diff options
Diffstat (limited to 'include')
-rw-r--r-- | include/asm-sparc/io.h | 1 | ||||
-rw-r--r-- | include/asm-sparc/types.h | 3 | ||||
-rw-r--r-- | include/common.h | 15 | ||||
-rw-r--r-- | include/configs/MPC8260ADS.h | 7 | ||||
-rw-r--r-- | include/configs/MigoR.h | 4 | ||||
-rw-r--r-- | include/configs/atngw100.h | 1 | ||||
-rw-r--r-- | include/configs/atstk1002.h | 1 | ||||
-rw-r--r-- | include/configs/atstk1003.h | 1 | ||||
-rw-r--r-- | include/configs/atstk1004.h | 1 | ||||
-rw-r--r-- | include/configs/atstk1006.h | 1 | ||||
-rw-r--r-- | include/configs/davinci_sffsdr.h | 69 | ||||
-rw-r--r-- | include/configs/ms7722se.h | 4 | ||||
-rw-r--r-- | include/configs/r2dplus.h | 42 | ||||
-rw-r--r-- | include/configs/r7780mp.h | 41 | ||||
-rw-r--r-- | include/configs/sh7763rdp.h | 10 | ||||
-rw-r--r-- | include/environment.h | 7 | ||||
-rw-r--r-- | include/linux/mtd/mtd.h | 4 | ||||
-rw-r--r-- | include/lmb.h | 2 | ||||
-rw-r--r-- | include/lxt971a.h | 100 | ||||
-rw-r--r-- | include/nand.h | 5 | ||||
-rw-r--r-- | include/ns7520_eth.h | 1 | ||||
-rw-r--r-- | include/ns9750_eth.h | 1 | ||||
-rw-r--r-- | include/pci_ids.h | 1 |
23 files changed, 93 insertions, 229 deletions
diff --git a/include/asm-sparc/io.h b/include/asm-sparc/io.h index 2a27d06798..ede0b1a8db 100644 --- a/include/asm-sparc/io.h +++ b/include/asm-sparc/io.h @@ -70,7 +70,6 @@ * that can be used to access the memory range with the caching * properties specified by "flags". */ -typedef unsigned long phys_addr_t; #define MAP_NOCACHE (0) #define MAP_WRCOMBINE (0) diff --git a/include/asm-sparc/types.h b/include/asm-sparc/types.h index 69f93d60b8..2cf974a7a9 100644 --- a/include/asm-sparc/types.h +++ b/include/asm-sparc/types.h @@ -65,6 +65,9 @@ typedef unsigned long long u64; /* DMA addresses are 32-bits wide */ typedef u32 dma_addr_t; +typedef unsigned long phys_addr_t; +typedef unsigned long phys_size_t; + #endif /* __KERNEL__ */ #endif /* __ASSEMBLY__ */ diff --git a/include/common.h b/include/common.h index 10b997e9ec..2fcb1fd379 100644 --- a/include/common.h +++ b/include/common.h @@ -607,8 +607,10 @@ ulong simple_strtoul(const char *cp,char **endp,unsigned int base); unsigned long long simple_strtoull(const char *cp,char **endp,unsigned int base); #endif long simple_strtol(const char *cp,char **endp,unsigned int base); -void panic(const char *fmt, ...); -int sprintf(char * buf, const char *fmt, ...); +void panic(const char *fmt, ...) + __attribute__ ((format (__printf__, 1, 2))); +int sprintf(char * buf, const char *fmt, ...) + __attribute__ ((format (__printf__, 2, 3))); int vsprintf(char *buf, const char *fmt, va_list args); /* lib_generic/crc32.c */ @@ -630,7 +632,8 @@ int disable_ctrlc (int); /* 1 to disable, 0 to enable Control-C detect */ */ /* serial stuff */ -void serial_printf (const char *fmt, ...); +void serial_printf (const char *fmt, ...) + __attribute__ ((format (__printf__, 1, 2))); /* stdin */ int getc(void); @@ -639,7 +642,8 @@ int tstc(void); /* stdout */ void putc(const char c); void puts(const char *s); -void printf(const char *fmt, ...); +void printf(const char *fmt, ...) + __attribute__ ((format (__printf__, 1, 2))); void vprintf(const char *fmt, va_list args); /* stderr */ @@ -656,7 +660,8 @@ void vprintf(const char *fmt, va_list args); #define stderr 2 #define MAX_FILES 3 -void fprintf(int file, const char *fmt, ...); +void fprintf(int file, const char *fmt, ...) + __attribute__ ((format (__printf__, 2, 3))); void fputs(int file, const char *s); void fputc(int file, const char c); int ftstc(int file); diff --git a/include/configs/MPC8260ADS.h b/include/configs/MPC8260ADS.h index 23508f9f5a..59d0bdbeb2 100644 --- a/include/configs/MPC8260ADS.h +++ b/include/configs/MPC8260ADS.h @@ -197,6 +197,13 @@ #define CONFIG_BAUDRATE 115200 +#define CONFIG_OF_LIBFDT 1 +#define CONFIG_OF_BOARD_SETUP 1 +#if defined(CONFIG_OF_LIBFDT) +#define OF_CPU "cpu@0" +#define OF_TBCLK (bd->bi_busfreq / 4) +#endif + /* * BOOTP options */ diff --git a/include/configs/MigoR.h b/include/configs/MigoR.h index 99e1179e68..fa0e5db021 100644 --- a/include/configs/MigoR.h +++ b/include/configs/MigoR.h @@ -45,10 +45,6 @@ #define CONFIG_BAUDRATE 115200 #define CONFIG_BOOTDELAY 3 #define CONFIG_BOOTARGS "console=ttySC0,115200 root=1f01" -#define CONFIG_NETMASK 255.255.255.0 -#define CONFIG_IPADDR 192.168.10.100 -#define CONFIG_SERVERIP 192.168.10.77 -#define CONFIG_GATEWAYIP 192.168.10.77 #define CONFIG_VERSION_VARIABLE #undef CONFIG_SHOW_BOOT_PROGRESS diff --git a/include/configs/atngw100.h b/include/configs/atngw100.h index 7ac51b543c..84d235ea9d 100644 --- a/include/configs/atngw100.h +++ b/include/configs/atngw100.h @@ -128,6 +128,7 @@ #define CFG_NR_PIOS 5 #define CFG_HSDRAMC 1 #define CONFIG_MMC 1 +#define CONFIG_ATMEL_MCI 1 #define CONFIG_ATMEL_SPI 1 #define CONFIG_SPI_FLASH 1 diff --git a/include/configs/atstk1002.h b/include/configs/atstk1002.h index ba18eb63c7..90910bb98a 100644 --- a/include/configs/atstk1002.h +++ b/include/configs/atstk1002.h @@ -153,6 +153,7 @@ #define CFG_NR_PIOS 5 #define CFG_HSDRAMC 1 #define CONFIG_MMC 1 +#define CONFIG_ATMEL_MCI 1 #define CFG_DCACHE_LINESZ 32 #define CFG_ICACHE_LINESZ 32 diff --git a/include/configs/atstk1003.h b/include/configs/atstk1003.h index a528ddfb0e..03472a8869 100644 --- a/include/configs/atstk1003.h +++ b/include/configs/atstk1003.h @@ -136,6 +136,7 @@ #define CONFIG_PIO2 1 #define CFG_HSDRAMC 1 #define CONFIG_MMC 1 +#define CONFIG_ATMEL_MCI 1 #define CFG_DCACHE_LINESZ 32 #define CFG_ICACHE_LINESZ 32 diff --git a/include/configs/atstk1004.h b/include/configs/atstk1004.h index fc9585e84d..07add821a9 100644 --- a/include/configs/atstk1004.h +++ b/include/configs/atstk1004.h @@ -136,6 +136,7 @@ #define CONFIG_PIO2 1 #define CFG_HSDRAMC 1 #define CONFIG_MMC 1 +#define CONFIG_ATMEL_MCI 1 #define CFG_DCACHE_LINESZ 32 #define CFG_ICACHE_LINESZ 32 diff --git a/include/configs/atstk1006.h b/include/configs/atstk1006.h index 9fd49a53a3..f9af67540a 100644 --- a/include/configs/atstk1006.h +++ b/include/configs/atstk1006.h @@ -153,6 +153,7 @@ #define CFG_NR_PIOS 5 #define CFG_HSDRAMC 1 #define CONFIG_MMC 1 +#define CONFIG_ATMEL_MCI 1 #define CFG_DCACHE_LINESZ 32 #define CFG_ICACHE_LINESZ 32 diff --git a/include/configs/davinci_sffsdr.h b/include/configs/davinci_sffsdr.h index 41a6763e8f..0e49e6c159 100644 --- a/include/configs/davinci_sffsdr.h +++ b/include/configs/davinci_sffsdr.h @@ -1,6 +1,9 @@ /* * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net> * + * Copyright (C) 2008 Lyrtech <www.lyrtech.com> + * Copyright (C) 2008 Philip Balister, OpenSDR <philip@opensdr.com> + * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of @@ -21,30 +24,24 @@ #define __CONFIG_H #include <asm/sizes.h> -/*=======*/ /* Board */ -/*=======*/ #define SFFSDR #define CFG_NAND_LARGEPAGE #define CFG_USE_NAND -/*===================*/ +#define CFG_USE_DSPLINK /* This is to prevent U-Boot from + * powering ON the DSP. */ /* SoC Configuration */ -/*===================*/ #define CONFIG_ARM926EJS /* arm926ejs CPU core */ #define CONFIG_SYS_CLK_FREQ 297000000 /* Arm Clock frequency */ #define CFG_TIMERBASE 0x01c21400 /* use timer 0 */ #define CFG_HZ_CLOCK 27000000 /* Timer Input clock freq */ #define CFG_HZ 1000 -/*==================================================*/ -/* EEPROM definitions for Atmel 24LC64 EEPROM chip */ -/*==================================================*/ +/* EEPROM definitions for Atmel 24LC64 EEPROM chip */ #define CFG_I2C_EEPROM_ADDR_LEN 2 #define CFG_I2C_EEPROM_ADDR 0x50 #define CFG_EEPROM_PAGE_WRITE_BITS 5 #define CFG_EEPROM_PAGE_WRITE_DELAY_MS 20 -/*=============*/ /* Memory Info */ -/*=============*/ #define CFG_MALLOC_LEN (0x10000 + 256*1024) /* malloc() len */ #define CFG_GBL_DATA_SIZE 128 /* reserved for initial data */ #define CFG_MEMTEST_START 0x80000000 /* memtest start address */ @@ -54,9 +51,7 @@ #define PHYS_SDRAM_1 0x80000000 /* DDR Start */ #define PHYS_SDRAM_1_SIZE 0x08000000 /* DDR size 128MB */ #define DDR_4BANKS /* 4-bank DDR2 (128MB) */ -/*====================*/ /* Serial Driver info */ -/*====================*/ #define CFG_NS16550 #define CFG_NS16550_SERIAL #define CFG_NS16550_REG_SIZE 4 /* NS16550 register size */ @@ -65,16 +60,12 @@ #define CONFIG_CONS_INDEX 1 /* use UART0 for console */ #define CONFIG_BAUDRATE 115200 /* Default baud rate */ #define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } -/*===================*/ /* I2C Configuration */ -/*===================*/ #define CONFIG_HARD_I2C #define CONFIG_DRIVER_DAVINCI_I2C #define CFG_I2C_SPEED 80000 /* 100Kbps won't work, silicon bug */ #define CFG_I2C_SLAVE 10 /* Bogus, master-only in U-Boot */ -/*==================================*/ /* Network & Ethernet Configuration */ -/*==================================*/ #define CONFIG_DRIVER_TI_EMAC #define CONFIG_MII #define CONFIG_BOOTP_DEFAULT @@ -83,9 +74,7 @@ #define CONFIG_BOOTP_SEND_HOSTNAME #define CONFIG_NET_RETRY_COUNT 10 #define CONFIG_OVERWRITE_ETHADDR_ONCE -/*=====================*/ /* Flash & Environment */ -/*=====================*/ #undef CFG_ENV_IS_IN_FLASH #define CFG_NO_FLASH #define CFG_ENV_IS_IN_NAND /* U-Boot env in NAND Flash */ @@ -98,28 +87,19 @@ #define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ #define NAND_MAX_CHIPS 1 #define CFG_ENV_OFFSET 0x0 /* Block 0--not used by bootcode */ -/*=====================*/ -/* Board related stuff */ -/*=====================*/ -/*==========================================*/ -/* I2C switch definitions for PCA9543 chip */ -/* on Lyrtech SFF SDR board. */ -/* This chip has a single register. */ -/*==========================================*/ +/* I2C switch definitions for PCA9543 chip */ #define CFG_I2C_PCA9543_ADDR 0x70 -#define CFG_I2C_PCA9543_ADDR_LEN 0 +#define CFG_I2C_PCA9543_ADDR_LEN 0 /* Single register. */ #define CFG_I2C_PCA9543_ENABLE_CH0 0x01 /* Enable channel 0. */ -/*==============================*/ /* U-Boot general configuration */ -/*==============================*/ -#undef CONFIG_USE_IRQ /* No IRQ/FIQ in U-Boot */ +#undef CONFIG_USE_IRQ /* No IRQ/FIQ in U-Boot */ #define CONFIG_MISC_INIT_R -#undef CONFIG_BOOTDELAY +#define CONFIG_BOOTDELAY 5 /* Autoboot after 5 seconds. */ #define CONFIG_BOOTFILE "uImage" /* Boot file name */ #define CFG_PROMPT "U-Boot > " /* Monitor Command Prompt */ #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ -/* Print buffer size */ -#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16) +#define CFG_PBSIZE \ + (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16) /* Print buffer size */ #define CFG_MAXARGS 16 /* max number of command args */ #define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ #define CFG_LOAD_ADDR 0x80700000 /* Default Linux kernel @@ -133,25 +113,20 @@ #define CFG_LONGHELP #define CONFIG_CRC32_VERIFY #define CONFIG_MX_CYCLIC -/* - * Define this to load an Integrity kernel. - * -#define CONFIG_CMD_ELF - */ - -/*===================*/ /* Linux Information */ -/*===================*/ #define LINUX_BOOT_PARAM_ADDR 0x80000100 #define CONFIG_CMDLINE_TAG #define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_BOOTARGS \ - "mem=56M console=ttyS0,115200n8 root=/dev/hda1 rw noinitrd ip=dhcp" -#define CONFIG_BOOTCOMMAND "setenv setboot setenv bootargs \\$(bootargs) video=dm64xxfb:output=\\$(videostd);run setboot" - -/*=================*/ +#define CONFIG_BOOTARGS \ + "mem=56M " \ + "console=ttyS0,115200n8 " \ + "root=/dev/nfs rw noinitrd ip=dhcp " \ + "nfsroot=${serverip}:/nfsroot/sffsdr " \ + "eth0=${ethaddr}" +#define CONFIG_BOOTCOMMAND \ + "nand read 87A00000 100000 300000;" \ + "bootelf 87A00000" /* U-Boot commands */ -/*=================*/ #include <config_cmd_default.h> #define CONFIG_CMD_ASKENV #define CONFIG_CMD_DHCP @@ -167,9 +142,7 @@ #undef CONFIG_CMD_SETGETDCR #undef CONFIG_CMD_FLASH #undef CONFIG_CMD_IMLS -/*=======================*/ /* KGDB support (if any) */ -/*=======================*/ #ifdef CONFIG_CMD_KGDB #define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */ diff --git a/include/configs/ms7722se.h b/include/configs/ms7722se.h index 8d92a13e1c..7298e55c70 100644 --- a/include/configs/ms7722se.h +++ b/include/configs/ms7722se.h @@ -40,10 +40,6 @@ #define CONFIG_BAUDRATE 115200 #define CONFIG_BOOTDELAY 3 #define CONFIG_BOOTARGS "console=ttySC0,115200 root=1f01" -#define CONFIG_NETMASK 255.255.255.0 -#define CONFIG_IPADDR 192.168.0.22 -#define CONFIG_SERVERIP 192.168.0.1 -#define CONFIG_GATEWAYIP 192.168.0.1 #define CONFIG_VERSION_VARIABLE #undef CONFIG_SHOW_BOOT_PROGRESS diff --git a/include/configs/r2dplus.h b/include/configs/r2dplus.h index c20bacad22..e269336e82 100644 --- a/include/configs/r2dplus.h +++ b/include/configs/r2dplus.h @@ -35,12 +35,6 @@ #define CONFIG_BOOTARGS "console=ttySC0,115200" #define CONFIG_ENV_OVERWRITE 1 -/* Network setting */ -#define CONFIG_NETMASK 255.0.0.0 -#define CONFIG_IPADDR 10.0.192.51 -#define CONFIG_SERVERIP 10.0.0.1 -#define CONFIG_GATEWAYIP 10.0.0.1 - /* SDRAM */ #define CFG_SDRAM_BASE (0x8C000000) #define CFG_SDRAM_SIZE (0x04000000) @@ -60,45 +54,27 @@ #define CFG_LOAD_ADDR (CFG_SDRAM_BASE + 32 * 1024 * 1024) /* Address of u-boot image in Flash */ #define CFG_MONITOR_BASE (CFG_FLASH_BASE) -#define CFG_MONITOR_LEN (128 * 1024) +#define CFG_MONITOR_LEN (256 * 1024) /* Size of DRAM reserved for malloc() use */ -#define CFG_MALLOC_LEN (256 * 1024) +#define CFG_MALLOC_LEN (1024 * 1024) /* size in bytes reserved for initial data */ #define CFG_GBL_DATA_SIZE (256) #define