diff options
Diffstat (limited to 'include')
-rw-r--r-- | include/configs/nas220.h | 168 |
1 files changed, 168 insertions, 0 deletions
diff --git a/include/configs/nas220.h b/include/configs/nas220.h new file mode 100644 index 0000000000..cfb85bfe84 --- /dev/null +++ b/include/configs/nas220.h @@ -0,0 +1,168 @@ +/* + * Copyright (C) 2014 Evgeni Dobrev <evgeni@studio-punkt.com> + * + * based on work from: + * (C) Copyright 2009 + * Marvell Semiconductor <www.marvell.com> + * Written-by: Prafulla Wadaskar <prafulla@marvell.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _CONFIG_NAS220_H +#define _CONFIG_NAS220_H + +/* + * Machine type definition and ID + */ +#define MACH_TYPE_NAS220 MACH_TYPE_RD88F6192_NAS +#define CONFIG_MACH_TYPE MACH_TYPE_NAS220 +#define CONFIG_IDENT_STRING "\nNAS 220" + +/* + * High Level Configuration Options (easy to change) + */ +#define CONFIG_FEROCEON_88FR131 /* #define CPU Core subversion */ +#define CONFIG_KW88F6192 /* SOC Name */ +#define CONFIG_SYS_GENERIC_BOARD +#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ + +/* power-on led, regulator, sata0, sata1 */ +#define NAS220_GE_OE_VAL_LOW ((1 << 12)|(1 << 14)|(1 << 24)|(1 << 28)) +#define NAS220_GE_OE_VAL_HIGH (0) +#define NAS220_GE_OE_LOW (~((1 << 12)|(1 << 14)|(1 << 24)|(1 << 28))) +#define NAS220_GE_OE_HIGH (~(0)) + +/* PHY related */ +#define MV88E1116_LED_FCTRL_REG 10 +#define MV88E1116_CPRSP_CR3_REG 21 +#define MV88E1116_MAC_CTRL_REG 21 +#define MV88E1116_PGADR_REG 22 +#define MV88E1116_RGMII_TXTM_CTRL (1 << 4) +#define MV88E1116_RGMII_RXTM_CTRL (1 << 5) + +/* + * Commands configuration + */ +#define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ +#include <config_cmd_default.h> +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_MII +#define CONFIG_CMD_NAND +#define CONFIG_CMD_SAVEENV +#define CONFIG_CMD_PING +#define CONFIG_CMD_USB +#define CONFIG_CMD_DATE +#define CONFIG_CMD_IDE +#define CONFIG_SYS_LONGHELP +#define CONFIG_AUTO_COMPLETE +#define CONFIG_CMDLINE_EDITING +#define CONFIG_SYS_HUSH_PARSER +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " + +/* + * mv-common.h should be defined after CMD configs since it used them + * to enable certain macros + */ +#include "mv-common.h" + +/* Remove or override few declarations from mv-common.h */ +#undef CONFIG_SYS_PROMPT /* previously defined in mv-common.h */ +#define CONFIG_SYS_PROMPT "nas220> " + +/* + * Environment variables configurations + */ +#ifdef CONFIG_CMD_NAND +#define CONFIG_ENV_IS_IN_NAND +#define CONFIG_ENV_SECT_SIZE 0x10000 +#else +#define CONFIG_ENV_IS_NOWHERE +#endif + +#define CONFIG_ENV_SIZE 0x10000 +#define CONFIG_ENV_OFFSET 0xa0000 + +/* + * Default environment variables + */ +#define CONFIG_BOOTCOMMAND "" + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "bootargs=console=ttyS0,115200\0" \ + "mtdparts=mtdparts=orion_nand:0xa0000@0x0(uboot),"\ + "0x010000@0xa0000(env),"\ + "0x500000@0xc0000(uimage),"\ + "0x1a40000@0x5c0000(rootfs)\0" \ + "mtdids=nand0=orion_nand\0"\ + "bootdelay=-1\0"\ + "autostart=no\0"\ + "autoload=no\0" + +/* + * Ethernet Driver configuration + */ +#ifdef CONFIG_CMD_NET +#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ +#define CONFIG_PHY_BASE_ADR 8 +#endif /* CONFIG_CMD_NET */ + +/* + * USB/EHCI + */ +#ifdef CONFIG_CMD_USB +#define CONFIG_USB_EHCI /* Enable EHCI USB support */ +#define CONFIG_USB_EHCI_KIRKWOOD /* on Kirkwood platform */ +#define CONFIG_EHCI_IS_TDI +#define CONFIG_USB_STORAGE +#define CONFIG_DOS_PARTITION +#define CONFIG_SUPPORT_VFAT +#endif /* CONFIG_CMD_USB */ + +/* + * File system + */ +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_EXT4 +#define CONFIG_CMD_FAT +#define CONFIG_CMD_JFFS2 +#define CONFIG_JFFS2_NAND +#define CONFIG_JFFS2_LZO +#define CONFIG_CMD_UBI +#define CONFIG_CMD_UBIFS +#define CONFIG_RBTREE +#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ +#define CONFIG_MTD_PARTITIONS +#define CONFIG_CMD_MTDPARTS +#define CONFIG_LZO + +/* + * SATA + */ +#ifdef CONFIG_MVSATA_IDE +#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET +#define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET +#endif + + +/* + * Device Tree + */ +#define CONFIG_OF_LIBFDT + +/* + * EFI partition + */ +#define CONFIG_EFI_PARTITION + +/* + * Date Time + */ +#ifdef CONFIG_CMD_DATE +#define CONFIG_RTC_MV +#endif /* CONFIG_CMD_DATE */ + +#define CONFIG_KIRKWOOD_GPIO + +#endif /* _CONFIG_NAS220_H */ + |