summaryrefslogtreecommitdiff
path: root/include
diff options
context:
space:
mode:
Diffstat (limited to 'include')
-rw-r--r--include/configs/bf537-stamp.h11
-rw-r--r--include/configs/bf548-ezkit.h10
-rw-r--r--include/configs/bfin_adi_common.h1
-rw-r--r--include/configs/devkit8000.h48
-rw-r--r--include/configs/efikamx.h6
-rw-r--r--include/configs/gplugd.h30
-rw-r--r--include/configs/imx31_litekit.h4
-rw-r--r--include/configs/mx25pdk.h108
-rw-r--r--include/configs/mx31ads.h2
-rw-r--r--include/configs/mx31pdk.h4
-rw-r--r--include/configs/mx51evk.h1
-rw-r--r--include/configs/mx53ard.h2
-rw-r--r--include/configs/mx53evk.h2
-rw-r--r--include/configs/mx53loco.h2
-rw-r--r--include/configs/mx53smd.h4
-rw-r--r--include/configs/omap3_evm.h2
-rw-r--r--include/configs/omap4_common.h2
-rw-r--r--include/configs/omap4_sdp4430.h2
-rw-r--r--include/configs/vision2.h2
-rw-r--r--include/configs/zmx25.h1
-rw-r--r--include/nand.h6
-rw-r--r--include/netdev.h8
-rw-r--r--include/twl6030.h3
23 files changed, 247 insertions, 14 deletions
diff --git a/include/configs/bf537-stamp.h b/include/configs/bf537-stamp.h
index da14a4f06b..1a7273b1ec 100644
--- a/include/configs/bf537-stamp.h
+++ b/include/configs/bf537-stamp.h
@@ -257,8 +257,15 @@
/* Define if want to do post memory test */
#undef CONFIG_POST
#ifdef CONFIG_POST
-#define FLASH_START_POST_BLOCK 11 /* Should > = 11 */
-#define FLASH_END_POST_BLOCK 71 /* Should < = 71 */
+#define CONFIG_SYS_POST_HOTKEYS_GPIO GPIO_PF5
+#define CONFIG_POST_BSPEC1_GPIO_LEDS \
+ GPIO_PF6, GPIO_PF7, GPIO_PF8, GPIO_PF9, GPIO_PF10, GPIO_PF11,
+#define CONFIG_POST_BSPEC2_GPIO_BUTTONS \
+ GPIO_PF5, GPIO_PF4, GPIO_PF3, GPIO_PF2,
+#define CONFIG_POST_BSPEC2_GPIO_NAMES \
+ 10, 11, 12, 13,
+#define CONFIG_SYS_POST_FLASH_START 11
+#define CONFIG_SYS_POST_FLASH_END 71
#endif
/* These are for board tests */
diff --git a/include/configs/bf548-ezkit.h b/include/configs/bf548-ezkit.h
index 3550fd3308..4862baa39d 100644
--- a/include/configs/bf548-ezkit.h
+++ b/include/configs/bf548-ezkit.h
@@ -197,8 +197,14 @@
/* Define if want to do post memory test */
#undef CONFIG_POST
#ifdef CONFIG_POST
-#define FLASH_START_POST_BLOCK 11 /* Should > = 11 */
-#define FLASH_END_POST_BLOCK 71 /* Should < = 71 */
+#define CONFIG_POST_BSPEC1_GPIO_LEDS \
+ GPIO_PG6, GPIO_PG7, GPIO_PG8, GPIO_PG9, GPIO_PG10, GPIO_PG11,
+#define CONFIG_POST_BSPEC2_GPIO_BUTTONS \
+ GPIO_PB8, GPIO_PB9, GPIO_PB10, GPIO_PB11
+#define CONFIG_POST_BSPEC2_GPIO_NAMES \
+ 13, 12, 11, 10,
+#define CONFIG_SYS_POST_FLASH_START 10
+#define CONFIG_SYS_POST_FLASH_END 127
#endif
diff --git a/include/configs/bfin_adi_common.h b/include/configs/bfin_adi_common.h