CFG_BOOTMAPSZ (8 * 1024 * 1024) /* - * NOR Flash + * NOR Flash ( Spantion S29GL256P ) */ #define CFG_FLASH_CFI #define CFG_FLASH_CFI_DRIVER - -#if defined(CONFIG_R2DPLUS_OLD) -#define CFG_FLASH_BASE (0xA0000000) -#define CFG_MAX_FLASH_BANKS (1) /* Max number of - * Flash memory banks - */ -#define CFG_MAX_FLASH_SECT 142 -#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE } - -#else /* CONFIG_R2DPLUS_OLD */ - #define CFG_FLASH_BASE (0xA0000000) -#define CFG_FLASH_CFI_WIDTH 0x04 /* 32bit */ -#define CFG_MAX_FLASH_BANKS (2) -#define CFG_MAX_FLASH_SECT 270 -#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE,\ - CFG_FLASH_BASE + 0x100000,\ - CFG_FLASH_BASE + 0x400000,\ - CFG_FLASH_BASE + 0x700000, } -#endif /* CONFIG_R2DPLUS_OLD */ +#define CFG_MAX_FLASH_BANKS (1) +#define CFG_MAX_FLASH_SECT 256 +#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE } #define CFG_ENV_IS_IN_FLASH -#define CFG_ENV_SECT_SIZE 0x20000 -#define CFG_ENV_SIZE (CFG_ENV_SECT_SIZE) -#define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN) -#define CFG_FLASH_ERASE_TOUT 120000 -#define CFG_FLASH_WRITE_TOUT 500 +#define CFG_ENV_SECT_SIZE 0x40000 +#define CFG_ENV_SIZE (CFG_ENV_SECT_SIZE) +#define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN) /* * SuperH Clock setting diff --git a/include/configs/r7780mp.h b/include/configs/r7780mp.h index 4e895806ae..4c82c5a2fd 100644 --- a/include/configs/r7780mp.h +++ b/include/configs/r7780mp.h @@ -1,7 +1,7 @@ /* * Configuation settings for the Renesas R7780MP board * - * Copyright (C) 2007 Nobuhiro Iwamatsu <iwamatsu@nigauri.org> + * Copyright (C) 2007,2008 Nobuhiro Iwamatsu <iwamatsu@nigauri.org> * Copyright (C) 2008 Yusuke Goda <goda.yusuke@renesas.com> * * See file CREDITS for list of people who contributed to this @@ -31,7 +31,8 @@ #define CONFIG_SH4A 1 #define CONFIG_CPU_SH7780 1 #define CONFIG_R7780MP 1 -#define __LITTLE_ENDIAN 1 +#define CFG_R7780MP_OLD_FLASH 1 +#define __LITTLE_ENDIAN__ 1 /* * Command line configuration. @@ -59,12 +60,6 @@ /* check for keypress on bootdelay==0 */ /*#define CONFIG_ZERO_BOOTDELAY_CHECK*/ -/* Network setting */ -#define CONFIG_NETMASK 255.0.0.0 -#define CONFIG_IPADDR 10.0.192.82 -#define CONFIG_SERVERIP 10.0.0.1 -#define CONFIG_GATEWAYIP 10.0.0.1 - #define CFG_SDRAM_BASE (0x08000000) #define CFG_SDRAM_SIZE (128 * 1024 * 1024) @@ -80,22 +75,30 @@ #define CFG_MEMTEST_START (CFG_SDRAM_BASE) #define CFG_MEMTEST_END (TEXT_BASE - 0x100000) -/* NOR Flash (S29PL127J60TFI130) */ +/* Flash board support */ #define CFG_FLASH_BASE (0xA0000000) -#define CFG_FLASH_CFI_WIDTH FLASH_CFI_32BIT -#define CFG_MAX_FLASH_BANKS (2) -#define CFG_MAX_FLASH_SECT 270 -#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE,\ +#ifdef CFG_R7780MP_OLD_FLASH +/* NOR Flash (S29PL127J60TFI130) */ +# define CFG_FLASH_CFI_WIDTH FLASH_CFI_32BIT +# define CFG_MAX_FLASH_BANKS (2) +# define CFG_MAX_FLASH_SECT 270 +# define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE,\ CFG_FLASH_BASE + 0x100000,\ CFG_FLASH_BASE + 0x400000,\ CFG_FLASH_BASE + 0x700000, } +#else /* CFG_R7780MP_OLD_FLASH */ +/* NOR Flash (Spantion S29GL256P) */ +# define CFG_MAX_FLASH_BANKS (1) +# define CFG_MAX_FLASH_SECT 256 +# define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE } +#endif /* CFG_R7780MP_OLD_FLASH */ #define CFG_LOAD_ADDR (CFG_SDRAM_BASE + 4 * 1024 * 1024) /* Address of u-boot