diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/configs/uniphier.h | 104 |
1 files changed, 67 insertions, 37 deletions
diff --git a/include/configs/uniphier.h b/include/configs/uniphier.h index c991b2dbdd..62c3daff14 100644 --- a/include/configs/uniphier.h +++ b/include/configs/uniphier.h @@ -15,6 +15,10 @@ #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 +#ifdef CONFIG_ARM64 +#define CONFIG_CMD_UNZIP +#endif + /*----------------------------------------------------------------------- * MMU and Cache Setting *----------------------------------------------------------------------*/ @@ -76,7 +80,7 @@ /* #define CONFIG_ENV_IS_NOWHERE */ /* #define CONFIG_ENV_IS_IN_NAND */ #define CONFIG_ENV_IS_IN_MMC -#define CONFIG_ENV_OFFSET 0x80000 +#define CONFIG_ENV_OFFSET 0x100000 #define CONFIG_ENV_SIZE 0x2000 /* #define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) */ @@ -98,7 +102,6 @@ #define CONFIG_SYS_TIMER_RATE 1000000 #endif - #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_SYS_NAND_MAX_CHIPS 2 #define CONFIG_SYS_NAND_ONFI_DETECTION @@ -143,6 +146,17 @@ #define CONFIG_CMDLINE_EDITING /* add command line history */ +#if defined(CONFIG_ARM64) && !defined(CONFIG_ARMV8_MULTIENTRY) +/* ARM Trusted Firmware */ +#define BOOT_IMAGES \ + "second_image=bl1.bin\0" \ + "third_image=fip.bin\0" +#else +#define BOOT_IMAGES \ + "second_image=u-boot-spl.bin\0" \ + "third_image=u-boot.bin\0" +#endif + #define CONFIG_BOOTCOMMAND "run $bootmode" #define CONFIG_ROOTPATH "/nfs/root/path" @@ -167,46 +181,54 @@ "__nfsboot=run tftpboot\0" #else #ifdef CONFIG_ARM64 -#define CONFIG_BOOTFILE "Image" +#define CONFIG_BOOTFILE "Image.gz" #define LINUXBOOT_CMD "booti" +#define KERNEL_ADDR_LOAD "kernel_addr_load=0x84200000\0" #define KERNEL_ADDR_R "kernel_addr_r=0x80080000\0" -#define KERNEL_SIZE "kernel_size=0x00c00000\0" -#define RAMDISK_ADDR "ramdisk_addr=0x00e00000\0" #else #define CONFIG_BOOTFILE "zImage" #define LINUXBOOT_CMD "bootz" +#define KERNEL_ADDR_LOAD "kernel_addr_load=0x80208000\0" #define KERNEL_ADDR_R "kernel_addr_r=0x80208000\0" -#define KERNEL_SIZE "kernel_size=0x00800000\0" -#define RAMDISK_ADDR "ramdisk_addr=0x00a00000\0" #endif #define LINUXBOOT_ENV_SETTINGS \ "fdt_addr=0x00100000\0" \ "fdt_addr_r=0x84100000\0" \ "fdt_size=0x00008000\0" \ "kernel_addr=0x00200000\0" \ + KERNEL_ADDR_LOAD \ KERNEL_ADDR_R \ - KERNEL_SIZE \ - RAMDISK_ADDR \ + "kernel_size=0x00800000\0" \ + "ramdisk_addr=0x00a00000\0" \ "ramdisk_addr_r=0x84a00000\0" \ "ramdisk_size=0x00600000\0" \ "ramdisk_file=rootfs.cpio.uboot\0" \ - "boot_common=setexpr bootm_low $kernel_addr_r '&' fe000000 &&" \ + "boot_common=setexpr bootm_low $kernel_addr_r '&' fe000000 && " \ + "if test $kernel_addr_load = $kernel_addr_r; then " \ + "true; " \ + "else " \ + "unzip $kernel_addr_load $kernel_addr_r; " \ + "fi && " \ LINUXBOOT_CMD " $kernel_addr_r $ramdisk_addr_r $fdt_addr_r\0" \ - "norboot=setexpr kernel_addr $nor_base + $kernel_addr &&" \ - "setexpr kernel_size $kernel_size / 4 &&" \ - "cp $kernel_addr $kernel_addr_r $kernel_size &&" \ - "setexpr ramdisk_addr_r $nor_base + $ramdisk_addr &&" \ - "setexpr fdt_addr_r $nor_base + $fdt_addr &&" \ + "norboot=setexpr kernel_addr_nor $nor_base + $kernel_addr && " \ + "setexpr kernel_size_div4 $kernel_size / 4 && " \ + "cp $kernel_addr_nor $kernel_addr_load $kernel_size_div4 && " \ + "setexpr ramdisk_addr_nor $nor_base + $ramdisk_addr && " \ + "setexpr ramdisk_size_div4 $ramdisk_size / 4 && " \ + "cp $ramdisk_addr_nor $ramdisk_addr_r $ramdisk_size_div4 && " \ + "setexpr fdt_addr_nor $nor_base + $fdt_addr && " \ + "setexpr fdt_size_div4 $fdt_size / 4 && " \ + "cp $fdt_addr_nor $fdt_addr_r $fdt_size_div4 && " \ "run boot_common\0" \ - "nandboot=nand read $kernel_addr_r $kernel_addr $kernel_size &&" \ + "nandboot=nand read $kernel_addr_load $kernel_addr $kernel_size && " \ "nand read $ramdisk_addr_r $ramdisk_addr $ramdisk_size &&" \ "nand read $fdt_addr_r $fdt_addr $fdt_size &&" \ "run boot_common\0" \ - "tftpboot=tftpboot $kernel_addr_r $bootfile &&" \ + "tftpboot=tftpboot $kernel_addr_load $bootfile && " \ "tftpboot $ramdisk_addr_r $ramdisk_file &&" \ "tftpboot $fdt_addr_r $fdt_file &&" \ "run boot_common\0" \ - "__nfsboot=tftpboot $kernel_addr_r $bootfile &&" \ + "__nfsboot=tftpboot $kernel_addr_load $bootfile && " \ "tftpboot $fdt_addr_r $fdt_file &&" \ "setenv ramdisk_addr_r - &&" \ "run boot_common\0" @@ -215,31 +237,38 @@ #define CONFIG_EXTRA_ENV_SETTINGS \ "netdev=eth0\0" \ "verify=n\0" \ + "initrd_high=0xffffffffffffffff\0" \ "nor_base=0x42000000\0" \ "sramupdate=setexpr tmp_addr $nor_base + 0x50000 &&" \ - "tftpboot $tmp_addr u-boot-spl.bin &&" \ - "setexpr tmp_addr $nor_base + 0x60000 &&" \ - "tftpboot $tmp_addr u-boot.bin\0" \ + "tftpboot $tmp_addr $second_image && " \ + "setexpr tmp_addr $nor_base + 0x70000 && " \ + "tftpboot $tmp_addr $third_image\0" \ "emmcupdate=mmcsetn &&" \ "mmc partconf $mmc_first_dev 0 1 1 &&" \ - "tftpboot u-boot-spl.bin &&" \ - "mmc write $loadaddr 0 80 &&" \ - "tftpboot u-boot.bin &&" \ - "mmc write $loadaddr 80 780\0" \ + "tftpboot $second_image && " \ + "mmc write $loadaddr 0 100 && " \ + "tftpboot $third_image && " \ + "mmc write $loadaddr 100 700\0" \ "nandupdate=nand erase 0 0x00100000 &&" \ - "tftpboot u-boot-spl.bin &&" \ - "nand write $loadaddr 0 0x00010000 &&" \ - "tftpboot u-boot.bin &&" \ - "nand write $loadaddr 0x00010000 0x000f0000\0" \ + "tftpboot $second_image && " \ + "nand write $loadaddr 0 0x00020000 && " \ + "tftpboot $third_image && " \ + "nand write $loadaddr 0x00020000 0x000e0000\0" \ + BOOT_IMAGES \ LINUXBOOT_ENV_SETTINGS #define CONFIG_SYS_BOOTMAPSZ 0x20000000 #define CONFIG_SYS_SDRAM_BASE 0x80000000 -#define CONFIG_NR_DRAM_BANKS 2 +#define CONFIG_NR_DRAM_BANKS 3 /* for LD20; the last 64 byte is used for dynamic DDR PHY training */ #define CONFIG_SYS_MEM_TOP_HIDE 64 +#define CONFIG_PANIC_HANG + +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE) + +/* only for SPL */ #if defined(CONFIG_ARM64) #define CONFIG_SPL_TEXT_BASE 0x30000000 #elif defined(CONFIG_ARCH_UNIPHIER_SLD3) || \ @@ -257,9 +286,6 @@ #else #define CONFIG_SPL_STACK (0x00100000) #endif -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE) - -#define CONFIG_PANIC_HANG #define CONFIG_SPL_FRAMEWORK #ifdef CONFIG_ARM64 @@ -268,21 +294,25 @@ #define CONFIG_SPL_BOARD_INIT -#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x10000 +#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x20000 /* subtract sizeof(struct image_header) */ -#define CONFIG_SYS_UBOOT_BASE (0x60000 - 0x40) +#define CONFIG_SYS_UBOOT_BASE (0x70000 - 0x40) -#ifdef CONFIG_SPL #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" #define CONFIG_SPL_MAX_FOOTPRINT 0x10000 +#if defined(CONFIG_ARCH_UNIPHIER_LD20) +#define CONFIG_SPL_MAX_SIZE 0x14000 +#else #define CONFIG_SPL_MAX_SIZE 0x10000 +#endif #if defined(CONFIG_ARCH_UNIPHIER_LD11) #define CONFIG_SPL_BSS_START_ADDR 0x30012000 #elif defined(CONFIG_ARCH_UNIPHIER_LD20) #define CONFIG_SPL_BSS_START_ADDR 0x30016000 #endif #define CONFIG_SPL_BSS_MAX_SIZE 0x2000 -#endif + +#define CONFIG_SPL_PAD_TO 0x20000 #endif /* __CONFIG_UNIPHIER_COMMON_H__ */ |