diff options
Diffstat (limited to 'include')
37 files changed, 1007 insertions, 448 deletions
diff --git a/include/.gitignore b/include/.gitignore new file mode 100644 index 0000000000..d8fda80d5e --- /dev/null +++ b/include/.gitignore @@ -0,0 +1,6 @@ +/asm +/asm-ppc/arch +/bmp_logo.h +/config.h +/config.mk +/version_autogenerated.h diff --git a/include/asm-arm/arch-at91rm9200/hardware.h b/include/asm-arm/arch-at91rm9200/hardware.h index 8bb0c47523..b868e38a3e 100644 --- a/include/asm-arm/arch-at91rm9200/hardware.h +++ b/include/asm-arm/arch-at91rm9200/hardware.h @@ -24,8 +24,6 @@ #ifndef __ASSEMBLY__ #include "AT91RM9200.h" -#else -#include "AT91RM9200_inc.h" #endif /* Virtual and Physical base address for system peripherals */ diff --git a/include/asm-m68k/immap_5329.h b/include/asm-m68k/immap_5329.h index 2a3980c130..271c27655b 100644 --- a/include/asm-m68k/immap_5329.h +++ b/include/asm-m68k/immap_5329.h @@ -57,7 +57,8 @@ #define MMAP_PWM 0xFC090000 #define MMAP_EPORT 0xFC094000 #define MMAP_WDOG 0xFC098000 -#define MMAP_CCM 0xFC0A0000 +#define MMAP_RCM 0xFC0A0000 +#define MMAP_CCM 0xFC0A0004 #define MMAP_GPIO 0xFC0A4000 #define MMAP_RTC 0xFC0A8000 #define MMAP_LCDC 0xFC0AC000 @@ -479,20 +480,22 @@ typedef struct wdog_ctrl { /*Chip configuration module registers */ typedef struct ccm_ctrl { - u8 rstctrl; /* 0x00 Reset Controller register */ - u8 rststat; /* 0x01 Reset Status register */ - u16 res1; /* 0x02 - 0x03 */ - u16 ccr; /* 0x04 Chip configuration register */ - u16 res2; /* 0x06 */ - u16 rcon; /* 0x08 Rreset configuration register */ - u16 cir; /* 0x0A Chip identification register */ - u32 res3; /* 0x0C */ - u16 misccr; /* 0x10 Miscellaneous control register */ - u16 cdr; /* 0x12 Clock divider register */ - u16 uhcsr; /* 0x14 USB Host controller status register */ - u16 uocsr; /* 0x16 USB On-the-Go Controller Status Register */ + u16 ccr; /* 0x00 Chip configuration register */ + u16 res2; /* 0x02 */ + u16 rcon; /* 0x04 Rreset configuration register */ + u16 cir; /* 0x06 Chip identification register */ + u32 res3; /* 0x08 */ + u16 misccr; /* 0x0A Miscellaneous control register */ + u16 cdr; /* 0x0C Clock divider register */ + u16 uhcsr; /* 0x10 USB Host controller status register */ + u16 uocsr; /* 0x12 USB On-the-Go Controller Status Reg */ } ccm_t; +typedef struct rcm { + u8 rcr; + u8 rsr; +} rcm_t; + /* GPIO port registers */ typedef struct gpio_ctrl { /* Port Output Data Registers */ diff --git a/include/asm-m68k/m5329.h b/include/asm-m68k/m5329.h index cd69fb0b5a..3f056511cb 100644 --- a/include/asm-m68k/m5329.h +++ b/include/asm-m68k/m5329.h @@ -246,6 +246,21 @@ #define CSCR_BSTW (0x00000008) /********************************************************************* +* Reset Controller Module (RCM) +*********************************************************************/ + +/* Bit definitions and macros for RCR */ +#define RCM_RCR_FRCRSTOUT (0x40) +#define RCM_RCR_SOFTRST (0x80) + +/* Bit definitions and macros for RSR */ +#define RCM_RSR_LOL (0x01) +#define RCM_RSR_WDR_CORE (0x02) +#define RCM_RSR_EXT (0x04) +#define RCM_RSR_POR (0x08) +#define RCM_RSR_SOFT (0x20) + +/********************************************************************* * FlexCAN Module (CAN) *********************************************************************/ /* Bit definitions and macros for CAN_CANMCR */ diff --git a/include/asm-m68k/m5445x.h b/include/asm-m68k/m5445x.h index 8b886b0b60..b2bfb69264 100644 --- a/include/asm-m68k/m5445x.h +++ b/include/asm-m68k/m5445x.h @@ -792,8 +792,8 @@ #define GPIO_PAR_FEC_FEC0_MASK (0xF8) #define GPIO_PAR_FEC_FEC0_MII (0x07) #define GPIO_PAR_FEC_FEC0_RMII_GPIO (0x03) -#define GPIO_PAR_FEC_FEC0_RMII_ATA (0x02) -#define GPIO_PAR_FEC_FEC0_ATA (0x01) +#define GPIO_PAR_FEC_FEC0_RMII_ULPI (0x02) +#define GPIO_PAR_FEC_FEC0_ULPI (0x01) #define GPIO_PAR_FEC_FEC0_GPIO (0x00) /* Bit definitions and macros for PAR_DMA */ diff --git a/include/asm-mips/addrspace.h b/include/asm-mips/addrspace.h index b8214b1c85..0e6abd7d0f 100644 --- a/include/asm-mips/addrspace.h +++ b/include/asm-mips/addrspace.h @@ -49,7 +49,7 @@ cannot access physical memory directly from core */ #define UNCACHED_SDRAM(a) (((unsigned long)(a)) | 0x20000000) #else /* !CONFIG_AU1X00 */ -#define UNCACHED_SDRAM(a) PHYSADDR(a) +#define UNCACHED_SDRAM(a) KSEG1ADDR(a) #endif /* CONFIG_AU1X00 */ #endif /* __ASSEMBLY__ */ /* diff --git a/include/asm-mips/io.h b/include/asm-mips/io.h index cd4d5dc9d9..1e060f7c31 100644 --- a/include/asm-mips/io.h +++ b/include/asm-mips/io.h @@ -71,7 +71,21 @@ * instruction, so the lower 16 bits must be zero. Should be true on * on any sane architecture; generic code does not use this assumption. */ -extern unsigned long mips_io_port_base; +extern const unsigned long mips_io_port_base; + +/* + * Gcc will generate code to load the value of mips_io_port_base after each + * function call which may be fairly wasteful in some cases. So we don't + * play quite by the book. We tell gcc mips_io_port_base is a long variable + * which solves the code generation issue. Now we need to violate the + * aliasing rules a little to make initialization possible and finally we + * will need the barrier() to fight side effects of the aliasing chat. + * This trickery will eventually collapse under gcc's optimizer. Oh well. + */ +static inline void set_io_port_base(unsigned long base) +{ + * (unsigned long *) &mips_io_port_base = base; +} /* * Thanks to James van Artsdalen for a better timing-fix than diff --git a/include/common.h b/include/common.h index 77aed1a318..edd00247eb 100644 --- a/include/common.h +++ b/include/common.h @@ -63,19 +63,13 @@ typedef volatile unsigned char vu_char; #endif #elif defined(CONFIG_5xx) #include <asm/5xx_immap.h> -#define CONFIG_RELOC_FIXUP_WORKS #elif defined(CONFIG_MPC5xxx) #include <mpc5xxx.h> -#define CONFIG_RELOC_FIXUP_WORKS #elif defined(CONFIG_MPC512X) #include <mpc512x.h> #include <asm/immap_512x.h> -#define CONFIG_RELOC_FIXUP_WORKS #elif defined(CONFIG_MPC8220) #include <asm/immap_8220.h> -#define CONFIG_RELOC_FIXUP_WORKS -#elif defined(CONFIG_824X) -#define CONFIG_RELOC_FIXUP_WORKS #elif defined(CONFIG_8260) #if defined(CONFIG_MPC8247) \ || defined(CONFIG_MPC8248) \ @@ -87,7 +81,6 @@ typedef volatile unsigned char vu_char; #define CONFIG_MPC8260 1 #endif #include <asm/immap_8260.h> -#define CONFIG_RELOC_FIXUP_WORKS #endif #ifdef CONFIG_MPC86xx #include <mpc86xx.h> @@ -100,7 +93,6 @@ typedef volatile unsigned char vu_char; #ifdef CONFIG_MPC83XX #include <mpc83xx.h> #include <asm/immap_83xx.h> -#define CONFIG_RELOC_FIXUP_WORKS #endif #ifdef CONFIG_4xx #include <ppc4xx.h> diff --git a/include/configs/ADNPESC1.h b/include/configs/ADNPESC1.h index 77938b140d..c45c39554e 100644 --- a/include/configs/ADNPESC1.h +++ b/include/configs/ADNPESC1.h @@ -574,38 +574,30 @@ /* * Command line configuration. */ -#include <config_cmd_all.h> - -#undef CONFIG_CMD_ASKENV -#undef CONFIG_CMD_BEDBUG -#undef CONFIG_CMD_BMP -#undef CONFIG_CMD_CACHE -#undef CONFIG_CMD_DOC -#undef CONFIG_CMD_DTT -#undef CONFIG_CMD_EEPROM -#undef CONFIG_CMD_ELF -#undef CONFIG_CMD_FAT -#undef CONFIG_CMD_FDC -#undef CONFIG_CMD_FDOS -#undef CONFIG_CMD_HWFLOW -#undef CONFIG_CMD_IDE -#undef CONFIG_CMD_I2C -#undef CONFIG_CMD_JFFS2 -#undef CONFIG_CMD_KGDB -#undef CONFIG_CMD_NAND +#include <config_cmd_default.h> + +#define CONFIG_CMD_BSP +#define CONFIG_CMD_CDP +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DIAG +#define CONFIG_CMD_DISPLAY +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_IMMAP +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_PING +#define CONFIG_CMD_PORTIO +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_REISER +#define CONFIG_CMD_SAVES +#define CONFIG_CMD_SDRAM +#define CONFIG_CMD_SNTP + #undef CONFIG_CMD_NFS -#undef CONFIG_CMD_MMC -#undef CONFIG_CMD_MII -#undef CONFIG_CMD_PCI -#undef CONFIG_CMD_PCMCIA -#undef CONFIG_CMD_SCSI -#undef CONFIG_CMD_VFD -#undef CONFIG_CMD_USB #undef CONFIG_CMD_XIMG -#if (CFG_NIOS_CPU_SPI_NUMS != 1) -#undef CONFIG_CMD_SPI -#undef CONFIG_CMD_DATE +#if (CFG_NIOS_CPU_SPI_NUMS == 1) +#define CONFIG_CMD_DATE +#define CONFIG_CMD_SPI #endif /*------------------------------------------------------------------------ diff --git a/include/configs/DK1C20.h b/include/configs/DK1C20.h index 0ddf0e3aeb..eb78080208 100644 --- a/include/configs/DK1C20.h +++ b/include/configs/DK1C20.h @@ -459,38 +459,27 @@ /* * Command line configuration. */ -#include <config_cmd_all.h> - -#undef CONFIG_CMD_ASKENV -#undef CONFIG_CMD_BEDBUG -#undef CONFIG_CMD_BMP -#undef CONFIG_CMD_BSP -#undef CONFIG_CMD_CACHE -#undef CONFIG_CMD_DATE -#undef CONFIG_CMD_DOC -#undef CONFIG_CMD_DTT -#undef CONFIG_CMD_EEPROM -#undef CONFIG_CMD_ELF -#undef CONFIG_CMD_FDC -#undef CONFIG_CMD_FDOS -#undef CONFIG_CMD_HWFLOW -#undef CONFIG_CMD_I2C -#undef CONFIG_CMD_JFFS2 -#undef CONFIG_CMD_KGDB -#undef CONFIG_CMD_NAND +#include <config_cmd_default.h> + +#define CONFIG_CMD_CDP +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DIAG +#define CONFIG_CMD_DISPLAY +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FAT +#define CONFIG_CMD_IDE +#define CONFIG_CMD_IMMAP +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_PING +#define CONFIG_CMD_PORTIO +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_SAVES +#define CONFIG_CMD_SDRAM +#define CONFIG_CMD_SNTP + #undef CONFIG_CMD_NFS -#undef CONFIG_CMD_MMC -#undef CONFIG_CMD_MII -#undef CONFIG_CMD_PCI -#undef CONFIG_CMD_PCMCIA -#undef CONFIG_CMD_REISER -#undef CONFIG_CMD_SCSI -#undef CONFIG_CMD_SPI -#undef CONFIG_CMD_VFD -#undef CONFIG_CMD_USB #undef CONFIG_CMD_XIMG - /*------------------------------------------------------------------------ * COMPACT FLASH *----------------------------------------------------------------------*/ diff --git a/include/configs/DK1S10.h b/include/configs/DK1S10.h index 0032fd3db7..bd360717a7 100644 --- a/include/configs/DK1S10.h +++ b/include/configs/DK1S10.h @@ -466,38 +466,25 @@ /* * Command line configuration. */ -#include <config_cmd_all.h> - -#undef CONFIG_CMD_ASKENV -#undef COND_CMD_BEDBUG -#undef COND_CMD_BMP -#undef COND_CMD_BSP -#undef COND_CMD_CACHE -#undef COND_CMD_DATE -#undef COND_CMD_DOC -#undef COND_CMD_DTT -#undef COND_CMD_EEPROM -#undef COND_CMD_ELF -#undef COND_CMD_FAT -#undef COND_CMD_FDC -#undef COND_CMD_FDOS -#undef COND_CMD_HWFLOW -#undef COND_CMD_IDE -#undef COND_CMD_I2C -#undef COND_CMD_JFFS2 -#undef COND_CMD_KGDB -#undef COND_CMD_NAND -#undef COND_CMD_NFS -#undef COND_CMD_MMC -#undef COND_CMD_MII -#undef COND_CMD_PCI -#undef COND_CMD_PCMCIA -#undef COND_CMD_SCSI -#undef COND_CMD_SPI -#undef COND_CMD_VFD -#undef COND_CMD_USB -#undef COND_CMD_XIMG - +#include <config_cmd_default.h> + +#define CONFIG_CMD_CDP +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DIAG +#define CONFIG_CMD_DISPLAY +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_IMMAP +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_PING +#define CONFIG_CMD_PORTIO +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_REISER +#define CONFIG_CMD_SAVES +#define CONFIG_CMD_SDRAM +#define CONFIG_CMD_SNTP + +#undef CONFIG_CMD_NFS +#undef CONFIG_CMD_XIMG /*------------------------------------------------------------------------ * KGDB diff --git a/include/configs/IDS8247.h b/include/configs/IDS8247.h index 85d2bb3f51..bb87fae8c4 100644 --- a/include/configs/IDS8247.h +++ b/include/configs/IDS8247.h @@ -120,6 +120,17 @@ #define CFG_NS16550_COM1 (CFG_UART_BASE + 0x8000) + +/* pass open firmware flat tree */ +#define CONFIG_OF_LIBFDT 1 +#define CONFIG_OF_BOARD_SETUP 1 + +#define OF_CPU "PowerPC,8247@0" +#define OF_SOC "soc@f0000000" +#define OF_TBCLK (bd->bi_busfreq / 4) +#define OF_STDOUT_PATH "/soc@f0000000/serial8250@e0008000" + + /* * select ethernet configuration * @@ -133,16 +144,18 @@ #undef CONFIG_ETHER_ON_SCC /* define if ether on SCC */ #define CONFIG_ETHER_ON_FCC /* define if ether on FCC */ #undef CONFIG_ETHER_NONE /* define if ether on something else */ -#define CONFIG_ETHER_INDEX 2 /* which SCC/FCC channel for ethernet */ +#define CONFIG_ETHER_INDEX 1 /* which SCC/FCC channel for ethernet */ +#define CONFIG_ETHER_ON_FCC1 +#define FCC_ENET /* - * - Rx-CLK is CLK13 - * - Tx-CLK is CLK14 + * - Rx-CLK is CLK10 + * - Tx-CLK is CLK9 * - RAM for BD/Buffers is on the 60x Bus (see 28-13) * - Enable Full Duplex in FSMR */ -# define CFG_CMXFCR_MASK (CMXFCR_FC2|CMXFCR_RF2CS_MSK|CMXFCR_TF2CS_MSK) -# define CFG_CMXFCR_VALUE (CMXFCR_RF2CS_CLK13|CMXFCR_TF2CS_CLK14) +# define CFG_CMXFCR_MASK (CMXFCR_FC1|CMXFCR_RF1CS_MSK|CMXFCR_TF1CS_MSK) +# define CFG_CMXFCR_VALUE (CMXFCR_RF1CS_CLK10|CMXFCR_TF1CS_CLK9) # define CFG_CPMFCR_RAMTYPE 0 # define CFG_FCC_PSMR (FCC_PSMR_FDE|FCC_PSMR_LPB) @@ -166,6 +179,8 @@ #define CONFIG_BOOTP_BOOTPATH #define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_RTC_PCF8563 +#define CFG_I2C_RTC_ADDR 0x51 /* * Command line configuration. @@ -211,7 +226,10 @@ */ #define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ - +#define CFG_FLASH_CFI /* The flash is CFI compatible */ +#define CFG_FLASH_CFI_DRIVER /* Use common CFI driver */ +#define CFG_FLASH_BANKS_LIST { 0xFF800000 } +#define CFG_MAX_FLASH_BANKS_DETECT 1 /* What should the base address of the main FLASH be and how big is * it (in MBytes)? This must contain TEXT_BASE from board/ids8247/config.mk * The main FLASH is whichever is connected to *CS0. @@ -227,7 +245,7 @@ * FLASH organization */ #define CFG_MAX_FLASH_BANKS 1 /* max num of memory banks */ -#define CFG_MAX_FLASH_SECT 64 /* max num of sects on one chip */ +#define CFG_MAX_FLASH_SECT 128 /* max num of sects on one chip */ #define CFG_FLASH_ERASE_TOUT 240000 /* Flash Erase Timeout (in ms) */ #define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */ @@ -511,12 +529,12 @@ */ #define CFG_OR2 ((~(CFG_GLOBAL_SDRAM_LIMIT-1) & ORxS_SDAM_MSK) |\ ORxS_BPD_4 |\ - ORxS_ROWST_PBI0_A10 |\ + ORxS_ROWST_PBI0_A9 |\ ORxS_NUMR_12) -#define CFG_PSDMR (PSDMR_SDAM_A13_IS_A5 |\ +#define CFG_PSDMR (PSDMR_SDAM_A14_IS_A5 |\ PSDMR_BSMA_A15_A17 |\ - PSDMR_SDA10_PBI0_A11 |\ + PSDMR_SDA10_PBI0_A10 |\ PSDMR_RFRC_5_CLK |\ PSDMR_PRETOACT_2W |\ PSDMR_ACTTORW_2W |\ diff --git a/include/configs/LANTEC.h b/include/configs/LANTEC.h index 46edd08a91..e92069b5a9 100644 --- a/include/configs/LANTEC.h +++ b/include/configs/LANTEC.h @@ -87,37 +87,23 @@ /* * Command line configuration. */ -#include <config_cmd_all.h> - -#undef CONFIG_CMD_BEDBUG -#undef CONFIG_CMD_BMP -#undef CONFIG_CMD_BSP -#undef CONFIG_CMD_DISPLAY -#undef CONFIG_CMD_DOC -#undef CONFIG_CMD_DTT -#undef CONFIG_CMD_EEPROM -#undef CONFIG_CMD_ELF -#undef CONFIG_CMD_EXT2 -#undef CONFIG_CMD_FDC -#undef CONFIG_CMD_FDOS -#undef CONFIG_CMD_HWFLOW -#undef CONFIG_CMD_I2C -#undef CONFIG_CMD_IDE -#undef CONFIG_CMD_IRQ -#undef CONFIG_CMD_JFFS2 -#undef CONFIG_CMD_KGDB -#undef CONFIG_CMD_MFSL -#undef CONFIG_CMD_MII -#undef CONFIG_CMD_MMC -#undef CONFIG_CMD_NAND -#undef CONFIG_CMD_PCI -#undef CONFIG_CMD_PCMCIA -#undef CONFIG_CMD_REISER -#undef CONFIG_CMD_SCSI -#undef CONFIG_CMD_SPI -#undef CONFIG_CMD_UNIVERSE -#undef CONFIG_CMD_USB -#undef CONFIG_CMD_VFD +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_CDP +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DIAG +#define CONFIG_CMD_FAT +#define CONFIG_CMD_IMMAP +#define CONFIG_CMD_PING +#define CONFIG_CMD_PORTIO +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_SAVES +#define CONFIG_CMD_SDRAM +#define CONFIG_CMD_SNTP + #undef CONFIG_CMD_XIMG #if !(CONFIG_LANTEC >= 2) diff --git a/include/configs/M5253EVBE.h b/include/configs/M5253EVBE.h index 48170e7a35..f5e1b646ca 100644 --- a/include/configs/M5253EVBE.h +++ b/include/configs/M5253EVBE.h @@ -146,7 +146,7 @@ * Please note that CFG_SDRAM_BASE _must_ start at 0 */ #define CFG_SDRAM_BASE 0x00000000 -#define CFG_SDRAM_SIZE 16 /* SDRAM size in MB */ +#define CFG_SDRAM_SIZE 8 /* SDRAM size in MB */ #ifdef CONFIG_MONITOR_IS_IN_RAM #define CFG_MONITOR_BASE 0x20000 diff --git a/include/configs/M5282EVB.h b/include/configs/M5282EVB.h index 3c17c1ea14..7bb9f60f76 100644 --- a/include/configs/M5282EVB.h +++ b/include/configs/M5282EVB.h @@ -163,7 +163,7 @@ * Please note that CFG_SDRAM_BASE _must_ start at 0 */ #define CFG_SDRAM_BASE 0x00000000 -#define CFG_SDRAM_SIZE 8 /* SDRAM size in MB */ +#define CFG_SDRAM_SIZE 16 /* SDRAM size in MB */ #define CFG_FLASH_BASE 0xffe00000 #define CFG_INT_FLASH_BASE 0xf0000000 #define CFG_INT_FLASH_ENABLE 0x21 diff --git a/include/configs/M5329EVB.h b/include/configs/M5329EVB.h index d3b160505b..47d74a3c37 100644 --- a/include/configs/M5329EVB.h +++ b/include/configs/M5329EVB.h @@ -175,7 +175,7 @@ * Please note that CFG_SDRAM_BASE _must_ start at 0 */ #define CFG_SDRAM_BASE 0x40000000 -#define CFG_SDRAM_SIZE 16 /* SDRAM size in MB */ +#define CFG_SDRAM_SIZE 32 /* SDRAM size in MB */ #define CFG_SDRAM_CFG1 0x53722730 #define CFG_SDRAM_CFG2 0x56670000 #define CFG_SDRAM_CTRL 0xE1092000 diff --git a/include/configs/M54455EVB.h b/include/configs/M54455EVB.h index 6f4859c238..db309584b9 100644 --- a/include/configs/M54455EVB.h +++ b/include/configs/M54455EVB.h @@ -27,8 +27,8 @@ * board/config.h - configuration options, board specific */ -#ifndef _JAMICA54455_H -#define _JAMICA54455_H +#ifndef _M54455EVB_H +#define _M54455EVB_H /* * High Level Configuration Options @@ -75,7 +75,7 @@ #define CONFIG_CMD_MISC #define CONFIG_CMD_MII #define CONFIG_CMD_NET -#define CONFIG_CMD_PCI +#undef CONFIG_CMD_PCI #define CONFIG_CMD_PING #define CONFIG_CMD_REGINFO @@ -129,8 +129,8 @@ "u-boot=u-boot.bin\0" \ "load=tftp ${loadaddr) ${u-boot}\0" \ "upd=run load; run prog\0" \ - "prog=prot off 0 2ffff;" \ - "era 0 2ffff;" \ + "prog=prot off 4000000 402ffff;" \ + "era 4000000 402ffff;" \ "cp.b ${loadaddr} 0 ${filesize};" \ "save\0" \ "" @@ -174,6 +174,7 @@ #define CFG_IMMR CFG_MBAR /* PCI */ +#ifdef CONFIG_CMD_PCI #define CONFIG_PCI 1 #define CFG_PCI_MEM_BUS 0xA0000000 @@ -187,6 +188,7 @@ #define CFG_PCI_CFG_BUS 0xB0000000 #define CFG_PCI_CFG_PHYS CFG_PCI_CFG_BUS #define CFG_PCI_CFG_SIZE 0x01000000 +#endif /* FPGA - Spartan 2 */ /* experiment @@ -268,8 +270,6 @@ /* Configuration for environment * Environment is embedded in u-boot in the second sector of the flash */ -#define CFG_ENV_OFFSET 0x4000 -#define CFG_ENV_SECT_SIZE 0x2000 #define CFG_ENV_IS_IN_FLASH 1 #define CONFIG_ENV_OVERWRITE 1 #undef CFG_ENV_IS_EMBEDDED @@ -278,13 +278,17 @@ * FLASH organization */ #ifdef CFG_ATMEL_BOOT -# define CFG_FLASH_BASE 0 +# define CFG_FLASH_BASE CFG_CS0_BASE # define CFG_FLASH0_BASE CFG_CS0_BASE # define CFG_FLASH1_BASE CFG_CS1_BASE +# define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x4000) +# define CFG_ENV_SECT_SIZE 0x2000 #else # define CFG_FLASH_BASE CFG_FLASH0_BASE # define CFG_FLASH0_BASE CFG_CS1_BASE # define CFG_FLASH1_BASE CFG_CS0_BASE +# define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x60000) +# define CFG_ENV_SECT_SIZE 0x20000 #endif /* M54455EVB has one non CFI flash, defined CFG_FLASH_CFI will cause the system @@ -328,9 +332,9 @@ * NOTE: Enable CONFIG_CMD_JFFS2 for JFFS2 support. */ #ifdef CFG_ATMEL_BOOT -# define CONFIG_JFFS2_DEV "nor0" +# define CONFIG_JFFS2_DEV "nor1" # define CONFIG_JFFS2_PART_SIZE 0x01000000 -# define CONFIG_JFFS2_PART_OFFSET CFG_FLASH1_BASE +# define CONFIG_JFFS2_PART_OFFSET (CFG_FLASH1_BASE + 0x500000) #else # define CONFIG_JFFS2_DEV "nor0" # define CONFIG_JFFS2_PART_SIZE (0x01000000 - 0x500000) @@ -356,20 +360,20 @@ #ifdef CFG_ATMEL_BOOT /* Atmel Flash */ -#define CFG_CS0_BASE 0 +#define CFG_CS0_BASE 0x04000000 #define CFG_CS0_MASK 0x00070001 #define CFG_CS0_CTRL 0x00001140 /* Intel Flash */ -#define CFG_CS1_BASE 0x04000000 +#define CFG_CS1_BASE 0x00000000 #define CFG_CS1_MASK 0x01FF0001 -#define CFG_CS1_CTRL 0x003F3D60 +#define CFG_CS1_CTRL 0x00000D60 #define CFG_ATMEL_BASE CFG_CS0_BASE #else /* Intel Flash */ -#define CFG_CS0_BASE 0 +#define CFG_CS0_BASE 0x00000000 #define CFG_CS0_MASK 0x01FF0001 -#define CFG_CS0_CTRL 0x003F3D60 +#define CFG_CS0_CTRL 0x00000D60 /* Atmel Flash */ #define CFG_CS1_BASE 0x04000000 #define CFG_CS1_MASK 0x00070001 @@ -388,4 +392,4 @@ #define CFG_CS3_MASK 0x00070001 #define CFG_CS3_CTRL 0x00000020 -#endif /* _JAMICA54455_H */ +#endif /* _M54455EVB_H */ diff --git a/include/configs/MPC8260ADS.h b/include/configs/MPC8260ADS.h index 713518d0da..23508f9f5a 100644 --- a/include/configs/MPC8260ADS.h +++ b/include/configs/MPC8260ADS.h @@ -209,35 +209,25 @@ /* * Command line configuration. */ -#include <config_cmd_all.h> - -#undef CONFIG_CMD_BEDBUG -#undef CONFIG_CMD_BMP -#undef CONFIG_CMD_BSP -#undef CONFIG_CMD_DATE -#undef CONFIG_CMD_DISPLAY -#undef CONFIG_CMD_DOC -#undef CONFIG_CMD_DTT -#undef CONFIG_CMD_EEPROM -#undef CONFIG_CMD_ELF -#undef CONFIG_CMD_EXT2 -#undef CONFIG_CMD_FAT -#undef CONFIG_CMD_FDC -#undef CONFIG_CMD_FDOS -#undef CONFIG_CMD_HWFLOW -#undef CONFIG_CMD_IDE -#undef CONFIG_CMD_KGDB -#undef CONFIG_CMD_MFSL -#undef CONFIG_CMD_MMC -#undef CONFIG_CMD_NAND -#undef CONFIG_CMD_PCMCIA -#undef CONFIG_CMD_REISER -#undef CONFIG_CMD_SCSI -#undef CONFIG_CMD_SPI -#undef CONFIG_CMD_SNTP -#undef CONFIG_CMD_UNIVERSE -#undef CONFIG_CMD_USB -#undef CONFIG_CMD_VFD +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_CDP +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DIAG +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IMMAP +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_JFFS2 +#define CONFIG_CMD_MII +#define CONFIG_CMD_PCI +#define CONFIG_CMD_PING +#define CONFIG_CMD_PORTIO +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_SAVES +#define CONFIG_CMD_SDRAM + #undef CONFIG_CMD_XIMG #if CONFIG_ADSTYPE == CFG_8272ADS diff --git a/include/configs/MPC8541CDS.h b/include/configs/MPC8541CDS.h index 4e061bd9ff..8dda6651ef 100644 --- a/include/configs/MPC8541CDS.h +++ b/include/configs/MPC8541CDS.h @@ -316,6 +316,7 @@ extern unsigned long get_clock_freq(void); #define OF_SOC "soc8541@e0000000" #define OF_TBCLK (bd->bi_busfreq / 8) #define OF_STDOUT_PATH "/soc8541@e0000000/serial@4600" +#define OF_PCI "pci@e0008000" /* * I2C diff --git a/include/configs/MPC8544DS.h b/include/configs/MPC8544DS.h index f580ccadee..13e2a2c079 100644 --- a/include/configs/MPC8544DS.h +++ b/include/configs/MPC8544DS.h @@ -198,6 +198,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define PIXIS_VSPEED1 0x18 /* VELA VSpeed 1 */ #define PIXIS_VCLKH 0x19 /* VELA VCLKH register */ #define PIXIS_VCLKL 0x1A /* VELA VCLKL register */ +#define CFG_PIXIS_VBOOT_MASK 0x40 /* Reset altbank mask*/ /* define to use L1 as initial stack */ diff --git a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h index 6083715189..4edc7fd2b6 100644 --- a/include/configs/MPC8548CDS.h +++ b/include/configs/MPC8548CDS.h @@ -340,6 +340,7 @@ extern unsigned long get_clock_freq(void); #define OF_SOC "soc8548@e0000000" #define OF_TBCLK (bd->bi_busfreq / 8) #define OF_STDOUT_PATH "/soc8548@e0000000/serial@4600" +#define OF_PCI "pci@e0008000" /* * I2C diff --git a/include/configs/MPC8555CDS.h b/include/configs/MPC8555CDS.h index 1d1b7c9079..c414bf033e 100644 --- a/include/configs/MPC8555CDS.h +++ b/include/configs/MPC8555CDS.h @@ -316,6 +316,7 @@ extern unsigned long get_clock_freq(void); #define OF_SOC "soc8555@e0000000" #define OF_TBCLK (bd->bi_busfreq / 8) #define OF_STDOUT_PATH "/soc8555@e0000000/serial@4600" +#define OF_PCI "pci@e0008000" /* * I2C diff --git a/include/configs/MPC8568MDS.h b/include/configs/MPC8568MDS.h index ba744e99f8..b9366cc994 100644 --- a/include/configs/MPC8568MDS.h +++ b/include/configs/MPC8568MDS.h @@ -297,7 +297,7 @@ extern unsigned long get_clock_freq(void); #define OF_SOC "soc8568@e0000000" #define OF_QE "qe@e0080000" #define OF_TBCLK (bd->bi_busfreq / 8) -#define OF_STDOUT_PATH "/soc8568@e0000000/serial@4600" +#define OF_STDOUT_PATH "/soc8568@e0000000/serial@4500" /* * I2C @@ -334,11 +334,6 @@ extern unsigned long get_clock_freq(void); #define CFG_SRIO_MEM_BASE 0xc0000000 -#if defined(CONFIG_PCI) - -#define CONFIG_NET_MULTI -#define CONFIG_PCI_PNP /* do pci plug-and-play */ - #ifdef CONFIG_QE /* * QE UEC ethernet configuration @@ -377,6 +372,11 @@ extern unsigned long get_clock_freq(void); #endif #endif /* CONFIG_QE */ +#if defined(CONFIG_PCI) + +#define CONFIG_NET_MULTI +#define CONFIG_PCI_PNP /* do pci plug-and-play */ + #undef CONFIG_EEPRO100 #undef CONFIG_TULIP diff --git a/include/configs/MPC8641HPCN.h b/include/configs/MPC8641HPCN.h index 7d8a380dc0..6f87240263 100644 --- a/include/configs/MPC8641HPCN.h +++ b/include/configs/MPC8641HPCN.h @@ -201,6 +201,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define PIXIS_VSPEED1 0x18 /* VELA VSpeed 1 */ #define PIXIS_VCLKH 0x19 /* VELA VCLKH register */ #define PIXIS_VCLKL 0x1A /* VELA VCLKL register */ +#define CFG_PIXIS_VBOOT_MASK 0x40 /* Reset altbank mask*/ #define CFG_MAX_FLASH_BANKS 2 /* number of banks */ #define CFG_MAX_FLASH_SECT 128 /* sectors per device */ @@ -346,6 +347,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CFG_USB_EVENT_POLL 1 #define CFG_USB_OHCI_SLOT_NAME "ohci_pci" #define CFG_USB_OHCI_MAX_ROOT_PORTS 15 +#define CFG_OHCI_SWAP_REG_ACCESS 1 #if !defined(CONFIG_PCI_PNP) #define PCI_ENET0_IOADDR 0xe0000000 @@ -544,6 +546,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_CMD_PCI #define CONFIG_CMD_SCSI #define CONFIG_CMD_EXT2 + #define CONFIG_CMD_USB #endif diff --git a/include/configs/RBC823.h b/include/configs/RBC823.h index 2f6de81551..fa32e33796 100644 --- a/include/configs/RBC823.h +++ b/include/configs/RBC823.h @@ -105,36 +105,31 @@ /* * Command line configuration. */ -#include <config_cmd_all.h> - -#undef CONFIG_CMD_BSP -#undef CONFIG_CMD_DATE -#undef CONFIG_CMD_DISPLAY -#undef CONFIG_CMD_DTT -#undef CONFIG_CMD_EXT2 -#undef CONFIG_CMD_FDC -#undef CONFIG_CMD_FDOS -#undef CONFIG_CMD_HWFLOW -#undef CONFIG_CMD_IDE -#undef CONFIG_CMD_IRQ -#undef CONFIG_CMD_JFFS2 -#undef CONFIG_CMD_MII -#undef CONFIG_CMD_MFSL -#undef CONFIG_CMD_MMC -#undef CONFIG_CMD_NAND -#undef CONFIG_CMD_PCI -#undef CONFIG_CMD_PCMCIA -#undef CONFIG_CMD_REISER -#undef CONFIG_CMD_SCSI +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_BEDBUG +#define CONFIG_CMD_BMP +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_CDP +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DIAG +#define CONFIG_CMD_DOC +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_ELF +#define CONFIG_CMD_FAT +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IMMAP +#define CONFIG_CMD_KGDB +#define CONFIG_CMD_PING +#define CONFIG_CMD_PORTIO +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_SAVES +#define CONFIG_CMD_SDRAM + #undef CONFIG_CMD_SETGETDCR -#undef CONFIG_CMD_SNTP -#undef CONFIG_CMD_SPI -#undef CONFIG_CMD_UNIVERSE -#undef CONFIG_CMD_USB -#undef CONFIG_CMD_VFD #undef CONFIG_CMD_XIMG - /* * Miscellaneous configurable options */ diff --git a/include/configs/ads5121.h b/include/configs/ads5121.h index bb1efdf6de..58060a8c8a 100644 --- a/include/configs/ads5121.h +++ b/include/configs/ads5121.h @@ -231,7 +231,7 @@ #define CFG_I2C_SPEED 100000 /* I2C speed and slave address */ #define CFG_I2C_SLAVE 0x7F #if 0 -#define CFG_I2C_NOPROBES {{0,0x69}} * Don't probe these addrs */ +#define CFG_I2C_NOPROBES {{0,0x69}} /* Don't probe these addrs */ #endif /* diff --git a/include/configs/atstk1002.h b/include/configs/atstk1002.h index 1809fc5d86..b33e26fe01 100644 --- a/include/configs/atstk1002.h +++ b/include/configs/atstk1002.h @@ -114,15 +114,10 @@ #define CONFIG_AUTOBOOT_STOP_STR " " /* - * These are "locally administered ethernet addresses" generated by - * ./tools/gen_eth_addr - * - * After booting the board for the first time, new addresses should be - * generated and assigned to the environment variables "ethaddr" and - * "eth1addr". + * After booting the board for the first time, new ethernet addresses + * should be generated and assigned to the environment variables + * "ethaddr" and "eth1addr". This is normally done during production. */ -#define CONFIG_ETHADDR 6a:87:71:14:cd:cb -#define CONFIG_ETH1ADDR ca:f8:15:e6:3e:e6 #define CONFIG_OVERWRITE_ETHADDR_ONCE 1 #define CONFIG_NET_MULTI 1 diff --git a/include/configs/ep8260.h b/include/configs/ep8260.h index 025c24960d..490db5fefd 100644 --- a/include/configs/ep8260.h +++ b/include/configs/ep8260.h @@ -303,38 +303,29 @@ /* * Command line configuration. */ -#include <config_cmd_all.h> +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_BEDBUG +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_CDP +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DIAG +#define CONFIG_CMD_ELF +#define CONFIG_CMD_FAT +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IMMAP +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_PING +#define CONFIG_CMD_PORTIO +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_SAVES +#define CONFIG_CMD_SDRAM +#define CONFIG_CMD_SNTP -#undef CONFIG_CMD_BMP -#undef CONFIG_CMD_BSP #undef CONFIG_CMD_DCR -#undef CONFIG_CMD_DHCP -#undef CONFIG_CMD_DISPLAY -#undef CONFIG_CMD_DOC -#undef CONFIG_CMD_DTT -#undef CONFIG_CMD_EEPROM -#undef CONFIG_CMD_EXT2 -#undef CONFIG_CMD_FDC -#undef CONFIG_CMD_FDOS -#undef CONFIG_CMD_HWFLOW -#undef CONFIG_CMD_IDE -#undef CONFIG_CMD_JFFS2 -#undef CONFIG_CMD_KGDB -#undef CONFIG_CMD_MII -#undef CONFIG_CMD_MFSL -#undef CONFIG_CMD_MMC -#undef CONFIG_CMD_NAND -#undef CONFIG_CMD_PCI -#undef CONFIG_CMD_PCMCIA -#undef CONFIG_CMD_REISER -#undef CONFIG_CMD_SCSI -#undef CONFIG_CMD_SPI -#undef CONFIG_CMD_UNIVERSE -#undef CONFIG_CMD_USB -#undef CONFIG_CMD_VFD #undef CONFIG_CMD_XIMG - /* Where do the internal registers live? */ #define CFG_IMMR 0xF0000000 #define CFG_DEFAULT_IMMR 0x00010000 diff --git a/include/configs/hymod.h b/include/configs/hymod.h index 2547afb3cf..01e7970162 100644 --- a/include/configs/hymod.h +++ b/include/configs/hymod.h @@ -185,33 +185,34 @@ /* * Command line configuration. */ -#include <config_cmd_all.h> - -#undef CONFIG_CMD_BEDBUG -#undef CONFIG_CMD_BMP -#undef CONFIG_CMD_DISPLAY -#undef CONFIG_CMD_DOC -#undef CONFIG_CMD_EXT2 -#undef CONFIG_CMD_FDC -#undef CONFIG_CMD_FDOS +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_BSP +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_CDP +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DIAG +#define CONFIG_CMD_DTT +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_ELF +#define CONFIG_CMD_FAT +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IMMAP +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_KGDB +#define CONFIG_CMD_MII +#define CONFIG_CMD_PING +#define CONFIG_CMD_PORTIO +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_SAVES +#define CONFIG_CMD_SDRAM +#define CONFIG_CMD_SNTP + #undef CONFIG_CMD_FPGA -#undef CONFIG_CMD_HWFLOW -#undef CONFIG_CMD_IDE -#undef CONFIG_CMD_JFFS2 -#undef CONFIG_CMD_NAND -#undef CONFIG_CMD_MFSL -#undef CONFIG_CMD_MMC -#undef CONFIG_CMD_PCMCIA -#undef CONFIG_CMD_PCI -#undef CONFIG_CMD_USB -#undef CONFIG_CMD_REISER -#undef CONFIG_CMD_SCSI -#undef CONFIG_CMD_SPI -#undef CONFIG_CMD_UNIVERSE -#undef CONFIG_CMD_VFD #undef CONFIG_CMD_XIMG - #ifdef DEBUG #define CONFIG_BOOTDELAY -1 /* autoboot disabled */ #else diff --git a/include/configs/rsdproto.h b/include/configs/rsdproto.h index 814082ccc6..40a05fa5e8 100644 --- a/include/configs/rsdproto.h +++ b/include/configs/rsdproto.h @@ -92,8 +92,8 @@ /* enable I2C */ #define CONFIG_HARD_I2C 1 /* I2C with hardware support */ -#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ -#define CFG_I2C_SLAVE 0x7F +#define CFG_I2C_SPEED 50000 /* I2C speed and slave address */ +#define CFG_I2C_SLAVE 0x30 /* system clock rate (CLKIN) - equal to the 60x and local bus speed */ diff --git a/include/configs/sbc2410x.h b/include/configs/sbc2410x.h index b4a063a1d4..9b05bd6c8c 100644 --- a/include/configs/sbc2410x.h +++ b/include/configs/sbc2410x.h @@ -103,7 +103,6 @@ #define CONFIG_CMD_DHCP #define CONFIG_CMD_ELF #define CONFIG_CMD_PING -#define CONFIG_CMD_REGINFO #define CONFIG_BOOTDELAY 3 diff --git a/include/configs/smdk2410.h b/include/configs/smdk2410.h index ca404ff452..18a036c2b6 100644 --- a/include/configs/smdk2410.h +++ b/include/configs/smdk2410.h @@ -88,7 +88,6 @@ #include <config_cmd_default.h> #define CONFIG_CMD_CACHE -#define CONFIG_CMD_REGINFO #define CONFIG_CMD_DATE #define CONFIG_CMD_ELF diff --git a/include/configs/uc101.h b/include/configs/uc101.h index aed80ec1e5..81df1419f5 100644 --- a/include/configs/uc101.h +++ b/include/configs/uc101.h @@ -297,7 +297,7 @@ /* 8Mbit SRAM @0x80100000 */ #define CFG_CS1_START CFG_SRAM_BASE -#define CFG_CS1_SIZE 0x00100000 +#define CFG_CS1_SIZE 0x00200000 #define CFG_CS1_CFG 0x21D00 /* Display H1, Status Inputs, EPLD @0x80600000 8 Bit */ diff --git a/include/fdt.h b/include/fdt.h index 3dd3aca3b6..48ccfd9100 100644 --- a/include/fdt.h +++ b/include/fdt.h @@ -1,22 +1,3 @@ -/* - * libfdt - Flat Device Tree manipulation - * Copyright (C) 2006 David Gibson, IBM Corporation. - * - * This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU Lesser General Public License - * as published by the Free Software Foundation; either version 2.1 of - * the License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * Lesser General Public License for more details. - * - * You should have received a copy of the GNU Lesser General Public - * License along with this library; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - #ifndef _FDT_H #define _FDT_H diff --git a/include/fdt_support.h b/include/fdt_support.h index 60fa423b33..8f781d4405 100644 --- a/include/fdt_support.h +++ b/include/fdt_support.h @@ -29,6 +29,22 @@ #include <fdt.h> int fdt_chosen(void *fdt, ulong initrd_start, ulong initrd_end, int force); +void do_fixup_by_path(void *fdt, const char *path, const char *prop, + const void *val, int len, int create); +void do_fixup_by_path_u32(void *fdt, const char *path, const char *prop, + u32 val, int create); +void do_fixup_by_prop(void *fdt, + const char *pname, const void *pval, int plen, + const char *prop, const void *val, int len, + int create); +void do_fixup_by_prop_u32(void *fdt, + const char *pname, const void *pval, int plen, + const char *prop, u32 val, int create); +void do_fixup_by_compat(void *fdt, const char *compat, + const char *prop, const void *val, int len, int create); +void do_fixup_by_compat_u32(void *fdt, const char *compat, + const char *prop, u32 val, int create); +void fdt_fixup_ethernet(void *fdt, bd_t *bd); #ifdef CONFIG_OF_HAS_UBOOT_ENV int fdt_env(void *fdt); diff --git a/include/libfdt.h b/include/libfdt.h index 38c65a9899..6b2fb92ea3 100644 --- a/include/libfdt.h +++ b/include/libfdt.h @@ -1,154 +1,721 @@ +#ifndef _LIBFDT_H +#define _LIBFDT_H /* * libfdt - Flat Device Tree manipulation * Copyright (C) 2006 David Gibson, IBM Corporation. * - * This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU Lesser General Public License - * as published by the Free Software Foundation; either version 2.1 of - * the License, or (at your option) any later version. + * libfdt is dual licensed: you can use it either under the terms of + * the GPL, or the BSD license, at your option. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this library; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Alternatively, + * + * b) Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: * - * This library is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * Lesser General Public License for more details. + * 1. Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * 2. Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. * - * You should have received a copy of the GNU Lesser General Public - * License along with this library; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND + * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, + * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR + * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR + * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, + * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ -#ifndef _LIBFDT_H -#define _LIBFDT_H - -#include <fdt.h> #include <libfdt_env.h> +#include <fdt.h> #define FDT_FIRST_SUPPORTED_VERSION 0x10 #define FDT_LAST_SUPPORTED_VERSION 0x11 /* Error codes: informative error codes */ #define FDT_ERR_NOTFOUND 1 + /* FDT_ERR_NOTFOUND: The requested node or property does not exist */ #define FDT_ERR_EXISTS 2 + /* FDT_ERR_EXISTS: Attemped to create a node or property which + * already exists */ #define FDT_ERR_NOSPACE 3 + /* FDT_ERR_NOSPACE: Operation needed to expand the device + * tree, but its buffer did not have sufficient space to + * contain the expanded tree. Use fdt_open_into() to move the + * device tree to a buffer with more space. */ /* Error codes: codes for bad parameters */ #define FDT_ERR_BADOFFSET 4 + /* FDT_ERR_BADOFFSET: Function was passed a structure block + * offset which is out-of-bounds, or which points to an + * unsuitable part of the structure for the operation. */ #define FDT_ERR_BADPATH 5 -#define FDT_ERR_BADSTATE 6 + /* FDT_ERR_BADPATH: Function was passed a badly formatted path + * (e.g. missing a leading / for a function which requires an + * absolute path) */ +#define FDT_ERR_BADPHANDLE 6 + /* FDT_ERR_BADPHANDLE: Function was passed an invalid phandle + * value. phandle values of 0 and -1 are not permitted. */ +#define FDT_ERR_BADSTATE 7 + /* FDT_ERR_BADSTATE: Function was passed an incomplete device + * tree created by the sequential-write functions, which is + * not sufficiently complete for the requested operation. */ /* Error codes: codes for bad device tree blobs */ -#define FDT_ERR_TRUNCATED 7 -#define FDT_ERR_BADMAGIC 8 -#define FDT_ERR_BADVERSION 9 -#define FDT_ERR_BADSTRUCTURE 10 -#define FDT_ERR_BADLAYOUT 11 +#define FDT_ERR_TRUNCATED 8 + /* FDT_ERR_TRUNCATED: Structure block of the given device tree + * ends without an FDT_END tag. */ +#define FDT_ERR_BADMAGIC 9 + /* FDT_ERR_BADMAGIC: Given "device tree" appears not to be a + * device tree at all - it is missing the flattened device + * tree magic number. */ +#define FDT_ERR_BADVERSION 10 + /* FDT_ERR_BADVERSION: Given device tree has a version which + * can't be handled by the requested operation. For + * read-write functions, this may mean that fdt_open_into() is + * required to convert the tree to the expected version. */ +#define FDT_ERR_BADSTRUCTURE 11 + /* FDT_ERR_BADSTRUCTURE: Given device tree has a corrupt + * structure block or other serious error (e.g. misnested + * nodes, or subnodes preceding properties). */ +#define FDT_ERR_BADLAYOUT 12 + /* FDT_ERR_BADLAYOUT: For read-write functions, the given + * device tree has it's sub-blocks in an order that the + * function can't handle (memory reserve map, then structure, + * then strings). Use fdt_open_into() to reorganize the tree + * into a form suitable for the read-write operations. */ + +/* "Can't happen" error indicating a bug in libfdt */ +#define FDT_ERR_INTERNAL 13 + /* FDT_ERR_INTERNAL: libfdt has failed an internal assertion. + * Should never be returned, if it is, it indicates a bug in + * libfdt itself. */ -#define FDT_ERR_MAX 11 +#define FDT_ERR_MAX 13 + +/**********************************************************************/ +/* Low-level functions (you probably don't need these) */ +/**********************************************************************/ + +const void *fdt_offset_ptr(const void *fdt, int offset, int checklen); +static inline void *fdt_offset_ptr_w(void *fdt, int offset, int checklen) +{ + return (void *)fdt_offset_ptr(fdt, offset, checklen); +} + +uint32_t fdt_next_tag(const void *fdt, int offset, int *nextoffset); + +/**********************************************************************/ +/* General functions */ +/**********************************************************************/ #define fdt_get_header(fdt, field) \ - (fdt32_to_cpu(((struct fdt_header *)(fdt))->field)) -#define fdt_magic(fdt) (fdt_get_header(fdt, magic)) + (fdt32_to_cpu(((const struct fdt_header *)(fdt))->field)) +#define fdt_magic(fdt) (fdt_get_header(fdt, magic)) #define fdt_totalsize(fdt) (fdt_get_header(fdt, totalsize)) #define fdt_off_dt_struct(fdt) (fdt_get_header(fdt, off_dt_struct)) #define fdt_off_dt_strings(fdt) (fdt_get_header(fdt, off_dt_strings)) #define fdt_off_mem_rsvmap(fdt) (fdt_get_header(fdt, off_mem_rsvmap)) #define fdt_version(fdt) (fdt_get_header(fdt, version)) -#define fdt_last_comp_version(fdt) (fdt_get_header(fdt, last_comp_version)) -#define fdt_boot_cpuid_phys(fdt) (fdt_get_header(fdt, boot_cpuid_phys)) -#define fdt_size_dt_strings(fdt) (fdt_get_header(fdt, size_dt_strings)) +#define fdt_last_comp_version(fdt) (fdt_get_header(fdt, last_comp_version)) +#define fdt_boot_cpuid_phys(fdt) (fdt_get_header(fdt, boot_cpuid_phys)) +#define fdt_size_dt_strings(fdt) (fdt_get_header(fdt, size_dt_strings)) #define fdt_size_dt_struct(fdt) (fdt_get_header(fdt, size_dt_struct)) -#define fdt_set_header(fdt, field, val) \ - ((struct fdt_header *)(fdt))->field = cpu_to_fdt32(val) +#define __fdt_set_hdr(name) \ + static inline void fdt_set_##name(void *fdt, uint32_t val) \ + { \ + struct fdt_header *fdth = fdt; \ + fdth->name = cpu_to_fdt32(val); \ + } +__fdt_set_hdr(magic); +__fdt_set_hdr(totalsize); +__fdt_set_hdr(off_dt_struct); +__fdt_set_hdr(off_dt_strings); +__fdt_set_hdr(off_mem_rsvmap); +__fdt_set_hdr(version); +__fdt_set_hdr(last_comp_version); +__fdt_set_hdr(boot_cpuid_phys); +__fdt_set_hdr(size_dt_strings); +__fdt_set_hdr(size_dt_struct); +#undef __fdt_set_hdr +/** + * fdt_check_header - sanity check a device tree or possible device tree + * @fdt: pointer to data which might be a flattened device tree + * + * fdt_check_header() checks that the given buffer contains what + * appears to be a flattened device tree with sane information in its + * header. + * + * returns: + * 0, if the buffer appears to contain a valid device tree + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, standard meanings, as above + */ int fdt_check_header(const void *fdt); -void *fdt_offset_ptr(const void *fdt, int offset, int checklen); +/** + * fdt_move - move a device tree around in memory + * @fdt: pointer to the device tree to move + * @buf: pointer to memory where the device is to be moved + * @bufsize: size of the memory space at buf + * + * fdt_move() relocates, if possible, the device tree blob located at + * fdt to the buffer at buf of size bufsize. The buffer may overlap + * with the existing device tree blob at fdt. Therefore, + * fdt_move(fdt, fdt, fdt_totalsize(fdt)) + * should always succeed. + * + * returns: + * 0, on success + * -FDT_ERR_NOSPACE, bufsize is insufficient to contain the device tree + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, standard meanings + */ +int fdt_move(const void *fdt, void *buf, int bufsize); -#define fdt_offset_ptr_typed(fdt, offset, var) \ - ((typeof(var))(fdt_offset_ptr((fdt), (offset), sizeof(*(var))))) +/**********************************************************************/ +/* Read-only functions */ +/**********************************************************************/ -int fdt_move(const