diff options
Diffstat (limited to 'include/mmc.h')
| -rw-r--r-- | include/mmc.h | 212 |
1 files changed, 205 insertions, 7 deletions
diff --git a/include/mmc.h b/include/mmc.h index 010ebe048c..a46eaed746 100644 --- a/include/mmc.h +++ b/include/mmc.h @@ -15,6 +15,13 @@ #include <linux/compiler.h> #include <part.h> +#if CONFIG_IS_ENABLED(MMC_HS200_SUPPORT) +#define MMC_SUPPORTS_TUNING +#endif +#if CONFIG_IS_ENABLED(MMC_UHS_SUPPORT) +#define MMC_SUPPORTS_TUNING +#endif + /* SD/MMC version bits; 8 flags, 8 major, 8 minor, 8 change */ #define SD_VERSION_SD (1U << 31) #define MMC_VERSION_MMC (1U << 30) @@ -52,12 +59,17 @@ #define MMC_VERSION_5_0 MAKE_MMC_VERSION(5, 0, 0) #define MMC_VERSION_5_1 MAKE_MMC_VERSION(5, 1, 0) -#define MMC_MODE_HS (1 << 0) -#define MMC_MODE_HS_52MHz (1 << 1) -#define MMC_MODE_4BIT (1 << 2) -#define MMC_MODE_8BIT (1 << 3) -#define MMC_MODE_SPI (1 << 4) -#define MMC_MODE_DDR_52MHz (1 << 5) +#define MMC_CAP(mode) (1 << mode) +#define MMC_MODE_HS (MMC_CAP(MMC_HS) | MMC_CAP(SD_HS)) +#define MMC_MODE_HS_52MHz MMC_CAP(MMC_HS_52) +#define MMC_MODE_DDR_52MHz MMC_CAP(MMC_DDR_52) +#define MMC_MODE_HS200 MMC_CAP(MMC_HS_200) + +#define MMC_MODE_8BIT BIT(30) +#define MMC_MODE_4BIT BIT(29) +#define MMC_MODE_1BIT BIT(28) +#define MMC_MODE_SPI BIT(27) + #define SD_DATA_4BIT 0x00040000 @@ -82,6 +94,8 @@ #define MMC_CMD_SET_BLOCKLEN 16 #define MMC_CMD_READ_SINGLE_BLOCK 17 #define MMC_CMD_READ_MULTIPLE_BLOCK 18 +#define MMC_CMD_SEND_TUNING_BLOCK 19 +#define MMC_CMD_SEND_TUNING_BLOCK_HS200 21 #define MMC_CMD_SET_BLOCK_COUNT 23 #define MMC_CMD_WRITE_SINGLE_BLOCK 24 #define MMC_CMD_WRITE_MULTIPLE_BLOCK 25 @@ -109,12 +123,34 @@ #define SD_CMD_APP_SEND_OP_COND 41 #define SD_CMD_APP_SEND_SCR 51 +static inline bool mmc_is_tuning_cmd(uint cmdidx) +{ + if ((cmdidx == MMC_CMD_SEND_TUNING_BLOCK_HS200) || + (cmdidx == MMC_CMD_SEND_TUNING_BLOCK)) + return true; + return false; +} + /* SCR definitions in different words */ #define SD_HIGHSPEED_BUSY 0x00020000 #define SD_HIGHSPEED_SUPPORTED 0x00020000 +#define UHS_SDR12_BUS_SPEED 0 +#define HIGH_SPEED_BUS_SPEED 1 +#define UHS_SDR25_BUS_SPEED 1 +#define UHS_SDR50_BUS_SPEED 2 +#define UHS_SDR104_BUS_SPEED 3 +#define UHS_DDR50_BUS_SPEED 4 + +#define SD_MODE_UHS_SDR12 BIT(UHS_SDR12_BUS_SPEED) +#define SD_MODE_UHS_SDR25 BIT(UHS_SDR25_BUS_SPEED) +#define SD_MODE_UHS_SDR50 BIT(UHS_SDR50_BUS_SPEED) +#define SD_MODE_UHS_SDR104 BIT(UHS_SDR104_BUS_SPEED) +#define SD_MODE_UHS_DDR50 BIT(UHS_DDR50_BUS_SPEED) + #define OCR_BUSY 0x80000000 #define OCR_HCS 0x40000000 +#define OCR_S18R 0x1000000 #define OCR_VOLTAGE_MASK 0x007FFF80 #define OCR_ACCESS_MODE 0x60000000 @@ -206,11 +242,23 @@ #define EXT_CSD_CARD_TYPE_DDR_52 (EXT_CSD_CARD_TYPE_DDR_1_8V \ | EXT_CSD_CARD_TYPE_DDR_1_2V) +#define EXT_CSD_CARD_TYPE_HS200_1_8V BIT(4) /* Card can run at 200MHz */ + /* SDR mode @1.8V I/O */ +#define EXT_CSD_CARD_TYPE_HS200_1_2V BIT(5) /* Card can run at 200MHz */ + /* SDR mode @1.2V I/O */ +#define EXT_CSD_CARD_TYPE_HS200 (EXT_CSD_CARD_TYPE_HS200_1_8V | \ + EXT_CSD_CARD_TYPE_HS200_1_2V) + #define EXT_CSD_BUS_WIDTH_1 0 /* Card is in 1 bit mode */ #define EXT_CSD_BUS_WIDTH_4 1 /* Card is in 4 bit mode */ #define EXT_CSD_BUS_WIDTH_8 2 /* Card is in 8 bit mode */ #define EXT_CSD_DDR_BUS_WIDTH_4 5 /* Card is in 4 bit DDR mode */ #define EXT_CSD_DDR_BUS_WIDTH_8 6 /* Card is in 