diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/configs/UCP1020.h | 1 | ||||
| -rw-r--r-- | include/mmc.h | 37 | ||||
| -rw-r--r-- | include/mvebu_mmc.h | 4 |
3 files changed, 25 insertions, 17 deletions
diff --git a/include/configs/UCP1020.h b/include/configs/UCP1020.h index 268a41c82c..6a01a90425 100644 --- a/include/configs/UCP1020.h +++ b/include/configs/UCP1020.h @@ -438,7 +438,6 @@ #ifdef CONFIG_MMC #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR -#define CONFIG_MMC_SPI #endif /* Misc Extra Settings */ diff --git a/include/mmc.h b/include/mmc.h index 1f30f71d25..46422f41a4 100644 --- a/include/mmc.h +++ b/include/mmc.h @@ -65,6 +65,11 @@ #define MMC_MODE_DDR_52MHz MMC_CAP(MMC_DDR_52) #define MMC_MODE_HS200 MMC_CAP(MMC_HS_200) #define MMC_MODE_HS400 MMC_CAP(MMC_HS_400) +#define MMC_MODE_HS400_ES MMC_CAP(MMC_HS_400_ES) + +#define MMC_CAP_NONREMOVABLE BIT(14) +#define MMC_CAP_NEEDS_POLL BIT(15) +#define MMC_CAP_CD_ACTIVE_HIGH BIT(16) #define MMC_MODE_8BIT BIT(30) #define MMC_MODE_4BIT BIT(29) @@ -219,13 +224,16 @@ static inline bool mmc_is_tuning_cmd(uint cmdidx) #define EXT_CSD_BOOT_BUS_WIDTH 177 #define EXT_CSD_PART_CONF 179 /* R/W */ #define EXT_CSD_BUS_WIDTH 183 /* R/W */ +#define EXT_CSD_STROBE_SUPPORT 184 /* R/W */ #define EXT_CSD_HS_TIMING 185 /* R/W */ #define EXT_CSD_REV 192 /* RO */ #define EXT_CSD_CARD_TYPE 196 /* RO */ +#define EXT_CSD_PART_SWITCH_TIME 199 /* RO */ #define EXT_CSD_SEC_CNT 212 /* RO, 4 bytes */ #define EXT_CSD_HC_WP_GRP_SIZE 221 /* RO */ #define EXT_CSD_HC_ERASE_GRP_SIZE 224 /* RO */ #define EXT_CSD_BOOT_MULT 226 /* RO */ +#define EXT_CSD_GENERIC_CMD6_TIME 248 /* RO */ #define EXT_CSD_BKOPS_SUPPORT 502 /* RO */ /* @@ -260,11 +268,13 @@ static inline bool mmc_is_tuning_cmd(uint cmdidx) #define EXT_CSD_DDR_BUS_WIDTH_4 5 /* Card is in 4 bit DDR mode */ #define EXT_CSD_DDR_BUS_WIDTH_8 6 /* Card is in 8 bit DDR mode */ #define EXT_CSD_DDR_FLAG BIT(2) /* Flag for DDR mode */ +#define EXT_CSD_BUS_WIDTH_STROBE BIT(7) /* Enhanced strobe mode */ #define EXT_CSD_TIMING_LEGACY 0 /* no high speed */ #define EXT_CSD_TIMING_HS 1 /* HS */ #define EXT_CSD_TIMING_HS200 2 /* HS200 */ #define EXT_CSD_TIMING_HS400 3 /* HS400 */ +#define EXT_CSD_DRV_STR_SHIFT 4 /* Driver Strength shift */ #define EXT_CSD_BOOT_ACK_ENABLE (1 << 6) #define EXT_CSD_BOOT_PARTITION_ENABLE (1 << 3) @@ -415,14 +425,6 @@ struct dm_mmc_ops { int (*set_ios)(struct udevice *dev); /** - * send_init_stream() - send the initialization stream: 74 clock cycles - * This is used after power up before sending the first command - * - * @dev: Device to update - */ - void (*send_init_stream)(struct udevice *dev); - - /** * get_cd() - See whether a card is present * * @dev: Device to check @@ -449,7 +451,6 @@ struct dm_mmc_ops { int (*execute_tuning)(struct udevice *dev, uint opcode); #endif -#if CONFIG_IS_ENABLED(MMC_UHS_SUPPORT) /** * wait_dat0() - wait until dat0 is in the target state * (CLK must be running during