diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/common.h | 1 | ||||
| -rw-r--r-- | include/config_distro_bootcmd.h | 4 | ||||
| -rw-r--r-- | include/configs/adp-ae3xx.h | 1 | ||||
| -rw-r--r-- | include/configs/adp-ag101p.h | 1 | ||||
| -rw-r--r-- | include/configs/mvebu_armada-8k.h | 5 | ||||
| -rw-r--r-- | include/configs/sama5d2_ptc.h | 114 | ||||
| -rw-r--r-- | include/configs/sama5d2_ptc_ek.h | 46 | ||||
| -rw-r--r-- | include/configs/wb45n.h | 161 | ||||
| -rw-r--r-- | include/configs/wb50n.h | 139 | ||||
| -rw-r--r-- | include/dt-bindings/mfd/stm32f7-rcc.h | 1 | ||||
| -rw-r--r-- | include/stm32_rcc.h | 91 |
11 files changed, 443 insertions, 121 deletions
diff --git a/include/common.h b/include/common.h index e14e1daa88..6e24545178 100644 --- a/include/common.h +++ b/include/common.h @@ -201,6 +201,7 @@ int last_stage_init(void); extern ulong monitor_flash_len; int mac_read_from_eeprom(void); extern u8 __dtb_dt_begin[]; /* embedded device tree blob */ +extern u8 __dtb_dt_spl_begin[]; /* embedded device tree blob for SPL/TPL */ int set_cpu_clk_info(void); int mdm_init(void); int print_cpuinfo(void); diff --git a/include/config_distro_bootcmd.h b/include/config_distro_bootcmd.h index e0d0034ed3..5c469a23fa 100644 --- a/include/config_distro_bootcmd.h +++ b/include/config_distro_bootcmd.h @@ -91,6 +91,10 @@ #define BOOTEFI_NAME "bootaa64.efi" #elif defined(CONFIG_ARM) #define BOOTEFI_NAME "bootarm.efi" +#elif defined(CONFIG_X86_RUN_32BIT) +#define BOOTEFI_NAME "bootia32.efi" +#elif defined(CONFIG_X86_RUN_64BIT) +#define BOOTEFI_NAME "bootx64.efi" #endif #endif diff --git a/include/configs/adp-ae3xx.h b/include/configs/adp-ae3xx.h index 6946029333..5644a6153b 100644 --- a/include/configs/adp-ae3xx.h +++ b/include/configs/adp-ae3xx.h @@ -91,7 +91,6 @@ /* * SD (MMC) controller */ -#define CONFIG_FTSDC010 #define CONFIG_FTSDC010_NUMBER 1 #define CONFIG_FTSDC010_SDIO diff --git a/include/configs/adp-ag101p.h b/include/configs/adp-ag101p.h index fad4d308e0..f2de384631 100644 --- a/include/configs/adp-ag101p.h +++ b/include/configs/adp-ag101p.h @@ -97,7 +97,6 @@ /* * SD (MMC) controller */ -#define CONFIG_FTSDC010 #define CONFIG_FTSDC010_NUMBER 1 #define CONFIG_FTSDC010_SDIO diff --git a/include/configs/mvebu_armada-8k.h b/include/configs/mvebu_armada-8k.h index fd60a9bfd4..d85527434a 100644 --- a/include/configs/mvebu_armada-8k.h +++ b/include/configs/mvebu_armada-8k.h @@ -73,11 +73,6 @@ #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 #define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE -/* Environment in SPI NOR flash */ -#ifdef CONFIG_MVEBU_SPI_BOOT -/* Environment in NAND flash */ -#endif - #define CONFIG_ENV_OFFSET 0x180000 /* as Marvell U-Boot version */ #define CONFIG_ENV_SIZE (64 << 10) /* 64KiB */ #define CONFIG_ENV_SECT_SIZE (64 << 10) /* 64KiB sectors */ diff --git a/include/configs/sama5d2_ptc.h b/include/configs/sama5d2_ptc.h deleted file mode 100644 index c52dcd4e8f..0000000000 --- a/include/configs/sama5d2_ptc.h +++ /dev/null @@ -1,114 +0,0 @@ -/* - * Configuration settings for the SAMA5D2 PTC Engineering board. - * - * Copyright (C) 2016 Atmel - * Wenyou Yang <wenyou.yang@atmel.