image in Flash */ #define CFG_MONITOR_BASE (CFG_FLASH_BASE) -#define CFG_MONITOR_LEN (112 * 1024) +#define CFG_MONITOR_LEN (256 * 1024) /* Size of DRAM reserved for malloc() use */ -#define CFG_MALLOC_LEN (256 * 1024) +#define CFG_MALLOC_LEN (1204 * 1024) /* size in bytes reserved for initial data */ #define CFG_GBL_DATA_SIZE (256) @@ -110,7 +113,7 @@ #define CFG_FLASH_EMPTY_INFO #define CFG_ENV_IS_IN_FLASH -#define CFG_ENV_SECT_SIZE (16 * 1024) +#define CFG_ENV_SECT_SIZE (256 * 1024) #define CFG_ENV_SIZE (CFG_ENV_SECT_SIZE) #define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN) #define CFG_FLASH_ERASE_TOUT 120000 @@ -141,8 +144,10 @@ #endif /* CONFIG_CMD_PCI */ #if defined(CONFIG_CMD_NET) -/* #define CONFIG_NET_MULTI - #define CONFIG_RTL8169 */ +/* +#define CONFIG_NET_MULTI +#define CONFIG_RTL8169 +*/ /* AX88696L Support(NE2000 base chip) */ #define CONFIG_DRIVER_NE2000 #define CONFIG_DRIVER_AX88796L diff --git a/include/configs/sh7763rdp.h b/include/configs/sh7763rdp.h index d537071a07..7713eaaf59 100644 --- a/include/configs/sh7763rdp.h +++ b/include/configs/sh7763rdp.h @@ -38,11 +38,7 @@ #define CONFIG_CMD_SDRAM #define CONFIG_CMD_FLASH #define CONFIG_CMD_MEMORY -#define CONFIG_CMD_NET -#define CONFIG_CMD_PING #define CONFIG_CMD_ENV -#define CONFIG_CMD_NFS -#define CONFIG_CMD_JFFS2 #define CONFIG_BOOTDELAY -1 #define CONFIG_BOOTARGS "console=ttySC2,115200 root=1f01" @@ -66,12 +62,6 @@ #define CFG_BAUDRATE_TABLE { 115200 } /* List of legal baudrate settings for this board */ -/* Ethernet */ -#define CONFIG_SH_ETHER 1 -#define CONFIG_SH_ETHER_USE_PORT (1) -#define CONFIG_SH_ETHER_PHY_ADDR (0x01) -#define CFG_RX_ETH_BUFFER (8) - /* SDRAM */ #define CFG_SDRAM_BASE (0x8C000000) #define CFG_SDRAM_SIZE (64 * 1024 * 1024) diff --git a/include/environment.h b/include/environment.h index bf9f669127..481ea733db 100644 --- a/include/environment.h +++ b/include/environment.h @@ -107,8 +107,8 @@ typedef struct environment_s { unsigned char data[ENV_SIZE]; /* Environment data */ } env_t; -/* Pointer to function that returns a character from the environment */ -extern unsigned char (*env_get_char)(int); +/* Function that returns a character from the environment */ +unsigned char env_get_char (int); /* Function that returns a pointer to a value from the environment */ unsigned char *env_get_addr(int); @@ -117,4 +117,7 @@ unsigned char env_get_char_memory (int index); /* Function that updates CRC of the enironment */ void env_crc_update (void); +/* [re]set to the default environment */ +void set_default_env(void); + #endif /* _ENVIRONMENT_H_ */ diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h index 71cb2d5c3b..05ba375a82 100644 --- a/include/linux/mtd/mtd.h +++ b/include/linux/mtd/mtd.h @@ -201,13 +201,13 @@ static inline void mtd_erase_callback(struct erase_info *instr) #define MTD_DEBUG_LEVEL3 (3) /* Noisy */ #ifdef CONFIG_MTD_DEBUG -#define DEBUG(n, args...) \ +#define MTDDEBUG(n, args...) \ do { \ if (n <= CONFIG_MTD_DEBUG_VERBOSE) \ printk(KERN_INFO args); \ } while(0) #else /* CONFIG_MTD_DEBUG */ -#define DEBUG(n, args...) do { } while(0) +#define MTDDEBUG(n, args...) do { } while(0) #endif /* CONFIG_MTD_DEBUG */ diff --git a/include/lmb.h b/include/lmb.h index 0283075639..14e8727f06 100644 --- a/include/lmb.h +++ b/include/lmb.h @@ -43,7 +43,7 @@ extern phys_addr_t lmb_alloc_base(struct lmb *lmb, phys_size_t size, ulong align extern phys_addr_t __lmb_alloc_base(struct lmb *lmb, phys_size_t size, ulong align, phys_addr_t max_addr); extern int lmb_is_reserved(struct lmb *lmb, phys_addr_t addr); -extern long lmb_free(struct lmb *lmb, u64 base, u64 size); +extern long lmb_free(struct lmb *lmb, phys_addr_t base, phys_size_t size); extern void lmb_dump_all(struct lmb *lmb); diff --git a/include/lxt971a.h b/include/lxt971a.h index f76c336879..72145e0aa3 100644 --- a/include/lxt971a.h +++ b/include/lxt971a.h @@ -30,15 +30,6 @@ #define __LXT971A_H__ /* PHY definitions (LXT971A) [2] */ -#define PHY_COMMON_CTRL (0x00) -#define PHY_COMMON_STAT (0x01) -#define PHY_COMMON_ID1 (0x02) -#define PHY_COMMON_ID2 (0x03) -#define PHY_COMMON_AUTO_ADV (0x04) -#define PHY_COMMON_AUTO_LNKB (0x05) -#define PHY_COMMON_AUTO_EXP (0x06) -#define PHY_COMMON_AUTO_NEXT (0x07) -#define PHY_COMMON_AUTO_LNKN (0x08) #define PHY_LXT971_PORT_CFG (0x10) #define PHY_LXT971_STAT2 (0x11) #define PHY_LXT971_INT_ENABLE (0x12) @@ -47,97 +38,6 @@ #define PHY_LXT971_DIG_CFG (0x1A) #define PHY_LXT971_TX_CTRL (0x1E) -/* CTRL PHY Control Register Bit Fields */ -#define PHY_COMMON_CTRL_RESET (0x8000) -#define PHY_COMMON_CTRL_LOOPBACK (0x4000) -#define PHY_COMMON_CTRL_SPD_MA (0x2040) -#define PHY_COMMON_CTRL_SPD_10 (0x0000) -#define PHY_COMMON_CTRL_SPD_100 (0x2000) -#define PHY_COMMON_CTRL_SPD_1000 (0x0040) -#define PHY_COMMON_CTRL_SPD_RES (0x2040) -#define PHY_COMMON_CTRL_AUTO_NEG (0x1000) -#define PHY_COMMON_CTRL_POWER_DN (0x0800) -#define PHY_COMMON_CTRL_ISOLATE (0x0400) -#define PHY_COMMON_CTRL_RES_AUTO (0x0200) -#define PHY_COMMON_CTRL_DUPLEX (0x0100) -#define PHY_COMMON_CTRL_COL_TEST (0x0080) -#define PHY_COMMON_CTRL_RES1 (0x003F) - -/* STAT Status Register Bit Fields */ -#define PHY_COMMON_STAT_100BT4 (0x8000) -#define PHY_COMMON_STAT_100BXFD (0x4000) -#define PHY_COMMON_STAT_100BXHD (0x2000) -#define PHY_COMMON_STAT_10BTFD (0x1000) -#define PHY_COMMON_STAT_10BTHD (0x0800) -#define PHY_COMMON_STAT_100BT2FD (0x0400) -#define PHY_COMMON_STAT_100BT2HD (0x0200) -#define PHY_COMMON_STAT_EXT_STAT (0x0100) -#define PHY_COMMON_STAT_RES1 (0x0080) -#define PHY_COMMON_STAT_MF_PSUP (0x0040) -#define PHY_COMMON_STAT_AN_COMP (0x0020) -#define PHY_COMMON_STAT_RMT_FLT (0x0010) -#define PHY_COMMON_STAT_AN_CAP (0x0008) -#define PHY_COMMON_STAT_LNK_STAT (0x0004) -#define PHY_COMMON_STAT_JAB_DTCT (0x0002) -#define PHY_COMMON_STAT_EXT_CAP (0x0001) - -/* AUTO_ADV Auto-neg Advert Register Bit Fields */ -#define PHY_COMMON_AUTO_ADV_NP (0x8000) -#define PHY_COMMON_AUTO_ADV_RES1 (0x4000) -#define PHY_COMMON_AUTO_ADV_RMT_FLT (0x2000) -#define PHY_COMMON_AUTO_ADV_RES2 (0x1000) -#define PHY_COMMON_AUTO_ADV_AS_PAUSE (0x0800) -#define PHY_COMMON_AUTO_ADV_PAUSE (0x0400) -#define PHY_COMMON_AUTO_ADV_100BT4 (0x0200) -#define PHY_COMMON_AUTO_ADV_100BTXFD (0x0100) -#define PHY_COMMON_AUTO_ADV_100BTX (0x0080) -#define PHY_COMMON_AUTO_ADV_10BTFD (0x0040) -#define PHY_COMMON_AUTO_ADV_10BT (0x0020) -#define PHY_COMMON_AUTO_ADV_SEL_FLD_MA (0x001F) -#define PHY_COMMON_AUTO_ADV_802_9 (0x0002) -#define PHY_COMMON_AUTO_ADV_802_3 (0x0001) - -/* AUTO_LNKB Auto-neg Link Ability Register Bit Fields */ -#define PHY_COMMON_AUTO_LNKB_NP (0x8000) -#define PHY_COMMON_AUTO_LNKB_ACK (0x4000) -#define PHY_COMMON_AUTO_LNKB_RMT_FLT (0x2000) -#define PHY_COMMON_AUTO_LNKB_RES2 (0x1000) -#define