the wait) @@ -460,6 +461,10 @@ struct dm_mmc_ops { * @return 0 if dat0 is in the target state, -ve on error */ int (*wait_dat0)(struct udevice *dev, int state, int timeout); + +#if CONFIG_IS_ENABLED(MMC_HS400_ES_SUPPORT) + /* set_enhanced_strobe() - set HS400 enhanced strobe */ + int (*set_enhanced_strobe)(struct udevice *dev); #endif }; @@ -468,7 +473,6 @@ struct dm_mmc_ops { int dm_mmc_send_cmd(struct udevice *dev, struct mmc_cmd *cmd, struct mmc_data *data); int dm_mmc_set_ios(struct udevice *dev); -void dm_mmc_send_init_stream(struct udevice *dev); int dm_mmc_get_cd(struct udevice *dev); int dm_mmc_get_wp(struct udevice *dev); int dm_mmc_execute_tuning(struct udevice *dev, uint opcode); @@ -476,11 +480,11 @@ int dm_mmc_wait_dat0(struct udevice *dev, int state, int timeout); /* Transition functions for compatibility */ int mmc_set_ios(struct mmc *mmc); -void mmc_send_init_stream(struct mmc *mmc); int mmc_getcd(struct mmc *mmc); int mmc_getwp(struct mmc *mmc); int mmc_execute_tuning(struct mmc *mmc, uint opcode); int mmc_wait_dat0(struct mmc *mmc, int state, int timeout); +int mmc_set_enhanced_strobe(struct mmc *mmc); #else struct mmc_ops { @@ -526,6 +530,7 @@ enum bus_mode { UHS_SDR104, MMC_HS_200, MMC_HS_400, + MMC_HS_400_ES, MMC_MODES_END }; @@ -544,6 +549,10 @@ static inline bool mmc_is_mode_ddr(enum bus_mode mode) else if (mode == MMC_HS_400) return true; #endif +#if CONFIG_IS_ENABLED(MMC_HS400_ES_SUPPORT) + else if (mode == MMC_HS_400_ES) + return true; +#endif else return false; } @@ -593,6 +602,8 @@ struct mmc { u8 part_attr; u8 wr_rel_set; u8 part_config; + u8 gen_cmd6_time; + u8 part_switch_time; uint tran_speed; uint legacy_speed; /* speed for the legacy mode provided by the card */ uint read_bl_len; @@ -828,7 +839,6 @@ void mmc_set_preinit(struct mmc *mmc, int preinit); #else #define mmc_host_is_spi(mmc) 0 #endif -struct mmc *mmc_spi_init(uint bus, uint cs, uint speed, uint mode); void board_mmc_power_init(void); int board_mmc_init(bd_t *bis); @@ -839,6 +849,9 @@ extern uint mmc_get_env_part(struct mmc *mmc); # endif int mmc_get_env_dev(void); +/* Minimum partition switch timeout in units of 10-milliseconds */ +#define MMC_MIN_PART_SWITCH_TIME 30 /* 300 ms */ + /* Set block count limit because of 16 bit register limit on some hardware*/ #ifndef CONFIG_SYS_MMC_MAX_BLK_COUNT #define CONFIG_SYS_MMC_MAX_BLK_COUNT 65535 diff --git a/include/mvebu_mmc.h b/include/mvebu_mmc.h index d51b1fe467..7397165f67 100644 --- a/include/mvebu_mmc.h +++ b/include/mvebu_mmc.h @@ -222,13 +222,9 @@ #define MMC_CAP_SDIO_IRQ (1 << 3) /* Talks only SPI protocols */ #define MMC_CAP_SPI (1 << 4) -/* Needs polling for card-detection */ -#define MMC_CAP_NEEDS_POLL (1 << 5) /* Can the host do 8 bit transfers */ #define MMC_CAP_8_BIT_DATA (1 << 6) -/* Nonremovable e.g. eMMC */ -#define MMC_CAP_NONREMOVABLE (1 << 8) /* Waits while card is busy */ #define MMC_CAP_WAIT_WHILE_BUSY (1 << 9) /* Allow erase/trim commands */ |