summaryrefslogtreecommitdiff
path: root/include
diff options
context:
space:
mode:
Diffstat (limited to 'include')
-rw-r--r--include/asm-blackfin/blackfin-config-post.h84
-rw-r--r--include/asm-blackfin/blackfin_local.h2
-rw-r--r--include/asm-blackfin/mach-common/bits/bootrom.h72
-rw-r--r--include/asm-blackfin/mach-common/bits/ebiu.h21
-rw-r--r--include/asm-blackfin/mach-common/bits/otp.h21
-rw-r--r--include/configs/bf533-ezkit.h2
-rw-r--r--include/configs/bf533-stamp.h2
-rw-r--r--include/configs/bf537-stamp.h43
-rw-r--r--include/devices.h3
-rw-r--r--include/status_led.h3
10 files changed, 163 insertions, 90 deletions
diff --git a/include/asm-blackfin/blackfin-config-post.h b/include/asm-blackfin/blackfin-config-post.h
index 0ab68ace75..21abd724fb 100644
--- a/include/asm-blackfin/blackfin-config-post.h
+++ b/include/asm-blackfin/blackfin-config-post.h
@@ -1,7 +1,7 @@
/*
* blackfin-config-post.h - setup common defines for Blackfin boards based on config.h
*
- * Copyright (c) 2007 Analog Devices Inc.
+ * Copyright (c) 2007-2008 Analog Devices Inc.
*
* Licensed under the GPL-2 or later.
*/
@@ -9,11 +9,6 @@
#ifndef __ASM_BLACKFIN_CONFIG_POST_H__
#define __ASM_BLACKFIN_CONFIG_POST_H__
-/* Check to make sure everything fits in external RAM */
-#if ((CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) > CONFIG_SYS_MAX_RAM_SIZE)
-# error Memory Map does not fit into configuration
-#endif
-
/* Sanity check CONFIG_BFIN_CPU */
#ifndef CONFIG_BFIN_CPU
# error CONFIG_BFIN_CPU: your board config needs to define this
@@ -65,8 +60,81 @@
#endif
/* Using L1 scratch pad makes sense for everyone by default. */
-#ifndef CMD_LINE_ADDR
-# define CMD_LINE_ADDR L1_SRAM_SCRATCH
+#ifndef CONFIG_LINUX_CMDLINE_ADDR
+# define CONFIG_LINUX_CMDLINE_ADDR L1_SRAM_SCRATCH
+#endif
+#ifndef CONFIG_LINUX_CMDLINE_SIZE
+# define CONFIG_LINUX_CMDLINE_SIZE L1_SRAM_SCRATCH_SIZE
+#endif
+
+/* Default/common Blackfin memory layout */
+#ifndef CONFIG_SYS_SDRAM_BASE
+# define CONFIG_SYS_SDRAM_BASE 0
+#endif
+#ifndef CONFIG_SYS_MAX_RAM_SIZE
+# define CONFIG_SYS_MAX_RAM_SIZE (CONFIG_MEM_SIZE * 1024 * 1024)
+#endif
+#ifndef CONFIG_SYS_MONITOR_BASE
+# define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_MAX_RAM_SIZE - CONFIG_SYS_MONITOR_LEN)
+#endif
+#ifndef CONFIG_SYS_MALLOC_BASE
+# define CONFIG_SYS_MALLOC_BASE (CONFIG_SYS_MONITOR_BASE - CONFIG_SYS_MALLOC_LEN)
+#endif
+#ifndef CONFIG_SYS_GBL_DATA_SIZE
+# define CONFIG_SYS_GBL_DATA_SIZE (128)
+#endif
+#ifndef CONFIG_SYS_GBL_DATA_ADDR
+# define CONFIG_SYS_GBL_DATA_ADDR (CONFIG_SYS_MALLOC_BASE - CONFIG_SYS_GBL_DATA_SIZE)
+#endif
+#ifndef CONFIG_STACKBASE
+# define CONFIG_STACKBASE (CONFIG_SYS_GBL_DATA_ADDR - 4)
+#endif
+#ifndef CONFIG_SYS_MEMTEST_START
+# define CONFIG_SYS_MEMTEST_START 0
+#endif
+#ifndef CONFIG_SYS_MEMTEST_END
+# define CONFIG_SYS_MEMTEST_END (CONFIG_STACKBASE - 8192 + 4)
+#endif
+
+/* Check to make sure everything fits in external RAM */
+#if ((CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) > CONFIG_SYS_MAX_RAM_SIZE)
+# error Memory Map does not fit into configuration
+#endif
+
+/* Default/common Blackfin environment settings */
+#ifndef CONFIG_LOADADDR
+# define CONFIG_LOADADDR 0x1000000
