diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/axp809.h | 60 | ||||
| -rw-r--r-- | include/axp818.h | 4 | ||||
| -rw-r--r-- | include/axp_pmic.h | 4 | ||||
| -rw-r--r-- | include/configs/T208xQDS.h | 4 | ||||
| -rw-r--r-- | include/configs/sunxi-common.h | 30 | ||||
| -rw-r--r-- | include/configs/uniphier.h | 12 |
6 files changed, 107 insertions, 7 deletions
diff --git a/include/axp809.h b/include/axp809.h new file mode 100644 index 0000000000..d27fb978d2 --- /dev/null +++ b/include/axp809.h @@ -0,0 +1,60 @@ +/* + * (C) Copyright 2016 Chen-Yu Tsai <wens@csie.org> + * + * X-Powers AXP809 Power Management IC driver + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#define AXP809_CHIP_ID 0x03 + +#define AXP809_OUTPUT_CTRL1 0x10 +#define AXP809_OUTPUT_CTRL1_DC5LDO_EN (1 << 0) +#define AXP809_OUTPUT_CTRL1_DCDC1_EN (1 << 1) +#define AXP809_OUTPUT_CTRL1_DCDC2_EN (1 << 2) +#define AXP809_OUTPUT_CTRL1_DCDC3_EN (1 << 3) +#define AXP809_OUTPUT_CTRL1_DCDC4_EN (1 << 4) +#define AXP809_OUTPUT_CTRL1_DCDC5_EN (1 << 5) +#define AXP809_OUTPUT_CTRL1_ALDO1_EN (1 << 6) +#define AXP809_OUTPUT_CTRL1_ALDO2_EN (1 << 7) +#define AXP809_OUTPUT_CTRL2 0x12 +#define AXP809_OUTPUT_CTRL2_ELDO1_EN (1 << 0) +#define AXP809_OUTPUT_CTRL2_ELDO2_EN (1 << 1) +#define AXP809_OUTPUT_CTRL2_ELDO3_EN (1 << 2) +#define AXP809_OUTPUT_CTRL2_DLDO1_EN (1 << 3) +#define AXP809_OUTPUT_CTRL2_DLDO2_EN (1 << 4) +#define AXP809_OUTPUT_CTRL2_ALDO3_EN (1 << 5) +#define AXP809_OUTPUT_CTRL2_SWOUT_EN (1 << 6) +#define AXP809_OUTPUT_CTRL2_DC1SW_EN (1 << 7) + +#define AXP809_DLDO1_CTRL 0x15 +#define AXP809_DLDO2_CTRL 0x16 +#define AXP809_ELDO1_CTRL 0x19 +#define AXP809_ELDO2_CTRL 0x1a +#define AXP809_ELDO3_CTRL 0x1b +#define AXP809_DC5LDO_CTRL 0x1c +#define AXP809_DCDC1_CTRL 0x21 +#define AXP809_DCDC2_CTRL 0x22 +#define AXP809_DCDC3_CTRL 0x23 +#define AXP809_DCDC4_CTRL 0x24 +#define AXP809_DCDC5_CTRL 0x25 +#define AXP809_ALDO1_CTRL 0x28 +#define AXP809_ALDO2_CTRL 0x29 +#define AXP809_ALDO3_CTRL 0x2a +#define AXP809_SHUTDOWN 0x32 +#define AXP809_SHUTDOWN_POWEROFF (1 << 7) + +/* For axp_gpio.c */ +#define AXP_POWER_STATUS 0x00 +#define AXP_POWER_STATUS_VBUS_PRESENT (1 << 5) +#define AXP_VBUS_IPSOUT 0x30 +#define AXP_VBUS_IPSOUT_DRIVEBUS (1 << 2) +#define AXP_MISC_CTRL 0x8f +#define AXP_MISC_CTRL_N_VBUSEN_FUNC (1 << 4) +#define AXP_GPIO0_CTRL 0x90 +#define AXP_GPIO1_CTRL 0x92 +#define AXP_GPIO_CTRL_OUTPUT_LOW 0x00 /* Drive pin low */ +#define AXP_GPIO_CTRL_OUTPUT_HIGH 0x01 /* Drive pin high */ +#define AXP_GPIO_CTRL_INPUT 0x02 /* Input */ +#define AXP_GPIO_STATE 0x94 +#define AXP_GPIO_STATE_OFFSET 0 diff --git a/include/axp818.h b/include/axp818.h index 5630eed04d..959774c76f 100644 --- a/include/axp818.h +++ b/include/axp818.h @@ -24,6 +24,7 @@ #define AXP818_OUTPUT_CTRL2_DLDO2_EN (1 << 4) #define AXP818_OUTPUT_CTRL2_DLDO3_EN (1 << 5) #define AXP818_OUTPUT_CTRL2_DLDO4_EN (1 << 6) +#define AXP818_OUTPUT_CTRL2_SW_EN (1 << 7) #define AXP818_OUTPUT_CTRL3 0x13 #define AXP818_OUTPUT_CTRL3_FLDO1_EN (1 << 2) #define AXP818_OUTPUT_CTRL3_FLDO2_EN (1 << 3) @@ -54,6 +55,9 @@ #define AXP818_ALDO2_CTRL 0x29 #define AXP818_ALDO3_CTRL 0x2a +#define AXP818_SHUTDOWN 0x32 +#define AXP818_SHUTDOWN_POWEROFF (1 << 7) + /* For axp_gpio.c */ #define AXP_POWER_STATUS 0x00 #define AXP_POWER_STATUS_VBUS_PRESENT (1 << 5) diff --git a/include/axp_pmic.h b/include/axp_pmic.h index b203cc88dd..d789ad8086 100644 --- a/include/axp_pmic.h +++ b/include/axp_pmic.h @@ -16,6 +16,9 @@ #ifdef CONFIG_AXP221_POWER #include <axp221.h> #endif +#ifdef CONFIG_AXP809_POWER +#include <axp809.h> +#endif #ifdef CONFIG_AXP818_POWER #include <axp818.h> #endif @@ -32,6 +35,7 @@ int axp_set_aldo4(unsigned int mvolt); int axp_set_dldo(int dldo_num, unsigned int mvolt); int axp_set_eldo(int eldo_num, unsigned int mvolt); int axp_set_fldo(int fldo_num, unsigned int mvolt); +int axp_set_sw(bool on); int axp_init(void); int axp_get_sid(unsigned int *sid); diff --git a/include/configs/T208xQDS.h b/include/configs/T208xQDS.h index d8c57a833b..f48697c033 100644 --- a/include/configs/T208xQDS.h +++ b/include/configs/T208xQDS.h @@ -291,6 +291,10 @@ unsigned long get_board_ddr_clk(void); #define QIXIS_LBMAP_SHIFT 0 #define QIXIS_LBMAP_DFLTBANK 0x00 #define QIXIS_LBMAP_ALTBANK 0x04 +#define QIXIS_LBMAP_NAND 0x09 +#define QIXIS_LBMAP_SD 0x00 +#define QIXIS_RCW_SRC_NAND 0x104 +#define QIXIS_RCW_SRC_SD 0x040 #define QIXIS_RST_CTL_RESET 0x83 #define QIXIS_RST_FORCE_MEM 0x1 #define QIXIS_RCFG_CTL_RECONFIG_IDLE 0x20 diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h index ac2d93114b..b33cfb86f8 100644 --- a/include/configs/sunxi-common.h +++ b/include/configs/sunxi-common.h @@ -189,14 +189,14 @@ #define CONFIG_SPL_BOARD_LOAD_IMAGE #if defined(CONFIG_MACH_SUN9I) -#define CONFIG_SPL_TEXT_BASE 0x10020 /* sram start+header */ -#define CONFIG_SPL_MAX_SIZE 0x5fe0 /* ? KiB on sun9i */ +#define CONFIG_SPL_TEXT_BASE 0x10040 /* sram start+header */ +#define CONFIG_SPL_MAX_SIZE 0x5fc0 /* ? KiB on sun9i */ #elif defined(CONFIG_MACH_SUN50I) -#define CONFIG_SPL_TEXT_BASE 0x10020 /* sram start+header */ -#define CONFIG_SPL_MAX_SIZE 0x7fe0 /* 32 KiB on sun50i */ +#define CONFIG_SPL_TEXT_BASE 0x10040 /* sram start+header */ +#define CONFIG_SPL_MAX_SIZE 0x7fc0 /* 32 KiB on sun50i */ #else -#define CONFIG_SPL_TEXT_BASE 0x20 /* sram start+header */ -#define CONFIG_SPL_MAX_SIZE 0x5fe0 /* 24KB on sun4i/sun7i */ +#define CONFIG_SPL_TEXT_BASE 0x40 /* sram start+header */ +#define CONFIG_SPL_MAX_SIZE 0x5fc0 /* 24KB on sun4i/sun7i */ #endif #define CONFIG_SPL_LIBDISK_SUPPORT @@ -390,6 +390,23 @@ extern int soft_i2c_gpio_scl; #define CONFIG_PRE_CONSOLE_BUFFER #define CONFIG_PRE_CON_BUF_SZ 4096 /* Aprox 2 80*25 screens */ +#ifdef CONFIG_ARM64 +/* + * Boards seem to come with at least 512MB of DRAM. + * The kernel should go at 512K, which is the default text offset (that will + * be adjusted at runtime if needed). + * There is no compression for arm64 kernels (yet), so leave some space + * for really big kernels, say 256MB for now. + * Scripts, PXE and DTBs should go afterwards, leaving the rest for the initrd. + * Align the initrd to a 2MB page. + */ +#define KERNEL_ADDR_R __stringify(SDRAM_OFFSET(0080000)) +#define FDT_ADDR_R __stringify(SDRAM_OFFSET(FA00000)) +#define SCRIPT_ADDR_R __stringify(SDRAM_OFFSET(FC00000)) +#define PXEFILE_ADDR_R __stringify(SDRAM_OFFSET(FD00000)) +#define RAMDISK_ADDR_R __stringify(SDRAM_OFFSET(FE00000)) + +#else /* * 160M RAM (256M minimum minus 64MB heap + 32MB for u-boot, stack, fb, etc. * 32M uncompressed kernel, 16M compressed kernel, 1M fdt, @@ -401,6 +418,7 @@ extern int soft_i2c_gpio_scl; #define SCRIPT_ADDR_R __stringify(SDRAM_OFFSET(3100000)) #define PXEFILE_ADDR_R __stringify(SDRAM_OFFSET(3200000)) #define RAMDISK_ADDR_R __stringify(SDRAM_OFFSET(3300000)) +#endif #define MEM_LAYOUT_ENV_SETTINGS \ "bootm_size=0xa000000\0" \ diff --git a/include/configs/uniphier.h b/include/configs/uniphier.h index 18cb963844..10fd8c21ea 100644 --- a/include/configs/uniphier.h +++ b/include/configs/uniphier.h @@ -104,7 +104,11 @@ #define COUNTER_FREQUENCY 50000000 #define CONFIG_GICV3 #define GICD_BASE 0x5fe00000 +#if defined(CONFIG_ARCH_UNIPHIER_LD11) +#define GICR_BASE 0x5fe40000 +#elif defined(CONFIG_ARCH_UNIPHIER_LD20) #define GICR_BASE 0x5fe80000 +#endif #else /* Time clock 1MHz */ #define CONFIG_SYS_TIMER_RATE 1000000 @@ -270,7 +274,9 @@ #define CONFIG_SPL_TEXT_BASE 0x00100000 #endif -#if defined(CONFIG_ARCH_UNIPHIER_LD20) +#if defined(CONFIG_ARCH_UNIPHIER_LD11) +#define CONFIG_SPL_STACK (0x30014c00) +#elif defined(CONFIG_ARCH_UNIPHIER_LD20) #define CONFIG_SPL_STACK (0x3001c000) #else #define CONFIG_SPL_STACK (0x00100000) @@ -301,7 +307,11 @@ #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" #define CONFIG_SPL_MAX_FOOTPRINT 0x10000 #define CONFIG_SPL_MAX_SIZE 0x10000 +#if defined(CONFIG_ARCH_UNIPHIER_LD11) +#define CONFIG_SPL_BSS_START_ADDR 0x30012000 +#elif defined(CONFIG_ARCH_UNIPHIER_LD20) #define CONFIG_SPL_BSS_START_ADDR 0x30016000 +#endif #define CONFIG_SPL_BSS_MAX_SIZE 0x2000 #endif /* __CONFIG_UNIPHIER_COMMON_H__ */ |