summaryrefslogtreecommitdiff
path: root/include
diff options
context:
space:
mode:
Diffstat (limited to 'include')
-rw-r--r--include/configs/apalis-tk1.h51
-rw-r--r--include/configs/apalis_imx6.h29
-rw-r--r--include/configs/colibri-imx6ull.h1
-rw-r--r--include/configs/colibri-imx8x.h8
-rw-r--r--include/configs/colibri_imx6.h29
-rw-r--r--include/configs/colibri_imx7.h28
-rw-r--r--include/configs/colibri_vf.h18
-rw-r--r--include/configs/mx6cuboxi.h6
-rw-r--r--include/configs/wandboard.h1
9 files changed, 26 insertions, 145 deletions
diff --git a/include/configs/apalis-tk1.h b/include/configs/apalis-tk1.h
index 965259c5e1..6f73606427 100644
--- a/include/configs/apalis-tk1.h
+++ b/include/configs/apalis-tk1.h
@@ -34,6 +34,20 @@
/* General networking support */
#define CONFIG_TFTP_TSIZE
+/*
+ * Custom Distro Boot configuration:
+ * 1. 8bit SD port (MMC1)
+ * 2. 4bit SD port (MMC2)
+ * 3. eMMC (MMC0)
+ */
+#define BOOT_TARGET_DEVICES(func) \
+ func(MMC, mmc, 1) \
+ func(MMC, mmc, 2) \
+ func(MMC, mmc, 0) \
+ func(USB, usb, 0) \
+ func(PXE, pxe, na) \
+ func(DHCP, dhcp, na)
+
#undef CONFIG_IPADDR
#define CONFIG_IPADDR 192.168.10.2
#define CONFIG_NETMASK 255.255.255.0
@@ -54,24 +68,6 @@
"update_uboot=run set_blkcnt && mmc dev 0 ${uboot_hwpart} && " \
"mmc write ${loadaddr} ${uboot_blk} ${blkcnt}\0" \
-#define EMMC_BOOTCMD \
- "set_emmcargs=setenv emmcargs ip=off root=PARTUUID=${uuid} " \
- "ro rootfstype=ext4 rootwait\0" \
- "emmcboot=run setup; run emmcfinduuid; run set_emmcargs; " \
- "setenv bootargs ${defargs} ${emmcargs} " \
- "${setupargs} ${vidargs}; echo Booting from internal eMMC; " \
- "run emmcdtbload; " \
- "load mmc ${emmcdev}:${emmcbootpart} ${kernel_addr_r} " \
- "${boot_file} && run fdt_fixup && " \
- "bootz ${kernel_addr_r} - ${dtbparam}\0" \
- "emmcbootpart=1\0" \
- "emmcdev=0\0" \
- "emmcdtbload=setenv dtbparam; load mmc ${emmcdev}:${emmcbootpart} " \
- "${fdt_addr_r} ${soc}-${fdt_module}-${fdt_board}.dtb && " \
- "setenv dtbparam ${fdt_addr_r}\0" \
- "emmcfinduuid=part uuid mmc ${mmcdev}:${emmcrootpart} uuid\0" \
- "emmcrootpart=2\0"
-
#define NFS_BOOTCMD \
"nfsargs=ip=:::::eth0:on root=/dev/nfs rw\0" \
"nfsboot=pci enum; run setup; setenv bootargs ${defargs} ${nfsargs} " \
@@ -82,23 +78,6 @@
"${soc}-${fdt_module}-${fdt_board}.dtb " \
"&& setenv dtbparam ${fdt_addr_r}\0"
-#define SD_BOOTCMD \
- "set_sdargs=setenv sdargs ip=off root=PARTUUID=${uuid} ro " \
- "rootfstype=ext4 rootwait\0" \
- "sdboot=run setup; run sdfinduuid; run set_sdargs; " \
- "setenv bootargs ${defargs} ${sdargs} ${setupargs} " \
- "${vidargs}; echo Booting from SD card in 8bit slot...; " \
- "run sddtbload; load mmc ${sddev}:${sdbootpart} " \
- "${kernel_addr_r} ${boot_file} && run fdt_fixup && " \
- "bootz ${kernel_addr_r} - ${dtbparam}\0" \
- "sdbootpart=1\0" \