index 57d9b97321..bae2d761b4 100644
--- a/include/configs/bfin_adi_common.h
+++ b/include/configs/bfin_adi_common.h
@@ -55,7 +55,6 @@
# endif
# ifdef CONFIG_POST
# define CONFIG_CMD_DIAG
-# define CONFIG_POST_ALT_LIST
# endif
# ifdef CONFIG_RTC_BFIN
# define CONFIG_CMD_DATE
diff --git a/include/configs/devkit8000.h b/include/configs/devkit8000.h
index 710092de36..fbcbdb3aff 100644
--- a/include/configs/devkit8000.h
+++ b/include/configs/devkit8000.h
@@ -181,7 +181,7 @@
#define CONFIG_EXTRA_ENV_SETTINGS \
"loadaddr=0x82000000\0" \
- "console=ttyS2,115200n8\0" \
+ "console=ttyO2,115200n8\0" \
"mmcdev=0\0" \
"vram=12M\0" \
"dvimode=1024x768MR-16@60\0" \
@@ -308,4 +308,50 @@
CONFIG_SYS_INIT_RAM_SIZE - \
GENERATED_GBL_DATA_SIZE)
+/* SRAM config */
+#define CONFIG_SYS_SRAM_START 0x40200000
+#define CONFIG_SYS_SRAM_SIZE 0x10000
+
+/* Defines for SPL */
+#define CONFIG_SPL
+#define CONFIG_SPL_NAND_SIMPLE
+
+#define CONFIG_SPL_LIBCOMMON_SUPPORT
+#define CONFIG_SPL_LIBDISK_SUPPORT
+#define CONFIG_SPL_I2C_SUPPORT
+#define CONFIG_SPL_LIBGENERIC_SUPPORT
+#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_POWER_SUPPORT
+#define CONFIG_SPL_NAND_SUPPORT
+#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds"
+
+#define CONFIG_SPL_TEXT_BASE 0x40200000 /*CONFIG_SYS_SRAM_START*/
+#define CONFIG_SPL_MAX_SIZE 0xB400 /* 45 K */
+#define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK
+
+#define CONFIG_SPL_BSS_START_ADDR 0x80000000 /*CONFIG_SYS_SDRAM_BASE*/
+#define CONFIG_SPL_BSS_MAX_SIZE 0x80000
+
+/* NAND boot config */
+#define CONFIG_SYS_NAND_PAGE_COUNT 64
+#define CONFIG_SYS_NAND_PAGE_SIZE 2048
+#define CONFIG_SYS_NAND_OOBSIZE 64
+#define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024)
+#define CONFIG_SYS_NAND_BAD_BLOCK_POS 0
+#define CONFIG_SYS_NAND_ECCPOS {2, 3, 4, 5, 6, 7, 8, 9,\
+ 10, 11, 12, 13}
+
+#define CONFIG_SYS_NAND_ECCSIZE 512
+#define CONFIG_SYS_NAND_ECCBYTES 3
+
+#define CONFIG_SYS_NAND_ECCSTEPS (CONFIG_SYS_NAND_PAGE_SIZE / \
+ CONFIG_SYS_NAND_ECCSIZE)
+#define CONFIG_SYS_NAND_ECCTOTAL (CONFIG_SYS_NAND_ECCBYTES * \
+ CONFIG_SYS_NAND_ECCSTEPS)
+
+#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
+
+#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000
+#define CONFIG_SYS_NAND_U_BOOT_SIZE 0x200000
+
#endif /* __CONFIG_H */
diff --git a/include/configs/efikamx.h b/include/configs/efikamx.h
index b90e34299f..54f48e446d 100644
--- a/include/configs/efikamx.h
+++ b/include/configs/efikamx.h
@@ -31,6 +31,10 @@
*/
/* An i.MX51 CPU */
#define CONFIG_MX51
+
+#define machine_is_efikamx() (CONFIG_MACH_TYPE == MACH_TYPE_MX51_EFIKAMX)