8 bit DDR mode */ +#define EXT_CSD_DDR_FLAG BIT(2) /* Flag for DDR mode */ + +#define EXT_CSD_TIMING_LEGACY 0 /* no high speed */ +#define EXT_CSD_TIMING_HS 1 /* HS */ +#define EXT_CSD_TIMING_HS200 2 /* HS200 */ #define EXT_CSD_BOOT_ACK_ENABLE (1 << 6) #define EXT_CSD_BOOT_PARTITION_ENABLE (1 << 3) @@ -265,6 +313,20 @@ #define ENHNCD_SUPPORT (0x2) #define PART_ENH_ATTRIB (0x1f) +#define MMC_QUIRK_RETRY_SEND_CID BIT(0) +#define MMC_QUIRK_RETRY_SET_BLOCKLEN BIT(1) + +enum mmc_voltage { + MMC_SIGNAL_VOLTAGE_000 = 0, + MMC_SIGNAL_VOLTAGE_120 = 1, + MMC_SIGNAL_VOLTAGE_180 = 2, + MMC_SIGNAL_VOLTAGE_330 = 4, +}; + +#define MMC_ALL_SIGNAL_VOLTAGE (MMC_SIGNAL_VOLTAGE_120 |\ + MMC_SIGNAL_VOLTAGE_180 |\ + MMC_SIGNAL_VOLTAGE_330) + /* Maximum block size for MMC */ #define MMC_MAX_BLOCK_LEN 512 @@ -347,6 +409,14 @@ struct dm_mmc_ops { int (*set_ios)(struct udevice *dev); /** + * send_init_stream() - send the initialization stream: 74 clock cycles + * This is used after power up before sending the first command + * + * @dev: Device to update + */ + void (*send_init_stream)(struct udevice *dev); + + /** * get_cd() - See whether a card is present * * @dev: Device to check @@ -361,6 +431,30 @@ struct dm_mmc_ops { * @return 0 if write-enabled, 1 if write-protected, -ve on error */ int (*get_wp)(struct udevice *dev); + +#ifdef MMC_SUPPORTS_TUNING + /** + * execute_tuning() - Start the tuning process + * + * @dev: Device to start the tuning + * @opcode: Command opcode to send + * @return 0 if OK, -ve on error + */ + int (*execute_tuning)(struct udevice *dev, uint opcode); +#endif + +#if CONFIG_IS_ENABLED(MMC_UHS_SUPPORT) + /** + * wait_dat0() - wait until dat0 is in the target state + * (CLK must be running during the wait) + * + * @dev: Device to check + * @state: target state + * @timeout: timeout in us + * @return 0 if dat0 is in the target state, -ve on error + */ + int (*wait_dat0)(struct udevice *dev, int state, int timeout); +#endif }; #define mmc_get_ops(dev) ((struct dm_mmc_ops *)(dev)->driver->ops) @@ -368,13 +462,19 @@ struct dm_mmc_ops { int dm_mmc_send_cmd(struct udevice *dev, struct mmc_cmd *cmd, struct mmc_data *data); int dm_mmc_set_ios(struct udevice *dev); +void dm_mmc_send_init_stream(struct udevice *dev); int dm_mmc_get_cd(struct udevice *dev); int dm_mmc_get_wp(struct udevice *dev); +int dm_mmc_execute_tuning(struct udevice *dev, uint opcode); +int dm_mmc_wait_dat0(struct udevice *dev, int state, int timeout); /* Transition functions for compatibility */ int mmc_set_ios(struct mmc *mmc); +void mmc_send_init_stream(struct mmc *mmc); int mmc_getcd(struct mmc *mmc); int mmc_getwp(struct mmc *mmc); +int mmc_execute_tuning(struct mmc *mmc, uint opcode); +int mmc_wait_dat0(struct mmc *mmc, int state, int timeout); #else struct mmc_ops { @@ -406,6 +506,50 @@ struct sd_ssr { unsigned int erase_offset; /* In milliseconds */ }; +enum bus_mode { + MMC_LEGACY, + SD_LEGACY, + MMC_HS, + SD_HS, + MMC_HS_52, + MMC_DDR_52, + UHS_SDR12, + UHS_SDR25, + UHS_SDR50, + UHS_DDR50, + UHS_SDR104, + MMC_HS_200, + MMC_MODES_END +}; + +const char *mmc_mode_name(enum bus_mode mode); +void mmc_dump_capabilities(const char *text, uint caps); + +static inline bool mmc_is_mode_ddr(enum bus_mode mode) +{ + if (mode == MMC_DDR_52) + return true; +#if CONFIG_IS_ENABLED(MMC_UHS_SUPPORT) + else if (mode == UHS_DDR50) + return