+#endif
+#ifndef CONFIG_SYS_LOAD_ADDR
+# define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
+#endif
+#ifndef CONFIG_SYS_BOOTM_LEN
+# define CONFIG_SYS_BOOTM_LEN 0x4000000
+#endif
+#ifndef CONFIG_SYS_PROMPT
+# define CONFIG_SYS_PROMPT "bfin> "
+#endif
+#ifndef CONFIG_SYS_CBSIZE
+# ifdef CONFIG_CMD_KGDB
+# define CONFIG_SYS_CBSIZE 1024
+# else
+# define CONFIG_SYS_CBSIZE 256
+# endif
+#endif
+#ifndef CONFIG_SYS_BARGSIZE
+# define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
+#endif
+#ifndef CONFIG_SYS_PBSIZE
+# define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+#endif
+#ifndef CONFIG_SYS_MAXARGS
+# define CONFIG_SYS_MAXARGS 16
+#endif
+#ifndef CONFIG_SYS_HZ
+# define CONFIG_SYS_HZ 1000
+#endif
+#ifndef CONFIG_SYS_BAUDRATE_TABLE
+# define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
#endif
#endif
diff --git a/include/asm-blackfin/blackfin_local.h b/include/asm-blackfin/blackfin_local.h
index 6f0e662a95..c9ee91a439 100644
--- a/include/asm-blackfin/blackfin_local.h
+++ b/include/asm-blackfin/blackfin_local.h
@@ -58,7 +58,7 @@ extern u_long get_sclk(void);
extern void blackfin_icache_flush_range(const void *, const void *);
extern void blackfin_dcache_flush_range(const void *, const void *);
-extern void blackfin_dcache_invalidate_range(const void *, const void *);
+extern void blackfin_dcache_flush_invalidate_range(const void *, const void *);
/* Use DMA to move data from on chip to external memory. While this is
* required for only L1 instruction (it is not directly readable by the
diff --git a/include/asm-blackfin/mach-common/bits/bootrom.h b/include/asm-blackfin/mach-common/bits/bootrom.h
index 6cdaa4f894..fb97ff81b3 100644
--- a/include/asm-blackfin/mach-common/bits/bootrom.h
+++ b/include/asm-blackfin/mach-common/bits/bootrom.h
@@ -88,27 +88,42 @@
#define _BOOTROM_REV 0xEF000040
#define _BOOTROM_SESR 0xEF001000
+#define BOOTROM_FOLLOWS_C_ABI 1
+
#define BOOTROM_CAPS_ADI_BOOT_STRUCTS 1
-/* Not available on initial BF54x or BF52x */
-#if (defined(__ADSPBF54x__) && __SILICON_REVISION__ < 1) || \
- (defined(__ADSPBF52x__) && __SILICON_REVISION__ < 2)
-#define BOOTROM_CAPS_SYSCONTROL 0
-#else
-#define BOOTROM_CAPS_SYSCONTROL 1
#endif
+#ifndef BOOTROM_FOLLOWS_C_ABI
+#define BOOTROM_FOLLOWS_C_ABI 0
#endif
-
#ifndef BOOTROM_CAPS_ADI_BOOT_STRUCTS
#define BOOTROM_CAPS_ADI_BOOT_STRUCTS 0
#endif
-#ifndef BOOTROM_CAPS_SYSCONTROL
-#define BOOTROM_CAPS_SYSCONTROL 0
-#endif
+
+/* Possible syscontrol action flags */
+#define SYSCTRL_READ 0x00000000 /* read registers */
+#define SYSCTRL_WRITE 0x00000001 /* write registers */
+#define SYSCTRL_SYSRESET 0x00000002 /* perform system reset */
+#define SYSCTRL_CORERESET 0x00000004 /* perform core reset */
+#define SYSCTRL_SOFTRESET 0x00000006 /* perform core and system reset */
+#define SYSCTRL_VRCTL 0x00000010 /* read/write VR_CTL register */
+#define SYSCTRL_EXTVOLTAGE 0x00000020 /* VDDINT supplied externally */
+#define SYSCTRL_INTVOLTAGE 0x00000000 /* VDDINT generated by on-chip regulator */
+#define SYSCTRL_OTPVOLTAGE 0x00000040 /* For Factory Purposes Only */
+#define SYSCTRL_PLLCTL 0x00000100 /* read/write PLL_CTL register */