- "sddev=1\0" \
- "sddtbload=setenv dtbparam; load mmc ${sddev}:${sdbootpart} " \
- "${fdt_addr_r} ${soc}-${fdt_module}-${fdt_board}.dtb " \
- "&& setenv dtbparam ${fdt_addr_r}\0" \
- "sdfinduuid=part uuid mmc ${sddev}:${sdrootpart} uuid\0" \
- "sdrootpart=2\0"
-
#define BOARD_EXTRA_ENV_SETTINGS \
"boot_file=zImage\0" \
"console=ttyS0\0" \
@@ -106,12 +85,10 @@
"usb_port_owner_info=2 lane_owner_info=6 emc_max_dvfs=0 " \
"user_debug=30 pcie_aspm=off\0" \
"dfu_alt_info=" DFU_ALT_EMMC_INFO "\0" \
- EMMC_BOOTCMD \
"fdt_board=eval\0" \
"fdt_fixup=;\0" \
"fdt_module=" FDT_MODULE "\0" \
NFS_BOOTCMD \
- SD_BOOTCMD \
UBOOT_UPDATE \
"setethupdate=if env exists ethaddr; then; else setenv ethaddr " \
"00:14:2d:00:00:00; fi; pci enum && tftpboot ${loadaddr} " \
diff --git a/include/configs/apalis_imx6.h b/include/configs/apalis_imx6.h
index 6fc7c3982c..38d0a6e2e9 100644
--- a/include/configs/apalis_imx6.h
+++ b/include/configs/apalis_imx6.h
@@ -93,9 +93,9 @@
#ifndef CONFIG_SPL_BUILD
#define BOOT_TARGET_DEVICES(func) \
- func(MMC, mmc, 0) \
func(MMC, mmc, 1) \
func(MMC, mmc, 2) \
+ func(MMC, mmc, 0) \
func(USB, usb, 0) \
func(DHCP, dhcp, na)
#include <config_distro_bootcmd.h>
@@ -105,14 +105,6 @@
#define BOOTENV
#endif /* CONFIG_SPL_BUILD */
-#define DFU_ALT_EMMC_INFO \
- "u-boot.imx raw 0x2 0x3ff mmcpart 0;" \
- "boot part 0 1;" \
- "rootfs part 0 2;" \
- "zImage fat 0 1;" \
- "imx6q-apalis-eval.dtb fat 0 1;" \
- "imx6q-apalis-cam-eval.dtb fat 0 1"
-
#define UBOOT_UPDATE \
"uboot_hwpart=1\0" \
"uboot_blk=8a\0" \
@@ -124,23 +116,6 @@
"update_spl=run set_blkcnt && mmc dev 0 ${uboot_hwpart} && " \
"mmc write ${loadaddr} ${uboot_spl_blk} ${blkcnt}\0"
-#define EMMC_BOOTCMD \
- "set_emmcargs=setenv emmcargs ip=off root=PARTUUID=${uuid} " \
- "ro,noatime rootfstype=ext4 rootwait\0" \
- "emmcboot=run setup; run emmcfinduuid; run set_emmcargs; " \
- "setenv bootargs ${defargs} ${emmcargs} ${setupargs} " \
- "${vidargs}; echo Booting from internal eMMC chip...; " \
- "run emmcdtbload; load mmc ${emmcdev}:${emmcbootpart} " \
- "${kernel_addr_r} ${boot_file} && run fdt_fixup && " \
- "bootz ${kernel_addr_r} ${dtbparam}\0" \
- "emmcbootpart=1\0" \
- "emmcdev=0\0" \
- "emmcdtbload=setenv dtbparam; load mmc ${emmcdev}:${emmcbootpart} " \
- "${fdt_addr_r} ${fdt_file} && " \
- "setenv dtbparam \" - ${fdt_addr_r}\" && true\0" \
- "emmcfinduuid=part uuid mmc ${mmcdev}:${emmcrootpart} uuid\0" \
- "emmcrootpart=2\0"
-
#define MEM_LAYOUT_ENV_SETTINGS \
"bootm_size=0x20000000\0" \
"fdt_addr_r=0x12100000\0" \
@@ -174,8 +149,6 @@
"boot_file=zImage\0" \
"console=ttymxc0\0" \
"defargs=enable_wait_mode=off vmalloc=400M\0" \
- "dfu_alt_info=" DFU_ALT_EMMC_INFO "\0" \
- EMMC_BOOTCMD \
"fdt_file=" FDT_FILE "\0" \
"fdt_fixup=;\0" \
MEM_LAYOUT_ENV_SETTINGS \
diff --git a/include/configs/colibri-imx6ull.h b/include/configs/colibri-imx6ull.h