+#define machine_is_efikasb() (CONFIG_MACH_TYPE == MACH_TYPE_MX51_EFIKASB)
+
#include <asm/arch/imx-regs.h>
#define CONFIG_SYS_MX5_HCLK 24000000
@@ -230,6 +234,6 @@
(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
#define CONFIG_SYS_DDR_CLKSEL 0
-#define CONFIG_SYS_CLKTL_CBCDR 0x59E35100
+#define CONFIG_SYS_CLKTL_CBCDR 0x59E35145
#endif
diff --git a/include/configs/gplugd.h b/include/configs/gplugd.h
index cc14f49966..5f72163473 100644
--- a/include/configs/gplugd.h
+++ b/include/configs/gplugd.h
@@ -62,8 +62,34 @@
#define CONFIG_CMD_I2C
#define CONFIG_CMD_AUTOSCRIPT
#undef CONFIG_CMD_FPGA
-#undef CONFIG_CMD_NET
-#undef CONFIG_CMD_NFS
+
+/* Disable DCACHE */
+#define CONFIG_SYS_DCACHE_OFF
+
+/* Network configuration */
+#ifdef CONFIG_CMD_NET
+#define CONFIG_CMD_PING
+#define CONFIG_NET_MULTI
+#define CONFIG_ARMADA100_FEC
+
+/* DHCP Support */
+#define CONFIG_CMD_DHCP
+#define CONFIG_BOOTP_DHCP_REQUEST_DELAY 50000
+#endif /* CONFIG_CMD_NET */
+
+/* GPIO Support */
+#define CONFIG_MARVELL_GPIO
+
+/* PHY configuration */
+#define CONFIG_MII
+#define CONFIG_CMD_MII
+#define CONFIG_RESET_PHY_R
+/* 88E3015 register definition */
+#define PHY_LED_PAR_SEL_REG 22
+#define PHY_LED_MAN_REG 25
+#define PHY_LED_VAL 0x5b /* LINK LED1, ACT LED2 */
+/* GPIO Configuration for PHY */
+#define CONFIG_SYS_GPIO_PHY_RST 104 /* GPIO104 */
/*
* mv-common.h should be defined after CMD configs since it used them
diff --git a/include/configs/imx31_litekit.h b/include/configs/imx31_litekit.h
index b7f1cb3c75..5e976bc165 100644
--- a/include/configs/imx31_litekit.h
+++ b/include/configs/imx31_litekit.h
@@ -41,6 +41,8 @@
#define CONFIG_SYS_TEXT_BASE 0xa0000000
+#define CONFIG_MACH_TYPE MACH_TYPE_MX31LITE
+
/* Temporarily disabled */
#if 0
#define CONFIG_OF_LIBFDT 1
@@ -150,7 +152,7 @@
#define PHYS_SDRAM_1_SIZE (128 * 1024 * 1024)
#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_SYS_SDRAM_BASE CSD0_BASE
+#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
diff --git a/include/configs/mx25pdk.h b/include/configs/mx25pdk.h
new file mode 100644
index 0000000000..0afae24b29
--- /dev/null
+++ b/include/configs/mx25pdk.h
@@ -0,0 +1,108 @@
+/*
+ * (C) Copyright 2011 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/* High Level Configuration Options */
+
+#define CONFIG_MX25_CLK32 32768 /* OSC32K frequency */
+#define CONFIG_SYS_HZ 1000
+#define CONFIG_SYS_TEXT_BASE 0x81200000
+
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_DISPLAY_BOARDINFO
+
+#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_INITRD_TAG
+
+#define CONFIG_MACH_TYPE MACH_TYPE_MX25_3DS
