git a/include/lpd7a400_cpld.h b/include/lpd7a400_cpld.h deleted file mode 100644 index c70af09e67..0000000000 --- a/include/lpd7a400_cpld.h +++ /dev/null @@ -1,195 +0,0 @@ -/* - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -/* - * Logic lh7a400-10 Card Engine CPLD interface - */ - -#ifndef __LPD7A400_CPLD_H_ -#define __LPD7A400_CPLD_H_ - - -/* - * IO Controller Address and Register Definitions - * - using LH7A400-10 Card Engine IO Controller Specification - * (logic PN: 70000079) - */ - -/*------------------------------------------------------------------ - * Slow Peripherals (nCS6) - */ -#define LPD7A400_CPLD_CF (0x60200000) -#define LPD7A400_CPLD_ISA (0x60400000) - -/*------------------------------------------------------------------ - * Fast Peripherals (nCS7) - * - * The CPLD directs access to 0x70000000-0x701fffff to the onboard - * ethernet controller - */ -#define LPD7A400_CPLD_WLAN_BASE (0x70000000) - -/* All registers are 8 bit */ -#define LPD7A400_CPLD_CECTL_REG (0x70200000) -#define LPD7A400_CPLD_SPIDATA_REG (0x70600000) -#define LPD7A400_CPLD_SPICTL_REG (0x70800000) -#define LPD7A400_CPLD_EEPSPI_REG (0x70a00000) -#define LPD7A400_CPLD_INTMASK_REG (0x70c00000) -#define LPD7A400_CPLD_MODE_REG (0x70e00000) -#define LPD7A400_CPLD_FLASH_REG (0x71000000) -#define LPD7A400_CPLD_PWRMG_REG (0x71200000) -#define LPD7A400_CPLD_REV_REG (0x71400000) -#define LPD7A400_CPLD_EXTGPIO_REG (0x71600000) -#define LPD7A400_CPLD_GPIODATA_REG (0x71800000) -#define LPD7A400_CPLD_GPIODIR_REG (0x71a00000) - -#define LPD7A400_CPLD_REGPTR (volatile u8*) - -/* Card Engine Control Register (section 3.1.2) */ -#define CECTL_SWINT (0x80) /* Software settable interrupt source - (routed to uP PF3) - 0 = generate interrupt, 1 = do not */ -#define CECTL_OCMSK (0x40) /* USB1 connection interrupt mask - 0 = not masked, 1 = masked */ -#define CECTL_PDRV (0x20) /* PCC_nDRV output - 0 = active, 1 = inactive */ -#define CECTL_USB1C (0x10) /* USB1 connection interrupt - 0 = active, 1 = inactive */ -#define CECTL_USB1P (0x08) /* USB1 Power enable - 0 = enabled, 1 = disabled */ -#define CECTL_AWKP (0x04) /* Auto-Wakeup enable - 0 = enabled, 1 = disabled */ -#define CECTL_LCDV (0x02) /* LCD VEE enable - 0 = disabled, 1 = enabled */ -#define CECTL_WLPE (0x01) /* Wired LAN power enable - 0 = enabled, 1 = disabled */ - -/* SPI Control Register (section 3.1.5) */ -#define SPICTL_SPLD (0x20) /* SPI load (R) - 0 = data reg. has not been loaded, shift - count has not been reset - 1 = data reg. loaded, shift count reset */ -#define SPICTL_SPST (0x10) /* SPI start (RW) - 0 = don't load data reg. and reset shift count - 1 = ready to load data reg and reset shift count */ -#define SPICTL_SPDN (0x08) /* SPI done (R) - 0 = not done - 1 = access done */ -#define SPICTL_SPRW (0x04) /* SPI read/write (RW) - 0 = SPI write access - 1 = SPI read access */ -#define SPICTL_STCS (0x02) /* SPI touch chip select (RW) - 0 = not selected - 1 = selected */ -#define SPICTL_SCCS (0x01) /* SPI CODEC chip select (RW) {not used} - 0 = not selected - 1 = selected */ - -/* EEPROM SPI Interface Register (section 3.1.6) */ -#define EEPSPI_EECS (0x08) /* EEPROM chip select (RW) - 0 = not selected - 1 = selected */ -#define EEPSPI_EECK (0x04) /* EEPROM SPI clock (RW) */ -#define EEPSPI_EETX (0x02) /* EEPROM SPI tx data (RW) */ -#define EEPSPI_EERX (0x01) /* EEPROM SPI rx data (R) */ - -/* Interrupt/Mask Register (section 3.1.7) */ -#define INTMASK_CMSK (0x80) /* CPLD_nIRQD interrupt mask (RW) - 0 = not masked - 1 = masked */ -#define INTMASK_CIRQ (0x40) /* interrupt signal to CPLD (R) - 0 = interrupt active - 1 = no interrupt */ -#define INTMASK_PIRQ (0x10) /* legacy, no effect */ -#define INTMASK_TMSK (0x08) /* Touch chip interrupt mask (RW) - 0 = not masked - 1 = masked */ -#define INTMASK_WMSK (0x04) /* Wired LAN interrupt mask (RW) - 0 = not masked - 1 = masked */ -#define INTMASK_TIRQ (0x02) /* Touch chip interrupt request (R) - 0 = interrupt active - 1 = no interrupt */ -#define INTMASK_WIRQ (0x01) /* Wired LAN interrupt request (R) - 0 = interrupt active - 1 = no interrupt */ - -/* Mode Register (section 3.1.8) */ -#define MODE_VS1 (0x80) /* PCMCIA Voltage Sense 1 input (PCC_VS1) (R) - 0 = active slot VS1 pin is low - 1 = active slot VS1 pin is high */ -#define MODE_CD2 (0x40) /* PCMCIA Card Detect 2 input (PCC_nCD2) (R) - 0 = active slot CD2 is low - 1 = active slot CD2 is high */ -#define MODE_IOIS16 (0x20) /* PCMCIA IOIS16 input (PCC_nIOIS16) (R) - 0 = 16 bit access area - 1 = 8 bit access area */ -#define MODE_CD1 (0x10) /* PCMCIA Card Detect 1 input (PCC_nCD1) (R) - 0 = active slot CD1 is low - 1 = active slot CD1 is high */ -#define MODE_upMODE3 (0x08) /* Mode Pin 3 (R) - 0 = off-board boot device - 1 = on-board boot device (flash) */ -#define MODE_upMODE2 (0x04) /* Mode Pin 2 (R) (LH7A400 Little Endian only) - 0 = big endian - 1 = little endian */ -#define MODE_upMODE1 (0x02) /* Mode Pin 1 and Mode Pin 2 (R) */ -#define MODE_upMODE0 (0x01) /* - bus width at boot */ - - -/* Flash Register (section 3.1.9) */ -#define FLASH_FPOP (0x08) /* Flash populated (RW) - 0 = populated, 1 = not */ -#define FLASH_FST2 (0x04) /* Flash status (R) (RY/BY# pin for upper 16 bit chip - 0 = busy, 1 = ready */ -#define FLASH_FST1 (0x02) /* Flash status (R) (RY/BY# pin for lower 16 bit chip - 0 = busy, 1 = ready */ -#define FLASH_FPEN (0x01) /* Flash program enable (RW) - 0 = flash write protected - 1 = programming enabled */ - -/* Power Management Register (section 3.1.10) - * - when either of these is low an unmaskable interrupt to cpu - * is generated - */ -#define PWRMG_STBY (0x10) /* state of nSTANDBY signal to CPLD (R) - 0 = low, 1 = high */ -#define PWRMG_SPND (0x04) /* state of nSUSPEND signal to CPLD (R) - 0 = low, 1 = high */ - - -/* Extended GPIO Register (section 3.1.12) */ -#define EXTGPIO_STATUS1 (0x04) /* Status 1 output (RW) (uP_STATUS_1) - 0 = set pin low, 1 = set pin high */ -#define EXTGPIO_STATUS2 (0x02) /* Status 2 output (RW) (uP_STATUS_2) - 0 = set pin low, 1 = set pin high */ -#define EXTGPIO_GPIO1 (0x01) /* General purpose output (RW) (CPLD_GPIO_1) - 0 = set pin low, 1 = set pin high */ - -/* GPIO Data Register (section 3.1.13) */ -#define GPIODATA_GPIO2 (0x01) /* General purpose input/output (RW) (CPLD_GPIO_2) - 0 = set low (output) / read low (input) - 1 = set high (output) / read high (input) */ - -/* GPIO Direction Register (section 3.1.14) */ -#define GPIODIR_GPDR0 (0x01) /* GPIO2 direction (RW) - 0 = output, 1 = input */ - -#endif /* __LH7A400_H__ */ |