void *fdt, void *buf, int bufsize); +/** + * fdt_string - retreive a string from the strings block of a device tree + * @fdt: pointer to the device tree blob + * @stroffset: offset of the string within the strings block (native endian) + * + * fdt_string() retrieves a pointer to a single string from the + * strings block of the device tree blob at fdt. + * + * returns: + * a pointer to the string, on success + * NULL, if stroffset is out of bounds + */ +const char *fdt_string(const void *fdt, int stroffset); -/* Read-only functions */ -char *fdt_string(const void *fdt, int stroffset); +/** + * fdt_num_mem_rsv - retreive the number of memory reserve map entries + * @fdt: pointer to the device tree blob + * + * Returns the number of entries in the device tree blob's memory + * reservation map. This does not include the terminating 0,0 entry + * or any other (0,0) entries reserved for expansion. + * + * returns: + * the number of entries + */ +int fdt_num_mem_rsv(const void *fdt); +/** + * fdt_get_mem_rsv - retreive one memory reserve map entry + * @fdt: pointer to the device tree blob + * @address, @size: pointers to 64-bit variables + * + * On success, *address and *size will contain the address and size of + * the n-th reserve map entry from the device tree blob, in + * native-endian format. + * + * returns: + * 0, on success + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, standard meanings + */ +int fdt_get_mem_rsv(const void *fdt, int n, uint64_t *address, uint64_t *size); + +/** + * fdt_subnode_offset_namelen - find a subnode based on substring + * @fdt: pointer to the device tree blob + * @parentoffset: structure block offset of a node + * @name: name of the subnode to locate + * @namelen: number of characters of name to consider + * + * Identical to fdt_subnode_offset(), but only examine the first + * namelen characters of name for matching the subnode name. This is + * useful for finding subnodes based on a portion of a larger string, + * such as a full path. + */ int fdt_subnode_offset_namelen(const void *fdt, int parentoffset, const char *name, int namelen); +/** + * fdt_subnode_offset - find a subnode of a given node + * @fdt: pointer to the device tree blob + * @parentoffset: structure block offset of a node + * @name: name of the subnode to locate + * + * fdt_subnode_offset() finds a subnode of the node at structure block + * offset parentoffset with the given name. name may include a unit + * address, in which case fdt_subnode_offset() will find the subnode + * with that unit address, or the unit address may be omitted, in + * which case fdt_subnode_offset() will find an arbitrary subnode + * whose name excluding unit address matches the given name. + * + * returns: + * structure block offset of the requested subnode (>=0), on success + * -FDT_ERR_NOTFOUND, if the requested subnode does not exist + * -FDT_ERR_BADOFFSET, if parentoffset did not point to an FDT_BEGIN_NODE tag + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_TRUNCATED, standard meanings. + */ int fdt_subnode_offset(const void *fdt, int parentoffset, const char *name); -int fdt_find_node_by_path(const void *fdt, const char *path); -int fdt_find_node_by_type(const void *fdt, int nodeoffset, const char *type); +/** + * fdt_path_offset - find a tree node by its full path + * @fdt: pointer to the device tree blob + * @path: full path of the node to locate + * + * fdt_path_offset() finds a node of a given path in the device tree. + * Each path component may omit the unit address portion, but the + * results of this are undefined if any such path component is + * ambiguous (that is if there are multiple nodes at the relevant + * level matching the given component, differentiated only by unit + * address). + * + * returns: + * structure block offset of the node with the requested path (>=0), on success + * -FDT_ERR_BADPATH, given path does not begin with '/' or is invalid + * -FDT_ERR_NOTFOUND, if the requested node does not exist + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_TRUNCATED, standard meanings. + */ +int fdt_path_offset(const void *fdt, const char *path); -int fdt_node_is_compatible(const void *fdt, int nodeoffset, - const char *compat); -int fdt_find_compatible_node(const void *fdt, int nodeoffset, - const char *type, const char *compat); +/** + * fdt_get_name - retreive the name of a given node + * @fdt: pointer to the device tree blob + * @nodeoffset: structure block offset of the starting node + * @lenp: pointer to an integer variable (will be overwritten) or NULL + * + * fdt_get_name() retrieves the name (including unit address) of the + * device tree node at structure block offset nodeoffset. If lenp is + * non-NULL, the length of this name is also returned, in the integer + * pointed to by lenp. + * + * returns: + * pointer to the node's name, on success + * If lenp is non-NULL, *lenp contains the length of that name (>=0) + * NULL, on error + * if lenp is non-NULL *lenp contains an error code (<0): + * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, standard meanings + */ +const char *fdt_get_name(const void *fdt, int nodeoffset, int *lenp); -struct fdt_property *fdt_get_property(const void *fdt, int nodeoffset, - const char *name, int *lenp); -void *fdt_getprop(const void *fdt, int nodeoffset, - const char *name, int *lenp); +/** + * fdt_get_property - find a given property in a given node + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node whose property to find + * @name: name of the property to find + * @lenp: pointer to an integer variable (will be overwritten) or NULL + * + * fdt_get_property() retrieves a pointer to the fdt_property + * structure within the device tree blob corresponding to the property + * named 'name' of the node at offset nodeoffset. If lenp is + * non-NULL, the length of the property value also returned, in the + * integer pointed to by lenp. + * + * returns: + * pointer to the structure representing the property + * if lenp is non-NULL, *lenp contains the length of the property + * value (>=0) + * NULL, on error + * if lenp is non-NULL, *lenp contains an error code (<0): + * -FDT_ERR_NOTFOUND, node does not have named property + * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_TRUNCATED, standard meanings + */ +const struct fdt_property *fdt_get_property(const void *fdt, int nodeoffset, + const char *name, int *lenp); +static inline struct fdt_property *fdt_get_property_w(void *fdt, int nodeoffset, + const char *name, + int *lenp) +{ + return (struct fdt_property *)fdt_get_property(fdt, nodeoffset, + name, lenp); +} -uint32_t fdt_next_tag(const void *fdt, int offset, - int *nextoffset, char **namep); -int fdt_num_reservemap(void *fdt, int *used, int *total); -int fdt_get_reservemap(void *fdt, int n, struct fdt_reserve_entry *re); +/** + * fdt_getprop - retrieve the value of a given property + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node whose property to find + * @name: name of the property to find + * @lenp: pointer to an integer variable (will be overwritten) or NULL + * + * fdt_getprop() retrieves a pointer to the value of the property + * named 'name' of the node at offset nodeoffset (this will be a + * pointer to within the device blob itself, not a copy of the value). + * If lenp is non-NULL, the length of the property value also + * returned, in the integer pointed to by lenp. + * + * returns: + * pointer to the property's value + * if lenp is non-NULL, *lenp contains the length of the property + * value (>=0) + * NULL, on error + * if lenp is non-NULL, *lenp contains an error code (<0): + * -FDT_ERR_NOTFOUND, node does not have named property + * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_TRUNCATED, standard meanings + */ +const void *fdt_getprop(const void *fdt, int nodeoffset, + const char *name, int *lenp); +static inline void *fdt_getprop_w(void *fdt, int nodeoffset, + const char *name, int *lenp) +{ + return (void *)fdt_getprop(fdt, nodeoffset, name, lenp); +} + +/** + * fdt_get_phandle - retreive the phandle of a given node + * @fdt: pointer to the device tree blob + * @nodeoffset: structure block offset of the node + * + * fdt_get_phandle() retrieves the phandle of the device tree node at + * structure block offset nodeoffset. + * + * returns: + * the phandle of the node at nodeoffset, on succes (!