summaryrefslogtreecommitdiff
path: root/include
diff options
context:
space:
mode:
Diffstat (limited to 'include')
-rw-r--r--include/common.h7
-rw-r--r--include/configs/MPC8313ERDB.h6
-rw-r--r--include/configs/MPC832XEMDS.h5
-rw-r--r--include/configs/MPC8349EMDS.h2
-rw-r--r--include/configs/MPC8349ITX.h2
-rw-r--r--include/configs/MPC8360EMDS.h7
-rw-r--r--include/configs/TQM85xx.h1
-rw-r--r--include/configs/hcu5.h1
-rw-r--r--include/configs/katmai.h1
-rw-r--r--include/configs/luan.h1
-rw-r--r--include/configs/lwmon5.h1
-rw-r--r--include/configs/p3mx.h1
-rw-r--r--include/configs/sequoia.h7
-rw-r--r--include/configs/yucca.h1
-rw-r--r--include/mpc83xx.h5
15 files changed, 30 insertions, 18 deletions
diff --git a/include/common.h b/include/common.h
index 27a660a4d6..9a5a0ab798 100644
--- a/include/common.h
+++ b/include/common.h
@@ -434,6 +434,13 @@ int checkdcache (void);
void upmconfig (unsigned int, unsigned int *, unsigned int);
ulong get_tbclk (void);
void reset_cpu (ulong addr);
+#if defined (CONFIG_OF_LIBFDT) && defined (CONFIG_OF_BOARD_SETUP)
+void ft_cpu_setup(void *blob, bd_t *bd);
+#ifdef CONFIG_PCI
+void ft_pci_setup(void *blob, bd_t *bd);
+#endif
+#endif
+
/* $(CPU)/serial.c */
int serial_init (void);
diff --git a/include/configs/MPC8313ERDB.h b/include/configs/MPC8313ERDB.h
index 377503782c..36b0f160b5 100644
--- a/include/configs/MPC8313ERDB.h
+++ b/include/configs/MPC8313ERDB.h
@@ -113,12 +113,12 @@
/* 0x03200064 */
#if defined(CONFIG_DDR_2T_TIMING)
#define CFG_SDRAM_CFG ( SDRAM_CFG_SREN \
- | 3 << SDRAM_CFG_SDRAM_TYPE_SHIFT \
+ | SDRAM_CFG_SDRAM_TYPE_DDR2 \
| SDRAM_CFG_2T_EN \
| SDRAM_CFG_DBW_32 )
#else
#define CFG_SDRAM_CFG ( SDRAM_CFG_SREN \
- | 3 << SDRAM_CFG_SDRAM_TYPE_SHIFT \
+ | SDRAM_CFG_SDRAM_TYPE_DDR2 \
| SDRAM_CFG_32_BE )
/* 0x43080000 */
#endif
@@ -228,7 +228,7 @@
#define CFG_LBLAWAR3_PRELIM 0x8000000E /* 32KB */
/* pass open firmware flat tree */
-#define CONFIG_OF_FLAT_TREE 1
+#define CONFIG_OF_LIBFDT 1
#define CONFIG_OF_BOARD_SETUP 1
/* maximum size of the flat tree (8K) */
diff --git a/include/configs/MPC832XEMDS.h b/include/configs/MPC832XEMDS.h
index f62ca2c42b..efc317288e 100644
--- a/include/configs/MPC832XEMDS.h
+++ b/include/configs/MPC832XEMDS.h
@@ -30,6 +30,8 @@
#define CONFIG_MPC83XX 1 /* MPC83xx family */
#define CONFIG_MPC832X 1 /* MPC832x CPU specific */
#define CONFIG_MPC832XEMDS 1 /* MPC832XEMDS board specific */
+#undef CONFIG_PQ_MDS_PIB /* POWERQUICC MDS Platform IO Board */
+#undef CONFIG_PQ_MDS_PIB_ATM /* QOC3 ATM card */
/*
* System Clock Setup
@@ -87,6 +89,7 @@
#define CFG_SICRL 0x00000000
#define CONFIG_BOARD_EARLY_INIT_F /* call board_pre_init */
+#define CONFIG_BOARD_EARLY_INIT_R
/*
* IMMR new address
@@ -315,7 +318,7 @@
#endif
/* pass open firmware flat tree */
-#define CONFIG_OF_FLAT_TREE 1
+#define CONFIG_OF_LIBFDT 1
#define CONFIG_OF_BOARD_SETUP 1
/* maximum size of the flat tree (8K) */
diff --git a/include/configs/MPC8349EMDS.h b/include/configs/MPC8349EMDS.h
index 48616c08b0..c1f1c747c9 100644
--- a/include/configs/MPC8349EMDS.h
+++ b/include/configs/MPC8349EMDS.h
@@ -339,7 +339,7 @@
#endif
/* pass open firmware flat tree */