+
+/* Size of malloc() pool */
+#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * 1024 * 1024)
+
+/* Physical Memory Map */
+
+#define CONFIG_NR_DRAM_BANKS 1
+#define PHYS_SDRAM_1 0x80000000
+#define PHYS_SDRAM_1_SIZE (64 * 1024 * 1024)
+
+#define CONFIG_BOARD_EARLY_INIT_F
+
+#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x1000 - \
+ GENERATED_GBL_DATA_SIZE)
+
+/* Memory Test */
+#define CONFIG_SYS_MEMTEST_START (PHYS_SDRAM_1 + PHYS_SDRAM_1_SIZE/2)
+#define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_1 + PHYS_SDRAM_1_SIZE)
+
+/* Stack sizes */
+#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */
+
+/* Serial Info */
+#define CONFIG_MXC_UART
+#define CONFIG_SYS_MX25_UART1
+#define CONFIG_CONS_INDEX 1 /* use UART0 for console */
+#define CONFIG_BAUDRATE 115200 /* Default baud rate */
+#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+
+/* No NOR flash present */
+#define CONFIG_ENV_OFFSET (6 * 64 * 1024)
+#define CONFIG_ENV_SIZE (8 * 1024)
+#define CONFIG_ENV_IS_NOWHERE
+
+#define CONFIG_SYS_NO_FLASH
+#define CONFIG_SYS_64BIT_VSPRINTF
+
+/* U-Boot general configuration */
+#define CONFIG_SYS_PROMPT "MX25PDK U-Boot > "
+#define CONFIG_AUTO_COMPLETE
+#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
+/* Print buffer sz */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
+ sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
+/* Boot Argument Buffer Size */
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
+#define CONFIG_CMDLINE_EDITING
+#define CONFIG_SYS_LONGHELP
+
+/* U-Boot commands */
+#include <config_cmd_default.h>
+#define CONFIG_CMD_CACHE
+
+/* Ethernet */
+#define CONFIG_FEC_MXC
+#define CONFIG_FEC_MXC_PHYADDR 0x1f
+#define CONFIG_MII
+#define CONFIG_CMD_NET
+#define CONFIG_NET_MULTI
+#define CONFIG_ENV_OVERWRITE
+
+#define CONFIG_BOOTDELAY 3
+
+#define CONFIG_LOADADDR 0x81000000 /* loadaddr env var */
+#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "script=boot.scr\0" \
+ "uimage=uImage\0" \
+ "netargs=setenv bootargs console=ttymxc0,${baudrate} " \
+ "root=/dev/nfs " \
+ "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
+ "bootcmd=run netargs; dhcp ${uimage}; bootm\0" \
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/mx31ads.h b/include/configs/mx31ads.h
index adb2ee1ce9..0bea8589b6 100644
--- a/include/configs/mx31ads.h
+++ b/include/configs/mx31ads.h
@@ -35,6 +35,8 @@
#define CONFIG_SYS_TEXT_BASE 0xA0000000
+#define CONFIG_MACH_TYPE MACH_TYPE_MX31ADS
+
/*
* Disabled for now due to build problems under Debian and a significant increase
* in the final file size: 144260 vs. 109536 Bytes.