= 0, != -1) + * 0, if the node has no phandle, or another error occurs + */ +uint32_t fdt_get_phandle(const void *fdt, int nodeoffset); + +/** + * fdt_get_path - determine the full path of a node + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node whose path to find + * @buf: character buffer to contain the returned path (will be overwritten) + * @buflen: size of the character buffer at buf + * + * fdt_get_path() computes the full path of the node at offset + * nodeoffset, and records that path in the buffer at buf. + * + * NOTE: This function is expensive, as it must scan the device tree + * structure from the start to nodeoffset. + * + * returns: + * 0, on success + * buf contains the absolute path of the node at + * nodeoffset, as a NUL-terminated string. + * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag + * -FDT_ERR_NOSPACE, the path of the given node is longer than (bufsize-1) + * characters and will not fit in the given buffer. + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, standard meanings + */ +int fdt_get_path(const void *fdt, int nodeoffset, char *buf, int buflen); + +/** + * fdt_supernode_atdepth_offset - find a specific ancestor of a node + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node whose parent to find + * @supernodedepth: depth of the ancestor to find + * @nodedepth: pointer to an integer variable (will be overwritten) or NULL + * + * fdt_supernode_atdepth_offset() finds an ancestor of the given node + * at a specific depth from the root (where the root itself has depth + * 0, its immediate subnodes depth 1 and so forth). So + * fdt_supernode_atdepth_offset(fdt, nodeoffset, 0, NULL); + * will always return 0, the offset of the root node. If the node at + * nodeoffset has depth D, then: + * fdt_supernode_atdepth_offset(fdt, nodeoffset, D, NULL); + * will return nodeoffset itself. + * + * NOTE: This function is expensive, as it must scan the device tree + * structure from the start to nodeoffset. + * + * returns: + + * structure block offset of the node at node offset's ancestor + * of depth supernodedepth (>=0), on success + * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag +* -FDT_ERR_NOTFOUND, supernodedepth was greater than the depth of nodeoffset + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, standard meanings + */ +int fdt_supernode_atdepth_offset(const void *fdt, int nodeoffset, + int supernodedepth, int *nodedepth); + +/** + * fdt_node_depth - find the depth of a given node + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node whose parent to find + * + * fdt_node_depth() finds the depth of a given node. The root node + * has depth 0, its immediate subnodes depth 1 and so forth. + * + * NOTE: This function is expensive, as it must scan the device tree + * structure from the start to nodeoffset. + * + * returns: + * depth of the node at nodeoffset (>=0), on success + * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, standard meanings + */ +int fdt_node_depth(const void *fdt, int nodeoffset); + +/** + * fdt_parent_offset - find the parent of a given node + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node whose parent to find + * + * fdt_parent_offset() locates the parent node of a given node (that + * is, it finds the offset of the node which contains the node at + * nodeoffset as a subnode). + * + * NOTE: This function is expensive, as it must scan the device tree + * structure from the start to nodeoffset, *twice*. + * + * returns: + * stucture block offset of the parent of the node at nodeoffset + * (>=0), on success + * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, standard meanings + */ +int fdt_parent_offset(const void *fdt, int nodeoffset); + +/** + * fdt_node_offset_by_prop_value - find nodes with a given property value + * @fdt: pointer to the device tree blob + * @startoffset: only find nodes after this offset + * @propname: property name to check + * @propval: property value to search for + * @proplen: length of the value in propval + * + * fdt_node_offset_by_prop_value() returns the offset of the first + * node after startoffset, which has a property named propname whose + * value is of length proplen and has value equal to propval; or if + * startoffset is -1, the very first such node in the tree. + * + * To iterate through all nodes matching the criterion, the following + * idiom can be used: + * offset = fdt_node_offset_by_prop_value(fdt, -1, propname, + * propval, proplen); + * while (offset != -FDT_ERR_NOTFOUND) { + * // other code here + * offset = fdt_node_offset_by_prop_value(fdt, offset, propname, + * propval, proplen); + * } + * + * Note the -1 in the first call to the function, if 0 is used here + * instead, the function will never locate the root node, even if it + * matches the criterion. + * + * returns: + * structure block offset of the located node (>= 0, >startoffset), + * on success + * -FDT_ERR_NOTFOUND, no node matching the criterion exists in the + * tree after startoffset + * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, standard meanings + */ +int fdt_node_offset_by_prop_value(const void *fdt, int startoffset, + const char *propname, + const void *propval, int proplen); + +/** + * fdt_node_offset_by_phandle - find the node with a given phandle + * @fdt: pointer to the device tree blob + * @phandle: phandle value + * + * fdt_node_offset_by_prop_value() returns the offset of the node + * which has the given phandle value. If there is more than one node + * in the tree with the given phandle (an invalid tree), results are + * undefined. + * + * returns: + * structure block offset of the located node (>= 0), on success + * -FDT_ERR_NOTFOUND, no node with that phandle exists + * -FDT_ERR_BADPHANDLE, given phandle value was invalid (0 or -1) + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, standard meanings + */ +int fdt_node_offset_by_phandle(const void *fdt, uint32_t phandle); + +/** + * fdt_node_check_compatible: check a node's compatible property + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of a tree node + * @compatible: string to match against + * + * + * fdt_node_check_compatible() returns 0 if the given node contains a + * 'compatible' property with the given string as one of its elements, + * it returns non-zero otherwise, or on error. + * + * returns: + * 0, if the node has a 'compatible' property listing the given string + * 1, if the node has a 'compatible' property, but it does not list + * the given string + * -FDT_ERR_NOTFOUND, if the given node has no 'compatible' property + * -FDT_ERR_BADOFFSET, if nodeoffset does not refer to a BEGIN_NODE tag + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, standard meanings + */ +int fdt_node_check_compatible(const void *fdt, int nodeoffset, + const char *compatible); + +/** + * fdt_node_offset_by_compatible - find nodes with a given 'compatible' value + * @fdt: pointer to the device tree blob + * @startoffset: only find nodes after this offset + * @compatible: 'compatible' string to match against + * + * fdt_node_offset_by_compatible() returns the offset of the first + * node after startoffset, which has a 'compatible' property which + * lists the given compatible string; or if startoffset is -1, the + * very first such node in the tree. + * + * To iterate through all nodes matching the criterion, the following + * idiom can be used: + * offset = fdt_node_offset_by_compatible(fdt, -1, compatible); + * while (offset != -FDT_ERR_NOTFOUND) { + * // other code here + * offset = fdt_node_offset_by_compatible(fdt, offset, compatible); + * } + * + * Note the -1 in the first call to the function, if 0 is used here + * instead, the function will never locate the root node, even if it + * matches the criterion. + * + * returns: + * structure block offset of the located node (>= 0, >startoffset), + * on success + * -FDT_ERR_NOTFOUND, no node matching the criterion exists in the + * tree after startoffset + * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, standard meanings + */ +int fdt_node_offset_by_compatible(const void *fdt, int startoffset, + const char *compatible); + +/**********************************************************************/ +/* Write-in-place functions */ +/**********************************************************************/ -/* Write-in-place functions */ int fdt_setprop_inplace(void *fdt, int nodeoffset, const char *name, const void *val, int len); - -#define fdt_setprop_inplace_typed(fdt, nodeoffset, name, val) \ - ({ \ - typeof(val) x = val; \ - fdt_setprop_inplace(fdt, nodeoffset, name, &x, sizeof(x)); \ - }) +static inline int fdt_setprop_inplace_cell(void *fdt, int nodeoffset, + const char *name, uint32_t val) +{ + val = cpu_to_fdt32(val); + return fdt_setprop_inplace(fdt, nodeoffset, name, &val, sizeof(val)); +} int