diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/configs/am335x_guardian.h | 11 | ||||
| -rw-r--r-- | include/configs/am65x_evm.h | 11 | ||||
| -rw-r--r-- | include/configs/apalis-tk1.h | 2 | ||||
| -rw-r--r-- | include/configs/j721e_evm.h | 14 | ||||
| -rw-r--r-- | include/configs/microblaze-generic.h | 8 | ||||
| -rw-r--r-- | include/configs/tao3530.h | 2 | ||||
| -rw-r--r-- | include/configs/ti_armv7_common.h | 2 | ||||
| -rw-r--r-- | include/configs/xilinx_versal.h | 50 | ||||
| -rw-r--r-- | include/configs/xilinx_versal_mini.h | 3 | ||||
| -rw-r--r-- | include/configs/xilinx_zynqmp.h | 12 | ||||
| -rw-r--r-- | include/configs/zynq-common.h | 71 | ||||
| -rw-r--r-- | include/dm/device.h | 9 | ||||
| -rw-r--r-- | include/dt-bindings/reset/mt7623-reset.h (renamed from include/dt-bindings/reset/mtk-reset.h) | 4 | ||||
| -rw-r--r-- | include/dt-bindings/reset/mt7629-reset.h | 36 | ||||
| -rw-r--r-- | include/environment/ti/k3_rproc.h | 52 | ||||
| -rw-r--r-- | include/phy.h | 6 | ||||
| -rw-r--r-- | include/remoteproc.h | 76 | ||||
| -rw-r--r-- | include/spl.h | 3 | ||||
| -rw-r--r-- | include/versalpl.h | 20 | ||||
| -rw-r--r-- | include/wait_bit.h | 2 | ||||
| -rw-r--r-- | include/xilinx.h | 2 | ||||
| -rw-r--r-- | include/zynqmp_firmware.h | 37 |
22 files changed, 349 insertions, 84 deletions
diff --git a/include/configs/am335x_guardian.h b/include/configs/am335x_guardian.h index 8bde198313..b45b8d2eec 100644 --- a/include/configs/am335x_guardian.h +++ b/include/configs/am335x_guardian.h @@ -16,10 +16,14 @@ #define CONFIG_TIMESTAMP #endif +#define CONFIG_SYS_BOOTM_LEN (16 << 20) + /* Clock Defines */ #define V_OSCK 24000000 /* Clock output from T2 */ #define V_SCLK (V_OSCK) +#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG + #ifndef CONFIG_SPL_BUILD #define MEM_LAYOUT_ENV_SETTINGS \ @@ -30,7 +34,6 @@ "ramdisk_addr_r=0x88080000\0" \ #define BOOT_TARGET_DEVICES(func) \ - func(MMC, mmc, 0) \ func(UBIFS, ubifs, 0) \ func(PXE, pxe, na) \ func(DHCP, dhcp, na) @@ -44,11 +47,12 @@ MEM_LAYOUT_ENV_SETTINGS \ BOOTENV \ "bootlimit=3\0" \ + "bootubivol=rootfs\0" \ "altbootcmd=" \ "setenv boot_config \"extlinux-rollback.conf\"; " \ "run distro_bootcmd\0" -#endif /* CONFIG_SPL_BUILD */ +#endif /* ! CONFIG_SPL_BUILD */ /* NS16550 Configuration */ #define CONFIG_SYS_NS16550_COM1 0x44e09000 /* UART0 */ @@ -65,9 +69,6 @@ #define CONFIG_SYS_BOOTCOUNT_LE #ifdef CONFIG_NAND -#define CONFIG_ENV_OFFSET 0x300000 -#define CONFIG_ENV_OFFSET_REDUND 0x340000 -#define CONFIG_ENV_SIZE 0x040000 #define CONFIG_SYS_NAND_5_ADDR_CYCLE #define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \ diff --git a/include/configs/am65x_evm.h b/include/configs/am65x_evm.h index 0249a20ba8..1149d55937 100644 --- a/include/configs/am65x_evm.h +++ b/include/configs/am65x_evm.h @@ -12,6 +12,7 @@ #include <linux/sizes.h> #include <config_distro_bootcmd.h> #include <environment/ti/mmc.h> +#include <environment/ti/k3_rproc.h> #define CONFIG_ENV_SIZE (128 << 10) @@ -98,12 +99,20 @@ "${bootdir}/${name_fit}\0" \ "partitions=" PARTS_DEFAULT +#ifdef DEFAULT_RPROCS +#undef DEFAULT_RPROCS +#endif +#define DEFAULT_RPROCS "" \ + "0 /lib/firmware/am65x-mcu-r5f0_0-fw " \ + "1 /lib/firmware/am65x-mcu-r5f0_1-fw " + /* Incorporate settings into the U-Boot environment */ #define CONFIG_EXTRA_ENV_SETTINGS \ DEFAULT_MMC_TI_ARGS \ DEFAULT_FIT_TI_ARGS \ EXTRA_ENV_AM65X_BOARD_SETTINGS \ - EXTRA_ENV_AM65X_BOARD_SETTINGS_MMC + EXTRA_ENV_AM65X_BOARD_SETTINGS_MMC \ + EXTRA_ENV_RPROC_SETTINGS /* MMC ENV related defines */ #ifdef CONFIG_ENV_IS_IN_MMC diff --git a/include/configs/apalis-tk1.h b/include/configs/apalis-tk1.h index dacf36bf79..fe45917b88 100644 --- a/include/configs/apalis-tk1.h +++ b/include/configs/apalis-tk1.h @@ -138,8 +138,6 @@ #define CONFIG_CMD_TIME -#define CONFIG_SYS_BOOT_RAMDISK_HIGH - #include "tegra-common-usb-gadget.h" #include "tegra-common-post.h" diff --git a/include/configs/j721e_evm.h b/include/configs/j721e_evm.h index 5fe77ef16d..dbe226b46d 100644 --- a/include/configs/j721e_evm.h +++ b/include/configs/j721e_evm.h @@ -12,6 +12,7 @@ #include <linux/sizes.h> #include <config_distro_bootcmd.h> #include <environment/ti/mmc.h> +#include <environment/ti/k3_rproc.h> #define CONFIG_ENV_SIZE (128 << 10) @@ -87,11 +88,22 @@ "get_kern_mmc=load mmc ${bootpart} ${loadaddr} " \ "${bootdir}/${name_kern}\0" +#ifdef DEFAULT_RPROCS +#undef DEFAULT_RPROCS +#endif +#define DEFAULT_RPROCS "" \ + "3 /lib/firmware/j7-main-r5f0_1-fw " \ + "4 /lib/firmware/j7-main-r5f1_0-fw " \ + "6 /lib/firmware/j7-c66_0-fw " \ + "7 /lib/firmware/j7-c66_1-fw " \ + "8 /lib/firmware/j7-c71_0-fw " + /* Incorporate settings into the U-Boot environment */ #define CONFIG_EXTRA_ENV_SETTINGS \ DEFAULT_MMC_TI_ARGS \ EXTRA_ENV_J721E_BOARD_SETTINGS \ - EXTRA_ENV_J721E_BOARD_SETTINGS_MMC + EXTRA_ENV_J721E_BOARD_SETTINGS_MMC \ + EXTRA_ENV_RPROC_SETTINGS /* Now for the remaining common defines */ #include <configs/ti_armv7_common.h> diff --git a/include/configs/microblaze-generic.h b/include/configs/microblaze-generic.h index 814fec5b33..f1d0def3c1 100644 --- a/include/configs/microblaze-generic.h +++ b/include/configs/microblaze-generic.h @@ -13,6 +13,8 @@ /* MicroBlaze CPU */ #define MICROBLAZE_V5 1 +#define CONFIG_SYS_BOOTM_LEN (64 * 1024 * 1024) + /* linear and spi flash memory */ #ifdef XILINX_FLASH_START #define FLASH @@ -100,6 +102,9 @@ #endif /* !SPIFLASH */ #endif /* !FLASH */ +#define XILINX_USE_ICACHE 1 +#define XILINX_USE_DCACHE 1 + #if defined(XILINX_USE_ICACHE) # define CONFIG_ICACHE #else @@ -152,9 +157,6 @@ "setenv stdin serial\0" #endif -/* Enable flat device tree support */ -#define CONFIG_LMB 1 - #if defined(CONFIG_XILINX_AXIEMAC) # define CONFIG_SYS_FAULT_ECHO_LINK_DOWN 1 #endif diff --git a/include/configs/tao3530.h b/include/configs/tao3530.h index c34e785d9e..7a54fe3e1e 100644 --- a/include/configs/tao3530.h +++ b/include/configs/tao3530.h @@ -114,7 +114,7 @@ "bootm ${loadaddr}\0" \ #define CONFIG_BOOTCOMMAND \ - "if mmc rescan ${mmcdev}; then " \ + "mmc dev ${mmcdev}; if mmc rescan; then " \ "if run loadbootscript; then " \ "run bootscript; " \ "else " \ diff --git a/include/configs/ti_armv7_common.h b/include/configs/ti_armv7_common.h index 2de6bc2390..6d15304a65 100644 --- a/include/configs/ti_armv7_common.h +++ b/include/configs/ti_armv7_common.h @@ -60,7 +60,7 @@ "do;" \ "setenv overlaystring ${overlaystring}'#'${overlay};" \ "done;\0" \ - "run_fit=bootm ${loadaddr}#${fdtfile}${overlaystring}\0" \ + "run_fit=bootm ${addr_fit}#${fdtfile}${overlaystring}\0" \ "loadfit=run args_mmc; run run_fit;\0" \ /* diff --git a/include/configs/xilinx_versal.h b/include/configs/xilinx_versal.h index 296f4502c6..f426127edc 100644 --- a/include/configs/xilinx_versal.h +++ b/include/configs/xilinx_versal.h @@ -52,6 +52,26 @@ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE #define CONFIG_SYS_MAXARGS 64 +#if defined(CONFIG_CMD_DFU) +#define CONFIG_SYS_DFU_DATA_BUF_SIZE 0x1800000 +#define DFU_DEFAULT_POLL_TIMEOUT 300 +#define CONFIG_THOR_RESET_OFF +#define DFU_ALT_INFO_RAM \ + "dfu_ram_info=" \ + "setenv dfu_alt_info " \ + "Image ram $kernel_addr_r $kernel_size_r\\\\;" \ + "system.dtb ram $fdt_addr_r $fdt_size_r\0" \ + "dfu_ram=run dfu_ram_info && dfu 0 ram 0\0" \ + "thor_ram=run dfu_ram_info && thordown 0 ram 0\0" + +#define DFU_ALT_INFO \ + DFU_ALT_INFO_RAM +#endif + +#if !defined(DFU_ALT_INFO) +# define DFU_ALT_INFO +#endif + /* Ethernet driver */ #if defined(CONFIG_ZYNQ_GEM) # define CONFIG_NET_MULTI @@ -65,13 +85,14 @@ #define ENV_MEM_LAYOUT_SETTINGS \ "fdt_high=10000000\0" \ - "initrd_high=10000000\0" \ "fdt_addr_r=0x40000000\0" \ + "fdt_size_r=0x400000\0" \ "pxefile_addr_r=0x10000000\0" \ "kernel_addr_r=0x18000000\0" \ - "scriptaddr=0x02000000\0" \ + "kernel_size_r=0x10000000\0" \ + "scriptaddr=0x20000000\0" \ "ramdisk_addr_r=0x02100000\0" \ - "script_offset_f=0x3f80000\0" \ + "script_offset_f=0x7F80000\0" \ "script_size_f=0x80000\0" #if defined(CONFIG_MMC_SDHCI_ZYNQ) @@ -94,9 +115,29 @@ #define BOOTENV_DEV_NAME_XSPI(devtypeu, devtypel, instance) \ "xspi " +#define BOOT_TARGET_DEVICES_JTAG(func) func(JTAG, jtag, na) + +#define BOOTENV_DEV_JTAG(devtypeu, devtypel, instance) \ + "bootcmd_jtag=source $scriptaddr; echo SCRIPT FAILED: continuing...;\0" + +#define BOOTENV_DEV_NAME_JTAG(devtypeu, devtypel, instance) \ + "jtag " + +#define BOOT_TARGET_DEVICES_DFU_USB(func) func(DFU_USB, dfu_usb, 0) + +#define BOOTENV_DEV_DFU_USB(devtypeu, devtypel, instance) \ + "bootcmd_dfu_usb=setenv dfu_alt_info boot.scr ram $scriptaddr " \ + "$script_size_f; dfu 0 ram 0 && source $scriptaddr; " \ + "echo SCRIPT FAILED: continuing...;\0" + +#define BOOTENV_DEV_NAME_DFU_USB(devtypeu, devtypel, instance) \ + "dfu_usb " + #define BOOT_TARGET_DEVICES(func) \ + BOOT_TARGET_DEVICES_JTAG(func) \ BOOT_TARGET_DEVICES_MMC(func) \ BOOT_TARGET_DEVICES_XSPI(func) \ + BOOT_TARGET_DEVICES_DFU_USB(func) \ func(PXE, pxe, na) \ func(DHCP, dhcp, na) @@ -106,7 +147,8 @@ #ifndef CONFIG_EXTRA_ENV_SETTINGS #define CONFIG_EXTRA_ENV_SETTINGS \ ENV_MEM_LAYOUT_SETTINGS \ - BOOTENV + BOOTENV \ + DFU_ALT_INFO #endif #endif /* __XILINX_VERSAL_H */ diff --git a/include/configs/xilinx_versal_mini.h b/include/configs/xilinx_versal_mini.h index d30a697a57..ee305e0226 100644 --- a/include/configs/xilinx_versal_mini.h +++ b/include/configs/xilinx_versal_mini.h @@ -26,4 +26,7 @@ #undef CONFIG_BOOTP_BOOTFILESIZE #undef CONFIG_BOOTP_MAY_FAIL +#undef CONFIG_SYS_CBSIZE +#define CONFIG_SYS_CBSIZE 1024 + #endif /* __CONFIG_VERSAL_MINI_H */ diff --git a/include/configs/xilinx_zynqmp.h b/include/configs/xilinx_zynqmp.h index a1c55a8306..ee1ceebf12 100644 --- a/include/configs/xilinx_zynqmp.h +++ b/include/configs/xilinx_zynqmp.h @@ -109,11 +109,10 @@ #define ENV_MEM_LAYOUT_SETTINGS \ "fdt_high=10000000\0" \ - "initrd_high=10000000\0" \ "fdt_addr_r=0x40000000\0" \ "pxefile_addr_r=0x10000000\0" \ "kernel_addr_r=0x18000000\0" \ - "scriptaddr=0x02000000\0" \ + "scriptaddr=0x20000000\0" \ "ramdisk_addr_r=0x02100000\0" \ "script_offset_f=0x3e80000\0" \ "script_size_f=0x80000\0" \ @@ -176,7 +175,16 @@ #define BOOTENV_DEV_NAME_NAND(devtypeu, devtypel, instance) \ #devtypel #instance " " +#define BOOT_TARGET_DEVICES_JTAG(func) func(JTAG, jtag, na) + +#define BOOTENV_DEV_JTAG(devtypeu, devtypel, instance) \ + "bootcmd_jtag=source $scriptaddr; echo SCRIPT FAILED: continuing...;\0" + +#define BOOTENV_DEV_NAME_JTAG(devtypeu, devtypel, instance) \ + "jtag " + #define BOOT_TARGET_DEVICES(func) \ + BOOT_TARGET_DEVICES_JTAG(func) \ BOOT_TARGET_DEVICES_MMC(func) \ BOOT_TARGET_DEVICES_QSPI(func) \ BOOT_TARGET_DEVICES_NAND(func) \ diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h index ae08ebf2af..b6c9f2c8dd 100644 --- a/include/configs/zynq-common.h +++ b/include/configs/zynq-common.h @@ -111,13 +111,13 @@ #else #ifdef CONFIG_CMD_MMC -#define BOOT_TARGET_DEVICES_MMC(func) func(MMC, mmc, 0) +#define BOOT_TARGET_DEVICES_MMC(func) func(MMC, mmc, 0) func(MMC, mmc, 1) #else #define BOOT_TARGET_DEVICES_MMC(func) #endif #ifdef CONFIG_CMD_USB -#define BOOT_TARGET_DEVICES_USB(func) func(USB, usb, 0) +#define BOOT_TARGET_DEVICES_USB(func) func(USB, usb, 0) func(USB, usb, 1) #else #define BOOT_TARGET_DEVICES_USB(func) #endif @@ -152,15 +152,9 @@ # define BOOT_TARGET_DEVICES_NOR(func) #endif -#define BOOTENV_DEV_XILINX(devtypeu, devtypel, instance) \ - "bootcmd_xilinx=run $modeboot\0" - -#define BOOTENV_DEV_NAME_XILINX(devtypeu, devtypel, instance) \ - "xilinx " - #define BOOTENV_DEV_QSPI(devtypeu, devtypel, instance) \ "bootcmd_qspi=sf probe 0 0 0 && " \ - "sf read $scriptaddr $script_offset_f $script_size_f && " \ + "sf read ${scriptaddr} ${script_offset_f} ${script_size_f} && " \ "source ${scriptaddr}; echo SCRIPT FAILED: continuing...;\0" #define BOOTENV_DEV_NAME_QSPI(devtypeu, devtypel, instance) \ @@ -168,14 +162,15 @@ #define BOOTENV_DEV_NAND(devtypeu, devtypel, instance) \ "bootcmd_nand=nand info && " \ - "nand read $scriptaddr $script_offset_f $script_size_f && " \ + "nand read ${scriptaddr} ${script_offset_f} ${script_size_f} && " \ "source ${scriptaddr}; echo SCRIPT FAILED: continuing...;\0" #define BOOTENV_DEV_NAME_NAND(devtypeu, devtypel, instance) \ "nand " #define BOOTENV_DEV_NOR(devtypeu, devtypel, instance) \ - "bootcmd_nor=cp.b $scropt_offset_nor $scriptaddr $script_size_f && " \ + "script_offset_nor=0xE2FC0000\0" \ + "bootcmd_nor=cp.b ${script_offset_nor} ${scriptaddr} ${script_size_f} && " \ "source ${scriptaddr}; echo SCRIPT FAILED: continuing...;\0" #define BOOTENV_DEV_NAME_NOR(devtypeu, devtypel, instance) \ @@ -188,8 +183,7 @@ BOOT_TARGET_DEVICES_NOR(func) \ BOOT_TARGET_DEVICES_USB(func) \ BOOT_TARGET_DEVICES_PXE(func) \ - BOOT_TARGET_DEVICES_DHCP(func) \ - func(XILINX, xilinx, na) + BOOT_TARGET_DEVICES_DHCP(func) #include <config_distro_bootcmd.h> #endif /* CONFIG_SPL_BUILD */ @@ -197,72 +191,31 @@ /* Default environment */ #ifndef CONFIG_EXTRA_ENV_SETTINGS #define CONFIG_EXTRA_ENV_SETTINGS \ - "fit_image=fit.itb\0" \ - "load_addr=0x2000000\0" \ - "fit_size=0x800000\0" \ - "flash_off=0x100000\0" \ - "nor_flash_off=0xE2100000\0" \ "fdt_high=0x20000000\0" \ "initrd_high=0x20000000\0" \ "scriptaddr=0x20000\0" \ - "script_offser_nor=0xE2FC0000\0" \ "script_offset_f=0xFC0000\0" \ "script_size_f=0x40000\0" \ - "loadbootenv_addr=0x2000000\0" \ "fdt_addr_r=0x1f00000\0" \ "pxefile_addr_r=0x2000000\0" \ "kernel_addr_r=0x2000000\0" \ "scriptaddr=0x3000000\0" \ "ramdisk_addr_r=0x3100000\0" \ - "bootenv=uEnv.txt\0" \ - "bootenv_dev=mmc\0" \ - "loadbootenv=load ${bootenv_dev} 0 ${loadbootenv_addr} ${bootenv}\0" \ - "importbootenv=echo Importing environment from ${bootenv_dev} ...; " \ - "env import -t ${loadbootenv_addr} $filesize\0" \ - "bootenv_existence_test=test -e ${bootenv_dev} 0 /${bootenv}\0" \ - "setbootenv=if env run bootenv_existence_test; then " \ - "if env run loadbootenv; then " \ - "env run importbootenv; " \ - "fi; " \ - "fi; \0" \ - "sd_loadbootenv=setenv bootenv_dev mmc && " \ - "run setbootenv \0" \ - "usb_loadbootenv=setenv bootenv_dev usb && usb start && run setbootenv \0" \ - "preboot=if test $modeboot = sdboot; then " \ - "run sd_loadbootenv; " \ - "echo Checking if uenvcmd is set ...; " \ - "if test -n $uenvcmd; then " \ - "echo Running uenvcmd ...; " \ - "run uenvcmd; " \ - "fi; " \ - "fi; \0" \ - "norboot=echo Copying FIT from NOR flash to RAM... && " \ - "cp.b ${nor_flash_off} ${load_addr} ${fit_size} && " \ - "bootm ${load_addr}\0" \ - "sdboot=echo Copying FIT from SD to RAM... && " \ - "load mmc 0 ${load_addr} ${fit_image} && " \ - "bootm ${load_addr}\0" \ - "jtagboot=echo TFTPing FIT to RAM... && " \ - "tftpboot ${load_addr} ${fit_image} && " \ - "bootm ${load_addr}\0" \ - "usbboot=if usb start; then " \ - "echo Copying FIT from USB to RAM... && " \ - "load usb 0 ${load_addr} ${fit_image} && " \ - "bootm ${load_addr}; fi\0" \ - DFU_ALT_INFO \ - BOOTENV + DFU_ALT_INFO \ + BOOTENV #endif /* Miscellaneous configurable options */ #define CONFIG_CLOCKS #define CONFIG_SYS_MAXARGS 32 /* max number of command args */ +#define CONFIG_SYS_CBSIZE 2048 /* Console I/O Buffer Size */ #define CONFIG_SYS_MEMTEST_START 0 #define CONFIG_SYS_MEMTEST_END 0x1000 #define CONFIG_SYS_INIT_RAM_ADDR 0xFFFF0000 -#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 +#define CONFIG_SYS_INIT_RAM_SIZE 0x2000 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ CONFIG_SYS_INIT_RAM_SIZE - \ GENERATED_GBL_DATA_SIZE) @@ -274,6 +227,8 @@ /* Boot FreeBSD/vxWorks from an ELF image */ #define CONFIG_SYS_MMC_MAX_DEVICE 1 +#undef CONFIG_BOOTM_NETBSD + /* MMC support */ #ifdef CONFIG_MMC_SDHCI_ZYNQ #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 diff --git a/include/dm/device.h b/include/dm/device.h index d1210429e9..defda0aebc 100644 --- a/include/dm/device.h +++ b/include/dm/device.h @@ -405,6 +405,15 @@ const char *dev_get_uclass_name(const struct udevice *dev); int device_get_child(struct udevice *parent, int index, struct udevice **devp); /** + * device_get_child_count() - Get the available child count of a device + * + * Returns the number of children to a device. + * + * @parent: Parent device to check + */ +int device_get_child_count(struct udevice *parent); + +/** * device_find_child_by_seq() - Find a child device based on a sequence * * This searches for a device with the given seq or req_seq. diff --git a/include/dt-bindings/reset/mtk-reset.h b/include/dt-bindings/reset/mt7623-reset.h index 78fcdab009..a859a5b26a 100644 --- a/include/dt-bindings/reset/mtk-reset.h +++ b/include/dt-bindings/reset/mt7623-reset.h @@ -6,11 +6,9 @@ #ifndef _DT_BINDINGS_MTK_RESET_H_ #define _DT_BINDINGS_MTK_RESET_H_ -/* ETHSYS */ +/* ETHSYS resets */ #define ETHSYS_PPE_RST 31 -#define ETHSYS_EPHY_RST 24 #define ETHSYS_GMAC_RST 23 -#define ETHSYS_ESW_RST 16 #define ETHSYS_FE_RST 6 #define ETHSYS_MCM_RST 2 #define ETHSYS_SYS_RST 0 diff --git a/include/dt-bindings/reset/mt7629-reset.h b/include/dt-bindings/reset/mt7629-reset.h new file mode 100644 index 0000000000..8f1634f7a6 --- /dev/null +++ b/include/dt-bindings/reset/mt7629-reset.h @@ -0,0 +1,36 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) 2019 