diff --git a/include/configs/mx31pdk.h b/include/configs/mx31pdk.h
index 1a5bdd1011..cd156d8b61 100644
--- a/include/configs/mx31pdk.h
+++ b/include/configs/mx31pdk.h
@@ -45,6 +45,8 @@
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_INITRD_TAG
+#define CONFIG_MACH_TYPE MACH_TYPE_MX31_3DS
+
#if defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
#define CONFIG_SKIP_LOWLEVEL_INIT
#endif
@@ -124,7 +126,7 @@
* Miscellaneous configurable options
*/
#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_PROMPT "uboot> "
+#define CONFIG_SYS_PROMPT "MX31PDK U-Boot > "
#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
/* Print Buffer Size */
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
diff --git a/include/configs/mx51evk.h b/include/configs/mx51evk.h
index 7d05dc8429..d62a4f2965 100644
--- a/include/configs/mx51evk.h
+++ b/include/configs/mx51evk.h
@@ -48,6 +48,7 @@
#define CONFIG_OF_LIBFDT 1
+#define CONFIG_MACH_TYPE MACH_TYPE_MX51_BABBAGE
/*
* Size of malloc() pool
*/
diff --git a/include/configs/mx53ard.h b/include/configs/mx53ard.h
index c0b8d6a61a..26fc219ca2 100644
--- a/include/configs/mx53ard.h
+++ b/include/configs/mx53ard.h
@@ -29,6 +29,8 @@
#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO
+#define CONFIG_MACH_TYPE MACH_TYPE_MX53_ARD
+
#include <asm/arch/imx-regs.h>
#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
diff --git a/include/configs/mx53evk.h b/include/configs/mx53evk.h
index 7fb1d9aa75..b127b06cc3 100644
--- a/include/configs/mx53evk.h
+++ b/include/configs/mx53evk.h
@@ -29,6 +29,8 @@
#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO
+#define CONFIG_MACH_TYPE MACH_TYPE_MX53_EVK
+
#include <asm/arch/imx-regs.h>
#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
diff --git a/include/configs/mx53loco.h b/include/configs/mx53loco.h
index cfb38a5673..4091703732 100644
--- a/include/configs/mx53loco.h
+++ b/include/configs/mx53loco.h
@@ -30,6 +30,8 @@
#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO
+#define CONFIG_MACH_TYPE MACH_TYPE_MX53_LOCO
+
#include <asm/arch/imx-regs.h>
#define CONFIG_CMDLINE_TAG
diff --git a/include/configs/mx53smd.h b/include/configs/mx53smd.h
index 49f8c6e8e7..261f0bc45c 100644
--- a/include/configs/mx53smd.h
+++ b/include/configs/mx53smd.h
@@ -1,7 +1,7 @@
/*
* Copyright (C) 2011 Freescale Semiconductor, Inc.
*
- * Configuration settings for the MX53-SMDFreescale board.
+ * Configuration settings for the MX53SMD Freescale board.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
@@ -29,6 +29,8 @@
#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO
+#define CONFIG_MACH_TYPE MACH_TYPE_MX53_SMD
+
#include <asm/arch/imx-regs.h>
#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
diff --git a/include/configs/omap3_evm.h b/include/configs/omap3_evm.h
index fdc861d9d4..7af30c206d 100644
--- a/include/configs/omap3_evm.h
+++ b/include/configs/omap3_evm.h
@@ -200,7 +200,7 @@
"loadaddr=0x82000000\0" \
"usbtty=cdc_acm\0" \
"mmcdev=0\0" \
- "console=ttyS2,115200n8\0" \
+ "console=ttyO0,115200n8\0" \
"mmcargs=setenv bootargs console=${console} " \
"root=/dev/mmcblk0p2 rw " \
"rootfstype=ext3 rootwait\0" \
diff --git a/include/configs/omap4_common.h b/include/configs/omap4_common.h
index d8ac8c0b38..228eac5e37 100644
--- a/include/configs/omap4_common.h
+++ b/include/configs/omap4_common.h
@@ -98,7 +98,9 @@
#define CONFIG_I2C_MULTI_BUS 1
/* TWL6030 */
+#ifndef CONFIG_SPL_BUILD
#define CONFIG_TWL6030_POWER 1
+#endif
/* MMC */
#define CONFIG_GENERIC_MMC 1