true; +#endif + else + return false; +} + +#define UHS_CAPS (MMC_CAP(UHS_SDR12) | MMC_CAP(UHS_SDR25) | \ + MMC_CAP(UHS_SDR50) | MMC_CAP(UHS_SDR104) | \ + MMC_CAP(UHS_DDR50)) + +static inline bool supports_uhs(uint caps) +{ +#if CONFIG_IS_ENABLED(MMC_UHS_SUPPORT) + return (caps & UHS_CAPS) ? true : false; +#else + return false; +#endif +} + /* * With CONFIG_DM_MMC enabled, struct mmc can be accessed from the MMC device * with mmc_get_mmc_dev(). @@ -421,9 +565,12 @@ struct mmc { void *priv; uint has_init; int high_capacity; + bool clk_disable; /* true if the clock can be turned off */ uint bus_width; uint clock; + enum mmc_voltage signal_voltage; uint card_caps; + uint host_caps; uint ocr; uint dsr; uint dsr_imp; @@ -436,18 +583,27 @@ struct mmc { u8 wr_rel_set; u8 part_config; uint tran_speed; + uint legacy_speed; /* speed for the legacy mode provided by the card */ uint read_bl_len; +#if CONFIG_IS_ENABLED(MMC_WRITE) uint write_bl_len; uint erase_grp_size; /* in 512-byte sectors */ +#endif +#if CONFIG_IS_ENABLED(MMC_HW_PARTITIONING) uint hc_wp_grp_size; /* in 512-byte sectors */ +#endif +#if CONFIG_IS_ENABLED(MMC_WRITE) struct sd_ssr ssr; /* SD status register */ +#endif u64 capacity; u64 capacity_user; u64 capacity_boot; u64 capacity_rpmb; u64 capacity_gp[4]; +#ifndef CONFIG_SPL_BUILD u64 enh_user_start; u64 enh_user_size; +#endif #if !CONFIG_IS_ENABLED(BLK) struct blk_desc block_dev; #endif @@ -457,7 +613,21 @@ struct mmc { int ddr_mode; #if CONFIG_IS_ENABLED(DM_MMC) struct udevice *dev; /* Device for this MMC controller */ +#if CONFIG_IS_ENABLED(DM_REGULATOR) + struct udevice *vmmc_supply; /* Main voltage regulator (Vcc)*/ + struct udevice *vqmmc_supply; /* IO voltage regulator (Vccq)*/ #endif +#endif + u8 *ext_csd; + u32 cardtype; /* cardtype read from the MMC */ + enum mmc_voltage current_voltage; + enum bus_mode selected_mode; /* mode currently used */ + enum bus_mode best_mode; /* best mode is the supported mode with the + * highest bandwidth. It may not always be the + * operating mode due to limitations when + * accessing the boot partitions + */ + u32 quirks; }; struct mmc_hwpart_conf { @@ -507,8 +677,36 @@ void mmc_destroy(struct mmc *mmc); int mmc_unbind(struct udevice *dev); int mmc_initialize(bd_t *bis); int mmc_init(struct mmc *mmc); +int mmc_send_tuning(struct mmc *mmc, u32 opcode, int *cmd_error); + +/** + * mmc_of_parse() - Parse the device tree to get the capabilities of the host + * + * @dev: MMC device + * @cfg: MMC configuration + * @return 0 if OK, -ve on error + */ +int mmc_of_parse(struct udevice *dev, struct mmc_config *cfg); + int mmc_read(struct mmc *mmc, u64 src, uchar *dst, int size); -void mmc_set_clock(struct mmc *mmc, uint clock); + +/** + * mmc_voltage_to_mv() - Convert a mmc_voltage in mV + * + * @voltage: The mmc_voltage to convert + * @return the value in mV if OK, -EINVAL on error (invalid mmc_voltage value) + */ +int mmc_voltage_to_mv(enum mmc_voltage voltage); + +/** + * mmc_set_clock() - change the bus clock + * @mmc: MMC struct + * @clock: bus frequency in Hz + * @disable: flag indicating if the clock must on or off + * @return 0 if OK, -ve on error + */ +int mmc_set_clock(struct mmc *mmc, uint clock, bool disable); + struct mmc *find_mmc_device(int dev_num); int mmc_set_dev(int dev_num); void print_mmc_devices(char separator); |