+#define SYSCTRL_PLLDIV 0x00000200 /* read/write PLL_DIV register */
+#define SYSCTRL_LOCKCNT 0x00000400 /* read/write PLL_LOCKCNT register */
+#define SYSCTRL_PLLSTAT 0x00000800 /* read/write PLL_STAT register */
#ifndef __ASSEMBLY__
+#if BOOTROM_FOLLOWS_C_ABI
+# define BOOTROM_CALLED_FUNC_ATTR
+#else
+# define BOOTROM_CALLED_FUNC_ATTR __attribute__((saveall))
+#endif
+
/* Structures for the syscontrol() function */
typedef struct ADI_SYSCTRL_VALUES {
uint16_t uwVrCtl;
@@ -121,25 +136,26 @@ typedef struct ADI_SYSCTRL_VALUES {
#ifndef _BOOTROM_SYSCONTROL
#define _BOOTROM_SYSCONTROL 0
#endif
-static uint32_t (* const syscontrol)(uint32_t action_flags, ADI_SYSCTRL_VALUES *power_settings, void *reserved) = (void *)_BOOTROM_SYSCONTROL;
-
-#endif /* __ASSEMBLY__ */
-
-/* Possible syscontrol action flags */
-#define SYSCTRL_READ 0x00000000 /* read registers */
-#define SYSCTRL_WRITE 0x00000001 /* write registers */
-#define SYSCTRL_SYSRESET 0x00000002 /* perform system reset */
-#define SYSCTRL_SOFTRESET 0x00000004 /* perform core and system reset */
-#define SYSCTRL_VRCTL 0x00000010 /* read/write VR_CTL register */
-#define SYSCTRL_EXTVOLTAGE 0x00000020 /* VDDINT supplied externally */
-#define SYSCTRL_INTVOLTAGE 0x00000000 /* VDDINT generated by on-chip regulator */
-#define SYSCTRL_OTPVOLTAGE 0x00000040 /* For Factory Purposes Only */
-#define SYSCTRL_PLLCTL 0x00000100 /* read/write PLL_CTL register */
-#define SYSCTRL_PLLDIV 0x00000200 /* read/write PLL_DIV register */
-#define SYSCTRL_LOCKCNT 0x00000400 /* read/write PLL_LOCKCNT register */
-#define SYSCTRL_PLLSTAT 0x00000800 /* read/write PLL_STAT register */
+static uint32_t (* const bfrom_SysControl)(uint32_t action_flags, ADI_SYSCTRL_VALUES *power_settings, void *reserved) = (void *)_BOOTROM_SYSCONTROL;
-#ifndef __ASSEMBLY__
+/* We need a dedicated function since we need to screw with the stack pointer
+ * when resetting. The on-chip ROM will save/restore registers on the stack
+ * when doing a system reset, so the stack cannot be outside of the chip.
+ */
+__attribute__((__noreturn__))
+static inline void bfrom_SoftReset(void *new_stack)
+{
+ while (1)
+ __asm__ __volatile__(
+ "sp = %[stack];"
+ "jump (%[bfrom_syscontrol]);"
+ : : [bfrom_syscontrol] "p"(bfrom_SysControl),
+ "q0"(SYSCTRL_SOFTRESET),
+ "q1"(0),
+ "q2"(NULL),
+ [stack] "p"(new_stack)
+ );
+}
/* Structures for working with LDRs and boot rom callbacks */
typedef struct ADI_BOOT_HEADER {
diff --git a/include/asm-blackfin/mach-common/bits/ebiu.h b/include/asm-blackfin/mach-common/bits/ebiu.h
index ab530ad869..af456fbe98 100644
--- a/include/asm-blackfin/mach-common/bits/ebiu.h
+++ b/include/asm-blackfin/mach-common/bits/ebiu.h
@@ -410,12 +410,31 @@
/* EBIU_SDSTAT Masks */
#define SDCI 0x0001 /* SDRAM controller is idle */
-#define SDSRA 0x0002 /* SDRAM SDRAM self refresh is active */
+#define SDSRA 0x0002 /* SDRAM self refresh is active */
#define SDPUA 0x0004 /* SDRAM power up active */
#define SDRS 0x0008 /* SDRAM is in reset state */
#define SDEASE 0x0010 /* SDRAM EAB sticky error status - W1C */
#define BGSTAT 0x0020 /* Bus granted */
+/* Only available on DDR based-parts */
+#else
+
+/* EBIU_ERRMST Masks */
