diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/configs/at91-sama5_common.h | 8 | ||||
| -rw-r--r-- | include/configs/smartweb.h | 4 | ||||
| -rw-r--r-- | include/configs/sunxi-common.h | 42 | ||||
| -rw-r--r-- | include/net.h | 4 |
4 files changed, 37 insertions, 21 deletions
diff --git a/include/configs/at91-sama5_common.h b/include/configs/at91-sama5_common.h index 3d6b0ae0c3..a5990cec03 100644 --- a/include/configs/at91-sama5_common.h +++ b/include/configs/at91-sama5_common.h @@ -53,6 +53,13 @@ #define CONFIG_CMD_DHCP #ifdef CONFIG_SYS_USE_MMC + +#ifdef CONFIG_ENV_IS_IN_MMC +/* Use raw reserved sectors to save environment */ +#define CONFIG_ENV_OFFSET 0x2000 +#define CONFIG_ENV_SIZE 0x1000 +#define CONFIG_SYS_MMC_ENV_DEV 0 +#else /* u-boot env in sd/mmc card */ #define CONFIG_ENV_IS_IN_FAT #define CONFIG_FAT_WRITE @@ -60,6 +67,7 @@ #define FAT_ENV_DEVICE_AND_PART "0" #define FAT_ENV_FILE "uboot.env" #define CONFIG_ENV_SIZE 0x4000 +#endif #define CONFIG_BOOTCOMMAND "if test ! -n ${dtb_name}; then " \ "setenv dtb_name at91-${board_name}.dtb; " \ diff --git a/include/configs/smartweb.h b/include/configs/smartweb.h index d189c3fde9..e11c016aed 100644 --- a/include/configs/smartweb.h +++ b/include/configs/smartweb.h @@ -117,6 +117,9 @@ * */ #define CONFIG_MACB +#define CONFIG_USB_HOST_ETHER +#define CONFIG_USB_ETHER_ASIX +#define CONFIG_USB_ETHER_MCS7830 #define CONFIG_RMII /* use reduced MII inteface */ #define CONFIG_NET_RETRY_COUNT 20 /* # of DHCP/BOOTP retries */ #define CONFIG_AT91_WANTS_COMMON_PHY @@ -182,6 +185,7 @@ /* General Boot Parameter */ #define CONFIG_BOOTDELAY 3 #define CONFIG_BOOTCOMMAND "run flashboot" +#define CONFIG_BOOT_RETRY_TIME 30 #define CONFIG_SYS_CBSIZE 512 #define CONFIG_SYS_MAXARGS 16 #define CONFIG_SYS_PBSIZE \ diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h index 48cc4ed6f6..e1ba7914cd 100644 --- a/include/configs/sunxi-common.h +++ b/include/configs/sunxi-common.h @@ -13,6 +13,7 @@ #ifndef _SUNXI_COMMON_CONFIG_H #define _SUNXI_COMMON_CONFIG_H +#include <asm/arch/cpu.h> #include <linux/stringify.h> #ifdef CONFIG_OLD_SUNXI_KERNEL_COMPAT @@ -39,23 +40,14 @@ #define CONFIG_SYS_THUMB_BUILD /* Thumbs mode to save space in SPL */ #endif -#include <asm/arch/cpu.h> /* get chip and board defs */ - -#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_DM_SERIAL) -# define CONFIG_DW_SERIAL -#endif - -/* - * Display CPU information - */ -#define CONFIG_DISPLAY_CPUINFO - /* Serial & console */ #define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL /* ns16550 reg in the low bits of cpu reg */ #define CONFIG_SYS_NS16550_CLK 24000000 -#ifndef CONFIG_DM_SERIAL +#ifdef CONFIG_DM_SERIAL +# define CONFIG_DW_SERIAL +#else # define CONFIG_SYS_NS16550_REG_SIZE -4 # define CONFIG_SYS_NS16550_COM1 SUNXI_UART0_BASE # define CONFIG_SYS_NS16550_COM2 SUNXI_UART1_BASE @@ -65,6 +57,7 @@ #endif /* CPU */ +#define CONFIG_DISPLAY_CPUINFO #define CONFIG_SYS_CACHELINE_SIZE 