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#include "at91-sama5_common.h" - -/* serial console */ -#define CONFIG_ATMEL_USART -#define CONFIG_USART_BASE 0xf801c000 -#define CONFIG_USART_ID 24 - -#define CONFIG_SYS_SDRAM_BASE 0x20000000 -#define CONFIG_SYS_SDRAM_SIZE 0x20000000 - -#define CONFIG_SYS_TIMER_COUNTER 0xf804803c - -#ifdef CONFIG_SPL_BUILD -#define CONFIG_SYS_INIT_SP_ADDR 0x210000 -#else -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE) -#endif - -#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ - -#undef CONFIG_AT91_GPIO -#define CONFIG_ATMEL_PIO4 - -/* SDRAM */ -#define CONFIG_NR_DRAM_BANKS 1 - -/* SerialFlash */ -#ifdef CONFIG_CMD_SF -#define CONFIG_ATMEL_SPI -#define CONFIG_SPI_FLASH_ATMEL -#define CONFIG_SF_DEFAULT_BUS 0 -#define CONFIG_SF_DEFAULT_CS 0 -#define CONFIG_SF_DEFAULT_SPEED 30000000 -#endif - -/* NAND flash */ -#ifdef CONFIG_CMD_NAND -#define CONFIG_NAND_ATMEL -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_SYS_NAND_BASE 0x80000000 -/* our ALE is AD21 */ -#define CONFIG_SYS_NAND_MASK_ALE (1 << 21) -/* our CLE is AD22 */ -#define CONFIG_SYS_NAND_MASK_CLE (1 << 22) -#define CONFIG_SYS_NAND_ONFI_DETECTION -/* PMECC & PMERRLOC */ -#define CONFIG_ATMEL_NAND_HWECC -#define CONFIG_ATMEL_NAND_HW_PMECC -#endif - -/* USB device */ - -/* Ethernet Hardware */ -#define CONFIG_MACB -#define CONFIG_RMII -#define CONFIG_NET_RETRY_COUNT 20 -#define CONFIG_MACB_SEARCH_PHY - -#ifdef CONFIG_NAND_BOOT -#undef CONFIG_ENV_OFFSET -#undef CONFIG_ENV_OFFSET_REDUND -#undef CONFIG_BOOTCOMMAND -/* u-boot env in nand flash */ -#define CONFIG_ENV_OFFSET 0x200000 -#define CONFIG_ENV_OFFSET_REDUND 0x400000 -#define CONFIG_BOOTCOMMAND "nand read 0x21000000 0xb80000 0x80000;" \ - "nand read 0x22000000 0x600000 0x600000;" \ - "bootz 0x22000000 - 0x21000000" -#endif - -/* SPL */ -#define CONFIG_SPL_FRAMEWORK -#define CONFIG_SPL_TEXT_BASE 0x200000 -#define CONFIG_SPL_MAX_SIZE 0x10000 -#define CONFIG_SPL_BSS_START_ADDR 0x20000000 -#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 -#define CONFIG_SYS_SPL_MALLOC_START 0x20080000 -#define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000 - -#define CONFIG_SYS_MONITOR_LEN (512 << 10) - -#ifdef CONFIG_SPI_BOOT -#define CONFIG_SPL_SPI_LOAD -#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x8000 - -#elif CONFIG_NAND_BOOT -#define CONFIG_SPL_NAND_DRIVERS -#define CONFIG_SPL_NAND_BASE -#endif -#define CONFIG_PMECC_CAP 8 -#define CONFIG_PMECC_SECTOR_SIZE 512 -#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x40000 -#define CONFIG_SYS_NAND_5_ADDR_CYCLE -#define CONFIG_SYS_NAND_PAGE_SIZE 0x1000 -#define CONFIG_SYS_NAND_PAGE_COUNT 64 -#define CONFIG_SYS_NAND_OOBSIZE 224 -#define CONFIG_SYS_NAND_BLOCK_SIZE 0x40000 -#define CONFIG_SYS_NAND_BAD_BLOCK_POS 0x0 -#define CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER - -#endif diff --git a/include/configs/sama5d2_ptc_ek.h b/include/configs/sama5d2_ptc_ek.h new file mode 100644 index 0000000000..d99eaee18f --- /dev/null +++ b/include/configs/sama5d2_ptc_ek.h @@ -0,0 +1,46 @@ +/* + * Configuration file for the SAMA5D2 PTC EK Board. + * + * Copyright (C) 2017 Microchip Technology Inc. + * Wenyou Yang <wenyou.yang@microchip.com> + * Ludovic Desroches <ludovic.desroches@microchip.