index 2d3b4c1817..c80fb96fe2 100644
--- a/include/configs/colibri-imx6ull.h
+++ b/include/configs/colibri-imx6ull.h
@@ -88,6 +88,7 @@
NFS_BOOTCMD \
UBI_BOOTCMD \
UBOOT_UPDATE \
+ "bootubipart=ubi\0" \
"console=ttymxc0\0" \
"defargs=user_debug=30\0" \
"dfu_alt_info=" DFU_ALT_NAND_INFO "\0" \
diff --git a/include/configs/colibri-imx8x.h b/include/configs/colibri-imx8x.h
index da9226e2fb..7d007071e5 100644
--- a/include/configs/colibri-imx8x.h
+++ b/include/configs/colibri-imx8x.h
@@ -62,7 +62,7 @@
#define BOOTENV_RUN_NET_USB_START ""
#define CONFIG_MFG_ENV_SETTINGS \
- "mfgtool_args=setenv bootargs console=${console},${baudrate} " \
+ "mfgtool_args=setenv bootargs ${consoleargs} " \
"rdinit=/linuxrc g_mass_storage.stall=0 " \
"g_mass_storage.removable=1 g_mass_storage.idVendor=0x066F " \
"g_mass_storage.idProduct=0x37FF " \
@@ -81,7 +81,7 @@
M4_BOOT_ENV \
MEM_LAYOUT_ENV_SETTINGS \
"boot_file=Image\0" \
- "console=ttyLP3 earlycon\0" \
+ "consoleargs=console=ttyLP3,${baudrate} earlycon\0" \
"fdt_addr=0x83000000\0" \
"fdt_file=fsl-imx8qxp-colibri-dsihdmi-eval-v3.dtb\0" \
"fdtfile=fsl-imx8qxp-colibri-dsihdmi-eval-v3.dtb\0" \
@@ -89,11 +89,11 @@
"image=Image\0" \
"initrd_addr=0x83800000\0" \
"initrd_high=0xffffffffffffffff\0" \
- "mmcargs=setenv bootargs console=${console},${baudrate} " \
+ "mmcargs=setenv bootargs ${consoleargs} " \
"root=PARTUUID=${uuid} rootwait " \
"mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
"mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
- "netargs=setenv bootargs console=${console},${baudrate} " \
+ "netargs=setenv bootargs ${consoleargs} " \
"root=/dev/nfs ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp " \
"${vidargs}\0" \
"nfsboot=run netargs; dhcp ${loadaddr} ${image}; tftp ${fdt_addr} " \
diff --git a/include/configs/colibri_imx6.h b/include/configs/colibri_imx6.h
index 0a52a701c6..f5f86f083c 100644
--- a/include/configs/colibri_imx6.h
+++ b/include/configs/colibri_imx6.h
@@ -83,6 +83,7 @@
#define BOOT_TARGET_DEVICES(func) \
func(MMC, mmc, 0) \
func(MMC, mmc, 1) \
+ func(MMC, mmc, 0) \
func(USB, usb, 0) \
func(DHCP, dhcp, na)
#include <config_distro_bootcmd.h>
@@ -92,14 +93,6 @@
#define BOOTENV
#endif /* CONFIG_SPL_BUILD */
-#define DFU_ALT_EMMC_INFO \
- "u-boot.imx raw 0x2 0x3ff mmcpart 0;" \
- "boot part 0 1;" \
- "rootfs part 0 2;" \
- "zImage fat 0 1;" \
- "imx6dl-colibri-eval-v3.dtb fat 0 1;" \
- "imx6dl-colibri-cam-eval-v3.dtb fat 0 1"
-
#define UBOOT_UPDATE \
"uboot_hwpart=1\0" \
"uboot_blk=8a\0" \
@@ -111,24 +104,6 @@
"update_spl=run set_blkcnt && mmc dev 0 ${uboot_hwpart} && " \
"mmc write ${loadaddr} ${uboot_spl_blk} ${blkcnt}\0"
-#define EMMC_BOOTCMD \
- "set_emmcargs=setenv emmcargs ip=off root=PARTUUID=${uuid} "\
- "rw,noatime rootfstype=ext4 " \
- "rootwait\0" \