fdt_nop_property(void *fdt, int nodeoffset, const char *name); int fdt_nop_node(void *fdt, int nodeoffset); -int fdt_insert_reservemap_entry(void *fdt, int n, uint64_t addr, uint64_t size); +/**********************************************************************/ +/* Sequential write functions */ +/**********************************************************************/ -/* Sequential-write functions */ int fdt_create(void *buf, int bufsize); int fdt_add_reservemap_entry(void *fdt, uint64_t addr, uint64_t size); int fdt_finish_reservemap(void *fdt); int fdt_begin_node(void *fdt, const char *name); int fdt_property(void *fdt, const char *name, const void *val, int len); -#define fdt_property_typed(fdt, name, val) \ - ({ \ - typeof(val) x = (val); \ - fdt_property((fdt), (name), &x, sizeof(x)); \ - }) +static inline int fdt_property_cell(void *fdt, const char *name, uint32_t val) +{ + val = cpu_to_fdt32(val); + return fdt_property(fdt, name, &val, sizeof(val)); +} #define fdt_property_string(fdt, name, str) \ fdt_property(fdt, name, str, strlen(str)+1) int fdt_end_node(void *fdt); int fdt_finish(void *fdt); -int fdt_replace_reservemap_entry(void *fdt, int n, uint64_t addr, uint64_t size); -/* Read-write functions */ -int fdt_open_into(void *fdt, void *buf, int bufsize); +/**********************************************************************/ +/* Read-write functions */ +/**********************************************************************/ + +int fdt_open_into(const void *fdt, void *buf, int bufsize); int fdt_pack(void *fdt); +int fdt_add_mem_rsv(void *fdt, uint64_t address, uint64_t size); +int fdt_del_mem_rsv(void *fdt, int n); + int fdt_setprop(void *fdt, int nodeoffset, const char *name, const void *val, int len); -#define fdt_setprop_typed(fdt, nodeoffset, name, val) \ - ({ \ - typeof(val) x = (val); \ - fdt_setprop((fdt), (nodeoffset), (name), &x, sizeof(x)); \ - }) +static inline int fdt_setprop_cell(void *fdt, int nodeoffset, const char *name, + uint32_t val) +{ + val = cpu_to_fdt32(val); + return fdt_setprop(fdt, nodeoffset, name, &val, sizeof(val)); +} #define fdt_setprop_string(fdt, nodeoffset, name, str) \ fdt_setprop((fdt), (nodeoffset), (name), (str), strlen(str)+1) -int fdt_find_and_setprop(void *fdt, const char *node, const char *prop, - const void *val, int len, int create); int fdt_delprop(void *fdt, int nodeoffset, const char *name); int fdt_add_subnode_namelen(void *fdt, int parentoffset, const char *name, int namelen); int fdt_add_subnode(void *fdt, int parentoffset, const char *name); int fdt_del_node(void *fdt, int nodeoffset); -/* Extra functions */ +/**********************************************************************/ +/* Debugging / informational functions */ +/**********************************************************************/ + const char *fdt_strerror(int errval); #endif /* _LIBFDT_H */ diff --git a/include/miiphy.h b/include/miiphy.h index 71716b04d4..5518a0a89c 100644 --- a/include/miiphy.h +++ b/include/miiphy.h @@ -26,56 +26,49 @@ | | Author: Mark Wisner | -| Change Activity- -| -| Date Description of Change BY -| --------- --------------------- --- -| 04-May-99 Created MKW -| 07-Jul-99 Added full duplex support MKW -| 08-Sep-01 Tweaks gvb -| +----------------------------------------------------------------------------*/ #ifndef _miiphy_h_ #define _miiphy_h_ #include <net.h> -int miiphy_read(char *devname, unsigned char addr, unsigned char reg, - unsigned short *value); -int miiphy_write(char *devname, unsigned char addr, unsigned char reg, - unsigned short value); -int miiphy_info(char *devname, unsigned char addr, unsigned int *oui, - unsigned char *model, unsigned char *rev); -int miiphy_reset(char *devname, unsigned char addr); -int miiphy_speed(char *devname, unsigned char addr); -int miiphy_duplex(char *devname, unsigned char addr); +int miiphy_read (char *devname, unsigned char addr, unsigned char reg, + unsigned short *value); +int miiphy_write (char *devname, unsigned char addr, unsigned char reg, + unsigned short value); +int miiphy_info (char *devname, unsigned char addr, unsigned int *oui, + unsigned char *model, unsigned char *rev); +int miiphy_reset (char *devname, unsigned char addr); +int miiphy_speed (char *devname, unsigned char addr); +int miiphy_duplex (char *devname, unsigned char addr); +int miiphy_is_1000base_x (char *devname, unsigned char addr); #ifdef CFG_FAULT_ECHO_LINK_DOWN -int miiphy_link(char *devname, unsigned char addr); +int miiphy_link (char *devname, unsigned char addr); #endif -void miiphy_init(void); +void miiphy_init (void); -void miiphy_register(char *devname, - int (* read)(char *devname, unsigned char addr, - unsigned char reg, unsigned short *value), - int (* write)(char *devname, unsigned char addr, - unsigned char reg, unsigned short value)); +void miiphy_register (char *devname, + int (*read) (char *devname, unsigned char addr, + unsigned char reg, unsigned short *value), + int (*write) (char *devname, unsigned char addr, + unsigned char reg, unsigned short value)); -int miiphy_set_current_dev(char *devname); -char *miiphy_get_current_dev(void); +int miiphy_set_current_dev (char *devname); +char *miiphy_get_current_dev (void); -void miiphy_listdev(void); +void miiphy_listdev (void); #define BB_MII_DEVNAME "bbmii" int bb_miiphy_read (char *devname, unsigned char addr, - unsigned char reg, unsigned short *value); + unsigned char reg, unsigned short *value); int bb_miiphy_write (char *devname, unsigned char addr, - unsigned char reg, unsigned short value); + unsigned char reg, unsigned short value); /* phy seed setup */ #define AUTO 99 -#define _1000BASET 1000 +#define _1000BASET 1000 #define _100BASET 100 #define _10BASET 10 #define HALF 22 @@ -90,9 +83,10 @@ int bb_miiphy_write (char *devname, unsigned char addr, #define PHY_ANLPAR 0x05 #define PHY_ANER 0x06 #define PHY_ANNPTR 0x07 -#define PHY_ANLPNP 0x08 -#define PHY_1000BTCR 0x09 -#define PHY_1000BTSR 0x0A +#define PHY_ANLPNP 0x08 +#define PHY_1000BTCR 0x09 +#define PHY_1000BTSR 0x0A +#define PHY_EXSR 0x0F #define PHY_PHYSTS 0x10 #define PHY_MIPSCR 0x11 #define PHY_MIPGSR 0x12 @@ -115,10 +109,10 @@ int bb_miiphy_write (char *devname, unsigned char addr, #define PHY_BMCR_DPLX 0x0100 #define PHY_BMCR_COL_TST 0x0080 -#define PHY_BMCR_SPEED_MASK 0x2040 -#define PHY_BMCR_1000_MBPS 0x0040 -#define PHY_BMCR_100_MBPS 0x2000 -#define PHY_BMCR_10_MBPS 0x0000 +#define PHY_BMCR_SPEED_MASK 0x2040 +#define PHY_BMCR_1000_MBPS 0x0040 +#define PHY_BMCR_100_MBPS 0x2000 +#define PHY_BMCR_10_MBPS 0x0000 /* phy BMSR */ #define PHY_BMSR_100T4 0x8000 @@ -126,6 +120,7 @@ int bb_miiphy_write (char *devname, unsigned char addr, #define PHY_BMSR_100TXH 0x2000 #define PHY_BMSR_10TF 0x1000 #define PHY_BMSR_10TH 0x0800 +#define PHY_BMSR_EXT_STAT 0x0100 #define PHY_BMSR_PRE_SUP 0x0040 #define PHY_BMSR_AUTN_COMP 0x0020 #define PHY_BMSR_RF 0x0010 @@ -138,23 +133,42 @@ int bb_miiphy_write (char *devname, unsigned char addr, #define PHY_ANLPAR_NP 0x8000 #define PHY_ANLPAR_ACK 0x4000 #define PHY_ANLPAR_RF 0x2000 +#define PHY_ANLPAR_ASYMP 0x0800 +#define PHY_ANLPAR_PAUSE 0x0400 #define PHY_ANLPAR_T4 0x0200 #define PHY_ANLPAR_TXFD 0x0100 #define PHY_ANLPAR_TX 0x0080 #define PHY_ANLPAR_10FD 0x0040 #define PHY_ANLPAR_10 0x0020 -#define PHY_ANLPAR_100 0x0380 /* we can run at 100 */ - -#define PHY_ANLPAR_PSB_MASK 0x001f -#define PHY_ANLPAR_PSB_802_3 0x0001 -#define PHY_ANLPAR_PSB_802_9 0x0002 - -/* PHY_1000BTSR */ -#define PHY_1000BTSR_MSCF 0x8000 -#define PHY_1000BTSR_MSCR 0x4000 -#define PHY_1000BTSR_LRS 0x2000 -#define PHY_1000BTSR_RRS 0x1000 -#define PHY_1000BTSR_1000FD 0x0800 -#define PHY_1000BTSR_1000HD 0x0400 +#define PHY_ANLPAR_100 0x0380 /* we can run at 100 */ +/* phy ANLPAR 1000BASE-X */ +#define PHY_X_ANLPAR_NP 0x8000 +#define PHY_X_ANLPAR_ACK 0x4000 +#define PHY_X_ANLPAR_RF_MASK 0x3000 +#define PHY_X_ANLPAR_PAUSE_MASK 0x0180 +#define PHY_X_ANLPAR_HD 0x0040 +#define PHY_X_ANLPAR_FD 0x0020 + +#define PHY_ANLPAR_PSB_MASK 0x001f +#define PHY_ANLPAR_PSB_802_3 0x0001 +#define PHY_ANLPAR_PSB_802_9 0x0002 + +/* phy 1000BTCR */ +#define PHY_1000BTCR_1000FD 0x0200 +#define PHY_1000BTCR_1000HD 0x0100 + +/* phy 1000BTSR */ +#define PHY_1000BTSR_MSCF 0x8000 +#define PHY_1000BTSR_MSCR 0x4000 +#define PHY_1000BTSR_LRS 0x2000 +#define PHY_1000BTSR_RRS 0x1000 +#define PHY_1000BTSR_1000FD 0x0800 +#define PHY_1000BTSR_1000HD 0x0400 + +/* phy EXSR */ +#define PHY_EXSR_1000XF 0x8000 +#define PHY_EXSR_1000XH 0x4000 +#define PHY_EXSR_1000TF 0x2000 +#define PHY_EXSR_1000TH 0x1000 #endif |