-#define CONFIG_OF_FLAT_TREE 1
+#define CONFIG_OF_LIBFDT 1
#define CONFIG_OF_BOARD_SETUP 1
/* maximum size of the flat tree (8K) */
diff --git a/include/configs/MPC8349ITX.h b/include/configs/MPC8349ITX.h
index c5d036296c..3311d5c1f3 100644
--- a/include/configs/MPC8349ITX.h
+++ b/include/configs/MPC8349ITX.h
@@ -296,7 +296,7 @@ boards, we say we have two, but don't display a message if we find only one. */
#define CFG_NS16550_COM2 (CFG_IMMR + 0x4600)
/* pass open firmware flat tree */
-#define CONFIG_OF_FLAT_TREE
+#define CONFIG_OF_LIBFDT 1
#define CONFIG_OF_BOARD_SETUP
/* maximum size of the flat tree (8K) */
diff --git a/include/configs/MPC8360EMDS.h b/include/configs/MPC8360EMDS.h
index 4b32a140e8..094b66e7c9 100644
--- a/include/configs/MPC8360EMDS.h
+++ b/include/configs/MPC8360EMDS.h
@@ -32,6 +32,8 @@
#define CONFIG_MPC83XX 1 /* MPC83XX family */
#define CONFIG_MPC8360 1 /* MPC8360 CPU specific */
#define CONFIG_MPC8360EMDS 1 /* MPC8360EMDS board specific */
+#undef CONFIG_PQ_MDS_PIB /* POWERQUICC MDS Platform IO Board */
+#undef CONFIG_PQ_MDS_PIB_ATM /* QOC3 ATM card */
/*
* System Clock Setup
@@ -88,6 +90,7 @@
#define CFG_SICRL 0x40000000
#define CONFIG_BOARD_EARLY_INIT_F /* call board_pre_init */
+#define CONFIG_BOARD_EARLY_INIT_R
/*
* IMMR new address
@@ -309,13 +312,13 @@
/*
* CS4 on Local Bus, to PIB
*/
-#define CFG_BR4_PRELIM 0xf8008801 /* CS4 base address at 0xf8008000 */
+#define CFG_BR4_PRELIM 0xf8010801 /* CS4 base address at 0xf8010000 */
#define CFG_OR4_PRELIM 0xffffe9f7 /* size 32KB, port size 8bit, GPCM */
/*
* CS5 on Local Bus, to PIB
*/
-#define CFG_BR5_PRELIM 0xf8010801 /* CS5 base address at 0xf8010000 */
+#define CFG_BR5_PRELIM 0xf8008801 /* CS5 base address at 0xf8008000 */
#define CFG_OR5_PRELIM 0xffffe9f7 /* size 32KB, port size 8bit, GPCM */
/*
diff --git a/include/configs/TQM85xx.h b/include/configs/TQM85xx.h
index a330c4220d..2f23c50493 100644
--- a/include/configs/TQM85xx.h
+++ b/include/configs/TQM85xx.h
@@ -94,7 +94,6 @@
*/
#define CFG_DDR_SDRAM_BASE 0x00000000 /* DDR is system memory */
#define CFG_SDRAM_BASE CFG_DDR_SDRAM_BASE
-#define CONFIG_ADD_RAM_INFO 1 /* print additional info*/
#if defined(CONFIG_TQM8540) || defined(CONFIG_TQM8560)
/* TQM8540 & 8560 need DLL-override */
diff --git a/include/configs/hcu5.h b/include/configs/hcu5.h
index d0bf2516ed..f95d78ec16 100644
--- a/include/configs/hcu5.h
+++ b/include/configs/hcu5.h
@@ -43,7 +43,6 @@
#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
#define CONFIG_MISC_INIT_R 1 /* Call misc_init_r */
-#define CONFIG_ADD_RAM_INFO 1 /* Print additional info */
/*-----------------------------------------------------------------------
* Base addresses -- Note these are effective addresses where the
diff --git a/include/configs/katmai.h b/include/configs/katmai.h
index 110ad44ee1..b6d0f519a8 100644
--- a/include/configs/katmai.h
+++ b/include/configs/katmai.h
@@ -42,7 +42,6 @@
#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */
#define CONFIG_MISC_INIT_F 1 /* Use misc_init_f() */
-#define CONFIG_ADD_RAM_INFO 1 /* Print additional info */
#undef CONFIG_SHOW_BOOT_PROGRESS