MediaTek Inc. + */ + +#ifndef _DT_BINDINGS_MTK_RESET_H_ +#define _DT_BINDINGS_MTK_RESET_H_ + +/* PCIe Subsystem resets */ +#define PCIE1_CORE_RST 19 +#define PCIE1_MMIO_RST 20 +#define PCIE1_HRST 21 +#define PCIE1_USER_RST 22 +#define PCIE1_PIPE_RST 23 +#define PCIE0_CORE_RST 27 +#define PCIE0_MMIO_RST 28 +#define PCIE0_HRST 29 +#define PCIE0_USER_RST 30 +#define PCIE0_PIPE_RST 31 + +/* SSUSB Subsystem resets */ +#define SSUSB_PHY_PWR_RST 3 +#define SSUSB_MAC_PWR_RST 4 + +/* ETH Subsystem resets */ +#define ETHSYS_SYS_RST 0 +#define ETHSYS_MCM_RST 2 +#define ETHSYS_HSDMA_RST 5 +#define ETHSYS_FE_RST 6 +#define ETHSYS_ESW_RST 16 +#define ETHSYS_GMAC_RST 23 +#define ETHSYS_EPHY_RST 24 +#define ETHSYS_CRYPTO_RST 29 +#define ETHSYS_PPE_RST 31 + +#endif /* _DT_BINDINGS_MTK_RESET_H_ */ diff --git a/include/environment/ti/k3_rproc.h b/include/environment/ti/k3_rproc.h new file mode 100644 index 0000000000..3418cb42be --- /dev/null +++ b/include/environment/ti/k3_rproc.h @@ -0,0 +1,52 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com + * + * rproc environment variable definitions for various TI K3 SoCs. + */ + +#ifndef __TI_RPROC_H +#define __TI_RPROC_H + +/* + * should contain a list of <rproc_id fw_name> tuplies, + * override in board config files with the actual list + */ +#define DEFAULT_RPROCS "" + +#ifdef CONFIG_CMD_REMOTEPROC +#define EXTRA_ENV_RPROC_SETTINGS \ + "dorprocboot=0\0" \ + "boot_rprocs=" \ + "if test ${dorprocboot} -eq 1 && test ${boot} = mmc; then "\ + "rproc init;" \ + "run boot_rprocs_mmc;" \ + "fi;\0" \ + "rproc_load_and_boot_one=" \ + "if load mmc ${bootpart} $loadaddr ${rproc_fw}; then " \ + "if rproc load ${rproc_id} ${loadaddr} ${filesize}; then "\ + "rproc start ${rproc_id};" \ + "fi;" \ + "fi\0" \ + "boot_rprocs_mmc=" \ + "env set rproc_id;" \ + "env set rproc_fw;" \ + "for i in ${rproc_fw_binaries} ; do " \ + "if test -z \"${rproc_id}\" ; then " \ + "env set rproc_id $i;" \ + "else " \ + "env set rproc_fw $i;" \ + "run rproc_load_and_boot_one;" \ + "env set rproc_id;" \ + "env set rproc_fw;" \ + "fi;" \ + "done\0" \ + "rproc_fw_binaries=" \ + DEFAULT_RPROCS \ + "\0" +#else +#define EXTRA_ENV_RPROC_SETTINGS \ + "boot_rprocs= \0" +#endif /* CONFIG_CMD_REMOTEPROC */ + +#endif /* __TI_RPROC_H */ diff --git a/include/phy.h b/include/phy.h index f4530faeb9..e50f56b6eb 100644 --- a/include/phy.h +++ b/include/phy.h @@ -17,6 +17,11 @@ #include <phy_interface.h> #define PHY_FIXED_ID 0xa5a55a5a +/* + * There is no actual id for this. + * This is just a dummy id for gmii2rgmmi converter. + */ +#define PHY_GMII2RGMII_ID 0x5a5a5a5a #define PHY_MAX_ADDR 32 @@ -391,6 +396,7 @@ int phy_vitesse_init(void); int phy_xilinx_init(void); int phy_mscc_init(void); int phy_fixed_init(void); +int phy_xilinx_gmii2rgmii_init(void); int board_phy_config(struct phy_device *phydev); int get_phy_id(struct mii_dev *bus, int addr, int devad, u32 *phy_id); diff --git a/include/remoteproc.h b/include/remoteproc.h index 4987194905..046cd9e54e 100644 --- a/include/remoteproc.h +++ b/include/remoteproc.h @@ -122,9 +122,10 @@ struct dm_rproc_ops { * * @dev: Remote proc device * @da: Device address + * @size: Size of the memory region @da is pointing to * @return virtual address. */ - void * (*device_to_virt)(struct udevice *dev, ulong da); + void * (*device_to_virt)(struct udevice *dev, ulong da, ulong size); }; /* Accessor */ @@ -214,12 +215,68 @@ int rproc_is_running(int