- "emmcboot=run setup; run emmcfinduuid; run set_emmcargs; " \
- "setenv bootargs ${defargs} ${emmcargs} ${setupargs} " \
- "${vidargs}; echo Booting from internal eMMC chip...; " \
- "run emmcdtbload; load mmc ${emmcdev}:${emmcbootpart} " \
- "${kernel_addr_r} ${boot_file} && run fdt_fixup && " \
- "bootz ${kernel_addr_r} ${dtbparam}\0" \
- "emmcbootpart=1\0" \
- "emmcdev=0\0" \
- "emmcdtbload=setenv dtbparam; load mmc ${emmcdev}:${emmcbootpart} " \
- "${fdt_addr_r} ${fdt_file} && " \
- "setenv dtbparam \" - ${fdt_addr_r}\" && true\0" \
- "emmcfinduuid=part uuid mmc ${mmcdev}:${emmcrootpart} uuid\0" \
- "emmcrootpart=2\0"
-
#define MEM_LAYOUT_ENV_SETTINGS \
"bootm_size=0x10000000\0" \
"fdt_addr_r=0x12100000\0" \
@@ -157,8 +132,6 @@
"boot_file=zImage\0" \
"console=ttymxc0\0" \
"defargs=enable_wait_mode=off galcore.contiguousSize=50331648\0" \
- "dfu_alt_info=" DFU_ALT_EMMC_INFO "\0" \
- EMMC_BOOTCMD \
"fdt_file=" FDT_FILE "\0" \
"fdt_fixup=;\0" \
MEM_LAYOUT_ENV_SETTINGS \
diff --git a/include/configs/colibri_imx7.h b/include/configs/colibri_imx7.h
index 09722f47e7..1afa9373a1 100644
--- a/include/configs/colibri_imx7.h
+++ b/include/configs/colibri_imx7.h
@@ -88,29 +88,13 @@
"mmc read ${android_fdt_addr} ${env_start} ${env_size}; " \
"bootm ${loadaddr} ${loadaddr} ${android_fdt_addr}\0 "
-#define EMMC_BOOTCMD \
- "set_emmcargs=setenv emmcargs ip=off root=PARTUUID=${uuid} ro " \
- "rootfstype=ext4 rootwait\0" \
- "emmcboot=run setup; run emmcfinduuid; run set_emmcargs; " \
- "setenv bootargs ${defargs} ${emmcargs} ${setupargs} " \
- "${vidargs}; echo Booting from internal eMMC chip...; " \
- "run m4boot && " \
- "load mmc ${emmcdev}:${emmcbootpart} ${fdt_addr_r} " \
- "${soc}-colibri-emmc-${fdt_board}.dtb && " \
- "load mmc ${emmcdev}:${emmcbootpart} ${kernel_addr_r} " \
- "${boot_file} && run fdt_fixup && " \
- "bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
- "emmcbootpart=1\0" \
- "emmcdev=0\0" \
- "emmcfinduuid=part uuid mmc ${emmcdev}:${emmcrootpart} uuid\0" \
- "emmcrootpart=2\0"
-
#define MEM_LAYOUT_ENV_SETTINGS \
"bootm_size=0x10000000\0" \
"fdt_addr_r=0x82000000\0" \
"kernel_addr_r=0x81000000\0" \
+ "pxefile_addr_r=0x87100000\0" \
"ramdisk_addr_r=0x82100000\0" \
- "scriptaddr=0x82500000\0"
+ "scriptaddr=0x87000000\0"
#define NFS_BOOTCMD \
"nfsargs=ip=:::::eth0: root=/dev/nfs\0" \
@@ -143,7 +127,6 @@
"setenv fdtfile ${soc}-colibri-emmc-${fdt_board}.dtb && run distro_bootcmd;"
#define MODULE_EXTRA_ENV_SETTINGS \
"variant=-emmc\0" \
- EMMC_BOOTCMD \
EMMC_ANDROID_BOOTCMD
#endif
@@ -154,8 +137,8 @@
func(DHCP, dhcp, na)
#elif defined(CONFIG_TARGET_COLIBRI_IMX7_EMMC)
#define BOOT_TARGET_DEVICES(func) \
- func(MMC, mmc, 0) \
func(MMC, mmc, 1) \
+ func(MMC, mmc, 0) \
func(USB, usb, 0) \
func(DHCP, dhcp, na)
#endif
@@ -168,6 +151,7 @@