/*-----------------------------------------------------------------------
diff --git a/include/configs/luan.h b/include/configs/luan.h
index 26dbec92e9..a09dd74733 100644
--- a/include/configs/luan.h
+++ b/include/configs/luan.h
@@ -39,7 +39,6 @@
#define CONFIG_BOARD_EARLY_INIT_F 1 /* call board_early_init_f() */
#define CONFIG_MISC_INIT_R 1 /* call misc_init_r() */
-#define CONFIG_ADD_RAM_INFO 1 /* Print additional info */
/*-----------------------------------------------------------------------
* Base addresses -- Note these are effective addresses where the
diff --git a/include/configs/lwmon5.h b/include/configs/lwmon5.h
index 604b7d12f8..7116c49c77 100644
--- a/include/configs/lwmon5.h
+++ b/include/configs/lwmon5.h
@@ -35,7 +35,6 @@
#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
#define CONFIG_MISC_INIT_R 1 /* Call misc_init_r */
-#define CONFIG_ADD_RAM_INFO 1 /* Print additional info */
/*-----------------------------------------------------------------------
* Base addresses -- Note these are effective addresses where the
diff --git a/include/configs/p3mx.h b/include/configs/p3mx.h
index 8ae38cb277..bec442d983 100644
--- a/include/configs/p3mx.h
+++ b/include/configs/p3mx.h
@@ -60,7 +60,6 @@
#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
#define CONFIG_BOARD_EARLY_INIT_R 1 /* Call board_early_init_f */
#define CONFIG_MISC_INIT_R 1 /* Call misc_init_r() */
-#define CONFIG_ADD_RAM_INFO 1 /* Print additional info */
/*-----------------------------------------------------------------------
* Base addresses -- Note these are effective addresses where the
diff --git a/include/configs/sequoia.h b/include/configs/sequoia.h
index 3f75a441a0..824a81240c 100644
--- a/include/configs/sequoia.h
+++ b/include/configs/sequoia.h
@@ -343,6 +343,11 @@
#define CONFIG_CMD_USB
#endif
+#ifndef CONFIG_RAINIER
+#define CFG_POST_FPU_ON CFG_POST_FPU
+#else
+#define CFG_POST_FPU_ON 0
+#endif
/* POST support */
#define CONFIG_POST (CFG_POST_MEMORY | \
@@ -350,7 +355,7 @@
CFG_POST_UART | \
CFG_POST_I2C | \
CFG_POST_CACHE | \
- CFG_POST_FPU | \
+ CFG_POST_FPU_ON | \
CFG_POST_ETHER | \
CFG_POST_SPR)
diff --git a/include/configs/yucca.h b/include/configs/yucca.h
index 9c536fd12d..906f046fa7 100644
--- a/include/configs/yucca.h
+++ b/include/configs/yucca.h
@@ -46,7 +46,6 @@
#define EXTCLK_83 83333333
#define CONFIG_MISC_INIT_F 1 /* Use misc_init_f() */
-#define CONFIG_ADD_RAM_INFO 1 /* Print additional info */
#undef CONFIG_SHOW_BOOT_PROGRESS
#undef CONFIG_STRESS
diff --git a/include/mpc83xx.h b/include/mpc83xx.h
index 829dbf9387..4d32c6a376 100644
--- a/include/mpc83xx.h
+++ b/include/mpc83xx.h
@@ -705,8 +705,9 @@
#define SDRAM_CFG_SREN 0x40000000
#define SDRAM_CFG_ECC_EN 0x20000000
#define SDRAM_CFG_RD_EN 0x10000000
-#define SDRAM_CFG_SDRAM_TYPE 0x03000000
-#define SDRAM_CFG_SDRAM_TYPE_DDR 0x02000000
+#define SDRAM_CFG_SDRAM_TYPE_DDR1 0x02000000
+#define SDRAM_CFG_SDRAM_TYPE_DDR2 0x03000000
+#define SDRAM_CFG_SDRAM_TYPE_MASK 0x07000000
#define SDRAM_CFG_SDRAM_TYPE_SHIFT 24
#define SDRAM_CFG_DYN_PWR 0x00200000
#define SDRAM_CFG_32_BE 0x00080000
generated by cgit (git 2.34.1) at 2024-12-27 21:22:40 +0000