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#include "at91-sama5_common.h" + +#undef CONFIG_SYS_AT91_MAIN_CLOCK +#define CONFIG_SYS_AT91_MAIN_CLOCK 24000000 /* from 24 MHz crystal */ + +#define CONFIG_MISC_INIT_R + +/* SDRAM */ +#define CONFIG_NR_DRAM_BANKS 1 +#define CONFIG_SYS_SDRAM_BASE 0x20000000 +#define CONFIG_SYS_SDRAM_SIZE 0x20000000 + +#define CONFIG_SYS_INIT_SP_ADDR \ + (CONFIG_SYS_SDRAM_BASE + 16 * 1024 - GENERATED_GBL_DATA_SIZE) + +#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ + +/* NAND Flash */ +#ifdef CONFIG_CMD_NAND +#define CONFIG_NAND_ATMEL +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_SYS_NAND_BASE ATMEL_BASE_CS3 +/* our ALE is AD21 */ +#define CONFIG_SYS_NAND_MASK_ALE BIT(21) +/* our CLE is AD22 */ +#define CONFIG_SYS_NAND_MASK_CLE BIT(22) +#define CONFIG_SYS_NAND_ONFI_DETECTION +/* PMECC & PMERRLOC */ +#define CONFIG_ATMEL_NAND_HWECC +#define CONFIG_ATMEL_NAND_HW_PMECC +#endif + +#endif /* __CONFIG_H */ diff --git a/include/configs/wb45n.h b/include/configs/wb45n.h new file mode 100644 index 0000000000..8989d55f53 --- /dev/null +++ b/include/configs/wb45n.h @@ -0,0 +1,161 @@ +/* + * Configuation settings for the WB45N CPU Module. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __CONFIG_H__ +#define __CONFIG_H__ + +#include <asm/hardware.h> + +#define CONFIG_SYS_TEXT_BASE 0x23f00000 + +/* ARM asynchronous clock */ +#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 +#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* 12 MHz crystal */ + +#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_INITRD_TAG +#define CONFIG_SKIP_LOWLEVEL_INIT + +/* general purpose I/O */ +#define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */ +#define CONFIG_AT91_GPIO + +/* serial console */ +#define CONFIG_ATMEL_USART +#define CONFIG_USART_BASE ATMEL_BASE_DBGU +#define CONFIG_USART_ID ATMEL_ID_SYS + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + +/* SDRAM */ +#define CONFIG_NR_DRAM_BANKS 1 +#define CONFIG_SYS_SDRAM_BASE 0x20000000 +#define CONFIG_SYS_SDRAM_SIZE 0x04000000 /* 64 MB */ + +#define CONFIG_SYS_INIT_SP_ADDR \ + (CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE) + +/* NAND flash */ +#define CONFIG_NAND_ATMEL +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_SYS_NAND_BASE 0x40000000 +/* our ALE is AD21 */ +#define CONFIG_SYS_NAND_MASK_ALE (1 << 21) +/* our CLE is AD22 */ +#define CONFIG_SYS_NAND_MASK_CLE (1 << 22) +#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PD4 +#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PD5 + +/* PMECC & PMERRLOC */ +#define CONFIG_ATMEL_NAND_HWECC 1 +#define CONFIG_ATMEL_NAND_HW_PMECC 1 +#define CONFIG_PMECC_CAP 4 +#define CONFIG_PMECC_SECTOR_SIZE 512 + +#define CONFIG_MTD_DEVICE +#define CONFIG_CMD_MTDPARTS +#define CONFIG_MTD_PARTITIONS +#define CONFIG_RBTREE +#define CONFIG_LZO + +/* Ethernet */ +#define CONFIG_MACB +#define CONFIG_RMII +#define CONFIG_NET_RETRY_COUNT 20 +#define CONFIG_MACB_SEARCH_PHY +#define CONFIG_ETHADDR C0:EE:40:00:00:00 +#define