MODULE_EXTRA_ENV_SETTINGS \
UBOOT_UPDATE \
"boot_file=zImage\0" \
+ "bootubipart=ubi\0" \
"console=ttymxc0\0" \
"defargs=\0" \
"fdt_board=eval-v3\0" \
@@ -237,10 +221,6 @@
#define CONFIG_USBD_HS
-/* USB Device Firmware Update support */
-#define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_16M
-#define DFU_DEFAULT_POLL_TIMEOUT 300
-
#if defined(CONFIG_VIDEO) || defined(CONFIG_DM_VIDEO)
#define CONFIG_VIDEO_MXS
#define CONFIG_VIDEO_LOGO
diff --git a/include/configs/colibri_vf.h b/include/configs/colibri_vf.h
index 7d17bd8e6a..012350d9bf 100644
--- a/include/configs/colibri_vf.h
+++ b/include/configs/colibri_vf.h
@@ -69,21 +69,6 @@
"tftp ${fdt_addr_r} ${soc}-colibri-${fdt_board}.dtb && " \
"run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
-#define SD_BOOTCMD \
- "set_sdargs=setenv sdargs root=PARTUUID=${uuid} ro rootwait\0" \
- "sdboot=run setup; run sdfinduuid; run set_sdargs; " \
- "setenv bootargs ${defargs} ${sdargs} ${mtdparts} " \
- "${setupargs} ${vidargs}; echo Booting from MMC/SD card...; " \
- "load mmc ${sddev}:${sdbootpart} ${kernel_addr_r} ${kernel_file} && " \
- "load mmc ${sddev}:${sdbootpart} ${fdt_addr_r} " \
- "${soc}-colibri-${fdt_board}.dtb && " \
- "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
- "sdbootpart=1\0" \
- "sddev=0\0" \
- "sdfinduuid=part uuid mmc ${sddev}:${sdrootpart} uuid\0" \
- "sdrootpart=2\0"
-
-
#define UBI_BOOTCMD \
"ubiargs=ubi.mtd=ubi root=ubi0:rootfs rootfstype=ubifs " \
"ubi.fm_autoconvert=1\0" \
@@ -112,7 +97,6 @@
BOOTENV \
MEM_LAYOUT_ENV_SETTINGS \
NFS_BOOTCMD \
- SD_BOOTCMD \
UBI_BOOTCMD \
UBOOT_UPDATE \
"console=ttyLP0\0" \
@@ -120,7 +104,7 @@
"dfu_alt_info=" DFU_ALT_NAND_INFO "\0" \
"fdt_board=eval-v3\0" \
"fdt_fixup=;\0" \
- "kernel_file=zImage\0" \
+ "kernel_image=zImage\0" \
"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
"setsdupdate=mmc rescan && set interface mmc && " \
"fatload ${interface} 0:1 ${loadaddr} flash_blk.img && " \
diff --git a/include/configs/mx6cuboxi.h b/include/configs/mx6cuboxi.h
index 2ccf44e573..96f79e6b58 100644
--- a/include/configs/mx6cuboxi.h
+++ b/include/configs/mx6cuboxi.h
@@ -29,12 +29,6 @@
#define CONFIG_LBA48
#endif
-/* Ethernet Configuration */
-#define CONFIG_FEC_MXC
-#define IMX_FEC_BASE ENET_BASE_ADDR
-#define CONFIG_FEC_XCV_TYPE RGMII
-#define CONFIG_FEC_MXC_PHYADDR 0
-
/* Framebuffer */
#define CONFIG_VIDEO_BMP_RLE8
#define CONFIG_SPLASH_SCREEN
diff --git a/include/configs/wandboard.h b/include/configs/wandboard.h
index 2b0576e1e6..c798ca64bf 100644
--- a/include/configs/wandboard.h
+++ b/include/configs/wandboard.h
@@ -17,7 +17,6 @@
/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN (10 * SZ_1M)
-#define CONFIG_MXC_UART
#define CONFIG_MXC_UART_BASE UART1_BASE
/* SATA Configs */
generated by cgit (git 2.34.1) at 2024-12-26 19:20:17 +0000