id); int rproc_elf32_sanity_check(ulong addr, ulong size); /** + * rproc_elf64_sanity_check() - Verify if an image is a valid ELF32 one + * + * Check if a valid ELF64 image exists at the given memory location. Verify + * basic ELF64 format requirements like magic number and sections size. + * + * @addr: address of the image to verify + * @size: size of the image + * @return 0 if the image looks good, else appropriate error value. + */ +int rproc_elf64_sanity_check(ulong addr, ulong size); + +/** + * rproc_elf_sanity_check() - Verify if an image is a valid ELF one + * + * Check if a valid ELF image exists at the given memory location. Auto + * detects ELF32/ELF64 and verifies basic ELF64/ELF32 format requirements + * like magic number and sections size. + * + * @addr: address of the image to verify + * @size: size of the image + * @return 0 if the image looks good, else appropriate error value. + */ +int rproc_elf_sanity_check(ulong addr, ulong size); + +/** * rproc_elf32_load_image() - load an ELF32 image * @dev: device loading the ELF32 image * @addr: valid ELF32 image address + * @size: size of the image * @return 0 if the image is successfully loaded, else appropriate error value. */ -int rproc_elf32_load_image(struct udevice *dev, unsigned long addr); +int rproc_elf32_load_image(struct udevice *dev, unsigned long addr, ulong size); + +/** + * rproc_elf64_load_image() - load an ELF64 image + * @dev: device loading the ELF64 image + * @addr: valid ELF64 image address + * @size: size of the image + * @return 0 if the image is successfully loaded, else appropriate error value. + */ +int rproc_elf64_load_image(struct udevice *dev, ulong addr, ulong size); + +/** + * rproc_elf_load_image() - load an ELF image + * @dev: device loading the ELF image + * @addr: valid ELF image address + * @size: size of the image + * + * Auto detects if the image is ELF32 or ELF64 image and load accordingly. + * @return 0 if the image is successfully loaded, else appropriate error value. + */ +int rproc_elf_load_image(struct udevice *dev, unsigned long addr, ulong size); + +/** + * rproc_elf_get_boot_addr() - Get rproc's boot address. + * @dev: device loading the ELF image + * @addr: valid ELF image address + * + * This function returns the entry point address of the ELF + * image. + */ +ulong rproc_elf_get_boot_addr(struct udevice *dev, ulong addr); #else static inline int rproc_init(void) { return -ENOSYS; } static inline int rproc_dev_init(int id) { return -ENOSYS; } @@ -232,8 +289,21 @@ static inline int rproc_ping(int id) { return -ENOSYS; } static inline int rproc_is_running(int id) { return -ENOSYS; } static inline int rproc_elf32_sanity_check(ulong addr, ulong size) { return -ENOSYS; } +static inline int rproc_elf64_sanity_check(ulong addr, + ulong size) { return -ENOSYS; } +static inline int rproc_elf_sanity_check(ulong addr, + ulong size) { return -ENOSYS; } static inline int rproc_elf32_load_image(struct udevice *dev, - unsigned long addr) { return -ENOSYS; } + unsigned long addr, ulong size) +{ return -ENOSYS; } +static inline int rproc_elf64_load_image(struct udevice *dev, ulong addr, + ulong size) +{ return -ENOSYS; } +static inline int rproc_elf_load_image(struct udevice *dev, ulong addr, + ulong size) +{ return -ENOSYS; } +static inline ulong rproc_elf_get_boot_addr(struct udevice *dev, ulong addr) +{ return 0; } #endif #endif /* _RPROC_H_ */ diff --git a/include/spl.h b/include/spl.h index 4359636d87..b5387ef273 100644 --- a/include/spl.h +++ b/include/spl.h @@ -434,6 +434,9 @@ int spl_mmc_load(struct spl_image_info *spl_image, int raw_part, unsigned long raw_sect); +int spl_ymodem_load_image(struct spl_image_info *spl_image, + struct spl_boot_device *bootdev); + /** * spl_invoke_atf - boot using an ARM trusted firmware image */ diff --git a/include/versalpl.h b/include/versalpl.h new file mode 100644 index 0000000000..b94c82e6e6 --- /dev/null +++ b/include/versalpl.h @@ -0,0 +1,20 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * (C) Copyright 2019 Xilinx, Inc, + * Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> + */ + +#ifndef _VERSALPL_H_ +#define _VERSALPL_H_ + +#include <xilinx.h> + +#define VERSAL_PM_LOAD_PDI 0x701 +#define VERSAL_PM_PDI_TYPE 0xF + +extern struct xilinx_fpga_op versal_op; + +#define XILINX_VERSAL_DESC \ +{ xilinx_versal, csu_dma, 1, &versal_op, 0, &versal_op } + +#endif /* _VERSALPL_H_ */ diff --git a/include/wait_bit.h b/include/wait_bit.h index 82e09da5ca..79da0811fe 100644 --- a/include/wait_bit.h +++ b/include/wait_bit.h @@ -72,10 +72,12 @@ static inline int wait_for_bit_##sfx(const void *reg, \ BUILD_WAIT_FOR_BIT(8, u8, readb) BUILD_WAIT_FOR_BIT(le16, u16, readw) +BUILD_WAIT_FOR_BIT(16, u16, readw) #ifdef readw_be BUILD_WAIT_FOR_BIT(be16, u16, readw_be) #endif BUILD_WAIT_FOR_BIT(le32, u32, readl) +BUILD_WAIT_FOR_BIT(32, u32, readl) #ifdef readl_be BUILD_WAIT_FOR_BIT(be32, u32, readl_be) #endif diff --git a/include/xilinx.h b/include/xilinx.h index af40befa52..ab4537becf 100644 --- a/include/xilinx.h +++ b/include/xilinx.h @@ -21,6 +21,7 @@ typedef enum { /* typedef xilinx_iface */ slave_selectmap, /* slave SelectMap (virtex2) */ devcfg, /* devcfg interface (zynq) */ csu_dma, /* csu_dma interface (zynqmp) */ + cfi, /* CFI interface(versal) */ max_xilinx_iface_type /* insert all new types before this */ } xilinx_iface; /* end, typedef xilinx_iface */ @@ -32,6 +33,7 @@ typedef enum { /* typedef xilinx_family */ xilinx_spartan3, /* Spartan-III Family */ xilinx_zynq, /* Zynq Family */ xilinx_zynqmp, /* ZynqMP Family */ + xilinx_versal, /* Versal Family */ max_xilinx_type /* insert all new types before this */ } xilinx_family; /* end, typedef xilinx_family */ diff --git a/include/zynqmp_firmware.h b/include/zynqmp_firmware.h new file mode 100644 index 0000000000..a20cbcdb86 --- /dev/null +++ b/include/zynqmp_firmware.h @@ -0,0 +1,37 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Xilinx Zynq MPSoC Firmware driver + * + * Copyright (C) 2018-2019 Xilinx, Inc. + */ + +#ifndef _ZYNQMP_FIRMWARE_H_ +#define _ZYNQMP_FIRMWARE_H_ + +enum pm_api_id { + PM_GET_API_VERSION = 1, + PM_SET_CONFIGURATION, + PM_SECURE_IMAGE = 45, +}; + +#define PM_SIP_SVC 0xc2000000 +#define ZYNQMP_SIP_SVC_PM_SECURE_IMG_LOAD \ + (PM_SIP_SVC + PM_SECURE_IMAGE) + +#define ZYNQMP_PM_VERSION_MAJOR 1 +#define ZYNQMP_PM_VERSION_MINOR 0 +#define ZYNQMP_PM_VERSION_MAJOR_SHIFT 16 +#define ZYNQMP_PM_VERSION_MINOR_MASK 0xFFFF + +#define ZYNQMP_PM_VERSION \ + ((ZYNQMP_PM_VERSION_MAJOR << ZYNQMP_PM_VERSION_MAJOR_SHIFT) | \ + ZYNQMP_PM_VERSION_MINOR) + +#define ZYNQMP_PM_VERSION_INVALID ~0 + +#define PMUFW_V1_0 ((1 << ZYNQMP_PM_VERSION_MAJOR_SHIFT) | 0) + +unsigned int zynqmp_firmware_version(void); +void zynqmp_pmufw_load_config_object(const void *cfg_obj, size_t size); + +#endif /* _ZYNQMP_FIRMWARE_H_ */ |