PHY_COMMON_AUTO_LNKB_AS_PAUSE (0x0800) -#define PHY_COMMON_AUTO_LNKB_PAUSE (0x0400) -#define PHY_COMMON_AUTO_LNKB_100BT4 (0x0200) -#define PHY_COMMON_AUTO_LNKB_100BTXFD (0x0100) -#define PHY_COMMON_AUTO_LNKB_100BTX (0x0080) -#define PHY_COMMON_AUTO_LNKB_10BTFD (0x0040) -#define PHY_COMMON_AUTO_LNKB_10BT (0x0020) -#define PHY_COMMON_AUTO_LNKB_SEL_FLD_MA (0x001F) -#define PHY_COMMON_AUTO_LNKB_802_9 (0x0002) -#define PHY_COMMON_AUTO_LNKB_802_3 (0x0001) - -/* AUTO_EXP Auto-neg Expansion Register Bit Fields */ -#define PHY_COMMON_AUTO_EXP_RES1 (0xFFC0) -#define PHY_COMMON_AUTO_EXP_BASE_PAGE (0x0020) -#define PHY_COMMON_AUTO_EXP_PAR_DT_FLT (0x0010) -#define PHY_COMMON_AUTO_EXP_LNK_NP_CAP (0x0008) -#define PHY_COMMON_AUTO_EXP_NP_CAP (0x0004) -#define PHY_COMMON_AUTO_EXP_PAGE_REC (0x0002) -#define PHY_COMMON_AUTO_EXP_LNK_AN_CAP (0x0001) - -/* AUTO_NEXT Aut-neg Next Page Tx Register Bit Fields */ -#define PHY_COMMON_AUTO_NEXT_NP (0x8000) -#define PHY_COMMON_AUTO_NEXT_RES1 (0x4000) -#define PHY_COMMON_AUTO_NEXT_MSG_PAGE (0x2000) -#define PHY_COMMON_AUTO_NEXT_ACK_2 (0x1000) -#define PHY_COMMON_AUTO_NEXT_TOGGLE (0x0800) -#define PHY_COMMON_AUTO_NEXT_MSG (0x07FF) - -/* AUTO_LNKN Auto-neg Link Partner Rx Reg Bit Fields */ -#define PHY_COMMON_AUTO_LNKN_NP (0x8000) -#define PHY_COMMON_AUTO_LNKN_ACK (0x4000) -#define PHY_COMMON_AUTO_LNKN_MSG_PAGE (0x2000) -#define PHY_COMMON_AUTO_LNKN_ACK_2 (0x1000) -#define PHY_COMMON_AUTO_LNKN_TOGGLE (0x0800) -#define PHY_COMMON_AUTO_LNKN_MSG (0x07FF) - /* PORT_CFG Port Configuration Register Bit Fields */ #define PHY_LXT971_PORT_CFG_RES1 (0x8000) #define PHY_LXT971_PORT_CFG_FORCE_LNK (0x4000) diff --git a/include/nand.h b/include/nand.h index 247d3465db..e1285cdae9 100644 --- a/include/nand.h +++ b/include/nand.h @@ -24,6 +24,9 @@ #ifndef _NAND_H_ #define _NAND_H_ +extern void nand_init(void); + +#ifndef CFG_NAND_LEGACY #include <linux/mtd/compat.h> #include <linux/mtd/mtd.h> #include <linux/mtd/nand.h> @@ -32,7 +35,6 @@ typedef struct mtd_info nand_info_t; extern int nand_curr_device; extern nand_info_t nand_info[]; -extern void nand_init(void); static inline int nand_read(nand_info_t *info, off_t ofs, size_t *len, u_char *buf) { @@ -122,4 +124,5 @@ int nand_get_lock_status(nand_info_t *meminfo, ulong offset); void board_nand_select_device(struct nand_chip *nand, int chip); #endif +#endif /* !CFG_NAND_LEGACY */ #endif diff --git a/include/ns7520_eth.h b/include/ns7520_eth.h index 123e6f4c2a..b509697c2f 100644 --- a/include/ns7520_eth.h +++ b/include/ns7520_eth.h @@ -24,6 +24,7 @@ #ifdef CONFIG_DRIVER_NS7520_ETHERNET +#include <miiphy.h> #include "lxt971a.h" /* The port addresses */ diff --git a/include/ns9750_eth.h b/include/ns9750_eth.h index a6e5889b7b..80c721b900 100644 --- a/include/ns9750_eth.h +++ b/include/ns9750_eth.h @@ -31,6 +31,7 @@ #ifdef CONFIG_DRIVER_NS9750_ETHERNET +#include <miiphy.h> #include "lxt971a.h" #define NS9750_ETH_MODULE_BASE (0xA0600000) diff --git a/include/pci_ids.h b/include/pci_ids.h index d061017911..165456bc8c 100644 --- a/include/pci_ids.h +++ b/include/pci_ids.h @@ -1827,6 +1827,7 @@ #define PCI_DEVICE_ID_INTEL_82545EM_FIBER 0x1011 #define PCI_DEVICE_ID_INTEL_82546EB_FIBER 0x1012 #define PCI_DEVICE_ID_INTEL_82540EM_LOM 0x1015 +#define PCI_DEVICE_ID_INTEL_82545GM_COPPER 0x1026 #define PCI_DEVICE_ID_INTEL_82559 0x1030 #define PCI_DEVICE_ID_INTEL_82562ET 0x1031 |