CONFIG_ENV_OVERWRITE 1 + +/* System */ +#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ +#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE +#define CONFIG_SYS_MEMTEST_END 0x23e00000 + +#ifdef CONFIG_SYS_USE_NANDFLASH +/* bootstrap + u-boot + env + linux in nandflash */ +#define CONFIG_ENV_OFFSET 0xa0000 +#define CONFIG_ENV_OFFSET_REDUND 0xc0000 +#define CONFIG_ENV_SIZE 0x20000 /* 1 block = 128 kB */ + +#define CONFIG_BOOTCOMMAND "nand read 0x22000000 0xe0000 0x280000; " \ + "run _mtd; bootm" + +#define MTDIDS_DEFAULT "nand0=atmel_nand" +#define MTDPARTS_DEFAULT "mtdparts=atmel_nand:" \ + "128K(at91bs)," \ + "512K(u-boot)," \ + "128K(u-boot-env)," \ + "128K(redund-env)," \ + "2560K(kernel-a)," \ + "2560K(kernel-b)," \ + "38912K(rootfs-a)," \ + "38912K(rootfs-b)," \ + "46208K(user)," \ + "512K(logs)" + +#else +#error No boot method selected, please select 'CONFIG_SYS_USE_NANDFLASH' +#endif + +#define CONFIG_BOOTARGS "console=ttyS0,115200 earlyprintk " \ + "rw noinitrd mem=64M " \ + "rootfstype=ubifs root=ubi0:rootfs ubi.mtd=6" + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "_mtd=mtdparts default; setenv bootargs ${bootargs} ${mtdparts}\0" \ + "autoload=no\0" \ + "autostart=no\0" \ + "ethaddr=" __stringify(CONFIG_ETHADDR) "\0" \ + "\0" + +#define CONFIG_SYS_CBSIZE 256 +#define CONFIG_SYS_MAXARGS 16 +#define CONFIG_SYS_LONGHELP +#define CONFIG_CMDLINE_EDITING +#define CONFIG_AUTO_COMPLETE + +/* + * Size of malloc() pool + */ +#define CONFIG_SYS_MALLOC_LEN (512 * 1024 + 0x1000) + +/* SPL */ +#define CONFIG_SPL_FRAMEWORK +#define CONFIG_SPL_TEXT_BASE 0x300000 +#define CONFIG_SPL_MAX_SIZE 0x6000 +#define CONFIG_SPL_STACK 0x308000 + +#define CONFIG_SPL_BSS_START_ADDR 0x20000000 +#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 +#define CONFIG_SYS_SPL_MALLOC_START 0x20080000 +#define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000 + +#define CONFIG_SYS_MONITOR_LEN (512 << 10) + +#define CONFIG_SYS_MASTER_CLOCK 132096000 +#define CONFIG_SYS_AT91_PLLA 0x20c73f03 +#define CONFIG_SYS_MCKR 0x1301 +#define CONFIG_SYS_MCKR_CSS 0x1302 + +#define CONFIG_SPL_NAND_DRIVERS +#define CONFIG_SPL_NAND_BASE +#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x20000 +#define CONFIG_SYS_NAND_5_ADDR_CYCLE +#define CONFIG_SYS_NAND_PAGE_SIZE 0x800 +#define CONFIG_SYS_NAND_PAGE_COUNT 64 +#define CONFIG_SYS_NAND_OOBSIZE 64 +#define CONFIG_SYS_NAND_BLOCK_SIZE 0x20000 +#define CONFIG_SYS_NAND_BAD_BLOCK_POS 0x0 +#define CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER + +#endif /* __CONFIG_H__ */ diff --git a/include/configs/wb50n.h b/include/configs/wb50n.h new file mode 100644 index 0000000000..4ab81c864b --- /dev/null +++ b/include/configs/wb50n.h @@ -0,0 +1,139 @@ +/* + * Configuation settings for the WB50N CPU Module. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#include <asm/hardware.h> + +#define CONFIG_SYS_TEXT_BASE 0x23f00000 + +/* ARM asynchronous clock */ +#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 +#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */ + +#define CONFIG_ARCH_CPU_INIT + +#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_INITRD_TAG + +#ifndef CONFIG_SPL_BUILD +#define CONFIG_SKIP_LOWLEVEL_INIT +#endif + +#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG +#define CONFIG_IMAGE_FORMAT_LEGACY + +/* general purpose I/O */ +#define CONFIG_AT91_GPIO + +/* serial console */ +#define CONFIG_ATMEL_USART +#define CONFIG_USART_BASE ATMEL_BASE_DBGU +#define CONFIG_USART_ID ATMEL_ID_DBGU + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + +/* SDRAM */ +#define CONFIG_NR_DRAM_BANKS 1 +#define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_DDRCS +#define CONFIG_SYS_SDRAM_SIZE 0x04000000 + +#ifdef CONFIG_SPL_BUILD +#define CONFIG_SYS_INIT_SP_ADDR 0x310000 +#else +#define CONFIG_SYS_INIT_SP_ADDR \ + (CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE) +#endif + +#define CONFIG_SYS_MEMTEST_START 0x21000000 +#define CONFIG_SYS_MEMTEST_END 0x22000000 +#define CONFIG_SYS_ALT_MEMTEST + +/* NAND flash */ +#define CONFIG_NAND_ATMEL +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_SYS_NAND_BASE ATMEL_BASE_CS3 +/* our ALE is AD21 */ +#define CONFIG_SYS_NAND_MASK_ALE (1 << 21) +/* our CLE is AD22 */ +#define CONFIG_SYS_NAND_MASK_CLE (1 << 22) +#define CONFIG_SYS_NAND_ONFI_DETECTION +/* PMECC & PMERRLOC */ +#define CONFIG_ATMEL_NAND_HWECC +#define CONFIG_ATMEL_NAND_HW_PMECC +#define CONFIG_PMECC_CAP 8 +#define CONFIG_PMECC_SECTOR_SIZE 512 + +/* Ethernet Hardware */ +#define CONFIG_MACB +#define CONFIG_RMII +#define CONFIG_NET_RETRY_COUNT 20 +#define CONFIG_MACB_SEARCH_PHY +#define CONFIG_RGMII +#define CONFIG_ETHADDR C0:EE:40:00:00:00 +#define CONFIG_ENV_OVERWRITE 1 + +#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "autoload=no\0" \ + "autostart=no\0" + +/* bootstrap + u-boot + env in nandflash */ +#define CONFIG_ENV_OFFSET 0xA0000 +#define CONFIG_ENV_OFFSET_REDUND 0xC0000 +#define CONFIG_ENV_SIZE 0x20000 +#define CONFIG_BOOTCOMMAND \ + "nand read 0x22000000 0x000e0000 0x500000; " \ + "bootm" + +#define CONFIG_BOOTARGS \ + "rw rootfstype=ubifs ubi.mtd=6 root=ubi0:rootfs" + +#define CONFIG_BAUDRATE 115200 + +#define CONFIG_SYS_CBSIZE 1024 +#define CONFIG_SYS_MAXARGS 16 +#define CONFIG_SYS_PBSIZE \ + (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_LONGHELP +#define CONFIG_CMDLINE_EDITING +#define CONFIG_AUTO_COMPLETE + +/* Size of malloc() pool */ +#define CONFIG_SYS_MALLOC_LEN (2 * 1024 * 1024) + +/* SPL */ +#define CONFIG_SPL_FRAMEWORK +#define CONFIG_SPL_TEXT_BASE 0x300000 +#define CONFIG_SPL_MAX_SIZE 0x10000 +#define CONFIG_SPL_BSS_START_ADDR 0x20000000 +#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 +#define CONFIG_SYS_SPL_MALLOC_START 0x20080000 +#define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000 + +#define CONFIG_SYS_MONITOR_LEN (512 << 10) + +#define CONFIG_SPL_NAND_DRIVERS +#define CONFIG_SPL_NAND_BASE +#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x20000 +#define CONFIG_SYS_NAND_5_ADDR_CYCLE +#define CONFIG_SYS_NAND_PAGE_SIZE 0x800 +#define CONFIG_SYS_NAND_PAGE_COUNT 64 +#define CONFIG_SYS_NAND_OOBSIZE 64 +#define CONFIG_SYS_NAND_BLOCK_SIZE 0x20000 +#define CONFIG_SYS_NAND_BAD_BLOCK_POS 0x0 +#define CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER + +#endif diff --git a/include/dt-bindings/mfd/stm32f7-rcc.h b/include/dt-bindings/mfd/stm32f7-rcc.h index e36cc69959..44c0914493 100644 --- a/include/dt-bindings/mfd/stm32f7-rcc.h +++ b/include/dt-bindings/mfd/stm32f7-rcc.h @@ -90,6 +90,7 @@ #define STM32F7_RCC_APB2_TIM8 1 #define STM32F7_RCC_APB2_USART1 4 #define STM32F7_RCC_APB2_USART6 5 +#define STM32F7_RCC_APB2_SDMMC2 7 #define STM32F7_RCC_APB2_ADC1 8 #define STM32F7_RCC_APB2_ADC2 9 #define STM32F7_RCC_APB2_ADC3 10 diff --git a/include/stm32_rcc.h b/include/stm32_rcc.h new file mode 100644 index 0000000000..063177bc98 --- /dev/null +++ b/include/stm32_rcc.h @@ -0,0 +1,91 @@ +/* + * Copyright (C) STMicroelectronics SA 2017 + * Author(s): Patrice CHOTARD, <patrice.chotard@st.com> for STMicroelectronics. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __STM32_RCC_H_ +#define __STM32_RCC_H_ + +#define AHB_PSC_1 0 +#define AHB_PSC_2 0x8 +#define AHB_PSC_4 0x9 +#define AHB_PSC_8 0xA +#define AHB_PSC_16 0xB +#define AHB_PSC_64 0xC +#define AHB_PSC_128 0xD +#define AHB_PSC_256 0xE +#define AHB_PSC_512 0xF + +#define APB_PSC_1 0 +#define APB_PSC_2 0x4 +#define APB_PSC_4 0x5 +#define APB_PSC_8 0x6 +#define APB_PSC_16 0x7 + +struct pll_psc { + u8 pll_m; + u16 pll_n; + u8 pll_p; + u8 pll_q; + u8 ahb_psc; + u8 apb1_psc; + u8 apb2_psc; +}; + +struct stm32_clk_info { + struct pll_psc sys_pll_psc; + bool has_overdrive; + bool v2; +}; + +enum soc_family { + STM32F4, + STM32F7, +}; + +struct stm32_rcc_clk { + char *drv_name; + enum soc_family soc; +}; + +struct stm32_rcc_regs { + u32 cr; /* RCC clock control */ + u32 pllcfgr; /* RCC PLL configuration */ + u32 cfgr; /* RCC clock configuration */ + u32 cir; /* RCC clock interrupt */ + u32 ahb1rstr; /* RCC AHB1 peripheral reset */ + u32 ahb2rstr; /* RCC AHB2 peripheral reset */ + u32 ahb3rstr; /* RCC AHB3 peripheral reset */ + u32 rsv0; + u32 apb1rstr; /* RCC APB1 peripheral reset */ + u32 apb2rstr; /* RCC APB2 peripheral reset */ + u32 rsv1[2]; + u32 ahb1enr; /* RCC AHB1 peripheral clock enable */ + u32 ahb2enr; /* RCC AHB2 peripheral clock enable */ + u32 ahb3enr; /* RCC AHB3 peripheral clock enable */ + u32 rsv2; + u32 apb1enr; /* RCC APB1 peripheral clock enable */ + u32 apb2enr; /* RCC APB2 peripheral clock enable */ + u32 rsv3[2]; + u32 ahb1lpenr; /* RCC AHB1 periph clk enable in low pwr mode */ + u32 ahb2lpenr; /* RCC AHB2 periph clk enable in low pwr mode */ + u32 ahb3lpenr; /* RCC AHB3 periph clk enable in low pwr mode */ + u32 rsv4; + u32 apb1lpenr; /* RCC APB1 periph clk enable in low pwr mode */ + u32 apb2lpenr; /* RCC APB2 periph clk enable in low pwr mode */ + u32 rsv5[2]; + u32 bdcr; /* RCC Backup domain control */ + u32 csr; /* RCC clock control & status */ + u32 rsv6[2]; + u32 sscgr; /* RCC spread spectrum clock generation */ + u32 plli2scfgr; /* RCC PLLI2S configuration */ + /* below registers are only available on STM32F46x and STM32F7 SoCs*/ + u32 pllsaicfgr; /* PLLSAI configuration */ + u32 dckcfgr; /* dedicated clocks configuration register */ + /* Below registers are only available on STM32F7 SoCs */ + u32 dckcfgr2; /* dedicated clocks configuration register */ +}; + +#endif /* __STM32_RCC_H_ */ |