+#define DEB0_ERROR 0x0001 /* DEB0 access on reserved memory */
+#define DEB1_ERROR 0x0002 /* DEB1 access on reserved memory */
+#define DEB2_ERROR 0x0004 /* DEB2 (USB) access on reserved memory */
+#define CORE_ERROR 0x0008 /* Core access on reserved memory */
+#define DEB0_MERROR 0x0010 /* DEB0 access on reserved memory and DEB0_ERROR is set */
+#define DEB1_MERROR 0x0020 /* DEB1 access on reserved memory and DEB1_ERROR is set */
+#define DEB2_MERROR 0x0040 /* DEB2 access on reserved memory and DEB2_ERROR is set */
+#define CORE_MERROR 0x0080 /* Core access on reserved memory and CORE_ERROR is set */
+
+/* EBIU_RSTCTL Masks */
+#define DDR_SRESET 0x0001 /* Reset Control to DDR Controller */
+#define SRREQ 0x0008 /* Self Refresh Request */
+#define SRACK 0x0010 /* Self Refresh Request Acknowledgement */
+#define MDDRENABLE 0x0020 /* Mobile DDR Enable */
+
#endif /* EBIU_SDGCTL */
#endif
diff --git a/include/asm-blackfin/mach-common/bits/otp.h b/include/asm-blackfin/mach-common/bits/otp.h
index d529a0a982..4e3f1afcfa 100644
--- a/include/asm-blackfin/mach-common/bits/otp.h
+++ b/include/asm-blackfin/mach-common/bits/otp.h
@@ -9,23 +9,22 @@
#include "bootrom.h"
-static uint32_t (* const otp_command)(uint32_t command, uint32_t value) = (void *)_BOOTROM_OTP_COMMAND;
-static uint32_t (* const otp_read)(uint32_t page, uint32_t flags, uint64_t *page_content) = (void *)_BOOTROM_OTP_READ;
-static uint32_t (* const otp_write)(uint32_t page, uint32_t flags, uint64_t *page_content) = (void *)_BOOTROM_OTP_WRITE;
+static uint32_t (* const bfrom_OtpCommand)(uint32_t command, uint32_t value) = (void *)_BOOTROM_OTP_COMMAND;
+static uint32_t (* const bfrom_OtpRead)(uint32_t page, uint32_t flags, uint64_t *page_content) = (void *)_BOOTROM_OTP_READ;
+static uint32_t (* const bfrom_OtpWrite)(uint32_t page, uint32_t flags, uint64_t *page_content) = (void *)_BOOTROM_OTP_WRITE;
#endif
/* otp_command(): defines for "command" */
-#define OTP_INIT 0x00000001
-#define OTP_CLOSE 0x00000002
+#define OTP_INIT 0x00000001
+#define OTP_CLOSE 0x00000002
/* otp_{read,write}(): defines for "flags" */
-#define OTP_LOWER_HALF 0x00000000 /* select upper/lower 64-bit half (bit 0) */
-#define OTP_UPPER_HALF 0x00000001
-#define OTP_NO_ECC 0x00000010 /* do not use ECC */
-#define OTP_LOCK 0x00000020 /* sets page protection bit for page */
-#define OTP_ACCESS_READ 0x00001000
-#define OTP_ACCESS_READWRITE 0x00002000
+#define OTP_LOWER_HALF 0x00000000 /* select upper/lower 64-bit half (bit 0) */
+#define OTP_UPPER_HALF 0x00000001
+#define OTP_NO_ECC 0x00000010 /* do not use ECC */
+#define OTP_LOCK 0x00000020 /* sets page protection bit for page */
+#define OTP_CHECK_FOR_PREV_WRITE 0x00000080
/* Return values for all functions */
#define OTP_SUCCESS 0x00000000
diff --git a/include/configs/bf533-ezkit.h b/include/configs/bf533-ezkit.h
index e871737177..48c0252e46 100644
--- a/include/configs/bf533-ezkit.h
+++ b/include/configs/bf533-ezkit.h
@@ -198,7 +198,7 @@
#define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */
#define CONFIG_SYS_I2C_SPEED 50000
-#define CONFIG_SYS_I2C_SLAVE 0xFE
+#define CONFIG_SYS_I2C_SLAVE 0
#define CONFIG_SYS_BOOTM_LEN 0x4000000 /* Large Image Length, set to 64 Meg */