diff --git a/include/configs/omap4_sdp4430.h b/include/configs/omap4_sdp4430.h
index 39d715480e..9e03291ce1 100644
--- a/include/configs/omap4_sdp4430.h
+++ b/include/configs/omap4_sdp4430.h
@@ -37,7 +37,9 @@
#include <configs/omap4_common.h>
/* Battery Charger */
+#ifndef CONFIG_SPL_BUILD
#define CONFIG_CMD_BAT 1
+#endif
/* ENV related config options */
#define CONFIG_ENV_IS_IN_MMC 1
diff --git a/include/configs/vision2.h b/include/configs/vision2.h
index b5c73571b3..d95c0ba444 100644
--- a/include/configs/vision2.h
+++ b/include/configs/vision2.h
@@ -41,6 +41,8 @@
#define CONFIG_INITRD_TAG
#define BOARD_LATE_INIT
+#define CONFIG_MACH_TYPE MACH_TYPE_TTC_VISION2
+
/*
* Size of malloc() pool
*/
diff --git a/include/configs/zmx25.h b/include/configs/zmx25.h
index 374c88a0f4..ab7f30f1e8 100644
--- a/include/configs/zmx25.h
+++ b/include/configs/zmx25.h
@@ -32,6 +32,7 @@
#define CONFIG_SYS_HZ 1000
#define CONFIG_SYS_TEXT_BASE 0xA0000000
+#define CONFIG_MACH_TYPE MACH_TYPE_ZMX25
/*
* Environment settings
*/
diff --git a/include/nand.h b/include/nand.h
index 8d94b5cbd7..b4140794c5 100644
--- a/include/nand.h
+++ b/include/nand.h
@@ -132,6 +132,12 @@ int nand_lock( nand_info_t *meminfo, int tight );
int nand_unlock( nand_info_t *meminfo, ulong start, ulong length );
int nand_get_lock_status(nand_info_t *meminfo, loff_t offset);
+int nand_spl_load_image(uint32_t offs, unsigned int size, void *dst);
+void nand_deselect(void);
+
+void nand_read_buf16(struct mtd_info *mtd, uint8_t *buf, int len);
+void nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len);
+
#ifdef CONFIG_SYS_NAND_SELECT_DEVICE
void board_nand_select_device(struct nand_chip *nand, int chip);
#endif
diff --git a/include/netdev.h b/include/netdev.h
index 96c7b9b5f2..480453e51d 100644
--- a/include/netdev.h
+++ b/include/netdev.h
@@ -61,8 +61,8 @@ int ep93xx_eth_initialize(u8 dev_num, int base_addr);
int eth_3com_initialize (bd_t * bis);
int ethoc_initialize(u8 dev_num, int base_addr);
int fec_initialize (bd_t *bis);
-int fecmxc_initialize (bd_t *bis);
int fecmxc_initialize(bd_t *bis);
+int fecmxc_initialize_multi(bd_t *bis, int dev_id, int phy_id, uint32_t addr);
int ftgmac100_initialize(bd_t *bits);
int ftmac100_initialize(bd_t *bits);
int greth_initialize(bd_t *bis);
@@ -94,6 +94,7 @@ int smc911x_initialize(u8 dev_num, int base_addr);
int tsi108_eth_initialize(bd_t *bis);
int uec_standard_init(bd_t *bis);
int uli526x_initialize(bd_t *bis);
+int armada100_fec_register(unsigned long base_addr);
int xilinx_emaclite_initialize (bd_t *bis, int base_addr);
/* Boards with PCI network controllers can call this from their board_eth_init()
@@ -185,4 +186,9 @@ struct mv88e61xx_config {
int mv88e61xx_switch_initialize(struct mv88e61xx_config *swconfig);
#endif /* CONFIG_MV88E61XX_SWITCH */
+/*
+ * Allow FEC to fine-tune MII configuration on boards which require this.
+ */
+int fecmxc_register_mii_postcall(struct eth_device *dev, int (*cb)(int));
+
#endif /* _NETDEV_H_ */
diff --git a/include/twl6030.h b/include/twl6030.h
index 6ed68a0e14..a9fcadbfef 100644
--- a/include/twl6030.h
+++ b/include/twl6030.h
@@ -33,6 +33,8 @@
#define TWL6030_CHIP_PWM 0x49
/* Slave Address 0x48 */
+#define VMMC_CFG_STATE 0x9A
+#define VMMC_CFG_VOLTATE 0x9B
#define VUSB_CFG_STATE 0xA2
#define MISC1 0xE4
@@ -130,3 +132,4 @@ void twl6030_start_usb_charging(void);
void twl6030_stop_usb_charging(void);
int twl6030_get_battery_voltage(void);
int twl6030_get_battery_current(void);
+void twl6030_power_mmc_init(void);