64 /* @@ -152,8 +145,8 @@ #define CONFIG_SYS_MMC_ENV_DEV 0 /* first detected MMC controller */ #endif -/* 4MB of malloc() pool */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (4 << 20)) +/* 64MB of malloc() pool */ +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (64 << 20)) /* * Miscellaneous configurable options @@ -282,11 +275,7 @@ extern int soft_i2c_gpio_scl; * The amount of RAM to keep free at the top of RAM when relocating u-boot, * to use as framebuffer. This must be a multiple of 4096. */ -#ifdef CONFIG_VIDEO_LCD_PANEL_EDP_4_LANE_1620M_VIA_ANX9804 -#define CONFIG_SUNXI_MAX_FB_SIZE (12 << 20) -#else -#define CONFIG_SUNXI_MAX_FB_SIZE (9 << 20) -#endif +#define CONFIG_SUNXI_MAX_FB_SIZE (16 << 20) /* Do we want to initialize a simple FB? */ #define CONFIG_VIDEO_DT_SIMPLEFB @@ -393,12 +382,12 @@ extern int soft_i2c_gpio_scl; #define CONFIG_PRE_CON_BUF_SZ 4096 /* Aprox 2 80*25 screens */ /* - * 240M RAM (256M minimum minus space for the framebuffer), + * 160M RAM (256M minimum minus 64MB heap + 32MB for u-boot, stack, fb, etc. * 32M uncompressed kernel, 16M compressed kernel, 1M fdt, * 1M script, 1M pxe and the ramdisk at the end. */ #define MEM_LAYOUT_ENV_SETTINGS \ - "bootm_size=0xf000000\0" \ + "bootm_size=0xa000000\0" \ "kernel_addr_r=" __stringify(SDRAM_OFFSET(2000000)) "\0" \ "fdt_addr_r=" __stringify(SDRAM_OFFSET(3000000)) "\0" \ "scriptaddr=" __stringify(SDRAM_OFFSET(3100000)) "\0" \ @@ -423,7 +412,18 @@ extern int soft_i2c_gpio_scl; #define BOOT_TARGET_DEVICES_USB(func) #endif +/* FEL boot support, auto-execute boot.scr if a script address was provided */ +#define BOOTENV_DEV_FEL(devtypeu, devtypel, instance) \ + "bootcmd_fel=" \ + "if test -n ${fel_booted} && test -n ${fel_scriptaddr}; then " \ + "echo '(FEL boot)'; " \ + "source ${fel_scriptaddr}; " \ + "fi\0" +#define BOOTENV_DEV_NAME_FEL(devtypeu, devtypel, instance) \ + "fel " + #define BOOT_TARGET_DEVICES(func) \ + func(FEL, fel, na) \ BOOT_TARGET_DEVICES_MMC(func) \ BOOT_TARGET_DEVICES_SCSI(func) \ BOOT_TARGET_DEVICES_USB(func) \ diff --git a/include/net.h b/include/net.h index f1671e38de..3a787cc4e9 100644 --- a/include/net.h +++ b/include/net.h @@ -149,7 +149,9 @@ struct udevice *eth_get_dev(void); /* get the current device */ */ struct udevice *eth_get_dev_by_name(const char *devname); unsigned char *eth_get_ethaddr(void); /* get the current device MAC */ + /* Used only when NetConsole is enabled */ +int eth_is_active(struct udevice *dev); /* Test device for active state */ int eth_init_state_only(void); /* Set active state */ void eth_halt_state_only(void); /* Set passive state */ #endif @@ -195,6 +197,8 @@ static inline unsigned char *eth_get_ethaddr(void) return NULL; } +/* Used only when NetConsole is enabled */ +int eth_is_active(struct eth_device *dev); /* Test device for active state */ /* Set active state */ static inline __attribute__((always_inline)) int eth_init_state_only(void) { |