diff --git a/include/configs/bf533-stamp.h b/include/configs/bf533-stamp.h
index 5ad99a2fd4..ee41c7e78f 100644
--- a/include/configs/bf533-stamp.h
+++ b/include/configs/bf533-stamp.h
@@ -300,7 +300,7 @@
#define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */
#define CONFIG_SYS_I2C_SPEED 50000
-#define CONFIG_SYS_I2C_SLAVE 0xFE
+#define CONFIG_SYS_I2C_SLAVE 0
#endif /* CONFIG_SOFT_I2C */
/*
diff --git a/include/configs/bf537-stamp.h b/include/configs/bf537-stamp.h
index ac5aaa59ae..27567faab2 100644
--- a/include/configs/bf537-stamp.h
+++ b/include/configs/bf537-stamp.h
@@ -305,13 +305,11 @@
/*
* I2C settings
- * By default PF1 is used as SDA and PF0 as SCL on the Stamp board
*/
-/* #define CONFIG_SOFT_I2C 1*/ /* I2C bit-banged */
-#define CONFIG_HARD_I2C 1 /* I2C TWI */
-#if defined CONFIG_HARD_I2C
-#define CONFIG_TWICLK_KHZ 50
-#endif
+#define CONFIG_HARD_I2C 1
+#define CONFIG_BFIN_TWI_I2C 1
+#define CFG_I2C_SPEED 50000
+#define CFG_I2C_SLAVE 0
#define CONFIG_EBIU_SDRRC_VAL 0x306
#define CONFIG_EBIU_SDGCTL_VAL 0x91114d
@@ -321,39 +319,6 @@
#define CONFIG_EBIU_AMBCTL0_VAL 0x7BB07BB0
#define CONFIG_EBIU_AMBCTL1_VAL 0xFFC27BB0
-#if defined CONFIG_SOFT_I2C
-/*
- * Software (bit-bang) I2C driver configuration
- */
-#define PF_SCL PF0
-#define PF_SDA PF1
-
-#define I2C_INIT (*pFIO_DIR |= PF_SCL); asm("ssync;")
-#define I2C_ACTIVE (*pFIO_DIR |= PF_SDA); *pFIO_INEN &= ~PF_SDA; asm("ssync;")
-#define I2C_TRISTATE (*pFIO_DIR &= ~PF_SDA); *pFIO_INEN |= PF_SDA; asm("ssync;")
-#define I2C_READ ((volatile)(*pFIO_FLAG_D & PF_SDA) != 0); asm("ssync;")
-#define I2C_SDA(bit) if(bit) { \
- *pFIO_FLAG_S = PF_SDA; \
- asm("ssync;"); \
- } \
- else { \
- *pFIO_FLAG_C = PF_SDA; \
- asm("ssync;"); \
- }
-#define I2C_SCL(bit) if(bit) { \
- *pFIO_FLAG_S = PF_SCL; \
- asm("ssync;"); \
- } \
- else { \
- *pFIO_FLAG_C = PF_SCL; \
- asm("ssync;"); \
- }
-#define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */
-#endif
-
-#define CONFIG_SYS_I2C_SPEED 50000
-#define CONFIG_SYS_I2C_SLAVE 0xFE
-
/* 0xFF, 0x7BB07BB0, 0x22547BB0 */
/* #define AMGCTLVAL (AMBEN_P0 | AMBEN_P1 | AMBEN_P2 | AMCKEN)
#define AMBCTL0VAL (B1WAT_7 | B1RAT_11 | B1HT_2 | B1ST_3 | B1TT_4 | ~B1RDYPOL | \
diff --git a/include/devices.h b/include/devices.h
index 20ddfc4342..84c4514880 100644
--- a/include/devices.h
+++ b/include/devices.h
@@ -116,5 +116,8 @@ int drv_usbtty_init (void);
#ifdef CONFIG_NETCONSOLE
int drv_nc_init (void);
#endif
+#ifdef CONFIG_JTAG_CONSOLE
+int drv_jtag_console_init (void);
+#endif
#endif /* _DEVICES_H_ */
diff --git a/include/status_led.h b/include/status_led.h
index 79be698850..175972a052 100644
--- a/include/status_led.h
+++ b/include/status_led.h
@@ -346,6 +346,9 @@ void status_led_set (int led, int state);
#elif defined(CONFIG_NIOS2)
/* XXX empty just to avoid the error */
/************************************************************************/
+#elif defined(CONFIG_BLACKFIN)
+/* XXX empty just to avoid the error */
+/************************************************************************/
#elif defined(CONFIG_V38B)
# define STATUS_LED_BIT 0x0010 /* Timer7 GPIO */
generated by cgit (git 2.34.1) at 2024-12-30 20:21:16 +0000